Nanomaterials Facilitating Microbial Extracellular Electron Transfer at Interfaces

Single-walled Carbon Nanotubes Wrapped with Charged Polysaccharides Enhance Extracellular Electron Transfer

Microbial electrochemical systems (MESs) rely on the microbes' ability to transfer charges from their anaerobic respiratory processes to electrodes through extracellular electron transfer (EET). To increase the generally low output signal in devices, advanced bioelectrical interfaces tend to augment this problem by attaching conducting nanoparticles, such as positively charged multiwalled carbon nanotubes (CNTs), to the base carbon electrode to electrostatically attract the negatively charged bacterial cell membrane. On the other hand, some reports point to the importance of the magnitude of the surface charge of functionalized single-walled CNTs (SWCNTs) as well as the size of functional groups for interaction with the cell membrane, rather than their polarity. To shed light on these phenomena, in this study, we prepared and characterized well-solubilized aqueous dispersions of SWCNTs functionalized by either positively or negatively charged cellulose-derivative polymers, as well as with positively charged or neutral small molecular surfactants, and tested the electrochemical performance of Shewanella oneidensis MR-1 in MESs in the presence of these functionalized SWCNTs. By simple injection into the MESs, the positively charged polymeric SWCNTs attached to the base carbon felt (CF) electrode, and as fluorescence microscopy revealed, allowed bacteria to attach to these structures. As a result, EET currents continuously increased over several days of monitoring, without bacterial growth in the electrolyte. Negatively charged polymeric SWCNTs also resulted in continuously increasing EET currents and a large number of bacteria on CF, although SWCNTs did not attach to CF. In contrast, SWCNTs functionalized by small-sized surfactants led to a decrease in both currents and the amount of bacteria in the solution, presumably due to the detachment of surfactants from SWCNTs and their detrimental interaction with cells. We expect our results will help researchers in designing materials for smart bioelectrical interfaces for low-scale microbial energy harvesting, sensing, and energy conversion applications.

Electric wiring of bacteria using redox polymers and selective measurement of metabolic activity in the presence of surrounding planktonic bacteria

Non-electroactive bacteria (n-EAB), constituting the majority of known bacteria to date, have been underutilized in electrochemical conversion technologies due to their lack of direct electron transfer to electrodes. In this study, we established an electric wiring between n-EAB (gram-positive Bacillus subtilis and gram-negative Escherichia coli) and an extracellular electrode via a ferrocene-polyethyleneimine-based redox polymer (Fc-PEI). Chronoamperometry recordings indicated that Fc-PEI can transfer intracellular electrons to the extracellular electrode regardless of the molecular organization of PEI (linear or branched) and the membrane structure of bacteria (gram-positive or -negative). As fluorescence staining suggested, Fc-PEI improves the permeability of the bacterial cell membrane, enabling electron carriers in the cell to react with Fc. In addition, experiments with Fc-immobilized electrodes without PEI suggested the existence of an alternative electron transfer pathway from B. subtilis to the extracellular Fc adsorbed onto the cell membrane. Furthermore, we proposed for the first time that the bacteria/Fc-linear PEI modified structure enables selective measurement of immobilized bacterial activity by physically blocking contact between the electrode surface and planktonic cells co-existing in the surrounding media. Such electrodes can be a powerful analytical tool for elucidating the metabolic activities of specific bacteria wired to the electrode even within complex bacterial communities.

Heterogeneous g-C3N4/polyaniline composites enhanced the conversion of organics into methane during anaerobic wastewater treatment

In this study, g-C3N4/PANI was prepared by in situ oxidative polymerization. Graphite-phase carbon nitride (g-C3N4) with surface defects was deposited onto the surface of conductive polyaniline (PANI) to form a p-n heterojunction. This construction aimed to create an efficient heterogeneous catalyst, increasing the surface defect level and active sites of the composite, and augmenting its capability to capture and transfer extracellular electrons under anaerobic conditions. This addresses the challenge of low efficiency in direct interspecies electron transfer between bacteria and archaea during anaerobic digestion for methane production. The results showed that the prepared g-C3N4/PANI increased the CH4 yield and CH4 production rate by 82% and 96%, respectively. Notably, the conductivity and XPS test results showed that the ratio of g-C3N4 to PANI was 0.15, and the composite exhibited favorable conductivity, with a uniform distribution of pyrrolic nitrogen, pyridinic nitrogen, and graphitic nitrogen, each accounting for approximately 30%. Furthermore, g-C3N4/PANI effectively enhanced the metabolic efficiency of intermediate products such as acetate and butyrate. Analysis of the microbial community structure revealed that g-C3N4/PANI led to a significant increase in the abundance of hydrogenotrophic methanogen Methanolinea (from 48% to 64%) and enriched Clostridium (a rise of 1%) with direct interspecies electron transfer capability. Microbial community function analysis demonstrated that the addition of g-C3N4/PANI boosted the activities of key enzymes involved in anaerobic digestion, including phosphate transacetylase (PTA), phospho-butyryl transferase (PTB), and NAD-independent lactate dehydrogenase (NNLD), by 47%, 135%, and 153%, respectively. This acceleration in enzymatic activity promoted the metabolism of acetyl-CoA, butyryl-CoA, and pyruvate. Additionally, the function of ABC transporters was enhanced, thereby improving the efficiency of material and energy exchange among microorganisms.

