Stimuli-Responsive Liquid-Crystal-Infused Porous Surfaces for Manipulation of Underwater Gas Bubble Transport and Adhesion

An elastic piezoelectric nanomembrane with double noise reduction for high-quality bandpass acoustics

Polymer piezoelectrics with high electromechanical energy conversion (HEEC) are very promising for flexible acoustoelectric devices. However, reducing thickness and improving ordered polarization and ferroelectricity while maintaining high mechanical strength pose enormous fabrication challenges for polymer piezoelectric membranes-additionally, noise management in the acoustoelectric conversion remains an open issue. Here, we present a hydro-levitation superspreading approach for fabricating polymer nanomembranes with ordered crystalline phases and sub-nanostructures on the water surface. The elastic piezoelectric nanomembrane (EPN) is only 335 nanometers thick and consists of a conductance-stable piezoelectric layer sandwiched between two elastic damping layers. Such an all-in-one EPN can reduce background noise with low autocorrelation in the environment, suppress spurious noise caused by poor circuit contact, and achieve bandpass filtering of acoustic signals at human voice frequencies. This nanomembrane holds promise in repairing the auditory system of patients with tympanic membrane perforation and in a wide range of other acoustoelectric conversion fields.

Locomotion behavior of air bubbles on solid surfaces

Air bubbles are a common occurrence in both natural and industrial settings and are a significant topic in the fields of physics, chemistry, engineering, and medicine. The physical phenomena of the contact between bubbles and submerged solid surfaces, as well as the locomotion behavior of bubbles, are worth exploring. Bubbles are generated in an unbounded liquid environment and rise due to unbalanced external forces. Bubbles of different diameters follow different ascending paths, after which they approach, touch, collide, bounce, and finally adsorb to the solid surface, forming a stable three-phase contact line (TPCL). The bubbles are in an unstable state due to the unbalanced external forces on the solid surface and the effects generated by the two-phase contact surface, resulting in different locomotion behaviors on the solid surface. Studying the formation, transport, aggregation, and rupture behaviors of bubbles on solid surfaces can enable the controllable operation of bubbles. This, in turn, can effectively reduce the loss of mechanical apparatus in agro-industrial production activities and improve corresponding production efficiency. Recent research has shown that the degree of bubble wetting on a solid surface is a crucial factor in the locomotion behavior of bubbles on that surface. This has led to significant progress in the study of bubble wetting, which has in turn greatly advanced our understanding of bubble behavior. Based on this, exploring the manipulation process of the directional motion of bubbles is a promising research direction. The locomotion behavior of bubbles on solid surfaces can be controlled by changing external conditions, leading to the integration of bubble behavior in various scientific and technological fields. Studying the dynamics of bubbles in liquids with infinite boundaries is worthwhile. Additionally, the manipulation process and mode of these bubbles is a popular research direction.

Designing Plastrons for Underwater Bubble Capture: From Model Microstructures to Stochastic Nanostructures

Bubbles and foams are often removed via chemical defoamers and/or mechanical agitation. Designing surfaces that promote chemical-free and energy-passive bubble capture is desirable for numerous industrial processes, including mineral flotation, wastewater treatment, and electrolysis. When immersed, super-liquid-repellent surfaces form plastrons, which are textured solid topographies with interconnected gas domains. Plastrons exhibit the remarkable ability of capturing bubbles through coalescence. However, the two-step mechanics of plastron-induced bubble coalescence, namely, rupture (initiation and location) and subsequent absorption (propagation and drainage) are not well understood. Here, the influence of 1) topographical feature size and 2) gas fraction on bubble capture dynamics is investigated. Smaller feature sizes accelerate rupture while larger gas fractions markedly improve absorption. Rupture is initiated solely on solid domains and is more probable near the edges of solid features. Yet, rupture time becomes longer as solid fraction increases. This counterintuitive behavior represents unexpected complexities. Upon rupture, the bubble's moving liquid-solid contact line influences its absorption rate and equilibrium state. These findings show the importance of rationally minimizing surface feature sizes and contact line interactions for rapid bubble rupture and absorption. This work provides key design principles for plastron-induced bubble coalescence, inspiring future development of industrially-relevant surfaces for underwater bubble capture.

Facilitating Interskin Communication in Artificial Polymer Systems through Liquid Transfer

Chemical communication is a ubiquitous process in nature, and it has sparked interest in the development of electric-sense-based robotic perception systems with chemical components. Here, a novel liquid crystal polymer is introduced that combines the transferring, receiving, and sensing of chemical signals, providing a new principle to achieve chemical communication in robotic systems. This approach allows for the transfer of cargo between two polymer coatings, and the transfer can be monitored through an electrical signal. Additionally, cascade transfer can be achieved through this approach, as the transfer of cargo is not limited to only two coatings, but can continue from the second to a third coating. Furthermore, the two coatings can be infused with different reagents, and upon exchange, a reaction takes place to generate the desired species. The novel method of chemical communication that is developed presents a notable improvement in embodied perception. This advancement facilitates human-robot and robot-robot interactions and enhances the ability of robots to efficiently and accurately perform complex tasks in their environment.

