Hydrogen-Bond-Assisted Solution Discharge in Aprotic Li-O2 Batteries

Porous crystalline conjugated macrocyclic materials and their energy storage applications

Porous crystalline conjugated macrocyclic materials (CMMs) possess high porosity, tunable structure/function and efficient charge transport ability owing to their planar macrocyclic conjugated π-electron system, which make them promising candidates for applications in energy storage. In this review, we thoroughly summarize the timely development of porous crystalline CMMs in energy storage related fields. Specifically, we summarize and discuss their structures and properties. In addition, their energy storage applications, such as lithium ion batteries, lithium sulfur batteries, sodium ion batteries, potassium ion batteries, Li-CO2 batteries, Li-O2 batteries, Zn-air batteries, supercapacitors and triboelectric nanogenerators, are also discussed. Finally, we present the existing challenges and future prospects. We hope this review will inspire the development of advanced energy storage materials based on porous crystalline CMMs.

Constructing an Interlaced Catalytic Surface via Fluorine-Doped Bimetallic Oxides for Oxygen Electrode Processes in Li-O2 Batteries

Lithium-oxygen (Li-O2) batteries, renowned for their high theoretical energy density, have garnered significant interest as prime candidates for future electric device development. However, their actual capacity is often unsatisfactory due to the passivation of active sites by solid-phase discharge products. Optimizing the growth and storage of these products is a crucial step in advancing Li-O2 batteries. Here, a fluorine-doped bimetallic cobalt-nickel oxide (CoNiO2- xFx/CC) with an interlaced catalytic surface (ICS) and a corncob-like structure is proposed as an oxygen electrode. Unlike conventional oxide electrodes with a "single adsorption catalytic mechanism," the ICS of CoNiO2- xFx/CC offers a "competitive adsorption catalytic mechanism," where oxygen sites facilitate oxygen conversion while fluorine sites contribute to the growth of Li2O2. This results in a change in Li2O2 morphology from a surface film to toroidal particles, effectively preventing the burial of active sites. Additionally, the unique open architecture aids in the capture and release of oxygen and the formation of well-contacted Li2O2/electrode interfaces, which benefits the complete decomposition of Li2O2 products. Consequently, the Li-O2 battery with a CoNiO2- xFx/CC cathode demonstrates a high specific capacity of up to 30923 mAh g-1 and a lifespan exceeding 580 cycles, surpassing most reported metal oxide-based cathodes.

Crown Ether Electrolyte Induced Li2O2 Amorphization for Low Polarization and Long Lifespan Li-O2 Batteries

Lithium-oxygen batteries possess an extremely high theoretical energy density, rendering them a prime candidate for next-generation secondary batteries. However, they still face multiple problems such as huge charge polarization and poor life, which lay a significant gap between laboratory research and commercial applications. In this work, we adopt 15-crown-5 ether (C15) as solvent to regulate the generation of discharge products in lithium-oxygen batteries. The coronal structure endows C15 with strong affinity to Li+, firmly stabilizes the intermediate LiO2 and discharge product Li2O2. Thus, the crystalline Li2O2 is amorphized into easily decomposable amorphous products. The lithium-oxygen batteries assembled with 0.5 M C15 electrolyte show an increased discharge capacity from 4.0 mAh cm-2 to 5.7 mAh cm-2 and a low charge overpotential of 0.88 V during the whole lifespan at 0.05 mA cm-2. The batteries with 1 M C15 electrolyte can cycle stably for 140 cycles. Furthermore, the amorphous characteristic of Li2O2 product is preserved when matched with redox mediators such as LiI, with the charge polarization further decreasing to 0.74 V over a cycle life of 190 cycles. This provides new possibilities for electrolyte design to promote Li2O2 amorphization and reduce charge overpotential in lithium-oxygen batteries.

