In Search of Excellence: Convex versus Concave Noble Metal Nanostructures for Electrocatalytic Applications

Recent Progress in the Application of Ion Beam Technology in the Modification and Fabrication of Nanostructured Energy Materials

The development of green, renewable energy conversion and storage systems is an urgent task to address the energy crisis and environmental issues in the future. To achieve high performance, stable, and safe operation of energy conversion and storage systems, energy materials need to be modified and fabricated through rationalization. Among various modification and fabrication strategies, ion beam technology has been widely used to introduce various defects/dopants into energy materials and fabricate various nanostructures, where the structure, composition, and property of prefabricated materials can be further accurately tailored to achieve better performance. In this paper, we review the recent progress in the application of ion beam technology in material modification and fabrication, focusing on nanostructured energy materials for energy conversion and storage including photo- (electro-) water splitting, batteries (solar cells, fuel cells, and metal-ion batteries), supercapacitors, thermoelectrics, and hydrogen storage. This review first provides a brief basic overview of ion beam technology and describes the classification and technological advantages of ion beam technology in the modification and fabrication of materials. Then, modification of energy materials by ion beams is reviewed mainly concerning doping and defect introduction. Fabrication of energy materials is also discussed mainly in terms of heterojunctions, nanoparticles, nanocavities, and other nanostructures. In particular, we emphasize the advantages of ion beam technology in improving the performance of energy materials. Finally, we point out our understanding of challenges and future perspectives in applying ion beam technology for the modification and fabrication of energy materials.

A MXene@AgAu@PDA nanoplatform loaded with AgAu nanocages for enhancing catalytic activity and antibacterial performance

With the rapid development of social industrialization, environmental problems seriously threaten people's health, especially water pollution. Therefore, there is an urgent need to construct a multifunctional nanoplatform for different scenarios. Two-dimensional MXene@AgAu@PDA nanosheets loaded with AgAu bimetallic nanocages have been prepared by a one-step method. First, the in situ generated MXene@Ag is used as an auxiliary template, and then HAuCl4 and dopamine are added for in situ redox-oxidizing polymerization reactions to obtain AgAu catalytic nanocages and the protective polydopamine (PDA) layer which can improve the stability and biocompatibility. MXene and PDA have excellent photothermal conversion ability while hollow AgAu nanocages have strong absorption in the near-infrared region and a local surface plasmonic resonance effect. In comparison to the catalytic reaction rates under dark and room temperature conditions, the catalytic kinetic rate of MXene@AgAu@PDA nanosheets under near-infrared irradiation increases from 0.13 to 0.69 min-1 mg-1. Density functional theory (DFT) is used to study the electron transfer behavior between AgAu nanocages and MXene nanosheets, and the mechanism of the enhanced catalytic reaction rate is analyzed. Besides, due to its Ag ions and photothermal coupling antibacterial properties, 40 μg mL-1 MXene@AgAu@PDA nanosheets inactivates nearly all E. coli and S. aureus after irradiation with near-infrared light for 6 min.

NaCl template-assisted construction of a CoP-MoP heterostructured electrocatalyst for electrocatalytic nitrogen reduction

The electrocatalytic nitrogen reduction reaction (NRR) to ammonia is a promising technology to store renewable energy and mitigate greenhouse gas emissions. However, it usually suffers from low ammonia yield and selectivity because of the lack of efficient electrocatalysts. Herein, we report that the construction of metal phosphide heterojunctions is an efficient strategy for NRR activity enhancement. A CoP-MoP heterojunction electrocatalyst, which is fabricated by a facile NaCl template-assisted strategy, exhibits a favorable ammonia yield rate of 77.8 μg h-1 mgcat-1 (38.9 μg h-1 cm-2) and a high faradaic efficiency of 11.16% at -0.50 V versus the reversible hydrogen electrode. The high NRR electrocatalytic activity can be attributed to the electronic coupling effects and interfacial synergistic effects of CoP and MoP at the heterojunction interface, which accelerates the electron transfer rate. Moreover, Mo doping changes the d-band centers of metal sites on the CoP surface, which is conducive to N2 adsorption and promotes N2* adsorption in the competition of occupying active sites, thus inhibiting the HER. This work manifests the high potential of phosphide electrocatalysts and opens an alternative route toward NRR electrocatalysis.

