Silicene: Wet-Chemical Exfoliation Synthesis and Biodegradable Tumor Nanomedicine

Goldene: An Anisotropic Metallic Monolayer with Remarkable Stability and Rigidity and Low Lattice Thermal Conductivity

In a recent breakthrough in the field of two-dimensional (2D) nanomaterials, the first synthesis of a single-atom-thick gold lattice of goldene has been reported through an innovative wet chemical removal of Ti3C2 from the layered Ti3AuC2. Inspired by this advancement, in this communication and for the first time, a comprehensive first-principles investigation using a combination of density functional theory (DFT) and machine learning interatomic potential (MLIP) calculations has been conducted to delve into the stability, electronic, mechanical and thermal properties of the single-layer and free-standing goldene. The presented results confirm thermal stability at 700 K as well as remarkable dynamical stability of the stress-free and strained goldene monolayer. At the ground state, the elastic modulus and tensile strength of the goldene monolayer are predicted to be over 226 and 12 GPa, respectively. Through validated MLIP-based molecular dynamics calculations, it is found that at room temperature, the goldene nanosheet can exhibit anisotropic tensile strength over 9 GPa and a low lattice thermal conductivity around 10 ± 2 W/(m.K), respectively. We finally show that the native metallic nature of the goldene monolayer stays intact under large tensile strains. The combined insights from DFT and MLIP-based results provide a comprehensive understanding of the stability, mechanical, thermal and electronic properties of goldene nanosheets.

Wet-Chemical Synthesis of Elemental 2D Materials

Wet-chemical synthesis refers to the bottom-up chemical synthesis in solution, which is among the most popular synthetic approaches towards functional two-dimensional (2D) materials. It offers several advantages, including cost-effectiveness, high yields,, precious control over the production process. As an emerging family of 2D materials, elemental 2D materials (Xenes) have shown great potential in various applications such as electronics, catalysts, biochemistry,, sensing technologies due to their exceptional/exotic properties such as large surface area, tunable band gap,, high carrier mobility. In this review, we provide a comprehensive overview of the current state-of-the-art in wet-chemical synthesis of Xenes including tellurene, bismuthene, antimonene, phosphorene,, arsenene. The current solvent compositions, process parameters utilized in wet-chemical synthesis, their effects on the thickness, stability of the resulting Xenes are also presented. Key factors considered involves ligands, precursors, surfactants, reaction time, temperature. Finally, we highlight recent advances, existing challenges in the current application of wet-chemical synthesis for Xenes production, provide perspectives on future improvement.

Recent Advances in Two-Dimensional Nanomaterials for Healthcare Monitoring

The development of advanced technologies for the fabrication of functional nanomaterials, nanostructures, and devices has facilitated the development of biosensors for analyses. Two-dimensional (2D) nanomaterials, with unique hierarchical structures, a high surface area, and the ability to be functionalized for target detection at the surface, exhibit high potential for biosensing applications. The electronic properties, mechanical flexibility, and optical, electrochemical, and physical properties of 2D nanomaterials can be easily modulated, enabling the construction of biosensing platforms for the detection of various analytes with targeted recognition, sensitivity, and selectivity. This review provides an overview of the recent advances in 2D nanomaterials and nanostructures used for biosensor and wearable-sensor development for healthcare and health-monitoring applications. Finally, the advantages of 2D-nanomaterial-based devices and several challenges in their optimal operation have been discussed to facilitate the development of smart high-performance biosensors in the future.

Symmetry Evolution Induced 2D Pt Single Atom Catalyst with High Density for Alkaline Hydrogen Oxidation

The performance of single-atom catalysts is greatly influenced by the chemical environment surrounding the central atom. Here, a salt-assisted method is employed to transform the tetrahedral coordination structure of zeolitic imidazolate frameworks - 8 (ZIF-8) into a planar square coordination structure without altering the ligands. During the subsequent carbonization process, concurrent with the evaporation of zinc atoms, the structure of the nitrogen and carbon carriers (NC carriers) undergoes a transition from five-membered rings to six-membered rings to preserve the 2D structure. This transition results in the generation of additional defect sites on the 2D-NC substrates. Hence, the Pt single-atom catalysts with planar square coordination symmetries can be precisely prepared via electrodeposition (denoted as 2D-Pt SAC). The Pt loading of 2D-Pt SAC is 0.49 ± 0.03 µg cm-2, higher than that of 3D-Pt SAC (0.37 ± 0.04 µg cm-2). In the context of the hydrogen oxidation reaction electrocatalysis, under an overpotential of 50 mV, these single-atom catalysts with 2D coordination exhibit mass activities of 2396 A gPt -1 (32 times higher than commercial Pt/C catalyst, 2 times higher than 3D-PtNC).

Novel silicene-mesoporous silica nanoparticles conjugated gemcitabine induced cellular apoptosis via upregulating NF-κB p65 nuclear translocation suppresses pancreatic cancer growthin vitroandin vivo

Pancreatic cancer's high fatality rates stem from its resistance to systemic drug delivery and aggressive metastasis, limiting the efficacy of conventional treatments. In this study, two-dimensional ultrathin silicene nanosheets were initially synthesized and near-infrared-responsive two-dimensional silicene-mesoporous silica nanoparticles (SMSNs) were successfully constructed to load the clinically-approved conventional pancreatic cancer chemotherapeutic drug gemcitabine. Experiments on nanoparticle characterization show that they have excellent photothermal conversion ability and stability. Then silicene-mesoporous silica nanoparticles loaded with gemcitabine nanoparticles (SMSN@G NPs) were employed in localized photothermal therapy to control pancreatic tumor growth and achieve therapeutic effects. Our research confirmed the functionality of SMSN@G NPs through immunoblotting and apoptotic assays, demonstrating its capacity to enhance the nuclear translocation of the NF-κB p65, further affect the protein levels of apoptosis-related genes, induce the apoptosis of tumor cells, and ultimately inhibit the growth of the tumor. Additionally, the study assessed the inhibitory role of SMSN@G NPs on pancreatic neoplasm growthin vivo, revealing its excellent biocompatibility. SMSN@G NPs have a nice application prospect for anti-pancreatic tumors.

