Pseudo-Planar Heterojunction Organic Photovoltaics with Optimized Light Utilization for Printable Solar Windows

Solution-Processed Thin Film Transparent Photovoltaics: Present Challenges and Future Development

Electrical energy is essential for modern society to sustain economic growths. The soaring demand for the electrical energy, together with an awareness of the environmental impact of fossil fuels, has been driving a shift towards the utilization of solar energy. However, traditional solar energy solutions often require extensive spaces for a panel installation, limiting their practicality in a dense urban environment. To overcome the spatial constraint, researchers have developed transparent photovoltaics (TPV), enabling windows and facades in vehicles and buildings to generate electric energy. Current TPV advancements are focused on improving both transparency and power output to rival commercially available silicon solar panels. In this review, we first briefly introduce wavelength- and non-wavelength-selective strategies to achieve transparency. Figures of merit and theoretical limits of TPVs are discussed to comprehensively understand the status of current TPV technology. Then we highlight recent progress in different types of TPVs, with a particular focus on solution-processed thin-film photovoltaics (PVs), including colloidal quantum dot PVs, metal halide perovskite PVs and organic PVs. The applications of TPVs are also reviewed, with emphasis on agrivoltaics, smart windows and facades. Finally, current challenges and future opportunities in TPV research are pointed out.

Self-Assembled Interlayer Enables High-Performance Organic Photovoltaics with Power Conversion Efficiency Exceeding 20

Interfacial layers (ILs) are prerequisites to form the selective charge transport for high-performance organic photovoltaics (OPVs) but mostly result in considerable parasitic absorption loss. Trimming the ILs down to a mono-molecular level via the self-assembled monolayer is an effective strategy to mitigate parasitic absorption loss. However, such a strategy suffers from inferior electrical contact with low surface coverage on rough surfaces and poor producibility. To address these issues, here, the self-assembled interlayer (SAI) strategy is developed, which involves a thin layer of 2-6 nm to form a full coverage on the substrate via both covalent and van der Waals bonds by using a self-assembled molecule of 2-(9H-carbazol-9-yl) (2PACz). Via the facile spin coating without further rinsing and annealing process, it not only optimizes the electrical and optical properties of OPVs, which enables a world-record efficiency of 20.17% (19.79% certified) but also simplifies the tedious processing procedure. Moreover, the SAI strategy is especially useful in improving the absorbing selectivity for semi-transparent OPVs, which enables a record light utilization efficiency of 5.34%. This work provides an effective strategy of SAI to optimize the optical and electrical properties of OPVs for high-performance and solar window applications.

Green Printing for Scalable Organic Photovoltaic Modules by Controlling the Gradient Marangoni Flow

Despite the rapid development in the performances of organic solar cells (OSCs), high-performance OSC modules based on green printing are still limited. The severe Coffee-ring effect (CRE) is considered to be the primary reason for the nonuniform distribution of active layer films. To solve this key printing problem, the cosolvent strategy is presented to deposit the active layer films. The guest solvent Mesitylene with a higher boiling point and a lower surface tension is incorporated into the host solvent o-XY to optimize the rheological properties, such as surface tension and viscosity of the active layer solutions. And the synergistic effect of inward Marangoni flow generation and solution thickening caused by the cosolvent strategy can effectively restrain CRE, resulting in highly homogeneous large-area active layer films. In addition, the optimized crystallization and phase separation of active layer films effectively accelerate the charge transport and exciton dissociation of devices. Consequently, based on PM6:BTP-eC9 system, the device prepared with the co-solvent strategy shows the a power conversion efficiency of 17.80%. Moreover, as the effective area scales to 1 and 16.94 cm2, the recorded performances are altered to 16.71% and 14.58%. This study provides a universal pathway for the development of green-printed high-efficiency organic photovoltaics.

Correlating the Photovoltaic Performance and Stability of the All-Small-Molecule Organic Solar Cells to Their Intermixed Phases Determined by Concentration-Dependent Ultraviolet-Visible Absorption Spectroscopy

