Converting 2D Nanofiber Membranes to 3D Hierarchical Assemblies with Structural and Compositional Gradients Regulates Cell Behavior

Polycaprolactone/gelatin/ZIF-8 nanofiber membrane for advanced guided tissue regeneration in periodontal therapy

The periodontal tissue regeneration strategy based on guided tissue regeneration (GTR) membranes is an effective therapy for periodontal defects. Traditional GTR membranes, however, primarily serve as physical barriers and lack antimicrobial and osteogenic functions. Herein, we developed a multifunctional nanofiber membrane with zeolitic imidazolate framework-8 nanoparticles (ZIF-8 NPs) loaded in a hydrophilic gelatin layer. The release of Zn2+ from the ZIF-8 NPs effectively promoted bone tissue repair and simultaneously enabled GTR membranes with >99 % antibacterial efficacies against Escherichia coli and Staphylococcus aureus. Additionally, the incorporation of gelatin enhances cellular adhesion and growth. Furthermore, in vivo studies revealed significant bone regeneration, with increased trabecular number and reduced separation. Owing to its multiple functions, excellent biocompatibility and desirable mechanical properties, this membrane has considerable potential in the field of periodontal therapy.

Multi-Gradient Bone-Like Nanocomposites Induced by Strain Distribution

The heterogeneity of bones is elegantly adapted to the local strain environment, which is critical for maintaining mechanical functions. Such an adaptation enables the strong correlation between strain distributions and multiple gradients, underlying a promising pathway for creating complex gradient structures. However, this potential remains largely unexplored for the synthesis of functional gradient materials. In this work, heterogeneous bone-like nanocomposites with complex structural and compositional gradients comparable to bones are synthesized by inducing strain distributions within the polymer matrix containing amorphous calcium phosphate (ACP). Uniaxial stretching of composite films exerts the highest strain in the center, which ceases gradually toward the sides, resulting in the gradual decrease of polymer alignment and crystallinity. Simultaneously, the center with high orientation traps most ACP during stretching due to the nanoconfinement effect, which in turn promotes the formation of aligned nanofibrous structures. The sides experiencing the least strain have the smallest amounts of ACP, characteristic of porous architectures. Further crystallization of ACP produces oriented apatite nanorods in the center with a larger crystalline/amorphous ratio than the sides because of template-induced crystallization. The combination of structural and compositional gradients leads to gradient mechanical properties, and the gradient span and magnitude correlate nicely with strain distributions. Accompanying bone-like mechanical gradients, the center is less adhesive and self-healable than the sides, which allows a better recovery after a complete cutting. Our work may represent a general strategy for the synthesis of biomimetic materials with complex gradients thanks to the ubiquitous presence of strain distributions in load-bearing structures.

Tissue-engineered Bicipital Autologous Tendon Patch Enhances Massive Rotator Cuff Defect Repair in a Rabbit Infraspinatus Tendon Defect Model

BACKGROUND

Massive rotator cuff defects represent an important source of shoulder pain and functional debilitation, substantially diminishing patients' quality of life. The primary treatment of massive rotator cuff defects includes complete or partial repair and patch augmentation. However, because of the tendon's limited regenerative ability, the tendon retear risk after rotator cuff defect repair is still high. Thus, a new therapy is needed to promote tendon regeneration for repair of massive rotator cuff defects.

QUESTIONS/PURPOSES

Using an in vitro analysis, we first asked: (1) What is the biocompatibility and collagen synthesis ability of fibrin glue, and what is the cell growth of tissue-engineered bicipital tendon patches, which is comprised of fibrin glue and biceps tendon tissue particles? Then, using an in vivo animal model of full-thickness defects in the infraspinatus tendon in New Zealand White rabbits, we asked: (2) What is the potential of the tissue-engineered bicipital autologous tendon patch to promote tendon regeneration?

METHODS

In vitro experiments were conducted to assess the survival, proliferation, and collagen synthesis ability of tendon stem/progenitor cells cultured in fibrin glue. This was achieved through an assay of live/dead cell viability, cell counting kit-8 (CCK-8) assay, and Sirius red staining, respectively. The in vivo animal study was conducted using 8- to 12-week-old New Zealand White rabbits. The left shoulder of each animal was operated on, with equal numbers of males and females. There were 12 rabbits in the control group and 15 rabbits each in the gel and patch groups. Six rabbits were allocated to each of the three groups at the 1- and 3-month time points and three rabbits each were in the gel and patch groups at 2-month time point. Through an infraspinatus tendon defect model, the effectiveness of tissue-engineered bicipital autologous tendon patches (patch group) in tendon repair was assessed compared with untreated (control group) and fibrin glue (gel group) treatments in vivo. This assessment included histological evaluation of repaired tissue morphology, transmission electron microscopy (TEM) evaluation of regenerated collagen fibrils, and RNA sequencing to explore the potential mechanisms of tissue-engineered bicipital autologous tendon patches in tendon regeneration.

RESULTS

In vitro experiments demonstrated that fibrin glue enhanced the collagen synthesis ability of tendon stem/progenitor cells (0.38 ± 0.02) compared with standard cell culture alone (0.27 ± 0.02, mean difference 0.11 [95% CI 0.07 to 0.14]; p < 0.001). With prolonged cultivation, the cell growth area of tissue-engineered bicipital tendon patches showed a notable increase after culturing for 14 days (78.13% ± 3.68%) compared with 11 days (13.05% ± 8.78%, mean difference -65.08% [95% CI -77.99% to -52.15%]; p＜0.001), 7 days (2.67% ± 2.62%, mean difference -75.46% [95% CI -88.37% to -62.53%]; p＜0.001), and 1 day (0.33% ± 0.30%, mean difference -77.80% [95% CI -90.71% to -64.87%]; p＜0.001). At 3 months after transplantation, in vivo experiments revealed that compared with the control and gel groups, the patch group displayed improved repair outcomes. This was evidenced by better histological scores in the patch group (3.83 ± 2.01) compared with the gel group (10.67 ± 0.58, mean difference 6.84 [95% CI 3.67 to 10.00]; p = 0.001) and control group (10.75 ± 0.66, mean difference 6.92 [95% CI 3.75 to 10.08]; p = 0.001), and by regular alignment and larger diameters of newly formed collagen fibrils in the patch group (77.52 ± 44.41 nm) compared with the control group (53.34 ± 6.64 nm, mean difference 24.18 [95% CI 22.24 to 26.11]; p < 0.001). RNA sequencing analysis revealed that a tissue-engineered bicipital autologous tendon patch facilitated tendon regeneration by modulating the immune response, promoting collagen fibril organization, and alleviating vasoconstriction.

CONCLUSION

This animal study demonstrates that the tissue-engineered bicipital autologous tendon patch effectively modulates an immune response and collagen fibril organization, leading to the promotion of tendon regeneration.

CLINICAL RELEVANCE

The tissue-engineered bicipital autologous tendon patch represents a promising strategy for tendon regeneration, offering potential in the repair of massive rotator cuff defects during clinical rotator cuff surgery. Subsequent research could focus on large animal experiments using a tissue-engineered bicipital autologous tendon patch to explore their feasibility for clinical translation.

