1
|
Tian X, Guo Y, Zhang J, Ivasishin OM, Jia J, Yan J. Fiber Actuators Based on Reversible Thermal Responsive Liquid Crystal Elastomer. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2024; 20:e2306952. [PMID: 38175860 DOI: 10.1002/smll.202306952] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/14/2023] [Revised: 12/16/2023] [Indexed: 01/06/2024]
Abstract
Soft actuators inspired by the movement of organisms have attracted extensive attention in the fields of soft robotics, electronic skin, artificial intelligence, and healthcare due to their excellent adaptability and operational safety. Liquid crystal elastomer fiber actuators (LCEFAs) are considered as one of the most promising soft actuators since they can provide reversible linear motion and are easily integrated or woven into complex structures to perform pre-programmed movements such as stretching, rotating, bending, and expanding. The research on LCEFAs mainly focuses on controllable preparation, structural design, and functional applications. This review, for the first time, provides a comprehensive and systematic review of recent advances in this important field by focusing on reversible thermal response LCEFAs. First, the thermal driving mechanism, and direct and indirect heating strategies of LCEFAs are systematically summarized and analyzed. Then, the fabrication methods and functional applications of LCEFAs are summarized and discussed. Finally, the challenges and technical difficulties that may hinder the performance improvement and large-scale production of LCEFAs are proposed, and the development opportunities of LCEFAs are prospected.
Collapse
Affiliation(s)
- Xuwang Tian
- College of Materials Science and Engineering, Key Laboratory of Automobile Materials Ministry of Education, Jilin University, Changchun, 130012, China
| | - Yongshi Guo
- College of Textile, Donghua University, Shanghai, 201620, China
| | - Jiaqi Zhang
- College of Materials Science and Engineering, Key Laboratory of Automobile Materials Ministry of Education, Jilin University, Changchun, 130012, China
| | - Orest M Ivasishin
- College of Materials Science and Engineering, Key Laboratory of Automobile Materials Ministry of Education, Jilin University, Changchun, 130012, China
| | - Jiru Jia
- School of Textile Garment and Design, Changshu Institute of Technology, Suzhou, Jiangsu, 215500, China
| | - Jianhua Yan
- College of Textile, Donghua University, Shanghai, 201620, China
| |
Collapse
|
2
|
Shan Y, Zhao Y, Wang H, Dong L, Pei C, Jin Z, Sun Y, Liu T. Variable stiffness soft robotic gripper: design, development, and prospects. BIOINSPIRATION & BIOMIMETICS 2023; 19:011001. [PMID: 37948756 DOI: 10.1088/1748-3190/ad0b8c] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/12/2023] [Accepted: 11/10/2023] [Indexed: 11/12/2023]
Abstract
The advent of variable stiffness soft robotic grippers furnishes a conduit for exploration and manipulation within uncharted, non-structured environments. The paper provides a comprehensive review of the necessary technologies for the configuration design of soft robotic grippers with variable stiffness, serving as a reference for innovative gripper design. The design of variable stiffness soft robotic grippers typically encompasses the design of soft robotic grippers and variable stiffness modules. To adapt to unfamiliar environments and grasp unknown objects, a categorization and discussion have been undertaken based on the contact and motion manifestations between the gripper and the things across various dimensions: points contact, lines contact, surfaces contact, and full-bodies contact, elucidating the advantages and characteristics of each gripping type. Furthermore, when designing soft robotic grippers, we must consider the effectiveness of object grasping methods but also the applicability of the actuation in the target environment. The actuation is the propelling force behind the gripping motion, holding utmost significance in shaping the structure of the gripper. Given the challenge of matching the actuation of robotic grippers with the target scenario, we reviewed the actuation of soft robotic grippers. We analyzed the strengths and limitations of various soft actuation, providing insights into the actuation design for soft robotic grippers. As a crucial technique for variable stiffness soft robotic grippers, variable stiffness technology can effectively address issues such as poor load-bearing capacity and instability caused by the softness of materials. Through a retrospective analysis of variable stiffness theory, we comprehensively introduce the development of variable stiffness theory in soft robotic grippers and showcase the application of variable stiffness grasping technology through specific case studies. Finally, we discuss the future prospects of variable stiffness grasping robots from several perspectives of applications and technologies.
