Prussian Blue Analogues for Sodium-Ion Batteries: Past, Present, and Future

Air stable and fast-charging cathode material for all climate sodium-ion batteries

The off-stoichiometric compound Na3.12Fe2.44(P2O7)2 (NFPO) is a highly promising, cost-effective, and structurally robust cathode material for sodium-ion batteries (SIBs). However, the slowing Na-ion migration kinetics and poor interface stability have seriously limited its rate capability and air stability. In this work, we successfully synthesis a sodium titanium pyrophosphate (NaTiP2O7 donated as NTPO) coating NFPO (denoted as NFPO-NTPO) cathode material via a liquid phase coating method for SIBs. After optimizing NTPO content, at 0.1C, NFPO-NTPO-4 % cathode achieves a reversible specific capacity of 108.4 mAh g-1. Remarkably, it maintains 88.39 % capacity at 10C comparing to 0.1C and stabilizes over 3000 cycles with 92.66 % retention rate. Moreover, it retains 88.89 % capacity after 5000 cycles at 20C, even after 28 days of air exposure. The NFPO-Ti cathode, alongside the complete battery system, exhibits remarkable electrochemical performance across a broad temperature range spanning from -40 to 60 ℃.

An improved N-N dimethylacetamide-based non-flammable molecular crowding electrolyte using NaOTf for cobalt-based prussian blue//hard carbon aqueous solution battery

Aqueous sodium-ion batteries (ASIBs) are promising for large-scale electrical energy storage (LSEES) applications due to their cost and safety advantages. However, the low voltage stabilization window of water (∼1.23 V) and the lack of cathode with high specific capacity and long cycle life have limited their development. Cobalt-based Prussian blue analogues (NaCoPBAs) have the advantage of high theoretical specific capacity but short cycle life. Recently, the molecular crowding electrolyte (MCE) strategy has been proposed to improve the electrolyte voltage stability window (ESW) of electrolytes, in this work, we report an improved xMC (x: ratio, MC: molecular crowding agent) electrolyte that uses N-N dimethylacetamide (DMAC) as the molecular crowding agent and NaOTf as the advanced salt with an ESW of 2.65 V and excellent nonflammability. The side reactions of the NaCoPBA//Hard Carbon (HC) full-cell active material are improved with the aid of the electrolyte. Capacity retention of 75 % after 600 cycles with excellent cycling stability. These results demonstrate that this advanced MCE strategy can be utilized for practical applications designed for safety, high specific capacity and long cycle (ASIB).

Ambient Synthesis of Vanadium-Based Prussian Blue Analogues Nanocubes for High-Performance and Durable Aqueous Zinc-Ion Batteries with Eutectic Electrolytes

Prussian blue analogues (PBAs) have been widely studied in aqueous zinc-ion batteries (AZIBs) due to the characteristics of large specific surface area, open aperture, and straightforward synthesis. In this work, vanadium-based PBA nanocubes were firstly prepared using a mild in situ conversion strategy at room temperature without the protection of noble gas. Benefiting from the multiple-redox active sites of V3+/V4+, V4+/V5+, and Fe2+/Fe3+, the cathode exhibited an excellent discharge specific capacity of 200 mAh g-1 in AZIBs, which is much higher than those of other metal-based PBAs nanocubes. To further improve the long-term cycling stability of the V-PBA cathode, a high concentration water-in-salt electrolyte (4.5 M ZnSO4+3 M Zn(OTf)2), and a water-based eutectic electrolyte (5.55 M glucose+3 M Zn(OTf)2) were designed to successfully inhibit the dissolution of vanadium and improve the deposition of Zn2+ onto the zinc anode. More importantly, the assembled AZIBs maintained 55 % of their highest discharge specific capacity even after 10000 cycles at 10 A g-1 with superior rate capability. This study provides a new strategy for the preparation of pure PBA nanostructures and a new direction for enhancing the long-term cycling stability of PBA-based AZIBs at high current densities for industrialization prospects.

Rubik's cube PBA frameworks for optimizing the electrochemical performance in alkali metal-ion batteries

PBA frameworks have stood out among metal-organic frameworks because of their easy preparation, excellent stability, porous structures, and rich redox properties. Unfortunately, their non-ideal conductivity and significant volume expansion during cycling prevent more widespread application in alkali-metal-ion (Li+, Na+, and K+) batteries. By changing the type and molar ratio of metal ions, Rubik's PBA frameworks with infinite structural variations were obtained in this study, just like the Rubik's cube undergoes infinite changes during the rotation. X-ray adsorption fine structure measurements have documented the existence and determined the coordination environment of the metal ions in the Rubik's PBA framework. Benefiting from the more stable Rubik's cube structures with diverse composition, enhanced conductivity, and greater adsorption capacity, the obtained Rubik's cubes CoM-PBA anodes, especially CoZn-PBA deliver the enhanced cycling and rate performance in all the alkali-metal-ion batteries. The findings are supported by density functional theory calculations. Ex-situ X-ray photoelectron spectroscopy, and in-situ X-ray diffraction measurements were undertaken to explore the storage mechanism of CoZn-PBA anodes. Our results further demonstrate that the Rubik's cube PBA framework-based materials could be widely applied in the field of alkali-metal-ion batteries.

Maximizing the Structural Stability of the Na-Rich Prussian Blue Analogue Electrode through Charge Cutoff Voltage Regulation

Prussian blue and its analogues (PB/PBAs) are promising sodium-ion battery cathode materials due to their easy synthesis and excellent discharge capacity. However, their low structural stability poses a challenge. One critical factor affecting stability is the charge cutoff voltage. Increasing this voltage can enhance lithium-ion battery capacity but may reduce cycle retention due to intensified electrode-electrolyte interface reactions. This study investigates whether this phenomenon also applies to sodium-ion batteries and proposes an optimal voltage to improve both the capacity and stability. By cycling between 3.8 and 4.2 V, the charge/discharge profiles and redox reaction intensity were analyzed. The correlation between structural stability and charge cutoff voltage was re-evaluated based on these findings. An optimal charge cutoff voltage of 4.1 V was identified, creating an additional plateau during initial charging and altering Na+ ion positioning to enhance capacity. Enhanced mobility of ions and electrons was observed through a stable solid-electrolyte interphase (SEI) formation. Ex situ X-ray diffraction (XRD) confirmed reversible phase transitions and excellent structural stability. This study underscores the strategic use of charge cutoff voltage to enhance both discharge capacity and structural stability, offering insights for advancing PB/PBA cathode materials with improved stability and capacity.

Achieving High OER Performance by Tuning the Co/Mn Content in Prussian Blue Analogues

The need for efficient, economical, and clean energy systems is increasing, and as a result, interest in water-splitting techniques to produce green hydrogen is also increasing. However, the sluggish kinetics of the oxygen evolution reaction (OER) hinders the practical application and widespread use of water-splitting technologies; therefore, to address this challenge, it is essential to develop cost-effective and efficient OER catalysts. In this work, we have synthesized an inexpensive and tunable FeCoMn Prussian blue analogue (PBAs) as an efficient OER catalyst via a straightforward process. The ratio of the Co and Mn to optimize the electrochemical performance, and as a result, the FeCo0.41Mn0.42 PBA catalyst demonstrated the best electrochemical performance (260/304 mV overpotential at 10/50 mA cm-2, a low Tafel slope of 48 mV dec-1 and a good stability of 72 h at 10 mA cm-2). Additionally, X-ray absorption spectroscopy (XAS) measurements and density functional theory (DFT) calculations suggest that the FeCo0.41Mn0.42 PBA possesses the optimized electronic density distribution at the active site (Co), and the doping of Mn and Fe can not only increase the electricity conductivity but also activate the critical H2O deprotonation step.

