3D Anisotropic Au@Pt-Pd Hemispherical Nanostructures as Efficient Electrocatalysts for Methanol, Ethanol, and Formic Acid Oxidation Reaction

Modulating d-Orbital electronic configuration via metal-metal oxide interactions for boosting electrocatalytic methanol oxidation

Coordinating the interfacial interaction between Pt-based nanoparticles (NPs) and supports is a significant strategy for the modulation of d-orbital electronic configuration and the adsorption behaviors of intermediates, which is of critical importance for boosting electrocatalytic performance. Herein, we demonstrated a specific synergy effect between the ordered PtFe intermetallic and neighboring oxygen vacancies (Ov), which provides an "ensemble reaction pool" to balance the barriers of both the activity, stability, and CO poisoning issues for the methanol oxidation reaction (MOR). In our proposed "ensemble reaction pool", the deprotonation of methanol occurs on the Pt site to form the intermediate *CO, where the strain derived from the PtFe intermetallic could alter the d-orbital electronic configuration of Pt, intrinsically weakening the *CO adsorption energy, and Ov in CeO2 promote hydroxyl species (*OH) adsorption, which will react with *CO, facilitating the dissociative adsorption of *CO, thus cooperatively enhancing the performance of MOR. The X-ray absorption fine structure (XAFS) analyses reveal the electron transfer in CeO2 and then convert Ce4+ to Ce3+. The density functional theory (DFT) calculations revealed that introducing Fe induces strain could modify the d-band center of Pt, and thus lower the energy barrier of the potential-determining step. Meanwhile, the introduction of CeO2 can favor the *OH adsorption, speeding up the oxidation and removal of *CO blocked at the Pt site. Furthermore, the determined atomic arrangement and surface composition of PtFe intermetallic further guarantee the stability of MOR by suppressing less-noble metal into the electrolyte.

Construction of H-Doped PdB Nanocrystals as Electrocatalysts to Modulate Formic Acid Oxidation

The strong ligand effect in B-doped Pd-based (PdB) catalysts renders them a promising anode for constructing formic acid fuel cells (FAFCs) exhibiting high power density and outstanding stability. However, the enhancement of the oxidation barrier is unavoidable in this alloy system owing to the electron transfer (ET) from B to Pd. In this study, a hydrogen doping strategy is employed to open charge freedom in PdB compounds and boost their formic acid oxidation reaction (FAOR) activity by suppressing the ET process. The resulting hydrogen-doped PdB (PdBH) exhibits an ultrahigh mass activity of up to 1.2A mg-1 Pd, which is 3.23 times that of the PdB catalyst and 9.55 times that of Pd black. Detailed experimental and theoretical studies show that the interstitial hydrogen leads to enhanced orbital hybridization and reduced electron density around Pd. This optimized ligand effect weakens the carbon monoxide adsorption and increases the direct pathway preference of PdBH, resulting in its outstanding catalytic activity for the FAOR. The development of this high-performance hydrogen-doped PdB catalyst is an important step toward the construction of advanced light element co-doped metal catalysts.

A Biphasic Strategy to Synergistically Accelerate Activation and CO Spillover in Formic Acid Oxidation Catalysis

Developing highly efficient and carbon monoxide (CO)-tolerant platinum (Pt) catalysts for the formic acid oxidation reaction (FAOR) is vital for direct formic acid fuel cells (DFAFCs), yet it is challenging due to the high energy barrier of direct intermediates (HCOO* and COOH*) as well as the CO poisoning issues associated with Pt alloy catalysts. Here we present a versatile biphasic strategy by creating a hexagonal/cubic crystalline-phase-synergistic PtPb/C (h/c-PtPb/C) catalyst to tackle the aforementioned issues. Detailed investigations reveal that h/c-PtPb/C can simultaneously facilitate the adsorption of direct intermediates while inhibiting CO adsorption, thereby significantly improving the activation and CO spillover. As a result, h/c-PtPb/C showcases an outstanding FAOR activity of 8.1 A mgPt-1, which is 64.5 times higher than that of commercial Pt/C and significantly surpasses monophasic PtPb. Moreover, the h/c-PtPb/C-based membrane electrode assembly exhibits an exceptional peak power density of 258.7 mW cm-2 for practical DFAFC applications.

Heterostructured Pt-PbS Nanobelt Achieves Remarkable Direct Formic Acid Oxidation Catalysis

Developing efficient and CO-tolerant platinum (Pt)-based anodic catalysts is challenging for a direct formic acid fuel cell (DFAFC). Herein, we report heterostructured Pt-lead-sulfur (PtPbS)-based nanomaterials with gradual phase regulation as efficient formic acid oxidation reaction (FAOR) catalysts. The optimized Pt-PbS nanobelts (Pt-PbS NBs/C) display the mass and specific activities of 5.90 A mgPt-1 and 21.4 mA cm-2, 2.2/1.2, 1.5/1.1, and 36.9/79.3 times greater than those of PtPb-PbS NBs/C, Pt-PbSO4 NBs/C, and commercial Pt/C, respectively. Simultaneously, it exhibits a higher membrane electrode assembly (MEA) power density (183.5 mW cm-2) than commercial Pt/C (40.3 mW cm-2). This MEA stably operates at 0.4 V for 25 h, demonstrating a competitive potential of device application. The distinctive heterostructure endows the Pt-PbS NBs/C with optimized dehydrogenation steps and resisting the CO poisoning, thus presenting the remarkable FAOR performance. This work paves an effective avenue for creating high-performance anodic catalysts for fuel cells and beyond.

