Organic Single-Crystal Actuators and Waveguides that Operate at Low Temperatures

Efficient Aerial Water Harvesting with Self-Sensing Dynamic Janus Crystals

Water scarcity is one of the most pressing issues of contemporary societal development that requires innovative technologies where the material not only harvests water but also plays an active role in the process. Here, we demonstrate a highly efficient optical self-sensing approach to humidity capture from the air, where both humidity-harvesting and water-transduction functionalities are imparted on slender organic crystals by partial silanization via layer-by-layer hybridization. We report that due to the integration of the harvesting of aerial moisture and the collection of the condensed water, the ensuing Janus-type crystals capture humidity with the highest-to-date water collection efficiency of 15.96 ± 0.63 g cm-2 h-1. The water-collecting elements are also capable of delivering the water by reversible and periodic elastic deformation, and their high optical transparency allows real-time monitoring of the periodic fog collection process by deformational modulation of passively or actively transduced light that outcouples at the crystal-droplet interface. The results could inspire sophisticated approaches to humidity harvesting where optically transparent crystals combine fog capture with self-sensing capabilities for continuous and optimized operation to maximize the cost-gain balance of aerial fog capture.

Cornu-Spiral-Like Organic Crystal Waveguide Providing Discriminatory Optical Pathway for Smart Organic Photonic Circuit

In the era of artificial intelligence, developing advanced and intelligent photonic circuits has become essential. In this work, the fabrication of a smart organic photonic circuit (OPC), is illustrated which utilizes a Cornu-spiral-like waveguide (CSW) to produce discriminating optical pathways in the circuit. The mechanical flexibility of Schiff base, (E)-1-(((5-iodopyridin-2-yl)imino)methyl)naphthalen-2-ol (IPyIN) facilitates the fabrication of a first-of-its-kind, two-ring-based CSW via the atomic force microscopy cantilever tip-assisted mechanophotonics approach. The photonic studies suggest that the CSW structure routes optical signals in discriminating trajectories. To capitalize on the discriminatory properties of the CSW, two linear waveguides onto both rings of the CSW are integrated to create a smart OPC. This smart OPC can selectively route optical signals either partially or fully in the circuit, depending on the pathways determined by the CSW, thus enabling the circuit to switch ON or OFF. Such intelligent photonic circuits are essential for advancing smart technologies.

Logarithmic and Archimedean organic crystalline spirals

Crystals can be found in many shapes but do not usually grow as spirals. Here we show that applying a non-uniform layer of a polymer blend onto slender centimeter-size organic crystals prestrains the crystals into hybrid dynamic elements with spiral shapes that respond reversibly to environmental variations in temperature or humidity by curling. Exposure to humidity results in partial uncurling within several seconds, whereby a logarithmic-type spiral crystal is transformed into an Archimedean one. Conical helices obtained by lateral pulling of the spirals can wind around solid objects similar to plant tendrils or lift suspended objects with a positive correlation between the actuator's elongation and the cargo mass. The morphological, kinematic, and kinetic attributes turn these hybrid materials into an attractive platform for flexible sensors and soft robots, while they also provide an approach to morph crystalline fibers in non-natural spiral habits inaccessible with the common crystallization approaches.

Flexible organic crystals with multi-stimuli-responsive CPL for broadband multicolor optical waveguides

Flexible organic crystals, capable of transmitting light and responding to various external stimuli, are emerging as a new frontier in optoelectronic materials. They hold immense potential for applications in molecular machines, sensors, displays, and intelligent devices. Here, we report on flexible organic crystals based on single-component enantiomeric organic compounds, demonstrating multi-stimuli-responsive circularly polarized light (CPL). These crystals exhibit remarkable elasticity, responsiveness to light and acid vapors, and tunable circularly polarized optical signals. Upon exposure to acid vapors, the fluorescence of the crystals shifts from initial yellow emission to green emission, attributable to the protonation-induced inhibition of excited-state intramolecular proton transfer. Under UV irradiation, the fluorescence emission undergoes a red-shift, resulting from the molecular transformation from an enol configuration to a ketone configuration. Notably, both processes are reversible and can be restored under daylight. The integration of reversible fluorescence changes under light and acid vapors stimuli, CPL signals, and flexible optical waveguides within a single crystal paves the way for the application of organic crystals as all-organic chiral functional materials.

