1
|
Huang S, Qiu Z, Zhong J, Wu S, Han X, Hu W, Han Z, Cheng WN, Luo Y, Meng Y, Hu Z, Zhou X, Guo S, Zhu J, Zhao X, Li CC. High-Entropy Transition Metal Phosphorus Trichalcogenides for Rapid Sodium Ion Diffusion. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2024:e2405170. [PMID: 38838950 DOI: 10.1002/adma.202405170] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/10/2024] [Revised: 06/03/2024] [Indexed: 06/07/2024]
Abstract
High-entropy strategies are regarded as a powerful means to enhance performance in energy storage fields. The improved properties are invariably ascribed to entropy stabilization or synergistic cocktail effect. Therefore, the manifested properties in such multicomponent materials are usually unpredictable. Elucidating the precise correlations between atomic structures and properties remains a challenge in high-entropy materials (HEMs). Herein, atomic-resolution scanning transmission electron microscopy annular dark field (STEM-ADF) imaging and four dimensions (4D)-STEM are combined to directly visualize atomic-scale structural and electric information in high-entropy FeMnNiVZnPS3. Aperiodic stacking is found in FeMnNiVZnPS3 accompanied by high-density strain soliton boundaries (SSBs). Theoretical calculation suggests that the formation of such structures is attributed to the imbalanced stress of distinct metal-sulfur bonds in FeMnNiVZnPS3. Interestingly, the electric field concentrates along the two sides of SSBs and gradually diminishes toward the two-dimensional (2D) plane to generate a unique electric field gradient, strongly promoting the ion-diffusion rate. Accordingly, high-entropy FeMnNiVZnPS3 demonstrates superior ion-diffusion coefficients of 10-9.7-10-8.3 cm2 s-1 and high-rate performance (311.5 mAh g-1 at 30 A g-1). This work provides an alternative way for the atomic-scale understanding and design of sophisticated HEMs, paving the way for property engineering in multi-component materials.
Collapse
Affiliation(s)
- Song Huang
- Guangdong Provincial Key Laboratory of Plant Resources Biorefinery, School of Chemical Engineering and Light Industry, Guangdong University of Technology, Guangzhou, 510006, China
| | - Zanlin Qiu
- School of Materials Science and Engineering, Peking University, Beijing, 100871, China
| | - Jiang Zhong
- State Key Laboratory for Chemo/Biosensing and Chemometrics, College of Chemistry and Chemical Engineering, Hunan Key Laboratory of Two-Dimensional Materials, Hunan University, Changsha, 410082, China
| | - Shengqiang Wu
- School of Materials Science and Engineering, Peking University, Beijing, 100871, China
| | - Xiaocang Han
- School of Materials Science and Engineering, Peking University, Beijing, 100871, China
| | - Wenchao Hu
- School of Materials Science and Engineering, Peking University, Beijing, 100871, China
| | - Ziyi Han
- Tianjin Key Laboratory of Molecular Optoelectronic Sciences, Department of Chemistry, School of Science, Tianjin University, Tianjin, 300072, China
| | - Wing Ni Cheng
- School of Materials Science and Engineering, Peking University, Beijing, 100871, China
| | - Yan Luo
- School of Materials Science and Engineering, Peking University, Beijing, 100871, China
| | - Yuan Meng
- School of Materials Science and Engineering, Peking University, Beijing, 100871, China
| | - Zuyang Hu
- Guangdong Provincial Key Laboratory of Plant Resources Biorefinery, School of Chemical Engineering and Light Industry, Guangdong University of Technology, Guangzhou, 510006, China
| | - Xuan Zhou
- Guangdong Provincial Key Laboratory of Plant Resources Biorefinery, School of Chemical Engineering and Light Industry, Guangdong University of Technology, Guangzhou, 510006, China
| | - Shaojun Guo
- School of Materials Science and Engineering, Peking University, Beijing, 100871, China
| | - Jian Zhu
- State Key Laboratory for Chemo/Biosensing and Chemometrics, College of Chemistry and Chemical Engineering, Hunan Key Laboratory of Two-Dimensional Materials, Hunan University, Changsha, 410082, China
| | - Xiaoxu Zhao
- School of Materials Science and Engineering, Peking University, Beijing, 100871, China
| | - Cheng Chao Li
- Guangdong Provincial Key Laboratory of Plant Resources Biorefinery, School of Chemical Engineering and Light Industry, Guangdong University of Technology, Guangzhou, 510006, China
| |
Collapse
|
2
|
Chen Y, Yin J, Zhang Y, Lyu F, Qin B, Zhou J, Liu JH, Long YC, Mao Z, Miao M, Cai X, Fan J, Lu J. Coupling High Hardness and Zn Affinity in Amorphous-Crystalline Diamond for Stable Zn Metal Anodes. ACS NANO 2024; 18:14403-14413. [PMID: 38775684 DOI: 10.1021/acsnano.4c01054] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/05/2024]
Abstract
The highly reversible plating/stripping of Zn is plagued by dendrite growth and side reactions on metallic Zn anodes, retarding the commercial application of aqueous Zn-ion batteries. Herein, a distinctive nano dual-phase diamond (NDPD) comprised of an amorphous-crystalline heterostructure is developed to regulate Zn deposition and mechanically block dendrite growth. The rich amorphous-crystalline heterointerfaces in the NDPD endow modified Zn anodes with enhanced Zn affinity and result in homogeneous nucleation. In addition, the unparalleled hardness of the NDPD effectively overcomes the high growth stress of dendrites and mechanically impedes their proliferation. Moreover, the hydrophobic surfaces of the NDPD facilitate the desolvation of hydrate Zn2+ and prevent water-mediated side reactions. Consequently, the Zn@NDPD presents an ultrastable lifespan exceeding 3200 h at 5 mA cm-2 and 1 mAh cm-2. The practical application potential of Zn@NDPD is further demonstrated in full cells. This work exhibits the great significance of a chemical-mechanical synergistic anode modification strategy in constructing high-performance aqueous Zn-ion batteries.
Collapse
Affiliation(s)
- Yuhan Chen
- CityU-Shenzhen Futian Research Institute, Shenzhen 518045, China
- Department of Mechanical Engineering, City University of Hong Kong, 83 Tat Chee Avenue, Kowloon, Hong Kong SAR 999077, China
- Centre for Advanced Structural Materials, City University of Hong Kong Shenzhen Research Institute, Greater Bay Joint Division, Shenyang National Laboratory for Materials Science, Shenzhen 518057, China
| | - Jianan Yin
- CityU-Shenzhen Futian Research Institute, Shenzhen 518045, China
- Department of Mechanical Engineering, City University of Hong Kong, 83 Tat Chee Avenue, Kowloon, Hong Kong SAR 999077, China
- Centre for Advanced Structural Materials, City University of Hong Kong Shenzhen Research Institute, Greater Bay Joint Division, Shenyang National Laboratory for Materials Science, Shenzhen 518057, China
| | - Yaqin Zhang
- Department of Materials Science and Engineering, City University of Hong Kong, 83 Tat Chee Avenue, Kowloon, Hong Kong SAR 999077, China
| | - Fucong Lyu
- CityU-Shenzhen Futian Research Institute, Shenzhen 518045, China
- Department of Mechanical Engineering, City University of Hong Kong, 83 Tat Chee Avenue, Kowloon, Hong Kong SAR 999077, China
- Centre for Advanced Structural Materials, City University of Hong Kong Shenzhen Research Institute, Greater Bay Joint Division, Shenyang National Laboratory for Materials Science, Shenzhen 518057, China
| | - Bin Qin
- Key Laboratory of Magnetic Molecules and Magnetic Information Materials of Ministry of Education & School of Chemistry and Materials Science, Shanxi Normal University, 339 Taiyu Road, Taiyuan 030031, China
| | - Jingwen Zhou
- Department of Chemistry, City University of Hong Kong, 83 Tat Chee Avenue, Kowloon, Hong Kong SAR 999077, China
| | - Jia-Hua Liu
- Department of Materials Science and Engineering, City University of Hong Kong, 83 Tat Chee Avenue, Kowloon, Hong Kong SAR 999077, China
| | - Yun-Chen Long
- Department of Materials Science and Engineering, City University of Hong Kong, 83 Tat Chee Avenue, Kowloon, Hong Kong SAR 999077, China
| | - Zhengyi Mao
- CityU-Shenzhen Futian Research Institute, Shenzhen 518045, China
- Department of Mechanical Engineering, City University of Hong Kong, 83 Tat Chee Avenue, Kowloon, Hong Kong SAR 999077, China
- Centre for Advanced Structural Materials, City University of Hong Kong Shenzhen Research Institute, Greater Bay Joint Division, Shenyang National Laboratory for Materials Science, Shenzhen 518057, China
| | - Mulin Miao
- Department of Mechanical Engineering, City University of Hong Kong, 83 Tat Chee Avenue, Kowloon, Hong Kong SAR 999077, China
- Centre for Advanced Structural Materials, City University of Hong Kong Shenzhen Research Institute, Greater Bay Joint Division, Shenyang National Laboratory for Materials Science, Shenzhen 518057, China
- Department of Materials Science and Engineering, City University of Hong Kong, 83 Tat Chee Avenue, Kowloon, Hong Kong SAR 999077, China
| | - Xiaoqiang Cai
- School of Mechanical Engineering and Automation, Fuzhou University, No. 2 Wulongjiang North Avenue, Fuzhou City 350000, Fujian Province, China
| | - Jun Fan
- Department of Materials Science and Engineering, City University of Hong Kong, 83 Tat Chee Avenue, Kowloon, Hong Kong SAR 999077, China
| | - Jian Lu
- CityU-Shenzhen Futian Research Institute, Shenzhen 518045, China
- Department of Mechanical Engineering, City University of Hong Kong, 83 Tat Chee Avenue, Kowloon, Hong Kong SAR 999077, China
- Centre for Advanced Structural Materials, City University of Hong Kong Shenzhen Research Institute, Greater Bay Joint Division, Shenyang National Laboratory for Materials Science, Shenzhen 518057, China
| |
Collapse
|
3
|
Guo C, Huang X, Huang J, Tian X, Chen Y, Feng W, Zhou J, Li Q, Chen Y, Li SL, Lan YQ. Zigzag Hopping Site Embedded Covalent Organic Frameworks Coating for Zn Anode. Angew Chem Int Ed Engl 2024; 63:e202403918. [PMID: 38519423 DOI: 10.1002/anie.202403918] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/25/2024] [Revised: 03/17/2024] [Accepted: 03/22/2024] [Indexed: 03/24/2024]
Abstract
Precise design and tuning of Zn hopping/transfer sites with deeper understanding of the dendrite-formation mechanism is vital in artificial anode protective coating for aqueous Zn-ion batteries (AZIBs). Here, we probe into the role of anode-coating interfaces by designing a series of anhydride-based covalent organic frameworks (i.e., PI-DP-COF and PI-DT-COF) with specifically designed zigzag hopping sites and zincophilic anhydride groups that can serve as desired platforms to investigate the related Zn2+ hopping/transfer behaviours as well as the interfacial interaction. Combining theoretical calculations with experiments, the ABC stacking models of these COFs endow the structures with specific zigzag sites along the 1D channel that can accelerate Zn2+ transfer kinetics, lower surface-energy, homogenize ion-distribution or electric-filed. Attributed to these superiorities, thus-obtained optimal PI-DT-COF cells offer excellent cycling lifespan in both symmetric-cell (2000 cycles at 60 mA cm-2) and full-cell (1600 cycles at 2 A g-1), outperforming almost all the reported porous crystalline materials.
