Dynamic Control of Light Direction Enabled by Stimuli-Responsive Liquid Crystal Gratings

Dynamic photomask directed lithography based on electrically stimulated nematic liquid crystal architectures

Lithography technology is a powerful tool for preparing complex microstructures through projecting patterns from static templates with permanent features onto samples. To simplify fabrication and alignment processes, dynamic photomask for multiple configurations preparation becomes increasingly noteworthy. Hereby, we report a dynamic photomask by assembling the electrically stimulated nematic liquid crystal (NLC) into multifarious architectures. This results in reconfigurable and switchable diffraction patterns due to the hybrid phase arising from the NLC molecular orientations. These diffraction patterns are adopted as metamask to produce multiple microstructures with height gradients in one-step exposure and hierarchical microstructures through multiple in-situ exposures using standard photolithography. The fabricated pattern has feature size about 3.2 times smaller than the electrode pattern and can be transferred onto silicon wafer. This strategy can be extended to design diverse microstructures with great flexibility and controllability, offers a promising avenue for fabricating metamaterials via complex structures with simplified lithography processes.

Locomotion behavior of air bubbles on solid surfaces

Air bubbles are a common occurrence in both natural and industrial settings and are a significant topic in the fields of physics, chemistry, engineering, and medicine. The physical phenomena of the contact between bubbles and submerged solid surfaces, as well as the locomotion behavior of bubbles, are worth exploring. Bubbles are generated in an unbounded liquid environment and rise due to unbalanced external forces. Bubbles of different diameters follow different ascending paths, after which they approach, touch, collide, bounce, and finally adsorb to the solid surface, forming a stable three-phase contact line (TPCL). The bubbles are in an unstable state due to the unbalanced external forces on the solid surface and the effects generated by the two-phase contact surface, resulting in different locomotion behaviors on the solid surface. Studying the formation, transport, aggregation, and rupture behaviors of bubbles on solid surfaces can enable the controllable operation of bubbles. This, in turn, can effectively reduce the loss of mechanical apparatus in agro-industrial production activities and improve corresponding production efficiency. Recent research has shown that the degree of bubble wetting on a solid surface is a crucial factor in the locomotion behavior of bubbles on that surface. This has led to significant progress in the study of bubble wetting, which has in turn greatly advanced our understanding of bubble behavior. Based on this, exploring the manipulation process of the directional motion of bubbles is a promising research direction. The locomotion behavior of bubbles on solid surfaces can be controlled by changing external conditions, leading to the integration of bubble behavior in various scientific and technological fields. Studying the dynamics of bubbles in liquids with infinite boundaries is worthwhile. Additionally, the manipulation process and mode of these bubbles is a popular research direction.

Fabrication of Zigzag Parylene Nanofibers in Liquid Crystals with Electric Field-Induced Defect Structures

Liquid crystals (LCs) have been adopted to induce tunable physical properties that dynamically originated from their unique intrinsic properties responding to external stimuli, such as surface anchoring condition and applied electric field, which enables them to be the template for aligning functional guest materials. We fabricate the fiber array from the electrically modulated (in-plain) nematic LC template using the chemical vapor polymerization (CVP) method. Under an electric field, an induced defect structure with a winding number of -1/2 contains a periodic zigzag disclination line. It is known that LC defect structures can trap the guest materials, such as particles and chemicals. However, the resulting fibers grow along the LC directors, not trapped in the defects. To show the versatility of our platform, nanofibers are fabricated on patterned electrodes representing the alphabets 'CVP.' In addition, the semifluorinated moieties are added to fibers to provide a hydrophobic surface. The resultant orientation-controlled fibers will be used in controllable smart surfaces that can be used in sensors, electronics, photonics, and biomimetic surfaces.

Color liquid crystal grating based color holographic 3D display system with large viewing angle

Holographic 3D display is highly desirable for numerous applications ranging from medical treatments to military affairs. However, it is challenging to simultaneously achieve large viewing angle and high-fidelity color reconstruction due to the intractable constraints of existing technology. Here, we conceptually propose and experimentally demonstrate a simple and feasible pathway of using a well-designed color liquid crystal grating to overcome the inevitable chromatic aberration and enlarge the holographic viewing angle, thus enabling large-viewing-angle and color holographic 3D display. The use of color liquid crystal grating allows performing secondary diffraction modulation on red, green and blue reproduced images simultaneously and extending the viewing angle in the holographic 3D display system. In principle, a chromatic aberration-free hologram generation mechanism in combination with the color liquid crystal grating is proposed to pave the way for on such a superior holographic 3D display. The proposed system shows a color viewing angle of ~50.12°, which is about 7 times that of the traditional system with a single spatial light modulator. This work presents a paradigm for achieving desirable holographic 3D display, and is expected to provide a new way for the wide application of holographic display.

Calamitic Liquid Crystals for Reversible Light-Modulated Phase Regulation Based on Arylazopyrazole Photoswitches

The design of responsive liquid crystals enables a diversity of technological applications. Especially photochromic liquid crystals gained a lot of interest in recent years due to the excellent spatiotemporal control of their phase transitions. In this work we present calamitic light responsive mesogens based on a library of arylazopyrazole photoswitches. These compounds show liquid-crystalline behavior as shown by differential scanning calorimetry, grazing incidence X-ray diffraction and polarized optical microscopy. UV-vis spectroscopy and NMR analysis confirmed the excellent photophysical properties in solution and thin film. Additionally, polarized optical microscopy studies of the pristine compounds show reversible phase transition upon irradiation with light. Moreover, as a dopant in the commercially available liquid crystal 4-cyano-4'-pentylbiphenyl (5CB), the temperature range was reduced to ambient temperatures while preserving the photophysical properties. Remarkably, this co-assembled system shows reversible liquid-crystalline to isotropic phase transition upon irradiation with light of different wavelengths. The spatiotemporal control of the phase transition of the liquid crystals offers opportunities in the development of optical devices.

