Modulation of Molecular Spatial Distribution and Chemisorption with Perforated Nanosheets for Ethanol Electro-oxidation

Architecting Ni3Se4-NiSe2-Co3O4 Triple-Interface Heterostructure on MXene Nanosheets for Boosting Water Splitting by Electronic Modulation and Interface Effects

Strategically engineering electrocatalysts with optimized interfacial electronic architectures and accelerated reaction dynamics is pivotal for augmenting hydrogen generation via alkaline water electrolysis on an industrial scale. Herein, a novel triple-interface heterostructure Ni3Se4-NiSe2-Co3O4 nanoarrays are designed anchored on Ti3C2Tx MXene (Ni3Se4-NiSe2-Co3O4/MXene) with significant work function difference (ΔΦ) as bifunctional electrocatalysts for water electrolysis. Theoretical calculations combined with experiments uncover the pivotal role of the interface-induced electric field in steering charge redistribution, which in turn modulates the adsorption and desorption kinetics of reaction intermediates. Furthermore, the synergistic interaction between Ni3Se4-NiSe2-Co3O4 and Ti3C2Tx MXene nanosheets endows the hybrids with a large electrochemical surface area, abundantly active sites, and high conductivity. Thus, Ni3Se4-NiSe2-Co3O4/MXene manifests exceptional catalytic prowess for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). In addition, the Ni3Se4-NiSe2-Co3O4/MXene electrocatalyst in the water electrolyzer delivers excellent performance and maintains commendable stability beyond 100 h of electrocatalytic operation.

Promoting OH* adsorption by defect engineering of CuO catalysts for selective electro-oxidation of amines to nitriles coupled with hydrogen production

Developing a high-efficiency benzylamine oxidation reaction (BOR) to replace the sluggish oxygen evolution reaction (OER) is an attractive pathway to promote H2 production and concurrently realize organic conversion. However, the electrochemical BOR performance is still far from satisfactory. Herein, we present a self-supported CuO nanorod array with abundant oxygen vacancies on copper foam (Vo-rich CuO/CF) as a promising anode for selective electro-oxidation of benzylamine (BA) to benzonitrile (BN) coupled with cathodic H2 generation. In situ infrared spectroscopy demonstrates the selective conversion of BA into BN on Vo-rich CuO. Furthermore, in situ Raman spectroscopy discloses a direct electro-oxidation mechanism of BA driven by electroactive hydroxyl species (OH*) over the Vo-rich CuO catalyst. Theoretical and experimental studies verify that the presence of oxygen vacancies is more favorable for the adsorption of OH* and BA molecules, enabling accelerated kinetics for the BOR. As expected, the Vo-rich CuO/CF electrode delivers outstanding BOR activity and stability, giving a high faradaic efficiency (FE) of over 93% for BN production at a potential of 0.40 V vs. Ag/AgCl. Impressively, almost 100% FE for H2 production can be further achieved at the NiSe cathode by integrating BA oxidation in a two-electrode electrolyzer.

Metal-organic frameworks (MOFs) for hybrid water electrolysis: structure-property-performance correlation

Hybrid water electrolysis (HWE) is a promising pathway for the simultaneous production of high-value chemicals and clean H2 fuel. Unlike conventional electrochemical water splitting, which relies on the oxygen evolution reaction (OER), HWE involves the anodic oxidation reaction (AOR). The AORs facilitate the conversion of organic or inorganic compounds at the anode into valuable chemicals, while the cathode carries out the hydrogen evolution reaction (HER) to produce H2. Recent literature has witnessed a surge in papers investigating various AORs with organic and inorganic substrates using a series of transition metal-based catalysts. Over the past two decades, metal-organic frameworks (MOFs) have garnered significant attention for their exceptional performance in electrochemical water splitting. These catalysts possess distinct attributes such as highly porous architectures, customizable morphologies, open facets, high electrochemical surface areas, improved electron transport, and accessible catalytic sites. While MOFs have demonstrated efficiency in electrochemical water splitting, their application in hybrid water electrolysis has only recently been explored. In recent years, a series of articles have been published; yet there is no comprehensive article summarizing MOFs for hybrid water electrolysis. This article aims to fill this gap by delving into the recent progress in MOFs specifically tailored for hybrid water electrolysis. In this article, we systematically discuss the structure-property-performance relationships of various MOFs utilized in hybrid water electrolysis, supported by pioneering examples. We explore how the structure, morphology, and electronic properties of MOFs impact their performance in hybrid water electrolysis, with particular emphasis on value-added chemical generation, H2 production, potential improvement, conversion efficiency, selectivity, faradaic efficiency, and their potential for industrial-scale applications. Furthermore, we address future advancements and challenges in this field, providing insights into the prospects and challenges associated with the continued development and deployment of MOFs for hybrid water electrolysis.

Energy-Efficient Co-production of Benzoquinone and H2 Using Waste Phenol in a Hybrid Alkali/Acid Flow Cell

In both the manufacturing and chemical industries, benzoquinone is a crucial chemical product. A perfect and economical method for making benzoquinone is the electrochemical oxidation of phenol, thanks to the traditional thermal catalytic oxidation of phenol process requires high cost, serious pollution and harsh reaction conditions. Here, a unique heterostructure electrocatalyst on nickel foam (NF) consisting of nickel sulfide and nickel oxide (Ni9S8-Ni15O16/NF) was produced, and this catalyst exhibited a low overpotential (1.35 V vs. RHE) and prominent selectivity (99 %) for electrochemical phenol oxidation reaction (EOP). Ni9S8-Ni15O16/NF is beneficial for lowering the reaction energy barrier and boosting reactivity in the EOP process according to density functional theory (DFT) calculations. Additionally, an alkali/acid hybrid flow cell was successfully established by connecting Ni9S8-Ni15O16/NF and commercial RuIr/Ti in series to catalyze phenol oxidation in an alkaline medium and hydrogen evolution in an acid medium, respectively. A cell voltage of only 0.60 V was applied to produce a current density of 10 mA cm-2. Meanwhile, the system continued to operate at 0.90 V for 12 days, showing remarkable long-term stability. The unique configuration of the acid-base hybrid flow cell electrolyzer provides valuable guidance for the efficient and environmentally friendly electrooxidation of phenol to benzoquinone.