Collapse
Affiliation(s)
- Yu Shan
- Key Laboratory of Parallel Robot and Mechatronic System, Yanshan University, Qinhuangdao, Hebei Province, People's Republic of China
| | - Yanzhi Zhao
- Key Laboratory of Parallel Robot and Mechatronic System, Yanshan University, Qinhuangdao, Hebei Province, People's Republic of China
| | - Haobo Wang
- Key Laboratory of Parallel Robot and Mechatronic System, Yanshan University, Qinhuangdao, Hebei Province, People's Republic of China
| | - Liming Dong
- Key Laboratory of Parallel Robot and Mechatronic System, Yanshan University, Qinhuangdao, Hebei Province, People's Republic of China
| | - Changlei Pei
- Key Laboratory of Parallel Robot and Mechatronic System, Yanshan University, Qinhuangdao, Hebei Province, People's Republic of China
| | - Zhaopeng Jin
- Key Laboratory of Parallel Robot and Mechatronic System, Yanshan University, Qinhuangdao, Hebei Province, People's Republic of China
| | - Yue Sun
- Key Laboratory of Parallel Robot and Mechatronic System, Yanshan University, Qinhuangdao, Hebei Province, People's Republic of China
| | - Tao Liu
- Key Laboratory of Parallel Robot and Mechatronic System, Yanshan University, Qinhuangdao, Hebei Province, People's Republic of China
| |
Collapse
|
3
|
Yuan Z, Guo Q, Jin D, Zhang P, Yang W. Biohybrid Soft Robots Powered by Myocyte: Current Progress and Future Perspectives. MICROMACHINES 2023; 14:1643. [PMID: 37630179 PMCID: PMC10456826 DOI: 10.3390/mi14081643] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/26/2023] [Revised: 08/17/2023] [Accepted: 08/19/2023] [Indexed: 08/27/2023]
Abstract
Myocyte-driven robots, a type of biological actuator that combines myocytes with abiotic systems, have gained significant attention due to their high energy efficiency, sensitivity, biocompatibility, and self-healing capabilities. These robots have a unique advantage in simulating the structure and function of human tissues and organs. This review covers the research progress in this field, detailing the benefits of myocyte-driven robots over traditional methods, the materials used in their fabrication (including myocytes and extracellular materials), and their properties and manufacturing techniques. Additionally, the review explores various control methods, robot structures, and motion types. Lastly, the potential applications and key challenges faced by myocyte-driven robots are discussed and summarized.
Collapse
Affiliation(s)
- Zheng Yuan
- School of Electromechanical and Automotive Engineering, Yantai University, Yantai 264005, China; (Z.Y.); (Q.G.)
| | - Qinghao Guo
- School of Electromechanical and Automotive Engineering, Yantai University, Yantai 264005, China; (Z.Y.); (Q.G.)
| | - Delu Jin
- School of Human Ities and Social Science, Xi’an Jiaotong University, Xi’an 710049, China;
| | - Peifan Zhang
- Control Science and Engineering, Naval Aviation University, Yantai 264001, China
| | - Wenguang Yang
- School of Electromechanical and Automotive Engineering, Yantai University, Yantai 264005, China; (Z.Y.); (Q.G.)