Design principles and implementation of receiver positioning and beam steering for laser power transfer systems

Laser power transfer (LPT) is an emerging technology that can provide convenient and long-range wireless power to the ever-expanding array of electronic devices. One of the biggest challenges in implementing LPT systems is to realize receiver positioning and beam steering (RPBS) for directing power toward the intended target which, however, have only been investigated by a few studies. Herein, a set of design principles is proposed, intended to assist researchers in developing systematic schemes for RPBS. Then, an open-source implementation of RPBS is designed and evaluated using two experimental protocols that simulate real-world receiver movement patterns. Notably, the experimental results show that the implementation enables 3D receiver movement within an operating range exceeding 2-m height and achieves RPBS in ∼1 s, sufficient for most indoor settings. Moreover, strategies that can improve the current design are discussed in detail. Overall, this study provides guidance that can facilitate new ideas and improvements to RPBS among researchers in relevant fields.

Stimuli-responsive grating with a tunable period and a diffraction order

The next-generation diffraction grating not only requires a nonmechanical control and a remote control to generate a diffraction pattern but also requires a tunable period. Here, we propose a stimuli-responsive liquid crystal (LC) phase grating with a tunable period and a diffraction order. The stimuli-responsive LC diffraction grating is composed of periodically arranged electrodes on a double-sided glass substrate. By adjusting the driving scheme, the pitch and diffraction order of the LC grating can be switched between three different modes. The experimental results show that the LC grating has a lower driving voltage (∼5 V). In addition, the tunable LC grating can achieve more diffraction orders, which can be applied to a holographic display to achieve a wide-viewing angle and an enlarged size.

Reconfigurable Grating Diffraction Structural Color in Self-Assembled Colloidal Crystals

Self-assembled colloidal crystals display structural colors due to light diffracted from their microscale, ordered structure. This color arises due to Bragg reflection (BR) or grating diffraction (GD); the latter mechanism is much less explored than the former. Here the design space for generating GD structural color is identified and its relative advantages are demonstrated. Electrophoretic deposition is used to self-assemble crystals with fine crystal grains from colloids of diameter 1.0 µm. The structural color in transmission is tunable across the full visible spectrum. The optimum optical response-represented by both color intensity and saturation-is observed at low layer number (≤5 layers). The spectral response is well predicted by Mie scattering of the crystals. Taken together, the experimental and theoretical results demonstrate that vivid grating colors with high color saturation can be produced from thin layers of micron-sized colloids. These colloidal crystals extend the potential of artificial structural color materials.

High Quality Factor in Solution-Processed Inorganic Microcavities Embedding CsPbBr3 Perovskite Nanocrystals

Optical microcavities grant manipulation over light-matter interactions and light propagation, enabling the fabrication of foundational optical and optoelectronic components. However, the materials used for high-performing systems, mostly bulk inorganics, are typically costly, and their processing is hardly scalable. In this work, we present an alternative way to fabricate planar optical resonators via solely solution processing while approaching the performances of conventional systems. Here, we couple fully solution-processed high dielectric contrast inorganic Bragg mirrors obtained by sol-gel deposition with the remarkable photoluminescence properties of CsPbBr3 perovskite nanocrystals. The approach yields microcavities with a quality factor of ∼220, which is a record value for solution-processed inorganic structures, and a strong emission redistribution resulting in a 3-fold directional intensity enhancement.

Photochromic biodegradable film based on polyvinyl alcohol modified with silver chloride nanoparticles and spirulina; investigation of physicochemical, antimicrobial and optical properties

In this study, biodegradable film was prepared from polyvinyl alcohol (PVA), Silver chloride (AgCl) and spirulina (Sp). Surface morphology, mechanical properties, antioxidant, antimicrobial, optical properties, etc. were investigated. The FTIR results confirmed the effect of AgCl and Sp on PVA structure. Sp increased the moisture content and solubility in water. The XRD results showed the semi-crystalline structure of PVA. AgCl nanoparticles activated the antibacterial property of the film against Escherichia coli and Staphylococcus aureus bacteria and Sp caused a strong increase in the antioxidant property of the film. Examining the light transmittance of films containing AgCl nanoparticles showed that the transmittance of films containing nanoparticles decreased with exposure to sunlight and ultraviolet light with increasing treatment time, which indicates the activation of the photochromic property of films containing AgCl in the presence of light. The results showed the suitable photochromic property of the PVA/AgCl films.

Switching between 3D Surface Topographies in Liquid Crystal Elastomer Coatings Using Two-Step Imprint Lithography

While dynamic surface topographies are fabricated using liquid crystal (LC) polymers, switching between two distinct 3D topographies remains challenging. In this work, two switchable 3D surface topographies are created in LC elastomer (LCE) coatings using a two-step imprint lithography process. A first imprinting creates a surface microstructure on the LCE coating which is polymerized by a base catalyzed partial thiol-acrylate crosslinking step. The structured coating is then imprinted with a second mold to program the second topography, which is subsequently fully polymerized by light. The resulting LCE coatings display reversible surface switching between the two programmed 3D states. By varying the molds used during the two imprinting steps, diverse dynamic topographies can be achieved. For example, by using grating and rough molds sequentially, switchable surface topographies between a random scatterer and an ordered diffractor are achieved. Additionally, by using negative and positive triangular prism molds consecutively, dynamic surface topographies switching between two 3D structural states are achieved, driven by differential order/disorder transitions in the different areas of the film. It is anticipated that this platform of dynamic 3D topological switching can be used for many applications, including antifouling and biomedical surfaces, switchable friction elements, tunable optics, and beyond.