Electromagnetic Field Drives the Bioelectrocatalysis of γ-Fe2O3-Coated Shewanella putrefaciens CN32 to Boost Extracellular Electron Transfer

The microbial hybrid system modified by magnetic nanomaterials can enhance the interfacial electron transfer and energy conversion under the stimulation of a magnetic field. However, the bioelectrocatalytic performance of a hybrid system still needs to be improved, and the mechanism of magnetic field-induced bioelectrocatalytic enhancements is still unclear. In this work, γ-Fe2O3 magnetic nanoparticles were coated on a Shewanella putrefaciens CN32 cell surface and followed by placing in an electromagnetic field. The results showed that the electromagnetic field can greatly boost the extracellular electron transfer, and the oxidation peak current of CN32@γ-Fe2O3 increased to 2.24 times under an electromagnetic field. The enhancement mechanism is mainly due to the fact that the surface modified microorganism provides an elevated contact area for the high microbial catalytic activity of the outer cell membrane's cytochrome, while the magnetic nanoparticles provide a networked interface between the cytoplasm and the outer membrane for boosting the fast multidimensional electron transport path in the magnetic field. This work sheds fresh scientific light on the rational design of magnetic-field-coupled electroactive microorganisms and the fundamentals of an optimal interfacial structure for a fast electron transfer process toward an efficient bioenergy conversion.

Graphene Fermi Level-Guided Attachment of Single Exoelectrogens and Induced Interfacial Doping

Graphene's exceptional electronic and mechanical properties make it a promising material for bioelectronic applications; however, understanding its interaction with electrogenic bacteria is crucial to harness its full potential. This study investigates the interface between electrogenic bacteria and graphene with Raman spectroscopy by analyzing the distinctive spectral fingerprints to understand electron energy and distribution via this non-destructive and label-free method. We find that the presence of bacteria induces a distinct red-shift in the G peak positions of graphene, indicating electron doping. Correspondingly, the bacteria demonstrate a predilection for attachment on hole-rich sites on the graphene sheet, evidenced by the comparative analysis of pre- and post-spatial Raman mapping, revealing their consistent presence within the hole-doped 2D peak position range of 2673.89-2675.43 cm-1. This affinity of bacteria is due to the overall higher Fermi level (∼4.9 ± 0.2 eV) of these regions, which favors electron transfer. These findings demonstrate the potential of leveraging the graphene's electronic properties in engineering graphene-based biosensors. Tuning graphene's charge carrier concentration would enable the promotion or prevention of bacterial attachment, facilitating capture of specific bacteria or development of antimicrobial surfaces. This approach enables clean, efficient, and accurate study of graphene-based bacterial systems, driving significant advancements and enhancing their performance.

Engineering extracellular electron transfer pathways of electroactive microorganisms by synthetic biology for energy and chemicals production

The excessive consumption of fossil fuels causes massive emission of CO2, leading to climate deterioration and environmental pollution. The development of substitutes and sustainable energy sources to replace fossil fuels has become a worldwide priority. Bio-electrochemical systems (BESs), employing redox reactions of electroactive microorganisms (EAMs) on electrodes to achieve a meritorious combination of biocatalysis and electrocatalysis, provide a green and sustainable alternative approach for bioremediation, CO2 fixation, and energy and chemicals production. EAMs, including exoelectrogens and electrotrophs, perform extracellular electron transfer (EET) (i.e., outward and inward EET), respectively, to exchange energy with the environment, whose rate determines the efficiency and performance of BESs. Therefore, we review the synthetic biology strategies developed in the last decade for engineering EAMs to enhance the EET rate in cell-electrode interfaces for facilitating the production of electricity energy and value-added chemicals, which include (1) progress in genetic manipulation and editing tools to achieve the efficient regulation of gene expression, knockout, and knockdown of EAMs; (2) synthetic biological engineering strategies to enhance the outward EET of exoelectrogens to anodes for electricity power production and anodic electro-fermentation (AEF) for chemicals production, including (i) broadening and strengthening substrate utilization, (ii) increasing the intracellular releasable reducing equivalents, (iii) optimizing c-type cytochrome (c-Cyts) expression and maturation, (iv) enhancing conductive nanowire biosynthesis and modification, (v) promoting electron shuttle biosynthesis, secretion, and immobilization, (vi) engineering global regulators to promote EET rate, (vii) facilitating biofilm formation, and (viii) constructing cell-material hybrids; (3) the mechanisms of inward EET, CO2 fixation pathway, and engineering strategies for improving the inward EET of electrotrophic cells for CO2 reduction and chemical production, including (i) programming metabolic pathways of electrotrophs, (ii) rewiring bioelectrical circuits for enhancing inward EET, and (iii) constructing microbial (photo)electrosynthesis by cell-material hybridization; (4) perspectives on future challenges and opportunities for engineering EET to develop highly efficient BESs for sustainable energy and chemical production. We expect that this review will provide a theoretical basis for the future development of BESs in energy harvesting, CO2 fixation, and chemical synthesis.

Novel insights into carbon nanomaterials enhancing anammox for nitrogen removal: Effects and mechanisms

Carbon nanomaterials (CNMs) possess the properties including large specific surface area, high porosity, and stable chemical structures, presenting significant application advantages in wastewater treatment. Indeed, CNMs are considered to be added to anammox systems to strengthen anammox function, especially to resolve the challenge of anammox technology, i.e., the slow growth rate of anammox bacteria, as well as its high environmental sensitivity. This paper systematically reviews the promotion effects and mechanisms of CNMs on the nitrogen removal performance of anammox system. Among the zero-, one-, and two-dimensional CNMs, two-dimensional CNMs have best promoting effect on the nitrogen removal performance of anammox system due to its excellent conductivity and abundant functional groups. Then, the promotion effects of CNMs on anammox process are summarized from the perspective of anammox activity and bacteria abundance. Furthermore, CNMs not only enhance the anammox process, but also stimulate the coupling of denitrification pathways with anammox, as well as the improvement of system operational stability (alleviating the inhibitions of low temperature and pH fluctuation), thus contributing to the promoted nitrogen removal performance. Essentially, CNMs are capable of facilitating microbial immobilization and electron transfer, which favor to improve the efficiency and stability of anammox process. Finally, this review highlights the gap in knowledge and future work, aiming to provide a deeper understanding of how CNMs can strengthen the anammox system and provide a novel perspective for the engineering of the anammox process.

