Structures and Materials in Stretchable Electroluminescent Devices

Alternating current electroluminescence devices: recent advances and functional applications

Wearable smart devices and visualisation sensors based on alternating current electroluminescence (ACEL) have received considerable attention in recent years. Due to the unique properties of ACEL devices, such as high mechanical strength, adaptability to complex environments, and no need for energy level matching, ACEL is suitable for multifunctional applications and visualisation sensing platforms. This review comprehensively outlines the latest developments in ACEL devices, starting with an analysis of the mechanism, classification, and optimisation strategies of ACEL. It introduces the functional applications of ACEL in multicolour displays, high-durability displays, stretchable and wearable displays, and autonomous function displays. Particularly, it emphasises the research progress of ACEL in sensory displays under interactive conditions such as liquid sensing, environmental factor sensing, kinetic energy sensing, and biosensing. Finally, it forecasts the challenges and new opportunities faced by future functional and interactive ACEL devices in fields such as artificial intelligence, smart robotics, and human-computer interaction.

Stretchable OLEDs based on a hidden active area for high fill factor and resolution compensation

Stretchable organic light-emitting diodes (OLEDs) have emerged as promising optoelectronic devices with exceptional degree of freedom in form factors. However, stretching OLEDs often results in a reduction in the geometrical fill factor (FF), that is the ratio of an active area to the total area, thereby limiting their potential for a broad range of applications. To overcome these challenges, we propose a three-dimensional (3D) architecture adopting a hidden active area that serves a dual role as both an emitting area and an interconnector. For this purpose, an ultrathin OLED is first attached to a 3D rigid island array structure through quadaxial stretching for precise, deformation-free alignment. A portion of the ultrathin OLED is concealed by letting it 'fold in' between the adjacent islands in the initial, non-stretched condition and gradually surfaces to the top upon stretching. This design enables the proposed stretchable OLEDs to exhibit a relatively high FF not only in the initial state but also after substantial deformation corresponding to a 30% biaxial system strain. Moreover, passive-matrix OLED displays that utilize this architecture are shown to be configurable for compensation of post-stretch resolution loss, demonstrating the efficacy of the proposed approach in realizing the full potential of stretchable OLEDs.

Stretchable and Breathable Electroluminescent Displays Based on Ultrathin Nanocomposite Designs

Stretchable electroluminescent devices represent an emerging optoelectronic technology for future wearables. However, their typical construction on sub-millimeter-thick elastomers has limited moisture permeability, leading to discomfort during long-term skin attachment. Although breathable textile displays may partially address this issue, they often have distinct visual appearances with discrete emissions from fibers or fiber junctions. This study introduces a convenient procedure to create stretchable, permeable displays with continuous luminous patterns. The design utilizes ultrathin nanocomposite devices embedded in a porous elastomeric microfoam to achieve high moisture permeability. These displays also exhibit excellent deformability, low-voltage operation, and excellent durability. Additionally, the device is decorated with fluorinated silica nanoparticles to achieve self-cleaning and washable capabilities. The practical implementation of these nanocomposite devices is demonstrated by creating an epidermal counter display that allows intimate integration with the human body. These developments provide an effective design of stretchable and breathable displays for comfortable wearing.

Optical Phenomena in Molecule-Based Magnetic Materials

Since the last century, we have witnessed the development of molecular magnetism which deals with magnetic materials based on molecular species, i.e., organic radicals and metal complexes. Among them, the broadest attention was devoted to molecule-based ferro-/ferrimagnets, spin transition materials, including those exploring electron transfer, molecular nanomagnets, such as single-molecule magnets (SMMs), molecular qubits, and stimuli-responsive magnetic materials. Their physical properties open the application horizons in sensors, data storage, spintronics, and quantum computation. It was found that various optical phenomena, such as thermochromism, photoswitching of magnetic and optical characteristics, luminescence, nonlinear optical and chiroptical effects, as well as optical responsivity to external stimuli, can be implemented into molecule-based magnetic materials. Moreover, the fruitful interactions of these optical effects with magnetism in molecule-based materials can provide new physical cross-effects and multifunctionality, enriching the applications in optical, electronic, and magnetic devices. This Review aims to show the scope of optical phenomena generated in molecule-based magnetic materials, including the recent advances in such areas as high-temperature photomagnetism, optical thermometry utilizing SMMs, optical addressability of molecular qubits, magneto-chiral dichroism, and opto-magneto-electric multifunctionality. These findings are discussed in the context of the types of optical phenomena accessible for various classes of molecule-based magnetic materials.