| |
Collapse
|
4
|
Rogóż M, Dziekan Z, Dradrach K, Zmyślony M, Nałęcz-Jawecki P, Grabowski P, Fabjanowicz B, Podgórska M, Kudzia A, Wasylczyk P. From Light-Powered Motors, to Micro-Grippers, to Crawling Caterpillars, Snails and Beyond-Light-Responsive Oriented Polymers in Action. MATERIALS (BASEL, SWITZERLAND) 2022; 15:8214. [PMID: 36431699 PMCID: PMC9698796 DOI: 10.3390/ma15228214] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 10/07/2022] [Revised: 11/12/2022] [Accepted: 11/15/2022] [Indexed: 06/16/2023]
Abstract
"How would you build a robot, the size of a bacteria, powered by light, that would swim towards the light source, escape from it, or could be controlled by means of different light colors, intensities or polarizations?" This was the question that Professor Diederik Wiersma asked PW on a sunny spring day in 2012, when they first met at LENS-the European Laboratory of Nonlinear Spectroscopy-in Sesto Fiorentino, just outside Florence in northern Italy. It was not just a vague question, as Prof. Wiersma, then the LENS director and leader of one of its research groups, already had an idea (and an ERC grant) about how to actually make such micro-robots, using a class of light-responsive oriented polymers, liquid crystal elastomers (LCEs), combined with the most advanced fabrication technique-two-photon 3D laser photolithography. Indeed, over the next few years, the LCE technology, successfully married with the so-called direct laser writing at LENS, resulted in a 60 micrometer long walker developed in Prof. Wiersma's group (as, surprisingly, walking at that stage proved to be easier than swimming). After completing his post-doc at LENS, PW returned to his home Faculty of Physics at the University of Warsaw, and started experimenting with LCE, both in micrometer and millimeter scales, in his newly established Photonic Nanostructure Facility. This paper is a review of how the ideas of using light-powered soft actuators in micromechanics and micro-robotics have been evolving in Warsaw over the last decade and what the outcomes have been so far.
Collapse
|
5
|
Kim DS, Lee YJ, Wang Y, Park J, Winey KI, Yang S. Self-Folding Liquid Crystal Network Filaments Patterned with Vertically Aligned Mesogens. ACS APPLIED MATERIALS & INTERFACES 2022; 14:50171-50179. [PMID: 36282177 DOI: 10.1021/acsami.2c14947] [Citation(s) in RCA: 5] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/16/2023]
Abstract
Fibrous soft actuators with high molecular anisotropy are of interest for shape morphing from 1D to 2D and 3D in response to external stimuli with high actuation efficiency. Nevertheless, few have fabricated fibrous actuators with controlled molecular orientations and stiffness. Here, we fabricate filaments from liquid crystal networks (LCNs) with segmental crosslinking density and gradient porosity from a mixture of di-acrylate mesogenic monomers and small-molecule nematic or smectic liquid crystals (LCs) filled in a capillary. During photopolymerization, phase separation between the small-molecule LCs and LCN occurs, making one side of the filament considerably denser than the other side. To direct its folding mode (bending or twisting), we control the alignment of LC molecules within the capillary, either along or perpendicular to the filament long axis. We show that the direction of UV exposure can determine the direction of phase separation, which in turn direct the deformation of the filament after removal of the small-molecule LCs. We find that the vertical alignment of LCs within the filament is essential to efficiently direct bending deformation. By photopatterning the filament with segmental crosslinking density, we can induce a reversible folding/unfolding into 2D and 3D geometries triggered by deswelling/swelling in an organic solvent. Moreover, by taking advantage of the large elastic modulus of LCNs and large contrast of the modulus before and after swelling, we show that the self-folded LCP filament could act as a strong gripper.