Catalytic Dual-Mode Immunotherapy: Anisotropic AuPt Heterostructure Decorated with Starry Pt Nanoclusters for Robust Cancer Photometalloimmunotherapy

To overcome current limitations in photoimmunotherapy, such as insufficient tumor antigen generation and a subdued immune response, a novel photo-/metallo dual-mode immunotherapeutic agent (PMIA) is introduced for potent near-infrared (NIR) light-triggered cancer therapy. PMIA features a dumbbell-like AuPt heterostructure decorated with starry Pt nanoclusters, meticulously engineered for enhancing plasmonic catalysis through multi-dimensional regulation of Pt growth on Au nanorods. Under NIR laser exposure, end-tipped Pt nanoclusters induce efficient electron-hole spatial separation along the longitudinal axis, resulting in radial and axial electron distribution polarization, conferring unique anisotropic properties to PMIA. Additionally, starry Pt nanoclusters on the sides of Au nanorods augment the local electron enrichment field. Validated through finite-difference time-domain analysis and Raman scattering, this configuration fosters local electron enrichment, facilitating robust reactive oxygen species generation for potent photoimmunotherapy. Moreover, Pt nanoclusters facilitate Pt2+ ion release, instigating intranuclear DNA damage and inducing synergistic immunogenic cell death (ICD) for metalloimmunotherapy. Consequently, PMIA elicits abundant danger-associated molecular patterns, promotes T cell infiltration, and triggers systemic immune responses, effectively treating primary and distant tumors, inhibiting metastasis in vivo. This study unveils a pioneering dual-mode ICD amplification strategy driven by NIR light, synergistically integrating photoimmunotherapy and metalloimmunotherapy, culminating in potent cancer photometalloimmunotherapy.

A Universal Approach for Controllable Synthesis of Homogeneously Alloyed PtM Nanoflowers toward Enhanced Methanol Oxidation

Platinum (Pt)-based alloys have received considerable attention due to their compositional variability and unique electrochemical properties. However, homogeneous element distribution at the nanoscale, which is beneficial to various electrocatalytic reactions, is still a great challenge. Herein, a universal approach is proposed to synthesize homogeneously alloyed and size-tunable Pt-based nanoflowers utilizing high gravity technology. Owing to the significant intensification of micro-mixing and mass transfer in unique high gravity shearing surroundings, five typical binary/ternary Pt-based nanoflowers are instantaneously achieved at room temperature. As a proof-of-concept, as-synthesized Platinum-Silver nanoflowers (PtAg NFs) demonstrate excellent catalytic performance and anti-CO poisoning ability for anodic methanol oxidation reaction with high mass activity of 1830 mA mgPt -1 , 3.5 and 3.2 times higher than those of conventional beaker products and commercial Pt/C, respectively. The experiment in combination with theory calculations suggest that the enhanced performance is due to additional electronic transmission and optimized d-band center of Pt caused by high alloying degree.

Intermetallic Nanocrystals for Fuel-Cells-Based Electrocatalysis

Electrocatalysis underpins the renewable electrochemical conversions for sustainability, which further replies on metallic nanocrystals as vital electrocatalysts. Intermetallic nanocrystals have been known to show distinct properties compared to their disordered counterparts, and been long explored for functional improvements. Tremendous progresses have been made in the past few years, with notable trend of more precise engineering down to an atomic level and the investigation transferring into more practical membrane electrode assembly (MEA), which motivates this timely review. After addressing the basic thermodynamic and kinetic fundamentals, we discuss classic and latest synthetic strategies that enable not only the formation of intermetallic phase but also the rational control of other catalysis-determinant structural parameters, such as size and morphology. We also demonstrate the emerging intermetallic nanomaterials for potentially further advancement in energy electrocatalysis. Then, we discuss the state-of-the-art characterizations and representative intermetallic electrocatalysts with emphasis on oxygen reduction reaction evaluated in a MEA setup. We summarize this review by laying out existing challenges and offering perspective on future research directions toward practicing intermetallic electrocatalysts for energy conversions.

Platinum-palladium-on-reduced graphene oxide as bifunctional electrocatalysts for highly active and stable hydrogen evolution and methanol oxidation reaction

In the context of the gradual depletion of global fossil fuel resources, it is increasingly necessary to explore new alternative energy. Hydrogen energy has attracted great interest from researchers because of its green and pollution-free characteristics. Moreover, the methanol oxidation reaction (MOR) can combine the hydrogen evolution reaction (HER), replacing the anode reaction (oxygen evolution reaction-OER) in overall water splitting and efficiently producing hydrogen. In this study, platinum-palladium nanoparticles on reduced graphene oxide (PtPd/rGO) were successfully synthesized as HER and MOR bifunctional electrocatalysts under alkaline conditions by the stepwise loading of Pt and Pd bimetallic nanoparticles on rGO using a simple liquid-phase reduction method. PtPd/rGO-2 with 0.99 wt% Pt and 2.86 wt% Pd in the HER has the lowest overpotential (87.16 mV at 100 mA cm-2), with the smallest Tafel slope (18.9 mV dec-1). The exceptional mass activity of PtPd/rGO-2 in the MOR reaches 10.75 A mg-1PtPd, which is 18.22 and 53.75 times greater than that of commercial Pt/C (Pt/C) and commercial Pd/C (Pd/C), respectively. PtPd/rGO-2 is 0.935 V lower in the coupling reaction of HER and MOR (MOR ∥ HER) compared to the overall water splitting (OER ∥ HER) without methanol (10 mA cm-2). This is probably because appropriate Pt and Pd loading exposes many more catalytic sites, and the synergistic interaction between Pt, Pd, and Pt-Pd enhances the catalytic performance. This strategy can be used for the synthesis of novel bifunctional electrocatalysts.

Facile Synthesis of Multifunctional Ni(OH)2 -Supported Core-Shell Ni@Pd Nanocomposites for the Electro-Oxidation of Small Organic Molecules

In the domain of proton exchange membrane fuel cells (PEMFCs), the development of efficient and durable catalysts for the electro-oxidation of small organic molecules, especially of alcohols (methanol, ethanol, ethylene glycol, et al.) has always been a hot topic. A large number of related electrocatalysts with splendid performance have been designed and synthesized till now, while the preparation processes of most of them are demanding on experimental operations and conditions. Herein, we put forward a facile and handy method for the preparation of multifunctional Ni(OH)2 -supported core-shell Ni@Pd nanocomposites (Ni(OH)2 /Ni@Pd NCs) with the assistance of galvanic replacement reaction (GRR) at room temperature and ambient pressure. As expected, the Ni(OH)2 substrate can prevent the aggregation of core-shell (CS) Ni@Pd nanoparticles (NPs) and inhibit the formation of COads and further prevent Pd from being poisoned. The synergistic effect between CS Ni@Pd NPs and Ni(OH)2 substrate and the electronic effect between Pd shell and Ni core contribute to the outstanding electrocatalytic performance for methanol, ethanol, and ethylene glycol oxidation in alkaline condition. This study provides a succinct method for the design and preparation of efficient Pd-based electrocatalysts for alcohol electro-oxidation.