Collapse
Affiliation(s)
- Can Guo
- School of Chemistry, South China Normal University, 510006, Guangzhou, P. R. China
| | - Xin Huang
- School of Chemistry and Materials Science, Nanjing Normal University, South China Normal University, 210023, Nanjing, P. R. China
| | - Jianlin Huang
- School of Chemistry, South China Normal University, 510006, Guangzhou, P. R. China
| | - Xi Tian
- School of Chemistry and Materials Science, Nanjing Normal University, South China Normal University, 210023, Nanjing, P. R. China
| | - Yuting Chen
- School of Chemistry, South China Normal University, 510006, Guangzhou, P. R. China
| | - Wenhai Feng
- School of Chemistry, South China Normal University, 510006, Guangzhou, P. R. China
| | - Jie Zhou
- School of Chemistry, South China Normal University, 510006, Guangzhou, P. R. China
| | - Qi Li
- School of Chemistry and Materials Science, Nanjing Normal University, South China Normal University, 210023, Nanjing, P. R. China
| | - Yifa Chen
- School of Chemistry, South China Normal University, 510006, Guangzhou, P. R. China
| | - Shun-Li Li
- School of Chemistry, South China Normal University, 510006, Guangzhou, P. R. China
| | - Ya-Qian Lan
- School of Chemistry, South China Normal University, 510006, Guangzhou, P. R. China
| |
Collapse
|
4
|
Tang L, Peng H, Kang J, Chen H, Zhang M, Liu Y, Kim DH, Liu Y, Lin Z. Zn-based batteries for sustainable energy storage: strategies and mechanisms. Chem Soc Rev 2024; 53:4877-4925. [PMID: 38595056 DOI: 10.1039/d3cs00295k] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 04/11/2024]
Abstract
Batteries play a pivotal role in various electrochemical energy storage systems, functioning as essential components to enhance energy utilization efficiency and expedite the realization of energy and environmental sustainability. Zn-based batteries have attracted increasing attention as a promising alternative to lithium-ion batteries owing to their cost effectiveness, enhanced intrinsic safety, and favorable electrochemical performance. In this context, substantial endeavors have been dedicated to crafting and advancing high-performance Zn-based batteries. However, some challenges, including limited discharging capacity, low operating voltage, low energy density, short cycle life, and complicated energy storage mechanism, need to be addressed in order to render large-scale practical applications. In this review, we comprehensively present recent advances in designing high-performance Zn-based batteries and in elucidating energy storage mechanisms. First, various redox mechanisms in Zn-based batteries are systematically summarized, including insertion-type, conversion-type, coordination-type, and catalysis-type mechanisms. Subsequently, the design strategies aiming at enhancing the electrochemical performance of Zn-based batteries are underscored, focusing on several aspects, including output voltage, capacity, energy density, and cycle life. Finally, challenges and future prospects of Zn-based batteries are discussed.
Collapse
Affiliation(s)
- Lei Tang
- Department of Chemical and Biomolecular Engineering, National University of Singapore, 4 Engineering Drive 4, Singapore, 117585, Singapore.
| | - Haojia Peng
- Department of Chemical and Biomolecular Engineering, National University of Singapore, 4 Engineering Drive 4, Singapore, 117585, Singapore.
| | - Jiarui Kang
- Department of Chemical and Biomolecular Engineering, National University of Singapore, 4 Engineering Drive 4, Singapore, 117585, Singapore.
| | - Han Chen
- Department of Chemical and Biomolecular Engineering, National University of Singapore, 4 Engineering Drive 4, Singapore, 117585, Singapore.
| | - Mingyue Zhang
- Department of Chemical and Biomolecular Engineering, National University of Singapore, 4 Engineering Drive 4, Singapore, 117585, Singapore.
| | - Yan Liu
- Institute of Sustainability for Chemicals, Energy and Environment (ISCE2), Agency for Science, Technology and Research (A*STAR), 1 Pesek Road, Jurong Island, Singapore 627833, Republic of Singapore
| | - Dong Ha Kim
- Department of Chemistry and Nano Science, Ewha Womans University, 52 Ewhayeodae-gil, Seodaemun-gu, Seoul 03760, Republic of Korea.
| | - Yijiang Liu
- College of Chemistry, Key Lab of Environment-Friendly Chemistry and Application in Ministry of Education, Xiangtan University, Xiangtan 411105, Hunan Province, P. R. China.
| | - Zhiqun Lin
- Department of Chemical and Biomolecular Engineering, National University of Singapore, 4 Engineering Drive 4, Singapore, 117585, Singapore.
- Department of Chemistry and Nano Science, Ewha Womans University, 52 Ewhayeodae-gil, Seodaemun-gu, Seoul 03760, Republic of Korea.
| |
Collapse
|
5
|
Zhang M, Meng X, Wu X, Yang L, Long H, Wang C, Xie T, Wu X, Wu X. Polycarbonyl polymer with zincophilic sites as protective coating for highly reversible zinc metal anodes. J Colloid Interface Sci 2024; 662:738-747. [PMID: 38377693 DOI: 10.1016/j.jcis.2024.02.122] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/08/2023] [Revised: 02/12/2024] [Accepted: 02/14/2024] [Indexed: 02/22/2024]
Abstract
The Zn anode of aqueous zinc ion batteries (AZIBs) have suffered from a series of rampant side reactions such as dendrite growth and corrosion, which seriously affect the reversibility and stability of Zn anodes. Herein, a polycarbonyl polymer poly(1,4,5,8-naphthalene tetracarboxylic anhydride anthraquinone) imine (PNAQI) as the protective coating is synthesized through a simple solvothermal method with the raw materials of the equimolar 1,4,5,8-naphthalenetetracarboxylic dianhydride (NTCDA) and 2, 6-aminoanthraquinone (2,6-DAAQ). A series of characterizations such as contact angle measurement and ex-situ XRD analysis confirm that it can effectively prevent some side reactions. Moreover, CO on PNAQI can regulate the uniform distribution of zinc, thereby preventing the occurrence of zinc dendrites. Finally, the PNAQI@Zn//PNAQI@Zn symmetrical cell demonstrates a long cycle life exceeding 1000 h at current density of 1.0 mA cm-2 and a capacity of 1.0 mAh cm-2. The result significantly outperforms the cycling performance of the cell with bare zinc anode. Especially, the full battery of PNAQI@Zn//NH4V4O10 demonstrates an excellent capacity retention and prolonged cycle life (96.9 mAh/g after 1000 cycles at 1.0 A/g) compared to Zn//NH4V4O10. This work provides an effective, simple and low-cost solution for developing high-performance AZIBs.
Collapse
Affiliation(s)
- Mengfan Zhang
- School of Chemistry and Chemistry Engineering, Jishou University, Jishou 416000, PR China
| | - Xuemei Meng
- School of Chemistry and Chemistry Engineering, Jishou University, Jishou 416000, PR China
| | - Xiuting Wu
- School of Chemistry and Chemistry Engineering, Jishou University, Jishou 416000, PR China
| | - Lingzhuo Yang
- School of Chemistry and Chemistry Engineering, Jishou University, Jishou 416000, PR China
| | - Huan Long
- School of Chemistry and Chemistry Engineering, Jishou University, Jishou 416000, PR China
| | - Chuang Wang
- School of Chemistry and Chemistry Engineering, Jishou University, Jishou 416000, PR China
| | - Tao Xie
- School of Chemistry and Chemistry Engineering, Jishou University, Jishou 416000, PR China
| | - Xianming Wu
- School of Chemistry and Chemistry Engineering, Jishou University, Jishou 416000, PR China.
| | - Xianwen Wu
- School of Chemistry and Chemistry Engineering, Jishou University, Jishou 416000, PR China; National Demonstration Center for Experimental Chemistry Education, Jishou University, Jishou 416000, PR China.
| |
Collapse
|
6
|
Fang M, Yang T, Sheng O, Shen T, Huang Z, Zheng R, Zhang C, Zhang J, Zhang X. A trinity strategy enabled by iodine-loaded nitrogen-boron-doped carbon protective layer for dendrite-free zinc-ion batteries. J Colloid Interface Sci 2024; 661:987-999. [PMID: 38330670 DOI: 10.1016/j.jcis.2024.02.053] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/04/2024] [Revised: 01/28/2024] [Accepted: 02/05/2024] [Indexed: 02/10/2024]
Abstract
Although aqueous zinc ion batteries (AZIBs) have the merits of environmental friendliness, high safety and theoretical capacity, the slow kinetics associated with zinc deposition and unavoidable interfacial corrosion have seriously affected the commercialization of aqueous zinc ion batteries. In this work, an ingenious "trinity" design is proposed by applying a porous hydrophilic carbon-loaded iodine coating to the zinc metal surface (INBC@Zn), which simultaneously acts as an artificial protective layer, electrolyte additive and anode curvature regulator, so as to reduce the nucleation overpotential of Zn and promote the preferential deposition of (002) planes to some extent. With this synergistic effect, INBC@Zn exhibits high reversibility and strong side reaction inhibition. As a result, INBC@Zn shows high symmetric cycling stability up to 4500 h at 1 mA cm-2. An ultra-long cycle stability of 1500 cycles with high Coulombic efficiency (99.8 %) is achieved in the asymmetric cell. In addition, the INBC@Zn//NVO full cells exhibit impressive capacity retention (96 % after 1000 cycles at 3 A/g). Importantly, the designed pouch cell demonstrates stable performance and shows certain prospects for application. This work provides a facile and instructive approach toward the development of high-performance AZIBs.