Underwater Bubble Manipulation on Surfaces with Patterned Regions with Infused Lubricants

The flexible manipulation of underwater gas bubbles on solid substrates has attracted considerable research interest from scientists in the fields of water electrolysis, bubble microreactions, drug delivery, and heat transfer. Inspired by the oxygen-binding mechanisms of aquatic organisms, scientists have designed a series of interfacial materials for use in collecting gases, detecting and grading bubbles, and conducting microbubble reactions. Aerophilic surfaces are commonly used in underwater bubble manipulation platforms due to their excellent gas-trapping properties. However, during bubble transport, some of the bubbles are retained in the rough structure of the aerophilic surface and cause gas loss, which in the long run reduces the gas transport function. In addition, the aerophilic surface is prone to failure in high-humidity and high-pressure underwater environments. The lubricant-infused surface features an oil layer that remains stable on a rough substrate and is immiscible with water. Additionally, the bubbles are transported over the oil layer without causing losses other than those dissolved in water. These attributes make it more favorable than the aerophilic surface. Inspired by the unique properties of Nepenthes and cactus spines, we developed a patterned slippery surface [patterned lubricant-infused surface (PLIS)] through laser etching and ammonia etching that facilitates the coexistence of superaerophobic and aerophilic surfaces. The PLIS executes bubble capture utilizing a difference in wettability measuring 78°, transports bubbles through Laplace force and buoyancy, and regulates bubble release by restricting the contact area on the PLIS. The PLIS can be prepared rapidly and affordably in just about an hour, and its potential for large-scale production is high. Following tests for shear, acid and alkali resistance, and corrosion resistance, the PLIS exhibited impressive weathering resistance and appears to have potential for application in some extreme environments.

Airflow Triggered Water Film Self-Sculpturing on Femtosecond Laser-Induced Heterogeneously Wetted Micro/Nanostructured Surfaces

Liquid manipulation is essential for daily life and modern industry, and it is widely used in various fields, including seawater desalination, microfluidic robots, and biomedical engineering. Nevertheless, the current research focuses on the manipulation of individual droplets. There are a few projects for water film management. Here, we proposed a facile method of wind-triggered water film self-sculpturing based on a heterogeneous wettability surface, which is achieved by the femtosecond laser direct writing technology and femtosecond laser deposition. Under the conditions of various airflow velocities and water film thicknesses, three distinct behaviors of the water film were analyzed. As a result, when the water film thickness is lower than 4.9 mm, the self-sculpture process will occur until the whole superhydrophobic surface dewetting. Four potential applications are demonstrated, including encryption, oil containers, reconfigurable patterning, and self-splitting devices. This work provides a new approach for manipulating a water film of fluid control engineering.

Cinnamaldehyde grafted porous Aerogel-Organ gel liquid infused surface for achieving difunctional long-term dynamic antifouling

Marine biofouling caused a number of questions about energy consumption and safety. While there were still some challenges in developing an environmentally friendly, non-toxic and long-term antifouling slippery liquid-infused porous surface (SLIPS). Here, we proposed a difunctional antifouling strategy via constructing porous polydimethylsiloxane (PDMS) surface with a layer of aerogel by sol-gel method and grafted cinnamaldehyde chemically. The improvement in structure enhanced the liquid storage stability of coating, which in turn increases its anti-bioadhesive ability. In addition, the grafted cinnamaldehyde could also be used to act as a chemical antibacterial and is intelligently released in the face of harsh fouling environments, which played a key role in prolonging the antibacterial lifespan of the coating. After the 120-hour anti-bacteria experiment and the 25-day anti-algae experiment, the anti-Escherichia coli (anti-E. coli) rate and the anti-algae rate of the coating reached 99.6% and 99.9%, respectively, which was attributed to the excellent long-term antifouling properties of the coating. The combination of physical and chemical antifouling property made the coating achieve long-term fouling prevention for marine engineering equipment.