Adapting to the acidic environment of the NP: RADA16-PLGA (TGF-β3) induces chondrogenic differentiation of BMSCs

Aim: RADA16-PLGA composite scaffolds constructed with simultaneous loading of BMSCs and TGF-β3 and explored their ability for chondrogenic differentiation in vitro.Methods: The performance of the composite scaffolds is assessed by rheometer assay, electron microscopic structural observation and ELISA release assay. The biosafety of the composite scaffolds is assessed by cytocompatibility assay and cell migration ability. The chondrogenic differentiation ability of composite scaffolds is evaluated by Alisin blue staining, PCR and immunofluorescence staining.Results: The composite scaffold has a good ECM-like structure, the ability to control the release of TGF-β3 and good biocompatibility. More importantly, the composite scaffolds can induce the differentiation of BMSCs to chondrocytes.Conclusion: Composite scaffolds are expected to enhance the endogenous NP repair process.

Orthogonally woven 3D nanofiber scaffolds promote rapid soft tissue regeneration by enhancing bidirectional cell migration

Repairing large-area soft tissue defects caused by traumas is a major surgical challenge. Developing multifunctional scaffolds with suitable scalability and favorable cellular response is crucial for soft tissue regeneration. In this study, we developed an orthogonally woven three-dimensional (3D) nanofiber scaffold combining electrospinning, weaving, and modified gas-foaming technology. The developed orthogonally woven 3D nanofiber scaffold had a modular design and controlled fiber alignment. In vitro, the orthogonally woven 3D nanofiber scaffold exhibited adjustable mechanical properties, good cell compatibility, and easy drug loading. In vivo, for one thing, the implantation of an orthogonally woven 3D nanofiber scaffold in a full abdominal wall defect model demonstrated that extensive granulation tissue formation with enough mechanical strength could promote recovery of abdominal wall defects while reducing intestinal adhesion. Another result of diabetic wound repair experiments suggested that orthogonally woven 3D nanofiber scaffolds had a higher wound healing ratio, granulation tissue formation, collagen deposition, and re-epithelialization. Taken together, this novel orthogonally woven 3D nanofiber scaffold may provide a promising and effective approach for optimal soft tissue regeneration.

Decellularized extracellular matrix-decorated 3D nanofiber scaffolds enhance cellular responses and tissue regeneration

The use of decellularized extracellular matrix products in tissue regeneration is quite alluring yet practically challenging due to the limitations of its availability, harsh processing techniques, and host rejection. Scaffolds obtained by either incorporating extracellular matrix (ECM) material or coating the surface can resolve these challenges to some extent. However, these scaffolds lack the complex 3D network formed by proteins and growth factors observed in natural ECM. This study introduces an approach utilizing 3D nanofiber scaffolds decorated with dECM to enhance cellular responses and promote tissue regeneration. Notably, the dECM can be customized according to specific cellular requirements, offering a tailored environment for enhanced therapeutic outcomes. Two types of 3D expanded scaffolds, namely radially aligned scaffolds (RAS) and laterally expanded scaffolds (LES) fabricated by the gas-foaming expansion were utilized. To demonstrate the proof-of-concept, human dermal fibroblasts (HDFs) seeded on these scaffolds for up to 8 weeks, resulted in uniform and highly aligned cells which deposited ECM on the scaffolds. These cellular components were then removed from the scaffolds through decellularization (e.g., SDS treatment and freeze-thaw cycles). The dECM-decorated 3D expanded nanofiber scaffolds can direct and support cell alignment and proliferation along the underlying fibers upon recellularization. An in vitro inflammation assay indicates that dECM-decorated LES induces a lower immune response than dECM-decorated RAS. Further, subcutaneous implantation of dECM-decorated RAS and LES shows higher cell infiltration and angiogenesis within 7 and 14 days than RAS and LES without dECM decoration. Taken together, dECM-decorated 3D expanded nanofiber scaffolds hold great potential in tissue regeneration and tissue modeling. STATEMENT OF SIGNIFICANCE: Decellularized ECM scaffolds have attained widespread attention in biomedical applications due to their intricate 3D framework of proteins and growth factors. Mimicking such a complicated architecture is a clinical challenge. In this study, we developed natural ECM-decorated 3D electrospun nanofiber scaffolds with controlled alignments to mimic human tissue. Fibroblasts were cultured on these scaffolds for 8 weeks to deposit natural ECM and decellularized by either freeze-thawing or detergent to obtain decellularized ECM scaffolds. These scaffolds were tested in both in-vitro and in-vivo conditions. They displayed higher cellular attributes with lower immune response making them a good grafting tool in tissue regeneration.

Novel Biomaterials for Wound Healing and Tissue Regeneration

Skin is the first defense barrier of the human body, which can resist the invasion of external dust, microorganisms and other pollutants, and ensure that the human body maintains the homeostasis of the internal environment. Once the skin is damaged, the health threat to the human body will increase. Wound repair and the human internal environment are a dynamic process. How to effectively accelerate the healing of wounds without affecting the internal environment of the human body and guarantee that the repaired tissue retains its original function as much as possible has become a research hotspot. With the advancement of technology, researchers have combined new technologies to develop and prepare various types of materials for wound healing. This article will introduce the wound repair materials developed and prepared in recent years from three types: nanofibers, composite hydrogels, and other new materials. The paper aims to provide reference for researchers in related fields to develop and prepare multifunctional materials. This may be helpful to design more ideal materials for clinical application, and then achieve better wound healing and regeneration effects.

A DNA/Poly-(L-lysine) Hydrogel with Long Shelf-Time for 3D Cell Culture

Deoxyribonucleic acid (DNA)-based hydrogels are emerging as promising functional materials for biomedical applications. However, the shelf-time of DNA hydrogels in biological media is severely shortened by nucleases, which limit the application of DNA hydrogels. Herein, a DNA hydrogel with long shelf-time is reported for 3D cell culture. Poly-(L-lysine) (PLL) is introduced as both a cross-linker and a protectant. The electrostatic interaction between PLL and DNA drove the formation of hydrogel. PLL coating on DNA increased the steric hindrance between DNA and nucleases, thus weakening the digestion of nucleases toward phosphodiester bond. As a result, the shelf-time of DNA/PLL hydrogel for 3D cell culture is extended from generally 1 day to longer than 15 days, which has not been achieved previously. Notably, poly-AS1411-aptamers are integrated to DNA/PLL hydrogels for anchoring U87 cells, and the cell encapsulation efficiency of the DNA/PLL hydrogels with aptamer is 4-time higher than that of the hydrogels without aptamer. DNA/PLL hydrogel provided a favorable microenvironment to support the proliferation of cells, which formed cell spheroid in 15 days. This protective coating strategy solves the long-standing problem on the shelf-time of DNA hydrogel, and is envisioned to promote the development of DNA hydrogel in more biomedical applications.