Wrinkled Interfaces: Taking Advantage of Anisotropic Wrinkling to Periodically Pattern Polymer Surfaces

Periodically patterned surfaces can cause special surface properties and are employed as functional building blocks in many devices, yet remaining challenges in fabrication. Advancements in fabricating structured polymer surfaces for obtaining periodic patterns are accomplished by adopting "top-down" strategies based on self-assembly or physico-chemical growth of atoms, molecules, or particles or "bottom-up" strategies ranging from traditional micromolding (embossing) or micro/nanoimprinting to novel laser-induced periodic surface structure, soft lithography, or direct laser interference patterning among others. Thus, technological advances directly promote higher resolution capabilities. Contrasted with the above techniques requiring highly sophisticated tools, surface instabilities taking advantage of the intrinsic properties of polymers induce surface wrinkling in order to fabricate periodically oriented wrinkled patterns. Such abundant and elaborate patterns are obtained as a result of self-organizing processes that are rather difficult if not impossible to fabricate through conventional patterning techniques. Focusing on oriented wrinkles, this review thoroughly describes the formation mechanisms and fabrication approaches for oriented wrinkles, as well as their fine-tuning in the wavelength, amplitude, and orientation control. Finally, the major applications in which oriented wrinkled interfaces are already in use or may be prospective in the near future are overviewed.

Patterned Hydrophobic Liquid Crystalline Fibers Fabricated from Defect Arrays of Reactive Mesogens via Electric Field Modulation

We have fabricated patterned fibers using a small-molecular-weight liquid crystal (LC) and reactive mesogens (RMs) under controlled electric fields in which defect arrays are generated depending on the electrode configuration. For this, the AC electric field with interdigitated electrodes is used to develop versatile defect structures of the LC phase. Hydrophobic LC network (LCN) fibers exhibiting porous morphologies have been made by removing the LC part after the polymerization of RM. The resulting LCN fibers show a surface tension reduction characteristic compared to the neat RM film and a sticky characteristic with the water droplet, suggesting a facile way to fabricate the hydrophobic surface that can be used in microdroplet transport.

Pillararene-Based Supramolecular Polymers for Cancer Therapy

Supramolecular polymers have attracted considerable interest due to their intriguing features and functions. The dynamic reversibility of noncovalent interactions endows supramolecular polymers with tunable physicochemical properties, self-healing, and externally stimulated responses. Among them, pillararene-based supramolecular polymers show great potential for biomedical applications due to their fascinating host-guest interactions and easy modification. Herein, we summarize the state of the art of pillararene-based supramolecular polymers for cancer therapy and illustrate its developmental trend and future perspective.

Selectively reflective edge detection system based on cholesteric liquid crystal

Optical analog computing has attracted extensive interest in image processing and optical engineering in recent decades. Here, we propose a reflective optical analog computing system based on a cholesteric liquid crystal (CLC), which simplifies the traditional optical analog computing system by taking advantage of the CLC reflecting the light with specified circular polarization and provides a new, to the best of our knowledge, idea for the integration of optical analog computing systems. Meanwhile, we present results in which a section of an insect foot is observed using the reflective optical analog computing system, which may develop valuable applications in biomedical imaging.

Induced CPL-Active Materials Based on Chiral Supramolecular Co-Assemblies

Circularly polarized luminescence (CPL) has attracted much interest due to its potential applications on chiral photonic techniques and optoelectronic materials science. As known, dissymmetry factor (g_em ) of CPL is one essential factor for evaluating the features of CPL-active materials. Much attention has focused on how to increase the g_em value, which is one of the most important issues for CPL practical applications. Recently, more and more works have demonstrated that chiral supramolecular could provide the significant strategy to improve the g_em value through the orderly helical superstructure of chiral building blocks. Normally, this kind of chiral supramolecular assembly process can be accompanied by chirality transfer and induction mechanism, which can promote the amplification effect on the induced CPL of achiral dyes. In this review, we fully summarized recent advances on the induced CPL-active materials of chiral supramolecular co-assemblies, their applications in circularly polarized organic light-emitting diodes (CP-OLEDs) and current challenges.

Liquid crystal random lasers

The enthusiasm for research on liquid crystal random lasers (LCRLs) is driven by their unusual optical properties and promising potential for broad applications in manufacturing, communications, medicine and entertainment. From this perspective, we will summarize the most attractive advances in the development of LCRLs in the last decade and propose future prospects. This article will begin with a fundamental description of LCRLs, including the principle of laser generation and a description of LC substances. Then, we spend several chapters on the lasing performance control methods of LCRLs, including random lasing wavelength, threshold, and polarization properties. In addition, we analyze how the LC chiral agent structures, LC core-shell structures and new light-amplifying materials affect the design of LCRL devices. In the last chapter, we discuss the application of LCRLs in 3D displays, information encryption, biochemical sensing and other optoelectronics devices and finally end the perspective with LCRLs' likely directions in future research.

Calixarene Functionalized Supramolecular Liquid Crystals and Their Diverse Applications

Liquid crystals are considered to be the fourth state of matter with an intermediate order and fluidity in comparison to solids and liquids. Calixarenes are among one of the most versatile families of building blocks for supramolecular chemistry due to their unique vaselike structure that can be chemically engineered to have different shapes and sizes. During the last few decades, calixarenes have drawn much attention in the field of supramolecular chemistry due to their diverse applications in the fields of ion and molecular recognition, ion-selective electrodes for catalysis, drug delivery, gelation, organic electronics and sensors, etc. Imbuing liquid crystallinity to the calixarene framework leads to functionalized calixarene derivatives with fluidity and order. Columnar self-assembly of such derivatives in particular enhance the charge migration along the column due to the 1D stacking due to the enhanced π-π overlap. Considering limited reports and reviews on this new class of calixarene based liquid crystals, a comprehensive account of the synthesis of calixarene liquid crystals along with their mesomorphic behavior and potential applications are presented in this review.

