Toward Rapid-Charging Sodium-Ion Batteries using Hybrid-Phase Molybdenum Sulfide Selenide-Based Anodes

Heterogeneous engineering and carbon confinement strategy to synergistically boost the sodium storage performance of transition metal selenides

Transition metal selenides (TMSs) stand out as a promising anode material for sodium-ion batteries (SIBs) owing to their natural resources and exceptional sodium storage capacity. Despite these advantages, their practical application faces challenges, such as poor electronic conductivity, sluggish reaction kinetics and severe agglomeration during electrochemical reactions, hindering their effective utilization. Herein, the dual-carbon-confined CoSe2/FeSe2@NC@C nanocubes with heterogeneous structure are synthesized using ZIF-67 as the template by ion exchange, resorcin-formaldehyde (RF) coating, and subsequent in situ carbonization and selenidation. The N-doped porous carbon promotes rapid electrolyte penetration and minimizes the agglomeration of active materials during charging and discharging, while the RF-derived carbon framework reduces the cycling stress and keeps the integrity of the material structure. More importantly, the built-in electric field at the heterogeneous boundary layer drives electron redistribution, optimizing the electronic structure and enhancing the reaction kinetics of the anode material. Based on this, the nanocubes of CoSe2/FeSe2@NC@C exhibits superb sodium storage performance, delivering a high discharge capacity of 512.6 mA h g-1 at 0.5 A g-1 after 150 cycles and giving a discharge capacity of 298.2 mA h g-1 at 10 A g-1 with a CE close to 100.0 % even after 1000 cycles. This study proposes a viable method to synthesize advanced anodes for SIBs by a synergy effect of heterogeneous interfacial engineering and a carbon confinement strategy.

Synergistically Coupling Atomic-Level Defect-Manipulation and Nanoscopic-Level Interfacial Engineering Enables Fast and Durable Sodium Storage

Through inducing interlayer anionic ligands and functionally modifying conductive carbon-skeleton on the transition metal chalcogenides (TMCs) parent to achieve atomic-level defect-manipulation and nanoscopic-level architecture design is of great significance, which can broaden interlayer distance, optimize electronic structure, and mitigate structural deformation to endow high-efficiency battery performance of TMCs. Herein, an intriguing 3D biconcave hollow-tyre-like anode constituted by carbon-packaged defective-rich SnSSe nanosheet grafting onto Aspergillus niger spores-derived hollow-carbon (ANDC@SnSSe@C) is reported. Systematically experimental investigations and theoretical analyses forcefully demonstrate the existence of anion Se ligand and outer-carbon all-around encapsulation on the ANDC@SnSSe@C can effectively yield abundant structural defects and Na+-reactivity sites, accelerate rapid ion migration, widen interlayer spacing, as well as relieve volume expansion, thus further resolving the critical issues throughout the charge-discharge processes. As anticipated, as-fabricated ANDC@SnSSe@C anode contributes extraordinary reversible capacity, wonderful cyclic lifespan with 83.4% capacity retention over 2000 cycles at 20.0 A g-1, and exceptional rate capability. A series of correlated kinetic investigations and ex situ characterizations deeply reveal the underlying springheads for the ion-transport kinetics, as well as synthetically elucidate phase-transformation mechanism of the ANDC@SnSSe@C. Furthermore, the ANDC@SnSSe@C-based sodium ion full cell and hybrid capacitor offer high-capacity contribution and remarkable energy-density output, indicative of its great practicability.

Molecular Intercalation Enables Phase Transition of MoSe2 for Durable Na-Ion Storage

1T-MoSe2 is recognized as a promising anode material for sodium-ion batteries, thanks to its excellent electrical conductivity and large interlayer distance. However, its inherent thermodynamic instability often presents unparalleled challenges in phase control and stabilization. Here, a molecular intercalation strategy is developed to synthesize thermally stable 1T-rich MoSe2, covalently bonded to an intercalated carbon layer (1TR/2H-MoSe2@C). Density functional theory calculations uncover that the introduced ethylene glycol molecules not only serve as electron donors, inducing a reorganization of Mo 4d orbitals, but also as sacrificial guest materials that generate a conductive carbon layer. Furthermore, the C─Se/C─O─Mo bonds encourage strong interfacial electronic coupling, and the carbon layer prevents the restacking of MoSe2, regulating the maximum 1T phase to an impressive 80.3%. Consequently, the 1TR/2H-MoSe2@C exhibits an extraordinary rate capacity of 326 mAh g-1 at 5 A g-1 and maintains a long-term cycle stability up to 1500 cycles, with a capacity of 365 mAh g-1 at 2 A g-1. Additionally, the full cell delivers an appealing energy output of 194 Wh kg-1 at 208 W kg-1, with a capacity retention of 87.3% over 200 cycles. These findings contribute valuable insights toward the development of innovative transition metal dichalcogenides for next-generation energy storage technologies.

