All-Dielectric Active Terahertz Photonics Driven by Bound States in the Continuum

Interaction-Induced Multiparticle Bound States in the Continuum

Bound states in the continuum (BICs) are localized modes residing in the radiation continuum. They were first predicted for single-particle states, and became a general feature of many wave systems. In many-body quantum physics, it is still unclear what would be a close analog of BICs, and whether interparticle interaction may induce BICs. Here, we predict a novel type of multiparticle states in the interaction-modulated Bose-Hubbard model that can be associated with the BIC concept. Under periodic boundary conditions, a so-called quasi-BIC appears as a bound pair residing in a standing wave formed by the third particle. Under open boundary conditions, such a hybrid state becomes an eigenstate of the system. We demonstrate that the Thouless pumping of the quasi-BICs can be realized by modulating the onsite interactions in space and time. Surprisingly, while the center of mass of the quasi-BIC is shifted by a unit cell in one cycle, the bound pair moves in the opposite direction with the standing wave.

A wireless W-band 3D-printed temperature sensor based on a three-dimensional photonic crystal operating beyond 1000 ∘C

In addressing sensing in harsh and dynamic environments, there are no available millimeter-wave chipless and wireless sensors capable of continuous operation at extremely high temperatures. Here we present a fully dielectric wireless temperature sensor capable of operating beyond 1000 ∘C. The sensor uses high-Q cavities embedded within a three-dimensional photonic crystal resonating at 83.5 GHz and 85.5 GHz, and a flattened Luneburg lens enhances its readout range. The sensor is additively manufactured using Lithography-based Ceramic Manufacturing in Alumina (Al2O3). Despite the clutter, its frequency-coded response remains detectable from outside the furnace at 50 cm and at temperatures up to 1200 ∘C. It is observed that the resonance frequencies shift with temperature. This shift is linked to a change in the dielectric properties of Al2O3, which are estimated up to 1200 ∘C and show good agreement with literature values. The sensor is thus highly suitable for millimeter-wave applications in dynamic, cluttered, and high-temperature environments.

Engineering of Active and Passive Loss in High-Quality-Factor Vanadium Dioxide-Based BIC Metasurfaces

Active functionalities of metasurfaces are of growing interest in nanophotonics. The main strategy employed to date is spectral resonance tuning affecting predominantly the far-field response. However, this barely influences other essential resonance properties like near-field enhancement, signal modulation, quality factor, and absorbance, which are all vital for numerous applications. Here we introduce an active metasurface approach that combines temperature-tunable losses in vanadium dioxide with far-field coupling tunable symmetry-protected bound states in the continuum. This method enables exceptional precision in independently controlling both radiative and nonradiative losses. Consequently, it allows for the adjustment of both the far-field response and, notably, the near-field characteristics like local field enhancement and absorbance. We experimentally demonstrate continuous tuning from under- through critical- to overcoupling, achieving quality factors of 200 and a relative switching contrast of 78%. Our research marks a significant step toward highly tunable metasurfaces, controlling both near- and far-field properties.

Passive trapping of biomolecules in hotspots with all-dielectric terahertz metamaterials

Electromagnetic metamaterials feature the capability of squeezing photons into hotspot regions of high intensity near-field enhancement for strong light-matter interaction, underpinning the next generation of emerging biosensors. However, randomly dispersed biomolecules around the hotspots lead to weak interactions. Here, we demonstrate an all-silicon dielectric terahertz metamaterial sensor design capable of passively trapping biomoleculars into the resonant cavities confined with powerful electric field. Specifically, multiple controllable high-quality factor resonances driven by bound states in the continuum (BIC) are realized by employing longitudinal symmetry breaking. The dielectric metamaterial sensor with nearly 15.2 experimental figure-of-merit enabling qualitative and quantitative identification of different amino acids by delivering biomolecules to the hotspots for strong light-matter interactions. It is envisioned that the presented strategy will enlighten high-performance meta-sensors design from microwaves to visible frequencies, and serve as a potential platform for microfluidic sensing, biomolecular capture, and sorting devices.

Ultra-high Q-factor and amplitude-tunable Fano resonance in vanadium dioxide-silicon hybrid metamaterials

As the resonance response in magnetic systems usually occurs at low frequencies, previously known as terahertz high Q-factor resonances, are mainly excited by electrical resonances. In this paper, we present a metamaterial based on vanadium dioxide-silicon arrays capable of achieving a Q-factor of up to 165 198; the ultra-high Q-factor Fano resonance excited by the proposed metamaterial is mainly affected by strong magnetic resonance. The analysis of diffractive coupling theory, electric field, magnetic field and current distribution shows that strong magnetic resonance is mainly realized by coupling localized plasmon resonance with the lattice resonance. Due to the conductivity-tunable nature of vanadium dioxide, the proposed metamaterial features an amplitude tunable function with a modulation depth of 98.8%. The spectral response of the analyte demonstrates the capability of the proposed metamaterial for application as a sensor with a maximum sensitivity of 69.52 GHz per RIU and a figure of merit of 15 456. The ultra-high Q-factor performance and amplitude tunability of the proposed structure can be applied to terahertz devices, such as ultrasensitive sensors, filters and optical switches.

Active control of an electromagnetically induced transparency analogue in a coupled dual bound states in the continuum system integrated with graphene

Electronically induced transparency (EIT) is a coherent optical phenomenon that induces interference within atoms, allowing certain specific frequencies of light to pass through atomic media without being absorbed. However, EIT systems face challenges related to narrow transparency windows and precise control of slow light. We propose an interference structure based on a coupled dual bound states in the continuum (BIC) system to emulate the EIT-like effect. By integrating quasi-BIC (bright mode) with BIC (dark mode), our design successfully achieves an EIT-like effect in a narrow bright mode with a full width at half maximum (FWHM) of less than 1 nm. Its notable features are the bright mode's wide tunability achieved through structural parameter adjustment and a significant group delay of up to 14.43 ps. Additionally, integrating graphene into the BIC structure introduced a form of active tunability akin to the EIT-like effect. We numerically calculate the coupling structure, and its intrinsic mechanism is analyzed. Analysis based on coupled-mode theory confirms that this active modulation primarily stems from changes in the BIC structure's loss. Due to its special frequency selectivity and insensitivity to the polarization of the light source, this narrow-band EIT-like structure is particularly suitable for high-precision optical sensing and spectroscopy. The significant group delay of this structure enhances the interaction between light and matter, improving the accuracy and efficiency of optical signal control and data transmission, opening up new avenues for slow light applications and making significant progress in the development of active tunable optical switches and modulators.