Engineering Copper-Containing Nanoparticles-Loaded Silicene Nanosheets with Triple Enzyme Mimicry Activities and Photothermal Effect for Promoting Bacteria-Infected Wound Healing

Skin wounds accompanied by bacterial infections threaten human health, and conventional antibiotic treatments are ineffective for drug-resistant bacterial infections and chronically infected wounds. The development of non-antibiotic-dependent therapeutics is highly desired but remains a challenging issue. Recently, 2D silicene nanosheets with considerable biocompatibility, biodegradability, and photothermal-conversion performance have received increasing attention in biomedical fields. Herein, copper-containing nanoparticles-loaded silicene (Cu2.8O@silicene-BSA) nanosheets with triple enzyme mimicry catalytic (peroxidase, catalase, and oxidase-like) activities and photothermal function are rationally designed and fabricated for efficient bacterial elimination, angiogenesis promotion, and accelerated wound healing. Cu2.8O@silicene-BSA nanosheets display excellent antibacterial activity through synergistic effects of reactive oxygen species generated from multiple catalytic reactions, intrinsic bactericidal activity of released Cu2+ ions, and photothermal effects, achieving high antibacterial efficiencies on methicillin-resistant Staphylococcus aureus (MRSA) of 99.1 ± 0.7% in vitro and 97.2 ± 1.6% in vivo. In addition, Cu2.8O@silicene-BSA nanosheets exhibit high biocompatibility for promoting human umbilical vein endothelial cell (HUVEC) proliferation and angiogenic differentiation. In vivo experiments reveal that Cu2.8O@silicene-BSA nanosheets with synergistic photothermal/chemodynamic therapeutics effectively accelerate MRSA-infected wound healing by eliminating bacteria, alleviating inflammation, boosting collagen deposition, and promoting angiogenesis. This research presents a promising strategy to engineer photothermal-assisted nanozyme catalysis for bacteria-invaded wound healing.

Two-dimensional nanomaterials induced nano-bio interfacial effects and biomedical applications in cancer treatment

Two-dimensional nanomaterials (2D NMs), characterized by a large number of atoms or molecules arranged in one dimension (typically thickness) while having tiny dimensions in the other two dimensions, have emerged as a pivotal class of materials with unique properties. Their flat and sheet-like structure imparts distinctive physical, chemical, and electronic attributes, which offers several advantages in biomedical applications, including enhanced surface area for efficient drug loading, surface-exposed atoms allowing precise chemical modifications, and the ability to form hierarchical multilayer structures for synergistic functionality. Exploring their nano-bio interfacial interactions with biological components holds significant importance in comprehensively and systematically guiding safe applications. However, the current lack of in-depth analysis and comprehensive understanding of interfacial effects on cancer treatment motivates our ongoing efforts in this field. This study provides a comprehensive survey of recent advances in utilizing 2D NMs for cancer treatment. It offers insights into the structural characteristics, synthesis methods, and surface modifications of diverse 2D NMs. The investigation further delves into the formation of nano-bio interfaces during their in vivo utilization. Notably, the study discusses a wide array of biomedical applications in cancer treatment. With their potential to revolutionize therapeutic strategies and outcomes, 2D NMs are poised at the forefront of cancer treatment, holding the promise of transformative advancements.

Silicon-containing nanomedicine and biomaterials: materials chemistry, multi-dimensional design, and biomedical application

The invention of silica-based bioactive glass in the late 1960s has sparked significant interest in exploring a wide range of silicon-containing biomaterials from the macroscale to the nanoscale. Over the past few decades, these biomaterials have been extensively explored for their potential in diverse biomedical applications, considering their remarkable bioactivity, excellent biocompatibility, facile surface functionalization, controllable synthesis, etc. However, to expedite the clinical translation and the unexpected utilization of silicon-composed nanomedicine and biomaterials, it is highly desirable to achieve a thorough comprehension of their characteristics and biological effects from an overall perspective. In this review, we provide a comprehensive discussion on the state-of-the-art progress of silicon-composed biomaterials, including their classification, characteristics, fabrication methods, and versatile biomedical applications. Additionally, we highlight the multi-dimensional design of both pure and hybrid silicon-composed nanomedicine and biomaterials and their intrinsic biological effects and interactions with biological systems. Their extensive biomedical applications span from drug delivery and bioimaging to therapeutic interventions and regenerative medicine, showcasing the significance of their rational design and fabrication to meet specific requirements and optimize their theranostic performance. Additionally, we offer insights into the future prospects and potential challenges regarding silicon-composed nanomedicine and biomaterials. By shedding light on these exciting research advances, we aspire to foster further progress in the biomedical field and drive the development of innovative silicon-composed nanomedicine and biomaterials with transformative applications in biomedicine.

Gene and Photothermal Combination Therapy: Principle, Materials, and Amplified Anticancer Intervention

Gene therapy (GT) and photothermal therapy (PTT) have emerged as promising alternatives to chemotherapy and radiotherapy for cancer treatment, offering noninvasiveness and reduced side effects. However, their efficacy as standalone treatments is limited. GT exhibits slow response rates, while PTT is confined to local tumor ablation. The convergence of GT and PTT, known as GT-PTT, facilitated by photothermal gene nanocarriers, has attracted considerable attention across various disciplines. In this integrated approach, GT reciprocates PTT by sensitizing cellular response to heat, while PTT benefits GT by improving gene translocation, unpacking, and expression. Consequently, this integration presents a unique opportunity for cancer therapy with rapid response and improved effectiveness. Extensive efforts over the past few years have been dedicated to the development of GT-PTT, resulting in notable achievements and rapid progress from the laboratory to potential clinical applications. This comprehensive review outlines recent advances in GT-PTT, including synergistic mechanisms, material systems, imaging-guided therapy, and anticancer applications. It also explores the challenges and future prospects in this nascent field. By presenting innovative ideas and insights into the implementation of GT-PTT for enhanced cancer therapy, this review aims to inspire further progress in this promising area of research.

MXene and Xene: promising frontier beyond graphene in tissue engineering and regenerative medicine

The emergence of 2D nanomaterials (2D NMs), which was initiated by the isolation of graphene (G) in 2004, revolutionized various biomedical applications, including bioimaging and -sensing, drug delivery, and tissue engineering, owing to their unique physicochemical and biological properties. Building on the success of G, a novel class of monoelemental 2D NMs, known as Xenes, has recently emerged, offering distinct advantages in the fields of tissue engineering and regenerative medicine. In this review, we focus on the comparison of G and Xene materials for use in fabricating tissue engineering scaffolds. After a brief introduction to the basic physicochemical properties of these materials, recent representative studies are classified in terms of the engineered tissue, i.e., bone, cartilage, neural, muscle, and skin tissues. We analyze several methods of improving the clinical potential of Xene-laden scaffolds using state-of-the-art fabrication technologies and innovative biomaterials. Despite the considerable advantages of Xene materials, critical concerns, such as biocompatibility, biodistribution and regulatory challenges, should be considered. This review and collaborative efforts should advance the field of Xene-based tissue engineering and enable innovative, effective solutions for use in future tissue regeneration.