Zero-Strain Sodium Nickel Ferrocyanide as Cathode Material for Sodium-Ion Batteries with Ultra-Long Lifespan

Prussian blue analogues are recognized as one of the most promising cathode materials for sodium-ion batteries (SIBs) owing to the open 3D framework structure with large interstitial sites and developed Na-ion diffusion channels. However, high content of anion vacancy and poor structural stability have hampered the prospect of their application. In this work, sodium nickel ferrocyanide (Na1.34Ni[Fe(CN)6]0.92, NNHCF) is proposed as cathode material for SIBs. N-coordinated Ni-ion can boost NNHCF to possess less Fe[(CN)6]4- defect, low Na-ion migration barrier, and more negative formation energy compared with Na0.91Cu[Fe(CN)6]0.77 (NCHCF), thus exhibiting more active sites, fast electrochemical kinetics behavior and great structure stability. It is confirmed that NNHCF undergoes a solid solution mechanism without phase evolution for reversible Na-ion intercalation/deintercalation, employing Fe associated with C atom as redox center for charge compensation. Therefore, NNHCF contributes a high initial energy density of 180.94 Wh·g-1 at 10 mA·g-1, excellent rate capability, superior cycling stability with ultra-long lifespan of 13 000 cycles, and low fading rate of 0.0027% per cycle at 500 mA·g-1. This work sheds light on the construction of low-defect PBA cathodes with outstanding dynamics and stability.

Superconcentration Strategy Allows Sodium Metal Compatibility in Deep Eutectic Solvents for Sodium-Ion Batteries

Sodium-ion batteries (SIBs) are a more sustainable alternative to lithium-ion batteries (LIBs) considering the abundance, global distribution, and low cost of sodium. However, their economic impact remains small compared to LIBs, owing in part to the lag in materials development where significant improvements in energy density and safety remain to be realized. Deep eutectic solvents (DESs) show promise as alternatives to conventional electrolytes in SIBs because of their nonflammable nature. However, their practical application has thus far been hindered by their limited electrochemical stability window. In particular, DESs based on N-methylacetamide have thus far been reported not to be stable with sodium metal. In contrast, this work reports a superconcentration strategy where sodium-ion conducting DESs, based on the dissolution of NaFSI in N-methylacetamide, are simultaneously stable with sodium metal and Prussian blue as state-of-the-art positive electrode material. At 60 °C, the nonflammable DES outperforms a conventional liquid electrolyte in terms of rate performance and capacity retention. Therefore, these novel DES compositions pave the way for the use of DESs in practical applications with an improved safety and sustainability.

Synthesis, Structure, and Actual Applications of Double Metal Cyanide Catalysts

Double metal cyanide (DMC) complexes represent a unique family of materials with an open framework structure. The main current application of these complexes in chemical industry is their use as catalysts (DMCCs) of the ring-opening polymerization of propylene oxide (PO), yielding branched polyols, highly demanded in production of polyurethanes and surfactants. The actual problem of chemical fixing carbon dioxide from the atmosphere gave new impetus to the development of DMCCs, which turned out to be effective in oxirane/CO2 copolymerization. In recent years, new types and formulations of DMCCs were created, so that greater understanding of the reaction mechanisms was achieved and new fields of catalytic applications were found. In the present review, we summarized background and actual information about the synthesis, structure, and mechanisms of the action of DMCCs, as well as their application in the development of new materials and fine chemicals.

Self-Sustained-Release Strategy Realizes Colloid Oriented Assembly to Fabricate Prussian Blue with Hierarchical Structure

The controlled self-assembly of nanomaterials has been a great challenge in nanosynthesis, especially for hierarchical architectures with high complexity. Particularly, the structural design of Prussian blue (PB) series materials with robustness and fast nucleation is even more difficult. Herein, a self-sustained-release strategy based on the slow release of metal ions from coordination ions is proposed to guide the assembly of PB crystals. The key to this strategy is the slow release by ligand, which can create ultra-low concentrations of metal ions so as to provide the possibility to realize the surface charge manipulation of PB primary colloids. By adding electrolyte or changing the polarity of the solution, the surface charge regulation of PB colloid is realized, and the PB hierarchical structures with branch fractal structure (PB-BS), octahedral fractal structure, and spherical fractal structure are effectively constructed. This work not only achieves the designability of the PB structure, but also synchronizes the functionalization during the PB assembly growth process by in situ encapsulation of the effective catalytic active component L-Ascorbic acid. As a result, the assembled PB-BS exhibits greatly enhanced catalytic activity and selectivity in styrene oxidation with the selectivity of oxidized styrene increasing from 35.6% (PB) to 80.5% (PB-BS).

Prussian White/Reduced Graphene Oxide Composite as Cathode Material to Enhance the Electrochemical Performance of Sodium-Ion Battery

Prussian white (PW) is considered a promising cathode material for sodium-ion batteries. However, challenges, such as lattice defects and poor conductivity limit its application. Herein, the composite materials of manganese-iron based Prussian white and reduced graphene oxide (PW/rGO) were synthesized via a one-step in situ synthesis method with sodium citrate, which was employed both as a chelating agent to control the reaction rate during the coprecipitation process of PW synthesis and as a reducing agent for GO. The low precipitation speed helps minimize lattice defects, while rGO enhances electrical conductivity. Furthermore, the one-step in situ synthesis method is simpler and more efficient than the traditional synthesis method. Compared with pure PW, the PW/rGO composites exhibit significantly improved electrochemical properties. Cycling performance tests indicated that the PW/rGO-10 sample exhibited the highest initial discharge capacity and the best cyclic stability. The PW/rGO-10 has an initial discharge capacity of 128 mAh g-1 at 0.1 C (1 C = 170 mA g-1), and retains 49.53% capacity retention after 100 cycles, while the PW only delivers 112 mAh g-1 with a capacity retention of 17.79% after 100 cycles. Moreover, PW/rGO-10 also shows better rate performance and higher sodium ion diffusion coefficient (DNa+) than the PW sample. Therefore, the incorporation of rGO not only enhances the electrical conductivity but also promotes the rapid diffusion of sodium ions, effectively improving the electrochemical performance of the composite as a cathode material for sodium-ion batteries.

Prussian Blue Analogue-Templated Nanocomposites for Alkali-Ion Batteries: Progress and Perspective

Lithium-ion batteries (LIBs) have dominated the portable electronic and electrochemical energy markets since their commercialisation, whose high cost and lithium scarcity have prompted the development of other alkali-ion batteries (AIBs) including sodium-ion batteries (SIBs) and potassium-ion batteries (PIBs). Owing to larger ion sizes of Na+ and K+ compared with Li+, nanocomposites with excellent crystallinity orientation and well-developed porosity show unprecedented potential for advanced lithium/sodium/potassium storage. With enticing open rigid framework structures, Prussian blue analogues (PBAs) remain promising self-sacrificial templates for the preparation of various nanocomposites, whose appeal originates from the well-retained porous structures and exceptional electrochemical activities after thermal decomposition. This review focuses on the recent progress of PBA-derived nanocomposites from their fabrication, lithium/sodium/potassium storage mechanism, and applications in AIBs (LIBs, SIBs, and PIBs). To distinguish various PBA derivatives, the working mechanism and applications of PBA-templated metal oxides, metal chalcogenides, metal phosphides, and other nanocomposites are systematically evaluated, facilitating the establishment of a structure-activity correlation for these materials. Based on the fruitful achievements of PBA-derived nanocomposites, perspectives for their future development are envisioned, aiming to narrow down the gap between laboratory study and industrial reality.

Synthesis of a Sodium-Ion Cathode Material Na3Fe2(SO4)3F with the Help of Fluorine Element

The development of cathode materials has always been one of the most crucial areas of research in the field of sodium-ion batteries. Sulfate-based polyanionic materials, known for their high working voltage characteristics, have received widespread attention. In this work, a fluoro-sulfate sodium-ion battery cathode material, Na3Fe2(SO4)3F modified with carbon nanotubes, was developed using a low-temperature solid-state annealing method. This Na3Fe2(SO4)3F cathode exhibits an exceptionally high voltage of 3.77 V, excellent discharge capacity (102 mAh/g at 0.1C), and good rate capability. This material broadens the research directions for cathode materials and holds promise as a foundation for the further development of high-performance sodium-ion batteries.