Optical vortex beam controlling based on fork grating stored in a dye-doped liquid crystal cell

In this paper, we investigate the generation and controlling of the optical vortex beam using a dye-doped liquid crystal (DDLC) cell. The spatial distribution of the quasi-sinusoidal orientation of the liquid crystal molecules creates a quasi-sinusoidal phase grating (PG) in the DDLC cell. Depending on the incident light pattern, Trans to Cis photoisomerization of the dye molecules affects the orientation of the liquid crystal molecules. To do so, an amplitude fork grating (FG) is used as a mask, and its pattern is stored in the cell by a pattern printing method as the PG. One of the particular features of the stored grating in the cell is its capability in the diffraction efficiency controlled by the applied electric field. The results show, based on the central defect in the FG pattern, the diffracted probe beam in different orders is optical vortices. As a new technique, this type of stored pattern acts like an amplitude grating but according to the results, its structure is in fact a PG. This technique leads to the vortex beam switching capability by applying an electric field to the cell. The results show that by applying 22 V, all the diffraction orders vanish. Meanwhile, the vortex beams reappear by removing the applied voltage. The diffraction efficiency of the vortex beams as well as its generation dependency on the polarization of the incident beam studied. The maximum efficiency of the first diffraction order for linear polarized incident beam was obtained at 0 V, about 8%. Based on the presented theory, a simulation has been done which shows the Cis form of the dye molecules has been able to change the angle of LC molecules on average about 12.7°. The study of diffracted beam profiles proves that they are electrically controllable vortex beams.

Amphiphilicity-Controlled Polychromatic Emissive Supramolecular Self-Assemblies for Highly Sensitive and Efficient Artificial Light-Harvesting Systems

Dynamic sequential control of photoluminescence by supramolecular approaches has become a great issue in supramolecular chemistry. However, developing a systematic strategy to construct polychromatic photoluminescent supramolecular self-assemblies for improving the efficiency and sensitivity of artificial light-harvesting systems still remains a challenge. Here, a series of amphiphilicity-controlled supramolecular self-assemblies with polychromatic fluorescence based on lower-rim hexyl-modified sulfonatocalix[4]arene (SC4A6) and N-alkyl-modified p-phenylene divinylpyridiniums (PVPn, n = 2-7) as efficient light-harvesting platforms is reported. PVPn shows wide ranges of polychromatic fluorescence by co-assembling with SC4A6, whose emission trends significantly depend on the modified alkyl-chains of PVPn. The formed PVPn-SC4A6 co-assemblies as light-harvesting platforms are extremely sensitive for transferring the energy to two near-infrared emissive acceptors, Nile blue (NiB) and Rhodamine 800. After optimizing the amphiphilicity of PVPn-SC4A6 systems, the PVPn-SC4A6-NiB light-harvesting systems achieve an ultrasensitive working concentration for NiB (2 nm) and an ultrahigh antenna effect up to 91.0. Furthermore, the two different kinds of light-harvesting nanoparticles exhibit good performance on near-infrared imaging in the Golgi apparatus and mitochondria, respectively.

A Review of Stimuli-Responsive Smart Materials for Wearable Technology in Healthcare: Retrospective, Perspective, and Prospective

In recent years thanks to the Internet of Things (IoT), the demand for the development of miniaturized and wearable sensors has skyrocketed. Among them, novel sensors for wearable medical devices are mostly needed. The aim of this review is to summarize the advancements in this field from current points of view, focusing on sensors embedded into textile fabrics. Indeed, they are portable, lightweight, and the best candidates for monitoring biometric parameters. The possibility of integrating chemical sensors into textiles has opened new markets in smart clothing. Many examples of these systems are represented by color-changing materials due to their capability of altering optical properties, including absorption, reflectance, and scattering, in response to different external stimuli (temperature, humidity, pH, or chemicals). With the goal of smart health monitoring, nanosized sol-gel precursors, bringing coupling agents into their chemical structure, were used to modify halochromic dyestuffs, both minimizing leaching from the treated surfaces and increasing photostability for the development of stimuli-responsive sensors. The literature about the sensing properties of functionalized halochromic azo dyestuffs applied to textile fabrics is reviewed to understand their potential for achieving remote monitoring of health parameters. Finally, challenges and future perspectives are discussed to envisage the developed strategies for the next generation of functionalized halochromic dyestuffs with biocompatible and real-time stimuli-responsive capabilities.

Linear and Nonlinear Optical Properties of Azobenzene Derivatives Modified with an (Amino)naphthalene Moiety

The design of two-photon absorbing azobenzene (AB) derivatives has received much attention; however, the two-photon absorption (2PA) properties of bis-conjugated azobenzene systems are relatively less explored. Here, we present the synthesis of six azobenzene derivatives and three bis-azobenzenes substituted (or not) at para position(s) with one or two amino group(s). Their linear and nonlinear absorption properties are studied experimentally and theoretically. The switching behavior and thermal stability of the Z-isomer are studied for unsubstituted mono- (1a, 2a) and bis-azobenzene (3a) compounds, showing that when the length of the π system increases, the half-life of the Z-isomer decreases. Moreover, along with the increase of π-conjugation, the photochromic characteristics are impaired and the photostationary state (PSS) related to E-Z photoisomerization is composed of 89% of the Z-isomer for 2a and 26% of the Z-isomer for 3a. Importantly, the 2PA cross-section increases almost five-fold on extending the π-conjugation (2a vs 3a) and by about one order of magnitude when comparing two systems: the unsubstituted π-electron one (2a, 3a) with D-π-D (2c, 3c). This work clarifies the contribution of π-conjugation and substituent effects to the linear and nonlinear optical properties of mono- and bis-azobenzene compounds based on the experimental and theoretical approaches.