IOX1 epigenetically enhanced photothermal therapy of 3D-printing silicene scaffolds against osteosarcoma with favorable bone regeneration

Osteosarcoma (OS) is the third most common malignancy in adolescence. Currently, the treatments of OS confront great obstacles of tumor recurrence and critical bone defects after surgery, severely affecting the survival rates and living qualities of patients. Hence, it is urged to develop distinct biomaterials with both efficient tumor therapeutic and osteogenic functions. Although photothermal therapy (PTT) has aroused expanding interest, characterizing negligible invasiveness and high spatiotemporal adjustment, few studies discussed its drawbacks, such as thermal injury to adjacent normal tissue and exceeded laser power density, implying that focusing on sensitizing OS to PTT instead of simply elevating the laser power density may be a fresh way to enhance the PTT efficacy and attenuate the side/adverse effects. Herein, we successfully constructed 3D-printing silicene bioactive glass scaffolds with preferable PTT efficacy at the second near-infrared (NIR-II) biowindow and outstanding osteogenic biofunctions owing to the release of bioactive elements during degradation. Impressively, a histone demethylase inhibitor, IOX1, was introduced before PTT to sensitize OS to thermal therapy and minimize the side/adverse effects. This work offered a distinctive paradigm for optimizing the PTT efficacy of osteogenic scaffolds against OS with epigenetic modulation agents.

Hydrogenated silicene nanosheet functionalized scaffold enables immuno-bone remodeling

An ideal implant needs to have the ability to coordinate the foreign body response and tissue regeneration. Here, Hydrogenated-silicon nanosheets (H-Si NSs) with favorable biodegradability are integrated and functionalized into a β-tricalcium phosphate scaffold (H-Si TCP) for bone defect healing. H-Si TCP can greatly improve bone regeneration through osteoimmunomodulation-guided biodegradation in vivo. The spatiotemporal regulation of degradation products replenishes sufficient nutrients step by step for the entire process of bone repair. Extracellular and intracellular reactive oxygen species (ROS) are first downregulated by reaction with H-Si NSs, followed by marked M2 polarization, remodeling the micro-environment timely for immune-bone regeneration. The release of primary reaction products awakened bone marrow mesenchymal stem cells (BMSCs), which are converted into osteoblasts anchored on scaffolds. Subsequently, biomineralization is promoted by the final degradation products. The intrinsic ROS-responsive, immunoregulatory, and osteo-promotive capability of 2D H-Si NSs makes such composite H-Si TCP scaffold a highly potential alternative for the treatment of critical bone defect.

Ultrasmall Cortex Moutan Nanoclusters for the Therapy of Pneumonia and Colitis

Infectious pneumonia and colitis are hard to be treated due to tissue infection, mucosal immune disorders, and dysbacteriosis. Although conventional nanomaterials can eliminate infection, they also damage normal tissues and intestinal flora. Herein, this work reports bactericidal nanoclusters formed through self-assembly for efficient treatment of infectious pneumonia and enteritis. The ultrasmall (about 2.3 nm) cortex moutan nanoclusters (CMNCs) has excellent antibacterial, antiviral, and immune regulation activity. The formation of nanoclusters is analyzed from the molecular dynamics mainly through the binding between polyphenol structures through hydrogen bonding and ππ stacking interaction. CMNCs have enhanced tissue and mucus permeability ability compared with natural CM. CMNCs precisely targeted bacteria due to polyphenol-rich surface structure and inhibited broad spectrum of bacteria. Besides, they killed H1N1 virus mainly through the inhibition of the neuraminidase. These CMNCs are effective in treating infectious pneumonia and enteritis relative to natural CM. In addition, they can be used for adjuvant colitis treatment by protecting colonic epithelium and altering the composition of gut microbiota. Therefore, CMNCs showed excellent application and clinical translation prospects in the treatment of immune and infectious diseases.

Thermodynamic 2D Silicene for Sequential and Multistage Bone Regeneration

Bone healing is a multistage process involving the recruitment of cells, revascularization, and osteogenic differentiation, all of which are modulated in the temporal sequence to maximize cascade bone regeneration. However, insufficient osteoblast cells, poor blood supply, and limited bone induction at the site of critical‐sized bone defect broadly impede bone repair. 2D SiO2‐silicene@2,2′‐,azobis(2‐[2‐imidazolin‐2‐yl] propane) (SNSs@AIPH) with inherent thermodynamic property and osteoinductive activity is therefore designed and engineered for sequentially efficient bone repair. By means of controllable NIR‐II irradiation, the integrated SNSs@AIPH stimulates the generation of appropriate intracellular reactive oxygen species, which accelerates early bone marrow mesenchymal stem cells (BMSCs) proliferation and angiogenesis remarkably. Importantly, as silicon‐based 2D nanoparticles, the engineered SNSs@AIPH with high biocompatibility features distinct bioactivity to significantly promote BMSCs osteogenesis differentiation by activating TGFβ and BMP pathways. In a rat cranial defect model, SNSs@AIPH‐NIR‐II leads to a comparable increase of BMSCs proliferation and local vascularization at an early stage, followed by significant osteogenic differentiation, synergically resulting in a highly effective bone repair. Collectively, the fascinating characteristics and exceptional bone repair efficiency of NIR‐II‐mediated SNSs@AIPH allow it to be a promising bionic‐oriented strategy for bone regeneration, broadening a new perspective in the application of cell‐instructive biomaterials in bone tissue engineering.

Recent progress in emergent two-dimensional silicene

Although graphene is by far the most famous example of two-dimensional (2D) materials, which exhibits a wealth of exotic and intriguing properties, it suffers from a severe drawback. In this regard, the exploration of silicene, the silicon analog of the graphene material, has attracted substantial interest in the past decade. This review therefore provides a comprehensive survey of recent theoretical and experimental works on this 2D material. We first overview the distinctive structures and properties of silicene, including mechanical, electronic, and spintronic properties. We then discuss the growth and experimental characterization of silicene on Ag(111) and other different substrates, providing insights into the different phases or atomic arrangements of silicene observed on the metallic surfaces as well as on its electronic structures. Then, the recent state-of-the-art applications of silicene are summarized in section 4 with the aim to break the scientific and engineering barriers for application in nanoelectronics, sensors, energy storage devices, electrode materials, and quantum technology. Finally, the concluding remarks and the future prospects of silicene are also provided.

Computational Biomaterials: Computational Simulations for Biomedicine

With the flourishing development of material simulation methods (quantum chemistry methods, molecular dynamics, Monte Carlo, phase field, etc.), extensive adoption of computing technologies (high-throughput, artificial intelligence, machine learning, etc.), and the invention of high-performance computing equipment, computational simulation tools have sparked the fundamental mechanism-level explorations to predict the diverse physicochemical properties and biological effects of biomaterials and investigate their enormous application potential for disease prevention, diagnostics, and therapeutics. Herein, the term "computational biomaterials" is proposed and the computational methods currently used to explore the inherent properties of biomaterials, such as optical, magnetic, electronic, and acoustic properties, and the elucidation of corresponding biological behaviors/effects in the biomedical field are summarized/discussed. The theoretical calculation of the physiochemical properties/biological performance of biomaterials applied in disease diagnosis, drug delivery, disease therapeutics, and specific paradigms such as biomimetic biomaterials is discussed. Additionally, the biosafety evaluation applications of theoretical simulations of biomaterials are presented. Finally, the challenges and future prospects of such computational simulations for biomaterials development are clarified. It is anticipated that these simulations would offer various methodologies for facilitating the development and future clinical translations/utilization of versatile biomaterials.