Collapse
Affiliation(s)
- Miaojie Fang
- Institute of Advanced Magnetic Materials, College of Materials and Environmental Engineering, Hangzhou Dianzi University, Hangzhou 310012, China
| | - Tao Yang
- Institute of Advanced Magnetic Materials, College of Materials and Environmental Engineering, Hangzhou Dianzi University, Hangzhou 310012, China.
| | - Ouwei Sheng
- Institute of Advanced Magnetic Materials, College of Materials and Environmental Engineering, Hangzhou Dianzi University, Hangzhou 310012, China
| | - Tianyu Shen
- Institute of Advanced Magnetic Materials, College of Materials and Environmental Engineering, Hangzhou Dianzi University, Hangzhou 310012, China
| | - Zihan Huang
- Institute of Advanced Magnetic Materials, College of Materials and Environmental Engineering, Hangzhou Dianzi University, Hangzhou 310012, China
| | - Rongkun Zheng
- School of Physics, The University of Sydney, Camperdown, New South Wales 2006, Australia
| | - Chaofeng Zhang
- Institutes of Physical Science and Information Technology, Leibniz International Joint Research Center of Materials Sciences of Anhui Province, Anhui Province Key Laboratory of Environment-Friendly Polymer Materials, Key Laboratory of Structure and Functional Regulation of Hybrid Material (Ministry of Education), Anhui University, Hefei 230601, China
| | - Jian Zhang
- Institute of Advanced Magnetic Materials, College of Materials and Environmental Engineering, Hangzhou Dianzi University, Hangzhou 310012, China.
| | - Xuefeng Zhang
- Institute of Advanced Magnetic Materials, College of Materials and Environmental Engineering, Hangzhou Dianzi University, Hangzhou 310012, China
| |
Collapse
|
7
|
Tian X, Zhao Q, Zhou M, Huang X, Sun Y, Duan X, Zhang L, Li H, Su D, Jia B, Ma T. Synergy of Dendrites-Impeded Atomic Clusters Dissociation and Side Reactions Suppressed Inert Interface Protection for Ultrastable Zn Anode. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2024; 36:e2400237. [PMID: 38321816 DOI: 10.1002/adma.202400237] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/05/2024] [Indexed: 02/08/2024]
Abstract
The sluggish ions-transfer and inhomogeneous ions-nucleation induce the formation of randomly oriented dendrites on Zn anode, while the chemical instability at anode-electrolyte interface triggers detrimental side reactions. Herein, this report in situ designs a multifunctional hybrid interphase of Bi/Bi2O3, for the first time resulting in a novel synergistic regulation mechanism involving: (i) chemically inert interface protection mechanism suppresses side reactions; and more fantastically, (ii) innovative thermodynamically favorable Zn atomic clusters dissociation mechanism impedes dendrites formation. Assisted by collaborative modulation behavior, the Zn@Bi/Bi2O3 symmetry cell delivers an ultrahigh cumulative plating capacity of 1.88 Ah cm-2 at 5 mA cm-2 and ultralong lifetimes of 300 h even at high current density and depth of discharge (10 mA cm-2, DODZn: 60%). Furthermore, under a low electrolyte-to-capacity ratio (E/C: 45 µL mAh-1) and negative-to-positive capacity ratio (N/P: 6.3), Zn@Bi/Bi2O3||MnO2 full-cell exhibits a superior capacity retention of 86.7% after 500 cycles at 1 A g-1, which outperforms most existing interphases. The scaled-up Zn@Bi/Bi2O3||MnO2 battery module (6 V, 1 Ah), combined with the photovoltaic panel, presents excellent renewable-energy storage ability and long output lifetime (12 h). This work provides a fantastic synergistic mechanism to achieve the ultrastable Zn anode and can be greatly promised to apply it into other metal-based batteries.
Collapse
Affiliation(s)
- Xiaomeng Tian
- Key Laboratory for Green Synthesis and Preparative Chemistry of Advanced Materials of Liaoning Province, Institute of Clean Energy Chemistry, College of Chemistry, Liaoning University, Shenyang, 110036, China
- School of Science, RMIT University, Melbourne, VIC, 3000, Australia
| | - Qin Zhao
- Key Laboratory for Green Synthesis and Preparative Chemistry of Advanced Materials of Liaoning Province, Institute of Clean Energy Chemistry, College of Chemistry, Liaoning University, Shenyang, 110036, China
| | - Mengmeng Zhou
- Key Laboratory for Green Synthesis and Preparative Chemistry of Advanced Materials of Liaoning Province, Institute of Clean Energy Chemistry, College of Chemistry, Liaoning University, Shenyang, 110036, China
| | - Xinjun Huang
- Key Laboratory for Green Synthesis and Preparative Chemistry of Advanced Materials of Liaoning Province, Institute of Clean Energy Chemistry, College of Chemistry, Liaoning University, Shenyang, 110036, China
| | - Ying Sun
- Key Laboratory for Green Synthesis and Preparative Chemistry of Advanced Materials of Liaoning Province, Institute of Clean Energy Chemistry, College of Chemistry, Liaoning University, Shenyang, 110036, China
| | - Xiaoguang Duan
- School of Chemical Engineering, The University of Adelaide, Adelaide, SA, 5005, Australia
| | - Lei Zhang
- School of Chemistry and Chemical Engineering, Guangdong Provincial Key Laboratory of Advanced Energy Storage Materials, South China University of Technology, Guangzhou, 510640, China
| | - Hui Li
- School of Science, RMIT University, Melbourne, VIC, 3000, Australia
| | - Dawei Su
- School of Mathematical and Physical Sciences Faculty of Science University of Technology Sydney, Sydney, NSW, 2007, Australia
| | - Baohua Jia
- School of Science, RMIT University, Melbourne, VIC, 3000, Australia
| | - Tianyi Ma
- School of Science, RMIT University, Melbourne, VIC, 3000, Australia
| |
Collapse
|
8
|
Lin C, Li TC, Wang P, Xu Y, Li DS, Sliva A, Yang HY. In Situ Formed Robust Solid Electrolyte Interphase with Organic-Inorganic Hybrid Layer for Stable Zn Metal Anode. SMALL METHODS 2024:e2400127. [PMID: 38623969 DOI: 10.1002/smtd.202400127] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/24/2024] [Revised: 04/06/2024] [Indexed: 04/17/2024]
Abstract
Stabilizing the Zn anode/electrolyte interface is critical for advancing aqueous zinc ion storage technologies. Addressing this challenge helps minimize parasitic reactions and controls the formation of Zn dendrites, which is fundamental to achieving highly reversible Zn electrochemistry. In this study, 2% by volume of dimethyl sulfoxide (DMSO) is introduced into the baseline zinc sulfate (ZS) electrolyte, which acts as an efficient regulator to form a robust solid-electrolyte interphase (SEI) on the Zn anode. This innovative approach enables uniform Zn deposition and does not substantially modify the Zn2+ solvation structure. The Zn||Zn symmetric cell exhibits an extended cycle life of nearly one calendar year (>8500 h) at a current density of 0.5 mA cm-2 and an areal capacity of 0.5 mAh cm-2. Impressive full cell performance can be achieved. Specifically, the Zn||VS2 full cell achieves an areal capacity of 1.7 mAh cm-2, with a superior negative-to-positive capacity ratio of 2.5, and an electrolyte-to-capacity ratio of 101.4 µL mAh-1, displaying remarkable stability over 1000 cycles under a high mass loading of 11.0 mg cm-2 without significant degradation. This innovative approach in electrolyte engineering provides a new perspective on in situ SEI design and furthers the understanding of Zn anode stabilization.
Collapse
Affiliation(s)
- Congjian Lin
- Pillar of Engineering Product Development, Singapore University of Technology and Design, 8 Somapah Road, Singapore, 487372, Singapore
| | - Tian Chen Li
- Pillar of Engineering Product Development, Singapore University of Technology and Design, 8 Somapah Road, Singapore, 487372, Singapore
| | - Pinji Wang
- Pillar of Engineering Product Development, Singapore University of Technology and Design, 8 Somapah Road, Singapore, 487372, Singapore
- School of Materials Science and Engineering, Hunan Provincial Key Laboratory of Electronic Packaging and Advanced Functional Materials, Central South University, Changsha, 410083, P. R. China
| | - Yongtai Xu
- Pillar of Engineering Product Development, Singapore University of Technology and Design, 8 Somapah Road, Singapore, 487372, Singapore
| | - Dong-Sheng Li
- College of Materials and Chemical Engineering, Key Laboratory of Inorganic Nonmetallic Crystalline and Energy Conversion Materials, China Three Gorges University, Yichang, 443002, China
| | - Arlindo Sliva
- Pillar of Engineering Product Development, Singapore University of Technology and Design, 8 Somapah Road, Singapore, 487372, Singapore
| | - Hui Ying Yang
- Pillar of Engineering Product Development, Singapore University of Technology and Design, 8 Somapah Road, Singapore, 487372, Singapore
| |
Collapse
|
9
|
Cao J, Zhao F, Guan W, Yang X, Zhao Q, Gao L, Ren X, Wu G, Liu A. Additives for Aqueous Zinc-Ion Batteries: Recent Progress, Mechanism Analysis, and Future Perspectives. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2024:e2400221. [PMID: 38586921 DOI: 10.1002/smll.202400221] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/10/2024] [Revised: 03/21/2024] [Indexed: 04/09/2024]
Abstract
Aqueous zinc-ion batteries (ZIBs) stand out as a promising next-generation electrochemical energy storage technology, offering notable advantages such as high specific capacity, enhanced safety, and cost-effectiveness. However, the application of aqueous electrolytes introduces challenges: Zn dendrite formation and parasitic reactions at the anode, as well as dissolution, electrostatic interaction, and by-product formation at the cathode. In addressing these electrode-centric problems, additive engineering has emerged as an effective strategy. This review delves into the latest advancements in electrolyte additives for ZIBs, emphasizing their role in resolving the existing issues. Key focus areas include improving morphology and reducing side reactions during battery cycling using synergistic effects of modulating anode interface regulation, zinc facet control, and restructuring of hydrogen bonds and solvation sheaths. Special attention is given to the efficacy of amino acids and zwitterions due to their multifunction to improve the cycling performance of batteries concerning cycle stability and lifespan. Additionally, the recent additive advancements are studied for low-temperature and extreme weather applications meticulously. This review concludes with a holistic look at the future of additive engineering, underscoring its critical role in advancing ZIB performance amidst the complexities and challenges of electrolyte additives.