Fully Printable and Reconfigurable Hufu-type Electroluminescent Devices for Visualized Encryption

Hufu, serving as evidence of imperial authorization in ancient China, comprises two parts in the form of tiger-shaped tallies that only become effective when matched. Drawing inspiration from the concept of Hufu, a reconfigurable electroluminescent (EL) device is designed by separating conventional integral devices into two parts that contain the EL layer (part A) and the transparent electrode (part B), respectively. The key to realizing such strategy is employing an adhesive and stretchable polymer gel composite as the transparent electrodes for the EL devices. The polymer gel composite facilitates robust yet reversible contact between the EL layer and transparent electrode, enabling high-performance and stretchable EL devices that can be readily disassembled and reassembled: the EL devices can maintain ≈81% of their initial luminance after 1000 times of repeated disassembly and reassembly. Moreover, the precursor ink of the polymer gel composite is compatible with a wide variety of coating and printing technologies, such as spin-coating, inkjet printing, dispensing, and brush painting. Importantly, the reconfigurable feature of the devices opens up a new path to encryption display systems, and as a proof-of-concept, EL encrypted password, and content-changeable digital clock are demonstrated.

Solid-state, liquid-free ion-conducting elastomers: rising-star platforms for flexible intelligent devices

Soft ionic conductors have emerged as a powerful toolkit to engineer transparent flexible intelligent devices that go beyond their conventional counterparts. Particularly, due to their superior capacities of eliminating the evaporation, freezing and leakage issues of the liquid phase encountered with hydrogels, organohydrogels and ionogels, the emerging solid-state, liquid-free ion-conducting elastomers have been largely recognized as ideal candidates for intelligent flexible devices. However, despite their extensive development, a comprehensive and timely review in this emerging field is lacking, particularly from the perspective of design principles, advanced manufacturing, and distinctive applications. Herein, we present (1) the design principles and intriguing merits of solid-state, liquid-free ion-conducting elastomers; (2) the methods to manufacture solid-state, liquid-free ion-conducting elastomers with preferential architectures and functions using advanced technologies such as 3D printing; (3) how to leverage solid-state, liquid-free ion-conducting elastomers in exploiting advanced applications, especially in the fields of flexible wearable sensors, bioelectronics and energy harvesting; (4) what are the unsolved scientific and technical challenges and future opportunities in this multidisciplinary field. We envision that this review will provide a paradigm shift to trigger insightful thinking and innovation in the development of intelligent flexible devices and beyond.

Porous Conductive Textiles for Wearable Electronics

Over the years, researchers have made significant strides in the development of novel flexible/stretchable and conductive materials, enabling the creation of cutting-edge electronic devices for wearable applications. Among these, porous conductive textiles (PCTs) have emerged as an ideal material platform for wearable electronics, owing to their light weight, flexibility, permeability, and wearing comfort. This Review aims to present a comprehensive overview of the progress and state of the art of utilizing PCTs for the design and fabrication of a wide variety of wearable electronic devices and their integrated wearable systems. To begin with, we elucidate how PCTs revolutionize the form factors of wearable electronics. We then discuss the preparation strategies of PCTs, in terms of the raw materials, fabrication processes, and key properties. Afterward, we provide detailed illustrations of how PCTs are used as basic building blocks to design and fabricate a wide variety of intrinsically flexible or stretchable devices, including sensors, actuators, therapeutic devices, energy-harvesting and storage devices, and displays. We further describe the techniques and strategies for wearable electronic systems either by hybridizing conventional off-the-shelf rigid electronic components with PCTs or by integrating multiple fibrous devices made of PCTs. Subsequently, we highlight some important wearable application scenarios in healthcare, sports and training, converging technologies, and professional specialists. At the end of the Review, we discuss the challenges and perspectives on future research directions and give overall conclusions. As the demand for more personalized and interconnected devices continues to grow, PCT-based wearables hold immense potential to redefine the landscape of wearable technology and reshape the way we live, work, and play.