Non-generic bound states in the continuum in waveguides with lateral leakage channels

For optical waveguides with a layered background which itself is a slab waveguide, a guided mode is a bound state in the continuum (BIC), if it coexists with slab modes propagating outwards in the lateral direction; i.e., there are lateral leakage channels. It is known that generic BICs in optical waveguides with lateral leakage channels are robust in the sense that they still exist if the waveguide is perturbed arbitrarily. However, the theory is not applicable to non-generic BICs which can be defined precisely. Near a BIC, the waveguide supports resonant and leaky modes with a complex frequency and a complex propagation constant, respectively. In this paper, we develop a perturbation theory to show that the resonant and leaky modes near a non-generic BIC have an ultra-high Q factor and ultra-low leakage loss, respectively. Recently, many authors studied merging-BICs in periodic structures through tuning structural parameters. It has been shown that resonant modes near a merging-BIC have an ultra-high Q factor. However, the existing studies on merging-BICs are concerned with specific examples and specific parameters. Moreover, we analyze an arbitrary structural perturbation given by δF(r) to waveguides supporting a non-generic BIC, where F(r) is the perturbation profile and δ is the amplitude, and show that the perturbed waveguide has two BICs for δ > 0 (or δ < 0) and no BIC for δ < 0 (or δ > 0). This implies that a non-generic BIC can be regarded as a merging-BIC (for almost any perturbation profile F) when δ is considered as a parameter. Our study indicates that non-generic BICs have interesting special properties that are useful in applications.

Ultrasensitive Photothermal Switching with Resonant Silicon Metasurfaces at Visible Bands

Dynamic access to quasi-bound states in the continuum (q-BICs) offers a highly desired platform for silicon-based active nanophotonic applications, while the prevailing tuning approaches by free carrier injections via an all-optical stimulus are yet limited to THz and infrared ranges and are less effective in visible bands. In this work, we present the realization of active manipulations on q-BICs for nanoscale optical switching in the visible by introducing a local index perturbation through a photothermal mechanism. The sharp q-BIC resonance exhibits an ultrasensitive susceptibility to the complex index perturbation, which can be flexibly fulfilled by optical heating of silicon. Consequently, a mild pump intensity of 1 MW/cm2 can yield a modification of the imaginary part of the refractive index of less than 0.05, which effectively suppresses the sharp q-BIC resonances and renders an active modulation depth of reflectance exceeding 80%. Our research might open up an enabling platform for ultrasensitive dynamic nanophotonic devices.

Double-Strip Array-Based Metasurfaces with BICs for Terahertz Thin Membrane Detection

A double-strip array-based metasurface that supports the sharp quasi-bound states in the continuum (quasi-BICs) is demonstrated in terahertz regions. By tuning the structural parameters of metal strips, the conversion of BICs and quasi-BICs is controllable. The simulated results exhibit an achieved maximum Q-factor for quasi-BICs that exceeds 500, corresponding to a bandwidth that is less than 1 GHz. The optical response of quasi-BICs is mainly affected by the properties of substrates. Resonant frequencies decrease linearly with increasing refractive index. The bandwidth of quasi-BICs decreases to 0.9 GHz when n is 2.2. The sharp quasi-BICs are also sensitive to changes in material absorption. Low-loss materials show higher Q-factors. Thus, the selection of a suitable substrate material will be beneficial in achieving resonance with a high Q value. The sensitivity of DSAs for molecules is assessed using a thin membrane layer. The DSAs show high sensitivity, which achieves a frequency shift of 70 GHz when the thickness of the membrane is 10 μm, corresponding to a sensitivity of 87.5 GHz/RIU. This metasurface with sharp quasi-BICs is expected to perform well in THz sensing.

Enhancement of wide-band trace terahertz absorption spectroscopy based on microstructures: a review

Research on the interaction between nanoscale materials and light holds significant scientific significance for the development of fields such as optoelectronic conversion and biosensing. The study of micro- and nano-optics has produced numerous outstanding research achievements by utilizing the dielectric optical coupling mechanism and plasmon effects to enhance the interaction between light and matter. These findings have demonstrated tremendous potential for applications in the field of molecular fingerprint sensing. This review focuses on a retrospective analysis of recent research studies in the enhancement of wide-band trace terahertz absorption spectroscopy. The physical mechanisms of using waveguide structures, dielectric metasurfaces/meta-gratings, and spoof surface plasmon polaritons (SSPs) to improve the interaction between light and trace-amount matters are introduced. The new approaches and methods for enhancing broad-band terahertz absorption spectroscopy of trace samples using microstructure designs are discussed. Additionally, we elucidate the scientific ideas and exploratory achievements in enhancing terahertz fingerprint spectroscopy detection. Finally, we provide an outlook on the research and development direction and potential practical applications of absorption spectroscopy enhancement detection.

Phase Interrogation Sensor Based on All-Dielectric BIC Metasurface

The low performance of sensors based on an all-dielectric metasurface limits their application compared to metallic counterparts. Here, for the first time, an all-dielectric BIC (bound states in the continuum) metasurface is employed for highly sensitive phase interrogation refractive index sensing. The proposed sensor is well analyzed, fabricated, and characterized. Experimentally, a high-performance BIC-based microfluidic sensing chip with a Q factor of 1200 is achieved by introducing symmetry breaking. A refractive index sensor with high figure of merit of 418 RIU-1 is demonstrated, which is beneficial to the phase interrogation. Notably, we measure a record phase interrogation sensitivity of 2.7 × 104 deg/RIU to the refractive index, thus enabling the all-dielectric BIC to rival the refractive index detection capabilities of metal-based sensors such as surface plasmon resonance. This scheme establishes a pivotal role of the all-dielectric metasurface in the field of ultrahigh sensitivity sensors and opens possibilities for trace detection in biochemical analysis and environment monitoring.

Ridge resonators with compact guided mode coupling

Ridge resonators are a recently introduced integrated photonic circuit element based on bound states in the continuum (BICs) which can produce a single, sharp resonance over a broad wavelength range with high extinction ratio. However, to excite these resonators, a broad beam of laterally unbound slab mode is required, resulting in a large device footprint, which is not attractive for integrated photonic circuits. In this contribution, we propose and numerically validate a guided-mode waveguide structure that can be analogue to the BIC-based ridge resonators. Our simulations show that the proposed guided-mode waveguide structure can produce resonances with similar characteristics, yet with a significantly reduced footprint. Furthermore, we investigate the influence of the resonator's dimensions on the bandwidth of the resonance, demonstrating that resonances with Q-factors from low to very high (> 10000) are feasible. We believe that the reduced footprint and ability to design filters systematically make the guided-mode waveguide resonators an attractive photonic circuit component with particular value for foundry fabricated silicon photonic circuits.