Controlling A x Mn[Fe(CN)6] charge transfer pathways through tilt-engineering for enhanced metal-to-metal interactions

The induction of structural distortion in a controlled manner through tilt engineering has emerged as a potent method to finely tune the physical characteristics of Prussian blue analogues. Notably, this distortion can be chemically induced by filling their pores with cations that can interact with the cyanide ligands. With this objective in mind, we optimized the synthetic protocol to produce the stimuli-responsive Prussian blue analogue A x Mn[Fe(CN)6] with A = K+, Rb+, and Cs+, to tune its stimuli-responsive behavior by exchanging the cation inside pores. Our crystallographic analyses reveal that the smaller the cation, the more pronounced the structural distortion, with a notable 20-degree Fe-CN tilting when filling the cavities with K+, 10 degrees with Rb+, and 2 degrees with Cs+. Moreover, this controlled distortion offers a means to switch on/off its stimuli-responsive behavior, while modifying its magnetic response. Thereby empowering the manipulation of the PBA's physical properties through cationic exchange.

Achieving Superior Cyclability Pouch Cells with Oxygen Vacancy-Moderated P'2/P3 Hybrid Layered Sodium Cathode Materials

Layered P2-type sodium manganese oxide has emerged as a promising cathode candidate for sodium-ion batteries due to its appealing cost-effectiveness and high discharge voltage. However, its practical capacity within the voltage range of 2.0-4.0 V (vs Na+/Na) is relatively low, and its rate capability is hampered by the adverse charge/vacancy ordering during charge/discharge. In this study, a layered P'2/P3 mixed-phase Na0.8-aMn0.675Ni0.225Li0.1O2-x cathode with high (003) crystal plane intensity was designed by introducing oxygen vacancies to P2-structured materials. Aided by these advantages, the hybrid cathode material demonstrates impressive structural and thermal stability and faster Na-ion diffusion kinetics compared to a regular P2 material. Half-cell shows an initial discharge capacity retention of 101 mA h/g at 12 mA/g and 92.25% retention after 500 cycles at 120 mA/g. In combination with a hard carbon anode, the 0.5 A h pouch cell achieved a prevailing capacity retention of 95.2% after 2600 cycles at 36 mA/g. This work opens new dimensions for layered cathode materials with the aim of achieving superior cyclabilities.

Leveraging Entropy and Crystal Structure Engineering in Prussian Blue Analogue Cathodes for Advancing Sodium-Ion Batteries

The synergistic engineering of chemical complexity and crystal structures has been applied to Prussian blue analogue (PBA) cathodes in this work. More precisely, the high-entropy concept has been successfully introduced into two structure types of identical composition, namely, cubic and monoclinic. Through the utilization of a variety of complementary characterization techniques, a comprehensive investigation into the electrochemical behavior of the cubic and monoclinic PBAs has been conducted, providing nuanced insights. The implementation of the high-entropy concept exhibits crucial selectivity toward the intrinsic crystal structure. Specifically, while the overall cycling stability of both cathode systems is significantly improved, the synergistic interplay of crystal structure engineering and entropy proves particularly significant. After optimization, the cubic PBA demonstrates structural advantages, showcasing good reversibility, minimal capacity loss, high thermal stability, and unparalleled endurance even under harsh conditions (high specific current and temperature).

Prussian Blue-Assisted NIR Triggered In-Situ Polymerized Nanocomposite Hydrogel for Wound Repair

Hydrogels are commonly used as wound dressings to help maintain a moist environment around the wound and isolate contaminants, thus promoting healing. For irregular wounds, the slow healing process and even infection may occur due to the inability of dressings to adhere well to the wound. Prussian blue (PB) is a metal-organic framework (MOF) material with excellent photothermal conversion and superior stability. In this paper, a kind of near-infrared (NIR) light triggered in-situ polymerized antimicrobial hydrogel was prepared. The free radical initiator was encapsulated in the hollow PB by a phase change material (PCM) to maintain stability. The raised temperature triggered by NIR induced the release and decomposition of the initiator. The matrix was formed by the cross-linking of double bonds on modified chitosan. The quaternary amine groups of modified chitosan and the photothermal properties of PB enhanced the antimicrobial properties of the hydrogel. High-quality wound healing was demonstrated in the whole skin defect model. This study provides a new reference for the preparation of in-situ polymerized hydrogel dressings for irregular wounds.

A Bandgap-Tuned Tetragonal Perovskite as Zero-Strain Anode for Potassium-Ion Batteries

PIBs are emerging as a promising energy storage system due to high abundance of potassium resources and theoretical energy density, however, progress of PIBs is severely hindered by structural instability and poor cycling of anode material during continual insertion and extraction of larger-sized K+. Hence, developing anode material with structural stability and stable cycling remains a great challenge. Herein, band gap-tuned Mo-doped and carbon-coated lead titanate (CMPTO) with zero-strain K+ storage is presented as ultra-stable PIBs anode. Mo doping introduces narrowed band gap and optimized crystal lattice for enhanced intrinsic electron and ion transfer. Demonstrated by in situ XRD characterizations, the crystal structure stays stable with unchanged peak positions, fully revealing zero-strain characteristic of CMPTO anode during potassium storage for stable cyclic capability. Ultimately, CMPTO anode achieved ultra-stable cycling performance of 7000 cycles at 500 mA g-1 with high capacity retention of 90 % and considerable specific capacity of 130.9 mAh g-1 after 600 cycles at 100 mA g-1; with relatively large density, CMPTO realized eminent volumetric capacity of 1111.09 mAh cm-3 and ultra-long cycling life of 10000 cycles at 7041 mA cm-3. This work introduces a promisingly new route into developing anode materials with ultra-stable performance for PIBs.

Impedimetric Measurement of Exchange Currents and Ionic Diffusion Coefficients in Individual Pseudocapacitive Nanoparticles

Among electroanalytical techniques, electrochemical impedance spectroscopy (EIS) offers the unique advantage of a high degree of frequency resolution. This enables EIS to readily deconvolute between the capacitive, resistive, and diffusional processes that underlie electrochemical devices. Here, we report the measurement of impedance spectra of individual, pseudocapacitive nanoparticles. We chose Prussian blue as our model system, as it couples an electron-transfer reaction with sodium ion intercalation-processes which, while intrinsically convoluted, can be readily resolved using EIS. We used a scanning electrochemical cell microscope (SECCM) to isolate single Prussian blue particles in a microdroplet and measured their impedance spectra using the multi-sine, fast Fourier transform technique. In doing so, we were able to extract the exchange current density and sodium ion diffusivity for each particle, which respectively inform on their electronic and ionic conductivities. Surprisingly, these parameters vary by over an order of magnitude between particles and are not correlated to particle size nor to each other. The implication of this apparent heterogeneity is that in a hypothetical battery cathode, one active particle may transfer electrons 10 times faster than its neighbor; another may suffer from sluggish sodium ion transport and have restricted charging rate capabilities compared to a better-performing particle elsewhere in the same electrode. Our results inform on this intrinsic heterogeneity while demonstrating the utility of EIS in future single-particle studies.

Advances in Inorganic Foam Materials Fabricated Via Blowing Strategy: A Comprehensive Review

Two-dimensional (2D) materials with excellent properties and widespread applications have been explosively investigated. However, their conventional synthetic methods exhibit concerns of limited scalability, complex purification process, and incompetence of prohibiting their restacking. The blowing strategy, characterized by gas-template, low-cost, and high-efficiency, presents a valuable avenue for the synthesis of 2D-based foam materials and thereby addresses these constraints. Whereas, its comprehensive introduction has been rarely outlined so far. This review commences with a synopsis of the blowing strategy, elucidating its development history, the statics and kinetics of the blowing process, and the choice of precursor and foaming agents. Thereafter, we dwell at length on across-the-board foams enabled by the blowing route, like BxCyNz foams, carbon foams, and diverse composite foams consisting of carbon and metal compounds. Following that, a wide-ranging evaluation of the functionality of the foam products in fields such as energy storage, electrocatalysis, adsorption, etc. is discussed, revealing their distinctive strength originated from the foam structure. Finally, after concluding the current progress, we provide some personal discussions on the existing challenges and future research priorities in this rapidly developing method.

