Electronically and Geometrically Modified Single-Atom Fe Sites by Adjacent Fe Nanoparticles for Enhanced Oxygen Reduction

Multiscale nanoengineering fabrication of air electrode catalysts in rechargeable Zn-air batteries

The development of cost-effective, high-activity and stable catalysts to accelerate the sluggish kinetics of cathodic oxygen reduction/evolution reactions (ORR/OER) plays a critical part in commercialization application of rechargeable Zn-air batteries (RZABs). Herein, a multiscale nanoengineering strategy is developed to simultaneously stabilize Co-doped Fe nanoparticles originated from metal-organic framework-derived approach and atomic Fe/Co sites derived from metal nanoparticle-atomized way on N-doped hierarchically tubular porous carbon substrate. Thereinto, metal nanoparticles and single atoms are respectively used to expedite the OER and ORR. Consequently, the final material is acted as an oxygen electrode catalyst, displaying 0.684 V of OER/ORR potential gap, 260 mW cm-2 of peak power density for liquid-state RZAB, 110 mW cm-2 of peak power density for solid-state RZAB, and 1000 charge-discharge cycles without decay, which confirms great potential for energy storage and conversion applications.

Electron Spin Broken-Symmetry of Fe-Co Diatomic Pairs to Promote Kinetics of Bifunctional Oxygen Electrocatalysis for Zinc-Air Batteries

Designing bifunctional catalysts to reduce the oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) reaction barriers while accelerating the reaction kinetics is perceived to be a promising strategy to improve the performance of Zinc-air batteries. Unsymmetric configuration in single-atom catalysts has attracted attention due to its unique advantages in regulating electron orbitals. In this work, a seesaw effect in unsymmetric Fe-Co bimetallic monoatomic configurations is proposed, which can effectively improve the OER/ORR bifunctional activity of the catalyst. Compared with the symmetrical model of Fe-Co, a strong charge polarization between Co and Fe atoms in the unsymmetric model is detected, in whom the spin-down electrons around Co atoms are much higher than those spin-up electrons. The seesaw effect occurred between Co atoms and Fe atoms, resulting in a negative shift of the d-band center, which means that the adsorption of oxygen intermediates is weakened and more conducive to their dissociation. The optimized reaction kinetics of the catalyst leads to excellent performance in ZABs, with a peak power density of 215 mW cm-2 and stable cycling for >1300 h and >4000 cycles. Flexible Zinc-air batteries have also gained excellent performance to demonstrate their potential in the field of flexible wearables.

Asymmetrical Interactions between Ni Single Atomic Sites and Ni Clusters in a 3D Porous Organic Framework for Enhanced CO2 Photoreduction

3D porous organic frameworks, which possess the advantages of high surface area and abundant exposed active sites, are considered ideal platforms to accommodate single atoms (SAs) and metal nanoclusters (NCs) in high-performance catalysts; however, very little research has been conducted in this field. In the present work, a 3D porous organic framework containing Ni1 SAs and Nin NCs is prepared through the metal-assisted one-pot polycondensation of tetraaldehyde and hexaaminotriptycene. The single metal sites and metal clusters confined in the 3D space created a favorable micro-environment that facilitated the activation of chemically inert CO2 molecules, thus promoting the overall photoconversion efficiency and selectivity of CO2 reduction. The 3D-NiSAs/NiNCs-POPs, as a CO2 photoreduction catalyst, demonstrated an exceptional CO production rate of 6.24 mmol g-1 h-1, high selectivity of 98%, and excellent stability. The theoretical calculations uncovered that asymmetrical interaction between Ni1 SAs and Nin NCs not only favored the bending of CO2 molecules and reducing the CO2 reduction energy, but also regulated the electronic structure of the catalyst leading to the optimal binding strength of intermediates.

Ordered mesoporous carbon with binary CoFe atomic species for highly efficient oxygen reduction electrocatalysis

The exploration of powerful, efficient and precious metal-free electrocatalysts for facilitating the sluggish kinetics of the oxygen reduction reaction (ORR) is a crucial endeavor in the development and application of energy conversion and storage devices. Herein, we have rationally designed and synthesized bimetallic CoFe species consisting of CoFe nanoparticles and atomically dispersed dual atoms anchored on an ordered mesoporous carbon matrix (CoFe/NC) as highly efficient ORR electrocatalysts. The pyrolyzation temperature for CoFe/NC plays a vital role in regulating the morphology and composition of both the carbon matrix and CoFe species. The optimized CoFe/NC-750 exhibits a favorable ORR performance in 0.1 M KOH with a high half-wave potential (E1/2) of 0.87 V vs. RHE, excellent tolerance to methanol and remarkable durability (no obvious decrease in E1/2 value after 3000 cycles), all of which are superior to the performance of commercial Pt/C. Experimental measurements and density functional theory (DFT) calculations reveal that the improved ORR performance of CoFe/NC-750 is mainly attributed to the electronic structure of atomically dispersed Fe active sites modulated by the surrounding CoFe alloys and Co single atoms, which accelerates the dissociation and reduction of intermediate OH* species and promotes the ORR process.

Ferredoxin-Inspired Design of S-Synergized Fe-Fe Dual-Metal Center Catalysts for Enhanced Electrocatalytic Oxygen Reduction Reaction

Dual-metal center catalysts (DMCs) have shown the ability to enhance the oxygen reduction reaction (ORR) owing to their distinctive structural configurations. However, the precise modulation of electronic structure and the in-depth understanding of synergistic mechanisms between dual metal sites of DMCs at the atomic level remain challenging. Herein, mimicking the ferredoxin, Fe-based DMCs (Fe2N6-S) are strategically designed and fabricated, in which additional Fe and S sites are synchronously installed near the Fe sites and serve as "dual modulators" for coarse- and fine-tuning of the electronic modulation, respectively. The as-prepared Fe2N6-S catalyst exhibits enhanced ORR activity and outstanding Zinc-air (Zn-air) battery performance compared to the conventional single Fe site catalysts. The theoretical and experimental results reveal that introducing the second metal Fe creates a dual adsorption site that alters the O2 adsorption configuration and effectively activates the O─O bond, while the synergistic effect of dual Fe sites results in the downward shift of the d-band center, facilitating the release of OH*. Additionally, local electronic engineering of heteroatom S for Fe sites further facilitates the formation of the rate-determining step OOH*, thus accelerating the reaction kinetics.