A Fast-Charge Graphite Anode with a Li-Ion-Conductive, Electron/Solvent-Repelling Interface

Graphite has been serving as the key anode material of rechargeable Li-ion batteries, yet is difficultly charged within a quarter hour while maintaining stable electrochemistry. In addition to a defective edge structure that prevents fast Li-ion entry, the high-rate performance of graphite could be hampered by co-intercalation and parasitic reduction of solvent molecules at anode/electrolyte interface. Conventional surface modification by pitch-derived carbon barely isolates the solvent and electrons, and usually lead to inadequate rate capability to meet practical fast-charge requirements. Here we show that, by applying a MoOx-MoNx layer onto graphite surface, the interface allows fast Li-ion diffusion yet blocks solvent access and electron leakage. By regulating interfacial mass and charge transfer, the modified graphite anode delivers a reversible capacity of 340.3 mAh g-1 after 4000 cycles at 6 C, showing promises in building 10-min-rechargeable batteries with a long operation life.

Molecular modulation strategies for two-dimensional transition metal dichalcogenide-based high-performance electrodes for metal-ion batteries

In the past few decades, great efforts have been made to develop advanced transition metal dichalcogenide (TMD) materials as metal-ion battery electrodes. However, due to existing conversion reactions, they still suffer from structural aggregation and restacking, unsatisfactory cycling reversibility, and limited ion storage dynamics during electrochemical cycling. To address these issues, extensive research has focused on molecular modulation strategies to optimize the physical and chemical properties of TMDs, including phase engineering, defect engineering, interlayer spacing expansion, heteroatom doping, alloy engineering, and bond modulation. A timely summary of these strategies can help deepen the understanding of their basic mechanisms and serve as a reference for future research. This review provides a comprehensive summary of recent advances in molecular modulation strategies for TMDs. A series of challenges and opportunities in the research field are also outlined. The basic mechanisms of different modulation strategies and their specific influences on the electrochemical performance of TMDs are highlighted.

Unlocking the Design Paradigm of In-Plane Heterojunction with Built-in Bifunctional Anion Vacancy for Unexpectedly Fast Sodium Storage

Transition metal chalcogenide (TMD) electrodes in sodium-ion batteries exhibit intrinsic shortcomings such as sluggish reaction kinetics, unstable conversion thermodynamics, and substantial volumetric strain effects, which lead to electrochemical failure. This report unlocks a design paradigm of VSe2- x /C in-plane heterojunction with built-in anion vacancy, achieved through an in situ functionalization and self-limited growth approach. Theoretical and experimental investigations reveal the bifunctional role of the Se vacancy in enhancing the ion diffusion kinetics and the structural thermodynamics of Nax VSe2 active phases. Moreover, this in-plane heterostructure facilitates complete face contact between the two components and tight interfacial conductive contact between the conversion phases, resulting in enhanced reaction reversibility. The VSe2- x /C heterojunction electrode exhibits remarkable sodium-ion storage performance, retaining specific capacities of 448.7 and 424.9 mAh g-1 after 1000 cycles at current densities of 5 and 10 A g-1 , respectively. Moreover, it exhibits a high specific capacity of 353.1 mAh g-1 even under the demanding condition of 100 A g-1 , surpassing most previous achievements. The proposed strategy can be extended to other V5 S8- x and V2 O5- x -based heterojunctions, marking a conceptual breakthrough in advanced electrode design for constructing high-performance sodium-ion batteries.

Design of Ion Channel Confined Binary Metal Cu-Fe Selenides for All-Climate, High-Capacity Sodium Ion Batteries

Exploring special anode materials with high capacity, stable structure, and extreme temperature feasibility remains a great challenge in secondary sodium based energy systems. Here, a bimetallic Cu-Fe selenide nanosheet with refined nanostructure providing confined internal ion transport channels are reported, in which the structure improves the pseudocapacitance and reduces the charge transfer resistance for making a significant contribution to accelerating the reaction dynamics. The CuFeSe2 nanosheets have a high initial specific capacity of 480.4 mAh g-1 at 0.25 A g-1 , showing impressively excellent rate performance and ultralong cycling life over 1000 cycles with 261.1 mAh g-1 at 2.5 A g-1 . Meanwhile, it exhibits a good sodium storage performance at extreme temperatures from -20 °C to 50 °C, supporting at least 500 cycles. Besides, the CuFeSe2 ||Na3 V2 (PO4 )3 /C full cell delivers a high specific capacity of 168.5 mAh g-1 at 0.5 A g-1 and excellent feasibility for over 600 cycles long cycling. Additionally, the Na+ storage mechanisms are further revealed by ex situ X-ray diffraction (XRD) and in situ transmission electron microscopy (TEM) techniques. A feasible channelized structural design strategy is provided that inspires new instruction into the development of novel materials with high structural stability and low volume expansion rate toward the application of other secondary batteries.