A bipolar organic molecule towards the anion/cation-hosting cathode compatible with polymer electrolytes for quasi-solid-state dual-ion batteries

Ion concentration and mobility are tightly associated with the ionic conductance of polymer electrolytes in solid-state lithium batteries. However, the anions involved in the movement are irrelevant to energy generation and cause uncontrolled dendritic growth and concentration polarization. In the current study, we proposed the strategy of using a bipolar organic molecule as the anion/cation-hosting cathode to expand the active charge carriers of polymer electrolytes. As a proof-of-concept demonstration of the novel strategy, a bipolar phthalocyanine derivative (2,3,9,10,16,17,23,24-octamethoxyphthalocyaninato) Ni(II) (NiPc-(OH)8) that could successively store anions and cations was used as the cathode hosting material in quasi-solid-state dual-ion batteries (QSSDIBs). Interestingly, peripheral polyhydroxyl substituents could build a compatible interface with poly(vinylidene fluoride-hexafluoro propylene-based gel polymer electrolytes (PVDF-HFP). As expected, NiPc-(OH)8 displays a high specific capacity of 248.2 mAh/g (at 50 mA g-1) and improved cyclic stability compared with that in liquid electrolyte. This study provides a solution to the issue of anion migration and could open another way to build high-performance QSSDIBs.

Multi-functional integrated design of a copper foam-based cathode for high-performance lithium-oxygen batteries

Lithium-oxygen batteries (LOBs) with extraordinarily high energy density are some of the most captivating energy storage devices. Designing an efficient catalyst system that can minimize the energy barriers and address the oxidant intermediate and side-product issues is the major challenge regarding LOBs. Herein, we have developed a new type of integrated cathode of Cu foam-supported hierarchical nanowires decorated with highly catalytic Au nanoparticles which achieves a good combination of a gas diffusion electrode and a catalyst electrode, contributing to the synchronous multiphase transport of ions, oxygen, and electrons as well as improving the cathode reaction kinetics effectively. Benefiting from such a unique hierarchical architecture, the integrated cathode delivered superior electrochemical performance, including a high discharge capacity of up to 11.5 mA h cm-2 and a small overpotential of 0.49 V at 0.1 mA cm-2, a favorable energy efficiency of 84.3% and exceptional cycling stability with nearly 1200 h at 0.1 mA cm-2 under a fixed capacity of 0.25 mA h cm-2. Furthermore, density functional theory (DFT) calculations further reveal the intrinsic direct catalytic ability to form/decompose Li2O2 during the ORR/OER process. As a consequence, this work provides an insightful investigation on the structural engineering of catalysts and holds great potential for advanced integrated cathode design for LOBs.

Self-Catalyzed Growth of Co4N and N-Doped Carbon Nanotubes toward Bifunctional Cathode for Highly Safe and Flexible Li-Air Batteries

The practical application of high-energy density lithium-oxygen (Li-O2) batteries is severely impeded by the notorious cycling stability and safety, which mainly comes from slow kinetics of oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) at cathodes, causing inferior redox overpotentials and reactive lithium metal in flammable liquid electrolyte. Herein, a bifunctional electrode, a safe gel polymer electrolyte (GPE), and a robust lithium anode are proposed to alleviate above problems. The bifunctional electrode is composed of N-doped carbon nanotubes (N-CNTs) and Co4N by in situ chemical vapor deposition self-catalyzed growth on carbon cloth (N-CNTs@Co4N@CC). The self-supporting, binder-free N-CNTs@Co4N@CC electrode has a strong and stable three-dimensional (3D) interconnected conductive structure, which provides interconnectivity between the active sites and the electrode to promote the transfer of electrons. Furthermore, the N-CNT-intertwined Co4N ensures efficient catalytic activity. Hence, the electrode demonstrates improved electrochemical properties even under a large current density (2000 mA g-1) and long cycling operation (250 cycles). Moreover, a highly safe and flexible rechargeable cell using the 3D N-CNTs@Co4N@CC electrode, GPE, and robust lithium anode design has been explored. The open circuit voltage is stable at ∼3.0 V even after 9800 cycles, which proves the mechanical durability of the integrated GPE cell. The stable cable-type Li-air battery was demonstrated to stably drive the light-emitting diodes (LEDs), highlighting the reliability for practical use.