Strongly-Interacted NiSe2/NiFe2O4 Architectures Built Through Selective Atomic Migration as Catalysts for the Oxygen Evolution Reaction

The interactions between the catalyst and support are widely used in many important catalytic reactions but the construction of strong interaction with definite microenvironments to understand the structure-activity relationship is still challenging. Here, strongly-interacted composites are prepared via selective exsolution of active NiSe2 from the host matrix of NiFe2O4 (S-NiSe2/NiFe2O4) taking advantage of the differences of migration energy, in which the NiSe2 possessed both high dispersion and small size. The characteristics of spatially resolved scanning transmission X-ray microscopy (STXM) coupled with analytical Mössbauer spectra for the surface and bulk electronic structures unveiled that this strongly interacted composite triggered more charge transfers from the NiSe2 to the host of NiFe2O4 while stabilizing the inherent atomic coordination of NiFe2O4. The obtained S-NiSe2/NiFe2O4 exhibits overpotentials of 290 mV at 10 mA cm-2 for oxygen evolution reaction (OER). This strategy is general and can be extended to other supported catalysts, providing a powerful tool for modulating the catalytic performance of strongly-interacted composites.

Modulation of Electronic Synergy to Enhance the Intrinsic Activity of Fe5Ni4S8 Nanosheets in Restricted Space Carbonized Wood Frameworks for Efficient Oxygen Evolution Reaction

Modulation of electronic structure and composition is widely recognized as an effective strategy to improve electrocatalyst performance. Herein, using a simple simultaneous carbonization and sulfidation strategy, NiFe double hydroxide-derived Fe5Ni4S8 (FNS) nanosheets immobilized on S-doped carbonized wood (SCW) framework by taking benefit of the orientation-constrained cavity and hierarchical porous structure of wood is proposed. Benefiting from the synergistic relationships between bimetal ions, the spatial confinement offered by the wood cavity, and the enhanced structural effects of the nanosheets array, the FNS/SCW exhibit enhanced intrinsic activity, increased accessibility of catalytically active sites, and convection-facilitated mass transport, resulting in an excellent oxygen evolution reaction (OER) activity and durability. Specifically, it takes a low overpotential of 230 mV at 50 mA cm-2 and potential increase is negligible (3.8%) at 50 mA cm-2 for 80 hours. Density functional theory (DFT) calculations further reveal that the synergistic effect of bimetal can optimize the electronic structure and lower the reaction energy barrier. The FNS/SCW used as the cathode of zinc-air battery shows higher power density and excellent durability relative to commercial RuO2, exhibiting a good application prospect. Overall, this research offers proposals for designing and producing effective OER electrocatalysts using sustainable resources.

Reconstructing Hydrogen-Bond Network for Efficient Acidic Oxygen Evolution

Developing highly active oxygen evolution reaction (OER) catalysts in acidic conditions is a pressing demand for proton-exchange membrane water electrolysis. Manipulating proton character at the electrified interface, as the crux of all proton-coupled electrochemical reactions, is highly desirable but elusive. Herein we present a promising protocol, which reconstructs a connected hydrogen-bond network between the catalyst-electrolyte interface by coupling hydrophilic units to boost acidic OER activity. Modelling on N-doped-carbon-layer clothed Mn-doped-Co3O4 (Mn-Co3O4@CN), we unravel that the hydrogen-bond interaction between CN units and H2O molecule not only drags the free water to enrich the surface of Mn-Co3O4 but also serves as a channel to promote the dehydrogenation process. Meanwhile, the modulated local charge of the Co sites from CN units/Mn dopant lowers the OER barrier. Therefore, Mn-Co3O4@CN surpasses RuO2 at high current density (100 mA cm-2 @ ~538 mV).

Electrocatalytic Oxidation of Methanol and Ethanol with 3d-Metal Based Anodic Electrocatalysts in Alkaline Media Using Carbon Based Electrode Assembly

Homogeneous electrocatalytic systems based on readily available, earth-abundant, inexpensive base metals Ni, Co, and Cr have been formulated for the electro-oxidation of alcohols (methanol and ethanol) that constitute a key half-cell component of direct alcohol fuel cells (DAFCs). Notably, excellent results were obtained for both methanol as well as ethanol electro-oxidation while operating with a half-cell assembly based on all-non-noble working and counter electrode systems consisting of glassy carbon and graphite rod, respectively. Using NaOH as the supporting electrolyte, Ni/Co/Cr metal salts and their bis(iminopyridine) complexes have been used as anodic electrocatalysts for the alcohol half-cell reactions, and among them, catalytic systems based on Co outperformed the corresponding systems based on Ni and Cr. The system comprising CoCl2.·6H2O [10 mM] + NaOH [6 M] at room temperature emerged as the best electrocatalyst for both methanol [5 M] electro-oxidation (ca. 522.5 ± 13.5 mA cm-2 at 1.4 V) and ethanol [5 M] electro-oxidation (ca. 209 ± 25 mA cm-2 at 1.34 V). It was observed that regardless of the starting alcohol, the end product is carbon dioxide, all of which gets trapped as sodium carbonate (up to 97% yield), thereby mitigating any possible hazards of greenhouse gas emission. Inferences obtained from FETEM, FESEM, and EDS analysis of both the electrolyte solution and residues deposited on the electrode surface provide evidence for the mostly homogeneous nature of the reaction mixture with the molecular catalyst being the major contributor toward the electrocatalytic activity apart from the minor role played by trace heterogeneous particles. The current cell assembly operating with non-noble working and counter electrodes utilizing a catalytic system based on an earth-abundant, base metal salt/complex that not only results in good half-cell current densities for high-energy power-source DAFCs but also generates high-value sodium carbonate offers an exciting avenue.