2D Amorphous Iron Selenide Sulfide Nanosheets for Stable and Rapid Sodium-Ion Storage

Sodium ion batteries (SIBs) suffer from large electrode volume change and sluggish redox kinetics for the relatively large ionic radius of sodium ions, raising a significant challenge to improve their long-term cyclability and rate capacity. Here, it is proposed to apply 2D amorphous iron selenide sulfide nanosheets (a-FeSeS NSs) as an anode material for SIBs and demonstrate that they exhibit remarkable rate capability of 528.7 mAh g-1 at 1 A g-1 and long-life cycle (10 000 cycles) performance (300.4 mAh g-1 ). This performance is much more superior to that of the previously reported Fe-based anode materials, which is attributed to their amorphous structure that alleviates volume expansion of electrode, 2D nature that facilitates electrons/ions transfer, and the S/Se double anions that offer more reaction sites and stabilize the amorphous structure. Such a 2D amorphous strategy provides a fertile platform for structural engineering of other electrode materials, making a more secure energy prospect closer to a reality.

High-Performance Alkali Metal Ion Storage in Bi2Se3 Enabled by Suppression of Polyselenide Shuttling Through Intrinsic Sb-Substitution Engineering

Bismuth selenide holds great promise as a kind of conversion-alloying-type anode material for alkali metal ion storage because of its layered structure with large interlayer spacing and high theoretical specific capacity. Nonetheless, its commercial development has been significantly hammered by the poor kinetics, severe pulverization, and polyselenide shuttle during the charge/discharge process. Herein, Sb-substitution and carbon encapsulation strategies are simultaneously employed to synthesize Sb_xBi_2-xSe₃ nanoparticles decorated on Ti₃C₂T_x MXene with encapsulation of N-doped carbon (Sb_xBi_2-xSe₃/MX⊂NC) as anodes for alkali metal ion storage. The superb electrochemical performances could be assigned to the cationic displacement of Sb³⁺ that effectively inhibits the shuttling effect of soluble polyselenides and the confinement engineering that alleviates the volume change during the sodiation/desodiation process. When used as anodes for sodium- and lithium-ion batteries, the Sb_0.4Bi_1.6Se₃/MX⊂NC composite exhibits superior electrochemical performances. This work offers valuable guidance to suppress the shuttling of polyselenides/polysulfides in high-performance alkali metal ion batteries with conversion/alloying-type transition metal sulfide/selenide anode materials.

Synergistically boosting reaction kinetics and suppressing polyselenide shuttle effect by Ti3C2Tx/Sb2Se3 film anode in high-performance sodium-ion batteries

Antimony selenide (Sb₂Se₃), with rich resources and high electrochemical activity, including in conversion and alloying reactions, has been regarded as an ideal candidate anode material for sodium-ion batteries. However, the severe volume expansion, sluggish kinetics, and polyselenide shuttle of the Sb₂Se₃-based anode lead to serious pulverization at high current density, restricting its industrialization. Herein, a unique structure of Sb₂Se₃ nanowires uniformly anchored between Ti₃C₂T_x (MXene) nanosheets was prepared by the electrostatic self-assembly method. The MXene can impede the volume expansion of Sb₂Se₃ nanowires in the sodiation process. Moreover, the Sb₂Se₃ nanowires can reduce the restacking of Ti₃C₂T_x nanosheets and enhance electrolyte accessibility. Furthermore, density functional theory calculations confirm the increased reaction kinetics and better sodium storage capability through the composite of Ti₃C₂T_x with Sb₂Se₃ and the high adsorption capability of Ti₃C₂T_x to polyselenides. Therefore, the resultant Sb₂Se₃/Ti₃C₂T_x anodes show high rate capability (369.4 mAh/g at 5 A/g) and cycling performance (568.9 and 304.1 mAh/g at 0.1 A/g after 100 cycles and at 1.0 A/g after 500 cycles). More importantly, the full sodium-ion batteries using the Sb₂Se₃/Ti₃C₂T_x anode and Na₃V₂(PO₄)₃/carbon cathode exhibit high energy/power densities and outstanding cycle performance.

Anion Defects Engineering of Ternary Nb-Based Chalcogenide Anodes Toward High-Performance Sodium-Based Dual-Ion Batteries

Highlights

We developed an efficient and extensible strategy to produce the single-phase ternary NbSSe nanohybrids with defect-enrich microstructure. The anionic-Se doping play a key role in effectively modulating the electronic structure and surface chemistry of NbS2 phase, including the increased interlayers distance (0.65 nm), the enhanced intrinsic electrical conductivity (3.23 × 103 S m-1) and extra electroactive defect sites. The NbSSe/NC composite as anode exhibits rapid Na+ diffusion kinetics and increased capacitance behavior for Na+ storage, resulting in high reversible capacity and excellent cycling stability.