3D nanofiber scaffolds from 2D electrospun membranes boost cell penetration and positive host response for regenerative medicine

The ideal tissue engineering scaffold should facilitate rapid cell infiltration and provide an optimal immune microenvironment during interactions with the host. Electrospinning can produce two-dimensional (2D) membranes mimicking the extracellular matrix. However, their dense structure hinders cell penetration, and their thin form restricts scaffold utility. In this study, latticed hydrogels were three-dimensional (3D) printed onto electrospun membranes. This technique allowed for layer-by-layer assembly of the membranes into 3D scaffolds, which maintained their resilience impressively under both dry and wet conditions. We assessed the cellular and host responses of these 3D nanofiber scaffolds by comparing random membranes and mesh-like membranes with three different mesh sizes (250, 500, and 750 μm). It was found that scaffolds with a mesh size of 500 μm were superior for M2 macrophage phenotype polarization, vascularization, and matrix deposition. Furthermore, it was confirmed by subsequent experiments such as RNA sequencing that the mesh-like topology may promote polarization to the M2 phenotype by affecting the PI3K/AKT pathway. In conclusion, our work offers a novel method for transforming 2D nanofiber membranes into 3D scaffolds. This method boasts flexibility, allowing for the use of varied electrospun membranes and hydrogels in terms of structure and composition. It has vast potential in tissue repair and regeneration.

Hierarchically Assembled Nanofiber Scaffold Guides Long Bone Regeneration by Promoting Osteogenic/Chondrogenic Differentiation of Endogenous Mesenchymal Stem Cells

Critical-sized segmental long bone defects represent a challenging clinical dilemma in the management of battlefield and trauma-related injuries. The residual bone marrow cavity of damaged long bones contains many bone marrow mesenchymal stem cells (BMSCs), which provide a substantial source of cells for bone repair. Thus, a three-dimensional (3D) vertically aligned nanofiber scaffold (VAS) is developed with long channels and large pore size. The pore of VAS toward the bone marrow cavity after transplantation, enables the scaffolds to recruit BMSCs from the bone marrow cavity to the defect area. In vivo, it is found that VAS can significantly shorten gap distance and promote new bone formation compared to the control and collagen groups after 4 and 8 weeks of implantation. The single-cell sequencing results discovered that the 3D nanotopography of VAS can promote BMSCs differentiation to chondrocytes and osteoblasts, and up-regulate related gene expression, resulting in enhancing the activities of bone regeneration, endochondral ossification, bone trabecula formation, bone mineralization, maturation, and remodeling. The Alcian blue and bone morphogenetic protein 2 (BMP-2) immunohistochemical staining verified significant cartilage formation and bone formation in the VAS group, corresponding to the single-cell sequencing results. The study can inspire the design of next-generation scaffolds for effective long-bone regeneration is expected by the authors.

New dimensions of electrospun nanofiber material designs for biotechnological uses

Electrospinning technology has garnered wide attention over the past few decades in various biomedical applications including drug delivery, cell therapy, and tissue engineering. This technology can create nanofibers with tunable fiber diameters and functionalities. However, the 2D membrane nature of the nanofibers, as well as the rigidity and low porosity of electrospun fibers, lower their efficacy in tissue repair and regeneration. Recently, new avenues have been explored to resolve the challenges associated with 2D electrospun nanofiber membranes. This review discusses recent trends in creating different electrospun nanofiber microstructures from 2D nanofiber membranes by using various post-processing methods, as well as their biotechnological applications.

Anti-Inflammatory Peptide-Conjugated Silk Fibroin/Cryogel Hybrid Dual Fiber Scaffold with Hierarchical Structure Promotes Healing of Chronic Wounds

Chronic wounds resulting from diabetes, pressure, radiation therapy, and other factors continue to pose significant challenges in wound healing. To address this, this study introduces a novel hybrid fibroin fibrous scaffold (FFS) comprising randomly arranged fibroin fibers and vertically aligned cryogel fibers (CFs). The fibroin scaffold is efficiently degummed at room temperature and simultaneously formed a porous structure. The aligned CFs are produced via directional freeze-drying, achieved by controlling solution concentration and freezing polymerization temperature. The incorporation of aligned CFs into the expanded fibroin fiber scaffold leads to enhanced cell infiltration both in vitro and in vivo, further elevating the hybrid scaffold's tissue compatibility. The anti-inflammatory peptide 1 (AP-1) is also conjugated to the hybrid fibrous scaffold, effectively transforming the inflammatory status of chronic wounds from pro-inflammatory to pro-reparative. Consequently, the FFS-AP1+CF group demonstrates superior granulation tissue formation, angiogenesis, collagen deposition, and re-epithelialization during the proliferative phase compared to the commercial product PELNAC. Moreover, the FFS-AP1+CF group displays epidermis thickness, number of regenerated hair follicles, and collagen density closer to normal skin tissue. These findings highlight the potential of random fibroin fibers/aligned CFs hybrid fibrous scaffold as a promising approach for skin tissue filling and tissue regeneration.

Bionic Bilayer Scaffold for Synchronous Hyperthermia Therapy of Orthotopic Osteosarcoma and Osteochondral Regeneration

Large osseous void, postsurgical neoplastic recurrence, and slow bone-cartilage repair rate raise an imperative need to develop functional scaffold in clinical osteosarcoma treatment. Herein, a bionic bilayer scaffold constituting croconaine dye-polyethylene glycol@sodium alginate hydrogel and poly(l-lactide)/hydroxyapatite polymer matrix is fabricated to simultaneously achieve a highly efficient killing of osteosarcoma and an accelerated osteochondral regeneration. First, biomimetic osteochondral structure along with adequate interfacial interaction of the bilayer scaffold provide a structural reinforcement for transverse osseointegration and osteochondral regeneration, as evidenced by upregulated specific expressions of collagen type-I, osteopontin, and runt-related transcription factor 2. Meanwhile, thermal ablation of the synthesized nanoparticles and mitochondrial dysfunction caused by continuously released hydroxyapatite induce residual tumor necrosis synergistically. To validate the capabilities of inhibiting tumor growth and promoting osteochondral regeneration of our proposed scaffold, a novel orthotopic osteosarcoma model simulating clinical treatment scenarios of bone tumors is established on rats. Based on amounts of in vitro and in vivo results, an effective killing of osteosarcoma and a suitable osteal-microenvironment modulation of such bionic bilayer composite scaffold are achieved, which provides insightful implications for photonic hyperthermia therapy against osteosarcoma and following osseous tissue regeneration.

Aligned cryogel fibers incorporated 3D printed scaffold effectively facilitates bone regeneration by enhancing cell recruitment and function

Reconstructing extensive cranial defects represents a persistent clinical challenge. Here, we reported a hybrid three-dimensional (3D) printed scaffold with modification of QK peptide and KP peptide for effectively promoting endogenous cranial bone regeneration. The hybrid 3D printed scaffold consists of vertically aligned cryogel fibers that guide and promote cell penetration into the defect area in the early stages of bone repair. Then, the conjugated QK peptide and KP peptide further regulate the function of the recruited cells to promote vascularization and osteogenic differentiation in the defect area. The regenerated bone volume and surface coverage of the dual peptide-modified hybrid scaffold were significantly higher than the positive control group. In addition, the dual peptide-modified hybrid scaffold demonstrated sustained enhancement of bone regeneration and avoidance of bone resorption compared to the collagen sponge group. We expect that the design of dual peptide-modified hybrid scaffold will provide a promising strategy for bone regeneration.