Collapse
Affiliation(s)
- Dae Seok Kim
- Department of Materials Science and Engineering, University of Pennsylvania, 3231 Walnut Street, Philadelphia, Pennsylvania 19104, United States
- Department of Polymer Engineering, Pukyong National University, 45 Yongso-ro, Nam-gu, Busan 48513, South Korea
| | - Young-Joo Lee
- Department of Materials Science and Engineering, University of Pennsylvania, 3231 Walnut Street, Philadelphia, Pennsylvania 19104, United States
| | - Yuchen Wang
- Department of Materials Science and Engineering, University of Pennsylvania, 3231 Walnut Street, Philadelphia, Pennsylvania 19104, United States
| | - Jinseok Park
- Department of Materials Science and Engineering, University of Pennsylvania, 3231 Walnut Street, Philadelphia, Pennsylvania 19104, United States
| | - Karen I Winey
- Department of Materials Science and Engineering, University of Pennsylvania, 3231 Walnut Street, Philadelphia, Pennsylvania 19104, United States
| | - Shu Yang
- Department of Materials Science and Engineering, University of Pennsylvania, 3231 Walnut Street, Philadelphia, Pennsylvania 19104, United States
| |
Collapse
|
6
|
Fang J, Zhuang Y, Liu K, Chen Z, Liu Z, Kong T, Xu J, Qi C. A Shift from Efficiency to Adaptability: Recent Progress in Biomimetic Interactive Soft Robotics in Wet Environments. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2022; 9:e2104347. [PMID: 35072360 PMCID: PMC8922102 DOI: 10.1002/advs.202104347] [Citation(s) in RCA: 14] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/29/2021] [Revised: 11/30/2021] [Indexed: 05/07/2023]
Abstract
Research field of soft robotics develops exponentially since it opens up many imaginations, such as human-interactive robot, wearable robots, and transformable robots in unpredictable environments. Wet environments such as sea and in vivo represent dynamic and unstructured environments that adaptive soft robots can reach their potentials. Recent progresses in soft hybridized robotics performing tasks underwater herald a diversity of interactive soft robotics in wet environments. Here, the development of soft robots in wet environments is reviewed. The authors recapitulate biomimetic inspirations, recent advances in soft matter materials, representative fabrication techniques, system integration, and exemplary functions for underwater soft robots. The authors consider the key challenges the field faces in engineering material, software, and hardware that can bring highly intelligent soft robots into real world.
Collapse
Affiliation(s)
- Jielun Fang
- College of Mechatronics and Control EngineeringShenzhen UniversityShenzhen518000China
| | - Yanfeng Zhuang
- Department of Biomedical EngineeringSchool of MedicineShenzhen UniversityShenzhenGuangdong518000China
| | - Kailang Liu
- College of Mechatronics and Control EngineeringShenzhen UniversityShenzhen518000China
| | - Zhuo Chen
- The State Key Laboratory of Chemical EngineeringDepartment of Chemical EngineeringTsinghua UniversityBeijing100084China
| | - Zhou Liu
- College of Chemistry and Environmental EngineeringShenzhen UniversityShenzhenGuangdong518000China
| | - Tiantian Kong
- Department of Biomedical EngineeringSchool of MedicineShenzhen UniversityShenzhenGuangdong518000China
| | - Jianhong Xu
- The State Key Laboratory of Chemical EngineeringDepartment of Chemical EngineeringTsinghua UniversityBeijing100084China
| | - Cheng Qi
- College of Mechatronics and Control EngineeringShenzhen UniversityShenzhen518000China
| |
Collapse
|
7
|
Abstract
Photoactuators have attracted significant interest for soft robot and gripper applications, yet most of them rely on free-space illumination, which requires a line-of-site low-loss optical path. While waveguide photoactuators can overcome this limitation, their actuating performances are fundamentally restricted by the nature of standard optical fibres. Herein, we demonstrated miniature photoactuators by embedding optical fibre taper in a polydimethylsiloxane/Au nanorod-graphene oxide photothermal film. The special geometric features of the taper endow the designed photoactuator with microscale active layer thickness, high energy density and optical coupling efficiency. Hence, our photoactuator show large bending angles (>270°), fast response (1.8 s for 180° bending), and low energy consumption (<0.55 mW/°), significantly exceeding the performance of state-of-the-art waveguide photoactuators. As a proof-of-concept study, one-arm and two-arm photoactuator-based soft grippers are demonstrated for capturing/moving small objects, which is challenging for free-space light-driven photoactuators. Despite promising devices, waveguide photoactuators actuating performances have been fundamentally restricted by the nature of standard optical fibres. To overcome these challenges, authors propose an optical fibre taper-enabled waveguide photoactuator and show enhanced performance.