Abstract

Sodium-based dual-ion batteries (SDIBs) have gained tremendous attention due to their virtues of high operating voltage and low cost, yet it remains a tough challenge for the development of ideal anode material of SDIBs featuring with high kinetics and long durability. Herein, we report the design and fabrication of N-doped carbon film-modified niobium sulfur–selenium (NbSSe/NC) nanosheets architecture, which holds favorable merits for Na+ storage of enlarged interlayer space, improved electrical conductivity, as well as enhanced reaction reversibility, endowing it with high capacity, high-rate capability and high cycling stability. The combined electrochemical studies with density functional theory calculation reveal that the enriched defects in such nanosheets architecture can benefit for facilitating charge transfer and Na+ adsorption to speed the electrochemical kinetics. The NbSSe/NC composites are studied as the anode of a full SDIBs by pairing the expanded graphite as cathode, which shows an impressively cyclic durability with negligible capacity attenuation over 1000 cycles at 0.5 A g−1, as well as an outstanding energy density of 230.6 Wh kg−1 based on the total mass of anode and cathode.

Supplementary Information

The online version contains supplementary material available at 10.1007/s40820-023-01070-0.

Dual Mechanism for Sodium based Energy Storage

A dual-mechanism energy storage strategy is proposed, involving the electrochemical process of sodium ion battery (SIB) and sodium metal battery (SMB). This strategy is expected to achieve a higher capacity than SIB, and obtain dendrite-free growth of SMB with a well-designed anode. Here, self-constructed bismuth with "sodiophilic" framework and rapid ion transmission characteristics is employed as the sodium host (anode) integrating alloy/de-alloy and plating/stripping process that suppresses the dendrite growth and overcomes the limited capacity of traditional anode. Benefited from this, the capacity (capacity contributed by alloy and plating of sodium in total) of 2000 mAh g^-1 can be reached, which can retain up to 800 h at 1 A g^-1 . Also, the capacity of 3100 mAh g^-1 can be achieved that is ≈7.7 times than that of alloyed-bismuth (Bi). This work proposes a dual-mechanism strategy to tackle the dilemma of high-performance sodium (Na) storage devices, which opens a new avenue for the development of next-generation energy storage device.

Phase Transition Induced via the Template Enabling Cocoon-like MoS2 an Exceptionally Electromagnetic Absorber

Structural engineering via the template method is efficient for micro-nano assembling. However, only structural design and lack of composition control restrict their advanced application. To overcome this issue, applying a template to simultaneously realize the structural design and fine component control is highly desired, which has been ignored. In this study, a spinel-shaped MoS₂ heterostructure with controlled phase ratios of 1H and 2H phase is developed using the AlOOH template method. This work demonstrates that the MoS₂ phase transition mechanism from 2H to 1T is substantially attributed to the close exposed crystal's surface and approximately accordant surface energy. The superiority and additional proof are provided based on density-functional theory simulation, transmission electron microscope holography, etc. With an effective absorptance region of 6.3 GHz under a thickness of 1.4 mm, the reported samples present outstanding microwave absorption capacity. This is attributed to the beneficial coupled effect between the well-designed structure and phase regulation. This work offers valuable insights into structural engineering and component regulation template methods.

Strain-regulated Gibbs free energy enables reversible redox chemistry of chalcogenides for sodium ion batteries

Manipulating the reversible redox chemistry of transition metal dichalcogenides for energy storage often faces great challenges as it is difficult to regulate the discharged products directly. Herein we report that tensile-strained MoSe₂ (TS-MoSe₂) can act as a host to transfer its strain to corresponding discharged product Mo, thus contributing to the regulation of Gibbs free energy change (ΔG) and enabling a reversible sodium storage mechanism. The inherited strain results in lattice distortion of Mo, which adjusts the d-band center upshifted closer to the Fermi level to enhance the adsorbability of Na₂Se, thereby leading to a decreased ΔG of the redox chemistry between Mo/Na₂Se and MoSe₂. Ex situ and in situ experiments revealed that, unlike the unstrained MoSe₂, TS-MoSe₂ shows a highly reversible sodium storage, along with an evidently improved reaction kinetics. This work sheds light on the study on electrochemical energy storage mechanism of other electrode materials.

Manipulating the redox chemistry of transition metal dichalcogenides still faces challenges. Here the authors report that tensile-strained MoSe2 can pass on the strain to its sodiated product Mo, and thus regulate the Gibbs free energy in the charging process to enable the reversible sodium storage.