Mechanically resilient hybrid aerogels containing fibers of dual-scale sizes and knotty networks for tissue regeneration

The structure and design flexibility of aerogels make them promising for soft tissue engineering, though they tend to come with brittleness and low elasticity. While increasing crosslinking density may improve mechanics, it also imparts brittleness. In soft tissue engineering, resilience against mechanical loads from mobile tissues is paramount. We report a hybrid aerogel that consists of self-reinforcing networks of micro- and nanofibers. Nanofiber segments physically entangle microfiber pillars, allowing efficient stress distribution through the intertwined fiber networks. We show that optimized hybrid aerogels have high specific tensile moduli (~1961.3 MPa cm3 g-1) and fracture energies (~7448.8 J m-2), while exhibiting super-elastic properties with rapid shape recovery (~1.8 s). We demonstrate that these aerogels induce rapid tissue ingrowth, extracellular matrix deposition, and neovascularization after subcutaneous implants in rats. Furthermore, we can apply them for engineering soft tissues via minimally invasive procedures, and hybrid aerogels can extend their versatility to become magnetically responsive or electrically conductive, enabling pressure sensing and actuation.

Transforming layered 2D mats into multiphasic 3D nanofiber scaffolds with tailored gradient features for tissue regeneration

Multiphasic scaffolds with tailored gradient features hold significant promise for tissue regeneration applications. Herein, this work reports the transformation of two-dimensional (2D) layered fiber mats into three dimensional (3D) multiphasic scaffolds using a 'solids-of-revolution' inspired gas-foaming expansion technology. These scaffolds feature precise control over fiber alignment, pore size, and regional structure. Manipulating nanofiber mat layers and Pluronic F127 concentrations allows further customization of pore size and fiber alignment within different scaffold regions. The cellular response to multiphasic scaffolds demonstrates the number of cells migrated and proliferated onto the scaffolds are mainly dependent on the pore size rather than fiber alignment. In vivo subcutaneous implantation of multiphasic scaffolds to rats reveals substantial cell infiltration, neo tissue formation, collagen deposition, and new vessel formation within scaffolds, greatly surpassing the capabilities of traditional nanofiber mats. Histological examination indicates the importance of optimizing pore size and fiber alignment for promotion of cell infiltration and tissue regeneration. Overall, these scaffolds have potential applications in tissue modeling, studying tissue-tissue interactions, interface tissue engineering, and high-throughput screening for optimized tissue regeneration.

Radially Electrospun Fibrous Membrane Incorporated with Copper Peroxide Nanodots Capable of Self-Catalyzed Chemodynamic Therapy for Angiogenesis and Healing Acceleration of Diabetic Wounds

Vascular dysfunction severely hinders the healing process of diabetic wounds. Therefore, a radially structured fibrous membrane was fabricated through electrospinning by using a polycaprolactone (PCL) and polyvinylpyrrolidone (PVP) mixed solution containing copper peroxide nanoparticles (CPs) as the chemodynamic therapy (CDT) agents, aiming to simultaneously accelerate tissue regeneration and angiogenesis. The fabricated membrane allowed for the in situ H₂O₂ generation activated by the acidic diabetic microenvironment and the subsequent Fenton-type reactions to realize 99.4% elimination against Staphylococcus aureus. Besides, the released Cu²⁺ ions significantly enhanced the expression of hypoxia-inducible factor-1α (HIF-1α) and vascular endothelial growth factor (VEGF) in human umbilical vein endothelial cells (HUVECs), and they showed enhanced in vitro angiogenesis. Interestingly, the CP-embedded membrane also guided cell spreading and orientated migration of L929 fibroblasts along the fiber distribution through the radially aligned topology. The in vivo implantation indicated that the raidally structured membrane modified by CPs not only dramatically accelerated wound healing of diabetic Sprague-Dawley (SD) rats in 14 days but also promoted angiogenesis in wound sites. The combination of the in situ CDT with the radially structured morphology of the functional membrane is highly promising in applications to promote diabetic wound healing through anti-infection and revascularization.

Evolution of nanostructured skin patches towards multifunctional wearable platforms for biomedical applications

Recent advances in the field of skin patches have promoted the development of wearable and implantable bioelectronics for long-term, continuous healthcare management and targeted therapy. However, the design of electronic skin (e-skin) patches with stretchable components is still challenging and requires an in-depth understanding of the skin-attachable substrate layer, functional biomaterials and advanced self-powered electronics. In this comprehensive review, we present the evolution of skin patches from functional nanostructured materials to multi-functional and stimuli-responsive patches towards flexible substrates and emerging biomaterials for e-skin patches, including the material selection, structure design and promising applications. Stretchable sensors and self-powered e-skin patches are also discussed, ranging from electrical stimulation for clinical procedures to continuous health monitoring and integrated systems for comprehensive healthcare management. Moreover, an integrated energy harvester with bioelectronics enables the fabrication of self-powered electronic skin patches, which can effectively solve the energy supply and overcome the drawbacks induced by bulky battery-driven devices. However, to realize the full potential offered by these advancements, several challenges must be addressed for next-generation e-skin patches. Finally, future opportunities and positive outlooks are presented on the future directions of bioelectronics. It is believed that innovative material design, structure engineering, and in-depth study of fundamental principles can foster the rapid evolution of electronic skin patches, and eventually enable self-powered close-looped bioelectronic systems to benefit mankind.

Biomimetic natural biomaterials for tissue engineering and regenerative medicine: new biosynthesis methods, recent advances, and emerging applications

Biomimetic materials have emerged as attractive and competitive alternatives for tissue engineering (TE) and regenerative medicine. In contrast to conventional biomaterials or synthetic materials, biomimetic scaffolds based on natural biomaterial can offer cells a broad spectrum of biochemical and biophysical cues that mimic the in vivo extracellular matrix (ECM). Additionally, such materials have mechanical adaptability, microstructure interconnectivity, and inherent bioactivity, making them ideal for the design of living implants for specific applications in TE and regenerative medicine. This paper provides an overview for recent progress of biomimetic natural biomaterials (BNBMs), including advances in their preparation, functionality, potential applications and future challenges. We highlight recent advances in the fabrication of BNBMs and outline general strategies for functionalizing and tailoring the BNBMs with various biological and physicochemical characteristics of native ECM. Moreover, we offer an overview of recent key advances in the functionalization and applications of versatile BNBMs for TE applications. Finally, we conclude by offering our perspective on open challenges and future developments in this rapidly-evolving field.

Designing of gradient scaffolds and their applications in tissue regeneration

Gradient scaffolds are isotropic/anisotropic three-dimensional structures with gradual transitions in geometry, density, porosity, stiffness, etc., that mimic the biological extracellular matrix. The gradient structures in biological tissues play a major role in various functional and metabolic activities in the body. The designing of gradients in the scaffold can overcome the current challenges in the clinic compared to conventional scaffolds by exhibiting excellent penetration capacity for nutrients & cells, increased cellular adhesion, cell viability & differentiation, improved mechanical stability, and biocompatibility. In this review, the recent advancements in designing gradient scaffolds with desired biomimetic properties, and their implication in tissue regeneration applications have been briefly explained. Furthermore, the gradients in native tissues such as bone, cartilage, neuron, cardiovascular, skin and their specific utility in tissue regeneration have been discussed in detail. The insights from such advances using gradient-based scaffolds can widen the horizon for using gradient biomaterials in tissue regeneration applications.