In addition to the donor-acceptor nano phases, the intermixed phase within the organic blends is crucial for the photovoltaic performance and stability of the bulk-heterojunction organic solar cells (OSCs). Here, the intermixed phase of a representative M-PhS:BTP-eC9 all-small-molecule organic solar cell was investigated by a concentration-dependent ultraviolet-visible (UV-vis) absorption spectroscopy method, where a shift of the absorption maximum wavelength was measured for the acceptor component with the increase of the acceptor concentration. The blend ratios of the acceptor to the donor in the intermixed phase, corresponding to the critical concentration for the formation of the acceptor nanophase (CAP), were determined to be 0.35, 0.20, and 0.15 for the as-cast, thermal annealing (TA), and the combined TA and solvent vapor annealing films. These results indicated that M-PhS and BTP-eC9 are kinetically well intermixed during spin coating, whereas TA and the following solvent annealing promote the crystallization of BTP-eC9 molecules out of the intermixed phase. The photovoltaic performance of the M-PhS:BTP-eC9 cells with different blend ratios was investigated. The formation of the BTP-eC9 nano phase in the blend film leads to stable VOC and fast increased JSC, which can be understood by the reduction of bimolecular charge recombination and the formation of electron transporting pathways within the photoactive layer. Similarly, the critical concentration for the formation of the donor phase was estimated to be 0.15 by measuring the stabilized VOC and increased JSC values of the cells with different donor blending ratios. More importantly, after a fast "burn-in" thermal degradation, the M-PhS:BTP-eC9 cell showed excellent thermal stability aging at 85 °C for over 1128 h, which is in good accordance with the unchanged intermixed phases measured by the UV-vis spectra of the annealed films. The current work demonstrates the feasibility of the spectroscopy method to investigate the intermixed phases for organic bulk-heterojunction solar cells and proves that all-small-molecule solar cells can be intrinsically very stable.

PC71BM as Morphology Regulator for Highly Efficient Ternary Organic Solar Cells with Bulk Heterojunction or Layer-by-Layer Configuration

The ternary strategy is one of the effective methods to regulate the morphology of the active layer in organic solar cells (OSCs). In this work, the ternary OSCs with bulk heterojunction (BHJ) or layer-by-layer (LbL) active layers are prepared by using the polymer donor PM6 and the non-fullerene acceptor L8-BO as the main system and the fullerene acceptor PC71BM as the third component. The power conversion efficiencies (PCEs) of BHJ OSCs and LbL OSCs are increased from 17.10% to 18.02% and from 17.20% to 18.20% by introducing PC71BM into the binary active layer, respectively. The in situ UV-vis absorption spectra indicate that the molecular aggregation and crystallization process can be prolonged by introducing PC71BM into the PM6:L8-BO or PM6/L8-BO active layer. The molecular orientation and molecular crystallinity in the active layer are optimized by introducing the PC71BM into the binary BHJ or LbL active layers, which can be confirmed by the experimental results of grazing incidence wide-angle X-ray scattering. This study demonstrates that the third component PC71BM can be used as a morphology regulator to regulate the morphology of BHJ or LbL active layers, thus effectively improving the performance of BHJ and LbL OSCs.

Waterproof and ultraflexible organic photovoltaics with improved interface adhesion

Ultraflexible organic photovoltaics have emerged as a potential power source for wearable electronics owing to their stretchability and lightweight nature. However, waterproofing ultraflexible organic photovoltaics without compromising mechanical flexibility and conformability remains challenging. Here, we demonstrate waterproof and ultraflexible organic photovoltaics through the in-situ growth of a hole-transporting layer to strengthen interface adhesion between the active layer and anode. Specifically, a silver electrode is deposited directly on top of the active layers, followed by thermal annealing treatment. Compared with conventional sequentially-deposited hole-transporting layers, the in-situ grown hole-transporting layer exhibits higher thermodynamic adhesion between the active layers, resulting in better waterproofness. The fabricated 3 μm-thick organic photovoltaics retain 89% and 96% of their pristine performance after immersion in water for 4 h and 300 stretching/releasing cycles at 30% strain under water, respectively. Moreover, the ultraflexible devices withstand a machine-washing test with such a thin encapsulation layer, which has never been reported. Finally, we demonstrate the universality of the strategy for achieving waterproof solar cells.

Manipulating Vertical Phase Separation Enables Pseudoplanar Heterojunction Organic Solar Cells Over 19% Efficiency via Ternary Polymerization

Controlling vertical phase separation of the active layer to enable efficient exciton dissociation and charge carrier transport is crucial to boost power conversion efficiencies (PCEs) of pseudoplanar heterojunction (PPHJ) organic solar cells (OSCs). However, how to optimize the vertical phase separation of PPHJ OSCs via molecule design is rarely reported yet. Herein, ternary polymerization strategy is employed to develop a series of polymer donors, DL1-DL4, and regulate their solubility, molecular aggregation, molecular orientation, and miscibility, thus efficiently manipulating vertical phase separation in PPHJ OSCs. Among them, DL1 not only has enhanced solubility, inhibited molecular aggregation and partial edge-on orientation to facilitate acceptor molecules, Y6, to permeate into polymer layer and increase donor/acceptor interfaces, but also sustains high crystallinity and appropriate miscibility with Y6 to acquire ordered molecular packing, thus achieving optimized vertical phase separation to well juggle exciton dissociation and charge transport in PPHJ devices. Therefore, DL1/Y6 based PPHJ OSCs gain the best exciton dissociation probability, highest charge carrier mobilities and weakest charge recombination, and thus afford an impressive PCE of 19.10%, which is the record value for terpolymer donors. It demonstrates that ternary polymerization is an efficient method to optimize vertical phase separation in PPHJ OSCs for high PCEs.