Ammonium-Modified Synthesis of Vanadium Sulfide Nanosheet Assemblies toward High Sodium Storage

The weak van der Waals interactions of the one-dimensional (1D) chainlike VS₄ crystal structure can enable fast charge-transfer kinetics in metal ion batteries, but its potential has been rarely exploited in depth. Herein, a thermodynamics-driven morphology manipulation strategy is reported to tailor VS₄ nanosheets into 3D hierarchical self-assembled architectures including nanospheres, hollow nanospheres, and nanoflowers. The ultrathin VS₄ nanosheets are generated via 2D anisotropic growth by the strong driving force of coordination interaction from ammonium ions under microwave irradiation and then evolve into 3D sheet-assembled configurations by adjusting the thermodynamic factors of temperature and reaction time. The as-synthesized VS₄ nanomaterials present good electrochemical performances as the anode materials for sodium-ion batteries. In particular, the hollow VS₄ nanospheres show a specific capacity of 1226.7 mAh g^-1 at 200 mA g^-1 current density after 100 cycles. The hierarchical nanostructures with large specific surface area and structural stability can overcome the difficulty of sodium ions embedding into the bulk material interior and provide more reactive materials at the same material mass loading compared with other morphologies. Both experiment and DFT calculations suggest that VS₄ nanosheets reduce reaction kinetic impediment of sodium ion in battery operating. This work demonstrates a way of the morphological design of 2D VS₄ nanosheets and application in sodium ion storage.

Enabling Reversible Reaction by Uniform Distribution of Heterogeneous Intermediates on Defect-Rich SnSSe/C Layered Heterostructure for Ultralong-Cycling Sodium Storage

2D layered Sn-based materials have attracted enormous attention due to their remarkable performance in sodium-ion batteries. Nevertheless, this promising candidate involves a complex Na⁺ -storage process with multistep conversion-alloying reactions, which induces the uneven dispersion of heterogeneous intermediate accompanied by severe agglomeration of metallic Sn⁰ , inescapably resulting in poor reaction reversibility with sluggish rate capability and inferior cyclic lifespan. Herein, a delicately layered heterostructure SnSSe/C consisting of defect-rich SnSSe and graphene is designed and successfully achieved via a facile hydrothermal process. The equal anionic substitution of Se in SnSSe crystal can trigger numerous defects, which can not only facilitate Na⁺ diffusion but also accelerate the nucleation process by inducing quantum-dot-level uniform distribution of heterogeneous intermediates, Na₂ Se/Na₂ S and Sn⁰ . Concurrently, in situ formed uniform Na₂ Se/Na₂ S grain boundaries confined by this unique layered heterostructure may effectively suppress the agglomeration of metallic Sn⁰ nanograins and boost the reversibility of conversion-alloying reaction. As a result, the SnSSe/C displays significant improvement in Na-storage performance, in terms of remarkable rate capability and ultralong cycling lifespan. This work, focusing on controlling intermediate distribution, provides an effective strategy to boost reaction reversibility, which can be wildly employed in conversion-based electrodes for energy storage regions.

Vacancy-Rich MoSSe with Sulfiphilicity-Lithiophilicity Dual Function for Kinetics-Enhanced and Dendrite-Free Li-S Batteries

The sluggish redox kinetics of sulfur and the uncontrollable growth of lithium dendrites are two main challenges that impede the practical applications of lithium-sulfur (Li-S) batteries. In this study, a multifunctional host with vacancy-rich MoSSe vertically grown on reduced graphene oxide aerogels (MoSSe/rGO) is designed as the host material for both sulfur and lithium. The embedding of Se into a MoS₂ lattice is introduced to improve the inherent conductivity and generate abundant anion vacancies to endow the 3D conductive graphene based aerogels with specific sulfiphilicity-lithiophilicity. As a result, the assembled Li-S batteries based on MoSSe/rGO exhibit greatly improved capacity and cycling stability and can be operated under a lean electrolyte (4.8 μL mg^-1) and a high sulfur loading (6.5 mg cm^-2), achieving a high energy density. This study presents a unique method to unlock the catalysis capability and improve the inherent lithiophilicity by heteroatom doping and defect chemistry for kinetics-enhanced and dendrite-free Li-S batteries.

In Situ Growth of CoS2/ZnS Nanoparticles on Graphene Sheets as an Ultralong Cycling Stability Anode for Potassium Ion Storage