Strain and Shell Thickness Engineering in Pd3 Pb@Pt Bifunctional Electrocatalyst for Ethanol Upgrading Coupled with Hydrogen Production

The ethanol oxidation reaction (EOR) is an attractive alternative to the sluggish oxygen evolution reaction in electrochemical hydrogen evolution cells. However, the development of high-performance bifunctional electrocatalysts for both EOR and hydrogen evolution reaction (HER) is a major challenge. Herein, the synthesis of Pd3 Pb@Pt core-shell nanocubes with controlled shell thickness by Pt-seeded epitaxial growth on intermetallic Pd3 Pb cores is reported. The lattice mismatch between the Pd3 Pb core and the Pt shell leads to the expansion of the Pt lattice. The synergistic effects between the tensile strain and the core-shell structures result in excellent electrocatalytic performance of Pd3 Pb@Pt catalysts for both EOR and HER. In particular, Pd3 Pb@Pt with three Pt atomic layers shows a mass activity of 8.60 A mg-1 Pd+Pt for ethanol upgrading to acetic acid and close to 100% of Faradic efficiency for HER. An EOR/HER electrolysis system is assembled using Pd3 Pb@Pt for both the anode and cathode, and it is shown that low cell voltage of 0.75 V is required to reach a current density of 10 mA cm-2 . The present work offers a promising strategy for the development of bifunctional catalysts for hybrid electrocatalytic reactions and beyond.

Recent Advancements in Electrochemical Hydrogen Production via Hybrid Water Splitting

As one of the most promising approaches to producing high-purity hydrogen (H2 ), electrochemical water splitting powered by the renewable energy sources such as solar, wind, and hydroelectric power has attracted considerable interest over the past decade. However, the water electrolysis process is seriously hampered by the sluggish electrode reaction kinetics, especially the four-electron oxygen evolution reaction at the anode side, which induces a high reaction overpotential. Currently, the emerging hybrid electrochemical water splitting strategy is proposed by integrating thermodynamically favorable electro-oxidation reactions with hydrogen evolution reaction at the cathode, providing a new opportunity for energy-efficient H2 production. To achieve highly efficient and cost-effective hybrid water splitting toward large-scale practical H2 production, much work has been continuously done to exploit the alternative anodic oxidation reactions and cutting-edge electrocatalysts. This review will focus on recent developments on electrochemical H2 production coupled with alternative oxidation reactions, including the choice of anodic substrates, the investigation on electrocatalytic materials, and the deep understanding of the underlying reaction mechanisms. Finally, some insights into the scientific challenges now standing in the way of future advancement of the hybrid water electrolysis technique are shared, in the hope of inspiring further innovative efforts in this rapidly growing field.

Iron-optimized oxygen vacancy concentration to strengthen the electrocatalytic ability of the urea oxidation reaction

Iron-modified Ni(OH)2/NiSe2 enhances oxygen vacancies, expanding the electrochemically active surface area, which exhibiting superior selectivity and stability in urea oxidation reaction, outperforming pristine Ni(OH)2@NiSe2. It also demonstrates superior catalytic performance in the oxidation reactions of other small molecules.

Selective electrosynthesis of platform chemicals from the electrocatalytic reforming of biomass-derived hexanediol

6-Hydroxyhexanoic acid and adipic acid are platform chemicals and are widely used as building blocks for the synthesis of important polymers. Nevertheless, the industrial syntheses of these two chemicals are fossil fuel-based and involve the use of corrosive acid and emission of the NOx greenhouse gas. In this study, the electrosynthesis of 6-hydroxyhexanoic acid and adipic acid from the electrochemical oxidation of hexanediol at the nanoporous nickel oxyhydroxide modified electrode was explored as an environmentally-benign alternative to the industrial syntheses of 6-hydroxyhexanoic acid and adipic acid. The effects of electrolysis conditions, including the electrolyte pH and applied potentials, on faradaic efficiency and product distribution of the electrochemical oxidation of hexanediol, were thoroughly examined through a series of controlled-potential electrolyses. In addition, the scale-up electrosynthesis of 6-hydroxyhexanoic acid and adipic acid using a flow-type electrolyzer was also demonstrated.

Boosting nucleophilic attack to realize high current density biomass valorization on a tunable Prussian blue analogue

Electrochemical biomass valorization provides a promising approach to generating value-added chemicals. Herein, we have creatively utilized a Prussian blue analogue as a structure template of the anodic catalyst and improved its catalyst capacity by adjusting its electronic structure. The nickel-based Prussian blue analogue/Ni foam (NiFe-PBA/NF) exhibits excellent performance for methanol (MeOH) oxidation and achieves almost 94.1% FE of formic acid at a high current density of 500 mA cm-2. Apart from formic acid, NiFe-PBA/NF also has good catalytic ability for ethanol, glycerol, glucose, and 5-hydroxymethylfurfural (HMF). In short, this work has developed a promising class of catalysts for biomass valorization.

Ceo2 /Cus Nanoplates Electroreduce Co2 to Ethanol with Stabilized Cu+ Species

Copper-based electrocatalysts effectively produce multicarbon (C2+ ) compounds during the electrochemical CO2 reduction (CO2 RR). However, big challenges still remain because of the chemically unstable active sites. Here, cerium is used as a self-sacrificing agent to stabilize the Cu+ of CuS, due to the facile Ce3+ /Ce4+ redox. CeO2 -modified CuS nanoplates achieve high ethanol selectivity, with FE up to 54% and FEC2+ ≈ 75% in a flow cell. Moreover, in situ Raman spectroscopy and in situ Fourier-transform infrared spectroscopy indicate that the stable Cu+ species promote CC coupling step under CO2 RR. Density functional theory calculations further reveal that the stronger * CO adsorption and lower CC coupling energy, which is conducive to the selective generation of ethanol products. This work provides a facile strategy to convert CO2 into ethanol by retaining Cu+ species.