Enforcing energy consumption promotes microbial extracellular respiration for xenobiotic bioconversion

Extracellular electron transfer (EET) empowers electrogens to catalyse the bioconversion of a wide range of xenobiotics in the environment. Synthetic bioengineering has proven effective in promoting EET output. However, conventional strategies mainly focus on modifications of EET-related genes or pathways, which leads to a bottleneck due to the intricate nature of electrogenic metabolic properties and intricate pathway regulation that remain unelucidated. Herein, we propose a novel EET pathway-independent approach, from an energy manipulation perspective, to enhance microbial EET output. The Controlled Hydrolyzation of ATP to Enhance Extracellular Respiration (CHEER) strategy promotes energy utilization and persistently reduces the intracellular ATP level in Shewanella oneidensis, a representative electrogenic microbe. This approach leads to the accelerated consumption of carbon substrate, increased biomass accumulation and an expanded intracellular NADH pool. Both microbial electrolysis cell and microbial fuel cell tests exhibit that the CHEER strain substantially enhances EET capability. Analysis of transcriptome profiles reveals that the CHEER strain considerably bolsters biomass synthesis and metabolic activity. When applied to the bioconversion of model xenobiotics including methyl orange, Cr(VI) and U(VI), the CHEER strain consistently exhibits enhanced removal efficiencies. This work provides a new perspective and a feasible strategy to enhance microbial EET for efficient xenobiotic conversion.

An extracellular electron transfer enhanced electrochemiluminescence aptasensor for Escherichia coli analysis

As a crucial indicator in food and water safety testing, the detection of Escherichia coli plays a significant role in maintaining environmental sanitation and promoting public health. Herein, based on the electrochemical activity characteristics of E. coli, we established an enhanced electrochemiluminescence aptasensor for E. coli analysis. This study presents a new method for accurate identification by utilizing a double aptamer recognition system. Specifically, a nano-cadmium sulfide (CdS) modified aptamer was used for primary labeling, while a second aptamer was immobilized on a graphene/chitosan composite electrode for re-capture. The use of two aptamers improves the accuracy of the identification process. Furthermore, the application of an electrode potential facilitates continuous electron transfer between the electrode and electrochemically active microorganisms, resulting in an enhanced electroluminescence signal in relation to the metabolic status. This strategy possesses better sensitivity, accuracy, and stability, demonstrating its potential for E. coli analysis.

Water quality improvement and consequent N2O emission reduction in hypoxic freshwater utilizing green oxygen-carrying biochar

Declines in dissolved oxygen (DO) levels in aquatic systems worldwide negatively influence biodiversity, nutrient biogeochemistry, drinking water quality, and greenhouse gas emission. As a response, oxygen-carrying dual-modified sediment-based biochar (O-DM-SBC) as a green and sustainable emerging material was utilized for simultaneous hypoxia restoration, water quality improvement, and greenhouse gas reduction. Column incubation experiments were carried out using the water and sediment samples from a tributary of the Yangtze River. The application of O-DM-SBC effectively increased the DO concentration from ~1.99 mg/L to ~6.44 mg/L and decreased the concentrations of TN and NH₄⁺-N by 61.1 % and 78.3 %, respectively, during the 30-day incubation period. Moreover, the N₂O emission was apparently inhibited by O-DM-SBC with a 50.2 % decrease in daily flux under the functional coupling of biochar (SBC) and oxygen nanobubbles (ONBs). Path analysis supported that the treatments (SBC, modification, and ONBs) had joint effects on N₂O emission by changing the concentration and composition of dissolved inorganic nitrogen (e.g., NH₄⁺-N, NO₂^--N and NO₃^--N). The nitrogen-transforming bacteria were found to be significantly promoted by O-DM-SBC at the end of the incubation, while the archaeal community seemed to be more active in the SBC groups without ONB, confirming their different mechanisms. The PICRUSt2 prediction results revealed that most nitrogen metabolism genes including nitrification (i.e., amoABC), denitrification (i.e., nirK and nosZ), and assimilatory nitrate reduction (i.e., nirB and gdhA) were largely enriched in O-DM-SBC, indicating the active nitrogen-cycling network was established, thus achieving simultaneous nitrogen pollution control and N₂O emission reduction. Our findings not only confirm the beneficial effect of O-DM-SBC amendment on nitrogen pollution control and N₂O emission mitigation in hypoxic freshwater, but also contribute to a more comprehensive understanding of the effect of oxygen-carrying biochar on nitrogen cycling microbial communities.

Evidence for the feasibility of transmembrane proton gradient regulating oxytetracycline extracellular biodegradation mediated by biosynthesized palladium nanoparticles

Extracellular biodegradation is a promising technology for removing antibiotics and repressing the spread of resistance genes, but the strategy is limited by the low extracellular electron transfer (EET) efficiency of microorganisms. In this work, biogenic Pd⁰ nanoparticles (bio-Pd⁰) were introduced in cells in situ to enhance oxytetracycline (OTC) extracellular degradation and the effects of transmembrane proton gradient (TPG) on EET and energy metabolism mediated by bio-Pd⁰ were investigated. The results indicated that the intracellular OTC concentration gradually decreased with increase in pH due to the simultaneous decreases of OTC adsorption and TPG-dependent OTC uptake. On the contrary, the efficiency of OTC biodegradation mediated by bio-Pd⁰@B. megaterium showed a pH-dependent increase. The negligible intracellular OTC degradation, the high dependence of OTC biodegradation on respiration chain and the results on enzyme activity and respiratory chain inhibition experiments showed that NADH-dependent (rather than FADH₂-dependent) EET process mediated by substrate-level phosphorylation modulated OTC biodegradation due to high energy storage and proton translocation capacity. Moreover, the results showed that altering TPG is an efficient approach to improve EET efficiency, which can be attributed to the increased NADH generation by the TCA cycle, enhanced transmembrane electron output efficiency (as evidenced by increased intracellular electron transfer system (IETS) activity, the negative shift of onset potential, and enhanced one-electron transfer through bound flavin) and stimulation of substrate-level phosphorylation energy metabolism catalyzed by succinic thiokinase (STH) under low TPG conditions. The results of structural equation model that OTC biodegradation was directly and positively modulated by the net outward proton flux as well as STH activity, and indirectly regulated by TPG through NADH level and IETS activity confirmed the previous findings. This study provides a new perspective for engineering microbial EET and application of bioelectrochemistry processes in bioremediation.