Maneuverability and Processability of Molecular Crystals

Crystal adaptronics, a burgeoning field at the intersection of materials science and engineering, focuses on harnessing the unique properties of organic molecular crystals to achieve unprecedented levels of maneuverability and processability in various applications. Increasingly, ordered stacks of crystalline materials are being endowed with fascinating mechanical compliance changes in response to external environments. Understanding how these crystals can be manipulated and tailored for specific functions has become paramount in the pursuit of advanced materials with customizable properties. Simultaneously, the processability of organic molecular crystals plays a pivotal role in shaping their utility in real-world applications. From growth methodologies to fabrication techniques, the ability to precisely machine these crystals opens new avenues for engineering materials with enhanced functionality. These processing methods enhance the versatility of organic crystals, allowing their integration into various devices and technologies, and further expanding the potential applications. This review aims to provide a concise overview of the current landscape in the study of dynamic organic molecular crystals, with an emphasis on the interconnected themes of operability and processability.

Ultra-Wide Modulation and Reversible Reconfiguration of a Flexible Organic Crystalline Optical Waveguide Between 645 and 731 nm

Flexible organic crystalline optical waveguides, which deliver input or self-emit light through various dynamic organic crystals, have attracted increasing attention in the past decade. However, the modulation of the waveguide output relies on chemical design and substituent modification, being time-consuming and laborious. Here we report an elastic organic crystal that displays long-distance light transduction up to 2.0 cm and an ultra-wide modulation of crystalline optical waveguides between red (645 nm) and near infrared (731 nm) in both the pristine and the elastically bent states based on a pre-designed self-absorption effect. The flexible organic crystalline optical waveguides can be precisely and reversibly reconfigured by controlling the irradiation point. In addition, deep-red amplified spontaneous emission (ASE) that is able to transduce through a 5.0 mm bent crystal with an ultra-low optical loss coefficient of 0.093 dB/mm has been attained. To the best of our knowledge, this is the first report of flexible organic ASE waveguides. The present study not only provides a simple yet effective strategy to remarkably modulate flexible organic crystalline optical waveguides but also demonstrates the superiority of lasing over normal emission as flexible optical communication elements.

Trimodal operation of a robust smart organic crystal

We describe a dynamic crystalline material that integrates mechanical, thermal, and light modes of operation, with unusual robustness and resilience and a variety of both slow and fast kinematic effects that occur on very different time scales. In the mechanical mode of operation, crystals of this material are amenable to elastic deformation, and they can be reversibly morphed and even closed into a loop, sustaining strains of up to about 2.6%. Upon release of the external force, the crystals resume their original shape without any sign of damage, demonstrating outstanding elasticity. Application of torque results in plastic twisting for several rotations without damage, and the twisted crystal can still be bent elastically. The thermal mode of operation relies on switching the lattice at least several dozen times. The migration of the phase boundaries depends on the crystal habit. It can be precisely controlled by temperature, and it is accompanied by both slow and fast motions, including shear deformation and leaping. Parallel boundaries result in a thermomechanical effect, while non-parallel boundaries result in a thermosalient effect. Finally, the photochemical mode of operation is driven by isomerization and can be thermally reverted. The structure of the crystal can also be switched photochemically, and the generation of a bilayer induces rapid bending upon exposure to ultraviolet light, an effect that further diversifies the mechanical response of the material. The small structural changes, low-energy and weak intramolecular hydrogen bonds, and shear deformation, which could dissipate part of the elastic energy, are considered to be the decisive factors for the conservation of the long-range order and the extraordinary diversity in the response of this, and potentially many other dynamic crystalline materials.