Defect Rich Structure Activated 3D Palladium Catalyst for Methanol Oxidation Reaction

Controlling the structure and properties of catalysts through atomic arrangement is the source of producing a new generation of advanced catalysts. A highly active and stable catalyst in catalytic reactions strongly depends on an ideal arrangement structure of metal atoms. We demonstrated that the introduction of the defect-rich structures, low coordination number (CN), and tensile strain in three-dimensional (3D) urchin-like palladium nanoparticles through chlorine bonded with sp-C in graphdiyne (Pd-UNs/Cl-GDY) can regulate the arrangement of metal atoms in the palladium nanoparticles to form a special structure. In situ Fourier infrared spectroscopy (FTIR) and theoretical calculation results show that Pd-UNs/Cl-GDY catalyst is beneficial to the oxidation and removal of CO intermediates. The Pd-UNs/Cl-GDY for methanol oxidation reaction (MOR) that display high current density (363.6 mA cm-2 ) and mass activity (3.6 A mgPd -1 ), 12.0 and 10.9 times higher than Pd nanoparticles, respectively. The Pd-UNs/Cl-GDY catalyst also exhibited robust stability with still retained 95 % activity after 2000 cycles. A defects libraries of the face-centered cubic and hexagonal close-packed crystal catalysts (FH-NPs) were synthesized by introducing chlorine in graphdiyne. Such defect-rich structures, low CN, and tensile strain tailoring methods have opened up a new way for the catalytic reaction of MOR.

Electrodeposition-Assisted Crystal Growth Regulation of PdBi Clusters on Carbon Cloths for Ethanol Oxidation

Carbon-supported Pd-based clusters are one of the most promising anodic catalysts for ethanol oxidation reaction (EOR) due to their encouraging activity and practical applications. However, unclear growth mechanism of Pd-based clusters on the carbon-based materials has hindered their extensive applications. Herein, we first introduce multi-void spherical PdBi cluster/carbon cloth (PdBi/CC) composites by an electrodeposition routine. The growth mechanism of PdBi clusters on the CC supports has been systemically investigated by evaluating the selected samples and tuning their compositions, which involve the big difference in standard redox potential between Pd2+/Pd and Bi3+/Bi and easy adsorption of Bi3+ on the surface of Pd-rich seeds. Benefitting from the ensembles of many nanocrystal subunits, multi-void spherical PdBi clusters can present collective properties and novel functionalities. In addition, the outstanding characteristics of CC supports enable PdBi clusters with stable nanostructures. Thanks to the unique structure, Pd20Bi/CC catalysts manifest higher EOR activity and better stability compared to Pd/CC. Systematic characterizations and a series of CO poisoning tests further confirm that the dramatically enhanced EOR activity and stability can be attributed to the incorporation of Bi species and the strong coupling of the structure between PdBi clusters and CC supports.

Abundant Exterior/Interior Active Sites Enable Three-Dimensional PdPtBiTe Dumbbells C-C Cleavage Electrocatalysts for Actual Alcohol Fuel Cells

Developing high-activity electrocatalysts is of great significance for the commercialization of direct alcohol fuel cells (DAFCs), but it still faces challenges. Herein, three-dimensional (3D) porous PdPtBiTe dumbbells (DBs) were successfully fabricated via the visible photoassisted method. The alloying effect, defect-rich surface/interface and nanoscale cavity, and open pores make the 3D PdPtBiTe DBs a comprehensive and remarkable electrocatalyst for the C1-C3 alcohol (ethanol, ethylene glycol, glycerol, and methanol) oxidation reaction (EOR, EGOR, GOR, and MOR, respectively) in an alkaline electrolyte, and the results of in situ Fourier transform infrared spectra revealed a superior C-C bond cleavage ability. The 3D PdPtBiTe DBs exhibit ultrahigh EOR, EGOR, GOR, and MOR mass activities of 25.4, 23.2, 16.8, and 18.3 A mgPd + Pt-1, respectively, considerably surpassing those of the commercial Pt/C and Pd/C. Moreover, the mass peak power densities of 3D PdPtBiTe DBs in actual ethanol, ethylene glycol, glycerol, or methanol fuel cells increase to 409.5, 501.5, 558.0, or 601.3 mW mgPd + Pt-1 in O2, respectively. This study provides a new class of multimetallic nanomaterials as state-of-the-art multifunctional anode electrocatalysts for actual DAFCs.

Highly Selective Synthesis of Monoclinic-Phased Platinum-Tellurium Nanotrepang for Direct Formic Acid Oxidation Catalysis

Designing efficient formic acid oxidation reaction (FAOR) catalysts with remarkable membrane electrode assembly (MEA) performance in a direct formic acid fuel cell (DFAFC) medium is significant yet challenging. Herein, we report that the monoclinic-phased platinum-tellurium nanotrepang (m-PtTe NT) can be adopted as a highly active, selective, and stable FAOR catalyst with a desirable direct reaction pathway. The m-PtTe NT exhibits the high specific and mass activities of 6.78 mA cm^-2 and 3.2 A mg_Pt^-1, respectively, which are 35.7/22.9, 2.8/2.6, and 3.9/2.9 times higher than those of commercial Pt/C, rhombohedral-phased Pt₂Te₃ NT (r-Pt₂Te₃ NT), and trigonal-phased PtTe₂ NT (t-PtTe₂ NT), respectively. Simultaneously, the highest reaction tendency for the direct FAOR pathway and the best tolerance to poisonous CO intermediate can also be realized by m-PtTe NT. More importantly, even in a single-cell medium, the m-PtTe NT can display a much higher MEA power density (171.4 mW cm^-2) and stability (53.2% voltage loss after 5660 s) than those of commercial Pt/C, demonstrating the great potential in operating DFAFC device. The in-situ Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy jointly demonstrate that the unique nanostructure of m-PtTe NT can effectively optimize dehydrogenation steps and inhibit the CO intermediate adsorption, as well as promote the oxidation of noxious CO intermediate, thus achieving the great improvement of FAOR activity, poisoning tolerance, and stability. Density functional theory calculations further reveal that the direct pathway is the most favorable on m-PtTe NT than r-Pt₂Te₃ NT and t-PtTe₂ NT. The higher activation energy to produce CO and the relatively weaker binding with CO of m-PtTe NT result in the better CO tolerance. This work achieves remarkable FAOR and MEA performances of advanced Pt-based anodic catalysts for DFAFCs via a phase engineering strategy.