Single-Atomic Co-N4 Sites with CrCo Nanoparticles for Metal-Air Battery-Driven Hydrogen Evolution

Designing highly active and robust earth abundant trifunctional electrocatalysts for energy storage and conversion applications remain an enormous challenge. Herein, we report a trifunctional electrocatalyst (CrCo/CoN4@CNT-5), synthesized at low calcination temperature (550 °C), which consists of Co-N4 single atom and CrCo alloy nanoparticles and exhibits outstanding electrocatalytic performance for the hydrogen evolution reaction, oxygen evolution reaction, and oxygen reduction reaction. The catalyst is able to deliver a current density of 10 mA cm-2 in an alkaline electrolytic cell at a very low cell voltage of ∼1.60 V. When the catalyst is equipped in a liquid rechargeable Zn-air battery, it endowed a high open-circuit voltage with excellent cycling durability and outperformed the commercial Pt/C+IrO2 catalytic system. Furthermore, the Zn-air battery powered self-driven water splitting system is displayed using CrCo/CoN4@CNT-5 as sole trifunctional catalyst, delivering a high H2 evolution rate of 168 μmol h-1. Theoretical calculations reveal synergistic interaction between Co-N4 active sites and CrCo nanoparticles, favoring the Gibbs free energy for H2 evolution. The presence of Cr not only enhances the H2O adsorption and dissociation but also tunes the electronic property of CrCo nanoparticles to provide optimized hydrogen binding capacity to Co-N4 sites, thus giving rise to accelerated H2 evolution kinetics. This work highlights the importance of the presence of small quantity of Cr in enhancing the electrocatalytic activity as well as robustness of single-atom catalyst and suggests the design of the multifunctional robust electrocatalysts for long-term H2 evolution application.

Coupling Ni Single Atomic Sites with Metallic Aggregates at Adjacent Geometry on Carbon Support for Efficient Hydrogen Peroxide Electrosynthesis

Single atomic catalysts have shown great potential in efficiently electro-converting O2 to H2O2 with high selectivity. However, the impact of coordination environment and introduction of extra metallic aggregates on catalytic performance still remains unclear. Herein, first a series of carbon-based catalysts with embedded coupling Ni single atomic sites and corresponding metallic nanoparticles at adjacent geometry is synthesized. Careful performance evaluation reveals NiSA/NiNP-NSCNT catalyst with precisely controlled active centers of synergetic adjacent Ni-N4S single sites and crystalline Ni nanoparticles exhibits a high H2O2 selectivity over 92.7% within a wide potential range (maximum selectivity can reach 98.4%). Theoretical studies uncover that spatially coupling single atomic NiN4S sites with metallic Ni aggregates in close proximity can optimize the adsorption behavior of key intermediates *OOH to achieve a nearly ideal binding strength, which thus affording a kinetically favorable pathway for H2O2 production. This strategy of manipulating the interaction between single atoms and metallic aggregates offers a promising direction to design new high-performance catalysts for practical H2O2 electrosynthesis.

Atomically Dispersed Fe Sites Regulated by Adjacent Single Co Atoms Anchored on N-P Co-Doped Carbon Structures for Highly Efficient Oxygen Reduction Reaction

Manipulating the coordination environment and electron distribution for heterogeneous catalysts at the atomic level is an effective strategy to improve electrocatalytic performance but remains challenging. Herein, atomically dispersed Fe and Co anchored on nitrogen, phosphorus co-doped carbon hollow nanorod structures (FeCo-NPC) are rationally designed and synthesized. The as-prepared FeCo-NPC catalyst exhibits significantly boosted electrocatalytic kinetics and greatly upshifts the half-wave potential for the oxygen reduction reaction. Furthermore, when utilized as the cathode, the FeCo-NPC catalyst also displays excellent zinc-air battery performance. Experimental and theoretical results demonstrate that the introduction of single Co atoms with Co-N/P coordination around isolated Fe atoms induces asymmetric electron distribution, resulting in the suitable adsorption/desorption ability for oxygen intermediates and the optimized reaction barrier, thereby improving the electrocatalytic activity.

Bimetal-bridging Nitrogen Coordination in Carbon-based Electrocatalysts for pH-universal Oxygen Reduction

Electrocatalysts with atomically dispersed metal sites (e.g., metal-nitrogen-carbon) have been deemed as promising alternatives for noble-metal catalysts in couples of electrocatalytic reactions. However, the modulation of such atomic sites and the understanding of their interactions are still highly challenging. Herein, we propose a unique supermolecule assembly-profile coating strategy to prepare a series of diatomic electrocatalysts by profile coating of eight Prussian blue analogues (PBAs) on supramolecular supports respectively as bimetallic sources. The detailed microstructure analysis revealed that the metal-nitrogen-carbon sites with four- (Zn-N4 ) and five-coordination (Fe-N5 ) via the nitrogen coordination are similar to the cytochrome c oxidases. For promising electrocatalysis, such unique microstructure is able to activate oxygen molecules due to nitrogen-bonding coordination with bimetal sites, thus leading to efficient four-electron oxygen reduction in alkaline, neutral, and acid electrolytes. Especially, zinc group elements (e.g., Zn and Cd) with d10 electron configuration would significantly boost the nitrogen-bonding coordination with bimetal sites to enhance electrocatalytic activity. The proof-of-concept for the general synthesis of advanced electrocatalysts with controllable bimetal active sites and the mechanistic understanding will promote the promising electrocatalysis by applying the similar principles.

Engineering Symmetry-Breaking Centers and d-Orbital Modulation in Triatomic Catalysts for Zinc-Air Batteries

Unraveling the configuration-activity relationship and synergistic enhancement mechanism (such as real active center, electron spin-state, and d-orbital energy level) for triatomic catalysts, as well as their intrinsically bifunctional oxygen electrocatalysis, is a great challenge. Here we present a triatomic catalyst (TAC) with a trinuclear active structure that displays extraordinary oxygen electrocatalysis for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), greatly outperforming the counterpart of single-atom and diatomic catalysts. The aqueous Zn-air battery (ZAB) equipped with a TAC-based cathode exhibits extraordinary rechargeable stability and ultrarobust cycling performance (1970 h/3940 cycles at 2 mA cm-2, 125 h/250 cycles at 10 mA cm-2 with negligible voltage decay), and the quasi-solid-state ZAB displays outstanding rechargeability and low-temperature adaptability (300 h/1800 cycles at 2 mA cm-2 at -60 °C), outperforming other state-of-the-art ZABs. The experimental and theoretical analyses reveal the symmetry-breaking CoN4 configuration under incorporation of neighboring metal atoms (Fe and Cu), which leads to d-orbital modulation, a low-shift d band center, weakened binding strength to the oxygen intermediates, and decreased energy barrier for bifunctional oxygen electrocatalysis. This rational tricoordination design as well as an in-depth mechanism analysis indicate that hetero-TACs can be promisingly applied in various electrocatalysis applications.