Laser Fabrication of Highly Ordered Nanocomposite Subwavelength Gratings

Optical nanogratings are widely used for different optical, photovoltaic, and sensing devices. However, fabrication methods of highly ordered gratings with the period around optical wavelength range are usually rather expensive and time consuming. In this article, we present high speed single-step approach for fabrication of highly ordered nanocomposite gratings with a period of less than 355 nm. For the purpose, we used commercially available nanosecond-pulsed fiber laser system operating at the wavelength of 355 nm. One-dimensional and two-dimensional nanostructures can be formed by direct laser treatment with different scan speed and intensity. These structures exhibit not only dispersing, but also anisotropic properties. The obtained results open perspectives for easier mass production of polarization splitters and filters, planar optics, and also for security labeling.

Chiral Assemblies of Planar and Achiral meta-Arylene Ethynylene Macrocycles Induced by Saccharide Recognition

We created chiral assemblies of planar and achiral macrocycles by saccharide recognition. To achieve this, we synthesized stackable meta-arylene ethynylene macrocycles consisting of pyridine-acetylene-phenol and pyridine-acetylene-aniline units. ¹H NMR, absorption, and fluorescence emission spectroscopy indicated that these macrocycles formed 1:1 and 2:1 complexes with lipophilic alkyl glycosides. The 2:1 complex of the pyridine-acetylene-phenol macrocycle showed induced circular dichroism (ICD) bands, meaning that two achiral macrocycles are arranged in an asymmetrically twisted manner. CD spectroscopy revealed that the helical sense was affected by the chirality of guest saccharides. On the other hand, strong CD bands were observed after solid-liquid extraction of native saccharides into lipophilic solvents using the pyridine-acetylene-aniline macrocycle.

Tunable liquid crystal grating based holographic 3D display system with wide viewing angle and large size

As one of the most ideal display approaches, holographic 3-dimensional (3D) display has always been a research hotspot since the holographic images reproduced in such system are very similar to what humans see the actual environment. However, current holographic 3D displays suffer from critical bottlenecks of narrow viewing angle and small size. Here, we propose a tunable liquid crystal grating-based holographic 3D display system with wide viewing angle and large size. Our tunable liquid crystal grating, providing an adjustable period and the secondary diffraction of the reconstructed image, enables to simultaneously implement two different hologram generation methods in achieving wide viewing angle and enlarged size, respectively. By using the secondary diffraction mechanism of the tunable liquid crystal grating, the proposed system breaks through the limitations of narrow viewing angle and small size of holographic 3D display. The proposed system shows a viewing angle of 57.4°, which is nearly 7 times of the conventional case with a single spatial light modulator, and the size of the reconstructed image is enlarged by about 4.2. The proposed system will have wide applications in medical diagnosis, advertising, education and entertainment and other fields.

Light-activated photodeformable supramolecular dissipative self-assemblies

Dissipative self-assembly, one of fundamentally important out-of-equilibrium self-assembly systems, can serve as a controllable platform to exhibit temporal processes for various non-stimulus responsive properties. However, construction of light-fueled dissipative self-assembly structures with transformable morphology to modulate non-photoresponsive properties remains a great challenge. Here, we report a light-activated photodeformable dissipative self-assembly system in aqueous solution as metastable fluorescent palette. Zwitterionic sulfonato-merocyanine is employed as a light-induced amphiphile to co-assemble with polyethyleneimine after light irradiation. The formed spherical nanoparticles spontaneously transform into cuboid ones in the dark with simultaneous variation of the particle sizes. Then the two kinds of nanoparticles can reversibly interconvert to each other by periodical light irradiation and thermal relaxation. Furthermore, after loading different fluorophores exhibiting red, green, blue emissions and their mixtures, all these fluorescent dissipative deformable nanoparticles display time-dependent fluorescence variation with wide range of colors. Owing to the excellent performance of photodeformable dissipative assembly platform, the light-controlled fluorescence has achieved a 358-fold enhancement. Therefore, exposing the nanoparticles loaded with fluorophores to light in a spatially controlled manner allows us to draw multicolored fluorescent images that spontaneously disappeared after a specific period of time.

Dissipative self-assembly can serve as a controllable platform to exhibit temporal processes for various non-stimulus responsive properties but construction of light-fueled dissipative self-assembly structures with transformable morphology to modulate non-photoresponsive properties remains a challenge. Here, the authors report a light-activated photodeformable dissipative self-assembly system in aqueous solution as metastable fluorescent platform.

Dynamically actuated soft heliconical architecture via frequency of electric fields

Dynamic electric field frequency actuated helical and spiral structures enable a plethora of attributes for advanced photonics and engineering in the contemporary era. Nevertheless, leveraging the frequency responsiveness of adaptive devices and systems within a broad dynamic range and maintaining restrained high-frequency induced heating remain challenging. Herein, we establish a frequency-actuated heliconical soft architecture that is quite distinct from that of common frequency-responsive soft materials. We achieve reversible modulation of the photonic bandgap in a wide spectral range by delicately coupling the frequency-dependent thermal effect, field-induced dielectric torque and elastic equilibrium. Furthermore, an information encoder prototype without the aid of complicated algorithm design is established to analogize an information encoding and decoding process with a more convenient and less costly way. A technique for taming and tailoring the distribution of the pitch length is exploited and embodied in a prototype of a spatially controlled soft photonic cavity and laser emission. This work demonstrates a distinct frequency responsiveness in a heliconical soft system, which may not merely inspire the interest in field-assisted bottom-up molecular engineering of soft matter but also facilitate the practicality of adaptive photonics.

Frequency responsiveness within a broad dynamic range in adaptive systems while also reducing high-frequency induced heating remains a challenge for advanced photonics. Here, authors report a frequency-actuated heliconical soft architecture with reversible modulation of the photonic bandgap in a wide spectral range.