Palladium metallene confined on MXene with increased hydroxyl binding strength for highly efficient ethanol electrooxidation

Rational design and synthesis of high-performance electrocatalysts for ethanol oxidation reaction (EOR) is crucial to large-scale commercialization of direct ethanol fuel cells, but it is still an incredible challenge. Herein, a unique Pd metallene/Ti3C2Tx MXene (Pdene/Ti3C2Tx)-supported electrocatalyst is constructed via an in-situ growth approach for high-efficiency EOR. The resulting Pdene/Ti3C2Tx catalyst achieves an ultrahigh mass activity of 7.47 A mgPd-1 under alkaline condition, as well as high tolerance to CO poisoning. In situ attenuated total reflection-infrared spectroscopy studies combined with density functional theory calculations reveal that the excellent EOR activity of Pdene/Ti3C2Tx catalyst is attributed to the unique and stable interfaces which reduce the reaction energy barrier of *CH3CO intermediate oxidation and facilitate oxidative removal of CO poisonous species by increasing the Pd-OH binding strength.

Bimetallic Pt-Hg Aerogels for Electrocatalytic Upgrading of Ethanol to Acetate

Electrochemical upgrading of ethanol to acetic acid provides a promising strategy to couple with the current hydrogen production from water electrolysis. This work reports the design of a series of bimetallic PtHg aerogels, where the PtHg aerogel exhibits a 10.5-times higher mass activity than that of commercial Pt/C toward ethanol oxidation. More impressively, the PtHg aerogel demonstrates nearly 100% selectivity toward the production of acetic acid. The operando infrared spectroscopic studies and nuclear magnetic resonance analysis verify the preferable C2 pathway mechanism during the reaction. This work opens an avenue for the electrochemical synthesis of acetic acid via ethanol electrolysis.

Prussian-blue-analogue derived FeNi2S4/NiS nanoframes supported by N-doped graphene for highly efficient methanol oxidation electrocatalysis

The design of effective and robust non-noble metal electrocatalysts to enhance catalytic reaction kinetic is critical to promote methanol oxidation catalysis. Herein, hierarchical Prussian blue analogue (PBA)-derived sulfide heterostructures supported by N-doped graphene (FeNi₂S₄/NiS-NG) as efficient catalysts have been developed for methanol oxidation reaction (MOR). Benefiting from the merits of hollow nanoframes structure and heterogeneous sulfide synergy, FeNi₂S₄/NiS-NG composite not only possesses abundant active sites to boost the catalytic properties but also alleviates the CO poisoning effect during the process exhibiting favorable kinetic behavior toward MOR. Specifically, the remarkable catalytic activity (97.6 mA cm^-2/1544.3 mA mg^-1) of FeNi₂S₄/NiS-NG for methanol oxidation was achieved, superior to most reported non-noble electrocatalysts. Additionally, the catalyst showed competitive electrocatalytic stability, with a current density of over 90% after 2000 consecutive CV cycles. This study offers promising insights into the rational modulation of the morphology and components of precious-metal-free catalysts for fuel cell applications.

Te-induced fabrication of Pt3PdTe0.2 alloy nanocages by the self-diffusion of Pd atoms with unique MOR electrocatalytic performance

The key to the application of direct methanol fuel cells is to improve the activity and durability of Pt-based catalysts. Based on the upshift of the d-band centre and exposure to more Pt active sites, Pt3PdTe0.2 catalysts with significantly enhanced electrocatalytic performance for the methanol oxidation reaction (MOR) were designed in this study. A series of different Pt3PdTex (x = 0.2, 0.35, and 0.4) alloy nanocages with hollow and hierarchical structures were synthesized using cubic Pd nanoparticles as sacrificial templates and PtCl62- and TeO32- metal precursors as oxidative etching agents. The Pd nanocubes were oxidized into an ionic complex, which was further co-reduced with Pt and Te precursors by reducing agents to form the hollow Pt3PdTex alloy nanocages with a face-centred cubic lattice. The sizes of the nanocages were around 30-40 nm, which were larger than the Pd templates (18 nm) and the thicknesses of the walls were 7-9 nm. The Pt3PdTe0.2 alloy nanocages exhibited the highest catalytic activities and stabilities toward the MOR after electrochemical activation in sulfuric acid solution. CO-stripping tests suggested the enhanced CO-tolerant ability due to the doping of Te. The specific activity of Pt3PdTe0.2 for the MOR reached 2.71 mA cm-2 in acidic conditions, which was higher than those of Pd@Pt core-shell and PtPd1.5 alloy nanoparticles and commercial Pt/C. A DMFC with Pt3PdTe0.2 as the anodic catalyst output a higher power density by 2.6 times than that of commercial Pt/C, demonstrating its practicable application in clean energy conversions. Density functional theory (DFT) confirmed that the alloyed Te atoms altered the electron distributions of Pt3PdTe0.2, which could lower the Gibbs free energy of the rate-determining methanol dehydrogenation step and greatly improve the MOR catalytic activity and durability.

Engineering composition-varied Au/PtTe hetero-junction-abundant nanotrough arrays as robust electrocatalysts for ethanol electrooxidation

Pt-based multi-metallic electrocatalysts containing hetero-junctions are found to have superior catalytic performance to composition-equivalent counterparts. However, in bulk solution, controllable preparation of Pt-based hetero-junction electrocatalyst is an extremely random work owing to the complexity of solution reactions. Herein, we develop an interface-confined transformation strategy, subtly achieving Au/PtTe hetero-junction-abundant nanostructures by employing interfacial Te nanowires as sacrificing templates. By controlling the reaction conditions, composition-varied Au/PtTe can be easily obtained, such as Au₇₅/Pt₂₀Te₅, Au₅₅/Pt₃₄Te₁₁, and Au₅/Pt₆₉Te₂₆. Moreover, each Au/PtTe hetero-junction nanostructure appears to be an array consisting of side-by-side Au/PtTe nanotrough units and can be directly used as a catalyst layer without further post-treatment. All Au/PtTe hetero-junction nanostructures show better catalytic activity towards ethanol electrooxidation than commercial Pt/C because of the combining contributions of Au/Pt hetero-junctions and the collective effects of multi-metallic elements, where Au₇₅/Pt₂₀Te₅ exhibits the best electrocatalytic performance among three Au/PtTe nanostructures owing to its optimal composition. This study may provide technically feasible guidance for further maximizing the catalytic activity of Pt-based hybrid catalysts.