In Situ Enhanced Yields of Microbial Nanowires: The Key Role of Environmental Stress

The conductive microbial nanowires of Geobacter sulfurreducens serve as a model for long-range extracellular electron transfer (EET), which is considered a revolutionary "green" nanomaterial in the fields of bioelectronics, renewable energy, and bioremediation. However, there is no efficient pathway to induce microorganisms to express a large amount of microbial nanowires. Here, several strategies have been used to successfully induce the expression of microbial nanowires. Microbial nanowire expression was closely related to the concentration of electron acceptors. The microbial nanowire was around 17.02 μm in length, more than 3 times compared to its own length. The graphite electrode was used as an alternative electron acceptor by G. sulfurreducens, which obtained a fast start-up time of 44 h in microbial fuel cells (MFCs). Meanwhile, Fe(III) citrate-coated sugarcane carbon and biochar were prepared to test the applicability of these strategies in the actual microbial community. The unsatisfied EET efficiency between c-type cytochrome and extracellular insoluble electron receptors promoted the expression of microbial nanowires. Hence, microbial nanowires were proposed to be an effective survival strategy for G. sulfurreducens to cope with various environmental stresses. Based on this top-down strategy of artificially constructed microbial environmental stress, this study is of great significance for exploring more efficient methods to induce microbial nanowires expression.

The material-microorganism interface in microbial hybrid electrocatalysis systems

This review presents a comprehensive summary of the material-microorganism interface in microbial hybrid electrocatalysis systems. Microbial hybrid electrocatalysis has been developed to combine the advantages of inorganic electrocatalysis and microbial catalysis. However, electron transfer at the interfaces between microorganisms and materials is a very critical issue that affects the efficiency of the system. Therefore, this review focuses on the electron transfer at the material-microorganism interface and the strategies for building efficient microorganism and material interfaces. We begin with a brief introduction of the electron transfer mechanism in both the bioanode and biocathode of bioelectrochemical systems to understand the material-microorganism interface. Next, we summarise the strategies for constructing efficient material-microorganism interfaces including material design and modification and bacterial engineering. We also discuss emerging studies on the bio-inorganic hybrid electrocatalysis system. Understanding the interface between electrode/active materials and the microorganisms, especially the electron transfer processes, could help to drive the evolution of material-microorganism hybrid electrocatalysis systems towards maturity.

Exploitation of renewable energy sources for water desalination using biological tools

The emerging impacts of climate change and the growing world population are driving the demand for more food resources and creating an urgent need for new water resources. About 93% of Earth's surface is made up of water bodies, mainly oceans. Seawater attracted a lot of attention in order to be used as a sustainable source of usable water. However, an essential step in harnessing this source of water is desalination. Utilizing renewable sources of energy, biology offers several tools for removal of salts. This article for the first time reviews all currently available biological water desalination tools and compares their efficiency with industrial systems. Bacteria are employed as electrical power generators to provide the energy needed for desalination in microbial desalination cells. Its salt removal efficiency varied from 0.8 to 30 g/L/d. Many strains of algal cells can grow in high concentrations of salts, adsorb and accumulate it inside the cell, and therefore could be used without prior treatment for seawater desalination. This biological tool can yield salt removal efficiency of 0.4-5 g/L/d. Biopolymers are also used for treatment of seawater through enhancing water evaporation as a component of solar steam generators. Despite significant advances in biological water desalination, further modifications and improvements are still needed to make its use sustainable and cost-effective.

Application of Bioelectrochemical Systems and Anaerobic Additives in Wastewater Treatment: A Conceptual Review

The interspecies electron transfer (IET) between microbes and archaea is the key to how the anaerobic digestion process performs. However, renewable energy technology that utilizes the application of a bioelectrochemical system together with anaerobic additives such as magnetite-nanoparticles can promote both direct interspecies electron transfer (DIET) as well as indirect interspecies electron transfer (IIET). This has several advantages, including higher removal of toxic pollutants present in municipal wastewater, higher biomass to renewable energy conversion, and greater electrochemical efficiencies. This review explores the synergistic influence of bioelectrochemical systems and anaerobic additives on the anaerobic digestion of complex substrates such as sewage sludge. The review discussions present the mechanisms and limitations of the conventional anaerobic digestion process. In addition, the applicability of additives in syntrophic, metabolic, catalytic, enzymatic, and cation exchange activities of the anaerobic digestion process are highlighted. The synergistic effect of bio-additives and operational factors of the bioelectrochemical system is explored. It is elucidated that a bioelectrochemical system coupled with nanomaterial additives can increase biogas-methane potential compared to anaerobic digestion. Therefore, the prospects of a bioelectrochemical system for wastewater require research attention.