Lattice-disordered high-entropy metal hydroxide nanosheets as efficient precatalysts for bifunctional electro-oxidation

Electro-oxidation reactions (EORs) are important half reactions in overall and assisted water electrolysis, which are crucial in achieving economic and sustainable hydrogen production and realizing simultaneous wastewater treatment. Current studies indicate that the high-valence metal ions that are locally enriched in the catalysts or generated in situ during the anodic preoxidation process are active species for EORs. Hence, designing (pre)catalysts with enriched local active sites and boosted preoxidation is of great importance. In this work, with a focus on improving the EOR performance toward the oxygen evolution reaction (OER) and the urea oxidation reaction (UOR), we fabricated a lattice-disordered high-entropy FeCuCoNiZn hydroxide nanoarray catalyst that exhibits robust bifunctional OER and UOR behavior. The high-entropy feature could bring in a unique catalytic ensemble effect and remarkably improve the intrinsic OER/UOR activity. The lattice-disordered structure could not only enrich the local high-valence metal ions as active sites but also provide abundant reactive surface sites to accelerate the preoxidation process, thus leading to enriched active sites for the OER and UOR. Benefitting from the structural merits, the lattice-disordered high-entropy catalyst exhibits excellent OER and UOR activity with low overpotential, large current density and enhanced intrinsic activity, and no performance degradation but dramatic 35.3% and 88.7% enhancement in activity can be achieved during the long-term OER and UOR tests, respectively. The robust OER and UOR performance makes the lattice-disordered high-entropy catalyst a promising candidate for overall and urea-assisted water electrolysis from industrial, agricultural and sanitary wastewater.

Coupling Hydrazine Oxidation with Seawater Electrolysis for Energy-Saving Hydrogen Production over Bifunctional CoNC Nanoarray Electrocatalysts

Seawater electrolysis is a promising method to produce H₂ without relying on scarce freshwater resource, but its high energy consumption and inevitable accompany of competitive chlorine oxidation reaction (ClOR) are still great technological challenges. Herein, a metal-organic framework (MOF)-templated pyrolysis strategy to prepare uniform cobalt/nitrogen-codoped carbon nanosheet arrays on carbon cloth (CC@CoNC) as highly-efficient but low-cost bifunctional electrocatalysts for hydrazine-assisted seawater electrolysis is explored. The optimized CoNC nanosheet arrays can be used as an efficient bifunctional electrocatalyst to catalyze hydrazine oxidation reaction and hydrogen evolution reaction, remarkably reducing the energy consumption and nicely overcome the undesired anodic corrosion problems caused by ClOR. Impressively, a hydrazine-assisted water electrolysis system is successfully assembled by using the optimized CC@CoNC as both cathode and anode, which only needs an ultra-low cell voltage of 0.557 V and an electricity consumption of 1.22 kW h per cubic meter of H₂ to achieve 200 mA cm^-2 . Furthermore, the optimized CC@CoNC can also show greatly improved stability in the hydrazine-assisted seawater electrolysis system for H₂ production, which can work steadily for above 40 h at ≈10 mA cm^-2 . This study may offer great opportunities for obtaining hydrogen energy from infinite ocean resource by an eco-friendly method.

Inhibitor and Activator: Dual Role of Subsurface Sulfide Enables Selective and Efficient Electro-Oxidation of Methanol to Formate on CuS@CuO Core-Shell Nanosheet Arrays

Selective electro-oxidation of aliphatic alcohols into value-added carboxylates at lower potentials than that of the oxygen evolution reaction (OER) is an environmentally and economically desirable anode reaction for clean energy storage and conversion technologies. However, it is challenging to achieve both high selectivity and high activity of the catalysts for the electro-oxidation of alcohols, such as the methanol oxidation reaction (MOR). Herein, a monolithic CuS@CuO/copper-foam electrode for the MOR with superior catalytic activity and almost 100% selectivity for formate is reported. In the core-shell CuS@CuO nanosheet arrays, the surface CuO directly catalyzes MOR, while the subsurface sulfide not only serves as an inhibitor to attenuate the oxidative power of the surface CuO to achieve selective oxidation of methanol to formate and prevent over-oxidation of formate to CO₂ but also serves as an activator to form more surface O defects as active sites and enhances the methanol adsorption and charge transfer to achieve superior catalytic activity. CuS@CuO/copper-foam electrodes can be prepared on a large scale by electro-oxidation of copper-foam at ambient conditions and can be readily utilized in clean energy technologies.

Amorphous/crystalline heterostructure of NiFe (oxy)hydroxides for efficient oxygen evolution and urea oxidation

A V-doped amorphous/crystalline heterostructure of NiFe (oxy)hydroxide with nanoflower morphology is developed, which exhibits excellent OER and UOR catalytic activities. V doping changes the local charge density, lowers the reaction barrier, and optimizes the electron arrangement of the NiFe LDH catalyst.