Modularizable Liquid-Crystal-Based Open Surfaces Enable Programmable Chemical Transport and Feeding using Liquid Droplets

Droplet-based miniature reactors have attracted interest in both fundamental studies, for the unique reaction kinetics they enable, and applications in bio-diagnosis and material synthesis. However, the precise and automatic feeding of chemicals, important for the delicate reactions in these miniaturized chemical reactors, either requires complex, high-cost microfluidic devices or lacks the capability to maintain a pinning-free droplet movement. Here, the design and synthesis of a new class of liquid crystal (LC)-based open surfaces, which enable a controlled chemical release via a programmable LC phase transition without sacrificing the free transport of the droplets, are reported. It is demonstrated that their intrinsic slipperiness and self-healing properties enable a modularizable assembly of LC surfaces that can be loaded with different chemicals to achieve a wide range of chemical reactions carried out within the droplets, including sequential and parallel chemical reactions, crystal growth, and polymer synthesis. Finally, an LC-based chemical feeding device is developed that can automatically control the release of chemicals to direct the simultaneous differentiation of human induced pluripotent stem cells into endothelial progenitor cells and cardiomyocytes. Overall, these LC surfaces exhibit desirable levels of automation, responsiveness, and controllability for use in miniature droplet carriers and reactors.

Dynamic Surface Wrinkles for In Situ Light-Driven Dynamic Gratings

Dynamic diffraction gratings (DDGs) are considered as one of the most promising technologies for application in smart optical devices because of their in situ dynamic regulation of light propagation on demand; however, it is still a challenge to fabricate dynamic periodic micro/nanostructures due to limited materials and processes. Here, a facile and feasible strategy to construct a near-infrared (NIR) radiation-driven DDG is developed based on a double-sided surface pattern, which is fabricated by dynamic wrinkles and/or soft-imprinted static wrinkles. Poly(dimethylsiloxane) (PDMS) containing carbon nanotubes (CNTs) serves as the substrate, and wrinkles are formed on both sides. The resulting double-sided wrinkle pattern can be used as a DDG to generate various adjustable two-dimensional (2D) diffraction patterns driven by NIR light. Furthermore, with various combinations of wrinkles, we demonstrated a single-sided responsive DDG and a double-sided responsive DDG to realize the evolution of diffraction patterns from 2D to one-dimensional (1D) and 2D to zero-dimensional (0D), respectively. The results provide an alternative for DDGs that will have wide applications in smart display, sensing, and imaging systems.

Photo‐Imprinting of the Helical Organization in Liquid‐Crystal Networks Using Achiral Monomers and Circularly Polarized Light

Control over molecular motion is facilitated in materials with highly ordered nanoscale structures. Here we report on the fabrication of cholesteric liquid‐crystal networks by circularly polarized light irradiation, without the need for chiral dopant or plasticizer. The polymer network is obtained by photopolymerization of a smectic achiral diacrylate mesogen consisting of an azobenzene core and discrete oligodimethylsiloxane tails. The synchronous helical photoalignment and photopolymerization originate from the cooperative movement of the mesogens ordered in well‐defined responsive structures, together with the flexibility of the oligodimethylsiloxane blocks. The resulting thin films show excellent thermal stability and light‐induced memory features with reversible responses. Additionally, we demonstrate the fabrication of photo‐patterned films of liquid‐crystal networks with opposite helical senses. These findings provide a new method to make light‐controllable chiroptical materials with exciting applications in optics and photonics.

Stimuli-Responsive Liquid-Crystal-Infused Porous Surfaces for Manipulation of Underwater Gas Bubble Transport and Adhesion

Biomimetic artificial surfaces that enable the manipulation of gas bubble mobility have been explored in a wide range of applications in nanomaterial synthesis, surface defouling, biomedical diagnostics, and therapeutics. Although many superhydrophobic surfaces and isotropic-lubricant-infused porous surfaces have been developed to manipulate gas bubbles, the simultaneous control over the adhesion and transport of gas bubbles underwater remains a challenge. Thermotropic liquid crystals (LCs), a class of structured fluids, provide an opportunity to tune the behavior of gas bubbles through LC mesophase transitions using a variety of external stimuli. Using this central idea, the design and synthesis of LC-infused porous surfaces (LCIPS) is reported and the effects of the LC mesophase on the transport and adhesion of gas bubbles on LCIPS immersed in water elucidated. LCIPS are demonstrated to be a promising class of surfaces with an unprecedented level of responsiveness and functionality, which enables the design of cyanobacteria-inspired object movement, smart catalysts, and bubble gating devices to sense and sort volatile organic compounds and control oxygen levels in biomimetic cell cultures.

Interfacial AIE for Orthogonal Integration of Holographic and Fluorescent Dual-Thermosensitive Images

Orthogonal integration of thermosensitive images is of vital significance for advanced anticounterfeiting, which however remains formidably challenging due to the trade-off that facile thermoresponse needs easy molecular motion while robust imaging requires molecular restriction. Herein, a viable approach is demonstrated to tackle the challenge by in situ fixing a predesigned aggregation induced emission luminogen (AIEgen) at the polymer/liquid crystal (LC) interface via precisely controlled interfacial engineering, in which the AIEgen is enriched in LC phases during polymerization induced phase separation and subsequently driven to the interface by the interfacial thiol-ene click reaction. Crosstalk-free integration of holographic and fluorescent dual-thermosensitive images with high sensitivity, high contrast ratio, and robust performance is successfully realized in a single unit, attributed to the simultaneously LC-facilitated AIEgen molecular motion and polymer-restricted AIEgen diffusion at the interface. The exciting characteristics of these orthogonally integrated dual images will enable them to prevent illegal replication and thus are expected to be promising for high-security-level anticounterfeiting applications.