Formulating N-Doped Carbon Hollow Nanospheres with Highly Accessible Through-Pores to Isolate Fe Single-Atoms for Efficient Oxygen Reduction

It is challenging yet promising to design highly accessible N-doped carbon skeletons to fully expose the active sites inside single-atom catalysts. Herein, mesoporous N-doped carbon hollow spheres with regulatable through-pore size can be formulated by a simple sequential synthesis procedure, in which the condensed SiO2 is acted as removable dual-templates to produce both hollow interiors and through-pores, meanwhile, the co-condensed polydopamine shell is served as N-doped carbon precursor. After that, Fe─N─C hollow spheres (HSs) with highly accessible active sites can be obtained after rationally implanting Fe single-atoms. Microstructural analysis and X-ray absorption fine structure analysis reveal that high-density Fe─N4 active sites together with tiny Fe clusters are uniformly distributed on the mesoporous carbon skeleton with abundant through-pores. Benefitted from the highly accessible Fe─N4 active sites arising from the unique through-pore architecture, the Fe─N─C HSs demonstrate excellent oxygen reduction reaction (ORR) performance in alkaline media with a half-wave potential up to 0.90 V versus RHE and remarkable stability, both exceeding the commercial Pt/C. When employing Fe─N─C HSs as the air-cathode catalysts, the assembled Zn-air batteries deliver a high peak power density of 204 mW cm-2 and stable discharging voltage plateau over 140 h.

Precise Design and Modification Engineering of Single-Atom Catalytic Materials for Oxygen Reduction

Due to their unique electronic and structural properties, single-atom catalytic materials (SACMs) hold great promise for the oxygen reduction reaction (ORR). Coordinating environmental and engineering strategies is the key to improving the ORR performance of SACMs. This review summarizes the latest research progress and breakthroughs of SACMs in the field of ORR catalysis. First, the research progress on the catalytic mechanism of SACMs acting on ORR is reviewed, including the latest research results on the origin of SACMs activity and the analysis of pre-adsorption mechanism. The study of the pre-adsorption mechanism is an important breakthrough direction to explore the origin of the high activity of SACMs and the practical and theoretical understanding of the catalytic process. Precise coordination environment modification, including in-plane, axial, and adjacent site modifications, can enhance the intrinsic catalytic activity of SACMs and promote the ORR process. Additionally, several engineering strategies are discussed, including multiple SACMs, high loading, and atomic site confinement. Multiple SACMs synergistically enhance catalytic activity and selectivity, while high loading can provide more active sites for catalytic reactions. Overall, this review provides important insights into the design of advanced catalysts for ORR.

Flash Nitrogen-Doped Carbon Nanotubes for Energy Storage and Conversion

In recent years, nitrogen-doped carbons show great application potentials in the fields of electrochemical energy storage and conversion. Here, the ultrafast and green preparation of nitrogen-doped carbon nanotubes (N-CNTs) via an efficient flash Joule heating method is reported. The precursor of 1D core-shell structure of CNT@polyaniline is first synthesized using an in situ polymerization method and then rapidly conversed into N-CNTs at ≈1300 K within 1 s. Electrochemical tests reveal the desirable capacitive property and oxygen catalytic activity of the optimized N-CNT material. It delivers an improved area capacitance of 101.7 mF cm-2 at 5 mV s-1 in 1 m KOH electrolyte, and the assembled symmetrical supercapacitor shows an energy density of 1.03 µWh cm-2 and excellent cycle stability over 10 000 cycles. In addition, the flash N-CNTs exhibit impressive catalytic performance toward oxygen reduction reaction with a half-wave potential of 0.8 V in alkaline medium, comparable to the sample prepared by the conventional long-time pyrolysis method. The Zn-air battery presents superior charge-discharge ability and long-term durability relative to commercial Pt/C catalyst. These remarkable electrochemical performances validate the superiorities of the Joule heating method in preparing the heteroatom-doped carbon materials for wide applications.

Nanoscale Metal Particle Modified Single-Atom Catalyst: Synthesis, Characterization, and Application

Single-atom catalysts (SACs) have attracted considerable attention in heterogeneous catalysis because of their well-defined active sites, maximum atomic utilization efficiency, and unique unsaturated coordinated structures. However, their effectiveness is limited to reactions requiring active sites containing multiple metal atoms. Furthermore, the loading amounts of single-atom sites must be restricted to prevent aggregation, which can adversely affect the catalytic performance despite the high activity of the individual atoms. The introduction of nanoscale metal particles (NMPs) into SACs (NMP-SACs) has proven to be an efficient approach for improving their catalytic performance. A comprehensive review is urgently needed to systematically introduce the synthesis, characterization, and application of NMP-SACs and the mechanisms behind their superior catalytic performance. This review first presents and classifies the different mechanisms through which NMPs enhance the performance of SACs. It then summarizes the currently reported synthetic strategies and state-of-the-art characterization techniques of NMP-SACs. Moreover, their application in electro/thermo/photocatalysis, and the reasons for their superior performance are discussed. Finally, the challenges and perspectives of NMP-SACs for the future design of advanced catalysts are addressed.

Single-Atom Catalysts for Selective Oxygen Reduction: Transition Metals in Uniform Carbon Nanospheres with High Loadings

Transition metal single-atom catalysts (SACs) in uniform carbon nanospheres have gained tremendous interest as electrocatalysts owing to their low cost, high activity, and excellent selectivity. However, their preparation typically involves complicated multistep processes that are not practical for industrial use. Herein, we report a facile one-pot method to produce atomically isolated metal atoms with high loadings in uniform carbon nanospheres without any templates or postsynthesis modifications. Specifically, we use a chemical confinement strategy to suppress the formation of metal nanoparticles by introducing ethylenediaminetetraacetic acid (EDTA) as a molecular barrier to spatially isolate the metal atoms and thus generate SACs. To demonstrate the versatility of this synthetic method, we produced SACs from multiple transition metals, including Fe, Co, Cu, and Ni, with loadings as high as 3.87 wt %. Among these catalytic materials, the Fe-based SACs showed remarkable catalytic activity toward the oxygen reduction reaction (ORR), achieving an onset and half-wave potential of 1.00 and 0.831 VRHE, respectively, comparable to that of commercial 20 wt % Pt/C. Significantly, we were able to steer the ORR selectivity toward either energy generation or hydrogen peroxide production by simply changing the transition metal in the EDTA-based precursor.

Developing a class of dual atom materials for multifunctional catalytic reactions

Dual atom catalysts, bridging single atom and metal/alloy nanoparticle catalysts, offer more opportunities to enhance the kinetics and multifunctional performance of oxygen reduction/evolution and hydrogen evolution reactions. However, the rational design of efficient multifunctional dual atom catalysts remains a blind area and is challenging. In this study, we achieved controllable regulation from Co nanoparticles to CoN4 single atoms to Co2N5 dual atoms using an atomization and sintering strategy via an N-stripping and thermal-migrating process. More importantly, this strategy could be extended to the fabrication of 22 distinct dual atom catalysts. In particular, the Co2N5 dual atom with tailored spin states could achieve ideally balanced adsorption/desorption of intermediates, thus realizing superior multifunctional activity. In addition, it endows Zn-air batteries with long-term stability for 800 h, allows water splitting to continuously operate for 1000 h, and can enable solar-powered water splitting systems with uninterrupted large-scale hydrogen production throughout day and night. This universal and scalable strategy provides opportunities for the controlled design of efficient multifunctional dual atom catalysts in energy conversion technologies.