Electrochemical Biomass Upgrading Coupled with Hydrogen Production under Industrial-Level Current Density

As promising hydrogen energy carrier, formic acid (HCOOH) plays an indispensable role in building a complete industry chain of a hydrogen economy. Currently, the biomass upgrading assisted water electrolysis has emerged as an attractive alternative for co-producing green HCOOH and H₂ in a cost-effective manner, yet simultaneously affording high current density and Faradaic efficiency (FE) still remains a big challenge. Here, the ternary NiVRu-layered double hydroxides (LDHs) nanosheet arrays for selective glycerol oxidation and hydrogen evolution catalysis are reported, which yield an industry-level 1 A cm^-2 at voltage of 1.933 V, meanwhile showing considerable HCOOH and H₂ productivities of 12.5 and 17.9 mmol cm^-2  h^-1 , with FEs of almost 80% and 96%, respectively. Experimental and theoretical results reveal that the introduced Ru atoms can tune the local electronic structure of Ni-based LDHs, which not only optimizes hydrogen adsorption kinetics for HER, but also reduces the reaction energy barriers for both the conversion of Ni^II into GOR-active Ni^III and carboncarbon (CC) bond cleavage. In short, this work highlights the potential of large-scale H₂ and HCOOH productions from integrated electrocatalytic system and provides new insights for designing advanced electrocatalyst for low-cost and sustainable energy conversion.

On-Chip Microdevice Unveils Reactant Enrichment Effect Dominated Electrocatalysis Activity in Molecular-Linked Catalysts

Molecular functionalization has been intensely studied and artificially constructed to advance various electrocatalytic processes. While there is a widely approved charge-doping effect, the underlying action for reactant distribution/transport remains long neglected. Here an on-chip microdevice unravels that the proton enrichment effect at prototypical methylene blue (MB)/MoS₂ interfaces rather than charge doping contributes to the hydrogen evolution reaction (HER) activity. Back-gated electrical/electrochemical tests detect quantitatively a strong charge injection from MB to MoS₂ realized over diploid carrier density, but these excess carriers are unqualified for the actual enhanced HER activity (from 32 to 125 mA cm^-2 at -0.29 V). On-chip electrochemical impedance further certifies that the proton enrichment in the vicinity of MoS₂, which is generated by the nucleophilic group of MB, actually dominates the HER activity. This finding uncovers the leading function of molecular-linked catalysts.

Structural Reconstruction of Catalysts in Electroreduction Reaction: Identifying, Understanding, and Manipulating

Electroreduction transformation of small molecules (CO₂ , N₂ , and H₂ O) into chemical feedstocks offers a promising approach to eliminate carbon emissions and harness renewable energy. Most cathodic catalysts often undergo structural transformation under operating electroreduction conditions. These structural reconstructions are reflected in changes in their catalytic activity. In-depth understanding of the change of active sites and influence parameters of reconstruction behaviors is an essential precondition for the design of highly efficient catalysts. Despite the previous achievements, comprehensive insight toward the structural evolution mechanism in cathodic catalysts, compared to anode ones, under reaction conditions is still lacking. Herein, an overview of structural reconstruction for cathodic catalysts in terms of fundamental mechanisms, reconstruction process, advanced characterizations, and influencing parameters is provided. On this basis, the typical strategies for manipulating the structural reconfiguration of catalysts are also explicitly discussed from the catalyst structure and working environment. By delivering the mechanism, strategies, insights, and techniques, this review will provide a comprehensive understanding of the structural reconstruction of cathodic catalysts in electroreduction reactions and future guidelines for their rational development.

Bias-free solar hydrogen production at 19.8 mA cm-2 using perovskite photocathode and lignocellulosic biomass

Solar hydrogen production is one of the ultimate technologies needed to realize a carbon-neutral, sustainable society. However, an energy-intensive water oxidation half-reaction together with the poor performance of conventional inorganic photocatalysts have been big hurdles for practical solar hydrogen production. Here we present a photoelectrochemical cell with a record high photocurrent density of 19.8 mA cm^-2 for hydrogen production by utilizing a high-performance organic-inorganic halide perovskite as a panchromatic absorber and lignocellulosic biomass as an alternative source of electrons working at lower potentials. In addition, value-added chemicals such as vanillin and acetovanillone are produced via the selective depolymerization of lignin in lignocellulosic biomass while cellulose remains close to intact for further utilization. This study paves the way to improve solar hydrogen productivity and simultaneously realize the effective use of lignocellulosic biomass.

Triggering Lattice Oxygen Activation of Single-Atomic Mo Sites Anchored on Ni-Fe Oxyhydroxides Nanoarrays for Electrochemical Water Oxidation

Tuning the reactivity of lattice oxygen is of significance for lowering the energy barriers and accelerating the oxygen evolution reaction (OER). Herein, single-atomic Mo sites are anchored on Ni-Fe oxyhydroxide nanoarrays by a facile metal-organic-framework-derived strategy, exhibiting superior performance toward the OER in alkaline media. In situ electrochemical spectroscopy and isotope-labeling experiments reveal the involvement of lattice oxygen during OER cycles. Combining theoretical and experimental investigations of the electronic configuration, it is comprehensively confirmed that the incorporation of single-atomic Mo sites enables higher oxidation state of the metal and strengthened metal-oxygen hybridization, as well as the formation of oxidized ligand holes above the Fermi level. In a word, the considerable acceleration of water oxidation is achieved via enhancing the reactivity of lattice oxygen and triggering the lattice oxygen activation. This work may provide new insights for designing ideal electrocatalysts via tuning the chemical state and activating the anions ligands.

In Situ Chalcogen Leaching Manipulates Reactant Interface toward Efficient Amine Electrooxidation

Engineering the reaction interface is necessary for advancing various electrocatalytic processes. However, most designed catalysts tend to be ineffective due to the inevitable structural reconstruction. Here we utilize that operando electrocatalysis variations (i.e., chalcogen leaching) manipulate the reactant interface toward amine electrooxidation. Taking chalcogen-doped Ni(OH)₂ as an example, operando techniques uncover that chalcogens leach from the matrix and then adsorb on the surface of NiOOH as chalcogenates during the electrooxidation process. The charged chalcogenates will induce the local electric field that pushes the polar amines through the inner Helmholtz plane to enrich on the catalyst surface. Meanwhile, the polarization effect of chalcogenates and amines boost amino C-N bond activation for dehydrogenation into nitrile C≡N bonds. Under the promotion effect of surface-adsorbed chalcogenate ions, our catalysts display over 99.5% propionitrile selectivity at the low potential of 1.317 V with an ultrahigh current density. This finding highlights the use of operando changes of catalysts to rationally design efficient catalysts and further clarifies the underlying role of chalcogen atoms in the electrooxidation process.

