3D Heterogeneous Device Arrays for Multiplexed Sensing Platforms Using Transfer of Perovskites

Ultraflexible Wireless Imager Integrated with Organic Circuits for Broadband Infrared Thermal Analysis

Flexible imagers are currently under intensive development as versatile optical sensor arrays, designed to capture images of surfaces and internals, irrespective of their shape. A significant challenge in developing flexible imagers is extending their detection capabilities to encompass a broad spectrum of infrared light, particularly terahertz (THz) light at room temperature. This advancement is crucial for thermal and biochemical applications. In this study, a flexible infrared imager is designed using uncooled carbon nanotube (CNT) sensors and organic circuits. The CNT sensors, fabricated on ultrathin 2.4 µm substrates, demonstrate enhanced sensitivity across a wide infrared range, spanning from near-infrared to THz wavelengths. Moreover, they retain their characteristics under bending and crumpling. The design incorporates light-shielded organic transistors and circuits, functioning reliably under light irradiation, and amplifies THz detection signals by a factor of 10. The integration of both CNT sensors and shielded organic transistors into an 8 × 8 active-sensor matrix within the imager enables sequential infrared imaging and nondestructive assessment for heat sources and in-liquid chemicals through wireless communication systems. The proposed imager, offering unique functionality, shows promise for applications in biochemical analysis and soft robotics.

Smart Contact Lenses as Wearable Ophthalmic Devices for Disease Monitoring and Health Management

The eye contains a complex network of physiological information and biomarkers for monitoring disease and managing health, and ocular devices can be used to effectively perform point-of-care diagnosis and disease management. This comprehensive review describes the target biomarkers and various diseases, including ophthalmic diseases, metabolic diseases, and neurological diseases, based on the physiological and anatomical background of the eye. This review also includes the recent technologies utilized in eye-wearable medical devices and the latest trends in wearable ophthalmic devices, specifically smart contact lenses for the purpose of disease management. After introducing other ocular devices such as the retinal prosthesis, we further discuss the current challenges and potential possibilities of smart contact lenses.

A Universal Fabrication Strategy for High-Resolution Perovskite-Based Photodetector Arrays

Metal halide perovskite photodetector arrays have demonstrated great potential applications in the field of integrated systems, optical communications, and health monitoring. However, the fabrication of large-scale and high-resolution device is still challenging due to their incompatibility with the polar solvents. Here, a universal fabrication strategy that utilizes ultrathin encapsulation-assisted photolithography and etching to create high-resolution photodetectors array with vertical crossbar structure is reported. This approach yields a 48 × 48 photodetector array with a resolution of 317 ppi. The device shows good imaging capability with a high on/off ratio of 3.3 × 105 and long-term working stability over 12 h. Furthermore, this strategy can be applied to five different material systems, and is fully compatible with the existing photolithography and etching techniques, which are expected to have potential applications in the other high-density and solvent-sensitive devices array, including perovskite- or organic semiconductor-based memristor, light emitting diode displays, and transistors.

Enabling low-drift flexible perovskite photodetectors by electrical modulation for wearable health monitoring and weak light imaging

Metal halide perovskites are promising for next-generation flexible photodetectors owing to their low-temperature solution processability, mechanical flexibility, and excellent photoelectric properties. However, the defects and notorious ion migration in polycrystalline metal halide perovskites often lead to high and unstable dark current, thus deteriorating their detection limit and long-term operations. Here, we propose an electrical field modulation strategy to significantly reduce the dark current of metal halide perovskites-based flexible photodetector more than 1000 times (from ~5 nA to ~5 pA). Meanwhile, ion migration in metal halide perovskites is effectively suppressed, and the metal halide perovskites-based flexible photodetector shows a long-term continuous operational stability (~8000 s) with low signal drift (~4.2 × 10-4 pA per second) and ultralow dark current drift (~1.3 × 10-5 pA per second). Benefitting from the electrical modulation strategy, a high signal-to-noise ratio wearable photoplethysmography sensor and an active-matrix photodetector array for weak light imaging are successfully demonstrated. This work offers a universal strategy to improve the performance of metal halide perovskites for wearable flexible photodetector and image sensor applications.