Overview of Liquid Crystal Biosensors: From Basic Theory to Advanced Applications

Liquid crystals (LCs), as the remarkable optical materials possessing stimuli-responsive property and optical modulation property simultaneously, have been utilized to fabricate a wide variety of optical devices. Integrating the LCs and receptors together, LC biosensors aimed at detecting various biomolecules have been extensively explored. Compared with the traditional biosensing technologies, the LC biosensors are simple, visualized, and efficient. Owning to the irreplaceable superiorities, the research enthusiasm for the LC biosensors is rapidly rising. As a result, it is necessary to overview the development of the LC biosensors to guide future work. This article reviews the basic theory and advanced applications of LC biosensors. We first discuss different mesophases and geometries employed to fabricate LC biosensors, after which we introduce various detecting mechanisms involved in biomolecular detection. We then focus on diverse detection targets such as proteins, enzymes, nucleic acids, glucose, cholesterol, bile acids, and lipopolysaccharides. For each of these targets, the development history and state-of-the-art work are exhibited in detail. Finally, the current challenges and potential development directions of the LC biosensors are introduced briefly.

Recent Advances in Planar Optics-Based Glasses-Free 3D Displays

Glasses-free three-dimensional (3D) displays are one of the technologies that will redefine human-computer interfaces. However, many geometric optics-based 3D displays suffer from a limited field of view (FOV), severe resolution degradation, and visual fatigue. Recently, planar optical elements (e.g., diffraction gratings, diffractive lenses and metasurfaces) have shown superior light manipulating capability in terms of light intensity, phase, and polarization. As a result, planar optics hold great promise to tackle the critical challenges for glasses-free 3D displays, especially for portable electronics and transparent display applications. In this review, the limitations of geometric optics-based glasses-free 3D displays are analyzed. The promising solutions offered by planar optics for glasses-free 3D displays are introduced in detail. As a specific application and an appealing feature, augmented reality (AR) 3D displays enabled by planar optics are comprehensively discussed. Fabrication technologies are important challenges that hinder the development of 3D displays. Therefore, multiple micro/nanofabrication methods used in 3D displays are highlighted. Finally, the current status, future direction and potential applications for glasses-free 3D displays and glasses-free AR 3D displays are summarized.

Integrating Boronic Esters and Anthracene into Covalent Adaptable Networks toward Stimuli-Responsive Elastomers

Stimuli-responsive polymer materials have a promising potential application in many areas. However, integrating multi-stimuli into one elastomer is still a challenge. Here, we utilized boronic esters and anthracene to prepare a cross-linked poly(styrene-butadiene-styrene) (SBS) which was endowed with responsiveness to three stimuli (light, heat, and alcohols). SBS was first functionalized with a certain amount of dihydroxyl groups via a thiol-ene "click" reaction between unsaturated double bonds in PB block and thioglycerol. Then, 9-anthraceneboronic acid was applied to form a cross-linked SBS network upon heat and ultraviolet radiation (λ = 365 nm). The prepared elastomer was demonstrated to be stimuli-responsive based on the dynamic nature of boronic esters and the reversible dimerization of anthracene. In addition, the mechanical properties of the elastomer could be regulated continuously owing to the stimulus responsiveness to ultraviolet or heat.

Holo-imprinting polarization optics with a reflective liquid crystal hologram template

Liquid crystal polarization optics based on photoalignment technique has found pervasive applications in next-generation display platforms like virtual reality and augmented reality. Its large-scale fabrication, however, remains a big challenge due to the high demands in small feature size, fast processing speed, and defects-free alignment quality during the photoalignment process, especially for large-angle reflective devices. Here we propose a new concept of holo-imprinting based on non-contact replication of polarization pattern with a reflective liquid crystal hologram as a template. Our theoretical analysis and experimental results validate the possibility of generating a high-quality polarization pattern exploiting the self-interfering beams of reflective holograms. The method can be extended to numerous devices, from transmissive to reflective, from small angle to large angle, and from grating, lens, to freeform optics. Its widespread impact on the fabrication of liquid crystal polarization optics for advanced display and imaging systems is foreseeable.

Smart Diffraction Gratings based on the Shape Memory Effect

The shape memory effect is the capability of a structure or a material that can be deformed into a certain temporary shape under the external stimulus, and the shape will be fixed without the stimulus. The recovery process can be triggered by the same stimulus. The intelligent tunable device based on the shape memory effect has a wide range of applications in many fields. In the optical field, smart diffraction gratings can accomplish in-situ optical diffraction according to requirements, meeting the high demand in the next generation of smart optical systems. However, it is essential to construct high-precision grating structures based on shape memory materials. Here, a smart diffraction grating based on UV-curable shape memory polymer via two-beam interference is reported, with nano-scale precision, excellent deformability and recovery ability and adjustable spectroscopic performance. More importantly, based on the shape memory effect, grating structures that surpass the precision of the fabrication system can be obtained. The smart grating exhibits rapid deformation and recovery upon heating and long-term storage capability, which facilitates them to be applied in optics, electronics and integrated sensing. This article is protected by copyright. All rights reserved.

Self-assembled inorganic chiral superstructures

Controlled assembly of inorganic nanoparticles with different compositions, sizes and shapes into higher-order structures of collective functionalities is a central pursued objective in chemistry, physics, materials science and nanotechnology. The emerging chiral superstructures, which break spatial symmetries at the nanoscale, have attracted particular attention, owing to their unique chiroptical properties and potential applications in optics, catalysis, biology and so on. Various bottom-up strategies have been developed to build inorganic chiral superstructures based on the intrinsic configurational preference of the building blocks, external fields or chiral templates. Self-assembled inorganic chiral superstructures have demonstrated significant superior optical activity from the strong electric/magnetic coupling between the building blocks, as compared with the organic counterparts. In this Review, we discuss recent progress in preparing self-assembled inorganic chiral superstructures, with an emphasis on the driving forces that enable symmetry breaking during the assembly process. The chiroptical properties and applications are highlighted and a forward-looking trajectory of where research efforts should be focused is discussed.