Low-dimensional nanostructures for monolithic 3D-integrated flexible and stretchable electronics

Flexible/stretchable electronics, which are characterized by their ultrathin design, lightweight structure, and excellent mechanical robustness and conformability, have garnered significant attention due to their unprecedented potential in healthcare, advanced robotics, and human-machine interface technologies. An increasing number of low-dimensional nanostructures with exceptional mechanical, electronic, and/or optical properties are being developed for flexible/stretchable electronics to fulfill the functional and application requirements of information sensing, processing, and interactive loops. Compared to the traditional single-layer format, which has a restricted design space, a monolithic three-dimensional (M3D) integrated device architecture offers greater flexibility and stretchability for electronic devices, achieving a high-level of integration to accommodate the state-of-the-art design targets, such as skin-comfort, miniaturization, and multi-functionality. Low-dimensional nanostructures possess small size, unique characteristics, flexible/elastic adaptability, and effective vertical stacking capability, boosting the advancement of M3D-integrated flexible/stretchable systems. In this review, we provide a summary of the typical low-dimensional nanostructures found in semiconductor, interconnect, and substrate materials, and discuss the design rules of flexible/stretchable devices for intelligent sensing and data processing. Furthermore, artificial sensory systems in 3D integration have been reviewed, highlighting the advancements in flexible/stretchable electronics that are deployed with high-density, energy-efficiency, and multi-functionalities. Finally, we discuss the technical challenges and advanced methodologies involved in the design and optimization of low-dimensional nanostructures, to achieve monolithic 3D-integrated flexible/stretchable multi-sensory systems.

High-Performance Pressure Sensors Based on Shaped Gel Droplet Arrays

Polymer gel-based pressure sensors offer numerous advantages over traditional sensing technologies, including excellent conformability and integration into wearable devices. However, challenges persist in terms of their performance and manufacturing technology. In this study, a method for fabricating gel pressure sensors using a hydrophobic/hydrophilic patterned surface is introduced. By shaping and fine-tuning the droplets of the polymer gel prepolymerization solution on the patterned surface, remarkable sensitivity improvements compared to unshaped hydrogels have been achieved. This also showcased the potential for tailoring gel pressure sensors to different applications. By optimizing the configuration of the sensor array, an uneven conductive gel array is fabricated, which exhibited a high sensitivity of 0.29 kPa-1 in the pressure range of 0-30 kPa, while maintaining a sensitivity of 0.13 kPa-1 from 30 kPa up to 100 kPa. Furthermore, the feasibility of using these sensors for human motion monitoring is explored and a conductive gel array for 2D force detection is successfully developed. This efficient and scalable fabrication method holds promise for advancing pressure sensor technology and offers exciting prospects for various industries and research fields.

Intrinsically Stretchable and Healable Polymer Semiconductors

In recent decades, polymer semiconductors, extensively employed as charge transport layers in devices like organic field-effect transistors (OFETs), have undergone thorough investigation due to their capacity for large-area solution processing, making them promising for mass production. Research efforts have been twofold: enhancing the charge mobilities of polymer semiconductors and augmenting their mechanical properties to meet the demands of flexible devices. Significant progress has been made in both realms, propelling the practical application of polymer semiconductors in flexible electronics. However, integrating excellent semiconducting and mechanical properties into a single polymer still remains a significant challenge. This review intends to introduce the design strategies and discuss the properties of high-charge mobility stretchable conjugated polymers. In addition, another key challenge faced in this cutting-edge field is maintaining stable semiconducting performance during long-term mechanical deformations. Therefore, this review also discusses the development of healable polymer semiconductors as a promising avenue to improve the lifetime of stretchable device. In conclusion, challenges and outline future research perspectives in this interdisciplinary field are highlighted.