Constructing hierarchical MoS2/WS2 heterostructures in dual carbon layer for enhanced sodium ions batteries performance

The escalating global demand for clean energy has spurred substantial interest in sodium-ion batteries (SIBs) as a promising solution for large-scale energy storage systems. However, the insufficient reaction kinetics and considerable volume changes inherent to anode materials present significant hurdles to enhancing the electrochemical performance of SIBs. In this study, hierarchical MoS2/WS2 heterostructures were constructed into dual carbon layers (HC@MoS2/WS2@NC) and assessed their suitability as anodes for SIBs. The internal hard carbon core (HC) and outer nitrogen-doped carbon shell (NC) effectively anchor MoS2/WS2, thereby significantly improving its structural stability. Moreover, the conductive carbon components expedite electron transport during charge-discharge processes. Critically, the intelligently engineered interface between MoS2 and WS2 modulates the interfacial energy barrier and electric field distribution, promoting faster ion transport rates. Capitalizing on these advantageous features, the HC@MoS2/WS2@NC nanocomposite exhibits outstanding electrochemical performance when utilized as an anode in SIBs. Specifically, it delivers a high capacity of 415 mAh/g at a current density of 0.2 A/g after 100 cycles. At a larger current density of 2 A/g, it maintains a commendable capacity of 333 mAh/g even after 1000 cycles. Additionally, when integrated into a full battery configuration with a Na3V2(PO4)3 cathode, the Na3V2(PO4)3//HC@MoS2/WS2@NC full cell delivers a high capacity of 120 mAh/g after 300 cycles at 1 A/g. This work emphasizes the substantial improvement in battery performance that can be attained through the implementation of dual carbon confinement, offering a constructive approach to guide the design and development of next-generation anode materials for SIBs.

Air-Stable High-Entropy Layered Oxide Cathode with Enhanced Cycling Stability for Sodium-Ion Batteries

O3-type layered oxides have been extensively studied as cathode materials for sodium-ion batteries due to their high reversible capacity and high initial sodium content, but they suffer from complex phase transitions and an unstable structure during sodium intercalation/deintercalation. Herein, we synthesize a high-entropy O3-type layered transition metal oxide, NaNi0.3Cu0.05Fe0.1Mn0.3Mg0.05Ti0.2O2 (NCFMMT), by simultaneously doping Cu, Mg, and Ti into its transition metal layers, which greatly increase structural entropy, thereby reducing formation energy and enhancing structural stability. The high-entropy NCFMMT cathode exhibits significantly improved cycling stability (capacity retention of 81.4% at 1C after 250 cycles and 86.8% at 5C after 500 cycles) compared to pristine NaNi0.3Fe0.4Mn0.3O2 (71% after 100 cycles at 1C), as well as remarkable air stability. Finally, the NCFMMT//hard carbon full-cell batteries deliver a high initial capacity of 103 mAh g-1 at 1C, with 83.8 mAh g-1 maintained after 300 cycles (capacity retention of 81.4%).

Realizing long-term cycling stability of O3-type layered oxide cathodes for sodium-ion batteries

O3-type layered oxide cathodes are promising for practical sodium-ion batteries (SIBs) owing to their high theoretical capacity, facile synthesis, and sufficient Na+ storage. However, they face challenges such as rapid capacity loss and poor cycling stability, mainly attributed to irreversible phase transitions. To address these challenges, a novel cathode material, Li/Sn co-substituted O3-Na0.95Li0.07Sn0.01Ni0.22Fe0.2Mn0.5O2 (LSNFM), has been designed by regulating the electronic structure, in which Li+ activates more redox reactions of Ni2+/3+ and Fe3+/4+ above 2.5 V and suppresses the redox reactivity of Mn3+/4+ below 2.5 V, while Sn4+ can prevent the charge delocalization in the transition metal layer, contributing to structural stability. Due to this synergistic effect, the as-prepared LSNFM electrode with high structural reversibility displays a 27.2% capacity increase contributed by the high-voltage transition metal ion redox activity and exhibits excellent long-term cycling stability, an 84.0% capacity retention after 500 cycles at 1 C and an 84.7% capacity retention after 2000 cycles at 5 C. The fundamental mechanism is fully investigated using systematic in situ/ex situ characterization techniques and density functional theory computations. This work provides a paradigm for designing long-term cycle life cathode materials by synergistically regulating the electronic structure in practical SIBs.

Dehydration Achieving the Iron Spin State Regulation of Prussian Blue for Boosted Sodium-Ion Storage Performance

Prussian blue analogs (PBAs) show promise as cathodes for sodium-ion batteries due to their notable cycle stability, cost-effectiveness, and eco-friendly nature, yet the presence of interstitial water limits the specific capacity and obstructs Na+ mobility within the material. Although considerable experimental efforts are focused on dehydrating water for capacity enhancement, there is still a deficiency of a comprehensive understanding of the low capacity of low-spin Fe resulting from interstitial water, which holds significance in Na+ storage. This study introduces a novel gas-assisted heat treatment method to efficiently remove interstitial water from Fe-based PBA (NaFeHCF) electrodes and combines experiments and theoretical calculations to reveal the iron spin state regulation that is related to the capacity enhancement mechanism. This dehydration strategy significantly enhances battery capacity, especially the portion at higher voltages (3.4-4.0 V). The increase in capacity is attributed to the following factors: an enhanced proportion of Fe2+, reduced water content which facilitates faster charge transfer, and the activation of low spin Fe2+. The optimized NaFeHCF demonstrated impressive half-cell performance of retaining 87.3% capacity after 2000 cycles at a 5 C rate and achieving 100 mAh g-1 capacity over 200 cycles when being paired with hard carbon, exhibiting its practical potential.

Recent progress in high-voltage P2-Na x TMO2 materials and their future perspectives

P2-type layered materials (Na x TMO2) have become attractive cathode electrodes owing to their high theoretical energy density and simple preparation. However, they still face severe phase transition and low conductivity. Current research on Na x TMO2 is mostly focused on the modification of bulk materials, and the application performances have been infrequently addressed. This review summarizes the information on current common P2-Na x TMO2 materials and discusses their sodium-storage mechanisms. Furthermore, modification strategies to improve their performance are addressed for practical applications based on a range of key parameters (output voltage, specific capacity, and lifespan). We also discuss the future development trends and application prospects for P2 cathode materials.

Prussian Blue Analogues for Sodium-Ion Battery Cathodes: A Review of Mechanistic Insights, Current Challenges, and Future Pathways

Prussian blue analogues (PBAs) have emerged as highly promising cathode materials for sodium-ion batteries (SIBs) due to their affordability, facile synthesis, porous framework, and high theoretical capacity. Despite their considerable potential, practical applications of PBAs face significant challenges that limit their performance. This review offers a comprehensive retrospective analysis of PBAs' development history as cathode materials, delving into their reaction mechanisms, including charge compensation and ion diffusion mechanisms. Furthermore, to overcome these challenges, a range of improvement strategies are proposed, encompassing modifications in synthesis techniques and enhancements in structural stability. Finally, the commercial viability of PBAs is examined, alongside discussions on advanced synthesis methods and existing concerns regarding cost and safety, aiming to foster ongoing advancements of PBAs for practical SIBs.