Reconfigurable scaffolds for adaptive tissue regeneration

Tissue engineering and regenerative medicine have offered promising alternatives for clinical treatment of body tissue traumas, losses, dysfunctions, or diseases, where scaffold-based strategies are particularly popular and effective. Over the decades, scaffolds for tissue regeneration have been remarkably evolving. Nevertheless, conventional scaffolds still confront grand challenges in bio-adaptions in terms of both tissue-scaffold and cell-scaffold interplays, for example complying with complicated three-dimensional (3D) shapes of biological tissues and recapitulating the ordered cell regulation effects of native cell microenvironments. Benefiting from the recent advances in "intelligent" biomaterials, reconfigurable scaffolds have been emerging, demonstrating great promise in addressing the bio-adaption challenges through altering their macro-shapes and/or micro-structures. This mini-review article presents a brief overview of the cutting-edge research on reconfigurable scaffolds, summarizing the materials for forming reconfigurable scaffolds and highlighting their applications for adaptive tissue regeneration. Finally, the challenges and prospects of reconfigurable scaffolds are also discussed, shedding light on the bright future of next-generation reconfigurable scaffolds with upgrading adaptability.

Non-Newtonian fluid gating membranes with acoustically responsive and self-protective gas transport control

Control of gas transport through porous media is desired in multifarious processes such as chemical reactions, interface absorption, and medical treatment. Liquid gating technology, based on dynamically adaptive interfaces, has been developed in recent years and has shown excellent control capability in gas manipulation-the reversible opening and closing of a liquid gate for gas transport as the applied pressure changes. Here, we report a new strategy to achieve self-protective gas transport control by regulating the dynamic porous interface in a non-Newtonian fluid gating membrane based on the shear thickening fluid. The gas transport process can be suspended and restored via modulation of the acoustic field, owing to the transition of particle-to-particle interactions in a confined geometry. Our experimental and theoretical results support the stability and tunability of the gas transport control. In addition, relying on the shear thickening behaviour of the gating fluid, the transient response can be achieved to resist high-impact pressure. This strategy could be utilized to design integrated smart materials used in complex and extreme environments such as hazardous and explosive gas transportation.

Perspiring Soft Robotics Skin Constituted by Dynamic Polarity-Switching Porous Liquid Crystal Membrane

Secretion of functional fluids is essential for affecting surface properties in ecosystems. The existing polymer membranes that mimic human skin functions are limited to secreting, either apolar or polar, liquid. However, the development of membranes that grant exchange liquid with different polarities remains a grand challenge. This process is prohibited by the mismatch of the polarity between the carrier polymer and the loaded liquid. To conquer this limitation, an innovative strategy is reported to dynamically switch the polarity of the porous membrane, thereby empowering the exchange of apolar liquid with polar liquid and vice versa. This approach incorporates a benzoic acid derivative into the original apolar polymer network. The benzoic acid dimerizes and forms hydrogen bonds, which supports the molecular alignment, but can be broken into the ionic state when subjected to alkaline treatment, changing the polarity of themembrane. Consequently, the apolar liquid can be replaced with a more polar one. This polar liquid is ejected upon safe-dose UV illumination from the membrane. Reabsorption occurs on demand by illumination of visible light or when left in contact with the membrane, spontaneously in the dark. Based on this, the consumed membrane is replenished with the same or different exchanging liquid.

Directional Transport of Underwater Bubbles on Solid Substrates: Principles and Applications

The manipulation of underwater bubbles on substrates has received extensive research interest from both the scientific community and industry, including the chemical industry, machinery, biology, medicine, and other fields. Recent advances in "smart" substrates have enabled the bubbles to be transported on demand. Herein, the progress in the directional transport of underwater bubbles on various types of substrates is summarized, including planes, wires, and cones. The transport mechanism can be classified as buoyancy-driven, Laplace-pressure-difference-driven, and external-force-driven according to the driven force of the bubble. Moreover, the wide applications of directional bubble transport are reported, ranging from gas collection, microbubble reaction, bubble detection and classification, bubble switch, and bubble microrobots. Lastly, the advantages and challenges of various directional bubble transportation methods are discussed, and the current challenges and future prospects in this field are also discussed. This Review outlines the fundamental mechanisms of underwater bubble transportation on solid substrates and helps to understand the methods of optimizing bubble transportation performances.

Fluid manipulation via multifunctional lubricant infused slippery surfaces: principle, design and applications

Water-repellent interfaces with high performance have emerged as an indispensable platform for developing advanced materials and devices. Inspired by the pitcher plant, slippery liquid-infused porous surfaces (SLIPSs) with reliable hydrophobicity have proven to possess great potential for various applications in droplet and bubble manipulation, droplet energy harvesting, condensation, fog collection, anti-icing, and anti-biofouling due to their excellent properties such as persistent surface hydrophobicity, molecular smoothness, and fluidity. This review aims to introduce the development history of interaction between SLIPSs and fluids as well as the design principles, preparation methods, and various applications of some of the more typical SLIPSs. The fluid manipulation strategies of the slippery surfaces have been proposed including the wettability pattern, oriented micro-structure, and geometric gradient. At last, the application prospects of SLIPSs in various fields and the challenges in the design and fabrication of slippery surfaces are analyzed. We envision that this review can provide an overview of the fluid manipulating processes on slippery surfaces for researchers in both academic and industrial fields.