Microbial electrosynthesis: carbonaceous electrode materials for CO2 conversion

Microbial electrosynthesis (MES) is a sustainable approach to address greenhouse gas (GHG) emissions using anthropogenic carbon dioxide (CO₂) as a building block to create clean fuels and highly valuable chemicals. The efficiency of MES-based CO₂ conversion is closely related to the performance of electrode material and, in particular, the cathode for which carbonaceous materials are frequently used. Compared to expensive metal electrodes, carbonaceous materials are biocompatible with a high specific surface area, wide range of possible morphologies, and excellent chemical stability, and their use can maximize the growth of bacteria and enhance electron transfer rates. Examples include MES cathodes based on carbon nanotubes, graphene, graphene oxide, graphite, graphite felt, graphitic carbon nitride (g-C₃N₄), activated carbon, carbon felt, carbon dots, carbon fibers, carbon brushes, carbon cloth, reticulated vitreous carbon foam, MXenes, and biochar. Herein, we review the state-of-the-art MES, including thermodynamic and kinetic processes that underpin MES-based CO₂ conversion, as well as the impact of reactor type and configuration, selection of biocompatible electrolytes, product selectivity, and the use of novel methods for stimulating biomass accumulation. Specific emphasis is placed on carbonaceous electrode materials, their 3D bioprinting and surface features, and the use of waste-derived carbon or biochar as an outstanding material for further improving the environmental conditions of CO₂ conversion using carbon-hungry microbes and as a step toward the circular economy. MES would be an outstanding technique to develop rocket fuels and bioderived products using CO₂ in the atmosphere for the Mars mission.

Novel nitrogen-doped biochar supported magnetite promotes anaerobic digestion: Material characterization and metagenomic analysis

Although different conductive materials have been applied to anaerobic digestion, there has not been a material that can really combine their merits and make up their shortcoming from each other. In this study, a novel nitrogen-doped biochar supported magnetite (Fe₃O₄@N-BC) was synthesized. Various material characterizations confirmed that nitrogen atoms were successful doped into the biochar and magnetite precipitated on its surface. 5 g/L Fe₃O₄@N-BC achieved the highest promotion of cumulative CH₄ production by 1.75 times compared with the blank group. Further metagenomic analysis revealed that Fe₃O₄@N-BC could increase the gene abundances of pilA, MmcA, Fpo, Rnf and HdrEd in bacteria Clotridium, Pseudomonas and Syntrophomonas and archaea Methanosarcina. Redundancy analysis showed that it was electrical conductivity and electron exchange capacity that were the key physicochemical characteristics for Fe₃O₄@N-BC to facilitating direct interspecies electron transfer. This study provides a reference for future conductive material synthesis and its application for anaerobic digestion.

Functional Nanomaterial-Modified Anodes in Microbial Fuel Cells: Advances and Perspectives

Microbial fuel cell (MFC) is a promising approach that could utilize microorganisms to oxidize biodegradable pollutants in wastewater and generate electrical power simultaneously. Introducing advanced anode nanomaterials is generally considered as an effective way to enhance MFC performance by increasing bacterial adhesion and facilitating extracellular electron transfer (EET). This review focuses on the key advances of recent anode modification materials, as well as the current understanding of the microbial EET process occurring at the bacteria-electrode interface. Based on the difference in combination mode of the exoelectrogens and nanomaterials, anode surface modification, hybrid biofilm construction and single-bacterial surface modification strategies are elucidated exhaustively. The inherent mechanisms may help to break through the performance output bottleneck of MFCs by rational design of EET-related nanomaterials, and lead to the widespread application of microbial electrochemical systems.

Enhanced transmembrane electron transfer in Shewanella oneidensis MR-1 using gold nanoparticles for high-performance microbial fuel cells

Low efficiency of extracellular electron transfer (EET) is a major bottleneck in developing high-performance microbial fuel cells (MFCs). Herein, we construct Shewanella oneidensis MR-1@Au for the bioanode of MFCs. Through performance recovery experiments of mutants, we proved that abundant Au nanoparticles not only tightly covered the bacteria surface, but were also distributed in the periplasm and cytoplasm, and even embedded in the outer and inner membranes of the cell. These Au nanoparticles could act as electron conduits to enable highly efficient electron transfer between S. oneidensis MR-1 and electrodes. Strikingly, the maximum power density of the S. oneidensis MR-1@Au bioanode reached up to 3749 mW m^-2, which was 17.4 times higher than that with the native bacteria, reaching the highest performance yet reported in MFCs using Au or Au-based nanocomposites as the anode. This work elucidates the role of Au nanoparticles in promoting transmembrane and extracellular electron transfer from the perspective of molecular biology and electrochemistry, while alleviating bottlenecks in MFC performances.

Biodegradation of Graphene Oxide by Insects (Tenebrio molitor Larvae): Role of the Gut Microbiome and Enzymes

Biodegradation of graphene materials is critical for understanding their environmental process and fate. Thus, biodegradation and mineralization of graphene oxide (GO) by an insect (yellow mealworms, Tenebrio molitor larvae) were investigated. Twenty mealworms could eat up a piece of GO film (1.5 × 1.5 cm) in 15 days. The ingested GO film underwent degradation, and the residual GO sheets were observed in the frass. Raman imaging confirmed that the residual GO (I_D/I_G, 1.16) was more defective than the pristine GO film (I_D/I_G, 0.95). ¹⁴C analysis showed that GO sheets were partially mineralized into CO₂ (0.26%) and assimilated into biomass compositions (e.g., lipid and protein) (0.36%). Gut microbes and extracellular enzymes in yellow mealworms played crucial roles in GO degradation, and the predominant gut microbes for GO biodegradation were identified as Enterobacteriaceae bacteria (e.g., Escherichia-Shigella sp.). Two biodegradation products belonging to hydroxylated or carboxylated aromatic compounds were formed with the assistance of electrons and hydroxyl radicals in mealworm guts. These findings are useful for better understanding the environmental and biological fate of graphene materials.

Biohydrogen production and purification: Focusing on bioelectrochemical systems

Innovative technologies on green hydrogen production become significant as the hydrogen economy has grown globally. Biohydrogen is one of green hydrogen production methods, and microbial electrochemical cells (MECs) can be key to biohydrogen provision. However, MECs are immature for biohydrogen technology due to several limitations including extracellular electron transfer (EET) engineering. Fundamental understanding of EET also needs more works to accelerate MEC commercialization. Interestingly, studies on biohydrogen gas purification are limited although biohydrogen gas mixture requires complex purification for use. To facilitate an MEC-based biohydrogen technology as the green hydrogen supply this review discussed EET kinetics, engineering of EET and direct interspecies electron transfer associated with hydrogen yield and the application of advanced molecular biology for improving EET kinetics. Finally, this article reviewed biohydrogen purification technologies to better understand purification and use appropriate for biohydrogen, focusing on membrane separation.