Regulation of Quantum Wells Width Distribution in Quasi-2D Perovskite Films for High-Performance Photodetectors

Dynamic optimization of the quantum-well (QW) width distribution in quasi-2D halide perovskite thin films is an effective approach for tuning the properties of photoelectric devices. Here, that the QWs width distribution in quasi-2D perovskite films can be controlled only by using hydroiodic acid (HI) as an additive is demonstrated. A uniform distribution of the colloidal particle size in the quasi-2D perovskite precursor solution is achieved through the formation of soluble iodoplumbate coordination complexes, PbI₃ ^- from the reaction of HI with PbI₂ , resulting in an improved phase purity in the final film. Density functional theory calculations indicate that the ideal n value quasi-2D perovskite reaction pathway through the PbI₃ ^- complex has a lower enthalpy of formation than the random nucleation pathway without the HI additive. Benefiting from this merit, a high-quality quasi-2D perovskite film with optimized phase purity delivered a balanced carrier diffusion length and improved carrier mobility. The resultant photodetectors exhibited a light on/off ratio of 50 000, a responsivity of 0.96 A W^-1 , and a detectivity of 5.7 × 10¹² Jones at 532 nm. In addition, the state-of-the-art device maintained more than 80% of its initial photocurrent after 720 h of storage at 30% relative humidity.

Highly Efficient and Stable Self-Powered Mixed Tin-Lead Perovskite Photodetector Used in Remote Wearable Health Monitoring Technology

Realization of remote wearable health monitoring (RWHM) technology for the flexible photodiodes is highly desirable in remote-sensing healthcare systems used in space stations, oceans, and forecasting warning, which demands high external quantum efficiency (EQE) and detectivity in NIR region. Traditional inorganic photodetectors (PDs) are mechanically rigid and expensive while the widely reported solution-processed mixed tin-lead (MSP) perovskite photodetectors (PPDs) exhibit a trade-off between EQE and detectivity in the NIR region. Herein, a novel functional passivating antioxidant (FPA) strategy has been introduced for the first time to simultaneously improve crystallization, restrain Sn²⁺ oxidization, and reduce defects in MSP perovskite films by multiple interactions between thiophene-2-carbohydrazide (TAH) molecules and cations/anions in MSP perovskite. The resultant solution-processed rigid mixed Sn-Pb PPD simultaneously achieves high EQE (75.4% at 840 nm), detectivity (1.8 × 10¹² Jones at 840 nm), ultrafast response time (t_rise /t_fall = 94 ns/97 ns), and improved stability. This work also highlights the demonstration of the first flexible photodiode using MSP perovskite and FPA strategy with remarkably high EQE (75% at 840 nm), and operational stability. Most importantly, the RWHM is implemented for the first time in the PIN MSP perovskite photodiodes to remotely monitor the heart rate of humans at rest and after-run conditions.

A Perovskite Photodetector Crossbar Array by Vapor Deposition for Dynamic Imaging

With the development of perovskite photodetectors, integrating photodetectors into array image sensors is the next target to pursue. The major obstacle to integrating perovskite photodiodes for dynamic imaging is the optoelectrical crosstalk among the pixels. Herein, a perovskite photodiode-blocking diode (PIN-BD) crossbar array with pixel-wise rectifying property by the vapor deposition method is presented. The PIN-BD shows a large rectification ratio of 3.3 × 10² under illumination, suppressing electrical crosstalk to as small as 8.0% in the imaging array. The fast response time of 72.8 ns allows real-time image acquisition by over 25 frames per second. The imaging sensor exhibits excellent imaging capability with a large linear dynamic range of 112 dB with 4096 gray levels and weak light sensitivity under 1.2 lux.

Split-Ring Structured All-Inorganic Perovskite Photodetector Arrays for Masterly Internet of Things

Photodetectors with long detection distances and fast response are important media in constructing a non-contact human-machine interface for the Masterly Internet of Things (MIT). All-inorganic perovskites have excellent optoelectronic performance with high moisture and oxygen resistance, making them one of the promising candidates for high-performance photodetectors, but a simple, low-cost and reliable fabrication technology is urgently needed. Here, a dual-function laser etching method is developed to complete both the lyophilic split-ring structure and electrode patterning. This novel split-ring structure can capture the perovskite precursor droplet efficiently and achieve the uniform and compact deposition of CsPbBr3 films. Furthermore, our devices based on laterally conducting split-ring structured photodetectors possess outstanding performance, including the maximum responsivity of 1.44 × 105 mA W-1, a response time of 150 μs in 1.5 kHz and one-unit area < 4 × 10-2 mm2. Based on these split-ring photodetector arrays, we realized three-dimensional gesture detection with up to 100 mm distance detection and up to 600 mm s-1 speed detection, for low-cost, integrative, and non-contact human-machine interfaces. Finally, we applied this MIT to wearable and flexible digital gesture recognition watch panel, safe and comfortable central controller integrated on the car screen, and remote control of the robot, demonstrating the broad potential applications.