High-Q Quasi-Bound States in the Continuum in Terahertz All-Silicon Metasurfaces

Bound states in the continuum (BIC)-based all-silicon metasurfaces have attracted widespread attention in recent years because of their high quality (Q) factors in terahertz (THz) frequencies. Here, we propose and experimentally demonstrate an all-silicon BIC metasurface consisting of an air-hole array on a Si substrate. BICs originated from low-order TE and TM guided mode resonances (GMRs) induced by (1,0) and (1,1) Rayleigh diffraction of metagratings, which were numerically investigated. The results indicate that the GMRs and their Q-factors are easily excited and manipulated by breaking the lattice symmetry through changes in the position or radius of the air-holes, while the resonance frequencies are less sensitive to these changes. The measured Q-factor of the GMRs is as high as 490. The high-Q metasurfaces have potential applications in THz modulators, biosensors, and other photonic devices.

Chiral metasurface zone plate for transmission-reflection focusing of circularly polarized terahertz waves

The properties of traditional Fresnel zone plates have been greatly enhanced by metasurfaces, which allow the control of polarization, orbital angular momentum, or other parameters on the basis of focusing. In this Letter, a new, to the best of our knowledge, method for circularly polarized wave manipulation based on a zone plate is proposed. Chiral meta-atoms and binary geometric phase are used for the simultaneous focusing of reflected and transmitted terahertz waves. The silicon-based dielectric chiral units, which show great performance of spin-selective transmission near 0.54 THz, separate the orthogonal circularly polarized components. A binary Pancharatnam-Berry (P-B) phase gradient is obtained by rotating the unit 90 degrees, then the phase zone plate can be easily designed. The simulation results show that the proposed chiral metasurface zone plate has the function of reflection-transmission separation and focusing for the circularly polarized terahertz waves. In addition, we also demonstrate the possibility of using a 1064-nm continuous infrared laser to adjust the intensity of our devices, based on photo-generated carriers in silicon. The design principle of the chiral metasurface zone plates can be extended to other wavelengths, providing new ideas for the regulation of circularly polarized light.

The bound state in the continuum in flexible terahertz metasurfaces enabled sensitive biosensing

The combination of a flexible device and novel electromagnetic resonances offers new dimensions to manipulate electromagnetic waves and promises new device functionalities. In this study, we experimentally demonstrate a flexible metasurface that can support the bound state in the continuum (BIC) in the terahertz regime. The metasurface consists of toroidal dipole resonant units on top of the flexible polyimide substrate, which can support a terahertz Friedrich-Wintgen BIC resonance, and the resonance characteristics can be tuned by changing the parameters of the coupling unit among two resonant modes. The BIC resonances under different bending conditions are analyzed and compared, showing decent mechanical robustness. The sensing application is demonstrated by combining Fetal Bovine Serum with the flexible BIC metasurface. The measured minimum detectable concentration is 0.007 mg mL-1. Benefiting from the mechanical flexibility and BIC resonance characteristics, our approach can effectively manipulate terahertz waves and have potential applications in the realization of multifunctional and flexible photonic devices.

Terahertz asymmetric metallic hole arrays with polarization-independent quasi-bound states in the continuum for membrane sensing

Resonances with both high-quality factor and polarization-independent characteristics are highly desirable for terahertz (THz) sensing. Here, THz sensors based on asymmetric metallic hole arrays (AMHAs) are experimentally demonstrated. Such sensors consisting of four-hole arrays support polarization-independent quasi-bound states in the continuum (BICs). The induced quasi-BIC presents a quality factor exceeding 2000, which enables enhanced sensing for thin membranes. Results show that the frequency shift is 97.5 GHz for the 25-µm thick polyimide (PI), corresponding to a sensitivity of 147.7 GHz/RIU. The sensing performance strongly relates to the enhanced field originating from sharp quasi-BICs. A maximum field enhancement of 15.88 in contrast to the incident field is achieved. When the PI thickness is large than the decay length of enhanced fields, the interaction strength of field-PI becomes weak, resulting in a saturation effect for the shift of quasi-BICs. The proposed sensor possessing polarization-independent quasi-BICs has great potential for practical sensing applications in real-time chemical and biomolecular.

Precision Tailoring Quasi-BIC Resonance of a-Si:H Metasurfaces

The capability of tailoring the resonance wavelength of metasurfaces is important as it can alleviate the manufacturing precision required to produce the exact structure according to the design of the nanoresonators. Tuning of Fano resonances by applying heat has been theoretically predicted in the case of silicon metasurfaces. Here, we experimentally demonstrate the permanent tailoring of quasi-bound states in the continuum (quasi-BIC) resonance wavelength in an a-Si:H metasurface and quantitatively analyze the modification in the Q-factor with gradual heating. A gradual increment in temperature leads to a spectral shift in the resonance wavelength. With the support of ellipsometry measurements, the spectral shift resulting from the short-duration (ten minutes) heating is identified to be due to refractive index variations in the material rather than a geometric effect or amorphous/polycrystalline phase transition. In the case of quasi-BIC modes in the near-infrared, resonance wavelength could be adjusted from T = 350 °C to T = 550 °C without affecting the Q-factor considerably. Apart from the temperature-induced resonance trimming, large Q-factors can be attained at the highest analyzed temperature (T = 700 °C) in the near-infrared quasi-BIC modes. Resonance tailoring is just one of the possible applications of our results. We expect that our study is also insightful in the design of a-Si:H metasurfaces where large Q-factors are required at high temperatures.

Brillouin zone folding driven bound states in the continuum

Non-radiative bound states in the continuum (BICs) allow construction of resonant cavities with confined electromagnetic energy and high-quality (Q) factors. However, the sharp decay of the Q factor in the momentum space limits their usefulness for device applications. Here we demonstrate an approach to achieve sustainable ultrahigh Q factors by engineering Brillouin zone folding-induced BICs (BZF-BICs). All the guided modes are folded into the light cone through periodic perturbation that leads to the emergence of BZF-BICs possessing ultrahigh Q factors throughout the large, tunable momentum space. Unlike conventional BICs, BZF-BICs show perturbation-dependent dramatic enhancement of the Q factor in the entire momentum space and are robust against structural disorders. Our work provides a unique design path for BZF-BIC-based silicon metasurface cavities with extreme robustness against disorder while sustaining ultrahigh Q factors, offering potential applications in terahertz devices, nonlinear optics, quantum computing, and photonic integrated circuits.