In Situ Halogen-Ion Leaching Regulates Multiple Sites on Tandem Catalysts for Efficient CO2 Electroreduction to C2+ Products

Tandem catalysts can divide the reaction into distinct steps by local multiple sites and thus are attractive to trigger CO₂ RR to C₂₊ products. However, the evolution of catalysts generally exists during CO₂ RR, thus a closer investigation of the reconstitution, interplay, and active origin of dual components in tandem catalysts is warranted. Here, taking AgI-CuO as a conceptual tandem catalyst, we uncovered the interaction of two phases during the electrochemical reconstruction. Multiple operando techniques unraveled that in situ iodine ions leaching from AgI restrained the entire reduction of CuO to acquire stable active Cu⁰ /Cu⁺ species during the CO₂ RR. This way, the residual iodine species of the Ag matrix accelerated CO generation and iodine-induced Cu⁰ /Cu⁺ promotes C-C coupling. This self-adaptive dual-optimization endowed our catalysts with an excellent C₂₊ Faradaic efficiency of 68.9 %. Material operando changes in this work offer a new approach for manipulating active species towards enhancing C₂₊ products.

Active and conductive layer stacked superlattices for highly selective CO2 electroreduction

Metal oxides are archetypal CO2 reduction reaction electrocatalysts, yet inevitable self-reduction will enhance competitive hydrogen evolution and lower the CO2 electroreduction selectivity. Herein, we propose a tangible superlattice model of alternating metal oxides and selenide sublayers in which electrons are rapidly exported through the conductive metal selenide layer to protect the active oxide layer from self-reduction. Taking BiCuSeO superlattices as a proof-of-concept, a comprehensive characterization reveals that the active [Bi2O2]2+ sublayers retain oxidation states rather than their self-reduced Bi metal during CO2 electroreduction because of the rapid electron transfer through the conductive [Cu2Se2]2- sublayer. Theoretical calculations uncover the high activity over [Bi2O2]2+ sublayers due to the overlaps between the Bi p orbitals and O p orbitals in the OCHO* intermediate, thus achieving over 90% formate selectivity in a wide potential range from -0.4 to -1.1 V. This work broadens the studying and improving of the CO2 electroreduction properties of metal oxide systems.

Boosting Nitrogen Reduction Reaction via Electronic Coupling of Atomically Dispersed Bismuth with Titanium Nitride Nanorods

Electrocatalytic nitrogen reduction reaction (NRR) is a promising alternative to the traditional Haber-Bosch process. However, the sluggish kinetics and competitive hydrogen evolution reaction result in poor NH3 yield and low Faradaic efficiency (FE). Herein, single bismuth atoms incorporated hollow titanium nitride nanorods encapsulated in nitrogen-doped carbon layer (NC) supported on carbon cloth (NC/Bi SAs/TiN/CC) is constructed for electrocatalytic NRR. Impressively, as an integrated electrode, it exhibits a superior ammonia yield rate of 76.15 µg mgcat -1 h-1 (9859 µg μmolBi -1 h-1 ) at -0.8 V versus RHE and a high FE of 24.60% at -0.5 V versus RHE in 0.1 m Na2 SO4 solution, which can retain stable performance in 10 h continuous operation, surpassing the overwhelming majority of reported Bi-based NRR catalysts. Coupling various characterizations with theory calculations, it is disclosed that the unique monolithic core-shell configuration with porous structure endows abundant accessible active sites, outstanding charge-transfer property, and good stability, while the cooperation effect of Bi SAs and TiN can simultaneously promote the hydrogenation of N2 into NH3 * on the TiN surface and the desorption of NH3 * to release NH3 on the Bi SA sites. These features result in the significant promotion of NRR performance.

Recent advances in the pre-oxidation process in electrocatalytic urea oxidation reactions

The electrocatalytic urea oxidation reaction (UOR) has attracted substantial research interests over the past few years owing to its critical role in coupled electrochemical systems for energy conversion, for example, coupling with the hydrogen evolution reaction (HER) to realize urea-assisted hydrogen production and assembling direct urea fuel cells (DUFC) by coupling with the oxygen reduction reaction (ORR). The UOR process has been proved to be a two-step process which involves an electrochemical pre-oxidation reaction of the metal sites and a subsequent chemical oxidation of the urea molecules on the as-formed high-valence metal sites. Hence, designing advanced (pre-)catalysts with a boosted pre-oxidation reaction is of great importance in improving the UOR performance and thus accelerating the coupled reactions. In this feature article, we discuss the significant role of the pre-oxidation process during the urea electro-oxidation reaction, and summarize detailed strategies and recent advances in promoting the pre-oxidation reaction, including the modulation of the crystallinity, active phase engineering, defect engineering, elemental incorporation and constructing hierarchical nanostructures. We anticipate that this feature article will offer helpful guidance for the design and optimization of advanced (pre-)catalysts for UOR and related energy conversion applications.

Ultrahigh-Current-Density and Long-Term-Durability Electrocatalysts for Water Splitting

Hydrogen economy is imagined where excess electric energy from renewable sources stored directly by electrochemical water splitting into hydrogen is later used as clean hydrogen fuel. Electrocatalysts with the superhigh current density (1000 mA cm^-2 -level) and long-term durability (over 1000 h), especially at low overpotentials (<300 mV), seem extremely critical for green hydrogen from experiment to industrialization. Along the way, numerous innovative ideas are proposed to design high efficiency electrocatalysts in line with industrial requirements, which also stimulates the understanding of the mass/charge transfer and mechanical stability during the electrochemical process. It is of great necessity to summarize and sort out the accumulating knowledge in time for the development of laboratory to commercial use in this promising field. This review begins with examining the theoretical principles of achieving high-efficiency electrocatalysts with high current densities and excellent durability. Special attention is paid to acquaint efficient strategies to design perfect electrocatalysts including atomic structure regulation for electrical conductivity and reaction energy barrier, array configuration constructing for mass transfer process, and multiscale coupling for high mechanical strength. Finally, the importance and the personal perspective on future opportunities and challenges, is highlighted.