Collapse
Affiliation(s)
- Jianghui Cao
- School of Chemical Engineering, Ocean and Life Sciences, Dalian University of Technology, Panjin, 124221, China
- Leicester International Institute, Dalian University of Technology, Panjin, 124221, China
| | - Fang Zhao
- School of Chemical Engineering, Ocean and Life Sciences, Dalian University of Technology, Panjin, 124221, China
| | - Weixin Guan
- Materials Science and Engineering Program, Texas Materials Institute, The University of Texas at Austin, Austin, TX, 78712, USA
| | - Xiaoxuan Yang
- Department of Chemical and Biological Engineering, University at Buffalo, The State University of New York, Buffalo, NY, 14260, USA
| | - Qidong Zhao
- School of Chemical Engineering, Ocean and Life Sciences, Dalian University of Technology, Panjin, 124221, China
| | - Liguo Gao
- School of Chemical Engineering, Ocean and Life Sciences, Dalian University of Technology, Panjin, 124221, China
| | - Xuefeng Ren
- School of Chemical Engineering, Ocean and Life Sciences, Dalian University of Technology, Panjin, 124221, China
| | - Gang Wu
- Department of Chemical and Biological Engineering, University at Buffalo, The State University of New York, Buffalo, NY, 14260, USA
| | - Anmin Liu
- School of Chemical Engineering, Ocean and Life Sciences, Dalian University of Technology, Panjin, 124221, China
| |
Collapse
|
10
|
Li C, Wang H, Chen S, Bai Z, Zhu M, Wang H, Chen D, Ren Z, Chen S, Tang Y, Zhang Y. Weak-Water-Coordination Electrolyte to Stabilize Zinc Anode Interface for Aqueous Zinc Ion Batteries. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2024; 20:e2306939. [PMID: 37929662 DOI: 10.1002/smll.202306939] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/13/2023] [Revised: 10/09/2023] [Indexed: 11/07/2023]
Abstract
The performance of zinc-ion batteries is severely hindered by the uncontrolled growth of dendrites and the severe side reactions on the zinc anode interface. To address these challenges, a weak-water-coordination electrolyte is realized in a peptone-ZnSO4 -based electrolyte to simultaneously regulate the solvation structure and the interfacial environment. The peptone molecules have stronger interaction with Zn2+ ions than with water molecules, making them more prone to coordinate with Zn2+ ions and then reducing the active water in the solvated sheath. Meantime, the peptone molecules selectively adsorb on the Zn metal surface, and then are reduced to form a stable solid-electrolyte interface layer that can facilitate uniform and dense Zn deposition to inhabit the dendritic growth. Consequently, the Zn||Zn symmetric cell can exhibit exceptional cycling performance over 3200 h at 1.0 mA cm-2 /1.0 mAh cm-2 in the peptone-ZnSO4 -based electrolyte. Moreover, when coupled with a Na2 V6 O16 ·3H2 O cathode, the cell exhibits a long lifespan of 3000 cycles and maintains a high capacity retention rate of 84.3% at 5.0 A g-1 . This study presents an effective approach for enabling simultaneous regulation of the solvation structure and interfacial environment to design a highly reversible Zn anode.
Collapse
Affiliation(s)
- Chunxin Li
- College of Chemical Engineering, Fuzhou University, Fuzhou, 350116, P. R. China
| | - Huibo Wang
- College of Chemical Engineering, Fuzhou University, Fuzhou, 350116, P. R. China
- Qingyuan Innovation Laboratory, Quanzhou, 362801, P. R. China
| | - Shuwei Chen
- College of Chemical Engineering, Fuzhou University, Fuzhou, 350116, P. R. China
| | - Zhengshuai Bai
- College of Chemical Engineering, Fuzhou University, Fuzhou, 350116, P. R. China
| | - Mengyu Zhu
- College of Chemical Engineering, Fuzhou University, Fuzhou, 350116, P. R. China
| | - Huicai Wang
- College of Chemical Engineering, Fuzhou University, Fuzhou, 350116, P. R. China
| | - Danling Chen
- College of Chemical Engineering, Fuzhou University, Fuzhou, 350116, P. R. China
| | - Zejia Ren
- College of Chemical Engineering, Fuzhou University, Fuzhou, 350116, P. R. China
| | - Shi Chen
- Institute of Applied Physics and Materials Engineering, University of Macau, Macau, 999078, P. R. China
| | - Yuxin Tang
- College of Chemical Engineering, Fuzhou University, Fuzhou, 350116, P. R. China
- Qingyuan Innovation Laboratory, Quanzhou, 362801, P. R. China
| | - Yanyan Zhang
- College of Chemical Engineering, Fuzhou University, Fuzhou, 350116, P. R. China
| |
Collapse
|
11
|
Cao B, Xu C, Jiang B, Jin B, Zhang J, Ling L, Lu Y, Zou T, Zhang T. Electrolyte Optimization Strategy: Enabling Stable and Eco-Friendly Zinc Adaptive Interfacial Layer in Zinc Ion Batteries. Molecules 2024; 29:874. [PMID: 38398631 PMCID: PMC10892866 DOI: 10.3390/molecules29040874] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/03/2024] [Revised: 02/06/2024] [Accepted: 02/14/2024] [Indexed: 02/25/2024] Open
Abstract
Aqueous zinc ion batteries (AZIBs) have emerged as a promising battery technology due to their excellent safety, high capacity, low cost, and eco-friendliness. However, the cycle life of AZIBs is limited by severe side reactions and zinc dendrite growth on the zinc electrode surface, hindering large-scale application. Here, an electrolyte optimization strategy utilizing the simplest dipeptide glycylglycine (Gly-Gly) additive is first proposed. Theoretical calculations and spectral analysis revealed that, due to the strong interaction between the amino group and Zn atoms, Gly-Gly preferentially adsorbs on zinc's surface, constructing a stable and adaptive interfacial layer that inhibits zinc side reactions and dendrite growth. Furthermore, Gly-Gly can regulate zinc ion solvation, leading to a deposition mode shift from dendritic to lamellar and limiting two-dimensional dendrite diffusion. The symmetric cell with the addition of a 20 g/L Gly-Gly additive exhibits a cycle life of up to 1100 h. Under a high current density of 10 mA cm-2, a cycle life of 750 cycles further demonstrates the reliable adaptability of the interfacial layer. This work highlights the potential of Gly-Gly as a promising solution for improving the performance of AZIBs.
Collapse
Affiliation(s)
- Bozhong Cao
- College of Mechanical and Electrical Engineering, Guangdong University of Science and Technology, Dongguan 523000, China; (B.C.); (B.J.); (B.J.); (J.Z.); (L.L.); (Y.L.); (T.Z.)
| | - Chunyan Xu
- Institute for Interdisciplinary Quantum Information Technology, Jilin Engineering Normal University, Changchun 130052, China;
| | - Bingchun Jiang
- College of Mechanical and Electrical Engineering, Guangdong University of Science and Technology, Dongguan 523000, China; (B.C.); (B.J.); (B.J.); (J.Z.); (L.L.); (Y.L.); (T.Z.)
| | - Biao Jin
- College of Mechanical and Electrical Engineering, Guangdong University of Science and Technology, Dongguan 523000, China; (B.C.); (B.J.); (B.J.); (J.Z.); (L.L.); (Y.L.); (T.Z.)
| | - Jincheng Zhang
- College of Mechanical and Electrical Engineering, Guangdong University of Science and Technology, Dongguan 523000, China; (B.C.); (B.J.); (B.J.); (J.Z.); (L.L.); (Y.L.); (T.Z.)
| | - Lei Ling
- College of Mechanical and Electrical Engineering, Guangdong University of Science and Technology, Dongguan 523000, China; (B.C.); (B.J.); (B.J.); (J.Z.); (L.L.); (Y.L.); (T.Z.)
| | - Yusheng Lu
- College of Mechanical and Electrical Engineering, Guangdong University of Science and Technology, Dongguan 523000, China; (B.C.); (B.J.); (B.J.); (J.Z.); (L.L.); (Y.L.); (T.Z.)
| | - Tianyu Zou
- College of Mechanical and Electrical Engineering, Guangdong University of Science and Technology, Dongguan 523000, China; (B.C.); (B.J.); (B.J.); (J.Z.); (L.L.); (Y.L.); (T.Z.)
| | - Tong Zhang
- College of Mechanical and Electrical Engineering, Guangdong University of Science and Technology, Dongguan 523000, China; (B.C.); (B.J.); (B.J.); (J.Z.); (L.L.); (Y.L.); (T.Z.)
| |
Collapse
|
12
|
Niu Y, Chang L, Sun Q, Liu Y, Nie W, Duan T, Lu X, Cheng H. Manipulating Zn Metal Texture with Guided Zincophilic Sites via Electrochemical Stripping for Dendrite-Free Zn Anodes. ACS APPLIED MATERIALS & INTERFACES 2024; 16:6988-6997. [PMID: 38310560 DOI: 10.1021/acsami.3c14747] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/06/2024]
Abstract
Constructing a three-dimensional (3D) structure along with Zn (002) texture selective exposure is a promising strategy to tackle the issues faced by Zn metal anodes. Herein, for the first time, we proposed an electrochemical stripping strategy to achieve controlled modification of the texture and microstructure of zinc foils in one step, building a hierarchical structure with (002) texture preferred exposed Zn (SZ). The SZ with favorable zincophilic properties not only can reduce the concentration polarization at the interface but also allow Zn to grow horizontally on the edge of the (002) texture by guiding the adsorption sites for Zn2+. Moreover, the honeycomb-like structure is beneficial to rearrange the distribution of the Zn2+ flux as well as alleviating stress changes during cycling. Thus, the SZ||Cu cell exhibits excellent stability with a Coulombic efficiency of 99.76% over 1800 cycles. The SZ||NaV3O8·xH2O cell with inconspicuous self-discharge effect maintains a high areal capacity of 3.67 mA h cm-2 even after 700 cycles with a low N/P ratio of 3.6. This work achieves texture architecture and structure designing on Zn foils simultaneously by metallurgical electrochemical methods and opens up a potential strategy to implement the practicality of zinc metal anodes.