Radial Sponges Facilitate Wound Healing by Promoting Cell Migration and Angiogenesis

The topographic cues of wound dressings play important roles in regulating cellular behaviors, such as cellular migration and morphology, and are capable of providing a prolonged stimulus for promoting wound healing. However, 3D porous dressings that can guide wound healing from the periphery to the center are poorly studied. Herein, radial sponges with adjustable lamellar spacing and microridge spacing by ice templating are developed to facilitate wound healing. With denser lamellae and microridges, fibroblasts achieve a more orderly arrangement, a larger elongation, and a greater migration rate. Meanwhile, the elongated state enables human umbilical vein endothelial cells to vascularization. The faster healing rate and a higher degree of vascularization based on radial sponges are further demonstrated in full-thickness skin defects in rats. Taken together, radial sponges with the densest lamellae and microridges perform the best in guiding the wound from the periphery to the center of the repair environment. It is believed that the proposed structure here can be combined with various biochemical factors to provide dressings with functions.

Nanofiber Aerogels with Precision Macrochannels and LL-37-Mimic Peptides Synergistically Promote Diabetic Wound Healing

Fast healing of diabetic wounds remains a major clinical challenge. Herein, this work reports a strategy to combine nanofiber aerogels containing precision macrochannels and the LL-37-mimic peptide W379 for rapid diabetic wound healing. Nanofiber aerogels consisting of poly(glycolide-co-lactide) (PGLA 90:10)/gelatin and poly-p-dioxanone (PDO)/gelatin short electrospun fiber segments were prepared by partially anisotropic freeze-drying, crosslinking, and sacrificial templating with three-dimensional (3D)-printed meshes, exhibiting nanofibrous architecture and precision micro-/macrochannels. Like human cathelicidin LL-37, W379 peptide at a concentration of 3 μg/mL enhanced the migration and proliferation of keratinocytes and dermal fibroblasts in a cell scratch assay and a proliferation assay. In vivo studies show that nanofiber aerogels with precision macrochannels can greatly promote cell penetration compared to aerogels without macrochannels. Relative to control and aerogels with and without macrochannels, adding W379 peptides to aerogels with precision macrochannels shows the best efficacy in healing diabetic wounds in mice in terms of cell infiltration, neovascularization, and re-epithelialization. The fast re-epithelization could be due to upregulation of phospho-extracellular signal-regulated kinase (p38 MAPK) after treatment with W379. Together, the approach developed in this work could be promising for the treatment of diabetic wounds and other chronic wounds.

Immune evaluation of granulocyte-macrophage colony stimulating factor loaded hierarchically 3D nanofiber scaffolds in a humanized mice model

Background: Immune evaluation of biomaterials for tissue regeneration is a critical preclinical evaluation. The current evaluation criterion (ISO 10993-1 or GB/T 16886) uses rodents to perform the immune evaluation. However, the immune system of rodents is different from humans, the obtained results may not be reliable, which could lead directly to the failure of clinical trials. Granulocyte-macrophage colony-stimulating factor (GM-CSF) shows a great potential application in tissue regeneration by regulating local immune responses. The presented work combines the advantages of GM-CSF (immunoregulation) and hierarchically 3D nanofiber scaffolds (tissue regeneration). Methods: Firstly, we fabricated GM-CSF loaded 3D radially aligned nanofiber scaffolds, and then subcutaneous implantation was performed in humanized mice. The whole scaffold and surrounding tissue were harvested at each indicated time point. Finally, the cell infiltration and local immune responses were detected by histological observations, including H&E and Masson staining and immunochemistry. Results: We found significant cell migration and extracellular matrix deposition within the 3D radially aligned nanofiber scaffold after subcutaneous implantation. The locally released GM-CSF could accelerate the expression of human dendritic cells (CD11c) only 3 days after subcutaneous implantation. Moreover, higher expression of human cytotoxic T cells (CD3⁺/CD8⁺), M1 macrophages (CD68/CCR7) was detected within GM-CSF loaded radially aligned nanofiber scaffolds and their surrounding tissues. Conclusions: The 3D radially aligned scaffold can accelerate cell migration from surrounding tissues to regenerate the wound area. And the locally released GM-CSF enhances dendritic cell recruitment and activation of cytotoxic T cells and M1 macrophages. Taken together, the GM-CSF loaded 3D radially aligned nanofiber scaffolds have a promising potential for achieving tissue regeneration.

Design of Volumetric Nanolayers via Rapid Proteolysis of Silk Fibroin for Tissue Engineering

Various methods have been studied to make a regenerated silk fibroin solution. However, most of them take too much time and effort to liquefy. Here, we report that a regenerated silk fibroin solution could be prepared within seconds through acid proteolysis for the first time. The solubilized fibroin could be applied to advanced tissue engineering. Our method shortened the production time to one day (more than 10 times) compared to the general fibroin solution preparation method. It was confirmed that the initial protein affinity nearly doubled from 0.028 to 0.076 μg·mm^-2 in FF(ac) compared to FF(aq). A fibroin nanofiber layer having a volumetric hierarchical structure was prepared by electrospinning an acid-proteolyzed fibroin solution, followed by gas foaming. In vitro results of cell adhesion and proliferation capacity of the gas-foamed scaffold were not significantly different compared to the two-dimensional (2D) fibroin nanofiber membrane, overcoming the limitations of volumetric nanofiber scaffolds. We are confident that our research will greatly contribute to the development of regenerative engineering using other proteins.

Design of 3D polycaprolactone/ε-polylysine-modified chitosan fibrous scaffolds with incorporation of bioactive factors for accelerating wound healing

Electrospun nanofibrous scaffolds show great application potentials for wound healing owing to their effective simulation of extracellular matrix (ECM). Three-dimensional (3D) nanofibrous dressings exhibit relatively high specific surface areas, better mimicry of native ECM, adjustable hydrophilicity and breathability, good histocompatibility, enhanced wound healing, and reduced inflammation. In the present work, we designed the 3D polycaprolactone/ε-polylysine modified chitosan (PCL/PCS) nanofibrous scaffolds by an electrospinning and gas foaming process. Then, gelatin and heparin (Gel/Hep) were assembled onto the surface of PCL/PCS nanofibers by electrostatic adsorption, and vascular endothelial growth factors (VEGFs) were also synchronously incorporated into Gel/Hep layer to form a multifunctional 3D nanofibrous scaffold (PCL/PCS@Gel/Hep+VEGF) for accelerating wound healing. The as-fabricated 3D PCL/PCS@GEL/Hep+VEGF nanofibrous scaffold showed excellent antibacterial ability, hemocompatibility and biocompatibility in vitro and wound healing ability in vivo. Immunological analysis showed that the as-fabricated nanofibrous scaffold inhibited inflammation at the wound sites while promoting angiogenesis during the wound healing process. STATEMENT OF SIGNIFICANCE: The electrospun 3D fibrous scaffolds using polycaprolactone/ε-polylysine modified chitosan (PCL/PCS) have been fabricated as backbone for mimicking the extracellular matrix (ECM). Gelatin and heparin (Gel/Hep) were wrapped onto the surface of PCL/PCS fibers by electrostatic adsorption and vascular endothelial growth factors (VEGFs) were also synchronously incorporated into surface Gel/Hep layer to form multifunctional 3D fibrous scaffolds. The as-fabricated multifunctional 3D fibrous scaffolds with good antibacterial ability and biocompatibility have been used as dressings for accelerating wound healing by inhibiting inflammation at the wound sites while promoting angiogenesis during the wound healing process.