Robust and non-robust bound states in the continuum in rotationally symmetric periodic waveguides

A fiber grating and a one-dimensional (1D) periodic array of spheres are examples of rotationally symmetric periodic (RSP) waveguides. It is well known that bound states in the continuum (BICs) may exist in lossless dielectric RSP waveguides. Any guided mode in an RSP waveguide is characterized by an azimuthal index m, the frequency ω, and Bloch wavenumber β. A BIC is a guided mode, but for the same m, ω and β, cylindrical waves can propagate to or from infinity in the surrounding homogeneous medium. In this paper, we investigate the robustness of nondegenerate BICs in lossless dielectric RSP waveguides. The question is whether a BIC in an RSP waveguide with a reflection symmetry along its axis z, can continue its existence when the waveguide is perturbed by small but arbitrary structural perturbations that preserve the periodicity and the reflection symmetry in z. It is shown that for m = 0 and m ≠ 0, generic BICs with only a single propagating diffraction order are robust and non-robust, respectively, and a non-robust BIC with m ≠ 0 can continue to exist if the perturbation contains one tunable parameter. The theory is established by proving the existence of a BIC in the perturbed structure mathematically, where the perturbation is small but arbitrary, and contains an extra tunable parameter for the case of m ≠ 0. The theory is validated by numerical examples for propagating BICs with m ≠ 0 and β ≠ 0 in fiber gratings and 1D arrays of circular disks.

Active quasi-BIC metasurfaces assisted by epsilon-near-zero materials

Active devices play a critical role in modern electromagnetic and photonics systems. To date, the epsilon (ε)-near-zero (ENZ) is usually integrated with the low Q-factor resonant metasurface to achieve active devices, and enhance the light-matter interaction significantly at the nanoscale. However, the low Q-factor resonance may limit the optical modulation. Less work has been focused on the optical modulation in the low-loss and high Q-factor metasurfaces. Recently, the emerging optical bound states in the continuum (BICs) provides an effective way for achieving high Q-factor resonators. In this work, we numerically demonstrate a tunable quasi-BICs (QBICs) by integrating a silicon metasurface with ENZ ITO thin film. Such a metasurface is composed of five square holes in a unit cell, and hosts multiple BICs by engineering the position of centre hole. We also reveal the nature of these QBICs by performing multipole decomposition and calculating near field distribution. Thanks to the large tunability of ITO's permittivity by external bias and high-Q factor enabled by QBICs, we demonstrate an active control on the resonant peak position and intensity of transmission spectrum by integrating ENZ ITO thin films with QBICs supported by silicon metasurfaces. We find that all QBICs show excellent performance on modulating the optical response of such a hybrid structure. The modulation depth can be up to 14.8 dB. We also investigate how the carrier density of ITO film influence the near-field trapping and far-field scattering, which in turn influence the performance of optical modulation based on this structure. Our results may find promising applications in developing active high-performance optical devices.

Terahertz all-dielectric metasurface sensor based on quasi-bound states in the continuum

We proposed a quasi-bound states in the continuum (QBICs) metasurface to realize sensing in the terahertz band. It consists of silicon split ellipse cylinders with different short-long axes and a quartz substrate. By introducing two asymmetric split ellipse cylinders unit cells, magnetic dipole and electric quadrupole resonances of the proposed structure are investigated by multiple Pole theory. This shows that the continuum bound states are transformed into quasi-BICs by tuning the length of the ellipse long axis, and so a high-quality factor can be obtained. The Q value of the proposed structure is 3205, and the figure of merit is 469.64. It has potential applications in gas, liquid, and biomaterial sensing.

A 6G meta-device for 3D varifocal

The sixth-generation (6G) communication technology is being developed in full swing and is expected to be faster and better than the fifth generation. The precise information transfer directivity and the concentration of signal strength are the key topics of 6G technology. We report the synthetic phase design of rotary doublet Airy beam and triplet Gaussian beam varifocal meta-devices to fully control the terahertz beam's propagation direction and coverage area. The focusing spot can be delivered to arbitrary positions in a two-dimensional plane or a three-dimensional space. The highly concentrated signal can be delivered to a specific position, and the transmission direction can be adjusted freely to enable secure, flexible, and high-directivity 6G communication systems. This technology avoids the high costs associated with extensive use of active components. 6G communication systems, wireless power transfer, zoom imaging, and remote sensing will benefit from large-scale adoption of such a technology.

High-Sensitivity Sensing in All-Dielectric Metasurface Driven by Quasi-Bound States in the Continuum

Quasi-bound states in the continuum (quasi-BIC) in all-dielectric metasurfaces provide a crucial platform for sensing due to its ability to enhance strong matter interactions between light-waves and analytes. In this study, a novel high-sensitivity all-dielectric sensor composed of a periodic array of silicon (Si) plates with square nanoholes in the continuous near-infrared band is theoretically proposed. By adjusting the position of the square nanohole, the symmetry-protected BIC and Friedrich-Wintgen BIC (FW-BIC) can be excited. The torodial dipole (TD) and electric quadruple (EQ) are demonstrated to play a dominating role in the resonant modes by near-field analysis and multipole decomposition. The results show that the sensitivity, the Q-factor, and the corresponding figure of merit (FOM) can simultaneously reach 399 nm/RIU (RIU is refractive index unit), 4959, and 1281, respectively. Compared with other complex nanostructures, the proposed metasurface is more feasible and practical, which may open up an avenue for the development of ultrasensitive sensors.

Experimental implementation for near-field displaying application of bound states in continuum supported by terahertz metasurfaces

Optical bound states in continuum (BICs) are the special lossless electromagnetic resonance modes found in optical transmission media. Optical BICs supported by metasurfaces can bring a series of image-based applications, which can be classified into far-field image-based applications and near-field image-based applications according to imaging distance. The far field image-based applications of optical BICs supported by metasurfaces have been proved theoretically and experimentally. However, the near-field image-based applications are still in the stage of theoretical demonstration, and its practical feasibility is still questioned. In this letter, we have experimentally demonstrated the feasibility of near-field image-based applications of optical BICs. An all-silicon terahertz metasurface that supports near-field displaying based on quasi-BIC is designed. Its unit cell is based on the classic asymmetric elliptical strip structure, and one unit cell of the metasurface corresponds to one display pixel. By observing the electric field distribution of the metasurface in the near-field region, the display of the given image is successfully constructed. The near-field image-based application of BICs may be beneficial for the information encryption, the hidden item detection, matter analysis, etc.

Realizing symmetry-guaranteed pairs of bound states in the continuum in metasurfaces

Bound states in the continuum (BICs) have received significant attention for their ability to enhance light-matter interactions across a wide range of systems, including lasers, sensors, and frequency mixers. However, many applications require degenerate or nearly degenerate high-quality factor (Q) modes, such as spontaneous parametric down conversion, non-linear four-wave mixing, and intra-cavity difference frequency mixing for terahertz generation. Previously, degenerate pairs of bound states in the continuum (BICs) have been created by fine-tuning the structure to engineer the degeneracy, yielding BICs that respond unpredictably to structure imperfections and material variations. Instead, using a group theoretic approach, we present a design paradigm based on six-fold rotational symmetry (C₆) for creating degenerate pairs of symmetry-protected BICs, whose frequency splitting and Q-factors can be independently and predictably controlled, yielding a complete design phase space. Using a combination of resonator and lattice deformations in silicon metasurfaces, we experimentally demonstrate the ability to tune mode spacing from 2 nm to 110 nm while simultaneously controlling Q-factor.