Metal sulfides are promising anodes for potassium-ion batteries (PIBs) due to their high theoretical capacity and abundant active sites; however, their intrinsic low conductivity and poor cycling stability hampered their practical applications. Given this, the rational design of hybrid structures with high stability and fast charge transfer is a critical approach. Herein, CoS₂/ZnS@rGO hybrid nanocomposites were demonstrated with stable cubic phases. The synergistic effect of the obtained bimetallic sulfide nanoparticles and highly conductive 2D rGO nanosheets facilitated excellent long-term cyclability for potassium ion storage. Such hybrid nanocomposites delivered remarkable ultrastable cycling performances in PIBs of 159, 106, and 80 mA h g^-1 at 1, 1.5, and 2 A g^-1 after 1800, 2100, and 3000 cycles, respectively. Moreover, the full-cell configuration with a perylene tetracarboxylic dianhydride organic cathode (CoS₂/ZnS@rGO∥PTCDA) exhibited a better electrochemical performance. Besides, when the CoS₂/ZnS@rGO nanocomposites were applied as an anode for sodium-ion batteries, the electrode demonstrated a reversible charge capacity of 259 mA h g^-1 after 600 cycles at 2 A g^-1. In situ X-ray diffraction and ex situ high-resolution transmission electron microscopy characterizations further confirmed the conversion reactions of CoS₂/ZnS during insertion/desertion processes. Our synthesis strategy is also a general route to other bimetallic sulfide hybrid nanocomposites. This strategy opens up a new roadmap for exploring hybrid nanocomposites with feasible phase engineering for achieving excellent electrochemical performances in energy storage applications.

3D V2O5-MoS2/rGO nanocomposites with enhanced peroxidase mimicking activity for sensitive colorimetric determination of H2O2 and glucose

In this work, we reported a novel nanozyme (3D V₂O₅-MoS₂/rGO) by decorating MoS₂ nano-flowers and V₂O₅ nanoparticles on reduced graphene oxide (rGO). The 3D V₂O₅-MoS₂/rGO nanocomposites exhibited intrinsic peroxidase mimicking activity and catalyzed the oxidation of 3, 3', 5, 5'-tetramethylbenzidine (TMB) to produce a blue colored product in the presence of H₂O₂. Compared with horseradish peroxidase (HRP), 3D V₂O₅-MoS₂/rGO nanocomposites displayed high catalytic velocity (V_max) and affinity (K_m) for substrates (H₂O₂ and TMB). The study of the catalytic mechanism showed that the reduction of V⁵⁺ and the oxidation of S^2- in the 3D V₂O₅-MoS₂/rGO nanocomposites accelerate electron transfer between H₂O₂ and TMB, which enhanced the peroxidase mimicking activity of 3D V₂O₅-MoS₂/rGO nanocomposites. The as-synthetized 3D V₂O₅-MoS₂/rGO could be used for the colorimetric detection of H₂O₂ in the range of 20.00-800.00 μM with the LOD of 12.40 μM (3σ/S). Moreover, the 3D V₂O₅-MoS₂/rGO could also be used for the detection of glucose in the range of 4.00-300.00 μM with the LOD of 3.99 μM (3σ/S). In addition, the as-synthetized novel peroxidase mimics has good applicability for sensitive colorimetric determination of glucose in human blood samples and artificial urine samples, and has broad application prospects as a multi-functional sensing platform in clinical diagnosis.

NiS1−xSex Nanoparticles Anchored on Nitrogen-Doped Reduced Graphene Oxide as Highly Stable Anode for Sodium-Ion Battery

Nickel sulfides are regarded as one of the promising anode materials for sodium-ion batteries (SIBs), but the sluggish electrodes kinetics and rapid capacity decay, caused by their intrinsic low electrical conductivity and high bulk expansion, greatly limit their practical application. To overcome these obstacles, nano-sized, selenium-doped, nickel sulfide particles, anchored on nitrogen-doped reduced graphene oxide composites (NiS1−xSex@N–rGO), are rationally synthesized. The broad Na+ diffusion channels, resulting from Se doping, as well as the short Na+ transferring path, attributed from nano-size scale of NiS1−xSex particles, endow NiS1−xSex@N–rGO composites with ultrafast storage kinetics. Moreover, strong coupled effect between the NiS1−xSex and N–rGO is beneficial to the uniform dispersion of NiS1−xSex nanoparticles, improving electrical conductivity and suppressing the volume variation in charge/discharge process. Furthermore, the cut-off discharge voltage is modulated to realize the smaller volume change during cycle process. As a result, the fabricated anode of SIBs based on NiS1−xSex@N–rGO composites exhibits a high specific capacity of 300 mAh g−1, at the current density of 1 A g−1, after 1000 cycles with almost no capacity degradation.

Hierarchical core/shell titanium dioxide/molybdenum disulfide nanosheets coupled with carbon architecture for superior lithium/sodium ion storage

The peculiar core/shell structure with abundant interfaces is favorable for Li⁺/Na⁺ storage, which can elevate the efficiency of energy storage and conversion. Herein, a unique core/shell structure composite with diverse interfaces was successfully designed and fabricated via a facile coordination reaction combined with thermal treatment. Specially, well-crystallized TiO₂ nanoparticles were encapsulated and embedded in carbon nanospheres wrapped with MoS₂ nanosheets, leading to abundant interfacial structure and boundaries. Benefitting from the synergistic effect between numerous interfaces and distinctive hierarchal core/shell structure, such a hybrid material possesses fascinating features including ultrafast ion diffusion, plentiful storage active sites and prominent electric conductivity. As a proof of concept, as-prepared samples demonstrated superior reversible lithium storage capacity and hybrid lithium-ion capacitor. What is more, when the material was acted as anode material for SIBs, the discharge capacity maintained at a high capacity of 267.2 mA h g^-1 after 1000 cycles at 2.0 A g^-1. This work highlights a convenient strategy to synthesize other hybrid materials for electrode materials of energy storage and conversion applications.