Micro-Gel Ensembles for Accelerated Healing of Chronic Wound via pH Regulation

The pH value in the wound milieu plays a key role in cellular processes and cell cycle processes involved in the process of wound healing. Here, a microfluidic assembly technique is employed to fabricate micro-gel ensembles that can precisely tune the pH value of wound surface and accelerate wound healing. The micro-gel ensembles consist of poly (hydroxypropyl acrylate-co-acrylic acid)-magnesium ions (poly-(HPA-co-AA)-Mg²⁺ ) gel and carboxymethyl chitosan (CMCS) gel, which can release and absorb hydrogen ion (H⁺ ) separately at different stages of healing in response to the evolution of wound microenvironment. By regulating the wound pH to affect the proliferation and migration of cell on the wound and the activity of various biological factors in the wound, the physiological processes are greatly facilitated which results in much accelerated healing of chronic wound. This work presents an effective strategy in designing wound healing materials with vast potentials for chronic wound management.

Electrospun Nanofibers for Wound Management

Electrospun nanofibers show great potential in biomedical applications. This mini review article traces the recent advances in electrospun nanofibers for wound management via various approaches. Initially, we provide a short note on the four phases of wound healing, including hemostasis, inflammation, proliferation, and remodeling. Then, we state how the nanofiber dressings can stop bleeding and reduce the pain. Following that, we discuss the delivery of therapeutics and cells using different types of nanofibers for enhancing cell migration, angiogenesis, and re-epithelialization, resulting in the promotion of wound healing. Finally, we present the conclusions and future perspectives regarding the use of electrospun nanofibers for wound management.

Nanofiber capsules for minimally invasive sampling of biological specimens from gastrointestinal tract

Accurate and rapid point-of-care tissue and microbiome sampling is critical for early detection of cancers and infectious diseases and often result in effective early intervention and prevention of disease spread. In particular, the low prevalence of Barrett's and gastric premalignancy in the Western world makes population-based endoscopic screening unfeasible and cost-ineffective. Herein, we report a method that may be useful for prescreening the general population in a minimally invasive way using a swallowable, re-expandable, ultra-absorbable, and retrievable nanofiber cuboid and sphere produced by electrospinning, gas-foaming, coating, and crosslinking. The water absorption capacity of the cuboid- and sphere-shaped nanofiber objects is shown ∼6000% and ∼2000% of their dry mass. In contrast, unexpanded semicircular and square nanofiber membranes showed <500% of their dry mass. Moreover, the swallowable sphere and cuboid were able to collect and release more bacteria, viruses, and cells/tissues from solutions as compared with unexpanded scaffolds. In addition to that, an expanded sphere shows higher cell collection capacity from the esophagus inner wall as compared with the unexpanded nanofiber membrane. Taken together, the nanofiber capsules developed in this study could provide a minimally invasive method of collecting biological samples from the duodenal, gastric, esophagus, and oropharyngeal sites, potentially leading to timely and accurate diagnosis of many diseases. STATEMENT OF SIGNIFICANCE: Recently, minimally invasive technologies have gained much attention in tissue engineering and disease diagnosis. In this study, we engineered a swallowable and retrievable electrospun nanofiber capsule serving as collection device to collect specimens from internal organs in a minimally invasive manner. The sample collection device could be an alternative endoscopy to collect the samples from internal organs like jejunum, stomach, esophagus, and oropharynx without any sedation. The newly engineered nanofiber capsule could be used to collect, bacteria, virus, fluids, and cells from the abovementioned internal organs. In addition, the biocompatible and biodegradable nanofiber capsule on a string could exhibit a great sample collection capacity for the primary screening of Barret Esophagus, acid reflux, SARS-COVID-19, Helicobacter pylori, and gastric cancer.

Accelerating Cell Migration along Radially Aligned Nanofibers through the Addition of Electrosprayed Nanoparticles in a Radial Density Gradient

Scaffolds capable of promoting cell migration from the periphery towards the center along the radial direction hold promises for tissue regeneration. Here we report a simple and general method based on masked electrospray for the fabrication of such scaffolds by depositing collagen nanoparticles on radially-aligned nanofibers in a radial density gradient. Placed between the metallic needle and the collector, an aperture with tunable opening sizes serves as the mask. By increasing the size of the opening at a fixed speed, the electrosprayed particles take a radial density gradient that decreases from the center to the periphery. When deposited on a glass slide, the radial density gradient of collagen nanoparticles promotes the migration of fibroblasts from the periphery towards the center. By replacing the glass slide with a scaffold comprised of radially-aligned nanofibers, a synergetic effect arises to further accelerate cell migration along the radial direction. The synergistic effect can be attributed to a unique combination of the topographic cue arising from the aligned nanofibers and the haptotactic cue enabled by the graded nanoparticles. This work demonstrates a method to maximize cell migration from the periphery towards the center through a combination of topographic and haptotactic cues.

Unraveling of Advances in 3D-Printed Polymer-Based Bone Scaffolds

The repair of large-area irregular bone defects is one of the complex problems in orthopedic clinical treatment. The bone repair scaffolds currently studied include electrospun membrane, hydrogel, bone cement, 3D printed bone tissue scaffolds, etc., among which 3D printed polymer-based scaffolds Bone scaffolds are the most promising for clinical applications. This is because 3D printing is modeled based on the im-aging results of actual bone defects so that the printed scaffolds can perfectly fit the bone defect, and the printed components can be adjusted to promote Osteogenesis. This review introduces a variety of 3D printing technologies and bone healing processes, reviews previous studies on the characteristics of commonly used natural or synthetic polymers, and clinical applications of 3D printed bone tissue scaffolds, analyzes and elaborates the characteristics of ideal bone tissue scaffolds, from t he progress of 3D printing bone tissue scaffolds were summarized in many aspects. The challenges and potential prospects in this direction were discussed.

Highly Transparent Nanofibrous Membranes Used as Transparent Masks for Efficient PM0.3 Removal

Currently, the quest for highly transparent and flexible fibrous membranes with robust mechanical characteristics, high breathability, and good filtration performance is rapidly rising because of their potential use in the fields of electronics, energy, environment, medical, and health. However, it is still an extremely challenging task to realize transparent fibrous membranes due to serious surface light reflection and internal light scattering. Here, we report the design and development of a simple and effective topological structure to create porous, breathable, and high visible light transmitting fibrous membranes (HLTFMs). The resultant HLTFMs exhibit good optical performance (up to 90% transmittance) and high porosities (>80%). The formation of such useful structure with high light transmittance has been revealed by electric field simulation, and the mechanism of fibrous membrane structure to achieve high light transmittance has been proposed. Moreover, transparent masks have been prepared to evaluate the filtration performance and analyze their feasibility to meet requirement of facial recognition systems. The prepared masks display high transparency (>80%), low pressure drop (<100 Pa) and high filtration efficiency (>90%). Furthermore, the person wearing this mask can be successfully identified by facial recognition systems. Therefore, this work provides an idea for the development of transparent, breathable, and high-performance fibrous membranes.