Magnetocontrollable droplet mobility on liquid crystal-infused porous surfaces

Magnetocontrollable droplet mobility on surfaces of both solids and simple fluids have been widely used in a wide range of applications. However, little is understood about the effect of the magnetic field on the wettability and mobility of droplets on structured fluids. Here, we report the manipulation of the dynamic behaviors of water droplets on a film of thermotropic liquid crystals (LCs). We find that the static wetting behavior and static friction of water droplets on a 4'-octyl-4-biphenylcarbonitrile (8CB) film strongly depend on the LC mesophases, and that a magnetic field caused no measurable change to these properties. However, we find that the droplet dynamics can be affected by a magnetic field as it slides on a nematic 8CB film, but not on isotropic 8CB, and is dependent on both the direction and strength of the magnetic field. By measuring the dynamic friction of a droplet sliding on a nematic 8CB film, we find that a magnetic field alters the internal orientational ordering of the 8CB which in turn affects its viscosity. We support this interpretation with a scaling argument using the LC magnetic coherence length that includes (i) the elastic energy from the long-range orientational ordering of 8CB and (ii) the free energy from the interaction between 8CB and a magnetic field. Overall, these results advance our understanding of droplet mobility on LC films and enable new designs for responsive surfaces that can manipulate the mobility of water droplets.

ELECTRONIC SUPPLEMENTARY MATERIAL

Supplementary material (further details of the stability of LCIPS against water-induced dewetting, the interfacial tension and contact angle measurement using a goniometer, the estimation of the thickness of LC wrapping layer at air-water interface on droplets, SEM measurements, the average sliding velocity of a water droplet on 5CB, E7, silicone oil, and mineral oil films with and without a magnetic field, representative force diagram (F _d versus time) of a 3-µL water droplet moving at a speed of 0.1 mm/s on a nematic 8CB film, F _dynamic acting on 3 µL water droplets moving at speeds of 0.1-1 mm/s on an isotropic 8CB film, the calculated magnetic coherence length as a function of the magnitude of the magnetic field applied to the nematic LCIPS, and the apparent advancing and receding contact angles of a moving water droplet on nematic LCIPS as a function of time, and polarized light micrographs (top view) of a nematic 8CB film between two DMOAP-functionalized glass slides before and after applying a horizontal magnetic field) is available in the online version of this article at 10.1007/s12274-022-5318-y.

Magnetocontrollable droplet mobility on liquid crystal-infused porous surfaces

Magnetocontrollable droplet mobility on surfaces of both solids and simple fluids have been widely used in a wide range of applications. However, little is understood about the effect of the magnetic field on the wettability and mobility of droplets on structured fluids. Here, we report the manipulation of the dynamic behaviors of water droplets on a film of thermotropic liquid crystals (LCs). We find that the static wetting behavior and static friction of water droplets on a 4'-octyl-4-biphenylcarbonitrile (8CB) film strongly depend on the LC mesophases, and that a magnetic field caused no measurable change to these properties. However, we find that the droplet dynamics can be affected by a magnetic field as it slides on a nematic 8CB film, but not on isotropic 8CB, and is dependent on both the direction and strength of the magnetic field. By measuring the dynamic friction of a droplet sliding on a nematic 8CB film, we find that a magnetic field alters the internal orientational ordering of the 8CB which in turn affects its viscosity. We support this interpretation with a scaling argument using the LC magnetic coherence length that includes (i) the elastic energy from the long-range orientational ordering of 8CB and (ii) the free energy from the interaction between 8CB and a magnetic field. Overall, these results advance our understanding of droplet mobility on LC films and enable new designs for responsive surfaces that can manipulate the mobility of water droplets.

Electronic Supplementary Material

Supplementary material (further details of the stability of LCIPS against water-induced dewetting, the interfacial tension and contact angle measurement using a goniometer, the estimation of the thickness of LC wrapping layer at air-water interface on droplets, SEM measurements, the average sliding velocity of a water droplet on 5CB, E7, silicone oil, and mineral oil films with and without a magnetic field, representative force diagram (Fd versus time) of a 3-µL water droplet moving at a speed of 0.1 mm/s on a nematic 8CB film, Fdynamic acting on 3 µL water droplets moving at speeds of 0.1-1 mm/s on an isotropic 8CB film, the calculated magnetic coherence length as a function of the magnitude of the magnetic field applied to the nematic LCIPS, and the apparent advancing and receding contact angles of a moving water droplet on nematic LCIPS as a function of time, and polarized light micrographs (top view) of a nematic 8CB film between two DMOAP-functionalized glass slides before and after applying a horizontal magnetic field) is available in the online version of this article at 10.1007/s12274-022-5318-y.