In Situ Construction of Inorganics-Rich Cathode-Electrolyte Interface toward Long-Life Prussian White Cathode

Prussian white (PW) is one of the most promising candidates as a cathode for sodium-ion batteries (SIBs) because of its high theoretical capacity, excellent rate performance, and low production cost. However, PW materials suffer severe capacity decay during long-term cycling. In this work, a robust cathode electrolyte interface (CEI) is designed on the PW cathode by employing cresyl diphenyl phosphate (CDP) and adiponitrile (ADN) as electrolyte additives. CDP and ADN possess higher highest occupied molecular orbital energy levels (HOMO) than other solvents, leading to the preferential decomposition of CDP and ADN to construct an inorganics-rich CEI layer in situ on the PW cathode. Benefiting from this CEI layer, the degradation of PW is effectively inhibited during the long cycling. The Na||PW cell achieves an excellent cycling performance with a capacity retention of 85.62% after 1400 cycles. This work presented here provides a feasible strategy for improving the cycling performance of PW by electrolyte modification.

Rapid Construction of Double Crystalline Prussian Blue Analogue Hetero-Superstructure

The controllable construction of complex metal-organic coordination polymers (CPs) merits untold scientific and technological potential, yet remains a grand challenge of one-step construction and modulating simultaneously valence states of metals and topological morphology. Here, a thiocyanuric acid (TCA)-triggered strategy is presented to one-step rapid synthesis a double-crystalline Prussian blue analogue hetero-superstructure (PBA-hs) that comprises a Co3[Fe(CN)6]2 cube overcoated with a KCo[Fe(CN)6] shell, followed by eight self-assembled small cubes on vertices. Unlike common directing surfactants, TCA not only acts as a trigger for the fast growth of KCo[Fe(CN)6] on the Co3[Fe(CN)6]2 phase resulting in a PBA-on-PBA hetero-superstructure, but also serves as a flange-like bridge between them. By combining experiments with simulations, a deprotonation-induced electron transfer (DIET) mechanism is proposed for formation of second phase in PBA-hs, differing from thermally and photo-induced electron transfer processes. To prove utility, the calcined PBA-hs exhibits enhanced oxygen evolution reaction performance. This work provides a new method to design of novel CPs for enriching chemistry and material science. This work offers a practical approach to design novel CPs for enriching chemistry and material science.

Research Progress of Prussian Blue and Its Analogs as High-Performance Cathode Nanomaterials for Sodium-Ion Batteries

Sodium-ion batteries (SIBs) are investigated as promising alternatives to lithium-ion batteries (LIBs) on account of the economical abundance and reliable availability of sodium, as well as its analogous chemical properties compared to lithium. Nevertheless, the performance of SIBs is severely restricted by the availability of satisfactory cathode nanomaterials with stable frameworks to accommodate the transportation of large-sized Na+ ions. These challenges can be effectively resolved when exploiting Prussian blue (PB) and its analogs (PBAs) as SIB cathodes. This is mainly because PB and PBAs have 3D open frameworks with large interstitial space, which are more favorable for fast insertion/extraction of Na+ ions during the charging/discharging process, thus enabling the improvement of integrated performance in SIB systems. This overview offers a comprehensive summarization of recent advancements in the electrochemical performance of PB and PBAs when employing them as cathodes in SIBs. For better understanding, the fabrication strategy, structural characterization, and electrochemical performance exposition are systematically organized and explained according to tuning PB and metal-based PBAs. Additionally, the current trajectories and prospective future directions pertaining to the utilization of PB and PBA cathodes in the SIB system are thoroughly examined and deliberated upon.

Sodium layered oxide cathodes: properties, practicality and prospects

Rechargeable sodium-ion batteries (SIBs) have emerged as an advanced electrochemical energy storage technology with potential to alleviate the dependence on lithium resources. Similar to Li-ion batteries, the cathode materials play a decisive role in the cost and energy output of SIBs. Among various cathode materials, Na layered transition-metal (TM) oxides have become an appealing choice owing to their facile synthesis, high Na storage capacity/voltage that are suitable for use in high-energy SIBs, and high adaptivity to the large-scale manufacture of Li layered oxide analogues. However, going from the lab to the market, the practical use of Na layered oxide cathodes is limited by the ambiguous understanding of the fundamental structure-performance correlation of cathode materials and lack of customized material design strategies to meet the diverse demands in practical storage applications. In this review, we attempt to clarify the fundamental misunderstandings by elaborating the correlations between the electron configuration of the critical capacity-contributing elements (e.g., TM cations and oxygen anion) in oxides and their influence on the Na (de)intercalation (electro)chemistry and storage properties of the cathode. Subsequently, we discuss the issues that hinder the practical use of layered oxide cathodes, their origins and the corresponding strategies to address their issues and accelerate the target-oriented research and development of cathode materials. Finally, we discuss several new Na layered cathode materials that show prospects for next-generation SIBs, including layered oxides with anion redox and high entropy and highlight the use of layered oxides as cathodes for solid-state SIBs with higher energy and safety. In summary, we aim to offer insights into the rational design of high-performance Na layered oxide cathode materials towards the practical realization of sustainable electrochemical energy storage at a low cost.

Industrial-Scale Hard Carbon Designed to Regulate Electrochemical Polarization for Fast Sodium Storage

Given the merits of abundant resource, low cost and high electrochemical activity, hard carbons have been regarded as one of the most commercializable anode material for sodium-ion batteries (SIBs). However, poor rate capability is one of the main obstacles that severely hinder its further development. In addition, the relationships between preparation method, material structure and electrochemical performance have not been clearly elaborated. Herein, a simple but effective strategy is proposed to accurately construct the multiple structural features in hard carbon via adjusting the components of precursors. Through detailed physical characterization of the hard carbons derived from different regulation steps, and further combined with in-situ Raman and galvanostatic intermittent titration technique (GITT) analysis, the network of multiple relationships between preparation method, microstructure, sodium storage behavior and electrochemical performance have been successfully established. Simultaneously, exceptional rate capability about 108.8 mAh g-1 at 8 A g-1 have been achieved from RHC sample with high reversible capacity and desirable initial Coulombic efficiency (ICE). Additionally, the practical applications can be extended to cylindrical battery with excellent cycle behaviors. Such facile approach can provide guidance for large-scale production of high-performance hard carbons and provides the possibility of building practical SIBs with high energy density and durability.

A quasi-solid-state self-healing flexible zinc-ion battery using a dual-crosslinked hybrid hydrogel as the electrolyte and Prussian blue analogue as the cathode material

Due to their excellent safety and lower cost, aqueous Zn-ion batteries (AZIBs) have garnered extensive interest among various energy-storage systems. Here we report a quasi-solid-state self-healing AZIB by using a hybrid hydrogel which consists of dual-crosslinked polyacrylamide and polyvinyl alcohol as a flexible electrolyte and a cobalt hexacyanoferrate (K3.24Co3[Fe(CN)6]2·12.6H2O) Prussian blue analogue as the cathode material. The obtained hybrid hydrogel showed a superhigh fracture strain of up to 1490%, which was almost 15 times higher than that of the original size. Due to the fast formation of hydrogen bonds, the self-healed hydrogel from two pieces still displayed 1165% strain upon failure. As a result, the self-healed battery delivered stable capacities of 119.1, 108.6 and 103.0 mA h g-1 even after being completely cut into 2, 3 and 4 pieces, respectively. The battery capacity recovery rates for each bending cycle exceeded 99.5%, 99.8%, 98.6% and 98.9% during four continuous bending cycles (30 times bending at 90° for each cycle), which indicates outstanding flexibility and self-healing capability. In parallel, the hydrogel electrolyte displayed a broader electrochemically stable window of 3.37 V due to the suppression of water splitting and low overvoltage during the 500 h cycling in a symmetric cell. Zinc dendrites were also suppressed as evidenced in symmetric cell measurements. The assembled AZIB exhibited an initial capacity of 176 mA h g-1 upon vertical bending. The battery showed a reliable capacity of 140.7 mA h g-1 at 0.2 A g-1 after 100 cycles along with a coulombic efficiency of >99%. A reliable capacity of nearly 100 mA h g-1 was retained after 300 cycles at 1.0 A g-1. The highly flexible and self-healing AZIB demonstrates great potential in various wearable electronic devices.