Biomimetic Aligned Micro-/Nanofibrous Composite Membranes with Ultrafast Water Transport and Evaporation for Efficient Indoor Humidification

Humidifying membranes with ultrafast water transport and evaporation play a vital role in indoor humidification that improves personal comfort and industrial productivity in daily life. However, commercial nonwoven (NW) humidifying membranes show mediocre humidification capability owing to limited wicking capacity, low water absorption, and relatively less water evaporation. Herein, we report a biomimetic micro-/nanofibrous composite membrane with a highly aligned fibrous structure using a humidity-induced electrospinning technique for high-efficiency indoor humidification. Surface wettability and roughness are also tailored to achieve a high degree of superhydrophilicity by embedding hydrophilic silicon dioxide nanoparticles (SiO₂ NPs) into the fiber matrix. The synergistic effect of the highly aligned fibrous structure and surface wettability endows composite membranes with ultrafast water transport and evaporation. Strikingly, the composite membrane exhibits an outstanding wicking height of 19.5 cm, a superior water absorption of 497.7%, a fast evaporation rate of 0.34 mL h^-1, and a relatively low air pressure drop of 14.4 Pa, thereby achieving a remarkable humidification capacity of 514 mL h^-1 (57% higher than the commercial NW humidifying membrane). The successful synthesis of this biomimetic micro-/nanofibrous composite membrane provides new insights into the development of micro-/nanofibrous humidifying membranes for personal health and comfort as well as industrial production.

Nanofiber/hydrogel core-shell scaffolds with three-dimensional multilayer patterned structure for accelerating diabetic wound healing

Impaired angiogenesis is one of the predominant reasons for non-healing diabetic wounds. Herein, a nanofiber/hydrogel core–shell scaffold with three-dimensional (3D) multilayer patterned structure (3D-PT-P/GM) was introduced for promoting diabetic wound healing with improved angiogenesis. The results showed that the 3D-PT-P/GM scaffolds possessed multilayered structure with interlayer spacing of about 15–80 μm, and the hexagonal micropatterned structures were uniformly distributed on the surface of each layer. The nanofibers in the scaffold exhibited distinct core–shell structures with Gelatin methacryloyl (GelMA) hydrogel as the shell and Poly (d, l-lactic acid) (PDLLA) as the core. The results showed that the porosity, water retention time and water vapor permeability of the 3D-PT-P/GM scaffolds increased to 1.6 times, 21 times, and 1.9 times than that of the two-dimensional (2D) PDLLA nanofibrous scaffolds, respectively. The in vitro studies showed that the 3D-PT-P/GM scaffolds could significantly promote cell adhesion, proliferation, infiltration and migration throughout the scaffolds, and the expression of cellular communication protein-related genes, as well as angiogenesis-related genes in the same group, was remarkably upregulated. The in vivo results further demonstrated that the 3D-PT-P/GM scaffolds could not only effectively absorb exudate and provide a moist environment for the wound sites, but also significantly promote the formation of a 3D network of capillaries. As a result, the healing of diabetic wounds was accelerated with enhanced angiogenesis, granulation tissue formation, and collagen deposition. These results indicate that nanofiber/hydrogel core–shell scaffolds with 3D multilayer patterned structures could provide a new strategy for facilitating chronic wound healing.

PLGA-collagen-BPNS Bifunctional composite mesh for photothermal therapy of melanoma and skin tissue engineering

The treatment of melanoma requires not only the elimination of skin cancer cells but also skin regeneration to heal defects. To achieve this goal, a bifunctional composite scaffold of poly(DL-lactic-co-glycolic acid) (PLGA), collagen and black phosphorus nanosheets (BPNSs) was prepared by hybridizing a BPNS-embedded collagen sponge with a PLGA knitted mesh. The composite mesh increased the temperature under near-infrared laser irradiation. The incorporation of BPNSs provided the PLGA-collagen-BPNS composite mesh with excellent photothermal properties for the photothermal ablation of melanoma cells both in vitro and in vivo. The PLGA-collagen-BPNS composite mesh had high mechanical strength for easy handling. The PLGA-collagen-BPNS composite mesh facilitated the proliferation of fibroblasts, promoted the expression of angiogenesis-related genes and the genes of components of the extracellular matrix for skin tissue regeneration. The high mechanical strength, photothermal ablation capability and skin tissue regeneration effects demonstrate that the bifunctional PLGA-collagen-BPNS composite mesh is a versatile and effective platform for the treatment of melanoma and the regeneration of skin defects.

Emerging concepts in bone repair and the premise of soft materials

Human bone has a strong regenerative capacity that allows for restoration of its function and structure after damage. For degenerative bone diseases or large defects, bone regeneration requirements exceed the natural potential for self-healing, so bone grafts or bone substitute materials are required to support the regeneration of bone tissue. Compared to the plethora of endogenous bioactive molecules and cells in native bone grafts, the regenerative capacity of tissue-engineered materials is limited. The modest clinical impact of tissue-engineered strategies in this domain can be attributed to a failure to fully recognize key physical and biological events during bone healing, and to recapitulate the structure and composition of the target tissue to generate truly biomimetic grafts. This limitation has motivated the emergence of new strategies such as immunomodulation, endochondral ossification routes, engineered microtissues and hematoma regulation, and the development of advanced biomaterials including gene-activated matrices, soft microgels and hierarchically designed materials.

Cell-subpopulation alteration and FGF7 activation regulate the function of tendon stem/progenitor cells in 3D microenvironment revealed by single-cell analysis

Three dimensional (3D) microenvironments more accurately replicate native microenvironments for stem cell maintenance and function compared with two dimensional (2D) microenvironments. However, the molecular mechanisms by which 3D microenvironments regulate stem cell function remain largely unexplored at the single-cell level. Here, using a single-cell analysis and functional analysis, we found not all cell-subpopulations respond to 3D microenvironments based on a systematically 3D gelatin microcarrier culture system we developed for the expansion and function maintenance of hTSPCs. 3D microenvironments alter the cell-subpopulation distribution of human tendon stem/progenitor cells (hTSPCs) by improving the proportion of ICAM1+ITGB8+ and FGF7+CYGB+ subpopulations. We also revealed the activated FGF7 signaling in the two subpopulations is responsible for the enhanced tenogenesis of hTSPCs through cell-cell interactions. The hTSPCs cultured in 3D niche with a specific cell-subpopulation structure exhibited superior stem-cell characteristics and functions both in vitro and in vivo. Together, our study demonstrates that 3D microenvironments can regulate stem-cell function by modulating the critical cell subpopulation and identifies FGF7 as a novel regulator for tenogenic differentiation and tendon regeneration.