Subnanoscale Dual-Site Pd-Pt Layers Make PdPtCu Nanocrystals CO-Tolerant Bipolar Effective Electrocatalysts for Alcohol Fuel Cell Devices

Finding a high-performance low-Pt bipolar electrocatalyst in actual direct alcohol fuel cells (DAFCs) remains challenging and desirable. Here, we developed a crystalline PdPtCu@amorphous subnanometer Pd-Pt "dual site" layer core-shell structure for the oxygen reduction reaction (ORR) and alcohol (methanol, ethylene glycol, glycerol, and their mixtures) oxidation reaction (AOR) in an alkaline electrolyte (denoted D-PdPtCu). The prepared D-PdPtCu/C achieved a direct 4-electron ORR pathway, a full oxidation pathway for AOR, and high CO tolerance. The ORR mass activity (MA) of D-PdPtCu/C delivered a 52.8- or 59.3-fold increase over commercial Pt/C or Pd/C, respectively, and no activity loss after 20000 cycles. The D-PdPtCu/C also exhibited much higher AOR MA and stability than Pt/C or Pd/C. Density functional theory revealed the intrinsic nature of a subnanometer Pd-Pt "dual site" surface for ORR and AOR activity enhancement. The D-PdPtCu/C as an effective bipolar electrocatalyst yielded higher peak power densities than commercial Pt/C in actual DAFCs.

Photoelectrocatalytic oxidation of ethylene glycol on trimetallic PdAgCu nanospheres enhanced by surface plasmon resonance

The notable surface plasmon resonance (SPR) effect of some metals has been applied to improve the efficiency of alcohol oxidation reactions, whereas the comprehensive investigation of Cu-assisted photoelectrocatalysis remains challenging. We herein successfully prepared trimetallic PdAgCu nanospheres (NSs) with abundant surface bulges for the advanced ethylene glycol oxidation reaction (EGOR) and compared them with bimetallic PdAg NSs to investigate the performance enhancement mechanism. Impressively, the as-optimized PdAgCu NSs exhibited superb mass activity and electrochemical stability. Moreover, under visible light illumination, the mass activity of PdAgCu NSs increased to 1.62 times compared to that in the dark, and in contrast, the mass activity of PdAg NSs only increased to 1.48 times that in the dark. A mechanistic study indicated that the incorporation of Cu not only strengthens the whole SPR effect of PdAgCu NSs but also further modifies the electronic structure of Pd. This work highlighted that the incorporation of Cu into PdAg NSs further enhanced the photoelectrocatalytic performance and increased noble metal atom utilization, which may provide guidance to fabricate novel and promising nanocatalysts in the field of photoelectrocatalysis.

Continuous-Flow Hydrogenation of Nitroaromatics in Microreactor with Mesoporous Pd@SBA-15

The hydrogenation of nitroaromatics to prepare aromatic amines plays a crucial role in the chemical industry. Traditional hydrogenation has the risk of hydrogen leakage from the equipment, and its catalyst has the disadvantage of being easily deactivated and difficult to recover. In this study, we designed an efficient and stable mesoporous catalyst, Pd@SBA-15, which was constructed by impregnating the nanopores of the mesoporous material SBA-15 with palladium nanoparticles. The catalyst was then filled in a micro-packed-bed reactor (MPBR) for continuous flow hydrogenation. The designed continuous flow hydrogenation system has two distinctive features. First, we used mesoporous Pd@SBA-15 instead of the traditional bulk Pd/C as the hydrogenation catalyst, which is more suitable for exposing the active sites of metal Pd and reducing the agglomeration of nanometals. The highly ordered porous structure enhances hydrogen adsorption and thus hydrogenation efficiency. Secondly, the continuous flow system allows for precise detection and control of the reaction process. The highly efficient catalysts do not require complex post-treatment recovery, which continues to operate for 24 h with barely any reduction in activity. Due to the high catalytic activity, the designed mesoporous Pd@SBA-15 showed excellent catalytic performance as a hydrogenation catalyst in a continuous flow system with 99% conversion of nitroaromatics in 1 min. This work provides insights into the rational design of hydrogenation systems in the chemical industry.

Boosting the Electrocatalytic Formic Acid Oxidation Activity via P-PdAuAg Quaternary Alloying

Direct formic acid fuel cells (DFAFCs) are considered promising sustainable power sources due to their high energy density, nonflammability, and low fuel crossover. However, serious CO poisoning and activity attenuation of the anodic formic acid oxidation reaction (FAOR) greatly restrict the output and durability of DFAFCs. Inspired by the specific relationship between the composition, type, and property of alloys, in this work, we synthesize a series of hybrid substitutional/interstitial quaternary alloys P-PdAuAg by means of a novel polyphosphide route to address these issues. Due to the simultaneous interstitial P-doping and metal (Au, Ag, Pd) co-reduction, the P-PdAuAg quaternary alloy obtained is only 3 nm in diameter with abundant defects. It not only achieves a new high mass activity of 8.08 A mg_Pd^-1 (6.78 A mg_catalyst^-1) but also maintains high stability in the high potential range and harsh reaction conditions. Both the activity and anti-poisoning ability are far exceeding those of the currently reported FAOR catalysts. Detailed density functional theory (DFT) calculations reveal that the superb electrochemical performances originate from the shift of the d-band center of Pd as a result of the synergistic electronic/ligand effects between Pd, Au, Ag, and P. The introduction of interstitial P inhibits the occurrence of an indirect reaction pathway on Pd, while Au and Ag suppress the adsorption of CO and optimize the sequential dehydrogenation steps, leading to boosted reaction kinetics and CO tolerance. This work pioneered a facile way for the synthesis of Pd-based substitutional/interstitial hybrid alloys, providing a promising means of further improving the performance of alloying catalysts.