Multiphase PdCu nanoparticles with improved C1 selectivity in ethanol oxidation

PdCu/CNT-300 catalysts with a mixed crystalline phase were successfully prepared. The introduction of Cu elements and the presence of a phase interface in the mixed phase facilitated electron transfer and increased the rate of the EOR.

Platinum Modulates Redox Properties and 5-Hydroxymethylfurfural Adsorption Kinetics of Ni(OH)2 for Biomass Upgrading

Nickel hydroxide (Ni(OH)₂ ) is a promising electrocatalyst for the 5-hydroxymethylfurfural oxidation reaction (HMFOR) and the dehydronated intermediates Ni(OH)O species are proved to be active sites for HMFOR. In this study, Ni(OH)₂ is modified by platinum to adjust the electronic structure and the current density of HMFOR improves 8.2 times at the Pt/Ni(OH)₂ electrode compared with that on Ni(OH)₂ electrode. Operando methods reveal that the introduction of Pt optimized the redox property of Ni(OH)₂ and accelerate the formation of Ni(OH)O during the catalytic process. Theoretical studies demonstrate that the enhanced Ni(OH)O formation kinetics originates from the reduced dehydrogenation energy of Ni(OH)₂ . The product analysis and transition state simulation prove that the Pt also reduces adsorption energy of HMF with optimized adsorption behavior as Pt can act as the adsorption site of HMF. Overall, this work here provides a strategy to design an efficient and universal nickel-based catalyst for HMF electro-oxidation, which can also be extended to other Ni-based catalysts such as Ni(HCO₃ )₂ and NiO.

In Situ Phase Separation into Coupled Interfaces for Promoting CO2 Electroreduction to Formate over a Wide Potential Window

Bimetallic sulfides are expected to realize efficient CO₂ electroreduction into formate over a wide potential window, however, they will undergo in situ structural evolution under the reaction conditions. Therefore, clarifying the structural evolution process, the real active site and the catalytic mechanism is significant. Here, taking Cu₂ SnS₃ as an example, we unveiled that Cu₂ SnS₃ occurred self-adapted phase separation toward forming the stable SnO₂ @CuS and SnO₂ @Cu₂ O heterojunction during the electrochemical process. Calculations illustrated that the strongly coupled interfaces as real active sites driven the electron self-flow from Sn⁴⁺ to Cu⁺ , thereby promoting the delocalized Sn sites to combine HCOO* with H*. Cu₂ SnS₃ nanosheets achieve over 83.4 % formate selectivity in a wide potential range from -0.6 V to -1.1 V. Our findings provide insight into the structural evolution process and performance-enhanced origin of ternary sulfides under the CO₂ electroreduction.

One Nanometer PtIr Nanowires as High-Efficiency Bifunctional Catalysts for Electrosynthesis of Ethanol into High Value-Added Multicarbon Compound Coupled with Hydrogen Production

The electrosynthesis of high-value-added multicarbon compounds coupled with hydrogen production is an efficient way to achieve carbon neutrality; however, the lack of effective bifunctional catalysts in electrosynthesis largely hinders its development. Herein, we report the first example on the highly efficient electrosynthesis of high-value-added 1,1-diethoxyethane (DEE) at the anode and high-purity hydrogen at the cathode using 1 nm PtIr nanowires (NWs) as the bifunctional catalysts. We demonstrate that the cell using 1 nm PtIr nanowires as the bifunctional catalysts can achieve a reported lowest voltage of 0.61 V to reach the current density of 10 mA cm^-2, much lower than those of the Pt NWs (0.85 V) and commercial Pt/C (0.86 V), and also can have the highest Faraday efficiencies of 85% for DEE production and 94.0% for hydrogen evolution in all the reported electrosynthesis catalysts. The in situ infrared spectroscopy study reveals that PtIr NWs can facilitate the activation of O-H and C-H bonds in ethanol, which is important for the formation of acetaldehyde intermediate, and finally DEE. In addition, the cell using PtIr NWs as bifunctional catalysts exhibits excellent stability by showing almost no obvious decrease in the Faraday efficiency of the DEE production.

Simultaneously boosting hydrogen production and ethanol upgrading using a highly-efficient hollow needle-like copper cobalt sulfide as a bifunctional electrocatalyst

Electrocatalytic water splitting used for generating clean and sustainable hydrogen (H₂) can be very promising to address current energy shortage and associated environmental issues. However, this methodology is severely impeded by the tardy oxygen evolution reaction (OER). Hence, designing a preferable kinetics and thermodynamics oxidation reaction that supersede OER is very significant for the energy-saving production of H₂. Herein, hollow needle-like copper cobalt sulfide was constructed on carbon cloth (CuCo₂S₄/CC) as a bifunctional electrocatalyst to accelerate H₂ generation and simultaneously convert ethanol into value-added acetic acid. Thanks to the synergistic effect and unique structure of Cu and Co, CuCo₂S₄/CC displays superior catalytic activity and durability in ethanol oxidation reaction (EOR) with a low potential of 1.38 V vs. RHE (@10 mA cm^-2). Meanwhile, it exhibits excellent hydrogen evolution reaction (HER) performance. The homemade CuCo₂S₄/CC//CuCo₂S₄/CC ethanol-water electrolyser only demands a voltage of 1.59 V to deliver 10 mA cm^-2, 150 mV less than that used for ordinary water splitting. This shows that the ethanol-water electrolyser elaborated here holds encouraging potential in the energy-saving production of H₂ and oxidation of ethanol into value-added acetic acid. This present work may open the way for the rational design of other electrocatalysts for efficient biomass oxidation reaction and relevant H₂ production applications.