Solution Processed Semi-Transparent Organic Solar Cells Over 50% Visible Transmittance Enabled by Silver Nanowire Electrode with Sandwich Structure

Photovoltaic windows with easy installation for the power supply of household appliances have long been a desire of energy researchers. However, due to the lack of top electrodes that offer both high transparency and low sheet resistance, the development of high-transparency photovoltaic windows for indoor lighting scenarios has lagged significantly behind photovoltaic windows where privacy issues are involved. Addressing this issue, this work develops a solution-processable transparent top electrode using sandwich structure silver nanowires, realizing high transparency in semi-transparent organic solar cells. The wettability and conducting properties of the electrode are improved by a modified hole-transport layer named HP. The semi-transparent solar cell exhibits good see-through properties at a high average visible transmittance of 50.8%, with power conversion efficiency of 7.34%, and light utilization efficiency of 3.73%, which is the highest without optical modulations. Moreover, flexible devices based on the above-mentioned architecture also show excellent mechanical tolerance compared with Ag electrode counterparts, which retains 94.5% of their original efficiency after 1500 bending cycles. This work provides a valuable approach for fabricating solution-processed high transparency organic solar cells, which is essential in future applications in building integrated photovoltaics.

Long-Range Charge Separation Enabled by Intramoiety Delocalized Excitations in Copolymer Donors in Organic Photovoltaic Blends

For over two decades, most high-performance organic photovoltaics (OPVs) have been made with donor:acceptor bulk heterojunctions with domain sizes limited by exciton diffusion, where charge separation mostly takes place through the dissociation of the interfacial charge-transfer (xCT) excitons. Recently, nonfullerene acceptor (NFA)-based OPVs have shown excellent compatibility to device structures with large domains in active layers. However, it remains elusive how the excitations that are distant from the interfaces are converted into free charges. Here, we report the identification of a new charge separation channel in model copolymer/NFA blends mediated by intra-moiety delocalized excitations in both planar heterojunctions and donor-enriched bulk heterojunctions. The delocalized excitations induced by interchromophore electronic interactions in copolymer donors mediate the long-range charge separation and dissociate into free charges without forming the bound xCT states first, releasing the constraints associated with the short exciton diffusion length in organic materials. The long-range charge separation mechanism uncovered in this work, in cooperation with the short-range xCT-mediated pathway, holds the potential to further optimize OPVs with diverse device structures.

Niobium-Carbide MXene Modified Hybrid Hole Transport Layer Enabling High-Performance Organic Solar Cells Over 19

Niobium-carbide (Nb₂ C) MXene as a new 2D material has shown great potential for application in photovoltaics due to its excellent electrical conductivity, large surface area, and superior transmittance. In this work, a novel solution-processable poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) (PEDOT:PSS)-Nb₂ C hybrid hole transport layer (HTL) is developed to enhance the device performance of organic solar cells (OSCs). By optimizing the doping ratio of Nb₂ C MXene in PEDOT:PSS, the best power convention efficiency (PCE) of 19.33% can be achieved for OSCs based on the ternary active layer of PM6:BTP-eC9:L8-BO, which is so far the highest value among those of single junction OSCs using 2D materials. It is found that the addition of Nb₂ C MXene can facilitate the phase separation of the PEDOT and PSS segments, thus improving the conductivity and work function of PEDOT:PSS. The significantly enhanced device performance can be attributed to the higher hole mobility and charge extraction capability, as well as lower interface recombination probabilities generated by the hybrid HTL. Additionally, the versatility of the hybrid HTL to improve the performance of OSCs based on different nonfullerene acceptors is demonstrated. These results indicate the promising potential of Nb₂ C MXene in the development of high-performance OSCs.

Balancing the Selective Absorption and Photon-to-Electron Conversion for Semitransparent Organic Photovoltaics with 5.0% Light-Utilization Efficiency

Efficiently converting invisible light while allowing full visible light transmission is key to achieving high-performance semitransparent organic photovoltaics (ST-OPVs). Here, a detailed balance strategy is explored to optimize the ST-OPV via taking both absorption and carrier dynamics into consideration. Based on this principle, comprehensive optimizations are carried out, including a ternary strategy, donor:acceptor blend ratio, thickness, antireflection, etc., to compromise the invisible energy conversion and visible transmission for high-performance ST-OPVs. As a result, the opaque OPV device exhibits a champion power conversion efficiency of 19.35% (certificated 19.07%), and most strikingly, the best ST-OPV shows a remarkably high light-utilization efficiency of 5.0%, where the efficiency and the average visible transmission are 12.95% and 38.67%, respectively. An efficiency of 12.09% is achieved on the upscaled device with an area of 1.05 cm² , demonstrating its promise for large-area fabrication. These results are among the best values for ST-OPVs. Besides, it is demonstrated that the ST-OPV exhibits good infrared light-reflection capability for thermal control. This work provides a rational design of balancing the absorbing selectivity and photon-to-electron conversion for high-performance ST-OPVs, and may pave the way toward the practical application of solar windows.