Switchable transmissive and reflective metadevices based on the phase transition of vanadium dioxide

Metasurfaces have made great progress in the past decade in generating various planar optical devices. However, most metasurfaces exhibit their functions in either reflection mode or transmission mode, with the other mode unutilized. In this work, we demonstrate switchable transmissive and reflective metadevices by combining metasurfaces with vanadium dioxide. The composite metasurface can work as a transmissive metadevice, with one function for vanadium dioxide in the insulating phase, and is changed to a reflective metadevice with another function for vanadium dioxide in the metallic phase. By carefully designing the structures, the metasurface can be switched from a transmissive metalens to a reflective vortex generator, or between a transmissive beam steering and a reflective quarter-wave plate through the phase transition of vanadium dioxide. The switchable transmissive and reflective metadevices have potential applications in imaging, communication, and information processing.

Engineering Electromagnetic Field Distribution and Resonance Quality Factor Using Slotted Quasi-BIC Metasurfaces

Dielectric metasurfaces governed by bound states in the continuum (BIC) are actively investigated for achieving high-quality factors and strong electromagnetic field enhancements. Traditional approaches reported for tuning the performance of quasi-BIC metasurfaces include tuning the resonator size, period, and structure symmetry. Here we propose and experimentally demonstrate an alternative approach through engineering slots within a zigzag array of elliptical silicon resonators. Through analytical theory, three-dimensional electromagnetic modeling, and infrared spectroscopy, we systematically investigate the spectral responses and field distributions of the slotted metasurface in the mid-IR. Our results show that by introducing slots, the electric field intensity enhancement near the apex and the quality factor of the quasi-BIC resonance are increased by a factor of 2.1 and 3.3, respectively, in comparison to the metasurface without slots. Furthermore, the slotted metasurface also provides extra regions of electromagnetic enhancement and confinement, which holds enormous potential in particle trapping, sensing, and emission enhancement.

Enhanced bound states in the continuum in a DBR-assisted photonic crystal slab

Bound states in the continuum (BICs) are perfectly confined resonances within the radiation continuum. The novel characteristics of single BICs have been studied in great detail in various wave systems, including electromagnetic waves, acoustic waves, water waves, and elastic waves in solids. In practice, the performance of BICs is limited by the finite size of the structure, while the combination of multiple BICs can further improve the localization of resonances. In this study, we experimentally demonstrate the combination of Fabry-Perot and symmetry-protected BICs at near infrared wavelengths by employing a compound photonic crystal system composed of a photonic crystal slab and a distributed Bragg reflector, resulting in an enhanced high quality factor.

Dynamically tunable bound states in the continuum supported by asymmetric Fabry-Pérot resonance

The dynamic regulation of quasi-bound states in the continuum (quasi-BIC) is a research hotspot, such as incident angle, polarization angle, temperature, a medium refractive index, and medium position regulation. In this paper, a dual-band ultra-high absorber composed of upper asymmetric graphene strips and lower graphene nanoribbons can generate a symmetry-protected quasi-BIC and Fabry-Pérot resonance (FPR) mode. The band structure further demonstrates the symmetry-protected BIC. Research shows that the absorption system can withstand a relatively wide range of incidence and polarization angles. Interestingly, the quasi-BIC and FPR modes can be modulated by the Fermi levels of the graphene1 and graphene2, respectively, realizing a multifunctional switch with high modulation depth (MD > 94%), low insertion loss (IL < 0.23 dB), and large dephasing time (DT > 4.35 ps). This work provides a new approach for the dynamic regulation of quasi-BIC and stimulates the development of multifunctional switches in the absorber.

THz absorbers with an ultrahigh Q-factor empowered by the quasi-bound states in the continuum for sensing application

The exceptional resonances excited by symmetry-protected quasi-bound states in the continuum (QBICs) have provided significant potential in high-sensitive sensing applications. Herein, we have proposed a type of metal-insulator-metal (MIM) absorbers supported by QBIC-induced resonances, and the ideal Q-factors of QBIC-induced resonances can be enhanced up to 10⁵ in the THz regime. The coupled mode theory and the multipole scattering theory are employed to thoroughly interpret the QBIC-induced absorption mechanism. Furthermore, the refractive index sensing capacities of the as-presented absorbers have been investigated, where the maximum values of the sensing sensitivity and figure of merit (FOM) can reach up to 187 GHz per refractive index unit and 286, respectively. Therefore, it is believed that the proposed absorbers enabled by QBIC-induced resonances hold promising potential in a broad range of highly demanding sensing applications.

A review of tunable photonics: Optically active materials and applications from visible to terahertz

The next frontier of photonics is evolving into reconfigurable platforms with tunable functions to realize the ubiquitous application. The dynamic control of optical properties of photonics is highly desirable for a plethora of applications, including optical communication, dynamic display, self-adaptive photonics, and multi-spectral camouflage. Recently, to meet the dynamic response over broad optical bands, optically active materials have been integrated with the diverse photonic platforms, typically in the dimension of micro/nanometer scales. Here, we review recent advances in tunable photonics with controlling optical properties from visible to terahertz (THz) spectral range. We propose guidelines for designing tunable photonics in conjunction with optically active materials, inherent in wavelength characteristics. In particular, we devote our review to their potential uses for five different applications: structural coloration, metasurface for flat optics, photonic memory, thermal radiation, and terahertz plasmonics. Finally, we conclude with an outlook on the challenges and prospects of tunable photonics.

Quasi-Bound States in the Continuum Enabled Strong Terahertz Chiroptical Response in Bilayer Metallic Metasurfaces

Bound state in the continuum (BIC) as a novel non-radiating state of light in the continuum of propagating modes has received great attention in photonics. Recently, chiral BICs have been introduced in the terahertz regime. However, strong chiroptical effects of transmitted waves remain challenging to achieve in metallic terahertz metasurfaces, especially for intrinsic chirality at normal incidences. Here, we propose a chiral quasi-BIC by simultaneously breaking the out-of-plane mirror and in-plane C2 rotation symmetries in a bilayer metallic metasurface, in which spin-selective terahertz transmittance is successfully realized. Benefiting from the symmetry-protected nature of our proposed BIC, precise tuning of structural parameters can lead to anticipated chiroptical performance. As a degree of freedom, the rotation angle of the split ring gaps can fully determine the handedness, linewidth, and working frequency with strong circular dichroism. Besides, the sensing performance shows a surrounding refractive index sensitivity of 200 GHz/RIU, which is similar to those of previous works based on terahertz metasurfaces. Taking advantage exclusively of symmetry-protected BICs to realize transmitted terahertz chiroptical response provides fresh insights into the creation of novel BICs, which enables profound advancements in the surging field of novel terahertz devices.