Hierarchical MOFs with Good Catalytic Properties and Structural Stability in Oxygen-Rich and High-Temperature Environments

Metal-organic framework materials are ideal materials characterized by open frameworks, adjustable components, and high catalytic activity. They are extensively utilized for catalysis. Due to decomposition and structural collapse under high temperatures and an oxygen-rich environment, the potential of thermal catalysis is greatly limited. In this research, Co-rich hollow spheres (Co-HSs) with a gradient composition are designed and synthesized to investigate their thermal catalytic properties in the ammonium perchlorate（AP）system. The results demonstrate that Co-HSs@AP exhibits good thermal catalytic activity and a high-temperature decomposition of 292.5 °C, which is 121.6 °C lower than pure AP. The hierarchical structure confers structural stability during the thermal decomposition process. Thermogravimetry-infrared indicates that the inclusion of Co-HSs successfully boosts the level of reactive oxygen species and achieves thorough oxidation of NH3. Based on the above phenomenon, macro dynamics calculations are carried out. The results show that Co-HSs can promote the circulation of lattice oxygen and reactive oxygen species and the multidimensional diffusion of NH3 in an oxygen-rich environment. This material has significant potential for application in the fields of thermal catalysis and ammonia oxidation.

A H2O2 Self-Charging Zinc Battery with Ultrafast Power Generation and Storage

Self-charging power systems are considered as promising alternatives for off-grid energy devices to provide sustained electricity supply. However, the conventional self-charging systems are severely restricted by the energy availability and time-consuming charging process as well as insufficient capacity. Herein, we developed an ultrafast H2O2 self-charging aqueous Zn/NaFeFe(CN)6 battery, which simultaneously integrates the H2O2 power generation and energy storage into a battery configuration. In such battery, the chemical energy conversion of H2O2 can generate electrical energy to self-charge the battery to 1.7 V through the redox reaction between H2O2 and NaFeFe(CN)6 cathode. The thermodynamically and kinetically favorable redox reaction contributes to the ultrafast H2O2 self-charging rate and the extremely short self-charging time within 60 seconds. Moreover, the rapid H2O2 power generation can promptly compensate the energy consumption of battery to provide continuous electricity supply. Impressively, this self-charging battery shows excellent scalability of device architecture and can be designed to a H2O2 single-flow battery of 7.06 Ah to extend the long-term energy supply. This work not only provides a route to design self-charging batteries with fast charging rate and high capacity, but also pushes forward the development of self-charging power systems for advanced large-scale energy storage applications.

Recent advances in rational design for high-performance potassium-ion batteries

The growing global energy demand necessitates the development of renewable energy solutions to mitigate greenhouse gas emissions and air pollution. To efficiently utilize renewable yet intermittent energy sources such as solar and wind power, there is a critical need for large-scale energy storage systems (EES) with high electrochemical performance. While lithium-ion batteries (LIBs) have been successfully used for EES, the surging demand and price, coupled with limited supply of crucial metals like lithium and cobalt, raised concerns about future sustainability. In this context, potassium-ion batteries (PIBs) have emerged as promising alternatives to commercial LIBs. Leveraging the low cost of potassium resources, abundant natural reserves, and the similar chemical properties of lithium and potassium, PIBs exhibit excellent potassium ion transport kinetics in electrolytes. This review starts from the fundamental principles and structural regulation of PIBs, offering a comprehensive overview of their current research status. It covers cathode materials, anode materials, electrolytes, binders, and separators, combining insights from full battery performance, degradation mechanisms, in situ/ex situ characterization, and theoretical calculations. We anticipate that this review will inspire greater interest in the development of high-efficiency PIBs and pave the way for their future commercial applications.

Cathode Electrolyte Interphase Engineering for Prussian Blue Analogues in Lithium-Ion Batteries

The increasing use of low-cost lithium iron phosphate cathodes in low-end electric vehicles has sparked interest in Prussian blue analogues (PBAs) for lithium-ion batteries. A major challenge with iron hexacyanoferrate (FeHCFe), particularly in lithium-ion systems, is its slow kinetics in organic electrolytes and valence state inactivation in aqueous ones. We have addressed these issues by developing a polymeric cathode electrolyte interphase (CEI) layer through a ring-opening reaction of ethylene carbonate triggered by OH- radicals from structural water. This facile approach considerably mitigates the sluggish electrochemical kinetics typically observed in organic electrolytes. As a result, FeHCFe has achieved a specific capacity of 125 mAh g-1 with a stable lifetime over 500 cycles, thanks to the effective activation of Fe low-spin states and the structural integrity of the CEI layers. These advancements shed light on the potential of PBAs to be viable, durable, and efficient cathode materials for commercial use.

Cation/Anion-Dual regulation in Na3MnTi(PO4)3 cathode achieves the enhanced electrochemical properties of Sodium-Ion batteries

Na3MnTi(PO4)3 (NMTP) emerges as a promising cathode material with high-performance for sodium-ion batteries (SIBs). Nevertheless, its development has been limited by several challenges, including poor electronic conductivity, the Mn3+ Jahn-Teller effect, and the presence of a Na+/Mn2+ cation mixture. To address these issues, we have developed a cation/anion-dual regulation strategy to activate the redox reactions involving manganese, thereby significantly enhancing the performance of NMTP. This strategy simultaneously enhances the structural dynamics and facilitates rapid ion transport at high rates by inducing the formation of sodium vacancy. The combined effects of these modifications lead to a substantial improvement in specific capacity (79.1 mAh/g), outstanding high-rate capabilities (35.9 mAh/g at 10C), and an ultralong cycle life (only 0.040 % capacity attenuation per cycle over 250 cycles at 1C for Na3.34Mn1.2Ti0.8(PO3.98F0.02)3) when used as a cathode material in SIBs. Furthermore, its performance in full cell demonstrates impressive rate capability (44.4 mAh/g at 5C) and exceptional cycling stability (with only 0.116 % capacity decay per cycle after 150 cycles at 1C), suggesting its potential for practical applications. This work presents a dual regulation strategy targeting different sites, offering a significant advancement in the development of NASICON phosphate cathodes for SIBs.

Sulfur-bridged bonds enabled structure modulation and space confinement of MnS for superior sodium-ion capacitors

Manganese sulfide (MnS) is a promising converion-type anode for sodium storage, owing to the virtues of high theoretical capacity, coupled with it crustal abundance and cost-effectiveness. Nevertheless, MnS suffers from inadequate electronic conductivity, sluggish Na+ reaction kinetics and considerable volume variation during discharge/charge process, thereby impeding its rate capability and capacity retention. Herein, a novel lamellar heterostructured composite of Fe-doped MnS nanoparticles/positively charged reduced graphene oxide (Fe-MnS/PG) was synthesized to overcome these issues. The Fe-doping can accelerate the ion/electron transfer, endowing fast electrochemical kinetics of MnS. Meanwhile, the graphene space confinement with strong MnSC bond interactions can facilite the interfacial electron transfer, hamper volume expansion and aggregation of MnS nanoparticles, stabilizing the structural integrity, thus improving the Na+ storage reversibility and cyclic stability. Combining the synergistic effect of Fe-doping and space confinement with strong MnSC bond interactions, the as-produced Fe-MnS/PG anode presents a remarkable capacity of 567 mAh/g at 0.1 A/g and outstanding rate performance (192 mAh/g at 10 A/g). Meanwhile, the as-assembled sodium-ion capacitor (SIC) can yield a high energy density of 119 Wh kg-1 and a maximum power density of 17500 W kg-1, with capacity retention of 77 % at 1 A/g after 5000 cycles. This work offers a promising strategy to develop MnS-based practical SICs with high energy and long lifespan, and paves the way for fabricating advanced anode materials.