In Situ Fabrication of Cuprous Selenide Electrode via Selenization of Copper Current Collector for High-Efficiency Potassium-Ion and Sodium-Ion Storage

Selenium-based materials are considered as desirable candidates for potassium-ion and sodium-ion storage. Herein, an in situ fabrication method is developed to prepare an integrated cuprous selenide electrode by means of directly chemical selenization of the copper current collector with commercial selenium powder. Interestingly, only the electrolyte of 1 m potassium hexafluorophosphate dissolved in 1,2-dimethoxyethane with higher highest occupied molecular orbital energy and lower desolvation energy facilitates the formation of polyselenide intermediates and the further selenization of the copper current collector. Benefiting from the unique thin-film-like nanosheet morphology and the robust structural stability of the integrated electrode, the volume change and the loss of selenide species could be effectively restrained. Therefore, high performance is achieved in both potassium-ion batteries (462 mA h g-1 at 2 A g-1 for 300 cycles) and sodium-ion batteries (775 mA h g-1 at 2 A g-1 for 4000 cycles). The facile fabrication strategy paves a new direction for the design and preparation of high-performance electrodes.

Biomineralized Mesocrystal KCl Microreactor for Solid-State Synthesis of Non-Oxide Nanomaterials

Inspired by natural biomineralization, a biomineralized microreactor with a mesocrystal KCl shell (BM-KCl-MMs) is made by a facile freezing dry process, exhibiting a good availability for high-temperature solid-state synthesis of nanomaterials. Benefiting from the good thermal stability, stiffness, and mechanical strength of KCl mesocrystal shells, the employment of BM-KCl-MMs in the transition metal (TM)-S-Se system not only realizes for the first time, the production of TMS_x Se_{2- x} /C nanocomposites in air atmosphere, but also reaches a high reagent-utilization and high yield, as well as minimum wastes. More importantly, based on the soaking effect of the KCl shells, the resultant stable reaction microenvironment inside endows the microreactors with a well-controlled synthesis of nanomaterials with very even size, uniform dispersion, and novel functionalities. As one example, the as-prepared MoS_x Se_{2- x} /C composites as the electrodes of K-ion batteries and K-ion hybrid supercapacitors deliver the state of the art cycling capability of 248 mAh g^-1 at 2 A g^-1 after 5000 cycles and an 87.1% capacity retention at 5.0 A g^-1 after 20 000 cycles, respectively, demonstrating a significant potential of BM-KCl-MMs on design and synthesis of novel functional nanomaterials.

Hollow MoS2/Co nanopillars with boosted Li-ion diffusion rate and long-term cycling stability

Hollow MoS₂/Co-0.1 nanopillars were successfully synthesized by sulfurizing CoMoO₄ and subsequent acid etching, which were used as the anode material for lithium ion batteries. The introduction of suitable metal Co into MoS₂ nanopillars effectively accelerates electron/ion transport kinetics, leading to high specific capacity and superior rate capability and cycling stability.

Reduced Graphene-Oxide-Encapsulated MoS2/Carbon Nanofiber Composite Electrode for High-Performance Na-Ion Batteries

Sodium-ion batteries (SIBs) have been increasingly studied due to sodium (Na) being an inexpensive ionic resource (Na) and their battery chemistry being similar to that of current lithium-ion batteries (LIBs). However, SIBs have faced substantial challenges in developing high-performance anode materials that can reversibly store Na⁺ in the host structure. To address these challenges, molybdenum sulfide (MoS₂)-based active materials have been considered as promising anodes, owing to the two-dimensional layered structure of MoS₂ for stably (de)inserting Na⁺. Nevertheless, intrinsic issues of MoS₂—such as low electronic conductivity and the loss of active S elements after a conversion reaction—have limited the viability of MoS₂ in practical SIBs. Here, we report MoS₂ embedded in carbon nanofibers encapsulated with a reduced graphene oxide (MoS₂@CNFs@rGO) composite for SIB anodes. The MoS₂@CNFs@rGO delivered a high capacity of 345.8 mAh g⁻¹ at a current density of 100 mA g⁻¹ for 90 cycles. The CNFs and rGO were synergistically taken into account for providing rapid pathways for electrons and preventing the dissolution of S sources during repetitive conversion reactions. This work offers a new point of view to realize MoS₂-based anode materials in practical SIBs.