Adapting Synthetic Models of Heme/Cu Sites to Energy-Efficient Electrocatalytic Oxygen Reduction Reaction

In nature, cytochrome c oxidases catalyze the 4e- oxygen reduction reaction (ORR) at the heme/Cu site, in which CuI is used to assist O2 activation. Because of the thermodynamic barrier to generate CuI , synthetic Fe-porphyrin/Cu complexes usually show moderate electrocatalytic ORR activity. We herein report on a Co-corrole/Co complex 1-Co for energy-efficient electrocatalytic ORR. By hanging a CoII ion over Co corrole, 1-Co realizes electrocatalytic 4e- ORR with a half-wave potential of 0.89 V versus RHE, which is outstanding among corrole-based electrocatalysts. Notably, 1-Co outperforms Co corrole hanged with CuII or ZnII . We revealed that the hanging CoII ion can provide an electron to improve O2 binding thermodynamically and dynamically, a function represented by the biological CuI ion of the heme/Cu site. This work is significant to present a remarkable ORR electrocatalyst and to show the vital role of a second-sphere redox-active metal ion in promoting O2 binding and activation.

Enhancing the bifunctional oxygen reduction and evolution activity of CoNC by introducing a trace amount of Fe

The potential application of zinc air batteries to tackle the energy shortage and environmental crisis has proposed new requirements of bifunctional catalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). Utilizing the special spatial structure of zeolitic imidazolate framework-67 (ZIF-67) as an ideal research platform, the effect of a trace amount of Fe on the composition and structure of as-obtained Fe-CoNC catalysts was investigated. It was revealed that, due to the increased exposed pore structure and metal species located at the near surface, the active sites for the ORR/OER on Fe-CoNC are highly exposed, greatly boosting the activity to the reduction and evolution of oxygen in alkaline media. ZABs with Fe-CoNC have the highest maximum power density of 200 mW cm-2 when operated at current densities as high as 328 mA cm-2, better than not only Fe-free CoNC, but also precious metal-based references with the same catalyst loading.

Machine Learning Study on Microwave-Assisted Batch Preparation and Oxygen Reduction Performance of Fe-N-C Catalysts

The Fe-N-C catalyst represents one of the most promising candidates for replacing platinum-based catalysts toward the oxygen reduction reaction. The pivotal factor in the successful integration of Fe-N-C catalysts within applications is the attainment of a large-scale production capability. Microwave-assisted pyrolysis offers various advantages, including enhanced energy and time efficiency, uniform heating, and high yield in single-batch processes. These characteristics render it exceptionally suitable for the mass production of catalysts. Through a synergistic approach involving machine learning techniques and microscopic characterization, we discerned performance trends and underlying mechanisms within batch-synthesized Fe-N-C catalysts under microwave-assisted preparation conditions. Machine learning analysis revealed that the precursor mass exerts the most substantial influence on product performance. Furthermore, microscopic characterization unveiled that these influencing factors impact catalyst performance by modulating the degree of agglomeration. Our research introduces an efficacious machine learning model for prognosticating performance and dissecting the influencing factors pertinent to Fe-N-C catalyst synthesis within a microwave system.

Atomically Dispersed FeN2 P2 Motif with High Activity and Stability for Oxygen Reduction Reaction Over the Entire pH Range

The past decade has witnessed the great potential of Fe-based single-atom electrocatalysis in catalyzing oxygen reduction reaction (ORR). However, it remains a grand challenge to substantially improve their intrinsic activity and long-term stability in acidic electrolytes. Herein, we report a facile chemical vapor deposition strategy, by which high-density Fe atoms (3.97 wt%) are coordinated with square-planar para-positioned nitrogen and phosphorus atoms in a hierarchical carbon framework. The as-crafted atomically dispersed Fe catalyst (denoted Fe-SA/PNC) manifests an outstanding activity towards ORR over the entire pH range. Specifically, the half-wave potential of 0.92 V, 0.83 V, and 0.86 V vs. reversible hydrogen electrode (RHE) are attained in alkaline, neutral, and acidic electrolytes, respectively, representing the high performance among reported catalysts to date. Furthermore, after 30,000 durability cycles, the Fe-SA/PNC remains to be stable with no visible performance decay when tested in 0.1 M KOH and 0.5 M H2 SO4 , and only a minor negative shift of 40 mV detected in 0.1 M HClO4 , significantly outperforming commercial Pt/C counterpart. The coordination motif of Fe-SA/PNC is validated by density functional theory (DFT) calculations. This work provides atomic-level insight into improving the activity and stability of non-noble metal ORR catalysts, opening up an avenue to craft the desired single-atom electrocatalysts.

Dual-Active-Sites Single-Atom Catalysts for Advanced Applications

Dual-Active-Sites Single-Atom catalysts (DASs SACs) are not only the improvement of SACs but also the expansion of dual-atom catalysts. The DASs SACs contains dual active sites, one of which is a single atomic active site, and the other active site can be a single atom or other type of active site, endowing DASs SACs with excellent catalytic performance and a wide range of applications. The DASs SACs are categorized into seven types, including the neighboring mono metallic DASs SACs, bonded DASs SACs, non-bonded DASs SACs, bridged DASs SACs, asymmetric DASs SACs, metal and nonmetal combined DASs SACs and space separated DASs SACs. Based on the above classification, the general methods for the preparation of DASs SACs are comprehensively described, especially their structural characteristics are discussed in detail. Meanwhile, the in-depth assessments of DASs SACs for variety applications including electrocatalysis, thermocatalysis and photocatalysis are provided, as well as their unique catalytic mechanism are addressed. Moreover, the prospects and challenges for DASs SACs and related applications are highlighted. The authors believe the great expectations for DASs SACs, and this review will provide novel conceptual and methodological perspectives and exciting opportunities for further development and application of DASs SACs.

Modulating Electronic Structures of Iron Clusters through Orbital Rehybridization by Adjacent Single Copper Sites for Efficient Oxygen Reduction

The atom-cluster interaction has recently been exploited as an effective way to increase the performance of metal-nitrogen-carbon catalysts for oxygen reduction reaction (ORR). However, the rational design of such catalysts and understanding their structure-property correlations remain a great challenge. Herein, we demonstrate that the introduction of adjacent metal (M)-N4 single atoms (SAs) could significantly improve the ORR performance of a well-screened Fe atomic cluster (AC) catalyst by combining density functional theory (DFT) calculations and experimental analysis. The DFT studies suggest that the Cu-N4 SAs act as a modulator to assist the O2 adsorption and cleavage of O-O bond on the Fe AC active center, as well as optimize the release of OH* intermediates to accelerate the whole ORR kinetic. The depositing of Fe AC with Cu-N4 SAs on nitrogen doped mesoporous carbon nanosheet are then constructed through a universal interfacial monomicelles assembly strategy. Consistent with theoretical predictions, the resultant catalyst exhibits an outstanding ORR performance with a half-wave potential of 0.92 eV in alkali and 0.80 eV in acid, as well as a high power density of 214.8 mW cm-2 in zinc air battery. This work provides a novel strategy for precisely tuning the atomically dispersed poly-metallic centers for electrocatalysis.