Gigahertz free-space electro-optic modulators based on Mie resonances

Electro-optic modulators are essential for sensing, metrology and telecommunications. Most target fiber applications. Instead, metasurface-based architectures that modulate free-space light at gigahertz (GHz) speeds can boost flat optics technology by microwave electronics for active optics, diffractive computing or optoelectronic control. Current realizations are bulky or have low modulation efficiencies. Here, we demonstrate a hybrid silicon-organic metasurface platform that leverages Mie resonances for efficient electro-optic modulation at GHz speeds. We exploit quasi bound states in the continuum (BIC) that provide narrow linewidth (Q = 550 at \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\lambda }_{{{{{{{{\rm{res}}}}}}}}}=1594$$\end{document}λres=1594 nm), light confinement to the non-linear material, tunability by design and voltage and GHz-speed electrodes. Key to the achieved modulation of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\frac{{{\Delta }}T}{{T}_{\max }}=67 \%$$\end{document}ΔTTmax=67% are molecules with r₃₃ = 100 pm/V and optical field optimization for low-loss. We demonstrate DC tuning of the resonant frequency of quasi-BIC by \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${{\Delta }}{\lambda }_{{{{{{{{\rm{res}}}}}}}}}=$$\end{document}Δλres= 11 nm, surpassing its linewidth, and modulation up to 5 GHz (f_EO,−3dB = 3 GHz). Guided mode resonances tune by \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${{\Delta }}{\lambda }_{{{{{{{{\rm{res}}}}}}}}}=$$\end{document}Δλres= 20 nm. Our hybrid platform may incorporate free-space nanostructures of any geometry or material, by application of the active layer post-fabrication.

Active photonics in free space is important in computing, imaging and sensing. Here, hybrid silicon-organic nanoscale structures change the intensity of a free-space light beam by applied microwave signals at gigahertz speeds with a high efficiency.

High-Q filtering and dynamic modulation in all-dielectric metasurfaces induced by quasi-BIC

The all-dielectric metasurfaces can significantly reduce the volume of optical components while having low loss and high performance, which has become a research hotspot in recent years. However, due to the complexity of metasurface geometric design, it is challenging to realize dynamic modulation on all-dielectric metasurface optical elements. Here, we propose a high quality factor (high-Q) pass-band filter designed by introducing the quasi-bound states in the continuum (quasi-BIC) into the silicon array phase-gradient metasurfaces. Our simulations show that due to the quasi-BIC effect only a high-Q resonance with the linewidth less than 1 nm and the corresponding Q value of ∼37000 could transmit along the zeroth order direction, which could be used for ultra-narrow linewidth filtering. Furthermore, our simulations present that the near-fields of the waveguide modes supported by the silicon arrays are partially distributed inside the indium tin oxide (ITO) substrate, which makes it possible to dynamically tune the central wavelength of our proposed filter by varying the ITO refractive index.

Topologically tuned terahertz confinement in a nonlinear photonic chip

Compact terahertz (THz) functional devices are greatly sought after for high-speed wireless communication, biochemical sensing, and non-destructive inspection. However, controlled THz generation, along with transport and detection, has remained a challenge especially for chip-scale devices due to low-coupling efficiency and unavoidable absorption losses. Here, based on the topological protection of electromagnetic waves, we demonstrate nonlinear generation and topologically tuned confinement of THz waves in an engineered lithium niobate chip forming a wedge-shaped Su-Schrieffer-Heeger lattice. Experimentally measured band structures provide direct visualization of the THz localization in the momentum space, while robustness of the confined mode against chiral perturbations is also analyzed and compared for both topologically trivial and nontrivial regimes. Such topological control of THz waves may bring about new possibilities in the realization of THz integrated circuits, promising for advanced photonic applications.

Highly-sensitive sensor based on toroidal dipole governed by bound state in the continuum in dielectric non-coaxial core-shell cylinder

The electromagnetic fields distributed on the surface region of the nanostructure is very important to improve the performance of the sensor. Here, we proposed a highly sensitive sensor based on toroidal dipole (TD) governed by bound state in the continuum (BIC) in all-dielectric metasurface consisting of single non-coaxial core-shell cylinder nanostructure array. The excitation of TD resonance in a single nanostructure is still challenging. The designed nanostructure not only supports TD resonance in a single nanostructure but also has very high Q-factor. More importantly, its electric field distributes at the surface of outer cylinder-shell, which is very suitable for biosensing. To evaluate the sensing performance of our proposed structure, we investigated the sensitivity and the figure of merit (FOM) of nanostructure with different structural parameters. Maximum sensitivity and FOM can reach up to 342 nm/RIU and 1295 when the asymmetric parameter d =10 nm. These results are of great significance to the research of TD resonance and the development of ultrasensitive sensor.

Highly efficient nonlinear optical emission from a subwavelength crystalline silicon cuboid mediated by supercavity mode

The low quantum efficiency of silicon (Si) has been a long-standing challenge for scientists. Although improvement of quantum efficiency has been achieved in porous Si or Si quantum dots, highly efficient Si-based light sources prepared by using the current fabrication technooloy of Si chips are still being pursued. Here, we proposed a strategy, which exploits the intrinsic excitation of carriers at high temperatures, to modify the carrier dynamics in Si nanoparticles. We designed a Si/SiO2 cuboid supporting a quasi-bound state in the continuum (quasi-BIC) and demonstrated the injection of dense electron-hole plasma via two-photon-induced absorption by resonantly exciting the quasi-BIC with femtosecond laser pulses. We observed a significant improvement in quantum efficiency by six orders of magnitude to ~13%, which is manifested in the ultra-bright hot electron luminescence emitted from the Si/SiO2 cuboid. We revealed that femtosecond laser light with transverse electric polarization (i.e., the electric field perpendicular to the length of a Si/SiO2 cuboid) is more efficient for generating hot electron luminescence in Si/SiO2 cuboids as compared with that of transverse magnetic polarization (i.e., the magnetic field perpendicular to the length of a Si/SiO2 cuboid). Our findings pave the way for realizing on-chip nanoscale Si light sources for photonic integrated circuits and open a new avenue for manipulating the luminescence properties of semiconductors with indirect bandgaps.