Collapse
Affiliation(s)
- Yunjiao Niu
- State Key Laboratory of Advanced Special Steel & Shanghai Key Laboratory of Advanced Ferrometallurgy & School of Materials Science and Engineering, Shanghai University, Shanghai 200444, P. R. China
| | - Linhui Chang
- State Key Laboratory of Advanced Special Steel & Shanghai Key Laboratory of Advanced Ferrometallurgy & School of Materials Science and Engineering, Shanghai University, Shanghai 200444, P. R. China
| | - Qiangchao Sun
- State Key Laboratory of Advanced Special Steel & Shanghai Key Laboratory of Advanced Ferrometallurgy & School of Materials Science and Engineering, Shanghai University, Shanghai 200444, P. R. China
| | - Yanbo Liu
- State Key Laboratory of Advanced Special Steel & Shanghai Key Laboratory of Advanced Ferrometallurgy & School of Materials Science and Engineering, Shanghai University, Shanghai 200444, P. R. China
| | - Wei Nie
- State Key Laboratory of Advanced Special Steel & Shanghai Key Laboratory of Advanced Ferrometallurgy & School of Materials Science and Engineering, Shanghai University, Shanghai 200444, P. R. China
| | - Tong Duan
- State Key Laboratory of Advanced Special Steel & Shanghai Key Laboratory of Advanced Ferrometallurgy & School of Materials Science and Engineering, Shanghai University, Shanghai 200444, P. R. China
| | - Xionggang Lu
- State Key Laboratory of Advanced Special Steel & Shanghai Key Laboratory of Advanced Ferrometallurgy & School of Materials Science and Engineering, Shanghai University, Shanghai 200444, P. R. China
| | - Hongwei Cheng
- State Key Laboratory of Advanced Special Steel & Shanghai Key Laboratory of Advanced Ferrometallurgy & School of Materials Science and Engineering, Shanghai University, Shanghai 200444, P. R. China
| |
Collapse
|
13
|
Wang T, Xi Q, Yao K, Liu Y, Fu H, Kavarthapu VS, Lee JK, Tang S, Fattakhova-Rohlfing D, Ai W, Yu JS. Surface Patterning of Metal Zinc Electrode with an In-Region Zincophilic Interface for High-Rate and Long-Cycle-Life Zinc Metal Anode. NANO-MICRO LETTERS 2024; 16:112. [PMID: 38334816 PMCID: PMC10858015 DOI: 10.1007/s40820-024-01327-2] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/18/2023] [Accepted: 12/14/2023] [Indexed: 02/10/2024]
Abstract
The undesirable dendrite growth induced by non-planar zinc (Zn) deposition and low Coulombic efficiency resulting from severe side reactions have been long-standing challenges for metallic Zn anodes and substantially impede the practical application of rechargeable aqueous Zn metal batteries (ZMBs). Herein, we present a strategy for achieving a high-rate and long-cycle-life Zn metal anode by patterning Zn foil surfaces and endowing a Zn-Indium (Zn-In) interface in the microchannels. The accumulation of electrons in the microchannel and the zincophilicity of the Zn-In interface promote preferential heteroepitaxial Zn deposition in the microchannel region and enhance the tolerance of the electrode at high current densities. Meanwhile, electron aggregation accelerates the dissolution of non-(002) plane Zn atoms on the array surface, thereby directing the subsequent homoepitaxial Zn deposition on the array surface. Consequently, the planar dendrite-free Zn deposition and long-term cycling stability are achieved (5,050 h at 10.0 mA cm-2 and 27,000 cycles at 20.0 mA cm-2). Furthermore, a Zn/I2 full cell assembled by pairing with such an anode can maintain good stability for 3,500 cycles at 5.0 C, demonstrating the application potential of the as-prepared ZnIn anode for high-performance aqueous ZMBs.
Collapse
Affiliation(s)
- Tian Wang
- Department of Electronics and Information Convergence Engineering, Institute for Wearable Convergence Electronics, Kyung Hee University, Yongin-si, Gyeonggi-do, 17104, Republic of Korea
| | - Qiao Xi
- Frontiers Science Center for Flexible Electronics (FSCFE) and Shaanxi Institute of Flexible Electronics (SIFE), Northwestern Polytechnical University (NPU), 127 West Youyi Road, Xi'an, 710072, People's Republic of China
| | - Kai Yao
- Institute of Energy and Climate Research: Materials Synthesis and Processing (IEK-1), Forschungszentrum Jülich GmbH, 52425, Jülich, Germany
| | - Yuhang Liu
- Frontiers Science Center for Flexible Electronics (FSCFE) and Shaanxi Institute of Flexible Electronics (SIFE), Northwestern Polytechnical University (NPU), 127 West Youyi Road, Xi'an, 710072, People's Republic of China
| | - Hao Fu
- School of Chemical Engineering, Sungkyunkwan University, 2066 Seobu-Ro, Jangan-Gu, Suwon-si, Gyeonggi-do, Republic of Korea
| | - Venkata Siva Kavarthapu
- Department of Electronics and Information Convergence Engineering, Institute for Wearable Convergence Electronics, Kyung Hee University, Yongin-si, Gyeonggi-do, 17104, Republic of Korea
| | - Jun Kyu Lee
- Department of Electronics and Information Convergence Engineering, Institute for Wearable Convergence Electronics, Kyung Hee University, Yongin-si, Gyeonggi-do, 17104, Republic of Korea
| | - Shaocong Tang
- Department of Electronics and Information Convergence Engineering, Institute for Wearable Convergence Electronics, Kyung Hee University, Yongin-si, Gyeonggi-do, 17104, Republic of Korea
| | - Dina Fattakhova-Rohlfing
- Institute of Energy and Climate Research: Materials Synthesis and Processing (IEK-1), Forschungszentrum Jülich GmbH, 52425, Jülich, Germany
| | - Wei Ai
- Frontiers Science Center for Flexible Electronics (FSCFE) and Shaanxi Institute of Flexible Electronics (SIFE), Northwestern Polytechnical University (NPU), 127 West Youyi Road, Xi'an, 710072, People's Republic of China.
| | - Jae Su Yu
- Department of Electronics and Information Convergence Engineering, Institute for Wearable Convergence Electronics, Kyung Hee University, Yongin-si, Gyeonggi-do, 17104, Republic of Korea.
| |
Collapse
|
14
|
Li X, Chen Z, Ruan P, Hu X, Lu B, Yuan X, Tian S, Zhou J. Inducing preferential growth of the Zn (002) plane by using a multifunctional chelator for achieving highly reversible Zn anodes. NANOSCALE 2024; 16:2923-2930. [PMID: 38231517 DOI: 10.1039/d3nr05699f] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 01/18/2024]
Abstract
Aqueous zinc-ion batteries (AZIBs) have demonstrated great potential for large-scale energy storage. However, their practical applications have been restricted by fast Zn dendrite growth and severe side reactions at the Zn/electrolyte interface. Herein, sodium gluconate is incorporated into a mild acidic electrolyte as a multifunctional additive to stabilize the Zn anode. Experiments and theoretical calculations reveal that the SG additive can induce planar growth of Zn along its (002) direction, thereby inhibiting Zn dendrite growth. This dendrite inhibition effect is attributed to the preferential adsorption of Zn2+ on the Zn (002) plane, while the Zn (100) and (101) planes are shielded by gluconate ions. Consequently, Zn||Zn symmetric cells with the electrolyte additive exhibit significantly prolonged cycle lives of 2000 h at 1 mA cm-2, 1 mA h cm-2 and 900 h at 5 mA cm-2, 2.5 mA h cm-2. Futhermore, the Zn||NH4V4O10 full cell retains 95% of its initial capacity after 2000 cycles at a current density of 5 A g-1 with an average CE of nearly 100%. This work offers a cost-effective strategy to enhance the electrochemical performance of AZIBs.
Collapse
Affiliation(s)
- Xi Li
- Hunan Provincial Key Laboratory of Flexible Electronic Materials Genome Engineering, Changsha University of Science and Technology, Changsha 410004, China
| | - Zhenjie Chen
- Hunan Provincial Key Laboratory of Flexible Electronic Materials Genome Engineering, Changsha University of Science and Technology, Changsha 410004, China
| | - Pengchao Ruan
- School of Materials Science and Engineering, Hunan Provincial Key Laboratory of Electronic Packaging and Advanced Functional Materials, Central South University, Changsha 410083, China.
| | - Xueting Hu
- School of Materials Science and Engineering, Hunan Provincial Key Laboratory of Electronic Packaging and Advanced Functional Materials, Central South University, Changsha 410083, China.
| | - Bingan Lu
- School of Physics and Electronics, Hunan University, Changsha 410082, China
| | - Xiaoming Yuan
- Hunan Key Laboratory of Nanophotonics and Devices, School of Physics, Central South University, 932 South Lushan Road, Changsha 410083, China
| | - Siyu Tian
- School of Materials Science and Engineering, Hunan Provincial Key Laboratory of Electronic Packaging and Advanced Functional Materials, Central South University, Changsha 410083, China.
- Department of Mechanical Engineering, The University of Texas at Dallas, 800 W Campbell Rd, Richardson, Texas 75080, USA.
| | - Jiang Zhou
- School of Materials Science and Engineering, Hunan Provincial Key Laboratory of Electronic Packaging and Advanced Functional Materials, Central South University, Changsha 410083, China.
| |
Collapse
|
15
|
Gou Q, Chen Z, Luo H, Deng J, Zhang B, Xu N, Cui J, Zheng Y, Li M, Li J. Synergistic Modulation of Mass Transfer and Parasitic Reactions of Zn Metal Anode via Bioinspired Artificial Protection Layer. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2024; 20:e2305902. [PMID: 37775329 DOI: 10.1002/smll.202305902] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/14/2023] [Revised: 09/08/2023] [Indexed: 10/01/2023]
Abstract
Rechargeable aqueous zinc-ion batteries are regarded as promising energy storage devices due to their attractive economic benefits and extraordinary electrochemical performance. However, the sluggish Zn2+ mass transfer behavior and water-induced parasitic reactions that occurred on the anode-electrode interface inevitably restrain their applications. Herein, inspired by the selective permeability and superior stability of plasma membrane, a thin UiO-66 metal-organic framework layer with smart aperture size is ex-situ decorated onto the Zn anode. Experimental characterizations in conjunction with theoretical calculations demonstrate that this bio-inspired layer promotes the de-solvation process of hydrated Zn2+ and reduces the effective contact between the anode and H2 O molecules, thereby boosting Zn2+ deposition kinetics and restraining interfacial parasitic reactions. Hence, the Zn||Zn cells could sustain a long lifespan of 1680 h and the Zn||Cu cells yielded a stable coulombic efficiency of over 99.3% throughout 600 cycles under the assistance of the bio-inspired layer. Moreover, pairing with δ-MnO2 cathode, the full cells also demonstrate prominent cycling stability and rate performance. From the bio-inspired design philosophy, this work provides a novel insight into the development of aqueous batteries.