Structural and Material-Based Approaches for the Fabrication of Stretchable Light-Emitting Diodes

Stretchable displays, capable of freely transforming their shapes, have received significant attention as alternatives to conventional rigid displays, and they are anticipated to provide new opportunities in various human-friendly electronics applications. As a core component of stretchable displays, high-performance stretchable light-emitting diodes (LEDs) have recently emerged. The approaches to fabricate stretchable LEDs are broadly categorized into two groups, namely "structural" and "material-based" approaches, based on the mechanisms to tolerate strain. While structural approaches rely on specially designed geometries to dissipate applied strain, material-based approaches mainly focus on replacing conventional rigid components of LEDs to soft and stretchable materials. Here, we review the latest studies on the fabrication of stretchable LEDs, which is accomplished through these distinctive strategies. First, we introduce representative device designs for efficient strain distribution, encompassing island-bridge structures, wavy buckling, and kirigami-/origami-based structures. For the material-based approaches, we discuss the latest studies for intrinsically stretchable (is-) electronic/optoelectronic materials, including the formation of conductive nanocomposite and polymeric blending with various additives. The review also provides examples of is-LEDs, focusing on their luminous performance and stretchability. We conclude this review with a brief outlook on future technologies.

Axially Encoded Mechano-Metafiber Electronics by Local Strain Engineering

Multimaterial integration, such as soft elastic and stiff components, exhibits rich deformation and functional behaviors to meet complex needs. Integrating multimaterials in the level of individual fiber is poised to maximize the functional design capacity of smart wearable electronic textiles, but remains unfulfilled. Here, this work continuously integrates stiff and soft elastic components into single fiber to fabricate encoded mechano-metafiber by programmable microfluidic sequence spinning (MSS). The sequences with programmable modulus feature the controllable localization of strain along metafiber length. The mechano-metafibers feature two essential nonlinear deformation modes, which are local strain amplification and retardation. This work extends the sequence-encoded metafiber into fiber networks to exhibit greatly enhanced strain amplification and retardation capability in cascades. Local strain engineering enables the design of highly sensitive strain sensors, stretchable fiber devices to protect brittle components and the fabrication of high-voltage supercapacitors as well as axial electroluminescent arrays. The approach allows the scalably design of multimaterial metafibers with programmable localized mechanical properties for woven metamaterials, smart textiles, and wearable electronics.

Assembled one-dimensional nanowires for flexible electronic devices via printing and coating: Techniques, applications, and perspectives

The rapid progress in flexible electronic devices has necessitated continual research into nanomaterials, structural design, and fabrication processes. One-dimensional nanowires, characterized by their distinct structures and exceptional properties, are considered essential components for various flexible electronic devices. Considerable attention has been directed toward the assembly of nanowires, which presents significant advantages. Printing and coating techniques can be used to assemble nanowires in a relatively simple, efficient, and cost-competitive manner and exhibit potential for scale-up production in the foreseeable future. This review aims to provide an overview of nanowire assembly using printing and coating techniques, such as bar coating, spray coating, dip coating, blade coating, 3D printing, and so forth. The application of assembled nanowires in flexible electronic devices is subsequently discussed. Finally, further discussion is presented on the potential and challenges of flexible electronic devices based on assembled nanowires via printing and coating.