Mechanically Interlocked Interphase with Energy Dissipation and Fast Li-Ion Transport for High-Capacity Lithium Metal Batteries

Constructing an artificial solid electrolyte interphase (ASEI) on Li metal anodes (LMAs) is a potential strategy for addressing the dendrite issues. However, the mechanical fatigue of the ASEI caused by stress accumulation under the repeated deformation from the Li plating/stripping is not taken seriously. Herein, this work introduces a mechanically interlocked [an]daisy chain network (DC MIN) into the ASEI to stabilize the Li metal/ASEI interface by combining the functions of energy dissipation and fast Li-ion transport. The DC MIN featured by large-range molecular motions is cross-linked via efficient thiol-ene click chemistry; thus, the DC MIN has flexibility and excellent mechanical properties. As an ASEI, the crown ether units in DC MIN not only interact with the dialkylammonium of a flexible chain, forming the energy dissipation behavior but also coordinate with Li ion to support the fast Li-ion transport in DC MIN. Therefore, a stable 2800 h-symmetrical cycling (1 mA cm-2 ) and an excellent 5 C-rate (full cell with LiFePO4 ) performance are achieved by DC MIN-based ASEI. Furthermore, the 1-Ah pouch cell (LiNi0.88 Co0.09 Mn0.03 O2 cathode) with DC MIN-coated LMA exhibits improved capacity retention (88%) relative to the Control. The molecular design of DC MIN provides new insights into the optimization of an ASEI for high-energy LMAs.

New Reaction Pathway of Superoxide Disproportionation Induced by a Soluble Catalyst in Li-O2 Batteries

Aprotic Li-O2 battery has attracted considerable interest for high theoretical energy density, however the disproportionation of the intermediate of superoxide (O2 - ) during discharge and charge leads to slow reaction kinetics and large voltage hysteresis. Herein, the chemically stable ruthenium tris(bipyridine) (RB) cations are employed as a soluble catalyst to alternate the pathway of O2 - disproportionation and its kinetics in both the discharge and charge processes. RB captures O2 - dimer and promotes their intramolecular charge transfer, and it decreases the energy barrier of the disproportionation reaction from 7.70 to 0.70 kcal mol-1 . This facilitates the discharge and charge processes and simultaneously mitigates O2 - and singlet oxygen related side reactions. These endow the Li-O2 battery with reduced discharge/charge voltage gap of 0.72 V and prolonged lifespan for over 230 cycles when coupled with RuO2 catalyst. This work highlights the vital role of superoxide disproportionation for Li-O2 battery.

Orbital Coupling of PbO7 Node in Single-Crystal Metal-Organic Framework Enhances Li-O2 Battery Electrocatalysis

Optimizing the local coordination environment of metal centers in metal-organic frameworks (MOFs) is crucial yet challenging for regulating the overpotential of lithium-oxygen (Li-O2) batteries. Herein, we report the synthesis of a class of PbO7 nodes in a single crystal MOF (naphthalene-lead-MOF, known as Na-Pb-MOF) to significantly enhance the kinetics of both discharge and charge processes. Compared to the PbO6 node in the single-crystal tetramethoxy-lead-MOF (4OMe-Pb-MOF), the bond length between Pb and O in the PbO7 node of Na-Pb-MOF increases, resulting in weaker Pb 5d-O 2p orbital coupling, which optimizes the adsorption interaction toward intermediates, and thereby promotes the rate-determining steps of both the reduction of LiO2 to Li2O2 and the oxidation of LiO2 to O2 for reducing the activation energy of the overall reaction. Consequently, Li-O2 batteries based on Na-Pb-MOF electrocatalysts exhibit a low total charge-discharge overpotential of 0.52 V and an excellent cycle life of 140 cycles.