All-Optical Tuning of Fano Resonance for Quasi-BIC and Terahertz Sensing Applications

The bound states in the continuum (BIC) support anomalous resonances in the optical or terahertz band with a theoretically infinite quality factor. Therefore, it has great application prospects in the field of sensors. However, the current regulation of BIC mainly relies on the asymmetry of the material structure, which requires high processing technology. The structure can hardly be effectively adjusted once it is formed. In this work, we propose a new metasurface consisting of an array rectangular hole structure combined with aluminum and photosensitive silicon, which supports quasi-BIC to achieve ultrasensitive sensing in the terahertz range. By introducing photosensitive silicon, the asymmetry of the structure is efficiently controlled by the light field, thus realizing the bidirectional continuous control from quasi-BIC to BIC-like states. Through the optimization of the structure, a class of highly sensitive terahertz sensing based on optical tuning is finally proposed. The narrow-band quasi-BIC resonance is sensitive to medium thickness and refractive index, and compared with pure metal structure, the sensitivity and dynamic range can be increased by 2.60 times and 2.63 times, respectively. Due to the high slope of the Fano lineshape, sensitivity can reach 9.41 GHz/RIU and 0.65 GHz/μm, respectively. Furthermore, this feasible and practical structure provides an ideal platform for highly sensitive sensing.

Sieving nanometer enantiomers using bound states in the continuum from the metasurface

Enantioseparation of chiral molecules is an important aspect of life sciences, chemical syntheses, and physics. Yet, the prevailing chemical techniques are not effective. Recently, a few types of plasmonic apertures have been theoretically proposed to distinguish between chiral molecules that vary based on their handedness under circularly polarized illumination. Both analytic calculations and numerical simulation demonstrated that enantioselective optical sieving could be obtained at the nanoscale using a large chiral optical force based on plasmonic resonance enhanced near-field chiral gradients in the aperture. Nevertheless, scaling this scheme to chiral entities of a few nanometer size (i.e., proteins and DNA) faces formidable challenges owing to the fabrication limit of a deeply sub-nanometer aperture and the intense power levels needed for nanoscale trapping. In contrast, by extending the Friedrich-Wintgen theory of the bound states in the continuum (BIC) to photonics, one may explore another mechanism to obtain enantioselective separation of chiral nanoparticles using all-dielectric nanostructures. Here, we present a metasurface composed of an array of silicon (Si) nanodisks embedded with off-set holes, which supports a sharp high-quality (Q) magnetic dipolar (MD) resonance originating from a distortion of symmetry-protected BIC, so called quasi-BIC. We, for the very first time, show that such a quasi-BIC MD resonance can markedly improve the chiral lateral force on the paired enantiomers with linearly polarized illumination. This quasi-BIC MD resonance can enhance the chirality density gradient with alternating sign at each octant around the Si nanodisk, while exhibiting a small gradient for the electromagnetic (EM) density. This offers a chiral lateral force that is 1 order larger in magnitude compared to the non-chiral lateral forces on sub-2 nm chiral objects with a chirality parameter of ±0.01. Moreover, the quasi-BIC MD resonance can excite four pairs of diverse optical potential wells (-13k B T) that are distributed uniformly along the outer edge of the resonator, enabling a simultaneous separation of four paired enantiomers. Our proposed dielectric metasurface may move forward the techniques of enantioseparation and enantiopurification, taking a novel perspective to advanced all-optical enantiopure synthesis.

Analogue of electromagnetically induced transparency in square slotted silicon metasurfaces supporting bound states in the continuum

In this work, a silicon metasurface designed to support electromagnetically induced transparency (EIT) based on quasi-bound states in the continuum (qBIC) is proposed and theoretically demonstrated in the near-infrared spectrum. The metasurface consists of a periodic array of square slot rings etched in a silicon layer. The interruption of the slot rings by a silicon bridge breaks the symmetry of the structure producing qBIC stemming from symmetry-protected states, as rigorously demonstrated by a group theory analysis. One of the qBIC is found to behave as a resonance-trapped mode in the perturbed metasurface, which obtains very high quality factor values at certain dimensions of the silicon bridge. Thanks to the interaction of the sharp qBIC resonances with a broadband bright background mode, sharp high-transmittance peaks are observed within a low-transmittance spectral window, thus producing a photonic analogue of EIT. Moreover, the resonator possesses a simple bulk geometry with channels that facilitate the use in biosensing. The sensitivity of the resonant qBIC on the refractive index of the surrounding material is calculated in the context of refractometric sensing. The sharp EIT-effect of the proposed metasurface, along with the associated strong energy confinement may find direct use in emerging applications based on strong light-matter interactions, such as non-linear devices, lasing, biological sensors, optical trapping, and optical communications.

Dynamic switching between bound states in the continuum (BIC) and quasi-BIC based on a Dirac semimetal terahertz metasurface

This work presents a Dirac semimetal–metal metasurface for the dynamic switching of terahertz-band BIC to quasi-BIC. The display of clear letters is achieved by arranging the metasurface array and applying different voltages.

Envisioning Quantum Electrodynamic Frameworks Based on Bio-Photonic Cavities

A bio-photonic cavity quantum electrodynamic (C-QED) framework could be imagined as a system in which both the “cavity” and the “atom” participating in the light-matter interaction scenario are bio-inspired. Can a cavity be made of a bio-polymer? If so, how should such a cavity appear and what are the best polymers to fabricate it? Can a bioluminescent material stand the comparison with new-fashion semiconductors? In this review we answer these fundamental questions to pave the way toward an eco-friendly paradigm, in which the ever-increasing demand for more performing quantum photonics technologies meets the ever-increasing yet silent demand of our planet to reduce our environmental footprint.

Unveiling the Symmetry Protection of Bound States in the Continuum with Terahertz Near-Field Imaging

Bound states in the continuum (BICs) represent a new paradigm in photonics due to the full suppression of radiation losses. However, this suppression has also hampered the direct observation of them. By using a double terahertz (THz) near-field technique that allows the local excitation and detection of the THz amplitude, we are able to map for the first time the electromagnetic field amplitude and phase of BICs over extended areas, unveiling the field-symmetry protection that suppresses the far-field radiation. This investigation, done for metasurfaces of dimer scatterers, reveals the in-plane extension and formation of BICs with antisymmetric phases, in agreement with coupled-dipole calculations. By displacing the scatterers, we show experimentally that a mirror symmetry is not a necessary condition for a BIC formation. Only π-rotation symmetry is required, making BICs exceptionally robust to structural changes. This work makes the local field of BICs experimentally accessible, which is crucial for the engineering of cavities with infinite lifetimes.