Collapse
Affiliation(s)
- Qianzhi Gou
- MOE Key Laboratory of Low-grade Energy Utilization Technologies and Systems, CQU-NUS Renewable Energy Materials and Devices Joint Laboratory, School of Energy and Power Engineering, Chongqing University, Chongqing, 400044, China
| | - Zhaoyu Chen
- MOE Key Laboratory of Low-grade Energy Utilization Technologies and Systems, CQU-NUS Renewable Energy Materials and Devices Joint Laboratory, School of Energy and Power Engineering, Chongqing University, Chongqing, 400044, China
| | - Haoran Luo
- MOE Key Laboratory of Low-grade Energy Utilization Technologies and Systems, CQU-NUS Renewable Energy Materials and Devices Joint Laboratory, School of Energy and Power Engineering, Chongqing University, Chongqing, 400044, China
| | - Jiangbin Deng
- MOE Key Laboratory of Low-grade Energy Utilization Technologies and Systems, CQU-NUS Renewable Energy Materials and Devices Joint Laboratory, School of Energy and Power Engineering, Chongqing University, Chongqing, 400044, China
| | - Ben Zhang
- MOE Key Laboratory of Low-grade Energy Utilization Technologies and Systems, CQU-NUS Renewable Energy Materials and Devices Joint Laboratory, School of Energy and Power Engineering, Chongqing University, Chongqing, 400044, China
| | - Nuo Xu
- MOE Key Laboratory of Low-grade Energy Utilization Technologies and Systems, CQU-NUS Renewable Energy Materials and Devices Joint Laboratory, School of Energy and Power Engineering, Chongqing University, Chongqing, 400044, China
| | - Junyi Cui
- Sichuan University-Pittsburgh Institute (SCUPI), Sichuan University, Chengdu, Sichuan, 610207, China
| | - Yujie Zheng
- MOE Key Laboratory of Low-grade Energy Utilization Technologies and Systems, CQU-NUS Renewable Energy Materials and Devices Joint Laboratory, School of Energy and Power Engineering, Chongqing University, Chongqing, 400044, China
| | - Meng Li
- MOE Key Laboratory of Low-grade Energy Utilization Technologies and Systems, CQU-NUS Renewable Energy Materials and Devices Joint Laboratory, School of Energy and Power Engineering, Chongqing University, Chongqing, 400044, China
| | - Jun Li
- MOE Key Laboratory of Low-grade Energy Utilization Technologies and Systems, CQU-NUS Renewable Energy Materials and Devices Joint Laboratory, School of Energy and Power Engineering, Chongqing University, Chongqing, 400044, China
| |
Collapse
|
16
|
Wang S, Liu G, Wan W, Li X, Li J, Wang C. Acetamide-Caprolactam Deep Eutectic Solvent-Based Electrolyte for Stable Zn-Metal Batteries. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2024; 36:e2306546. [PMID: 37801323 DOI: 10.1002/adma.202306546] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/05/2023] [Revised: 09/30/2023] [Indexed: 10/07/2023]
Abstract
Aqueous Zn-ion batteries (AZIBs) are promising for grid-scale energy storage. However, conventional AZIBs face challenges including hydrogen evolution reaction (HER), leading to high local pH, and by-product formation on the anode. Hereby the hydrogen bonds in the aqueous electrolyte are reconstructed by using a deep eutectic co-solvent (DES) made of acetamide (H-bond donor) and caprolactam (H-bond acceptor), which effectively suppresses the reactivity of water and broadens the electrochemical voltage stability window. The coordination between Zn2+ and acetamide-caprolactam in DES-based electrolytes produces a unique solvation structure that promotes the preferential growth of Zn crystals along the (002) plane. This will inhibit the formation of Zn dendrites and ensure the uniform deposition of Zn-ions on the anode surface. In addition, it is found that this DES-based electrolyte can form a protective membrane on the anode surface, reducing the risks of Zn corrosion. Compared to conventional electrolytes, the DES-based electrolyte shows a long-term stable plating/stripping performance with a significantly improved Coulombic efficiency from 78.18% to 98.37%. It is further demonstrated that a Zn||VS2 full-cell with the DES-based electrolyte exhibits enhanced stability after 500 cycles with 85.4% capacity retention at 0.5 A g-1 .
Collapse
Affiliation(s)
- Shihe Wang
- School of Materials Science and Engineering, Tongji University, Shanghai, 201804, China
| | - Ganxiong Liu
- School of Materials Science and Engineering, Tongji University, Shanghai, 201804, China
| | - Wang Wan
- School of Materials Science and Engineering, Tongji University, Shanghai, 201804, China
| | - Xueyang Li
- School of Materials Science and Engineering, Tongji University, Shanghai, 201804, China
| | - Ju Li
- Department of Materials Science and Engineering and Department of Nuclear Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA, 02139, USA
| | - Chao Wang
- School of Materials Science and Engineering, Tongji University, Shanghai, 201804, China
| |
Collapse
|
17
|
Liu Q, Liu X, Liu Y, Huang M, Wang W, Cheng Y, Zhang H, Xu L. Atomic-Level Customization of Zinc Crystallization Kinetics at the Interface for High-Utilization Zn Anodes. ACS NANO 2024. [PMID: 38285902 DOI: 10.1021/acsnano.3c10394] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 01/31/2024]
Abstract
Understanding the crystallization occurring at the inner interfaces during electrochemical deposition is crucial for achieving a high reversibility in zinc anodes. However, design rules for crystallization kinetics still lack predictive power, particularly at the atomic scale, posing a significant challenge. Herein, we propose a crystal facet terminating agent, LaCl3, which modulates the preferential crystallization orientation of Zn by regulating its growth kinetics through the synergistic adsorption of dual ions. Interface molecular dynamics (MD) simulations and crucial experimental parameters reveal that the strong (002) facet texture of Zn deposits primarily depends on the adsorption of strong inhibitors. Specifically, the high adsorption free energy of Cl- on the Zn (002) facet and the concomitant aggregation of La3+ reduces the growth rate of the Zn (002) facet, thereby favoring its preservation as the final crystal facet. Consequently, this terminating agent enables the Zn anodes to deliver a high cumulative capacity of 12 Ah cm-2 at 40 mA cm-2, 20 mAh cm-2. The Zn||MnO2 full cell, when coupled with a high-mass-loading cathode and limited Zn supply, can maintain a practical areal capacity of 3.39 mAh cm-2. Furthermore, rigorous testing conditions and the successful scaling up to a 0.34 Ah pouch cell further confirm its promising prospects for practical applications.
Collapse
Affiliation(s)
- Qin Liu
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, School of Materials Science and Engineering, Wuhan University of Technology, Wuhan 430070, China
| | - Xiong Liu
- School of Materials Science and Engineering, Zhengzhou University, Zhengzhou, 450001, People's Republic of China
| | - Yu Liu
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, School of Materials Science and Engineering, Wuhan University of Technology, Wuhan 430070, China
| | - Meng Huang
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, School of Materials Science and Engineering, Wuhan University of Technology, Wuhan 430070, China
| | - Weihao Wang
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, School of Materials Science and Engineering, Wuhan University of Technology, Wuhan 430070, China
| | - Yu Cheng
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, School of Materials Science and Engineering, Wuhan University of Technology, Wuhan 430070, China
| | - Hong Zhang
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, School of Materials Science and Engineering, Wuhan University of Technology, Wuhan 430070, China
| | - Lin Xu
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, School of Materials Science and Engineering, Wuhan University of Technology, Wuhan 430070, China
- Hubei Longzhong Laboratory, Wuhan University of Technology (Xiangyang Demonstration Zone), Xiangyang 441000, People's Republic of China
| |
Collapse
|
18
|
Hu S, Ma H, Fan X, Tao H, Yang X. Simultaneously Tailoring Zinc Deposition and Solvation Structure by Electrolyte Additive. ACS APPLIED MATERIALS & INTERFACES 2024; 16:933-942. [PMID: 38148324 DOI: 10.1021/acsami.3c16717] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/28/2023]
Abstract
Aqueous zinc ion batteries (AZIBs) have attracted intense attention due to their high safety and low cost. Unfortunately, the serious dendrite growth and side reactions of the Zn metal anode in an aqueous electrolyte result in rapid battery failure, hindering the practical application of AZIBs. Herein, sodium gluconate as a dual-functional electrolyte additive has been employed to enhance the electrochemical performance of AZIBs. Gluconate anions preferentially adsorb on the surface of the Zn anode, which effectively prevents H2 evolution and induces uniform Zn deposition to suppress dendrite growth. Moreover, the gluconate anions can highly coordinate with Zn2+, promoting the dissolution of [Zn(H2O)6]2+ to inhibit side reactions and the water-induced corrosion reaction. As a result, the Zn||Zn symmetric battery exhibits a long-term cycling stability of over 3000 h at 1 mA cm-2/1 mA h cm-2 and 600 h at 10 mA cm-2/10 mA h cm-2. Furthermore, the NH4V4O10||Zn full battery also displays excellent cycling stability and a high reversible capacity of 193 mA h g-1 at 2 A g-1 after 1000 cycles. Given the low-cost advantage of SG, the proposed interface chemistry modulation strategy holds considerable potential for promoting the commercialization of AZIBs.
Collapse
Affiliation(s)
- Shiyang Hu
- College of Materials and Chemical Engineering, Hubei Provincial Collaborative Innovation Center for New Energy Microgrid, China Three Gorges University, Yichang, Hubei 443002, China
| | - Hui Ma
- Hubei Three Gorges Polytechnic, Yichang, Hubei 443000, China
| | - Xiaomeng Fan
- School of Materials Science and Engineering, Guilin University of Technology, Guilin 541004, China
| | - Huachao Tao
- College of Materials and Chemical Engineering, Hubei Provincial Collaborative Innovation Center for New Energy Microgrid, China Three Gorges University, Yichang, Hubei 443002, China
| | - Xuelin Yang
- College of Materials and Chemical Engineering, Hubei Provincial Collaborative Innovation Center for New Energy Microgrid, China Three Gorges University, Yichang, Hubei 443002, China
| |
Collapse
|
19
|
Park JB, Choi C, Jung SW, Min BC, Park JH, Kim DW. Designing Chemically Replaced Interfacial Layer via Unveiling the Influence of Zn Crystal Facets for Practical Zn-Metal Anodes. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2024; 36:e2308684. [PMID: 37947147 DOI: 10.1002/adma.202308684] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/25/2023] [Revised: 10/26/2023] [Indexed: 11/12/2023]
Abstract
Zn metal anodes (ZMAs) undergo irregular deposition and unfavorable side reactions, which hinders the practical application of aqueous rechargeable Zn metal batteries (ARZMBs). Chemical replacement reaction (CRR) strategies can achieve stable ZMAs, but the effect of the crystal facets of metallic Zn as reductants remains poorly understood. In this study, based on the observation that preferentially exposed Zn crystal facets affect the surface characteristics of chemically replaced layers in Sn-based CRR, a multifunctional Sn-based interfacial layer (ZnTCF@Sn) is designed on the Zn with textured crystal facets using a novel two-step CRR process. ZnTCF@Sn simultaneously provides abundant zincophilic sites and high surface energy and homogenizes the distribution of current/Zn2+ flux, resulting in fast electrochemical kinetics and dendrite-free deposition. Furthermore, the uniform Sn coverage on the ZnTCF@Sn surface inhibits side reactions and enhances reversibility during Zn deposition/dissolution. Thus, the ZnTCF@Sn achieves exceptional cyclability over 1200 h even under harsh operating conditions with a cumulative capacity of 24 Ah cm-2 . This study contributes to the development of practical ARZMBs by providing new insights into the effect of the Zn crystal facets on the surface modification of ZMAs through various CRRs.