Visible Light-Driven Molecular Switches and Motors: Recent Developments and Applications

Inspired by human vision, a diverse range of light-driven molecular switches and motors has been developed for fundamental understanding and application in material science and biology. Recently, the design and synthesis of visible light-driven molecular switches and motors have been actively pursued. This emerging trend is partly motivated to avoid the harmful effects of ultraviolet light, which was necessary to drive the classical molecular switches and motors at least in one direction, impeding their employment in biomedical and photopharmacology applications. Moreover, visible light-driven molecular switches and motors are demonstrated to enable benign optical materials for advanced photonic devices. Therefore, during the past several years, visible light-driven molecular switches based on azobenzene derivatives, diarylethenes, 1,2-dicyanodithienylethenes, hemithioindigo derivatives, iminothioindoxyls, donor-acceptor Stenhouse adducts, and overcrowded alkene based molecular motors have been judiciously designed, synthesized, and used in the development of functional materials and systems for a wide range of applications. In this Review, we present the recent developments toward the design of visible light-driven molecular switches and motors, with their applications in the fabrication of functional materials and systems in material science, bioscience, pharmacology, etc . The visible light-driven molecular switches and motors realized so far undoubtedly widen the scope of these interesting compounds for technological and biological applications. We hope this Review article could provide additional impetus and inspire further research interests for future exploration of visible light-driven advanced materials, systems, and devices.

Liquid Crystals: Versatile Self-Organized Smart Soft Materials

Smart soft materials are envisioned to be the building blocks of the next generation of advanced devices and digitally augmented technologies. In this context, liquid crystals (LCs) owing to their responsive and adaptive attributes could serve as promising smart soft materials. LCs played a critical role in revolutionizing the information display industry in the 20th century. However, in the turn of the 21st century, numerous beyond-display applications of LCs have been demonstrated, which elegantly exploit their controllable stimuli-responsive and adaptive characteristics. For these applications, new LC materials have been rationally designed and developed. In this Review, we present the recent developments in light driven chiral LCs, i.e., cholesteric and blue phases, LC based smart windows that control the entrance of heat and light from outdoor to the interior of buildings and built environments depending on the weather conditions, LC elastomers for bioinspired, biological, and actuator applications, LC based biosensors for detection of proteins, nucleic acids, and viruses, LC based porous membranes for the separation of ions, molecules, and microbes, living LCs, and LCs under macro- and nanoscopic confinement. The Review concludes with a summary and perspectives on the challenges and opportunities for LCs as smart soft materials. This Review is anticipated to stimulate eclectic ideas toward the implementation of the nature's delicate phase of matter in future generations of smart and augmented devices and beyond.

Patterned Electrode Assisted One-Step Fabrication of Biomimetic Morphing Hydrogels with Sophisticated Anisotropic Structures

Anisotropic structures are ubiquitous in nature, affording fascinating morphing behaviors. Biomimetic morphing materials can be developed by spatially controlling the orientations of molecules or nanofillers that produce anisotropic responses and internal stresses under external stimuli. However, it remains a serious challenge to fabricate materials with sophisticated anisotropic architectures. Here, a facile strategy to fabricate morphing hydrogels with elaborately ordered structures of nanosheets, which are oriented under distributed electric field and immobilized by polymerization to form a poly(N-isopropylacrylamide) matrix, is proposed. Diverse sophisticated anisotropic structures are obtained by engineering the electric field through the patterns and relative locations of the electrodes. Upon heating, the monolithic hydrogels with through-thickness and/or in-plane gradients in orientation of the nanosheets deform into various three-dimensional configurations. After incorporating gold nanoparticles, the hydrogels become photoresponsive and capable of programmable motions, for example, dynamic twisting and flipping under spatiotemporal stimuli. Such a strategy of using patterned electrodes to generate distributed electric field should be applicable to systems of liquid crystals or charged particles/molecules to direct orientation or electrophoresis and form functional structures. The biomimetically architectured hydrogels would be ideal materials to develop artificial muscles, soft actuators/robots, and biomedical devices with versatile applications.

Combined electric and photocontrol of selective light reflection at an oblique helicoidal cholesteric liquid crystal doped with azoxybenzene derivative

An oblique helicoidal cholesteric liquid crystal Ch_{OH} represents a unique optical material with a single-harmonic periodic modulation of the refractive index and a pitch that can be tuned by an electric or magnetic field in a broad range from submicrometers to micrometers. In this work, we demonstrate that the oblique helicoidal cholesteric doped with azoxybenzene molecules can be tuned by both the electric field and light irradiation. The tuning mechanism is explained by the kinetics of trans-cis photoisomerization of the azoxybenzene molecules. At a fixed voltage, UV irradiation causes a redshift of the reflection peak by more than 200 nm. The effect is caused by an increase of the bend elastic constant of Ch_{OH} under irradiation. The demonstrated principle has the potential for applications such as smart windows, sensors, tunable lasers, and filters.

Thermally responsive polymer-dispersed liquid crystal diffusers fabricated using laser speckle pattern irradiation

This study examined the thermal response of polymer-dispersed liquid crystal (PDLC) diffusers, patterned using a two-lens imaging system. Optical modulation was achieved by modifying the PDLC transmittance using temperature-induced changes to liquid crystal (LC) orientation. PDLCs with controllable scattering properties were obtained by irradiating LC-polymer composites with laser speckle patterns. The variation of the scattering characteristics of the PDLCs with temperature, average speckle size, and LC orientation order was analyzed to determine the most suitable parameters for a diffuser for smart window solar-ray control applications. The findings of these experiments demonstrate that using speckle patterns, a one-time laser exposure process, can provide a simple fabrication method of novel optical devices.