Vertical 2-dimensional heterostructure SnS-SnS2 with built-in electric field on rGO to accelerate charge transfer and improve the shuttle effect of polysulfides

Traditional carbon materials as sulfur hosts of Li-sulfur(Li-S) cathodes have slightly physical constraint for polysulfides, due to their no-polar property. Therefore, it is necessary to further enhance the affinity between sulfur hosts and polysulfides, and relieve the shuttle effects in the Li- S batteries. Herein, we report a novel vertical 2-dimensional (2D) p-SnS/n-SnS₂ heterostructure sheets which grown on the surface of rGO. The excellent electrochemical properties of SnS-SnS₂@rGO as Li-S cathode are ascribed to the stronger absorption effect of metal sulphides for polysulfides and the smooth trapping-diffusion-conversion effect of p-SnS/n-SnS₂ heterostructure for polysulfides. As a conductive carrier for the growth of vertical 2D p-SnS/n-SnS₂ heterostructure nanosheets, rGO can protect the steadiness and enhance the cycle stability of electrode, compared with heterostructure without rGO. In addition, the built-in electric field in the 2D p-SnS/n-SnS₂ heterostructure during the discharge/charge processes can effectively accelerate charge transfer, and the charge transfer mechanism in SnS-SnS₂ heterostructure during cycling has been investigated. At a rate capability of 2C, the designed SnS-SnS₂@rGO as Li-S cathode delivers high specific capacities of 907 mAh g^-1 and 571 mAh g^-1 after the first cycle and 500 cycles, respectively, which shown excellent cycling ability.

Co0.85Se particles encapsulated in the inner wall of nitrogen-doped carbon matrix nanotubes with rational interfacial bonds for high-performance lithium-ion batteries

Cobalt selenides based on the conversion reaction have been widely applied in lithium-ion batteries (LIBs) due to their high conductivity and high specific capacity. However, effectively suppressing the fast capacity fade caused by the irreversible Se/Co dissolution and serious volume change during the cycling process is still a challenge. Herein, a facile and efficient self-generated sacrificial template method is used to prepare Co_0.85Se nanoparticles encapsulated in the inner wall of N-doped carbon matrix nanotubes (Co_0.85Se@NCMT). In this strategy, the formation of stable Co-N/C and Se-C as well as enhancing the mechanical strength between active materials and N-doped carbon matrix nanotubes can critically affect the performance through suppressing the dissolution of Se/Co, decreasing energy band, promoting the shuttling of the ions/e^- moving and mitigating the volume expansion during the charge-discharge process, which play a key role in improving the structure stability and electrochemical performance. Besides, Co_0.85Se nanoparticles encapsulated in the robust carbon matrix inner wall can ensure good electron transfer and prevent the aggregation of nanoparticles, leading to superior electrochemical reversibility. Finally, carbon matrix nanotubes can provide sufficient space to effectively accommodate the volume changes of encapsulated Co_0.85Se nanoparticles, thereby improving the cyclic stability. Based on the above advantages, as expected, the electrochemical investigations exhibited that the Co_0.85Se@NCMT anode performs a stable reversible capacity of 462.9 mA h g^-1 at a large current density of 5 A g^-1 and a remarkable capacity retention of 99.5% after 800 cycles, suggesting its promising potential for the anode of LIBs.

Solid Solution Metal Chalcogenides for Sodium-Ion Batteries: The Recent Advances as Anodes

The sodium-ion battery (SIB) has attracted ever growing attention as a promising alternative of the lithium-ion battery (LIB). Constructing appropriate anode materials is critical for speeding up the application of SIB. This review aims at guiding anode design from the material's perspective, and specifically focusing on solid solution metal chalcogenide anode. The sodium ion storage mechanisms of a solid solution metal chalcogenide anode is overviewed on basis of the elements it is composed of, and discusses how the solid solution character alters the electrochemical performances through diffusion and surface-controlled processes. In addition, by classifying solid solution metal chalcogenide as cation and anion, their recent applications are updated, and understanding the roles of guest elements in improving the electrochemical behaviors of a solid solution metal chalcogenide is carried out. After that, discussion of possible strategies to further optimize these anode materials in the future, flowing from crystal structure design to morphology control and finally to the intimacy improvement between conductive matrix and solid solution metal chalcogenide are also provided.

A stable and ultrafast K ion storage anode based on phase-engineered MoSe2

Potassium-ion batteries (PIBs) are attracting increasing attention due to the abundance of K resources, but the sluggish kinetics and inferior cycling stability of anodes still hinder their application. Herein, we present a hybrid 1T/2H phase MoSe₂ anode, which shows noticeable pseudocapacitive response and fast kinetics for K storage. Correspondingly, superior electrochemical performances including a high reversible capacity of 440 mA h g^-1 after 100 cycles at 0.1 A g^-1 and superb rate capacity of 211 mA h g^-1 at 20.0 A g^-1 are achieved. We believe this work may shed light on the phase engineering of transition metal compounds for rapid charging PIBs.