Collapse
|
8
|
Light-Driven Linear Inchworm Motor Based on Liquid Crystal Elastomer Actuators Fabricated with Rubbing Overwriting. MATERIALS 2021; 14:ma14216688. [PMID: 34772214 PMCID: PMC8587320 DOI: 10.3390/ma14216688] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 09/28/2021] [Revised: 10/27/2021] [Accepted: 11/03/2021] [Indexed: 11/23/2022]
Abstract
Linear displacement is used for positioning and scanning, e.g., in robotics at different scales or in scientific instrumentation. Most linear motors are either powered by rotary drives or are driven directly by pressure, electromagnetic forces or a shape change in a medium, such as piezoelectrics or shape-memory materials. Here, we present a centimeter-scale light-powered linear inchworm motor, driven by two liquid crystal elastomer (LCE) accordion-like actuators. The rubbing overwriting technique was used to fabricate the LCE actuators, made of elastomer film with patterned alignment. In the linear motor, a scanned green laser beam induces a sequence of travelling deformations in a pair of actuators that move a gripper, which couples to a shaft via friction moving it with an average speed in the order of millimeters per second. The prototype linear motor demonstrates how LCE light-driven actuators with a limited stroke can be used to drive more complex mechanisms, where large displacements can be achieved, defined only by the technical constrains (the shaft length in our case), and not by the limited strain of the material. Inchworm motors driven by LCE actuators may be scaled down to sub-millimeter size and can be used in applications where remote control and power supply with light, either delivered in free space beams or via fibers, is an advantage.
Collapse
|
9
|
He Q, Wang Z, Wang Y, Wang Z, Li C, Annapooranan R, Zeng J, Chen R, Cai S. Electrospun liquid crystal elastomer microfiber actuator. Sci Robot 2021; 6:6/57/eabi9704. [PMID: 34433656 DOI: 10.1126/scirobotics.abi9704] [Citation(s) in RCA: 98] [Impact Index Per Article: 32.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/12/2021] [Accepted: 07/29/2021] [Indexed: 12/30/2022]
Abstract
Fibers capable of generating axial contraction are commonly seen in nature and engineering applications. Despite the broad applications of fiber actuators, it is still very challenging to fabricate fiber actuators with combined large actuation strain, fast response speed, and high power density. Here, we report the fabrication of a liquid crystal elastomer (LCE) microfiber actuators using a facile electrospinning technique. Owing to the extremely small size of the LCE microfibers, they can generate large actuation strain (~60 percent) with a fast response speed (<0.2 second) and a high power density (400 watts per kilogram), resulting from the nematic-isotropic phase transition of liquid crystal mesogens. Moreover, no performance degradation is detected in the LCE microfibers after 106 cycles of loading and unloading with the maximum strain of 20 percent at high temperature (90 degree Celsius). The small diameter of the LCE microfiber also results in a self-oscillatory behavior in a steady temperature field. In addition, with a polydopamine coating layer, the actuation of the electrospun LCE microfiber can be precisely and remotely controlled by a near-infrared laser through photothermal effect. Using the electrospun LCE microfiber actuator, we have successfully constructed a microtweezer, a microrobot, and a light-powered microfluidic pump.