Influence of Interlayer Cation Ordering on Na Transport in P2-Type Na0.67-xLiy Ni0.33-zMn0.67+zO2 for Sodium-Ion Batteries

P2-type Na2/3Ni1/3Mn2/3O2 (PNNMO) has been extensively studied because of its desirable electrochemical properties as a positive electrode for sodium-ion batteries. PNNMO exhibits intralayer transition-metal ordering of Ni and Mn and intralayer Na+/vacancy ordering. The Na+/vacancy ordering is often considered a major impediment to fast Na+ transport and can be affected by transition-metal ordering. We show by neutron/X-ray diffraction and density functional theory (DFT) calculations that Li doping (Na2/3Li0.05Ni1/3Mn2/3O2, LFN5) promotes ABC-type interplanar Ni/Mn ordering without disrupting the Na+/vacancy ordering and creates low-energy Li-Mn-coordinated diffusion pathways. A structure model is developed to quantitatively identify both the intralayer cation mixing and interlayer cationic stacking fault densities. Quasielastic neutron scattering reveals that the Na+ diffusivity in LFN5 is enhanced by an order of magnitude over PNNMO, increasing its capacity at a high current. Na2/3Ni1/4Mn3/4O2 (NM13) lacks Na+/vacancy ordering but has diffusivity comparable to that of LFN5. However, NM13 has the smallest capacity at a high current. The high site energy of Mn-Mn-coordinated Na compared to that of Ni-Mn and higher density of Mn-Mn-coordinated Na+ sites in NM13 disrupts the connectivity of low-energy Ni-Mn-coordinated diffusion pathways. These results suggest that the interlayer ordering can be tuned through the control of composition, which has an equal or greater impact on Na+ diffusion than the Na+/vacancy ordering.

Toward Ultrahigh Rate and Cycling Performance of Cathode Materials of Sodium Ion Battery by Introducing a Bicontinuous Porous Structure

The emerging sodium-ion batteries (SIBs) are one of the most promising candidates expected to complement lithium-ion batteries and diversify the battery market. However, the exploitation of cathode materials with high-rate performance and long-cycle stability for SIBs has remained one of the major challenges. To this end, an efficient approach to enhance rate and cycling performance by introducing an ordered bicontinuous porous structure into cathode materials of SIBs is demonstrated. Prussian blue analogues (PBAs) are selected because they are recognized as a type of most promising SIB cathode materials. Thanks to the presence of 3D continuous channels enabling fast Na+ ions diffusion as well as the intrinsic mechanical stability of bicontinuous architecture, the resultant PBAs exhibit excellent rate capability (80 mAh g-1 at 2.5 A g-1) and ultralong cycling life (>3000 circulations at 0.5 A g-1), reaching the top performance of the reported PBA-based cathode materials. This study opens a new avenue for boosting sluggish ion diffusion kinetics in electrodes of rechargeable batteries and also provides a new paradigm for solving the dilemma that electrodes' failure due to high-stress concentration upon ion storage.

Boosting sodium-ion battery performance by anion doping in NASICON Na4MnCr(PO4)3 cathode

Na superionic conductor (NASICON)-structured Na4MnCr(PO4)3 (NMCP) possessing unique three-electron transfer process renders admirable energy density for sodium ion batteries (SIBs). However, the current issues like its sluggish Na+ diffusion kinetics, deficient intrinsic conductivity, and unsatisfactory structural stability, hinder its practical application. Herein, a selective replacement of O elements in PO4 group by Cl anions in the NMCP system was developed to significantly enhance its electrochemical performance. The results affirm that the enhanced performance of Cl doped samples can be attributed to the enlargement of cell size, the creation of Na vacancies and the weakness of Na2O bond after Cl doping. The as-prepared Na3.85□0.15MnCr(PO3.95Cl0.05)3/C (NMCPC - 15/C) cathode delivers a high capacity (128.0 mAh/g at 50 mA g-1) and excellent rate performance (73.0 mAh/g at 1000 mA g-1) in contrast to NMCP/C that merely provides 105.2 mAh/g at 50 mA g-1 and reduces to 47.4 mAh/g at 1000 mA g-1. Meanwhile, NMCPC - 15/C shows a capacity retention of 60.7 % at 1000 mA g-1 after 500 cycles, while only 37.1 % for NMCP/C in the same test conditions. Moreover, the satisfactory performance and energy density of NMCPC - 15/C||hard carbon (HC) full cell confirm the potential practicality of NMCPC - 15. Therefore, chloride ions doping into NMCP has practical application prospects in the preparation of high-performance cathode materials and our work also offers new inspiration to apply anion doping strategies in promoting the performance of the other NASICON-structured cathodes for SIBs.

Dual Activation for Tuning N, S Co-Doping in Porous Carbon Sheets Toward Superior Sodium Ion Storage

Porous carbon has been widely focused to solve the problems of low coulombic efficiency (ICE) and low multiplication capacity of Sodium-ion batteries (SIBs) anodes. The superior energy storage properties of two-dimensional(2D) carbon nanosheets can be realized by modulating the structure, but be limited by the carbon sources, making it challenging to obtain 2D structures with large surface area. In this work, a new method for forming carbon materials with high N/S doping content based on combustion activation using the dual activation effect of K2SO4/KNO3 is proposed. The synthesized carbon material as an anode for SIBs has a high reversible capacity of 344.44 mAh g-1 at 0.05 A g-1. Even at the current density of 5 Ag-1, the capacity remained at 143.08 mAh g-1. And the ICE of sodium-ion in ether electrolytes is ≈2.5 times higher than that in ester electrolytes. The sodium storage mechanism of ether/ester-based electrolytes is further explored through ex-situ characterizations. The disparity in electrochemical performance can be ascribed to the discrepancy in kinetics, wherein ether-based electrolytes exhibit a higher rate of Na+ storage and shedding compared to ester-based electrolytes. This work suggests an effective way to develop doubly doped carbon anode materials for SIBs.

Recent Advances in Pristine Iron Triad Metal-Organic Framework Cathodes for Alkali Metal-Ion Batteries

Pristine iron triad metal-organic frameworks (MOFs), i.e., Fe-MOFs, Co-MOFs, Ni-MOFs, and heterometallic iron triad MOFs, are utilized as versatile and promising cathodes for alkali metal-ion batteries, owing to their distinctive structure characteristics, including modifiable and designable composition, multi-electron redox-active sites, exceptional porosity, and stable construction facilitating rapid ion diffusion. Notably, pristine iron triad MOFs cathodes have recently achieved significant milestones in electrochemical energy storage due to their exceptional electrochemical properties. Here, the recent advances in pristine iron triad MOFs cathodes for alkali metal-ion batteries are summarized. The redox reaction mechanisms and essential strategies to boost the electrochemical behaviors in associated electrochemical energy storage devices are also explored. Furthermore, insights into the future prospects related to pristine iron triad MOFs cathodes for lithium-ion, sodium-ion, and potassium-ion batteries are also delivered.

Mo-Doped Na4Fe3(PO4)2P2O7/C Composites for High-Rate and Long-Life Sodium-Ion Batteries

Na4Fe3(PO4)2P2O7/C (NFPP) is a promising cathode material for sodium-ion batteries, but its electrochemical performance is heavily impeded by its low electronic conductivity. To address this, pure-phase Mo6+-doped Na4Fe3-xMox(PO4)2P2O7/C (Mox-NFPP, x = 0, 0.05, 0.10, 0.15) with the Pn21a space group is successfully synthesized through spray drying and annealing methods. Density functional theory (DFT) calculations reveal that Mo6+ doping facilitates the transition of electrons from the valence to the conduction band, thus enhancing the intrinsic electron conductivity of Mox-NFPP. With an optimal Mo6+ doping level of x = 0.10, Mo0.10-NFPP exhibits lower charge transfer resistance, higher sodium-ion diffusion coefficients, and superior rate performance. As a result, the Mo0.10-NFPP cathode offers an initial discharge capacity of up to 123.9 mAh g-1 at 0.1 C, nearly reaching its theoretical capacity. Even at a high rate of 10 C, it delivers a high discharge capacity of 86.09 mAh g-1, maintaining 96.18% of its capacity after 500 cycles. This research presents a new and straightforward strategy to enhance the electrochemical performance of NFPP cathode materials for sodium-ion batteries.