Humanoid Intelligent Display Platform for Audiovisual Interaction and Sound Identification

This study proposes a rational strategy for the design, fabrication and system integration of the humanoid intelligent display platform (HIDP) to meet the requirements of highly humanized mechanical properties and intelligence for human-machine interfaces. The platform's sandwich structure comprises a middle light-emitting layer and surface electrodes, which consists of silicon elastomer embedded with phosphor and silk fibroin ionoelastomer, respectively. Both materials are highly stretchable and resilient, endowing the HIDP with skin-like mechanical properties and applicability in various extreme environments and complex mechanical stimulations. Furthermore, by establishing the numerical correlation between the amplitude change of animal sounds and the brightness variation, the HIDP realizes audiovisual interaction and successful identification of animal species with the aid of Internet of Things (IoT) and machine learning techniques. The accuracy of species identification reaches about 100% for 200 rounds of random testing. Additionally, the HIDP can recognize animal species and their corresponding frequencies by analyzing sound characteristics, displaying real-time results with an accuracy of approximately 99% and 93%, respectively. In sum, this study offers a rational route to designing intelligent display devices for audiovisual interaction, which can expedite the application of smart display devices in human-machine interaction, soft robotics, wearable sound-vision system and medical devices for hearing-impaired patients.

Intrinsically Stretchable and Efficient Fully Π-Conjugated Polymer via Internal Plasticization for Flexible Deep-Blue Polymer Light-Emitting Diodes with CIEy = 0.08

Intrinsically stretchable polymeric semiconductors are essential to flexible polymer light-emitting diodes (PLEDs) owing to their excellent strain tolerance capacity under long-time deformation operation. Obtaining intrinsic stretchability, robust emission properties, and excellent charge-transport behavior simultaneously from fully π-conjugated polymers (FCPs) is difficult, particularly for applications in deep-blue PLEDs. Herein, an internal plasticization strategy is proposed to introduce a phenyl-ester plasticizer into polyfluorenes (PF-MC4, PF-MC6, and PF-MC8) for narrowband deep-blue flexible PLEDs. Compared with controlled poly[4-(octyloxy)-9,9-diphenylfluoren-2,7-diyl]-co-[5-(octyloxy)-9,9-diphenylfluoren-2,7-diyl] (PODPFs) (2.5%), the freestanding PF-MC8 thin film shows a fracture strain of >25%. The three stretchable films exhibit stable and efficient deep-blue emission (PLQY > 50%) because of the encapsulation of π-conjugated backbone via pendant phenyl-ester plasticizers. The PF-MC8-based PLEDs show deep-blue emission, which corresponds to CIE and EQE values of (0.16, 0.10) and 1.06%, respectively. Finally, the narrowband deep-blue electroluminescence (FWHM of ≈25 nm; CIE coordinates: (0.15, 0.08)) and performance of the transferred PLEDs based on the PF-MC8 stretchable film are independent of the tensile ratio (up to 45%); however, they show a maximum brightness of 1976 cd m-2 at a ratio of 35%. Therefore, internal plasticization is a promising approach for designing intrinsically stretchable FCPs for flexible electronics.

Polymerizable Solvent-free Organic Liquids: A New Approach for Large Area Flexible and Foldable Luminescent Films

The high demand for light-emitting and display devices made luminescent organic materials as attractive candidates. Solvent-free organic liquids are one of the promising emitters among them due to the salient features. However, the inherent limitations of forming sticky and noncurable surfaces must be addressed to become an alternate emitter for large-area device applications. Herein, we functionalized solvent-free organic liquids having monomeric emission in bulk with polymerizable groups to improve the processability. The polymerizable group on carbazole, naphthalene monoimide, and diketopyrrolopyrrole-based solvent-free liquid emitters enabled on-surface polymerization. These emitters alone and in combinations can be directly coated on a glass substrate without the help of solvents. Subsequent photo or thermal polymerization leads to stable, non-sticky, flexible, foldable, and free-standing large-area films with reasonably high quantum yield. Our demonstration of the tunable and white light-emitting films using polymerizable solvent-free liquids might be a potential candidate in flexible/foldable/stretchable electronics. The new concept of polymerizable liquid can be extended to other functional features suitable for futuristic applications.