Constructing Fe-N4 Sites through Anion Exchange-mediated Transformation of Fe Coordination Environments in Hierarchical Carbon Support for Efficient Oxygen Reduction

Metal single atoms (SAs) anchored in carbon support via coordinating with N atoms are efficient active sites to oxygen reduction reaction (ORR). However, rational design of single atom catalysts with highly exposed active sites is challenging and urgently desirable. Herein, an anion exchange strategy is presented to fabricate Fe-N4 moieties anchored in hierarchical carbon nanoplates composed of hollow carbon spheres (Fe-SA/N-HCS). With the coordinating O atoms are substituted by N atoms, Fe SAs with Fe-O4 configuration are transformed into the ones with Fe-N4 configuration during the thermal activation process. Insights into the evolution of central atoms demonstrate that the SAs with specific coordination environment can be obtained by modulating in situ anion exchange process. The strategy produces a large quantity of electrochemical accessible site and high utilization rate of Fe-N4 . Fe-SA/N-HCS shows excellent ORR electrocatalytic performance with half-wave potential of 0.91 V (vs. RHE) in 0.1 M KOH, and outstanding performance when used in rechargeable aqueous and flexible Zn-air batteries. The evolution pathway for SAs demonstrated in this work offers a novel strategy to design SACs with various coordination environment and enhanced electrocatalytic activity.

Bifunctional Single Atom Catalysts for Rechargeable Zinc-Air Batteries: From Dynamic Mechanism to Rational Design

Ever-growing demands for rechargeable zinc-air batteries (ZABs) call for efficient bifunctional electrocatalysts. Among various electrocatalysts, single atom catalysts (SACs) have received increasing attention due to the merits of high atom utilization, structural tunability, and remarkable activity. Rational design of bifunctional SACs relies heavily on an in-depth understanding of reaction mechanisms, especially dynamic evolution under electrochemical conditions. This requires a systematic study in dynamic mechanisms to replace current trial and error modes. Herein, fundamental understanding of dynamic oxygen reduction reaction and oxygen evolution reaction mechanisms for SACs is first presented combining in situ and/or operando characterizations and theoretical calculations. By highlighting structure-performance relationships, rational regulation strategies are particularly proposed to facilitate the design of efficient bifunctional SACs. Furthermore, future perspectives and challenges are discussed. This review provides a thorough understanding of dynamic mechanisms and regulation strategies for bifunctional SACs, which are expected to pave the avenue for exploring optimum single atom bifunctional oxygen catalysts and effective ZABs.

Probing the Activity Enhancement of Carbocatalyst with the Anchoring of Atomic Metal

Enhanced catalysis for organic transformation is essential for the synthesis of high-value compounds. Atomic metal species recently emerged as highly effective catalysts for organic reactions with high activity and metal utilization. However, developing efficient atomic catalysts is always an attractive and challenging topic in the modern chemical industry. In this work, we report the preparation and activity enhancement of nitrogen- and sulfur-codoped holey graphene (NSHG) with the anchoring of atomic metal Pd. When employed as the catalyst for nitroarenes reduction reactions, the resultant Pd/NSHG composite exhibits remarkably high catalytic activity due to the co-existence of dual-active components (i.e., catalytically active NSHG support and homogeneous dispersion of atomic metal Pd). In the catalytic 4-nitrophenol (4-NP) reduction reaction, the efficiency (turnover frequency) is 3.99 × 10-2 mmol 4-NP/(mg cat.·min), which is better than that of metal-free nitrogen-doped holey graphene (NHG) (2.3 × 10-3 mmol 4-NP/(mg cat.·min)) and NSHG carbocatalyst (3.8 × 10-3 mmol 4-NP/(mg cat.·min)), the conventional Pd/C and other reported metal-based catalysts. This work provides a rational design strategy for the atomic metal catalysts loaded on active doped graphene support. The resultant Pd/NSHG dual-active component catalyst (DACC) is also anticipated to bring great application potentials for a broad range of organic fields, such as organic synthesis, environment treatment, energy storage and conversion.

Combining Fe nanoparticles and pyrrole-type Fe-N4 sites on less-oxygenated carbon supports for electrochemical CO2 reduction

A great challenge for electrochemical CO2 reduction is to improve energy efficiency, which requires reducing overpotential while increasing product Faraday efficiency. Here, we designedly synthesize a hybrid electrocatalyst consisting of Fe nanoparticles, pyrrole-type Fe-N4 sites and less-oxygenated carbon supports, which exhibits a remarkable CO Faraday efficiency above 99% at an ultralow overpotential of 21 mV, reaching the highest cathode energy efficiency of 97.1% to date. The catalyst also can afford a CO selectivity nearly 100% with a high cathode energy efficiency (>90%) at least 100 h. The combined results of control experiments, in situ characterizations and theoretical calculations demonstrate that introducing Fe nanoparticles can reduce the overpotential by accelerating the proton transfer from CO2 to *COOH and lowering the free energy for *COOH formation, constructing pyrrole-type Fe-N4 sites and limiting oxygen species on carbon supports can increase CO Faraday efficiency through inhibiting the H2 evolution, thus achieving energy-efficient electrochemical CO2 reduction to CO.

A facile synthesis of FeS/Fe3C nanoparticles highly dispersed on in situ grown N-doped CNTs as cathode electrocatalysts for microbial fuel cells

A novel composite of iron sulfide, iron carbide and nitrogen carbides (Nano-FeS/Fe3C@NCNTs) as a cathode electrocatalyst for microbial fuel cells (MFCs) is synthesized by a one-pot solid state reaction, which yields a unique configuration of FeS/Fe3C nanoparticles highly dispersed on in situ grown nitrogen-doped carbon nanotubes (NCNTs). The highly dispersed FeS/Fe3C nanoparticles possess large active sites, while the NCNTs provide an electronically conductive network. Consequently, the resultant Nano-FeS/Fe3C@NCNTs exhibit excellent electrocatalytic activity towards the oxygen reduction reaction (ORR), with a half-wave potential close to that of Pt/C (about 0.88 V vs. RHE), and enable MFCs to deliver a power density of 1.28 W m-2 after two weeks' operation, which is higher than that of MFCs with Pt/C as the cathode electrocatalyst (1.02 W m-2). Theoretical calculations and experimental data demonstrate that there is a synergistic effect between Fe3C and FeS in Nano-FeS/Fe3C@NCNTs. Fe3C presents a strong attraction and electron-donating tendency to oxygen molecules, serving as the main active component, while FeS reduces charge transfer resistance by transferring electrons to Fe3C, synergistically improving the kinetics of the ORR and power density of MFCs.