Tubular palladium-based catalysts enhancing direct ethanol electrooxidation

Direct ethanol fuel cell (DEFC) has the advantages of high power density, high energy conversion efficiency and environmental friendliness, but its commercialization is restricted by factors such as insufficient activity and low anti-poisoning ability of anode catalyst for incomplete oxidation of ethanol. It is of great significance to design and prepare anode catalyst with high activity and high anti-poisoning ability that can be recycled. In this work, tubular palladium-based (Pd-based) catalysts with abundant lattice defect sites were prepared by simple and reproducible electro-displacement reactions using Cu nanowires as sacrificial template. Pd is the main catalytic element which provides adsorption sites for ethanol oxidation. Ag and Cu introduced facilitates the formation of hydroxyl groups to oxidize toxicity intermediates, and changes the d-band center position of Pd, so as to adjust the adsorption and desorption of ethanol and its intermediates on the Pd surface. At the same time, Au introduced with high potential maintains the stability of the catalyst structure. The tubular structure exposes more active sites, improves the atomic utilization rate and enhances the ability of the catalyst resisting dissolution and aggregation. The series of PdAuAgCu tubular catalysts with outer layer dendrites were prepared by electro-displacement reactions using the mixture (ethylene glycol : ultra-pure water = 3 : 1) as the reaction solvent and fivefold twinned Cu nanowires as sacrificial template. The performance evaluation of ethanol electrocatalytic oxidation showed that the Pd₁₇Au₄₀Ag₁₁Cu₃₂ tubular catalysts were prepared at 120 °C and 10 mM CTAB had excellent overall performance, with a peak mass activity of 6335 mA mg_Pd^-1, which was 9.6 times of Pd/C (JM). The residual current density after the stability test of 3000 s was 249 mA mg_Pd^-1, which was 3.3 times of Pd/C (JM).

Ultrafine Core@Shell Cu1Au1@Cu1Pd3 Nanodots Synergized with 3D Porous N-Doped Graphene Nanosheets as a High-Performance Multifunctional Electrocatalyst

Rationally combining designed supports and metal-based nanomaterials is effective to synergize their respective physicochemical and electrochemical properties for developing highly active and stable/durable electrocatalysts. Accordingly, in this work, sub-5 nm and monodispersed nanodots (NDs) with the special nanostructure of an ultrafine Cu₁Au₁ core and a 2-3-atomic-layer Cu₁Pd₃ shell are synthesized by a facile solvothermal method, which are further evenly and firmly anchored onto 3D porous N-doped graphene nanosheets (NGS) via a simple annealing (A) process. The as-obtained Cu₁Au₁@Cu₁Pd₃ NDs/NGS-A exhibits exceptional electrocatalytic activity and noble-metal utilization toward the alkaline oxygen reduction, methanol oxidation, and ethanol oxidation reactions, showing dozens-fold enhancements compared with commercial Pd/C and Pt/C. Besides, it also has excellent long-term electrochemical stability and electrocatalytic durability. Advanced and comprehensive experimental and theoretical analyses unveil the synthetic mechanism of the special core@shell nanostructure and further reveal the origins of the significantly enhanced electrocatalytic performance: (1) the prominent structural properties of NGS, (2) the ultrasmall and monodispersed size as well as the highly uniform morphology of the NDs-A, (3) the special Cu-Au-Pd alloy nanostructure with an ultrafine core and a subnanometer shell, and (4) the strong metal-support interaction. This work not only develops a facile method for fabricating the special metal-based ultrafine-core@ultrathin-shell nanostructure but also proposes an effective and practical design paradigm of comprehensively and rationally considering both supports and metal-based nanomaterials for realizing high-performance multifunctional electrocatalysts, which can be further expanded to other supports and metal-based nanomaterials for other energy-conversion or environmental (electro)catalytic applications.

Design strategies of Pt-based electrocatalysts and tolerance strategies in fuel cells: a review

As highly efficient conversion devices, proton-exchange-membrane fuel cells (PEMFCs) can directly convert chemical energy to electrical energy with high efficiencies and lower or even zero emissions compared to combustion engines. However, the practical applications of PEMFCs have been seriously hindered by the intermediates (especially CO) poisoning of anodic Pt catalysts. Hence, how to improve the CO tolerance of the needed Pt catalysts and reveal their anti-CO poisoning mechanism are the key points to developing novel anti-toxic Pt-based electrocatalysts. To date, two main strategies have received increasing attention in improving the CO tolerance of Pt-based electrocatalysts, including alloying Pt with a second element and fabricating composites with geometry and interface engineering. Herein, we will first discuss the latest developments of Pt-based alloys and their anti-CO poisoning mechanism. Subsequently, a detailed description of Pt-based composites with enhanced CO tolerance by utilizing the synergistic effect between Pt and carriers is introduced. Finally, a brief perspective and new insights on the design of Pt-based electrocatalysts to inhibit CO poisoning in PEMFCs are also presented.

Medium/High-Entropy Amalgamated Core/Shell Nanoplate Achieves Efficient Formic Acid Catalysis for Direct Formic Acid Fuel Cell

High-entropy alloys (HEAs) have been attracting extensive research interests in designing advanced nanomaterials, while their precise control is still in the infancy stage. Herein, we have reported a well-defined PtBiPbNiCo hexagonal nanoplates (HEA HPs) as high-performance electrocatalysts. Structure analysis decodes that the HEA HP is constructed with PtBiPb medium-entropy core and PtBiNiCo high-entropy shell. Significantly, the HEA HPs can reach the specific and mass activities of 27.2 mA cm^-2 and 7.1 A mg_Pt ^-1 for formic acid oxidation reaction (FAOR), being the record catalyst ever achieved in Pt-based catalysts, and can realize the membrane electrode assembly (MEA) power density (321.2 mW cm^-2 ) in fuel cell. Further experimental and theoretical analyses collectively evidence that the hexagonal intermetallic core/atomic layer shell structure and multi-element synergy greatly promote the direct dehydrogenation pathway of formic acid molecule and suppress the formation of CO*.