Tailoring the growth route of lithium peroxide through the rational design of a sodium-doped nickel phosphate catalyst for lithium-oxygen batteries

Tailoring the morphology and structure of Li2O2, the discharge product of lithium-oxygen batteries (LOBs), through the rational design of cathode catalysts is an efficient strategy to promote the electrochemical performance of LOBs. In this work, sodium-doped nickel phosphate nanorods (Na-NiPO NRs) grown on Ni foam (NF) were prepared by the hydrothermal method and subsequent calcination. For the Na-NiPO NRs, the electronic structure could be optimized and abundant void space among the nanorods would provide abundant transport channels. Adopted as the cathodes, the Na-NiPO NRs could facilitate the uniform growth of sea cucumber-like Li2O2 with sufficient Li2O2-electrolyte and Li2O2-catalyst interfaces, significantly promoting the charge process. Therefore, LOBs could deliver a high discharge capacity of 10365.0 mA h g-1 at 100 mA g-1. And a low potential gap of 1.16 V can be achieved at 200 mA g-1 with a capacity of 500 mA h g-1. The proposed strategy demonstrates the role of the morphology and electronic structure of the cathode catalysts in tuning the Li2O2 morphology and provides a novel approach for achieving high-performance LOBs.

Tailoring the p-Band Center of NS Pair for Accelerating High-Performance Lithium-Oxygen Battery

The local coordination environment of catalytical moieties directly determines the performance of electrochemical energy storage and conversion devices, such as Li-O₂ batteries (LOBs) cathode. However, understanding how the coordinative structure affects the performance, especially for non-metal system, is still insufficient. Herein, a strategy that introduces S-anion to tailor the electronic structure of nitrogen-carbon catalyst (SNC) is proposed to improve the LOBs performance. This study unveils that the introduced S-anion effectively manipulates the p-band center of pyridinic-N moiety, substantially reducing the battery overpotential by accelerating the generation and decomposition of intermediate products Li_1-3 O₄ . The lower adsorption energy of discharging product Li₂ O₂ on NS pair accounts for the long-term cyclic stability by exposing the high active area under operation condition. This work demonstrates an encouraging strategy to enhance LOBs performance by modulating the p-band center on non-metal active sites.

Interfacial engineered superelastic metal-organic framework aerogels with van-der-Waals barrier channels for nerve agents decomposition

Chemical warfare agents (CWAs) significantly threaten human peace and global security. Most personal protective equipment (PPE) deployed to prevent exposure to CWAs is generally devoid of self-detoxifying activity. Here we report the spatial rearrangement of metal-organic frameworks (MOFs) into superelastic lamellar-structured aerogels based on a ceramic network-assisted interfacial engineering protocol. The optimized aerogels exhibit efficient adsorption and decomposition performance against CWAs either in liquid or aerosol forms (half-life of 5.29 min, dynamic breakthrough extent of 400 L g^-1) due to the preserved MOF structure, van-der-Waals barrier channels, minimized diffusion resistance (~41% reduction), and stability over a thousand compressions. The successful construction of the attractive materials offers fascinating perspectives on the development of field-deployable, real-time detoxifying, and structurally adaptable PPE that could be served as outdoor emergency life-saving devices against CWAs threats. This work also provides a guiding toolbox for incorporating other critical adsorbents into the accessible 3D matrix with enhanced gas transport properties.

Completely Eradicating Singlet Oxygen in Li-O2 Battery via Cobalt(II)-Porphyrin Complex-Catalyzed LiOH Chemistry

Li-O₂ batteries have an extremely high theoretical specific energy; however, the large charge overpotential and highly reactive singlet oxygen (¹O₂) are two major obstacles. Porphyrin as a special kind of macrocyclic conjugated aromatic system exhibits excellent redox activity, which can be optimized by introducing a center metal atom. Herein, 5,10,15,20-tetrakis(4-aminophenyl)-porphyrin (TAPP) and 5,10,15,20-tetrakis(4-aminophenyl)-porphyrin-Co(II) (Co-TAP) are applied as effective redox mediators for Li-O₂ batteries. The synergistic effects of a center metal atom and organic ligand make Co-TAP more favorable for oxygen reduction and evolution. To understand the fundamental reaction mechanisms with or without TAPP or Co-TAP, the discharge/charge processes and the parasitic reactions have been comprehensively studied. The results reveal that TAPP affects the formation mechanism of Li₂O₂, while Co-TAP transforms the main discharge product into LiOH without adding extra water. Co-TAP-containing batteries operated via LiOH chemistry completely eradicate ¹O₂ and significantly alleviate the parasitic reactions associated with ¹O₂.