Collapse
Affiliation(s)
- Jung Been Park
- School of Civil, Environmental, and Architectural Engineering, Korea University, Seoul, 02841, South Korea
| | - Changhoon Choi
- Department of Environment and Energy Engineering, Sungshin Women's University, Seoul, 01133, Republic of Korea
| | - Sang Won Jung
- KU-LG Energy Solution Department of Battery-Smart Factory, Korea University, Seoul, 02841, South Korea
| | - Byeong Chan Min
- KU-LG Energy Solution Department of Battery-Smart Factory, Korea University, Seoul, 02841, South Korea
| | - Jong Hyun Park
- School of Civil, Environmental, and Architectural Engineering, Korea University, Seoul, 02841, South Korea
| | - Dong-Wan Kim
- School of Civil, Environmental, and Architectural Engineering, Korea University, Seoul, 02841, South Korea
- KU-LG Energy Solution Department of Battery-Smart Factory, Korea University, Seoul, 02841, South Korea
| |
Collapse
|
20
|
Li M, Wang X, Meng J, Zuo C, Wu B, Li C, Sun W, Mai L. Comprehensive Understandings of Hydrogen Bond Chemistry in Aqueous Batteries. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2024; 36:e2308628. [PMID: 37910810 DOI: 10.1002/adma.202308628] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/24/2023] [Revised: 10/17/2023] [Indexed: 11/03/2023]
Abstract
Aqueous batteries are emerging as highly promising contenders for large-scale grid energy storage because of uncomplicated assembly, exceptional safety, and cost-effectiveness. The unique aqueous electrolyte with a rich hydrogen bond (HB) environment inevitably has a significant impact on the electrode materials and electrochemical processes. While numerous reviews have focused on the materials design and assembly of aqueous batteries, the utilization of HB chemistry is overlooked. Herein, instead of merely compiling recent advancements, this review presents a comprehensive summary and analysis of the profound implication exerted by HB on all components of the aqueous batteries. Intricate links between the novel HB chemistry and various aqueous batteries are ingeniously constructed within the critical aspects, such as self-discharge, structural stability of electrode materials, pulverization, solvation structures, charge carrier diffusion, corrosion reactions, pH sensitivity, water splitting, polysulfides shuttle, and H2 S evolution. By adopting a vantage point that encompasses material design, binder and separator functionalization, electrolyte regulation, and HB optimization, a critical examination of the key factors that impede electrochemical performance in diverse aqueous batteries is conducted. Finally, insights are rendered properly based on HB chemistry, with the aim of propelling the advancement of state-of-the-art aqueous batteries.
Collapse
Affiliation(s)
- Ming Li
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, 430070, China
- School of Materials and Energy, University of Electronic Science and Technology of China, Chengdu, 611731, China
| | - Xuanpeng Wang
- Department of Physical Science & Technology, School of Science, Wuhan University of Technology, Wuhan, 430070, P. R. China
- Hubei Longzhong Laboratory, Wuhan University of Technology (Xiangyang Demonstration Zone), Xiangyang, Hubei, 441000, China
| | - Jiashen Meng
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, 430070, China
| | - Chunli Zuo
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, 430070, China
| | - Buke Wu
- Department of Mechanical and Energy Engineering, Southern University of Science and Technology, Shenzhen, 518055, China
| | - Cong Li
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, 430070, China
| | - Wei Sun
- School of Materials and Energy, University of Electronic Science and Technology of China, Chengdu, 611731, China
| | - Liqiang Mai
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, 430070, China
- Hubei Longzhong Laboratory, Wuhan University of Technology (Xiangyang Demonstration Zone), Xiangyang, Hubei, 441000, China
| |
Collapse
|
21
|
Wu P, Xu L, Xiao X, Ye X, Meng Y, Liu S. An Industrially Applicable Passivation Strategy for Significantly Improving Cyclability of Zinc Metal Anodes in Aqueous Batteries. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2024; 36:e2306601. [PMID: 37851917 DOI: 10.1002/adma.202306601] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/06/2023] [Revised: 10/02/2023] [Indexed: 10/20/2023]
Abstract
The cycling instability of metallic Zn anodes hinders the practicability of aqueous Zn-ion batteries, though aqueous Zn-ion batteries may be the most credible alternative technology for future electrochemical energy storage applications. Commercially available trivalent chromium conversion films (TCCF) are successfully employed as robust artificial interphases on Zn metal anodes (ZMAs). Fabricated through a simple immersion method, the TCCF-protected Zn (TCCF@Zn) electrode enables a superlow nucleation overpotential for Zn plating of 6.9 mV under 1 mA cm-2 , outstanding Coulombic efficiency of 99.7% at 3 mA cm-2 for 1600 cycles in Zn||Cu asymmetric cells and superior cyclability in symmetric Zn||Zn batteries at 0.2, 2, and 5 mA cm-2 for 2500 h and 10 mA cm-2 for 1200 h. More importantly, the TCCF@Zn||V2 O5 full cell exhibits a specific capacity of 118.5 mAh g-1 with a retention of 53.4% at 3 A g-1 for 3000 cycles, which is considerably larger than that of the pristine Zn||V2 O5 full cell (59.7 mAh g-1 with a retention of 25.7%). This study demonstrates a highly efficient and low-cost surface modification strategy derived from an industrially applicable trivalent chromium passivation technique aimed at obtaining dendrite-free ZMAs with high reversibility for practical Zn batteries in the near future.
Collapse
Affiliation(s)
- Peng Wu
- School of Chemical Engineering and Technology, The Key Lab of Low-Carbon Chemistry and Energy Conservation of Guangdong Province, Sun Yat-sen University, Zhuhai, 519082, China
| | - Luyu Xu
- School of Chemical Engineering and Technology, The Key Lab of Low-Carbon Chemistry and Energy Conservation of Guangdong Province, Sun Yat-sen University, Zhuhai, 519082, China
| | - Xuemei Xiao
- School of Chemical Engineering and Technology, The Key Lab of Low-Carbon Chemistry and Energy Conservation of Guangdong Province, Sun Yat-sen University, Zhuhai, 519082, China
| | - Xiaoman Ye
- School of Chemical Engineering and Technology, The Key Lab of Low-Carbon Chemistry and Energy Conservation of Guangdong Province, Sun Yat-sen University, Zhuhai, 519082, China
| | - Yuezhong Meng
- The Key Laboratory of Low-Carbon Chemistry and Energy Conservation of Guangdong Province/State Key Laboratory of Optoelectronic Materials and Technologies, School of Materials Science and Engineering, Sun Yat-sen University, Guangzhou, 510275, China
| | - Sheng Liu
- School of Chemical Engineering and Technology, The Key Lab of Low-Carbon Chemistry and Energy Conservation of Guangdong Province, Sun Yat-sen University, Zhuhai, 519082, China
| |
Collapse
|
22
|
Xu J, Li H, Jin Y, Zhou D, Sun B, Armand M, Wang G. Understanding the Electrical Mechanisms in Aqueous Zinc Metal Batteries: From Electrostatic Interactions to Electric Field Regulation. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2024; 36:e2309726. [PMID: 37962322 DOI: 10.1002/adma.202309726] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/20/2023] [Revised: 11/10/2023] [Indexed: 11/15/2023]
Abstract
Aqueous Zn metal batteries are considered as competitive candidates for next-generation energy storage systems due to their excellent safety, low cost, and environmental friendliness. However, the inevitable dendrite growth, severe hydrogen evolution, surface passivation, and sluggish reaction kinetics of Zn metal anodes hinder the practical application of Zn metal batteries. Detailed summaries and prospects have been reported focusing on the research progress and challenges of Zn metal anodes, including electrolyte engineering, electrode structure design, and surface modification. However, the essential electrical mechanisms that significantly influence Zn2+ ions migration and deposition behaviors have not been reviewed yet. Herein, in this review, the regulation mechanisms of electrical-related electrostatic repulsive/attractive interactions on Zn2+ ions migration, desolvation, and deposition behaviors are systematically discussed. Meanwhile, electric field regulation strategies to promote the Zn2+ ions diffusion and uniform Zn deposition are comprehensively reviewed, including enhancing and homogenizing electric field intensity inside the batteries and adding external magnetic/pressure/thermal field to couple with the electric field. Finally, future perspectives on the research directions of the electrical-related strategies for building better Zn metal batteries in practical applications are offered.
Collapse
Affiliation(s)
- Jing Xu
- Research Center of Grid Energy Storage and Battery Application, School of Electrical Engineering, Zhengzhou University, Zhengzhou, 450001, China
| | - Haolin Li
- Research Center of Grid Energy Storage and Battery Application, School of Electrical Engineering, Zhengzhou University, Zhengzhou, 450001, China
| | - Yang Jin
- Research Center of Grid Energy Storage and Battery Application, School of Electrical Engineering, Zhengzhou University, Zhengzhou, 450001, China
| | - Dong Zhou
- Tsinghua Shenzhen International Graduate School, Tsinghua University, Shenzhen, 518055, China
| | - Bing Sun
- Centre for Clean Energy Technology, School of Mathematical and Physical Sciences, Faculty of Science, University of Technology Sydney, Ultimo, New South Wales, 2007, Australia
| | - Michel Armand
- Centre for Cooperative Research on Alternative Energies (CIC energiGUNE) Basque Research and Technology Alliance (BRTA), Alava Technology Park, Albert Einstein 48, Vitoria-Gasteiz, 01510, Spain
| | - Guoxiu Wang
- Centre for Clean Energy Technology, School of Mathematical and Physical Sciences, Faculty of Science, University of Technology Sydney, Ultimo, New South Wales, 2007, Australia
| |
Collapse
|
23
|
Zeng G, Sun Q, Horta S, Wang S, Lu X, Zhang CY, Li J, Li J, Ci L, Tian Y, Ibáñez M, Cabot A. A Layered Bi 2 Te 3 @PPy Cathode for Aqueous Zinc-Ion Batteries: Mechanism and Application in Printed Flexible Batteries. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2024; 36:e2305128. [PMID: 37555532 DOI: 10.1002/adma.202305128] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/30/2023] [Revised: 07/16/2023] [Indexed: 08/10/2023]
Abstract
Low-cost, safe, and environmental-friendly rechargeable aqueous zinc-ion batteries (ZIBs) are promising as next-generation energy storage devices for wearable electronics among other applications. However, sluggish ionic transport kinetics and the unstable electrode structure during ionic insertion/extraction hamper their deployment. Herein, a new cathode material based on a layered metal chalcogenide (LMC), bismuth telluride (Bi2 Te3 ), coated with polypyrrole (PPy) is proposed. Taking advantage of the PPy coating, the Bi2 Te3 @PPy composite presents strong ionic absorption affinity, high oxidation resistance, and high structural stability. The ZIBs based on Bi2 Te3 @PPy cathodes exhibit high capacities and ultra-long lifespans of over 5000 cycles. They also present outstanding stability even under bending. In addition, here the reaction mechanism is analyzed using in situ X-ray diffraction, X-ray photoelectron spectroscopy, and computational tools and it is demonstrated that, in the aqueous system, Zn2+ is not inserted into the cathode as previously assumed. In contrast, proton charge storage dominates the process. Overall, this work not only shows the great potential of LMCs as ZIB cathode materials and the advantages of PPy coating, but also clarifies the charge/discharge mechanism in rechargeable ZIBs based on LMCs.