Enrichment of sulfur-oxidizing bacteria using S-doped NiFe2O4 nanosheets as the anode in microbial fuel cell enhances power production and sulfur recovery

Microbial fuel cells (MFCs) have great promise for power generation by oxidizing organic wastewater, yet the challenge to realize high efficiency in simultaneous energy production and resource recovery remains. In this study, we designed a novel MFC anode by synthesizing S-doped NiFe₂O₄ nanosheet arrays on carbon cloth (S10-NiFe₂O₄@CC) to build a three-dimensional (3D) hierarchically porous structure, with the aim to regulate the microbial community of sulfur-cycling microbes in order to enhance power production and elemental sulfur (S⁰) recovery. The S10-NiFe₂O₄@CC anode obtained a faster start-up time of 2 d and the highest power density of 4.5 W/m² in acetate-fed and mixed bacteria-based MFCs. More importantly, sulfide removal efficiency (98.3 %) (initial concentration of 50 mg/L S^2-) could be achieved within 3 d and sulfur (S₈) could be produced. Microbial community analysis revealed that the S10-NiFe₂O₄@CC anode markedly enriched sulfur-oxidizing bacteria (SOB) and promoted enrichment of SOB and sulfate-reducing bacteria (SRB) in the bulk solution as well, leading to the enhancement of power generation and S⁰ recovery. This study shows how carefully designing and optimizing the composition and structure of the anode can lead to the enrichment of a multifunctional microbiota with excellent potential for sulfide removal and resource recovery.

Enhancing Microbial Electron Transfer Through Synthetic Biology and Biohybrid Approaches: Part II : Combining approaches for clean energy

It is imperative to develop novel processes that rely on cheap, sustainable and abundant resources whilst providing carbon circularity. Microbial electrochemical technologies (MET) offer unique opportunities to facilitate the conversion of chemicals to electrical energy or vice versa by harnessing the metabolic processes of bacteria to valorise a range of waste products including greenhouse gases (GHGs). Part I (1) introduced the EET pathways, their limitations and applications. Here in Part II, we outline the strategies researchers have used to modulate microbial electron transfer, through synthetic biology and biohybrid approaches and present the conclusions and future directions.

3D Hierarchical Co8FeS8-FeCo2O4/N-CNTs@CF with an Enhanced Microorganisms-Anode Interface for Improving Microbial Fuel Cell Performance

Microbial fuel cells (MFCs) are promising ecofriendly techniques for harvesting bioenergy from organic and inorganic matter. Currently, it is challenging to design MFC anodes with favorable microorganism attachment and fast extracellular electron transfer (EET) rate for high MFC performance. Here we prepared N-doped carbon nanotubes (NCNTs) on carbon felt (CF) and used it as a support for growing hierarchical Co₈FeS₈-FeCo₂O₄/NCNTs core-shell nanostructures (FeCo/NCNTs@CF). We observed improved wettability, specific areal capacitance, and diffusion coefficient, as well as small charge transfer resistance compared with bare CF. MFCs equipped with FeCo/NCNTs@CF displayed a power density of 3.04 W/m² and COD removal amount of 221.0 mg/L/d, about 47.6 and 290.1% improvements compared with that of CF. Biofilm morphology and 16s rRNA gene sequence analysis proved that our anode facilitated the enrichment growth of exoelectrogens. Flavin secretion was also promoted on our hierarchical elelctrode, effectively driving the EET process. This work disclosed that hierarchical nanomaterials modified electrode with tailored physicochemical properties is a promising platform to simultaneously enhance exoelectrogen attachment and EET efficiency for MFCs.

Molecular Trade-Offs between Lattice Oxygen and Oxygen Vacancy Drive Organic Pollutant Degradation in Fungal Biomineralized Exoskeletons

Fungal-mineral interactions can effectively alleviate cellular stress from organic pollutants, the production of which are expected to rapidly increase owing to the Earth moving into an unprecedented geological epoch, the Anthropocene. The underlying mechanisms that may enable fungi to combat organic pollution during fungal-mineral interactions remain unclear. Inspired by the natural fungal sporulation process, we demonstrate for the first time that fungal biomineralization triggers the formation of an ultrathin (hundreds of nanometers thick) exoskeleton, enriched in nanosized iron (oxyhydr)oxides and biomolecules, on the hyphae. Mapped biochemical composition of this coating at a subcellular scale via high spatial resolution (down to 50 nm) synchrotron radiation-based techniques confirmed aromatic C, C-N bonds, amide carbonyl, and iron (oxyhydr)oxides as the major components of the coatings. This nanobiohybrid system appeared to impart a strong (×2) biofunctionality for fungal degradation of bisphenol A through altering molecular-level trade-offs between lattice oxygen and oxygen vacancy. Together, fungal coatings could act as "artificial spores", which enable fungi to combat physical and chemical stresses in natural environments, providing crucial insights into fungal biomineralization and coevolution of the Earth's lithosphere and biosphere.

Network-Based Redox Communication Between Abiotic Interactive Materials

Recent observations that abiotic materials can engage in redox-based interactive communication motivates the search for new redox-active materials. Here we fabricated a hydrogel from a four-armed thiolated polyethylene glycol (PEG-SH) and the bacterial metabolite, pyocyanin (PYO). We show that: (i) the PYO-PEG hydrogel is reversibly redox-active; (ii) the molecular-switching and directed electron flow within this PYO-PEG hydrogel requires both a thermodynamic driving force (i.e., potential difference) and diffusible electron carriers that serve as nodes in a redox network; (iii) this redox-switching and electron flow is controlled by the redox network’s topology; and (iv) the ability of the PYO-PEG hydrogel to “transmit” electrons to a second insoluble redox-active material (i.e., a catechol-PEG hydrogel) is context-dependent (i.e., dependent on thermodynamic driving forces and appropriate redox shuttles). These studies provide an experimental demonstration of important features of redox-communication and also suggest technological opportunities for the fabrication of interactive materials.