A solution-processable and highly flexible conductor of a fluoroelastomer FKM and carbon nanotubes with tuned electrical conductivity and mechanical performance

The use of fluoroelastomer nanocomposites for flexible electronics is increasing due to their high deformability and recoverability. Often, a high amount of conductive nanofillers and crosslinking agents is required to improve their mechanical performance, which unfavorably affects the electrical percolation threshold and conductivity due to dispersion issues. Herein, we developed a unique solution mixing (SM) technique by a fine-tuned formulation to obtain well-dispersed carbon nanotubes (CNTs) in fluoroelastomer FKM for both low and high CNT concentrations (0.2 phr and 3 phr). Effective nano-network formation was confirmed by transmission electron microscopy (TEM) and oscillatory shear rheological tests. Compared to the melt mixing (MM) process, the stretchability of neat FKM improves to 503% in the SM process versus 430% in the MM process. The electrical conductivity of the SM samples percolates at significantly lower filler concentrations (i.e., 0.35 phr in SM vs. 0.45 phr in MM) with a maximum value of 7 × 10^-1 S cm^-1 for 3 phr. Overall, the 2 phr CNT/FKM nanocomposite fabricated by SM exceeds those of carbon-based FKM conductors reported in the literature. The enhanced electrical and mechanical properties include an electrical conductivity of 3 × 10^-1 S cm^-1, a strain-to-failure of 300%, and a tensile strength at break of 12 MPa. This process is a promising approach for fabricating fluoroelastomer nanocomposites of a mechanically robust and stable stretchable conductor for various wearable electronic devices.

Soft and Stretchable Liquid Metal-Elastomer Composite for Wearable Electronics

Soft devices, especially capacitive stress (or strain) sensors, are important for applications, including wearable medical monitoring, electronic skin, and soft robotics. The incorporation of liquid metal particles (LMPs) into highly deformable elastomers as inclusions ameliorates the mechanical compliance caused by a rigid filler. The high dielectric constant and liquid feature of LMPs are suitable for soft sensors with high sensitivity and a large real-time dynamic detection range. Here, a class of LM-elastomer composites are introduced with elastic and high dielectric properties, making them uniquely suitable for the application of soft stress sensors. The prepared stretchable soft stress sensor can detect the bending degree of the finger, monitor physiological signals in real time, and distinguish the vibration from the pronunciation of different letters. The nanoscale X-ray computational tomography (nano-CT) measurements indeed detect the changes of LMPs under stress, i.e., LMPs in the matrix distribute from uneven to relatively uniform, agglomerate, and even connect each other to have a conduction path in the composition with high LMP contents, which cause the changes in the physical properties of devices under operation. The cognition of LMP changes in composites under stress is instructive for promoting their further applications in the field of soft devices.

Integrated 3D printing of flexible electroluminescent devices and soft robots

Flexible and stretchable light emitting devices are driving innovation in myriad applications, such as wearable and functional electronics, displays and soft robotics. However, the development of flexible electroluminescent devices via conventional techniques remains laborious and cost-prohibitive. Here, we report a facile and easily-accessible route for fabricating a class of flexible electroluminescent devices and soft robotics via direct ink writing-based 3D printing. 3D printable ion conducting, electroluminescent and insulating dielectric inks were developed, enabling facile and on-demand creation of flexible and stretchable electroluminescent devices with good fidelity. Robust interfacial adhesion with the multilayer electroluminescent devices endowed the 3D printed devices with attractive electroluminescent performance. Integrated our 3D printed electroluminescent devices with a soft quadrupedal robot and sensing units, an artificial camouflage that can instantly self-adapt to the environment by displaying matching color was fabricated, laying an efficient framework for the next generation soft camouflages.

Materials and design strategies for stretchable electroluminescent devices

Stretchable displays have recently received increasing attention as input and/or output interfaces for next-generation human-friendly electronic systems. Stretchable electroluminescent (EL) devices are a core component of stretchable displays, and they can be classified into two types, structurally stretchable EL devices and intrinsically stretchable EL devices, according to the mechanism for achieving their stretchability. We herein present recent advances in materials and design strategies for stretchable EL devices. First, stretchable devices based on ultrathin EL devices are introduced. Ultrathin EL devices are mechanically flexible like thin paper, and they can become stretchable through various structural engineering methods, such as inducing a buckled structure, employing interconnects with stretchable geometries, and applying origami/kirigami techniques. Secondly, intrinsically stretchable EL devices can be fabricated by using inherently stretchable electronic materials. For example, light-emitting electrochemical cells and EL devices with a simpler structure using alternating current have been developed. Furthermore, novel stretchable semiconductor materials have been presented for the development of intrinsically stretchable light-emitting diodes. After discussing these two types of stretchable EL devices, we briefly discuss applications of deformable EL devices and conclude the review.