Manipulating Hetero-Nanowire Films for Flexible and Multifunctional Thermoelectric Devices

Flexible thermoelectric devices hold significant promise in wearable electronics owing to their capacity for green energy generation, temperature sensing, and comfortable wear. However, the simultaneous achievement of excellent multifunctional sensing and power generation poses a challenge in these devices. Here, ordered tellurium-based hetero-nanowire films are designed for flexible and multifunctional thermoelectric devices by optimizing the Seebeck coefficient and power factor. The obtained devices can efficiently detect both object and environment temperature, thermal conductivity, heat proximity, and airflow. In addition, combining the thermoelectric units with radiative cooling materials exhibits remarkable thermal management capabilities, preventing device overheating and avoiding degradation in power generation. Impressively, this multifunctional electronics exhibits excellent resistance in extreme low earth orbit environments. The fabrication of such thermoelectric devices provides innovative insights into multimodal sensing and energy harvesting.

Highly efficient in crystallo energy transduction of light to work

Various mechanical effects have been reported with molecular materials, yet organic crystals capable of multiple dynamic effects are rare, and at present, their performance is worse than some of the common actuators. Here, we report a confluence of different mechanical effects across three polymorphs of an organic crystal that can efficiently convert light into work. Upon photodimerization, acicular crystals of polymorph I display output work densities of about 0.06-3.94 kJ m-3, comparable to ceramic piezoelectric actuators. Prismatic crystals of the same form exhibit very high work densities of about 1.5-28.5 kJ m-3, values that are comparable to thermal actuators. Moreover, while crystals of polymorph II roll under the same conditions, crystals of polymorph III are not photochemically reactive; however, they are mechanically flexible. The results demonstrate that multiple and possibly combined mechanical effects can be anticipated even for a simple organic crystal.

Elastic Organic Crystals Exhibiting Amplified Spontaneous Emission Waveguides with Standard Red Chromaticity of the Rec.2020 Gamut

The use of mechanically flexible molecular crystals as optical transuding media is demonstrated for a plethora of applications; however, the spectral peaks of optical outputs located mainly in the range of 400-600 nm are insufficient for practical telecommunication and full-color display applications. Herein, two elastically bendable organic crystals are reported that show red emission of the rec.709 gamut under 365 nm UV light irradiation yet generate rec.2020 gamut red optical waveguides and amplified spontaneous emissions when irradiated by a 355 nm laser. Capitalizing on the extended π-conjugation and donor-acceptor character, as well as mechanical elasticity, these organic crystals exhibit flexible optical waveguides with Commission Internationale de L'Eclairage (CIE) coordinates of (0.70, 0.29), nearly identical to the red chromaticity of the rec.2020 gamut required for ultrahigh-definition (UHD) displays. Notably, one of the elastic crystals functions as a soft resonance cavity, resulting in amplified spontaneous emission waveguides with CIE coordinates of (0.71, 0.29) and the standard red chromaticity of the rec.2020 gamut, both in straight and bent states. This study presents a new avenue for the development of high-purity red-emissive crystalline materials to create all-organic, lightweight, and mechanically compliant optical telecommunication and UHD display devices.

Hybrid and composite materials of organic crystals

Organic molecular crystals have historically been viewed as delicate and fragile materials. However, recent studies have revealed that many organic crystals, especially those with high aspect ratios, can display significant flexibility, elasticity, and shape adaptability. The discovery of mechanical compliance in organic crystals has recently enabled their integration with responsive polymers and other components to create novel hybrid and composite materials. These hybrids exhibit unique structure-property relationships and synergistic effects that not only combine, but occasionally also enhance the advantages of the constituent crystals and polymers. Such organic crystal composites rapidly emerge as a promising new class of materials for diverse applications in optics, electronics, sensing, soft robotics, and beyond. While specific, mostly practical challenges remain regarding scalability and manufacturability, being endowed with both structurally ordered and disordered components, the crystal-polymer composite materials set a hitherto unexplored yet very promising platform for the next-generation adaptive devices. This Perspective provides an in-depth analysis of the state-of-the-art in design strategies, dynamic properties and applications of hybrid and composite materials centered on organic crystals. It addresses the current challenges and provides a future outlook on this emerging class of multifunctional, stimuli-responsive, and mechanically robust class of materials.