Modulating adsorbed hydrogen drives electrochemical CO2-to-C2 products

Electrocatalytic CO₂ reduction is a typical reaction involving two reactants (CO₂ and H₂O). However, the role of H₂O dissociation, which provides active *H species to multiple protonation steps, is usually overlooked. Herein, we construct a dual-active sites catalyst comprising atomic Cu sites and Cu nanoparticles supported on N-doped carbon matrix. Efficient electrosynthesis of multi-carbon products is achieved with Faradaic efficiency approaching 75.4% with a partial current density of 289.2 mA cm^-2 at -0.6 V. Experimental and theoretical studies reveal that Cu nanoparticles facilitate the C-C coupling step through *CHO dimerization, while the atomic Cu sites boost H₂O dissociation to form *H. The generated *H migrate to Cu nanoparticles and modulate the *H coverage on Cu NPs, and thus promote *CO-to-*CHO. The dual-active sites effect of Cu single-sites and Cu nanoparticles gives rise to the catalytic performance.

Programmable kernel structures of atomically precise metal nanoclusters for tailoring catalytic properties

The unclear structures and polydispersity of metal nanoparticles (NPs) seriously hamper the identification of the active sites and the construction of structure-reactivity relationships. Fortunately, ligand-protected metal nanoclusters (NCs) with atomically precise structures and monodispersity have become an ideal candidate for understanding the well-defined correlations between structure and catalytic property at an atomic level. The programmable kernel structures of atomically precise metal NCs provide a fantastic chance to modulate their size, shape, atomic arrangement, and electron state by the precise modulating of the number, type, and location of metal atoms. Thus, the special focus of this review highlights the most recent process in tailoring the catalytic activity and selectivity over metal NCs by precisely controlling their kernel structures. This review is expected to shed light on the in-depth understanding of metal NCs' kernel structures and reactivity relationships.

Nitrogen-doped porous carbon encapsulates multivalent cobalt-nickel as oxygen reduction reaction catalyst for zinc-air battery

In this study, we present a bimetallic ion coexistence encapsulation strategy employing hexadecyl trimethyl ammonium bromide (CTAB) as a mediator to anchor cobalt-nickel (CoNi) bimetals in nitrogen-doped porous carbon cubic nanoboxes (CoNi@NC). The fully encapsulated and uniformly dispersed CoNi nanoparticles with the improved density of active sites help to accelerate the oxygen reduction reaction (ORR) kinetics and provide an efficient charge/mass transport environment. Zinc-air battery (ZAB) equipped CoNi@NC as cathode exhibits an open-circuit voltage of 1.45 V, a specific capacity of 870.0 mAh g^-1, and a power density of 168.8 mW cm^-2. Moreover, the two CoNi@NC-based ZABs in series display a stable discharge specific capacity of 783.0 mAh g^-1, as well as a large peak power density of 387.9 mW cm^-2. This work provides an effective way to tune the dispersion of nanoparticles to boost active sites in nitrogen-doped carbon structure, and enhance the ORR activity of bimetallic catalysts.

Highly efficient peroxymonosulfate activation on Fe-N-C catalyst via the collaboration of low-coordinated Fe-N structure and Fe nanoparticles for enhanced organic pollutant degradation

Supporting Fe catalysts on N doped carbon (Fe-N-C) renders a promising way towards peroxymonosulfate (PMS) activation for water decontamination, but constructing high-efficiency Fe-N-C remains challenging due to the insufficient understanding of the structure-performance relationship. Herein, the N doped carbon nanotube supported Fe catalysts (Fe-NCNT) were prepared towards PMS activation for organic pollutants removal, in which the Fe-N coordination number and Fe species were tuned through changing the pyrolysis temperature to study their roles in PMS activation. Results showed increasing the pyrolysis temperature converted the Fe-N₄ structure in Fe-NCNT to low-coordinated Fe-N₃ structure and produced Fe nanoparticles (FeNP, encapsulated in carbon). The Fe-NCNT with Fe-N₃ and FeNP exhibited a remarkably high specific activity (0.119 L min^-1 m^-2), which was 1.8 times higher than that of Fe-NCNT with only Fe-N₄ and obviously outperformed those of the state-of-the-art PMS activators. The low-coordinated structure and FeNP promoted the PMS reduction on Fe²⁺ of Fe-N_x for •OH and SO₄^•- production, which served as major oxidants for pollutants degradation. The experimental results and theoretical calculation corroborated the low-coordinated structure and FeNP jointly enhanced the PMS adsorption and electron density on Fe center, which accelerated electron transfer from Fe center to PMS for radical production.

Single atom iron implanted polydopamine-modified hollow leaf-like N-doped carbon catalyst for improving oxygen reduction reaction and zinc-air batteries

Metal-nitrogen-carbon (MNC) catalysts, especially FeNC catalysts, are considered promising candidates to replace Pt-based catalysts, but FeNC catalysts still present certain challenges in controlled-synthesis and energy device applications. In this paper, through the modification strategy of poly-dopamine (PDA) to maintain 2D leaf morphology to obtain more active sites and further adjust the N content, N-doped porous carbon monatomic iron catalyst (Fe_SA/NPCs) with rich-nitrogen content was prepared. XPS analysis showed that compared with C-ZIF-Fe, the contents of graphite nitrogen and pyridine nitrogen increased in Fe_SA/NPCs. The hollow structure with defects and Fe-N₄ configuration of Fe single atom show more active sites for the catalyst, and positively promote the diffusion of reactants, oxygen exchange and electron transport, thus changing the reaction kinetics and promoting the improvement of ORR activity. Fe_SA/NPCs electrocatalyst exhibits good half-wave potential and onset potential at low loading (E_1/2 = 0.93 V, E_onset = 1.0 V). In addition, the methanol tolerance, stability and Tafel slope are better than those of commercial Pt/C. Excitingly, the zinc-air cell with Fe_SA/NPCs as cathode material achieves a power density of 223 mW cm^-2 and exhibits a long-term stability higher than 200 h. This work shows that nitrogen-doped porous carbon materials as well as iron monoatoms play important roles in improving electrocatalytic performance.