One-Pot Au@Pd Dendritic Nanoparticles as Electrocatalysts with Ethanol Oxidation Reaction

The one-pot synthesis strategy of Au@Pd dendrites nanoparticles (Au@Pd DNPs) was simply synthesized in a high-temperature aqueous solution condition where cetyltrimethylammonium chloride (CTAC) acted as a reducing and capping agent at a high temperature. The Au@Pd DNPs with highly monodisperse were shown in high yields by the Au:Pd rate. The nanostructure and optical and crystalline properties of the Au@Pd DNPs were characterized by UV–vis spectroscopy, transmission electron microscopy (TEM), and X-ray diffraction. The Au@Pd DNPs showed an efficient electrochemical catalytic performance rate toward the ethanol oxidation reaction (EOR) due to their nanostructures and Au:Pd rate.

PtCuRu Nanoflowers with Ru-Rich Edge for Efficient Fuel-Cell Electrocatalysis

Enhancing the catalytic activity of Pt-based alloy by a rational structural design is the key to addressing the sluggish kinetics of direct alcohol fuel cells. Herein, a facile one-pot method is reported to synthesize PtCuRu nanoflowers (NFs). The synergetic effect among Pt, Cu, and Ru can lower the d-band center of Pt, regulate the morphology, generate Ru-rich edge, and allow the exposure of more high index facets. The optimized Pt_0.68 Cu_0.18 Ru_0.14 NFs exhibit outstanding electrocatalytic performances and excellent anti-poisoning abilities. The specific activities for the methanol oxidation reaction (MOR) (7.65 mA cm^-2 ) and ethanol oxidation reaction (EOR) (7.90 mA cm^-2 ) are 6.0 and 7.1 times higher than commercial Pt/C, respectively. The CO stripping experiment and the chronoamperometric (5000 s) demonstrate the superior anti-poisoning property and durability performance. Density functional theory calculations confirm that high metallization degree leads to the decrease of d-band center, the promotion of oxidation of CO, and improvement of the inherent activity and anti-poisoning ability. A Ru-rich edge exposes abundant high index facets to accelerate the reaction kinetics of rate-determining steps by decreasing the energy barrier for forming *HCOOH (MOR) and CC bond breaking (EOR).

Recent Advances in Anode Electrocatalysts for Direct Formic Acid Fuel Cell-II-Platinum-Based Catalysts

Platinum-based catalysts have a long history of application in formic acid oxidation (FAO). The single metal Pt is active in FAO but expensive, scarce, and rapidly deactivates. Understanding the mechanism of FAO over Pt important for the rational design of catalysts. Pt nanomaterials rapidly deactivate because of the CO poisoning of Pt active sites via the dehydration pathway. Alloying with another transition metal improves the performance of Pt-based catalysts through bifunctional, ensemble, and steric effects. Supporting Pt catalysts on a high-surface-area support material is another technique to improve their overall catalytic activity. This review summarizes recent findings on the mechanism of FAO over Pt and Pt-based alloy catalysts. It also summarizes and analyzes binary and ternary Pt-based catalysts to understand their catalytic activity and structure relationship.

Atom Absorption Energy Directed Symmetry-Breaking Synthesis of Au-Ag Hierarchical Nanostructures and Their Efficient Photothermal Conversion

Asymmetric plasmonic hierarchical nanostructures (HNs) are of great significance in optics, catalysis, and sensors, but the complex growth kinetics and lack of fine structure design limit their practical applications. Herein, a new atom absorption energy strategy is developed to achieve a series of Au-Ag HNs with the continuously tuned contact area in Janus and Ag island number/size on Au seeds. Different from the traditional passive growth mode, this strategy endows seed with a hand to capture the hetero atoms in a proactive manner, which is beyond the size, shape, and assembles of Au seed. Density functional theory reveals ththe adsorption of PDDA on Au surface leads to lower formation energy of Au-Ag bonds (-3.96 eV) than FSDNA modified Au surface (-2.44 eV). The competitive adsorption of two ligands on Au seed is the decisive factor for the formation of diverse Au-Ag HNs. In particular, the Au-Ag₂ HNs exhibit outstanding photothermal conversion capability in the near-infrared window, and in vivo experiments verify them as superior photothermal therapy agents. This work highlights the importance of the atom absorption energy strategy in unlocking the diversity of HNs and may push the synthesis and application of superstructures to a higher level.

Ultrathin rhodium nanosheet-gold nanowire nanocomposites for alkaline methanol oxidation reaction

Electrostatically assembled ultrathin rhodium nanosheet-gold nanowire nanocomposites (Rh-Au CNSs) were used as an advanced electrocatalyst for the methanol oxidation reaction, which revealed a mass activity of 355 mA mg_Rh^-1 at 0.607 V potential, much higher than single metal Rh nanosheets (273 mA mg_Rh^-1) and commercial Rh nanoparticles (165 mA mg_Rh^-1).

One Stone Two Birds: Unlocking the Synergy between Amorphous Ni(OH)2 and Pd Nanocrystals toward Ethanol and Formic Acid Oxidation

Even though extensive efforts have been devoted to mixing Pd nanocrystals with Ni(OH)₂ for the enhanced synergy, it remains a great challenge to incorporate nanosized Ni(OH)₂ species on the Pd electrode and reveal their synergy. Herein, we present spongelike Pd nanocrystals with the modification of amorphous Ni(OH)₂ species. The catalyst configuration is first considered by compositing Pd with Ni(OH)₂ species to optimize the Pd-Pd interatomic distance and then constructing a strongly coupled interface between Pd nanostructures and Ni(OH)₂ species. For the ethanol oxidation reaction (EOR) and the formic acid oxidation reaction (FAOR), Pd-Ni(OH)₂ composites exhibit an impressive mass activity of 4.98 and 2.65 A mg_Pd^-1, respectively. Most impressively, there is no significant decrease in the EOR activity during five consecutive cycles (50 000 s). A series of CO-poisoning tests have proved that the enhanced EOR and FAOR performances involve synergy between Pd nanostructures and Ni(OH)₂ species.