Theory of Anisotropic Metal Nanostructures

A significant challenge in the development of functional materials is understanding the growth and transformations of anisotropic colloidal metal nanocrystals. Theory and simulations can aid in the development and understanding of anisotropic nanocrystal syntheses. The focus of this review is on how results from first-principles calculations and classical techniques, such as Monte Carlo and molecular dynamics simulations, have been integrated into multiscale theoretical predictions useful in understanding shape-selective nanocrystal syntheses. Also, examples are discussed in which machine learning has been useful in this field. There are many areas at the frontier in condensed matter theory and simulation that are or could be beneficial in this area and these prospects for future progress are discussed.

Mesoporous Pt@Pt-skin Pt3Ni core-shell framework nanowire electrocatalyst for efficient oxygen reduction

The design of Pt-based nanoarchitectures with controllable compositions and morphologies is necessary to enhance their electrocatalytic activity. Herein, we report a rational design and synthesis of anisotropic mesoporous Pt@Pt-skin Pt₃Ni core-shell framework nanowires for high-efficient electrocatalysis. The catalyst has a uniform core-shell structure with an ultrathin atomic-jagged Pt nanowire core and a mesoporous Pt-skin Pt₃Ni framework shell, possessing high electrocatalytic activity, stability and Pt utilisation efficiency. For the oxygen reduction reaction, the anisotropic mesoporous Pt@Pt-skin Pt₃Ni core-shell framework nanowires demonstrated exceptional mass and specific activities of 6.69 A/mg_pt and 8.42 mA/cm² (at 0.9 V versus reversible hydrogen electrode), and the catalyst exhibited high stability with negligible activity decay after 50,000 cycles. The mesoporous Pt@Pt-skin Pt₃Ni core-shell framework nanowire configuration combines the advantages of three-dimensional open mesopore molecular accessibility and compressive Pt-skin surface strains, which results in more catalytically active sites and weakened chemisorption of oxygenated species, thus boosting its catalytic activity and stability towards electrocatalysis.

From flat to deep concave: an unusual mode of facet control

Au particles with rhombic dodecahedron outlines and deep cavities are obtained by epitaxial growth from a triangular nanoplate. An unusual "wrapping" growth that combines ligand-promoted facet-selective growth and site-specific deposition is proposed. Such a templateless growth not only allows the extreme defect-tolerance, but also broadens the synthetic control at the nanoscale.

Conversion of Catalytically Inert 2D Bismuth Oxide Nanosheets for Effective Electrochemical Hydrogen Evolution Reaction Catalysis via Oxygen Vacancy Concentration Modulation

Oxygen vacancies (V_o) in electrocatalysts are closely correlated with the hydrogen evolution reaction (HER) activity. The role of vacancy defects and the effect of their concentration, however, yet remains unclear. Herein, Bi₂O₃, an unfavorable electrocatalyst for the HER due to a less than ideal hydrogen adsorption Gibbs free energy (ΔG_H*), is utilized as a perfect model to explore the function of V_o on HER performance. Through a facile plasma irradiation strategy, Bi₂O₃ nanosheets with different V_o concentrations are fabricated to evaluate the influence of defects on the HER process. Unexpectedly, while the generated oxygen vacancies contribute to the enhanced HER performance, higher V_o concentrations beyond a saturation value result in a significant drop in HER activity. By tunning the V_o concentration in the Bi₂O₃ nanosheets via adjusting the treatment time, the Bi₂O₃ catalyst with an optimized oxygen vacancy concentration and detectable charge carrier concentration of 1.52 × 10²⁴ cm^-3 demonstrates enhanced HER performance with an overpotential of 174.2 mV to reach 10 mA cm^-2, a Tafel slope of 80 mV dec^-1, and an exchange current density of 316 mA cm^-2 in an alkaline solution, which approaches the top-tier activity among Bi-based HER electrocatalysts. Density-functional theory calculations confirm the preferred adsorption of H* onto Bi₂O₃ as a function of oxygen chemical potential (∆μ_O) and oxygen partial potential (P_O2) and reveal that high V_o concentrations result in excessive stability of adsorbed hydrogen and hence the inferior HER activity. This study reveals the oxygen vacancy concentration-HER catalytic activity relationship and provides insights into activating catalytically inert materials into highly efficient electrocatalysts.