Entropy Stabilization Strategy for Enhancing the Local Structural Adaptability of Li-Rich Cathode Materials

Layered Li-rich cathode materials with high reversible energy densities are becoming prevalent. However, owing to the activation of low-potential redox couples and the progressively irreversible structural transformation caused by the local adjustment of transition-metal ions in the intra/interlayer driven by anionic redox, continuous capacity degradation, and voltage decay emerge, thus greatly reducing the energy density and increasing the difficulty of battery system management. Herein, layered Li-rich cathode materials with higher intralayer configuration entropy have more local structural diversity and higher distortion energy, resulting in superior local structural adaptability with no drastic redox couple evolution, major local structural adjustment, or obvious layered-to-spinel phase transition. Consequently, the energy retention of the entropy-stabilization-strategy-enhanced Li-rich cathode materials is almost twice that of a typical Li-rich cathode material (Li_1.20 Mn_0.54 Ni_0.13 Co_0.13 O₂ , T-LRM) after 3 months of cyclic testing. Moreover, when cycled at 1 C, the voltage degradation per cycle is less than 0.02%, that is, it results in a voltage loss of only 0.8 mV per cycle, which is excellent performance. This study paves the way for the development of Li-rich cathode materials with stabilized intralayer atomic arrangements and high local structural adaptability.

Recent Progress in Developing a LiOH-Based Reversible Nonaqueous Lithium-Air Battery

The realization of practical nonaqueous lithium-air batteries (LABs) calls for novel strategies to address their numerous theoretical and technical challenges. LiOH formation/decomposition has recently been proposed as a promising alternative route to cycling LABs via Li₂ O₂ . Herein, the progress in developing LiOH-based nonaqueous LABs is reviewed. Various catalytic systems, either soluble or solid-state, that can activate a LiOH-based electrochemistry are compared in detail, with emphasis in providing an updated understanding of the oxygen reduction and evolution reactions in nonaqueous media. We identify the key factors that can switch the cell chemistry between Li₂ O₂  and LiOH and highlight the debate around these routes, as well as rationalize potential causes for these opposing opinions. The identities of the reaction intermediates, activity of redox mediators and additives, location of reaction interfaces, causes of parasitic reactions, as well as the effect of CO₂  on the LiOH electrochemistry, all play a critical role in altering the relative rates of a series of interconnected reactions and all warrant further investigation.

A QCT View of the Interplay between Hydrogen Bonds and Aromaticity in Small CHON Derivatives

The somewhat elusive concept of aromaticity plays an undeniable role in the chemical narrative, often being considered the principal cause of the unusual properties and stability exhibited by certain π skeletons. More recently, the concept of aromaticity has also been utilised to explain the modulation of the strength of non-covalent interactions (NCIs), such as hydrogen bonding (HB), paving the way towards the in silico prediction and design of tailor-made interacting systems. In this work, we try to shed light on this area by exploiting real space techniques, such as the Quantum Theory of Atoms in Molecules (QTAIM), the Interacting Quantum Atoms (IQA) approaches along with the electron delocalisation indicators Aromatic Fluctuation (FLU) and Multicenter (MCI) indices. The QTAIM and IQA methods have been proven capable of providing an unbiased and rigorous picture of NCIs in a wide variety of scenarios, whereas the FLU and MCI descriptors have been successfully exploited in the study of diverse aromatic and antiaromatic systems. We used a collection of simple archetypal examples of aromatic, non-aromatic and antiaromatic moieties within organic molecules to examine the changes in π delocalisation and aromaticity induced by the Aromaticity and Antiaromaticity Modulated Hydrogen Bonds (AMHB). We observed fundamental differences in the behaviour of systems containing the HB acceptor within and outside the ring, e.g., a destabilisation of the rings in the former as opposed to a stabilisation of the latter upon the formation of the corresponding molecular clusters. The results of this work provide a physically sound basis to rationalise the strengthening and weakening of AMHBs with respect to suitable non-cyclic non-aromatic references. We also found significant differences in the chemical bonding scenarios of aromatic and antiaromatic systems in the formation of AMHB. Altogether, our investigation provide novel, valuable insights about the complex mutual influence between hydrogen bonds and π systems.