Achieving Fast and Stable Sodium Storage in Na4Fe3(PO4)2(P2O7) via Entropy Engineering

Na4Fe3(PO4)2(P2O7) (NFPP) has been considered a promising cathode material for sodium-ion batteries (SIBs) owing to its environmental friendliness and economic viability. However, its electrochemical performance is constrained by connatural low electronic conductivity and inadequate sodium ion diffusion. Herein, a high-entropy substitution strategy is employed in NFPP to address these limitations. Ex situ X-ray diffraction analysis reveals a single-phase electrochemical reaction during the sodiation/desodiation processes and the increased configurational entropy in HE-NFPP endows an enhanced structure, which results in a minimal volume variation of only 1.83%. Kinetic analysis and density functional theory calculation further confirm that the orbital hybrid synergy of high-entropy transition metals offers a favorable electronic structure, which efficaciously boosts the charge transfer kinetics and optimizes the sodium ion diffusion channel. Based on this versatile strategy, the as-prepared high-entropy Na4Fe2.5Mn0.1Mg0.1Co0.1Ni0.1Cu0.1(PO4)2(P2O7) (HE-NFPP) cathode can deliver a prominent rate performance of 55 mAh g-1 at 10 A g-1 and an ultra-long cycling lifespan of over 18 000 cycles at 5 A g-1. When paired with a hard carbon (HC) anode, HE-NFPP//HC full cell exhibits a favorable cycling durability of 1000 cycles. This high-entropy engineering offers a feasible route to improve the electrochemical performance of NFPP and provides a blueprint for exploring high-performance SIBs.

Thermal Induced Conversion of CoFe Prussian Blue Analogs Nanocubes Wrapped by Doped Carbon Network Exhibiting Fast and Stable Potassium Ion Storage as Anode

Prussian blue analogs (PBAs) show great promise as anode materials for potassium-ion batteries (PIBs) due to their high specific capacity. However, PBAs still suffer from the drawbacks of low electronic conductivity and poor structural stability, leading to inadequate rate and cyclic performance. To address these limitations, CoFe PBA nanocubes wrapped with N/S doped carbon network (CoFe PBA@NSC) as anode for PIBs is designed by using thermal-induced in situ conversion strategy. As expected, the structural advantages of nanosized PBA cubes, such as abundant interfaces and large surface area, enable the CoFe PBA@NSC electrode to demonstrate superior rate properties (557 and 131 mAh g-1 at 0.05 and 10 A g-1) and low capacity degradation (0.093% per cycle over 1000 cycles at 0.5 A g-1). Furthermore, several ex situ characterizations revealed the K-ion storage mechanism. Fe+ and Co0 are generated during potassicization, followed by a completely reversible chemical state of iron while some cobalt monomers remained during depotassication. Additionally, the as-built potassium-ion hybrid capacitor based on CoFe PBA@NSC anode exhibits a high energy density of 118 Wh kg-1. This work presents an alternative but promising synthesis route for Prussian blue analogs, which is significant for the advancement of PIBs and other related energy storage devices.

A Comprehensive Review on Strategies for Enhancing the Performance of Polyanionic-Based Sodium-Ion Battery Cathodes

The significant consumption of fossil fuels and the increasing pollution have spurred the development of energy-storage devices like batteries. Due to their high cost and limited resources, widely used lithium-ion batteries have become unsuitable for large-scale energy production. Sodium is considered to be one of the most promising substitutes for lithium due to its wide availability and similar physiochemical properties. Designing a suitable cathode material for sodium-ion batteries is essential, as the overall electrochemical performance and the cost of battery depend on the cathode material. Among different types of cathode materials, polyanionic material has emerged as a great option due to its higher redox potential, stable crystal structure, and open three-dimensional framework. However, the poor electronic and ionic conductivity limits their applicability. This review briefly discusses the strategies to deal with the challenges of transition-metal oxides and Prussian blue analogue, recent developments in polyanionic compounds, and strategies to improve electrochemical performance of polyanionic material by nanostructuring, surface coating, morphology control, and heteroatom doping, which is expected to accelerate the future design of sodium-ion battery cathodes.

High-Entropy Configuration Strategy to Build High Performance Na-Ion Layered Oxide Cathodes Derived from Simple Techniques

Layered transition metal oxides are commonly used as the cathode materials in sodium-ion batteries due to their low cost and easy manufacturing. However, the application is hindered by poor rate performance and complex phase transitions. To address these challenges, a new seven-component high-entropy layered oxide cathode material, O3-NaNi0.25Fe0.15Mn0.3Ti0.1Sn0.05Co0.05Li0.1O2 (HEO) has been developed. The entropy stabilization effect plays a crucial role in improving the performance of electrochemical systems and the stability of structures. The HEO exhibits a specific discharge capacity of 154.1 mA h g-1 at 0.1 C and 94.5 mA h g-1 at 7 C. In-situ and ex-situ XRD results demonstrate that the HEO effectively retards complex phase transitions. This work provides a high-entropy design for the storage materials with a high energy density. Meanwhile, it eliminates industry doubts about the performance of sodium ion layered oxide cathode materials.

Exceeding Three-Electron Reactions in Polyanionic Cathode To Achieve High-Energy Density for Sodium-Ion Batteries

Activating multielectron reactions of sodium superionic conductor (NASICON)-type cathodes toward higher energy density remains imperative to boost their application feasibility. However, multisodium storage with high stability is difficult to achieve due to the sluggish reaction kinetics, irreversible phase transitions, and negative structural degradation. Herein, a kind of NASICON-type Na2.5V1.5Ti0.5(PO4)3/C (NVTP-0.5) hierarchical microsphere consisting of abundant primary nanoparticles is designed, realizing a reversible 3.2-electron reaction with high stability. The optimized NVTP-0.5 cathode demonstrates an ultrahigh discharge capacity of 192.42 mAh g-1, energy density of up to 497.3 Wh kg-1 at 20 mA g-1, and capacity retention ratio of 94.1% after 1000 cycles at 1 A g-1. Additionally, the NVTP-0.5 cathode delivers excellent tolerance to extreme temperatures while also achieving a high-energy density of 400 Wh kg-1 (based on the cathode mass) in a full-cell configuration. Systematic in situ/ex situ analysis results confirm the multisodium storage processes of NVTP-0.5 involving successive redox reactions (V2+/V3+, Ti3+/Ti4+, and V3+/V4+ redox couples) and reversible structure evolution (solid-solution and biphasic mechanisms), which contribute to the high capacity and excellent cycling stability. This work indicates that the rational regulation of components with different functions can unlock more possibilities for the development of NASICON-type cathodes.

Ion Dynamics at the Intermediate Charging State of the Sodium Vanadium Fluorophosphate Cathode

Na super ionic conductor (NASICON)-type polyanionic vanadium fluorophosphate Na3V2O2(PO4)2F (NVOPF) is a promising cathode material for high-energy sodium-ion batteries. The dynamic diffusion and exchange of sodium ions in the lattice of NVOPF are crucial for its electrochemical performance. However, standard characterizations are mostly focused on the as-synthesized material without cycling, which is different from the actual battery operation conditions. In this work, we investigated the hopping processes of sodium in NVOPF at the intermediate charging state with 23Na solid-state nuclear magnetic resonance (ssNMR) and density functional theory (DFT) calculations. Our experimental characterizations revealed six distinct sodium coordination sites in the intermediate structure and determined the exchange rates among these sites at variable temperatures. The theoretical calculations showed that these dynamic processes correspond to different ion transport pathways in the crystalline lattice. Our combined experimental and theoretical study uncovered the underlying mechanisms of the ion transport in cycled NVOPF and these understandings may help the optimization of cathode materials for sodium-ion batteries.