Graphene and its derivatives: "one stone, three birds" strategy for orthopedic implant-associated infections

Orthopedic implants provide an avascular surface for microbial attachment and biofilm formation, impeding the entry of immune cells and the diffusion of antibiotics. The above is an important cause of dental and orthopedic implant-associated infection (IAI). For the prevention and treatment of IAI, the drawbacks of antibiotic resistance and surgical treatment are increasingly apparent. Due to their outstanding biological properties such as biocompatibility, immunomodulatory effects, and antibacterial properties, graphene-based nanomaterials (GBNs) have been applied to bone tissue engineering to deal with IAI, and in particular have great potential application in drug/gene carriers, multi-functional platforms, and coating forms. Here we review the latest research progress and achievements in GBNs for the prevention and treatment of IAI, mainly including their biomedical applications for antibacterial and immunomodulation effects, and for inducing osteogenesis. Furthermore, the biosafety of graphene family materials in bone tissue regeneration and the feasibility of clinical application are critically analyzed and discussed.

Engineering 2D Silicene-Based Mesoporous Nanomedicine for In Vivo Near-Infrared-Triggered Analgesia

The utilization of local anesthetics for postoperative analgesia represents an effective approach, but generally suffers from short half-lives and brachychronic local neurotoxicity. A desirable anesthetic with controllable and sustainable drug-releasing performance for adequate analgesia effect is highly required. In this work, the core/shell-structured two-dimenional (2D) silicene nanosheets coated with mesoporous silica layer (abbreviated as Silicene@MSNs) have been rationally constructed as localized drug-delivery system in sciatic nerve block to achieve on-demand release of loaded ropivacaine (RP) in mesoporous silica layer for local analgesia. Based on the specific photothermal performance of 2D silicene core, this local anesthesia system can be triggered by near-infrared laser to release the loaded RP, resulting in on-demand and long-lasting regional anesthesia. The analgesia effect is assessed by pain behavior tests, which demonstrates that the RP-loaded Silicene@MSNs core/shell nanosystem behaves almost five times longer analgesia effect than free RP. Furthermore, the activation of pain-related neurons in nerve conduction pathways is tested to explore the underlying analgesia mechanism, revealing that the designed nanosystem can improve the pain threshold, reduce the activation of neurons in dorsal root ganglion and excitability in spinal substantia gelatinosa neurons. This designed anesthetic nanomedicine provides a facile but effective methodology for long-lasting regional anesthesia.

Two Dimensional Silicene Nanosheets: A New Choice of Electrode Material for High-Performance Supercapacitor

Two dimensional (2D) nanomaterials, including graphene, layered double hydroxides, layered transition metal dichalcogenides, and Mxenes, have demonstrated versatility in the fields of bioengineering, sensor, energy storage and conversion by virtue of unique mechanical, thermal, optical, and electrical properties. Nevertheless, integrating silicon-based materials into high-performance energy devices is relatively scarce and highly appreciable because of the challenging production technology. Herein, we reported that silicene was triumphantly assembled into a high-voltage symmetric supercapacitor, which possesses a wide operating potential window (0-3 V), a maximum specific capacitance of 0.41 mF cm^-2, a high energy density of 1.22 mJ cm^-2, a high power density of 0.49 mW cm^-2, and an excellent cycling stability of 96.6% capacitance retention after 10 000 cycles. The comprehensive performance of the silicene high-voltage symmetric supercapacitor is superior to that of the reported silicon-based materials. First-principles calculations reveal that monolayer or few-layer silicene with shorter ion diffusion pathways and higher utilization efficiency of active sites improves ion transport and electron transfer kinetics on the surfaces. To the best of our knowledge, it is the first time that silicene has been applied to the field of supercapacitors. This work will open up new horizons toward the material science research of electrochemical energy devices as well as help to promote the development of the high-performance supercapacitor industry.

Nontoxic silicene photothermal agents with high near-infrared absorption for disassembly of Alzheimer's amyloid‑β fibrils

The disassembly and eliminating the amyloid-β (Aβ) aggregates has become an effective way to treat Alzheimer's disease (AD). Herein, for the first time, the near-infrared (NIR) activated silicene nanosheets (SNSs) have been identified as an effective nontoxic photothermal conversion agent for irreversibly disassembly of the Aβ_33-42 aggregates. The SNSs synthesized by a combination of mild oxidation method and liquid exfoliation method possess good biocompatibility and biodegradability, and high near-infrared photothermal conversion capabilities. Under NIR light, the SNSs could disassemble the large and dense Aβ_33-42 mature fibrils into short fibrils and even form thin films, leading to the degradation rate of 96.47%. The circular dichroism spectrum, fluorescent spectra, and nanostructure were analyzed to monitor the photothermal degradation of mature Aβ_33-42 fibrils for elaborating the mechanism beneath. This study might provide a clue for developing potential therapeutic strategy for AD and related neurodegenerative diseases.

Water-Enabled H2 Generation from Hydrogenated Silicon Nanosheets for Efficient Anti-Inflammation

As an emerging therapeutic gas, hydrogen (H₂) is gifted with excellent biosafety, high tissue permeability, and radical-trapping capacity and is extensively considered as a highly promising antioxidant in clinics. However, a facile and effective strategy of H₂ production for major inflammatory disease treatments is still lacking. In this study, by a facile wet-chemical exfoliation synthesis, a hydrogen-terminated silicon nanosheet (H-silicene) has been synthesized, which can favorably react with environmental water to generate H₂ rapidly and continuously without any external energy input. Furthermore, theoretical calculations were employed to reveal the mechanism of enhanced H₂ generation efficacy of H-silicene nanosheets. The as-synthesized H-silicene has been explored as a flexible hydrogen gas generator for efficient antioxidative stress application for the first time, which highlights a promising prospect of this two-dimensional H-silicene nanomaterial for acute inflammatory treatments by on-demand H₂ production-enabled reactive oxygen species scavenging. This study provides a novel and efficient modality for nanomaterial-mediated H₂ therapy.