Short-Range Diffusion Enables General Synthesis of Medium-Entropy Alloy Aerogels

Medium-entropy alloy aerogels (MEAAs) with the advantages of both multimetallic alloys and aerogels are promising new materials in catalytic applications. However, limited by the immiscible behavior of different metals, achieving single-phase MEAAs is still a grand challenge. Herein, a general strategy for preparing ultralight 3D porous MEAAs with the lowest density of 39.3 mg cm^-3 among the metal materials is reported, through combining auto-combustion and subsequent low-temperature reduction procedures. The homogenous mixing of precursors at the ionic level makes the short-range diffusion of metal atoms possible to drive the formation of single-phase MEAAs. As a proof of concept in catalysis, as-synthesized Ni₅₀ Co₁₅ Fe₃₀ Cu₅ MEAAs exhibit a high mass activity of 1.62 A mg^-1 and specific activity of 132.24 mA cm^-2 toward methanol oxidation reactions, much higher than those of the low-entropy counterparts. In situ Fourier transform infrared and NMR spectroscopies reveal that MEAAs can enable highly selective conversion of methanol to formate. Most importantly, a methanol-oxidation-assisted MEAAs-based water electrolyzer can achieve a low cell voltage of 1.476 V at 10 mA cm^-2 for making value-added formate at the anode and H₂ at the cathode, 173 mV lower than that of traditional alkaline water electrolyzers.

Platinum-Ruthenium Single Atom Alloy as a Bifunctional Electrocatalyst toward Methanol and Hydrogen Oxidation Reactions

The precise regulation for the structural properties of nanomaterials at the atomic scale is an effective strategy to develop high-performance catalysts. Herein, a facile dual-regulation approach was developed to successfully synthesize Ru₁Pt_n single atom alloy (SAA) with atomic Ru dispersed in Pt nanocrystals. High-angle annular dark-field scanning transmission electron microscopy and X-ray absorption fine structure demonstrated that Ru atoms were dispersed in Pt nanocrystals as single atoms. Impressively, the Ru₁Pt_n-SAA exhibited an ultrahigh specific activity (23.59 mA cm^-2) and mass activity (2.805 mA/μg_-PtRu) for methanol oxidation reaction (MOR) and exhibited excellent exchange current density activity (1.992 mA cm^-2) and mass activity (4.71 mA/μg_-PtRu) for hydrogen oxidation reaction (HOR). Density functional theory calculations revealed that the introduction of Ru atoms greatly reduced the reaction free energy for the decomposition of water molecules, which promoted the removal of CO* in the MOR process and adjusted the Gibbs free energy of hydrogen and hydroxyl adsorption to promote the HOR. Our work provided an effective idea for the development of high performance electrocatalysts.

Extraordinary p-d Hybridization Interaction in Heterostructural Pd-PdSe Nanosheets Boosts C-C Bond Cleavage of Ethylene Glycol Electrooxidation

Advanced electrocatalysts for complete oxidation of ethylene glycol (EG) in direct EG fuel cells are strongly desired owing to the higher energy efficiency. Herein, Pd-PdSe heterostructural nanosheets (Pd-PdSe HNSs) have been successfully fabricated via a one-step approach. These Pd-PdSe HNSs feature unique electronic and geometrical structures, in which unconventional p-d hybridization interactions and tensile strain effect co-exist. Compared with commercial Pd/C and Pd NSs catalysts, Pd-PdSe HNSs display 5.5 (6.6) and 2.5 (2.6) fold enhancement of specific (mass) activity for the EG oxidation reaction (EGOR). Especially, the optimum C1 pathway selectivity of Pd-PdSe HNSs reaches 44.3 %, illustrating the superior C-C bond cleavage ability. Electrochemical in situ FTIR spectroscopy and theoretical calculations demonstrate that the extraordinary p-d hybridization interaction and tensile strain effect could effectively reduce the activation energy of C-C bond breaking and accelerate CO* oxidation, boosting the complete oxidation of EG and improving the catalytic performance.

Modification of Palladium Nanocrystals with Single Atom Platinum via an Electrochemical Self-Catalysis Strategy for Efficient Formic Acid Electrooxidation

Single atom alloys (SAA) have recently drawn increased attention due to their unique structure, high atomic utilization, and fascinating catalytic performance. However, their controllable synthesis still presents a challenge. This study proposes an electrochemical self-catalysis (ESC) strategy to synthesize Pd@Pt/C SAA catalysts, that is, depositing Pt atoms on Pd nanocrystals through in situ decomposition of sodium formate. The relationship between composition and structure of Pd@Pt/C is distinguished through a combination of electrochemical analysis, sphere-corrected scanning transmission electron microscopy, and X-ray adsorption spectra. That relationship evolved from SAA to a sea-island structure and even a core-shell structure with composition-controllable atomic ratios, highlighting the great diversity and convenience of this method in nanostructure construction. The Pd@Pt/C SAA catalyst showed excellent catalytic activity to formic acid oxidation with a peak current density of 5.2 A/mg^metal, which is about 18.6 times that of the commercial Pd/C. density functional theory calculations revealed that the enhanced activity was due to the "passivation" of Pd sites near the Pt single atoms, which attenuated the adsorption of CO. Based on electrochemical principles, this ESC strategy was also expanded to prepare a series of Pd-based SAA, including Pd-Au, Pd-Ir, and Pd-Bi.

Porous PdWM (M = Nb, Mo and Ta) Trimetallene for High C1 Selectivity in Alkaline Ethanol Oxidation Reaction

Direct ethanol fuel cells are among the most efficient and environmentally friendly energy-conversion devices and have been widely focused. The ethanol oxidation reaction (EOR) is a multielectron process with slow kinetics. The large amount of by-product generated by incomplete oxidation greatly reduces the efficiency of energy conversion through the EOR. In this study, a novel type of trimetallene called porous PdWM (M = Nb, Mo and Ta) is synthesized by a facile method. The mass activity (15.6 A mgPd -1 ) and C1 selectivity (55.5%) of Pd50 W27 Nb23 /C trimetallene, obtained after optimizing the compositions and proportions of porous PdWM, outperform those of commercial Pt/C (1.3 A mgPt -1 , 5.9%), Pd/C (5.0 A mgPd -1 , 7.2%), and Pd97 W3 /C bimetallene (9.5 A mgPd -1 , 14.1%). The mechanism by which Pd50 W27 Nb23 /C enhances the EOR performance is evaluated by in situ Fourier transform infrared spectroscopy and density functional theory calculations. It is found that W and Nb enhance the adsorption of CH3 CH2 OH and oxophilic high-valence Nb accelerates the subsequent oxidation of CO and CHx species. Moreover, Nb promotes the cleavage of CC bonds and increases the C1 selectivity. Pd60 W28 Mo12 /C and Pd64 W27 Ta9 /C trimetallene synthesized by the same method also exhibit excellent EOR performance.