Exposing Cu(100) Surface via Ion-Implantation-Induced Oxidization and Etching for Promoting Hydrogen Evolution Reaction

Metallic materials with unique surface structure have attracted much attention due to their unique physical and chemical properties. However, it is hard to prepare bulk metallic materials with special crystal faces, especially at the nanoscale. Herein, we report an efficient method to adjust the surface structure of a Cu plate which combines ion implantation technology with the oxidation-etching process. The large number of vacancies generated by ion implantation induced the electrochemical oxidation of several atomic layers in depth; after chemical etching, the Cu(100) planes were exposed on the surface of the Cu plate. As a catalyst for acid hydrogen evolution reaction, the Cu plate with (100) planes merely needs 273 mV to deliver a current density of 10 mA/cm² because the high-energy (100) surface has moderate hydrogen adsorption and desorption capability. This work provides an appealing strategy to engineer the surface structure of bulk metallic materials and improve their catalytic properties.

Direct Conversion of Solid g-C3N4 into Metal-ended N-doped Carbon Nanotubes for Rechargeable Zn-Air Batteries

Developing low-cost and bifunctional electrocatalysts with activity for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) is great desirable for metal-air battery. Herein, we demonstrate an approach to realize...

Individual concave twin ZnO microdisks with optical resonances

We synthesized concave twin ZnO microdisks, whose outer surfaces are entirely enclosed by high-energy facets. Different from hexagonal planar WGM microdisks, individual concave twin ZnO microdisks show Fabry-Pérot resonances and anisotropic photoluminescence properties at room temperature.

Graphitic Carbon Nitride as a Platform for the Synthesis of Silver Nanoclusters

Graphitic carbon nitride (CN) synthetized by the thermal polycondensation of melamine at 550 °C for 4 h was further exfoliated by heating at 500 °C for 3 h. Silver cations were adsorbed on the exfoliated graphitic carbon nitride (CNE) and then reduced by sodium borohydride forming silver nanoclusters (NCs) with a size of less than 1 nm. The NCs were located on the CNE surface and did not change the CNE properties except for its pore size distribution and thereby specific surface area (SSA). The Ag NCs were able to collect the photoinduced electrons of CNE and thus reduce their recombination with the holes. It was also documented by the increase in the CNE photocatalytic activity in terms of the degradation of antibiotic Ofloxacin. This study demonstrates the ability of CNE to serve as a platform for a simple and fast synthesis of Ag NCs without any stabilizing compounds.

Concave nano-octahedral alloys: wet chemical synthesis of bimetallic Pt-Pd nanocrystals with high-index {hhl} Facets

Concave morphologies provide noble metal nanocrystals (NCs) with unique performances due to large specific surface areas, high curves, hot spots, and elevated energy facets. As a result, concave morphologies have attracted considerable attention in many areas. However, most NCs with concave shapes are currently made of a single metal, leaving plenty of room for easy wet chemical synthesis and structural analysis of unique concave structures, especially bimetallic compounds. In this work, concave octahedral Pt-Pd alloy NCs with high-index {hhl} faces were synthesized using glycine as a coordination molecule and polyvinylpyrrolidone as the surfactant and reducing agent. The high-index facets coupled with the synergistic and electronic effects between Pt and Pd provided concave octahedral Pt-Pd alloy NCs with excellent activity and stability toward the electrooxidation of formic acid when compared to their convex counterparts and commercial Pt black.