2D materials-based nanomedicine: From discovery to applications

Due to their unique physicochemical characteristics, 2D materials have attracted more and more attention in the biomedicine field. Currently, 2D materials-based nanomedicines have been extensively applied in various diseases including cancer, bacterial infection, tissue engineering, biological protection, neurodegenerative diseases, and cardiovascular disease. Depending on their various characteristics, these 2D nanomedicines exert their therapeutic effect in different ways, showing great clinical application prospects. Herein, we focus on the various biomedical applications of 2D materials-based nanomedicine. The structures and characteristics of several typical 2D nanomaterials with different configurations and their corresponding biomedical applications are first introduced. Then, the potential of 2D nanomedicines on therapeutic and imaging and their biological functionalization are discussed. Furthermore, the therapeutic potentials of 2D nanomedicines in various diseases are also comprehensively summarized. At last, the challenges and perspectives for the advancement of 2D nanomedicines in clinical transformation are outlooks.

Density-functional-theory simulations of the water and ice adhesion on silicene quantum dots

The absorption of water and ice on silicon is important to understand for many applications and safety concerns for electronic devices as most of them are fabricated using silicon. Meanwhile, recently silicene nanostructures have attracted much attention due to their potential applications in electronic devices such as gas or humidity sensors. However, for the moment, the theoretical study of the interaction between water molecules and silicene nanostructures is still rare although there is already theoretical work on the effect of water molecules on the silicene periodic structure. The specific conditions such as the finite size effect, the edge saturation of the silicene nanostructure, and the distance between the water/ice and the silicene at the initial onset of the contact have not been carefully considered before. Here we have modelled the absorption of a water molecule and a square ice on the silicene nanodot by using hybrid-exchange density-functional theory, complemented by the Van der Waals forces correction. Three different sizes of silicene nanodots have been chosen for simulations, namely \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$3\times 3$$\end{document}3×3, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$4\times 4$$\end{document}4×4, and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$5\times 5$$\end{document}5×5, with and without the hydrogen saturation on the edge. Our calculations suggest that the silicene nanodots chosen here are both hydrophilic and ice-philic. The water molecule and the square ice have tilted angles towards the silicene nanodot plane at ~ 70º and ~ 45º, respectively, which could be owing to the zig–zag structure on silicene. The absorption energies are size dependent for unsaturated silicene nanodots, whereas almost size independent for the hydrogen saturated cases. Our work on the single water molecule absorption energy on silicene nanodots is qualitatively in agreement with the previous theoretical and experimental work. However, the ice structure on silicene is yet to be validated by the relevant experiments. Our calculation results not only further complement the current paucity of water-to-silicene-nanostructure contact mechanisms, but also lead to the first study of square-ice contact mechanisms for silicene. Our findings presented here could be useful for the future design of semiconducting devices based on silicene nanostructures, especially in the humid and low-temperature environments.

Hundred-gram scale fabrication of few-layered silicene by a continuous vapor-dealloying strategy for high-performance lithium storage

A continuous vapor de-alloying strategy for a hundred-gram scale fabrication of silicene is developed by etching CaSi₂ using waste polyvinyl chloride (PVC). The as-obtained few-layered silicene can be readily assembled with carbon nanotubes into flexible electrodes for lithium storage with excellent performance, which stably deliver a high capacity and stability. This strategy can be extended to other silicon analogs with various structures by selecting precursors such as Mg₂Si and Al/Si alloy.

2D Polymer Nanonets: Controllable Constructions and Functional Applications

Two-dimensional (2D) polymer nanonets have demonstrated great potential in various application fields due to their integrated advantages of ultrafine diameter, small pore size, high porosity, excellent interconnectivity, and large specific surface area. Here, a comprehensive overview of the controlled constructions of the polymer nanonets derived from electrospinning/netting, direct electronetting, self-assembly of cellulose nanofibers, and nonsolvent-induced phase separation is provided. Then, the widely researched multifunctional applications of polymer nanonets in filtration, sensor, tissue engineering, and electricity are also given. Finally, the challenges and possible directions for further developing the polymer nanonets are also intensively highlighted. This article is protected by copyright. All rights reserved.

Van der Waals Heteroepitaxy of Air-Stable Quasi-Free-Standing Silicene Layers on CVD Epitaxial Graphene/6H-SiC

Graphene, consisting of an inert, thermally stable material with an atomically flat, dangling-bond-free surface, is by essence an ideal template layer for van der Waals heteroepitaxy of two-dimensional materials such as silicene. However, depending on the synthesis method and growth parameters, graphene (Gr) substrates could exhibit, on a single sample, various surface structures, thicknesses, defects, and step heights. These structures noticeably affect the growth mode of epitaxial layers, e.g., turning the layer-by-layer growth into the Volmer-Weber growth promoted by defect-assisted nucleation. In this work, the growth of silicon on chemical vapor deposited epitaxial Gr (1 ML Gr/1 ML Gr buffer) on a 6H-SiC(0001) substrate is investigated by a combination of atomic force microscopy (AFM), scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and Raman spectroscopy measurements. It is shown that the perfect control of full-scale almost defect-free 1 ML Gr with a single surface structure and the ultraclean conditions for molecular beam epitaxy deposition of silicon represent key prerequisites for ensuring the growth of extended silicene sheets on epitaxial graphene. At low coverages, the deposition of Si produces large silicene sheets (some hundreds of nanometers large) attested by both AFM and SEM observations and the onset of a Raman peak at 560 cm^-1, very close to the theoretical value of 570 cm^-1 calculated for free-standing silicene. This vibrational mode at 560 cm^-1 represents the highest ever experimentally measured value and is representative of quasi-free-standing silicene with almost no interaction with inert nonmetal substrates. From a coverage rate of 1 ML, the silicene sheets disappear at the expense of 3D Si dendritic islands whose density, size, and thickness increase with the deposited thickness. From this coverage, the Raman mode assigned to quasi-free-standing silicene totally vanishes, and the 2D flakes of silicene are no longer observed by AFM. The experimental results are in very good agreement with the results of kinetic Monte Carlo simulations that rationalize the initial flake growth in solid-state dewetting conditions, followed by the growth of ridges surrounding and eventually covering the 2D flakes. A full description of the growth mechanism is given. This study, which covers a wide range of growth parameters, challenges recent results stating the impossibility to grow silicene on a carbon inert surface and is very promising for large-scale silicene growth. It shows that silicene growth can be achieved using perfectly controlled and ultraclean deposition conditions and an almost defect-free Gr substrate.