Oxyanion Engineering Suppressed Iron Segregation in Nickel-Iron Catalysts Toward Stable Water Oxidation

Nickel-iron catalysts represent an appealing platform for electrocatalytic oxygen evolution reaction (OER) in alkaline media because of their high adjustability in components and activity. However, their long-term stabilities under high current density still remain unsatisfactory due to undesirable Fe segregation. Herein, a nitrate ion (NO₃ ^- ) tailored strategy is developed to mitigate Fe segregation, and thereby improve the OER stability of nickel-iron catalyst. X-ray absorption spectroscopy combined with theoretical calculations indicate that introducing Ni₃ (NO₃ )₂ (OH)₄ with stable NO₃ ^- in the lattice is conducive to constructing the stable interface of FeOOH/Ni₃ (NO₃ )₂ (OH)₄ via the strong interaction between Fe and incorporated NO₃ ^- . Time of flight secondary ion mass spectrometry and wavelet transformation analysis demonstrate that the NO₃ ^- tailored nickel-iron catalyst greatly alleviates Fe segregation, exhibiting a considerably enhanced long-term stability with a six-fold improvement over FeOOH/Ni(OH)₂ without NO₃ ^- modification. This work represents a momentous step toward regulating Fe segregation for stabilizing the catalytic performances of nickel-iron catalysts.

Cooperation between Dual Metal Atoms and Nanoclusters Enhances Activity and Stability for Oxygen Reduction and Evolution

We have achieved the synthesis of dual-metal single atoms and atomic clusters that co-anchor on a highly graphitic carbon support. The catalyst comprises Ni₄ (and Fe₄) nanoclusters located adjacent to the corresponding NiN₄ (and FeN₄) single-atom sites, which is verified by systematic X-ray absorption characterization and density functional theory calculations. A distinct cooperation between Fe₄ (Ni₄) nanoclusters and the corresponding FeN₄ (NiN₄) atomic sites optimizes the adsorption energy of reaction intermediates and reduces the energy barrier of the potential-determining steps. This catalyst exhibits enhanced oxygen reduction and evolution activity and long-cycle stability compared to counterparts without nanoclusters and commercial Pt/C. The fabricated Zn-air batteries deliver a high power density and long-term cyclability, demonstrating their prospects in energy storage device applications.

The optimized Fenton-like activity of Fe single-atom sites by Fe atomic clusters-mediated electronic configuration modulation

The performance optimization of isolated atomically dispersed metal active sites is critical but challenging. Here, TiO2@Fe species-N-C catalysts with Fe atomic clusters (ACs) and satellite Fe-N4 active sites were fabricated to initiate peroxymonosulfate (PMS) oxidation reaction. The AC-induced charge redistribution of single atoms (SAs) was verified, thus strengthening the interaction between SAs and PMS. In detail, the incorporation of ACs optimized the HSO5- oxidation and SO5·- desorption steps, accelerating the reaction progress. As a result, the Vis/TiFeAS/PMS system rapidly eliminated 90.81% of 45 mg/L tetracycline (TC) in 10 min. The reaction process characterization suggested that PMS as an electron donor would transfer electron to Fe species in TiFeAS, generating 1O2. Subsequently, the hVB+ can induce the generation of electron-deficient Fe species, promoting the reaction circulation. This work provides a strategy to construct catalysts with multiple atom assembly-enabled composite active sites for high-efficiency PMS-based advanced oxidation processes (AOPs).

Atomically Dispersed Fe-N4 Sites and NiFe-LDH Sub-Nanoclusters as an Excellent Air Cathode for Rechargeable Zinc-Air Batteries

The sluggish four-electron processes of the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) limit the development of rechargeable Zn-air batteries (RZABs). Highly efficient ORR/OER bifunctional electrocatalysts are therefore highly desired for the commercialization of RZABs in large scale. Herein, the Fe-N₄-C (ORR active sites) and NiFe-LDH clusters (OER active sites) are successfully integrated within a NiFe-LDH/Fe,N-CB electrocatalyst. The NiFe-LDH/Fe,N-CB electrocatalyst is first prepared by the introduction of Fe-N₄ into carbon black (CB), followed by the growth of NiFe-LDH clusters. The cluster nature of NiFe-LDH effectively avoids the blocking of Fe-N₄-C ORR active centers and affords excellent OER activity. The NiFe-LDH/Fe,N-CB electrocatalyst thus exhibits an excellent bifunctional ORR and OER performance, with a potential gap of only 0.71 V. The NiFe-LDH/Fe,N-CB-based RZAB exhibits an open-circuit voltage of 1.565 V and a specific capacity of 731 mAh g_Zn^-1, which is much better than the RZAB composed of Pt/C and IrO₂. Particularly, the NiFe-LDH/Fe,N-CB-based RZAB displays excellent long-term charging/discharging cyclic stability and rechargeability. Even at a large charging/discharging current density (20 mA cm^-2), the charging/discharging voltage gap is only ∼1.33 V and exhibits an increase smaller than 5% after 140 cycles. This work provides a new low-cost bifunctional ORR/OER electrocatalyst with high activity and superior long-term stability and will be helpful to the commercialization of RZAB in large scale.

Mutual Self-Regulation of d-Electrons of Single Atoms and Adjacent Nanoparticles for Bifunctional Oxygen Electrocatalysis and Rechargeable Zinc-Air Batteries

Rechargeable zinc-air batteries (ZABs) are a promising energy conversion device, which rely critically on electrocatalysts to accelerate their rate-determining reactions such as oxygen reduction (ORR) and oxygen evolution reactions (OER). Herein, we fabricate a range of bifunctional M-N-C (metal-nitrogen-carbon) catalysts containing M-Nx coordination sites and M/MxC nanoparticles (M = Co, Fe, and Cu) using a new class of γ-cyclodextrin (CD) based metal-organic framework as the precursor. With the two types of active sites interacting with each other in the catalysts, the obtained Fe@C-FeNC and Co@C-CoNC display superior alkaline ORR activity in terms of low half-wave (E1/2) potential (~ 0.917 and 0.906 V, respectively), which are higher than Cu@C-CuNC (~ 0.829 V) and the commercial Pt/C (~ 0.861 V). As a bifunctional electrocatalyst, the Co@C-CoNC exhibits the best performance, showing a bifunctional ORR/OER overpotential (ΔE) of ~ 0.732 V, which is much lower than that of Fe@C-FeNC (~ 0.831 V) and Cu@C-CuNC (~ 1.411 V), as well as most of the robust bifunctional electrocatalysts reported to date. Synchrotron X-ray absorption spectroscopy and density functional theory simulations reveal that the strong electronic correlation between metallic Co nanoparticles and the atomic Co-N4 sites in the Co@C-CoNC catalyst can increase the d-electron density near the Fermi level and thus effectively optimize the adsorption/desorption of intermediates in ORR/OER, resulting in an enhanced bifunctional electrocatalytic performance. The Co@C-CoNC-based rechargeable ZAB exhibited a maximum power density of 162.80 mW cm-2 at 270.30 mA cm-2, higher than the combination of commercial Pt/C + RuO2 (~ 158.90 mW cm-2 at 265.80 mA cm-2) catalysts. During the galvanostatic discharge at 10 mA cm-2, the ZAB delivered an almost stable discharge voltage of 1.2 V for ~ 140 h, signifying the virtue of excellent bifunctional ORR/OER electrocatalytic activity.