Mechanism of Phase Transition in dl-Methionine: Determining Cooperative and Molecule-by-Molecule Transformations

The solid-state phase transition in dl-methionine has been extensively studied because of its atypical behavior. The transition occurs through changes in the molecular conformation and 3D packing of the molecules. Phase transitions in racemic aliphatic amino acid crystals are known to show different behaviors depending on whether conformational changes or packing changes are involved, where the former is thought to proceed through a nucleation-and-growth mechanism in a standard molecule-by-molecule picture, and the latter through a cooperative mechanism. The phase transition of dl-methionine resembles the thermodynamic, kinetic, and structural features of both categories: a conformational change and relative shifts between layers in two directions. The present paper presents molecular dynamics simulations of the phase transition to examine the underlying mechanism from two perspectives: (i) analysis of the scaling behavior of the free energy barriers involved in the phase transition and (ii) a structural inspection of the phase transition. Both methods can help to distinguish between a concerted phase change and a molecule-by-molecule or zip-like mechanism. The free energy predominantly scales with the system size, which suggests a cooperative mechanism. The structural changes draw, however, a slightly more complex picture. The conformational changes appear to occur in a molecule-by-molecule fashion, where the rotational movement is triggered by movement in the same layer. Conformational changes occur on a time scale nearly twice as long as the shifts between layers. Shifts in one direction appear to be less concerted than shifts in the perpendicular direction. We relate this to the edge-free energy involved in these shifts. We believe that the behavior observed in dl-methionine is likely applicable to phase transitions in other layered systems that interact through aliphatic chains as well.

Spatially Resolved Organic Whispering-Gallery-Mode Hetero-Microrings for High-Security Photonic Barcodes

Whispering-gallery-mode (WGM) microcavities featuring distinguishable sharp peaks in a broadband exhibit enormous advantages in the field of miniaturized photonic barcodes. However, such kind of barcodes developed hitherto are primarily based on microcavities wherein multiple gain medias were blended into a single matrix, thus resulting in the limited and indistinguishable coding elements. Here, a surface tension assisted heterogeneous assembly strategy is proposed to construct the spatially resolved WGM hetero-microrings with multiple spatial colors along its circular direction. Through precisely regulating the charge-transfer (CT) strength, full-color microrings covering the entire visible range were effectively acquired, which exhibit a series of sharp and recognizable peaks and allow for the effective construction of high-quality photonic barcodes. Notably, the spatially resolved WGM hetero-microrings with multiple coding elements were finally acquired through heterogeneous nucleation and growth controlled by the directional diffusion between the hetero-emulsion droplets, thus remarkably promoting the security strength and coding capacity of the barcodes. The results would be useful to fabricate new types of organic hierarchical hybrid WGM heterostructures for optical information recording and security labels.

Nacre-Inspired Bacterial Cellulose/Mica Nanopaper with Excellent Mechanical and Electrical Insulating Properties by Biosynthesis

The exploration of extreme environments has become necessary for understanding and changing nature. However, the development of functional materials suitable for extreme conditions is still insufficient. Herein, a kind of nacre-inspired bacterial cellulose (BC)/synthetic mica (S-Mica) nanopaper with excellent mechanical and electrical insulating properties that has excellent tolerance to extreme conditions is reported. Benefited from the nacre-inspired structure and the 3D network of BC, the nanopaper exhibits excellent mechanical properties, including high tensile strength (375 MPa), outstanding foldability, and bending fatigue resistance. In addition, S-Mica arranged in layers endows the nanopaper with remarkable dielectric strength (145.7 kV mm^-1 ) and ultralong corona resistance life. Moreover, the nanopaper is highly resistant to alternating high and low temperatures, UV light, and atomic oxygen, making it an ideal candidate for extreme environment-resistant materials.