Multimodal Characterization of Cardiac Organoids Using Integrations of Pressure-Sensitive Transistor Arrays with Three-Dimensional Liquid Metal Electrodes

Herein, we present an unconventional method for multimodal characterization of three-dimensional cardiac organoids. This method can monitor and control the mechanophysiological parameters of organoids within a single device. In this method, local pressure distributions of human-induced pluripotent stem-cell-derived cardiac organoids are visualized spatiotemporally by an active-matrix array of pressure-sensitive transistors. This array is integrated with three-dimensional electrodes formed by the high-resolution printing of liquid metal. These liquid-metal electrodes are inserted inside an organoid to form the intraorganoid interface for simultaneous electrophysiological recording and stimulation. The low mechanical modulus and low impedance of the liquid-metal electrodes are compatible with organoids' soft biological tissue, which enables stable electric pacing at low thresholds. In contrast to conventional electrophysiological methods, this measurement of a cardiac organoid's beating pressures enabled simultaneous treatment of electrical therapeutics using a single device without any interference between the pressure signals and electrical pulses from pacing electrodes, even in wet organoid conditions.

Mass Transfer Printing of Metal-Halide Perovskite Films and Nanostructures

Most methods of depositing perovskite films cannot meet the diverse requirements of real applications such as depositing films on various types of substrates, making patterns with different bandgaps for full-color display. Here, a robust mass transfer method of perovskite films and nanostructures is reported, meeting those requirements, by using an ultrathin branched polyethylenimine as interfacial chemical bonding layers. The transfer-printed perovskite films exhibit comparable morphology, composition, optoelectronic properties, and device performances with the counterparts made by optimized spin-coating methods. The perovskite light-emitting diodes (PeLEDs) using the transfer-printed films show decent external quantum efficiencies of 10.5% and 6.7% for red (680 nm) and sky-blue (493 nm) emissions, which are similar to the devices made by spin-coating. This robust transfer printing method also enables the the preparation of perovskite micropatterns with a high resolution up to 1270 pixels per inch. Horizontally aligned red and sky-blue perovskite microstripes are further obtained through multiple printing processes for white PeLEDs. This work demonstrates a feasible strategy for making perovskite films or micropatterns on various substrates for real applications in full-color display, white LEDs, lasing, etc.

High-Resolution 3D Printing for Electronics

The ability to form arbitrary 3D structures provides the next level of complexity and a greater degree of freedom in the design of electronic devices. Since recent progress in electronics has expanded their applicability in various fields in which structural conformability and dynamic configuration are required, high-resolution 3D printing technologies can offer significant potential for freeform electronics. Here, the recent progress in novel 3D printing methods for freeform electronics is reviewed, with providing a comprehensive study on 3D-printable functional materials and processes for various device components. The latest advances in 3D-printed electronics are also reviewed to explain representative device components, including interconnects, batteries, antennas, and sensors. Furthermore, the key challenges and prospects for next-generation printed electronics are considered, and the future directions are explored based on research that has emerged recently.

Retinomorphic optoelectronic devices for intelligent machine vision

Biological visual system can efficiently handle optical information within the retina and visual cortex of the brain, which suggests an alternative approach for the upgrading of the current low-intelligence, large energy consumption, and complex circuitry of the artificial vision system for high-performance edge computing applications. In recent years, retinomorphic machine vision based on the integration of optoelectronic image sensors and processors has been regarded as a promising candidate to improve this phenomenon. This novel intelligent machine vision technology can perform information preprocessing near or even within the sensor in the front end, thereby reducing the transmission of redundant raw data and improving the efficiency of the back-end processor for high-level computing tasks. In this contribution, we try to present a comprehensive review on the recent progress achieved in this emergent field.

Highly Sensitive Ultraviolet and Visible Wavelength Sensor Composed of Two Identical Perovskite Nanofilm Photodetectors

This work reports the design of a wavelength sensor composed of two identical perovskite (FA_0.85 Cs_0.15 PbI₃ ) photodetectors (PDs) that are capable of discriminating incident wavelength in a quantitative way. Due to strong wavelength-dependent absorption coefficient, the penetration depth of the photons in the FA_0.85 Cs_0.15 PbI₃ nanofilms increases with the increasing wavelength, leading to a gradual decrease of photo-generated current for PD1, but an increase of photocurrent in PD2, according to the theoretical simulation of Technology Computer Aided Design. This special evolution of photo-generated current as a function of wavelength facilitates the quantitative determination of the wavelength since the current ratio of both PDs monotonously decreases with the increase of wavelength from 265 to 810 nm. The average absolute error and the average relative error are estimated to be 7.6 nm and 1.68%, respectively, which are much better than other semiconductors materials-based wavelength sensors previously reported. It is believed that the present perovskite film-based wavelength sensor will have potential application in the future color/spectrum optoelectronic devices.