•

Thiol-pyocyanin reaction was used to create a redox-active and interactive hydrogel

•

The electron flow and molecular switching requires diffusible mediators

•

These mediators and pyocyanin hydrogel serve as “nodes” in a redox reaction network

•

The networked flow of electrons between two separated hydrogels is reported

High-performance free-standing microbial fuel cell anode derived from Chinese date for enhanced electron transfer rates

Traditional anode materials have disadvantages like low specific surface area and poor electrical conductivity. Herein, carbonized Chinese dates (CCD) were synthesized as microbial fuel cells (MFC) anodes. The obtained materials exhibited excellent biocompatibility with fast start-up (within one day) and charge transfer (R_ct 4.0 Ω). Their porous structure allows efficient ion transport and microbial community succession, favorable for long-term operation. The biomass analysis shows that CCD anodes can load higher weight of biomass. High-throughput sequencing (16S rRNA) discovered that CCD anode can enrich Geobacter spp., with highest abundance of 73.4%, much higher than carbon felt (CF, 39.2%). Benefit from these properties, the MFC with CCD anodes possess a maximum power density of 12.17 W m^-3 (1.62 times of commercial carbon felt). In all, the CCD anode exhibits high performance with low cost and easy fabrication, certificating it a promising candidate for an ideal MFC anode material.

Advances in cathode designs and reactor configurations of microbial electrosynthesis systems to facilitate gas electro-fermentation

In gas fermentation, a range of chemolithoautotrophs fix single-carbon (C1) gases (CO₂ and CO) when H₂ or other reductants are available. Microbial electrosynthesis (MES) enables CO₂ reduction by generating H₂ or reducing equivalents with the sole input of renewable electricity. A combined approach as gas electro-fermentation is attractive for the sustainable production of biofuels and biochemicals utilizing C1 gases. Various platform compounds such as acetate, butyrate, caproate, ethanol, butanol and bioplastics can be produced. However, technological challenges pertaining to the microbe-material interactions such as poor gas-liquid mass transfer, low biomass and biofilm coverage on cathode, low productivities still exist. We are presenting a review on latest developments in MES focusing on the configuration and design of cathodes that can address the challenges and support the gas electro-fermentation. Overall, the opportunities for advancing CO and CO₂-based biochemicals and biofuels production in MES with suitable cathode/reactor design are prospected.

Electrogenic Bacteria Promise New Opportunities for Powering, Sensing, and Synthesizing

Considerable research efforts into the promises of electrogenic bacteria and the commercial opportunities they present are attempting to identify potential feasible applications. Metabolic electrons from the bacteria enable electricity generation sufficient to power portable or small-scale applications, while the quantifiable electric signal in a miniaturized device platform can be sensitive enough to monitor and respond to changes in environmental conditions. Nanomaterials produced by the electrogenic bacteria can offer an innovative bottom-up biosynthetic approach to synergize bacterial electron transfer and create an effective coupling at the cell-electrode interface. Furthermore, electrogenic bacteria can revolutionize the field of bioelectronics by effectively interfacing electronics with microbes through extracellular electron transfer. Here, these new directions for the electrogenic bacteria and their recent integration with micro- and nanosystems are comprehensively discussed with specific attention toward distinct applications in the field of powering, sensing, and synthesizing. Furthermore, challenges of individual applications and strategies toward potential solutions are provided to offer valuable guidelines for practical implementation. Finally, the perspective and view on how the use of electrogenic bacteria can hold immeasurable promise for the development of future electronics and their applications are presented.

Facet-engineered hematite boosts microbial electrogenesis by synergy of promoting electroactive biofilm formation and extracellular electron transfer

Hematite has been proven to be an excellent material for enhancing extracellular electron transfer (EET) in microbial bioelectrochemical systems (BESs). However, the effect of hematite with different exposed facets on microbial EET remains unclear. Here, we synthesized two types of hematite nanoparticles with high {100} and {001} facet exposure (Hem_{100} and Hem_{001}), respectively, which were coated on ITO electrode to stimulate the microbial EET in the BESs. The results showed that the maximum biocurrent density of commercial hematite nanoparticles (Hem_NPs), Hem_{100} and Hem_{001} electrodes reached 73.33 ± 5.68, 129.33 ± 9.12 and 287.00 ± 19.89 μA cm^-2 from three replicates of each treatment, respectively. The current generation achieved from the Hem_{001} electrode was nearly 199-times higher than that of the blank ITO electrode (1.44 ± 0.10 μA cm^-2). The electrochemical measurements showed that the lowest charge transfer resistance (R_ct) was observed for the Hem_{001}, and the promoted biofilm formation and EPS secretion on the Hem_{001} electrode were also revealed, which could contribute the high performance of this electrode. Moreover, metagenomic analysis revealed that Hem_{001} might facilitate the microbial EET by stimulating the expression of genes related to cytochrome c and conductive nanowires. This study not only provides a new strategy to enhance microbial electrogenesis but also expands the knowledge of the effect of facet on microbial EET, helping to develop more efficient electrode materials in the future.