Bioinspired soft robots based on organic polymer-crystal hybrid materials with response to temperature and humidity

The capability of stimulated response by mechanical deformation to induce motion or actuation is the foundation of lightweight organic, dynamic materials for designing light and soft robots. Various biomimetic soft robots are constructed to demonstrate the vast versatility of responses and flexibility in shape-shifting. We now report that the integration of organic molecular crystals and polymers brings about synergistic improvement in the performance of both materials as a hybrid materials class, with the polymers adding hygroresponsive and thermally responsive functionalities to the crystals. The resulting hybrid dynamic elements respond within milliseconds, which represents several orders of magnitude of improvement in the time response relative to some other type of common actuators. Combining molecular crystals with polymers brings crystals as largely overlooked materials much closer to specific applications in soft (micro)robotics and related fields.

Organic Crystals with Response to Multiple Stimuli: Mechanical Bending, Acid-Induced Bending and Heating-Induced Jumping

Multiple stimuli-responsive molecular crystals are attracting extensive attentions due to their potential as smart materials, such as molecular machines, actuators, and sensors. However, the task of giving a single crystal multiple stimuli-responsive properties remains extremely challenging. Herein, we found two polymorphs (Form O and Form R) of a Schiff base compound, which could respond to multiple stimuli (external force, acid, heat). Form O and Form R have different elastic deformability, which can be attributed to the differences in the molecular conformation, structural packing and intermolecular interactions. Moreover, both polymorphs exhibit reversible bending driven by volatile acid vapor, which we hypothesize is caused by reversible protonation reaction of imines with formic acid. In addition, jumping can be triggered by heating due to the significant anisotropic expansion. The integration of reversible bending and jumping into one single crystal expands the application scope of stimuli-responsive crystalline materials.

Electrically conductive hybrid organic crystals as flexible optical waveguides

Hybrid materials capitalize on the properties of individual materials to attain a specific combination of performance assets that is not available with the individual components alone. We describe a straightforward approach to preparation of sandwich-type hybrid dynamic materials that combine metals as electrically conductive components and polymers as bending, momentum-inducing components with flexible organic crystals as mechanically compliant and optically transducive medium. The resulting hybrid materials are conductive to both electricity and light, while they also respond to changes in temperature by deformation. Depending on the metal, their conductivity ranges from 7.9 to 21.0 S µm^‒1. The elements respond rapidly to temperature by curling or uncurling in about 0.2 s, which in one typical case corresponds to exceedingly fast deformation and recovery rates of 2187.5° s^‒1 and 1458.3° s^‒1, respectively. In cyclic operation mode, their conductivity decreases less than 1% after 10,000 thermal cycles. The mechanothermal robustness and dual functionality favors these materials as candidates for a variety of applications in organic-based optics and electronics, and expands the prospects of application of organic crystals beyond the natural limits of their dynamic performance.

Low-Dimensional Organic Crystals: From Precise Synthesis to Advanced Applications

Low-dimensional organic crystals (LOCs) have attracted increasing attention recently for their potential applications in miniaturized optoelectronics and integrated photonics. Such applications are possible owing to their tunable physicochemical properties and excellent charge/photon transport features. As a result, the precise synthesis of LOCs has been examined in terms of morphology modulation, large-area pattern arrays, and complex architectures, and this has led to a series of appealing structure-dependent properties for future optoelectronic applications. This review summarizes the recent advances in the precise synthesis of LOCs in addition to discussing their structure-property relationships in the context of optoelectronic applications. It also presents the current challenges related to organic crystals with specific structures and desired performances, and the outlook regarding their use in next-generation integrated optoelectronic applications.