High-quality-factor dual-band Fano resonances induced by dual bound states in the continuum using a planar nanohole slab

In photonics, it is essential to achieve high-quality (Q)-factor resonances to improve optical devices' performances. Herein, we demonstrate that high-Q-factor dual-band Fano resonances can be achieved by using a planar nanohole slab (PNS) based on the excitation of dual bound states in the continuum (BICs). By shrinking or expanding the tetramerized holes of the superlattice of the PNS, two symmetry-protected BICs can be induced to dual-band Fano resonances and their locations as well as their Q-factors can be flexibly tuned. Physical mechanisms for the dual-band Fano resonances can be interpreted as the resonant couplings between the electric toroidal dipoles or the magnetic toroidal dipoles based on the far-field multiple decompositions and the near-field distributions of the superlattice. The dual-band Fano resonances of the PNS possess polarization-independent feature, and they can be survived even when the geometric parameters of the PNS are significantly altered, making them more suitable for potential applications.

Analogue of Electromagnetically Induced Transparency in an All-Dielectric Double-Layer Metasurface Based on Bound States in the Continuum

Bound states in the continuum (BICs) have attracted much attention due to their infinite Q factor. However, the realization of the analogue of electromagnetically induced transparency (EIT) by near-field coupling with a dark BIC in metasurfaces remains challenging. Here, we propose and numerically demonstrate the realization of a high-quality factor EIT by the coupling of a bright electric dipole resonance and a dark toroidal dipole BIC in an all-dielectric double-layer metasurface. Thanks to the designed unique one-dimensional (D)-two-dimensional (2D) combination of the double-layer metasurface, the sensitivity of the EIT to the relative displacement between the two layer-structures is greatly reduced. Moreover, several designs for widely tunable EIT are proposed and discussed. We believe the proposed double-layer metasurface opens a new avenue for implementing BIC-based EIT with potential applications in filtering, sensing and other photonic devices.

Ridge resonators: impact of excitation beam and resonator losses

Photonic resonators based on bound states in the continuum are attractive for sensing and telecommunication applications, as they have the potential to achieve ultra-high Q-factor resonators in a compact footprint. Recently, ridge resonators - leaky mode resonators based on a bound state in the continuum - have been demonstrated on a scalable photonic integrated circuit platform. However, high Q-factor ridge resonators have thus far not been achieved. In this contribution, we investigate the influence of excitation beam width and optical losses on the spectral response of ridge resonators. We show that for practical applications, the space required of the excitation beam is the limiting factor on the highest achievable Q-factor.

Correlating solvation with conformational pathways of proteins in alcohol-water mixtures: a THz spectroscopic insight

Water, being an active participant in most of the biophysical processes, is important to trace how protein solvation changes as its conformation evolves in the presence of solutes or co-solvents. In this study, we investigate how the secondary structures of two diverse proteins - lysozyme and β-lactoglobulin - change in the aqueous mixtures of two alcohols - ethanol and 2,2,2-trifluoroethanol (TFE) using circular dichroism measurements. We observe that these alcohols change the secondary structures of these proteins and the changes are protein-specific. Subsequently, we measure the collective solvation dynamics of these two proteins both in the absence and in the presence of alcohols by measuring the frequency-dependent absorption coefficient (α(ν)) in the THz (0.1-1.2 THz) frequency domain. The alcohol-water mixtures exhibit a non-ideal behaviour with the highest absorption difference (Δα) obtained at X_alcohol = 0.2. The protein solvation in the presence of the alcohols shows an oscillating behaviour in which Δα_protein changes with X_alcohol. Such an oscillatory behaviour of protein solvation results from a delicate interplay between the protein-water, protein-alcohol and water-alcohol associations. We attempt to correlate the various structural conformations of the proteins with the associated solvation.

Analogue of electromagnetically induced transparency in a metal-dielectric bilayer terahertz metamaterial

We realize and numerically demonstrate the analogue of electromagnetically induced transparency (EIT) with a high-Q factor in a metal-dielectric bilayer terahertz metamaterial (MM) via bright-bright mode coupling and bright-dark mode coupling. The dielectric MM with silicon dimer rectangular-ring-resonator (Si-DRR) supports either a bright high-Q toroidal dipole resonance (TD) or a dark TD with infinite Q value, while plasmonic MM with metallic rectangular-ring-resonator (M-RR) supports a low-Q electric dipole resonance (ED). The results show that the near-field coupling between the dark TD and bright ED behaves just as that between the two bright modes, which is dependent on the Q factor of the TD resonance. Further, due to the greatly enhanced near-field coupling between the bright ED and dark TD, the coupling distance is significantly extended to about 1.9 times of the wavelength (in media), and robust EIT with large peak value over 0.9 and high Q-factor is achieved. The proposed bilayer MM provides a new EIT platform for design and applications in high-Q cavities, sensing, and slow-light based devices.

Active Control of Nanodielectric-Induced THz Quasi-BIC in Flexible Metasurfaces: A Platform for Modulation and Sensing

A bound state in the continuum (BIC) is a nonradiating state of light embedded in the continuum of propagating modes providing drastic enhancement of the electromagnetic field and its localization at micro-nanoscale. However, access to such modes in the far-field requires symmetry breaking. Here, it is demonstrated that a nanometric dielectric or semiconductor layer, 1000 times thinner than the resonant wavelength (λ/1000), induces a dynamically controllable quasi-bound state in the continuum (QBIC) with ultrahigh quality factor in a symmetric metallic metasurface at terahertz frequencies. Photoexcitation of nanostrips of germanium activates ultrafast switching of a QBIC resonance with 200% transmission intensity modulation and complete recovery within 7 ps on a low-loss flexible substrate. The nanostrips also form microchannels that provide an opportunity for BIC-based refractive index sensing. An optimization model is presented for (switchable) QBIC resonances of metamaterial arrays of planar symmetric resonators modified with any (active) dielectric for inverse metamaterial design that can serve as an enabling platform for active micro-nanophotonic devices.

High Q-Factor Hybrid Metamaterial Waveguide Multi-Fano Resonance Sensor in the Visible Wavelength Range

We propose a high quality-factor (Q-factor) multi-Fano resonance hybrid metamaterial waveguide (HMW) sensor. By ingeniously designing a metal/dielectric hybrid waveguide structure, we can effectively tailor multi-Fano resonance peaks' reflectance spectrum appearing in the visible wavelength range. In order to balance the high Q-factor and the best Fano resonance modulation depth, numerical calculation results demonstrated that the ultra-narrow linewidth resolution, the single-side quality factor, and Figure of Merit (FOM) can reach 1.7 nm, 690, and 236, respectively. Compared with the reported high Q-value (483) in the near-infrared band, an increase of 30% is achieved. Our proposed design may extend the application of Fano resonance in HMW from mid-infrared, terahertz band to visible band and have important research value in the fields of multi-wavelength non-labeled biosensing and slow light devices.