Atomic-Level Interface Engineering for Boosting Oxygen Electrocatalysis Performance of Single-Atom Catalysts: From Metal Active Center to the First Coordination Sphere

Oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are the core reactions of a series of advanced modern energy and conversion technologies, such as fuel cells and metal-air cells. Among all kinds of oxygen electrocatalysts that have been reported, single-atom catalysts (SACs) offer great development potential because of their nearly 100% atomic utilization, unsaturated coordination environment, and tunable electronic structure. In recent years, numerous SACs with enriched active centers and asymmetric coordination have been successfully constructed by regulating their coordination environment and electronic structure, which has brought the development of atomic catalysts to a new level. This paper reviews the improvement of SACs brought by atom-level interface engineering. It starts with the introduction of advanced techniques for the characterizations of SACs. Subsequently, different design strategies that are applied to adjust the metal active center and first coordination sphere of SACs and then enhance their oxygen electrocatalysis performance are systematically illustrated. Finally, the future development of SACs toward ORR and OER is discussed and prospected.

Highly exposed surface pore-edge FeNx sites for enhanced oxygen reduction performance in Zn-air batteries

Atomically dispersed pore-edge FeNx sites anchored on porous carbon exhibit excellent activity and stability towards ORR. The assembled Zn-air battery presents a high peak power density (150 mW cm−2) and long-cycle stability (450 h).

Recent Developments of Microscopic Study for Lanthanide and Manganese Doped Luminescent Materials

Luminescent materials are indispensable for applications in lighting, displays and photovoltaics, which can transfer, absorb, store and utilize light energy. Their performance is closely related with their size and morphologies, exact atomic arrangement, and local configuration about photofunctional centers. Advanced electron microscopy-based techniques have enabled the possibility to study nanostructures with atomic resolution. Especially, with the advanced micro-electro-mechanical systems, it is able to characterize the luminescent materials at the atomic scale under various environments, providing a deep understanding of the luminescent mechanism. Accordingly, this review summarizes the recent achievements of microscopic study to directly image the microstructure and local environment of activators in lanthanide and manganese (Ln/Mn²⁺ )-doped luminescent materials, including: 1) bulk materials, the typical systems are nitride/oxynitride phosphors; and 2) nanomaterials, such as nanocrystals (hexagonal-phase NaLnF₄ and perovskite) and 2D nanosheets (Ca₂ Ta₃ O₁₀ and MoS₂ ). Finally, the challenges and limitations are highlighted, and some possible solutions to facilitate the developments of advanced luminescent materials are provided.

Pinpointing the axial ligand effect on platinum single-atom-catalyst towards efficient alkaline hydrogen evolution reaction

Developing active single-atom-catalyst (SAC) for alkaline hydrogen evolution reaction (HER) is a promising solution to lower the green hydrogen cost. However, the correlations are not clear between the chemical environments around the active-sites and their desired catalytic activity. Here we study a group of SACs prepared by anchoring platinum atoms on NiFe-layered-double-hydroxide. While maintaining the homogeneity of the Pt-SACs, various axial ligands (−F, −Cl, −Br, −I, −OH) are employed via a facile irradiation-impregnation procedure, enabling us to discover definite chemical-environments/performance correlations. Owing to its high first-electron-affinity, chloride chelated Pt-SAC exhibits optimized bindings with hydrogen and hydroxide, which favor the sluggish water dissociation and further promote the alkaline HER. Specifically, it shows high mass-activity of 30.6 A mgPt⁻¹ and turnover frequency of 30.3  H₂ s⁻¹ at 100 mV overpotential, which are significantly higher than those of the state-of-the-art Pt-SACs and commercial Pt/C catalyst. Moreover, high energy efficiency of 80% is obtained for the alkaline water electrolyser assembled using the above catalyst under practical-relevant conditions.

Establishing robust structure/performance correlations is critical for the development of single-atom-catalysts with improved activity. Here, the axial ligand on Pt single-atom-catalyst is precisely adjusted and studied, showing that the ligand’s first electron affinity is crucial for the catalysis.

Emerging single-atom iron catalysts for advanced catalytic systems

Due to the elusive structure-function relationship, traditional nanocatalysts always yield limited catalytic activity and selectivity, making them practically difficult to replace natural enzymes in wide industrial and biomedical applications. Accordingly, single-atom catalysts (SACs), defined as catalysts containing atomically dispersed active sites on a support material, strikingly show the highest atomic utilization and drastically boosted catalytic performances to functionally mimic or even outperform natural enzymes. The molecular characteristics of SACs (e.g., unique metal-support interactions and precisely located metal sites), especially single-atom iron catalysts (Fe-SACs) that have a similar catalytic structure to the catalytically active center of metalloprotease, enable the accurate identification of active centers in catalytic reactions, which afford ample opportunity for unraveling the structure-function relationship of Fe-SACs. In this review, we present an overview of the recent advances of support materials for anchoring an atomic dispersion of Fe. Subsequently, we highlight the structural designability of support materials as two sides of the same coin. Moreover, the applications described herein illustrate the utility of Fe-SACs in a broad scope of industrially and biologically important reactions. Finally, we present an outlook of the major challenges and opportunities remaining for the successful combination of single Fe atoms and catalysts.

Anchoring Bimetal Single Atoms and Alloys on N-Doping-Carbon Nanofiber Networks for an Efficient Oxygen Reduction Reaction and Zinc-Air Batteries

Electrocatalysts for the oxygen reduction reaction (ORR) play a central role in fuel cells and zinc-air batteries. Bimetal single atoms and nanoparticle hybrids are emerging ORR electrocatalysts, superior to the most exploited unary metal single-atom catalysts (SACs). Here, we report bimetal SAC-based nanofiber networks of Co₃Fe₇@Co/Fe-SAC for efficient ORR electrocatalysis and zinc-air batteries. A facile and easy-to-scale-up process is developed, and the versatility is validated in three hybrids. Strong electronic interaction is revealed between bimetal single atoms and alloy nanoparticles, leading to improved catalytic performances for ORR. Specifically, the Co₃Fe₇@Co/Fe-SAC hybrids exhibit a half-wave potential of 0.841 V in a basic electrolyte, comparable to the Pt/C electrocatalyst. Assembled in a zinc-air battery, a Co₃Fe₇@Co/Fe-SAC hybrid-based cell demonstrates a power density 1.8 times higher than the benchmark Pt/C-IrO₂-based one, and it is stable for 150 cycles galvanostatic charge/discharge. The superior device performance is attributed to the appealing intrinsic activity, the carbon shielding effect for anti-leaching, and the hierarchical porous networks for large accessibility of active sites and favorable mass transport. Theoretical calculations suggest that alloy nanoparticles significantly improved the intrinsic catalytic activity of Fe single-atom sites at the expense of slightly lowering the activity of Co single-atom sites. This work presents a versatile process for the mass production of efficient composite electrocatalysts and highlights the power of bimetal single-atom-based hybrids and hierarchically porous structures for ORR device performances.