Palladium cobalt alloy encapsulated in carbon nanofibers as bifunctional electrocatalyst for high-efficiency overall hydrazine splitting

Electrolytic water splitting is a promising strategy to generate clean hydrogen energy but still restricted by the sluggish kinetics during the anodic oxygen evolution reaction (OER). A highly efficient route to significantlyreduce the cell voltage of electrolytic water splitting is to replace OER with hydrazine oxidation reaction (HzOR) so as to assist hydrogen generation effectively. Here, we report the fabrication of carbon nanofibers (CNFs) embedded with palladium cobalt (PdCo) alloy nanoparticles, via an electrospinning followed by a carbonization treatment. The as-synthesized PdCo-CNFs catalyst displays a superior electrocatalytic activity toward HzOR with a working potential of 258 mV (vs. RHE) to drive a current density of 50 mA cm^-2 in an alkaline solution with 0.2 M hydrazine. Furthermore, the favorable hydrogen evolution reaction (HER) activity of this catalyst enables it highly efficient electrolytic hydrogen production, and the two-electrode system using PdCo-CNFs as both the cathode and anode for overall hydrazine splitting is capable of delivering a cell voltage of 0.440 V to attain 10 mA cm^-2, which is 1.496 V less than that for pure water splitting using the same electrodes and even 0.459 V less than the overall hydrazine splitting device using Pt/C//RuO₂ as electrocatalysts. This work provides a reliable way for the fabrication of promising bifunctional electrocatalysts to promote energy-saving hydrogen production for practical applications.

Single WTe2 Sheet-Based Electrocatalytic Microdevice for Directly Detecting Enhanced Activity of Doped Electronegative Anions

The high electrical conductivity of 1T'-WTe₂ deserves particular attention and may show a high potential for hydrogen evolution reaction (HER) catalysis. However, the actual activity certainly does not match expectations, and the inferior HER activity is actually still ambiguous at the atomic level. Unraveling the underlying HER behaviors of 1T'-WTe₂ will give rise to a new family of HER catalysts. Our structural analysis reveals that the inferior activity could result from insufficient charge density around the Te site and blocked adsorption channel at the W site, which cause too weak hydrogen adsorption. Herein, we fabricated a single WTe₂ sheet-based electrocatalytic microdevice for directly extracting enhanced HER activity of doped electronegative F atoms. The overpotential at -10 mA cm^-2 reduced to 0.27 V after F doping compared to 0.45 V for the original state. In situ electrochemical measurement and electrical tests on a single sheet indicate that doped F can regulate surface charge and hydrogen adsorption behavior. Furthermore, the theory simulation uncovers that the smaller atomic radius of F contributes to an empty coordination environment; meanwhile, strong electronegativity induces hydrogen adsorption. Thus, the ΔG_H^* at W sites around the doped F is as low as 0.18 eV. Synergistically modulating the charge properties and opening steric hindrance provides a new pathway to rationally construct electrocatalysts and beyond.

Synergetic enhancement of surface reactions and charge separation over holey C3N4/TiO2 2D heterojunctions

Efficient charge separation and rapid interfacial reaction kinetics are crucial factors that determine the efficiency of photocatalytic hydrogen evolution. Herein, a fascinating 2D heterojunction photocatalyst with superior photocatalytic hydrogen evolution performance - holey C₃N₄ nanosheets nested with TiO₂ nanocrystals (denoted as HCN/TiO₂) - is designed and fabricated via an in situ exfoliation and conversion strategy. The HCN/TiO₂ is found to exhibit an ultrathin 2D heteroarchitecture with intimate interfacial contact, highly porous structures and ultrasmall TiO₂ nanocrystals, leading to drastically improved charge carrier separation, maximized active sites and the promotion of mass transport for photocatalysis. Consequently, the HCN/TiO₂ delivers an impressive hydrogen production rate of 282.3 μmol h^-1 per 10 mg under AM 1.5 illumination and an apparent quantum efficiency of 13.4% at a wavelength of 420 nm due to the synergetic enhancement of surface reactions and charge separation. The present work provides a promising strategy for developing high-performance 2D heterojunctions for clean energy applications.

Electron cloud migration effect-induced lithiophobicity/lithiophilicity transformation for dendrite-free lithium metal anodes

Enabling stable lithium metal anodes is significant for developing electrochemical energy storage systems with higher energy density. However, safety hazards, infinite volume expansion, and low coulombic efficiency (CE) of lithium metal anodes always hinder their practical application. Herein, a nano-thickness lithiophilic Cu-Ni bimetallic coating was synthesized to prepare dendrite-free lithium metal anodes. The electron cloud migration effect caused by the different electronegativities of Cu and Ni can achieve lithiophobicity/lithiophilicity transformation and thus promote uniform Li deposition/dissolution. By changing the ratio of Cu to Ni, the electron cloud migration can be reasonably adjusted for obtaining dendrite-free lithium anodes. As a result, the as-obtained Cu-Ni bimetallic coating is able to guarantee dendrite-free lithium metal anodes with a stable long cycling time (>1500 hours) and a small voltage hysteresis (∼26 mV). In addition, full cells with LiFePO₄ as a cathode present excellent cycling stability and high coulombic efficiency. This work can open a new avenue for optimizing the lithiophilicity of materials and realizing dendrite-free anodes.

Convenient synthesis of polymetallic metal–organic gels for efficient methanol electro-oxidation

Novel Ni-based AlNiCu-MOG and AB&AlNiCu-MOG composite materials were successfully fabricated, which exhibited superior MOR activities with a current density of 17.1 and 33.24 mA cm⁻², respectively.