Functionalized Antimicrobial Nanofibers: Design Criteria and Recent Advances

The rise of antibiotic resistance has become a major threat to human health and it is spreading globally. It can cause common infectious diseases to be difficult to treat and leads to higher medical costs and increased mortality. Hence, multifunctional polymeric nanofibers with distinctive structures and unique physiochemical properties have emerged as a neo-tool to target biofilm and overcome deadly bacterial infections. This review emphasizes electrospun nanofibers' design criteria and properties that can be utilized to enhance their therapeutic activity for antimicrobial therapy. Also, we present recent progress in designing the surface functionalization of antimicrobial nanofibers with non-antibiotic agents for effective antibacterial therapy. Lastly, we discuss the future trends and remaining challenges for polymeric nanofibers.

Biomaterials with structural hierarchy and controlled 3D nanotopography guide endogenous bone regeneration

Biomaterials without exogenous cells or therapeutic agents often fail to achieve rapid endogenous bone regeneration with high quality. Here, we reported a class of three-dimensional (3D) nanofiber scaffolds with hierarchical structure and controlled alignment for effective endogenous cranial bone regeneration. 3D scaffolds consisting of radially aligned nanofibers guided and promoted the migration of bone marrow stem cells from the surrounding region to the center in vitro. These scaffolds showed the highest new bone volume, surface coverage, and mineral density among the tested groups in vivo. The regenerated bone exhibited a radially aligned fashion, closely recapitulating the scaffold's architecture. The organic phase in regenerated bone showed an aligned, layered, and densely packed structure, while the inorganic mineral phase showed a uniform distribution with smaller pore size and an even distribution of stress upon the simulated compression. We expect that this study will inspire the design of next-generation biomaterials for effective endogenous bone regeneration with desired quality.

Composite scaffolds of black phosphorus nanosheets and gelatin with controlled pore structures for photothermal cancer therapy and adipose tissue engineering

Breast cancer treatment needs to eradicate cancer cells and restore breast defects after surgical intervention. Herein, bifunctional composite scaffolds of black phosphorus nanosheets (BPNSs) and gelatin were designed to kill breast cancer cells and induce adipose tissue reconstruction. The composite scaffolds were prepared by hybridizing photothermal BPNSs with porous gelatin matrices by adding pre-prepared ice particles to precisely adjust their pore structures. The composite scaffolds had large, well-interconnected spherical pores, which allowed cell migration and infiltration. Hybridization with BPNSs increased the compression strength of the scaffolds. The composite scaffolds possessed a high photothermal conversion capacity that was dependent on the amount of BPNSs. The composite scaffold with a high amount of BPNSs could completely kill breast cancer cells in vitro and in vivo under laser irradiation. Moreover, cell culture and animal experiment results showed that the composite scaffolds promoted lipid oil droplet formation and upregulated the expression of adipogenesis-related genes when hMSCs were cultured in the scaffolds. The composite scaffolds could offer a facile platform to exert anticancer effects against breast cancer cells and promote the reconstruction of adipose tissue.

Minimally Invasive Delivery of 3D Shape Recoverable Constructs with Ordered Structures for Tissue Repair

Minimally invasive procedures are becoming increasingly more common in surgery. However, the biomaterials capable of delivering biomimetic, three-dimensional (3D) functional tissues in a minimally invasive manner and exhibiting ordered structures after delivery are lacking. Herein, we reported the fabrication of gelatin methacryloyl (GelMA)-coated, 3D expanded nanofiber scaffolds, and their potential applications in minimally invasive delivery of 3D functional tissue constructs with ordered structures and clinically appropriate sizes (4 cm × 2 cm × 1.5 mm). GelMA-coated, expanded 3D nanofiber scaffolds produced by combining electrospinning, gas-foaming expansion, hydrogel coating, and cross-linking are extremely shape recoverable after release of compressive strain, displaying a superelastic property. Such scaffolds can be seeded with various types of cells, including dermal fibroblasts, bone marrow-derived mesenchymal stem cells, and human neural stem/precursor cells to form 3D complex tissue constructs. Importantly, the developed 3D tissue constructs can be compressed and loaded into a 4 mm diameter glass tube for minimally invasive delivery without compromising the cell viability. Taken together, the method developed in this study could hold great promise for transplantation of biomimetic, 3D functional tissue constructs with well-organized structures for tissue repair and regeneration using minimally invasive procedures like laparoscopy and thoracoscopy.

Additive manufacturing pertaining to bone: Hopes, reality and future challenges for clinical applications

For the past 20 years, the democratization of additive manufacturing (AM) technologies has made many of us dream of: low cost, waste-free, and on-demand production of functional parts; fully customized tools; designs limited by imagination only, etc. As every patient is unique, the potential of AM for the medical field is thought to be considerable: AM would allow the division of dedicated patient-specific healthcare solutions entirely adapted to the patients' clinical needs. Pertinently, this review offers an extensive overview of bone-related clinical applications of AM and ongoing research trends, from 3D anatomical models for patient and student education to ephemeral structures supporting and promoting bone regeneration. Today, AM has undoubtably improved patient care and should facilitate many more improvements in the near future. However, despite extensive research, AM-based strategies for bone regeneration remain the only bone-related field without compelling clinical proof of concept to date. This may be due to a lack of understanding of the biological mechanisms guiding and promoting bone formation and due to the traditional top-down strategies devised to solve clinical issues. Indeed, the integrated holistic approach recommended for the design of regenerative systems (i.e., fixation systems and scaffolds) has remained at the conceptual state. Challenged by these issues, a slower but incremental research dynamic has occurred for the last few years, and recent progress suggests notable improvement in the years to come, with in view the development of safe, robust and standardized patient-specific clinical solutions for the regeneration of large bone defects.

A radial 3D polycaprolactone nanofiber scaffold modified by biomineralization and silk fibroin coating promote bone regeneration in vivo

The treatment and repair of large bone defects remains a major therapeutic challenge in the clinical setting. Nanofiber scaffolds fabricated via the electrospinning technique have been developed as a universal method for bone regeneration due to their suitable properties. However, traditional two-dimensional (2D) nanofiber mats are usually too dense, which may prevent cell infiltration and growth, thereby restricting their application. Herein, a three-dimensional (3D) polycaprolactone nanofiber scaffold was developed, modified by biomineralization and silk fibroin coating. The scaffold possessed a parallel array of nanofiber surfaces, mimicking the parallel structure of fibrils in natural bone tissue. Furthermore, the fabricated radially or laterally interconnected macrochannels were investigated to elucidate the effect of the scaffold structure on bone regeneration. In vitro studies revealed that the scaffolds could guide cell arrangement and that the radially aligned scaffold demonstrated a stronger ability to promote cell proliferation. In vivo results showed that the radially aligned scaffold could guide tissue arrangement and remodeling and support a significantly faster regeneration rate of bone tissue. Therefore, 3D-mineralized polycaprolactone nanofiber scaffolds with radially interconnected macrochannels and aligned nanofibers are expected to be used in tissue engineering, including in the repair of bone defects, cartilage or other composite tissues.