A Self-Assembled 3D Penetrating Nanonetwork for High-Performance Intrinsically Stretchable Polymer Light-Emitting Diodes

The emergence of wearable technology can significantly benefit from electronic displays fabricated using intrinsically stretchable (is-) materials. Typically, an improvement in the stretchability of conventional light-emitting polymers is accompanied by a decrease in charge transportability, thus resulting in a significant decrease in device efficiency. In this study, a self-assembled 3D penetrating nanonetwork is developed to achieve increased stretchability and mobility simultaneously, based on high-molecular-weight phenylenevinylene (L-SY-PPV) and polyacrylonitrile (PAN). The mobility of L-SY-PPV/PAN increases by 5-6 times and the stretchability increases from 20% (pristine L-SY-PPV film) to 100%. A high current efficiency (CE) of 8.13 cd A^-1 is observed in polymer light-emitting diodes (PLEDs) fabricated using 40% stretched L-SY-PPV/PAN. Furthermore, using a polyethyleneimine ethoxylated (PEIE), an 1,10-phenanthroline monohydrate (pBphen), and a reduced Triton X-100 (TR) chelated Zn-based is- electron-injection layer of Zn-PEIE-pBphen-TR, an is-PLED is realized with a turn-on voltage of 6.5 V and a high CE of 2.35 cd A^-1 . These results demonstrate the effectiveness of using the self-assembled 3D penetrating nanonetwork for the fabrication of is-PLEDs.

Sustainable wood electronics by iron-catalyzed laser-induced graphitization for large-scale applications

Ecologically friendly wood electronics will help alleviating the shortcomings of state-of-art cellulose-based “green electronics”. Here we introduce iron-catalyzed laser-induced graphitization (IC-LIG) as an innovative approach for engraving large-scale electrically conductive structures on wood with very high quality and efficiency, overcoming the limitations of conventional LIG including high ablation, thermal damages, need for multiple lasing steps, use of fire retardants and inert atmospheres. An aqueous bio-based coating, inspired by historical iron-gall ink, protects wood from laser ablation and thermal damage while promoting efficient graphitization and smoothening substrate irregularities. Large-scale (100 cm²), highly conductive (≥2500 S m⁻¹) and homogeneous surface areas are engraved single-step in ambient atmosphere with a conventional CO₂ laser, even on very thin (∼450 µm) wood veneers. We demonstrate the validity of our approach by turning wood into highly durable strain sensors, flexible electrodes, capacitive touch panels and an electroluminescent LIG-based device.

Ecologically friendly wood electronics will help alleviating the shortcomings of state-of-art cellulose-based green electronics. Here, the authors introduce iron-catalyzed laser-induced graphitization (IC-LIG) as an innovative approach for engraving large-scale electrically conductive structures on wood with high quality and efficiency.

Conductive Materials with Elaborate Micro/Nanostructures for Bioelectronics

Bioelectronics, an emerging field with the mutual penetration of biological systems and electronic sciences, allows the quantitative analysis of complicated biosignals together with the dynamic regulation of fateful biological functions. In this area, the development of conductive materials with elaborate micro/nanostructures has been of great significance to the improvement of high-performance bioelectronic devices. Thus, here, a comprehensive and up-to-date summary of relevant research studies on the fabrication and properties of conductive materials with micro/nanostructures and their promising applications and future opportunities in bioelectronic applications is presented. In addition, a critical analysis of the current opportunities and challenges regarding the future developments of conductive materials with elaborate micro/nanostructures for bioelectronic applications is also presented.