Silicene/poly(N-isopropylacrylamide) smart hydrogels as remote light-controlled switches

Smart hydrogels with good flexibility and biocompatibility have been widely used. The common near-infrared (NIR) photothermal agents are facing a trade-off between good photothermal-conversion efficiency and high biocompatibility. Therefore, developing new metal-free photothermal agents with low cost, high biocompatibility and excellent phase stability is still in urgent need. In this study, we successfully combined poly(N-isopropylacrylamide) (PNIPAM) with the two-dimensional (2D) silicene nanosheets via the in situ polymerization method. Attributed to the thermal-responsive nature of PNIPAM and the excellent photothermal properties of 2D silicene, the obtained silicene/PNIPAM composite hydrogels exhibited dual thermal and NIR responsive properties. This smart hydrogel showed rapid, reversible and repeatable NIR light-responsive behaviors. The volume of this smart hydrogels can shrink significantly under NIR irradiation and recover to its original size without the NIR irradiation. Remote near-infrared light-controlled microfluidic pipelines and electronic switches based on obtained silicene/PNIPAM composite hydrogels were also demonstrated. This work significantly broadens the application prospects of silicene-based hydrogels in remote light-controlled devices.

Exploring a silicene monolayer as a promising sensor platform to detect and capture NO and CO gas

Searching for new two-dimensional (2D) materials for the early and efficient detection and capture of toxic gas has received special attention from researchers. In this work, we investigate the adsorption of NO and CO molecules onto a silicene monolayer using first-principles calculations. Different numbers of adsorbates, as well as adsorption configurations, have been considered. The results show that up to four NO molecules can be chemically adsorbed onto the pristine monolayer with adsorption energies varying between −0.32 and −1.22 eV per molecule. In these cases, the gas adsorption induces feature-rich electronic behaviors, including magnetic semiconducting and half-metallicity, where the magnetic properties are produced mainly by the adsorbates. Except for two CO molecules adsorbing onto two adjacent Si atoms with an adsorption energy of −0.26 eV per molecule, other adsorption configurations show weak physisorption of CO molecules onto the pristine silicene platform. However, the sensitivity can be enhanced considerably by doping with Al atoms, drastically reducing the adsorption energy to between −0.19 and −0.71 eV per molecule. The doping and adsorption process may lead to either band gap opening or metallization, depending on its configuration. This study reveals the promising applicability of pristine and Al doped silicene monolayers as sensors for more than one single NO and CO molecule.

Magnetic and electronic properties of the NO-adsorbed silicene monolayer have been investigated.

Pt Decorated Ti3C2Tx MXene with NIR-II Light Amplified Nanozyme Catalytic Activity for Efficient Phototheranostics

The clinical application of photothermal therapy (PTT) is severely limited by the tissue penetration depth of excitation light, and enzyme therapy is hampered by its low therapeutic efficiency. As a two-dimensional ultrathin nanosheet with high absorbance in the near-infrared-II (NIR-II) region, the titanium carbide (Ti₃C₂) nanosheet can be used as a substrate to anchor functional components, like nanozymes and nanodrugs. Here, we decorate Pt artificial nanozymes on the Ti₃C₂ nanosheets to synthesize Ti-based MXene nanocomposites (Ti₃C₂T_x-Pt-PEG). In the tumor microenvironment, the Pt nanoparticles exhibit peroxidase-like (POD-like) activity, which can in situ catalyze hydrogen peroxide to generate hydroxyl radicals (^•OH) to induce cell apoptosis and necrosis. Meanwhile, the composite shows a desirable photothermal effect upon NIR-II light irradiation with a low power density (0.75 W cm^-2). Especially, the POD-like activity is significantly enhanced by the elevated temperature arising from the photothermal effect of Ti₃C₂T_x. Therefore, satisfactory synergistic PTT/enzyme therapy has been accomplished, accompanied by an applicable photoacoustic imaging capability to monitor and guide the therapeutic process. This work may provide an approach for hyperthermia-amplified nanozyme catalytic therapy, especially based on metal catalysts and MXene nanocomposites.

Formation and properties of iodine- and acetonitrile-functionalized two-dimensional Si materials: a Density Functional Theory study

Topotactic transformations of suitable layered three-dimensional precursors are among the most robust methods to prepare two-dimensional (2D) materials based on silicon or germanium. Here we use Density Functional Theory calculations to probe the mechanisms underlying the formation of 2D-Si sheets functionalized with iodine atoms (SiI) or acetonitrile molecules [Si(MeCN)] starting from a layered CaSi₂ precursor. We identify the sequence of exothermic surface reactions that enable the adsorption of, not only iodine atoms, but, surprisingly, also of solvent acetonitrile molecules on both sides of the top layer of a Si-terminated CaSi₂ surface and its ensuing exfoliation as a standalone 2D sheet. In the acetonitrile case, the as-formed 2D material exhibits intriguing structural and electronic properties with an unusual quasi-one-dimensional substructure of silicon chains and a Dirac-like cone in the energy band diagram. The results elucidate the atomic-scale details of the established experimental technique of topotactic synthesis of functionalized silicene and identify new structural motifs for 2D materials.

Converging 2D Nanomaterials and 3D Bioprinting Technology: State-of-the-Art, Challenges, and Potential Outlook in Biomedical Applications

The development of next-generation of bioinks aims to fabricate anatomical size 3D scaffold with high printability and biocompatibility. Along with the progress in 3D bioprinting, 2D nanomaterials (2D NMs) prove to be emerging frontiers in the development of advanced materials owing to their extraordinary properties. Harnessing the properties of 2D NMs in 3D bioprinting technologies can revolutionize the development of bioinks by endowing new functionalities to the current bioinks. First the main contributions of 2D NMS in 3D bioprinting technologies are categorized here into six main classes: 1) reinforcement effect, 2) delivery of bioactive molecules, 3) improved electrical conductivity, 4) enhanced tissue formation, 5) photothermal effect, 6) and stronger antibacterial properties. Next, the recent advances in the use of each certain 2D NMs (1) graphene, 2) nanosilicate, 3) black phosphorus, 4) MXene, 5) transition metal dichalcogenides, 6) hexagonal boron nitride, and 7) metal-organic frameworks) in 3D bioprinting technology are critically summarized and evaluated thoroughly. Third, the role of physicochemical properties of 2D NMSs on their cytotoxicity is uncovered, with several representative examples of each studied 2D NMs. Finally, current challenges, opportunities, and outlook for the development of nanocomposite bioinks are discussed thoroughly.

2D Silicene Nanosheets for High-Performance Zinc-Ion Hybrid Capacitor Application

Supercapacitors possessing fast-charging characteristics and long lifespan are becoming increasingly important for powering portable and smart energy storage devices, and combining capacitive and battery-type materials into an integrated device is an effective method for increasing the overall performance of capacitors. Silicene is being designed as a cathode for the development of enhanced capacitance and ultra-cycle stable zinc-ion hybrid capacitors. Possessing a maximum areal capacity of 14 mF cm^-2, a maximum power density of 9 mW cm^-2, capacitance retention of 112% even after 10 000 cycles, and an unexpectedly high energy density of 23 mJ cm^-2, this achievement of the zinc-ion hybrid capacitor would be superior to that of previously reported silicon-based supercapacitors. The DFT calculations further reveal that Zn ions dominate the capacitive behavior of the silicene electrode. The support association between silicene and zinc-ion hybrid capacitors so that they can take advantage of each other's strengths, which takes electrochemical energy technology to a stage, offering a straightforward proposal for integration and implementation of silicon-based materials.