Promoting biomethane production from propionate with Fe2O3@carbon nanotubes composites

Using a batch anaerobic system constructed with 60 mL serum bottles, potential of a composite material with Fe₂O₃ nanoparticles decorated on carbon nanotubes (CNTs) to enhance biomethane production was investigated. The composites (Fe₂O₃@CNTs) with well dispersed Fe₂O₃ nanoparticles (4.5 nm) were fabricated by a facile thermal decomposition method in a muffle furnace under nitrogen atmosphere. Compared with Fe₂O₃, Fe₂O₃@CNTs showed a large specific surface area and good electrical conductivity. Supplementation of Fe₂O₃@CNTs to the propionate-degrading enrichments enhanced the methane production rate, which was 10.4-fold higher than that in the control experiment without material addition. The addition of Fe₂O₃@CNTs also not only showed a clearly electrochemical response to flavin and cytochrome C, but also reduced the electron transfer resistance when compared to the control. Comparative analysis showed that Fe₂O₃ in Fe₂O₃@CNTs played a key role in initiating electrochemical response and triggering rapid methane production, while CNTs functioned as rapid electron conduits to facilitate electron transfer from iron-reducing bacteria (e.g., Acinetobacter, Syntrophomonas, and Geobacter) to methanogens (e.g. Methanosarcina).

In situ fabrication of gold nanoparticles into biocathodes enhance chloramphenicol removal

The development of highly conductive biofilms is a key strategy to enhance antibiotic removal in bioelectrochemical systems (BESs) with biocathodes. In this study, Au nanoparticles (Au-NPs) were in situ fabricated in a biocathode (Au biocathode) to enhance the removal of chloramphenicol (CAP) in BESs. The concentration of Au(III) was determined to be 5 mg/L. CAP was effectively removed in the BES containing a Au biocathode with a removal percentage of 94.0% within 48 h; this result was 1.8-fold greater than that obtained using a biocathode without Au-NPs (51.7%). The Au-NPs significantly reduced the charge transfer resistance and promoted the electrochemical activity of the biocathode. In addition, the Au biocathode showed a specifical enrichment of Dokdonella, Bosea, Achromobacter, Bacteroides and Petrimonas, all of which are associated with electron transfer and contaminant degradation. This study provides a new strategy for enhancing CAP removal in BESs through a simple and eco-friendly electrode design.

Advances in interfacial engineering for enhanced microbial extracellular electron transfer

The extracellular electron transfer (EET) efficiency between electroactive microbes (EAMs) and electrode is a key factor determining the development of microbial electrochemical technology (MET). Currently, the low EET efficiency of EAMs limits the application of MET in the fields of organic matter degradation, electric energy production, seawater desalination, bioremediation and biosensing. Enhancement of the interaction between EAMs and electrode by interfacial engineering methods brings bright prospects for the improvement of the EET efficiency of EAMs. In view of the research in recent years, this mini-review systematically summarizes various interfacial engineering strategies ranging from electrode surface modification to hybrid biofilm formation, then to single cell interfacial engineering and intracellular reformation for promoting the electron transfer between EAMs and electrode, focusing on the applicability and limitations of these methodologies. Finally, the possible key directions, challenges and opportunities for future interfacial engineering to strengthen the microbial EET are proposed in this mini-review.

Fungal-Mineral Interactions Modulating Intrinsic Peroxidase-like Activity of Iron Nanoparticles: Implications for the Biogeochemical Cycles of Nutrient Elements and Attenuation of Contaminants

Fungal-mediated extracellular reactive oxygen species (ROS) are essential for biogeochemical cycles of carbon, nitrogen, and contaminants in terrestrial environments. These ROS levels may be modulated by iron nanoparticles that possess intrinsic peroxidase (POD)-like activity (nanozymes). However, it remains largely undescribed how fungi modulate the POD-like activity of the iron nanoparticles with various crystallinities and crystal facets. Using well-controlled fungal-mineral cultivation experiments, here, we showed that fungi possessed a robust defect engineering strategy to modulate the POD-like activity of the attached iron minerals by decreasing the catalytic activity of poorly ordered ferrihydrite but enhancing that of well-crystallized hematite. The dynamics of POD-like activity were found to reside in molecular trade-offs between lattice oxygen and oxygen vacancies in the iron nanoparticles, which may be located in a cytoprotective fungal exoskeleton. Together, our findings unveil coupled POD-like activity and oxygen redox dynamics during fungal-mineral interactions, which increase the understanding of the catalytic mechanisms of POD-like nanozymes and microbial-mediated biogeochemical cycles of nutrient elements as well as the attenuation of contaminants in terrestrial environments.

Ultrasonic pre-treatment of Bacillus velezensis for improved electrogenic response in a single chambered microbial fuel cell

Various microbial strains and techniques are being used to improve power production in microbial fuel cells. Cow dung is a peculiar source of anaerobic and micro-aerophilic organisms that were employed in this study to isolate exo-electrogenic microorganisms. To validate their exo-electrogenic nature, all eight visually distinct bacterial single-cell colonies were tested using the ferrocyanide reduction assay, which resulted in the selection of one bacterial strain AD1-ELB with the ability to reduce ferrocyanide for further biochemical, physiological and electrochemical characterization. The selected strain AD1-ELB was identified as Bacillus velezensis by 16 s rRNA gene sequencing. When used in a single-chambered MFC, the isolated AD1-ELB strain produced a maximum open-circuit voltage of 455 mV with a maximum current density of 51.78 µA/cm² and maximum power density of 4.33 µW/cm² on the 16th day. Bacillus velezensis AD1-ELB strain was treated with low-frequency ultrasound (40 kHz) for 1, 2, 3, 4, and 5 min to assess the effect of ultrasonic pre-treatment on an isolated pure culture-based microbial fuel cell. A 3-min exposure to low-frequency ultrasonic therapy resulted in an increase in maximum power of 4.33 µW/cm² with a current density of 51.78 µA/cm² in the MFC, which decreases significantly after 4 and 5 min. Thus, the overall power density achieved was 1.89 times greater than in MFCs with untreated strain. These findings support the use of low-frequency ultrasonic stimulation to improve the performance of microbial fuel cell devices and are restricted to the pure, single-cell strain AD1-ELB, with the potential for variation if some other isolated strain is utilized, hence requiring further study to determine its relative variations.

A silver assist for microbial fuel cell power

[Figure: see text].