Collapse
Affiliation(s)
- Qiguang He
- Department of Mechanical and Aerospace Engineering, University of California, San Diego, La Jolla, CA 92093, USA
| | - Zhijian Wang
- Department of Mechanical and Aerospace Engineering, University of California, San Diego, La Jolla, CA 92093, USA
| | - Yang Wang
- Materials Science and Engineering Program, University of California, San Diego, La Jolla, CA 92093, USA
| | - Zijun Wang
- Materials Science and Engineering Program, University of California, San Diego, La Jolla, CA 92093, USA
| | - Chenghai Li
- Department of Mechanical and Aerospace Engineering, University of California, San Diego, La Jolla, CA 92093, USA
| | - Raja Annapooranan
- Materials Science and Engineering Program, University of California, San Diego, La Jolla, CA 92093, USA
| | - Jian Zeng
- Department of Mechanical and Aerospace Engineering, University of California, San Diego, La Jolla, CA 92093, USA
| | - Renkun Chen
- Department of Mechanical and Aerospace Engineering, University of California, San Diego, La Jolla, CA 92093, USA.,Materials Science and Engineering Program, University of California, San Diego, La Jolla, CA 92093, USA
| | - Shengqiang Cai
- Department of Mechanical and Aerospace Engineering, University of California, San Diego, La Jolla, CA 92093, USA. .,Materials Science and Engineering Program, University of California, San Diego, La Jolla, CA 92093, USA
| |
Collapse
|
10
|
Abstract
Abstract
In the past few decades, robotics research has witnessed an increasingly high interest in miniaturized, intelligent, and integrated robots. The imperative component of a robot is the actuator that determines its performance. Although traditional rigid drives such as motors and gas engines have shown great prevalence in most macroscale circumstances, the reduction of these drives to the millimeter or even lower scale results in a significant increase in manufacturing difficulty accompanied by a remarkable performance decline. Biohybrid robots driven by living cells can be a potential solution to overcome these drawbacks by benefiting from the intrinsic microscale self-assembly of living tissues and high energy efficiency, which, among other unprecedented properties, also feature flexibility, self-repair, and even multiple degrees of freedom. This paper systematically reviews the development of biohybrid robots. First, the development of biological flexible drivers is introduced while emphasizing on their advantages over traditional drivers. Second, up-to-date works regarding biohybrid robots are reviewed in detail from three aspects: biological driving sources, actuator materials, and structures with associated control methodologies. Finally, the potential future applications and major challenges of biohybrid robots are explored.
Graphic abstract
Collapse
|
11
|
Zhou L, Ren L, Chen Y, Niu S, Han Z, Ren L. Bio-Inspired Soft Grippers Based on Impactive Gripping. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2021; 8:2002017. [PMID: 33977041 PMCID: PMC8097330 DOI: 10.1002/advs.202002017] [Citation(s) in RCA: 20] [Impact Index Per Article: 6.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/28/2020] [Revised: 12/17/2020] [Indexed: 05/23/2023]
Abstract
Grasping and manipulation are fundamental ways for many creatures to interact with their environments. Different morphologies and grasping methods of "grippers" are highly evolved to adapt to harsh survival conditions. For example, human hands and bird feet are composed of rigid frames and soft joints. Compared with human hands, some plants like Drosera do not have rigid frames, so they can bend at arbitrary points of the body to capture their prey. Furthermore, many muscular hydrostat animals and plant tendrils can implement more complex twisting motions in 3D space. Recently, inspired by the flexible grasping methods present in nature, increasingly more bio-inspired soft grippers have been fabricated with compliant and soft materials. Based on this, the present review focuses on the recent research progress of bio-inspired soft grippers based on impactive gripping. According to their types of movement and a classification model inspired by biological "grippers", soft grippers are classified into three types, namely, non-continuum bending-type grippers, continuum bending-type grippers, and continuum twisting-type grippers. An exhaustive and updated analysis of each type of gripper is provided. Moreover, this review offers an overview of the different stiffness-controllable strategies developed in recent years.
Collapse
Affiliation(s)
- Liang Zhou
- Key Laboratory of Bionic EngineeringMinistry of EducationJilin UniversityChangchunJilin130022P. R. China
| | - Lili Ren
- Key Laboratory of Bionic EngineeringMinistry of EducationJilin UniversityChangchunJilin130022P. R. China
| | - You Chen
- Key Laboratory of Bionic EngineeringMinistry of EducationJilin UniversityChangchunJilin130022P. R. China
| | - Shichao Niu
- Key Laboratory of Bionic EngineeringMinistry of EducationJilin UniversityChangchunJilin130022P. R. China
| | - Zhiwu Han
- Key Laboratory of Bionic EngineeringMinistry of EducationJilin UniversityChangchunJilin130022P. R. China
| | - Luquan Ren
- Key Laboratory of Bionic EngineeringMinistry of EducationJilin UniversityChangchunJilin130022P. R. China
| |
Collapse
|