Two-dimensional biomaterials: material science, biological effect and biomedical engineering applications

To date, nanotechnology has increasingly been identified as a promising and efficient means to address a number of challenges associated with public health. In the past decade, two-dimensional (2D) biomaterials, as a unique nanoplatform with planar topology, have attracted explosive interest in various fields such as biomedicine due to their unique morphology, physicochemical properties and biological effect. Motivated by the progress of graphene in biomedicine, dozens of types of ultrathin 2D biomaterials have found versatile bio-applications, including biosensing, biomedical imaging, delivery of therapeutic agents, cancer theranostics, tissue engineering, as well as others. The effective utilization of 2D biomaterials stems from the in-depth knowledge of structure-property-bioactivity-biosafety-application-performance relationships. A comprehensive summary of 2D biomaterials for biomedicine is still lacking. In this comprehensive review, we aim to concentrate on the state-of-the-art 2D biomaterials with a particular focus on their versatile biomedical applications. In particular, we discuss the design, fabrication and functionalization of 2D biomaterials used for diverse biomedical applications based on the up-to-date progress. Furthermore, the interactions between 2D biomaterials and biological systems on the spatial-temporal scale are highlighted, which will deepen the understanding of the underlying action mechanism of 2D biomaterials aiding their design with improved functionalities. Finally, taking the bench-to-bedside as a focus, we conclude this review by proposing the current crucial issues/challenges and presenting the future development directions to advance the clinical translation of these emerging 2D biomaterials.

Hydrogen-bonded silicene nanosheets of engineered bandgap and selective degradability for photodynamic therapy

Silicon, a highly biocompatible and ubiquitous chemical element in living systems, exhibits great potentials in biomedical applications. However, the silicon-based nanomaterials such as silica and porous silicon have been largely limited to only serving as carriers for delivery systems, due to the lack of intrinsic functionalities of silicon. This work presents the facile construction of a two-dimensional (2D) hydrogen-bonded silicene (H-silicene) nanosystem which is highlighted with tunable bandgap and selective degradability for tumor-specific photodynamic therapy facilely by surface covalent modification of hydrogen atoms. Briefly, the H-silicene nanosheet material is selectively degradable in normal neutral tissues but rather stable in the mildly acidic tumor microenvironment (TME) for achieving efficient photodynamic therapy (PDT). Such a 2D hydrogen-bonded silicene nanosystem featuring the tunable bandgap and tumor-selective degradability provides a new paradigm for the application of multi-functional two-dimensional silicon-based biomaterials towards the diagnosis and treatments of cancer and other diseases.

Two-Dimensional Silicene/Silicon Nanosheets: An Emerging Silicon-Composed Nanostructure in Biomedicine

Silicon-composed nanomedicines are one of the most representative inorganic nanosystems in theranostic biomedicine. The emerging of new family members of silicon-composed nanosystems substantially contributes to their further clinical translation. 2D silicene/silicon nanosheets have recently been developed as an emerging topology of silicon-composed nanoparticles, which features unique planar nanostructure with large surface area, abundant surface chemistry, specific physiochemical property, and desirable biological effects. This progress report highlights and discusses the state-of-art developments of the elaborate construction of 2D silicene/silicon nanosheets for versatile biomedical applications, including top-down fabrication, multifunctionalization, surface engineering, and their available biomedical applications in tumor theranostics (e.g., bioimaging, photothermal ablation, chemotherapy, chemoreactive nanotherapy, radiotherapy, and synergistic nanotherapy) and antibacteria. Their large surface area originating from 2D nanostructure not only enables efficient loading and delivery of chemotherapeutic drugs, but also guarantees the multifunctionalization. Especially, 2D silicene/silicon nanosheets harness desirable photothermal-conversion performance for photonic hyperthermia and photoacoustic imaging in the near infrared biowindow, accompanied with the desirable biodegradability and biocompatibility, which is typically not possessed in other silicon-composed counterparts. The multivariate analysis on the facing challenges and future developments of these 2D silicene/silicon nanosheets have also been conducted and outlooked for further underpinning their clinical translations.

Inorganic nanomaterials with rapid clearance for biomedical applications

Inorganic nanomaterials that have inherently exceptional physicochemical properties (e.g., catalytic, optical, thermal, electrical, or magnetic performance) that can provide desirable functionality (e.g., drug delivery, diagnostics, imaging, or therapy) have considerable potential for application in the field of biomedicine. However, toxicity can be caused by the long-term, non-specific accumulation of these inorganic nanomaterials in healthy tissues, preventing their large-scale clinical utilization. Over the past several decades, the emergence of biodegradable and clearable inorganic nanomaterials has offered the potential to prevent such long-term toxicity. In addition, a comprehensive understanding of the design of such nanomaterials and their metabolic pathways within the body is essential for enabling the expansion of theranostic applications for various diseases and advancing clinical trials. Thus, it is of critical importance to develop biodegradable and clearable inorganic nanomaterials for biomedical applications. This review systematically summarizes the recent progress of biodegradable and clearable inorganic nanomaterials, particularly for application in cancer theranostics and other disease therapies. The future prospects and opportunities in this rapidly growing biomedical field are also discussed. We believe that this timely and comprehensive review will stimulate and guide additional in-depth studies in the area of inorganic nanomedicine, as rapid in vivo clearance and degradation is likely to be a prerequisite for the future clinical translation of inorganic nanomaterials with unique properties and functionality.

Recent Advances in Immunosafety and Nanoinformatics of Two-Dimensional Materials Applied to Nano-imaging

Two-dimensional (2D) materials have emerged as an important class of nanomaterials for technological innovation due to their remarkable physicochemical properties, including sheet-like morphology and minimal thickness, high surface area, tuneable chemical composition, and surface functionalization. These materials are being proposed for new applications in energy, health, and the environment; these are all strategic society sectors toward sustainable development. Specifically, 2D materials for nano-imaging have shown exciting opportunities in in vitro and in vivo models, providing novel molecular imaging techniques such as computed tomography, magnetic resonance imaging, fluorescence and luminescence optical imaging and others. Therefore, given the growing interest in 2D materials, it is mandatory to evaluate their impact on the immune system in a broader sense, because it is responsible for detecting and eliminating foreign agents in living organisms. This mini-review presents an overview on the frontier of research involving 2D materials applications, nano-imaging and their immunosafety aspects. Finally, we highlight the importance of nanoinformatics approaches and computational modeling for a deeper understanding of the links between nanomaterial physicochemical properties and biological responses (immunotoxicity/biocompatibility) towards enabling immunosafety-by-design 2D materials.

Assessment of the effect of external and internal triggers on adsorption and release of paclitaxel from the PEI functionalized silicene nanosheet: A molecular dynamic simulation

In order to examine the adsorption mechanisms of paclitaxel (PTX) on silicene nanosheet (SNS) molecular dynamics (MD) simulations are carried out. The MD outcomes show that the adsorption of PTX on the pristine SNS is exothermic and spontaneous. The interaction between the PTX molecule and the pristine SNS is mainly due to the formation of π-π interactions through their aromatic rings, which are supplemented by X-π (X = N-H, C-H, and CO) interactions. Upon functionalization of SNS by Polyethylenimine (PEI), drug molecules prefer to bind to the nanocarrier instead of the polymer. In the functionalized SNS (f-SNS), the binding energy of the drug with the nanocarrier becomes stronger in comparison to the SNS case (E_ads: -2468.91 vs -840.95 kJ/mol). At the acidic condition, protonation of drug and PEI cause that the interaction between PTX and the nanocarrier become weaker and drug molecules could release from the nanocarrier surface. Finally, two f-SNS and protonated f-SNS (f-pSNS) systems are induced by the electric field (EF). Evaluation of the dynamic properties of these systems (with strengths 0.5 and 1 V/nm) shows that the electric field could be acted as a stimulus for drug release from nanocarriers. The obtained results from this study provide valuable information about the loading/release mechanisms of PTX on/from the SNS surface.

Cryogenic Exfoliation of 2D Stanene Nanosheets for Cancer Theranostics

Stanene (Sn)-based materials have been extensively applied in industrial production and daily life, but their potential biomedical application remains largely unexplored, which is due to the absence of the appropriate and effective methods for fabricating Sn-based biomaterials. Herein, we explored a new approach combining cryogenic exfoliation and liquid-phase exfoliation to successfully manufacture two-dimensional (2D) Sn nanosheets (SnNSs). The obtained SnNSs exhibited a typical sheet-like structure with an average size of ~ 100 nm and a thickness of ~ 5.1 nm. After PEGylation, the resulting PEGylated SnNSs (SnNSs@PEG) exhibited good stability, superior biocompatibility, and excellent photothermal performance, which could serve as robust photothermal agents for multi-modal imaging (fluorescence/photoacoustic/photothermal imaging)-guided photothermal elimination of cancer. Furthermore, we also used first-principles density functional theory calculations to investigate the photothermal mechanism of SnNSs, revealing that the free electrons in upper and lower layers of SnNSs contribute to the conversion of the photo to thermal. This work not only introduces a new approach to fabricate 2D SnNSs but also establishes the SnNSs-based nanomedicines for photonic cancer theranostics. This new type of SnNSs with great potential in the field of nanomedicines may spur a wave of developing Sn-based biological materials to benefit biomedical applications.

Thermodynamic Insights into Polymorphism-Driven Lithium-Ion Storage in Monoelemental 2D Materials

Monoelemental two-dimensional materials (borophene, silicene, etc.) are exciting candidates for electrodes in lithium-ion batteries because of their ultralight molar mass. However, these materials' lithium-ion binding mechanism can be complex as the inherited polymorphism may induce phase changes during the charge-discharge cycles. Here, we combine genetic-algorithm-based bottom-up and stochastic top-down structure searching techniques to conduct thermodynamic scrutiny of the lithiated compounds of 2D allotropes of four elements: B, Al, Si, and P. Our first-principles-based high-throughput computations unveil polymorphism-driven lithium-ion binding process and other nonidealities (e.g., bond cleavage, adsorbent phase change, and electroplating), which lacks mention in earlier works. While monolayer B (2479 mAh/g), Al (993 mAh/g), and Si (954 mAh/g) have been demonstrated here as excellent candidates for Li-ion storage, P falls short of the expectation. Our well-designed computational framework, which always searches for lithiated structures at global minima, provides convincing thermodynamical insights and realistic reversible specific-capacity values. This will expectedly open up future experimental efforts to design monoelemental two-dimensional material-based anodes with specific polymorphic structures.

Tiny 2D silicon quantum sheets: a brain photonic nanoagent for orthotopic glioma theranostics

We report that atomically thin two-dimensional silicon quantum sheets (2D Si QSs), prepared by a scalable approach coupling chemical delithiation and cryo-assisted exfoliation, can serve as a high-performance brain photonic nanoagent for orthotopic glioma theranostics. With the lateral size of approximately 14.0 nm and thickness of about 1.6 nm, tiny Si QSs possess high mass extinction coefficient of 27.5 L g^-1 cm^-1 and photothermal conversion efficiency of 47.2% at 808 nm, respectively, concurrently contributing to the best photothermal performance among the reported 2D mono-elemental materials (Xenes). More importantly, Si QSs with low toxicity maintain the trade-off between stability and degradability, paving the way for practical clinical translation in consideration of both storage and action of nanoagents. In vitro Transwell filter experiment reveals that Si QSs could effectively go across the bEnd.3 cells monolayer. Upon the intravenous injection of Si QSs, orthotopic brain tumors are effectively inhibited under the precise guidance of photoacoustic imaging, and the survival lifetime of brain tumor-bearing mice is increased by two fold. Atomically thin Si QSs with strong light-harvesting capability are expected to provide an effective and robust 2D photonic nanoplatform for the management of brain diseases.

Fast and Low-Cost Synthesis of MoS2 Nanostructures on Paper Substrates for Near-Infrared Photodetectors

Recent advances in the production and development of two-dimensional transition metal dichalcogenides (2D TMDs) allow applications of these materials, with a structure similar to that of graphene, in a series of devices as promising technologies for optoelectronic applications. In this work, molybdenum disulfide (MoS2) nanostructures were grown directly on paper substrates through a microwave-assisted hydrothermal synthesis. The synthesized samples were subjected to morphological, structural, and optical analysis, using techniques such as scanning electron microscopy (SEM), X-ray diffraction (XRD), and Raman. The variation of synthesis parameters, as temperature and synthesis time, allowed the manipulation of these nanostructures during the growth process, with alteration of the metallic (1T) and semiconductor (2H) phases. By using this synthesis method, two-dimensional MoS2 nanostructures were directly grown on paper substrates. The MoS2 nanostructures were used as the active layer, to produce low-cost near-infrared photodetectors. The set of results indicates that the interdigital MoS2 photodetector with the best characteristics (responsivity of 290 mA/W, detectivity of 1.8 × 109 Jones and external quantum efficiency of 37%) was obtained using photoactive MoS2 nanosheets synthesized at 200 °C for 120 min.