Collapse
Affiliation(s)
- Guifang Zeng
- Catalonia Institute for Energy Research - IREC, Sant Adrià de Besòs, Barcelona, 08930, Spain
- Department of Electronic and Biomedical Engineering, Universitat de Barcelona, Barcelona, 08028, Spain
| | - Qing Sun
- Catalonia Institute for Energy Research - IREC, Sant Adrià de Besòs, Barcelona, 08930, Spain
- State Key Laboratory of Advanced Welding and Joining, School of Materials Science and Engineering, Harbin Institute of Technology (Shenzhen), Shenzhen, 518055, China
| | - Sharona Horta
- IST Austria, Am Campus 1, Klosterneuburg, 3400, Austria
| | - Shang Wang
- State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin, 150001, China
| | - Xuan Lu
- Catalonia Institute for Energy Research - IREC, Sant Adrià de Besòs, Barcelona, 08930, Spain
| | - Chao Yue Zhang
- Catalonia Institute for Energy Research - IREC, Sant Adrià de Besòs, Barcelona, 08930, Spain
| | - Jing Li
- State Key Laboratory of Advanced Welding and Joining, School of Materials Science and Engineering, Harbin Institute of Technology (Shenzhen), Shenzhen, 518055, China
| | - Junshan Li
- Institute for Advanced Study, Chengdu University, Chengdu, 610106, China
| | - Lijie Ci
- State Key Laboratory of Advanced Welding and Joining, School of Materials Science and Engineering, Harbin Institute of Technology (Shenzhen), Shenzhen, 518055, China
| | - Yanhong Tian
- State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin, 150001, China
| | - Maria Ibáñez
- IST Austria, Am Campus 1, Klosterneuburg, 3400, Austria
| | - Andreu Cabot
- Catalonia Institute for Energy Research - IREC, Sant Adrià de Besòs, Barcelona, 08930, Spain
- ICREA Pg. Lluis Companys, Barcelona, 08010, Spain
| |
Collapse
|
24
|
Chen J, He M, Hu A, Liu M, Zhao C, Zhou B, Li R, Yan Z, Pan Y, Fan Y, Liu J, Cao L, Long J. Artificial bi-functional layers promoting Zn 2+ desolvation and homogeneous deposition for reversible zinc metal anodes. J Colloid Interface Sci 2023; 652:727-736. [PMID: 37453874 DOI: 10.1016/j.jcis.2023.07.063] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/28/2023] [Revised: 07/05/2023] [Accepted: 07/10/2023] [Indexed: 07/18/2023]
Abstract
Rechargeable aqueous zinc-ion hybrid supercapacitors (ZHSs) are drawing extensive attention because of their cost-effectiveness and diminished safety hazards. Nevertheless, large-scale application of ZHSs has been hindered by the severe side reactions and rampant dendrites growth on the surface of Zn metal anodes. Herein, we propose a three-dimensional organic-inorganic composite frame material as an artificial bi-functional layer coated on the zinc foil, featuring nitrogenous functional groups with zincophilicity (abbreviated as NCFM@Zn). The nitrogen (N) site's strong adsorption capacity and synergistic effect of the sub-nanopore size promote rapid desolvation of zinc ions and reduce side reactions, while also prolonging galvanized nucleation's Sand's time and allowing for even nucleation. Moreover, the uniform distribution of N on the layer results in homogeneous zinc ions flux and supports consistent zinc plating while inhibiting dendrites generation. As a result of this unique artificial bi-functional layer, symmetric Zn cells can survive 2500 h at 2.5 mA cm-2. High-areal-capacity zinc||activated carbon hybrid supercapacitors also demonstrate 20,000 cycles at high Coulombic efficiency, thus highlighting the utter convenience and potential of this strategy for modifying rechargeable metal hybrid supercapacitor surfaces.
Collapse
Affiliation(s)
- Jiahao Chen
- College of Materials and Chemistry & Chemical Engineering, Chengdu University of Technology, 1# Dongsanlu, Erxianqiao, Chengdu 610059, Sichuan, PR China
| | - Miao He
- College of Materials and Chemistry & Chemical Engineering, Chengdu University of Technology, 1# Dongsanlu, Erxianqiao, Chengdu 610059, Sichuan, PR China; State Key Laboratory of Electronic Thin Films and Integrated Devices, University of Electronic Science and Technology of China, Chengdu 610054, Sichuan, PR China
| | - Anjun Hu
- College of Materials and Chemistry & Chemical Engineering, Chengdu University of Technology, 1# Dongsanlu, Erxianqiao, Chengdu 610059, Sichuan, PR China; State Key Laboratory of Electronic Thin Films and Integrated Devices, University of Electronic Science and Technology of China, Chengdu 610054, Sichuan, PR China.
| | - Mengjiao Liu
- College of Materials and Chemistry & Chemical Engineering, Chengdu University of Technology, 1# Dongsanlu, Erxianqiao, Chengdu 610059, Sichuan, PR China
| | - Chuan Zhao
- College of Materials and Chemistry & Chemical Engineering, Chengdu University of Technology, 1# Dongsanlu, Erxianqiao, Chengdu 610059, Sichuan, PR China
| | - Bo Zhou
- College of Materials and Chemistry & Chemical Engineering, Chengdu University of Technology, 1# Dongsanlu, Erxianqiao, Chengdu 610059, Sichuan, PR China
| | - Runjing Li
- College of Materials and Chemistry & Chemical Engineering, Chengdu University of Technology, 1# Dongsanlu, Erxianqiao, Chengdu 610059, Sichuan, PR China
| | - Zhongfu Yan
- College of Materials and Chemistry & Chemical Engineering, Chengdu University of Technology, 1# Dongsanlu, Erxianqiao, Chengdu 610059, Sichuan, PR China
| | - Yu Pan
- College of Materials and Chemistry & Chemical Engineering, Chengdu University of Technology, 1# Dongsanlu, Erxianqiao, Chengdu 610059, Sichuan, PR China
| | - Yining Fan
- College of Materials and Chemistry & Chemical Engineering, Chengdu University of Technology, 1# Dongsanlu, Erxianqiao, Chengdu 610059, Sichuan, PR China
| | - Jing Liu
- College of Materials and Chemistry & Chemical Engineering, Chengdu University of Technology, 1# Dongsanlu, Erxianqiao, Chengdu 610059, Sichuan, PR China
| | - Liujun Cao
- College of Materials and Chemistry & Chemical Engineering, Chengdu University of Technology, 1# Dongsanlu, Erxianqiao, Chengdu 610059, Sichuan, PR China
| | - Jianping Long
- College of Materials and Chemistry & Chemical Engineering, Chengdu University of Technology, 1# Dongsanlu, Erxianqiao, Chengdu 610059, Sichuan, PR China.
| |
Collapse
|
25
|
Li T, Yan S, Dong H, Zheng Y, Ming K, Tong Z, Li G, Li H, Li W, Wang Q, Liu J, Wang Y. Boosting uniform nucleation and suppressing hydrogen evolution with an in-situ formed zinc hyaluronate protective film on zinc anodes. J Colloid Interface Sci 2023; 651:959-967. [PMID: 37579670 DOI: 10.1016/j.jcis.2023.08.047] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/01/2023] [Revised: 08/01/2023] [Accepted: 08/07/2023] [Indexed: 08/16/2023]
Abstract
Developing long-cycle stable Zn-ion batteries encounters significant challenges associated with Zn anodes. To address these issues, we propose an interface engineering strategy using an artificial protective layer called zinc hyaluronate (ZH) on the Zn anode surface. The ZH film acts as a barrier, preventing direct contact between Zn anode and electrolyte, reducing hydrogen evolution and corrosion. Its carboxyl and hydroxyl groups create uniform and plentiful nucleophilic sites for Zn2+ ions, promoting uniform Zn deposition and suppressing dendrite growth. Remarkably, a Zn//Zn symmetric cell assembled with ZH-decorated Zn foil (Zn@ZH) exhibits outstanding cycle life, lasting 3600 h at a current density of 5 mA cm-2 and a capacity density of 5 mAh cm-2, much better than cells with pristine Zn anode. Even under extremely tough conditions of 10 mA cm-2 and 10 mAh cm-2, the battery life exceeds 1300 h. Furthermore, the Zn@ZH//V2O5 full cell demonstrates superior capacity retention compared to the Zn//V2O5 cell after 1000 cycles at a current density of 10 A g-1. These results highlight the benefits of the artificial protective layer strategy for advanced Zn anodes, providing insights into the underlying mechanism and promoting the development of high-performance aqueous zinc ion batteries.
Collapse
Affiliation(s)
- Taofeng Li
- Institute for Energy Research, Jiangsu University, Zhenjiang, Jiangsu 212013, PR China
| | - Suxia Yan
- Institute for Energy Research, Jiangsu University, Zhenjiang, Jiangsu 212013, PR China.
| | - Hongyu Dong
- Institute for Energy Research, Jiangsu University, Zhenjiang, Jiangsu 212013, PR China; School of Mechanical Engineering, Jiangsu University, Zhenjiang, Jiangsu 212013, PR China
| | - Yang Zheng
- Institute for Energy Research, Jiangsu University, Zhenjiang, Jiangsu 212013, PR China
| | - Kun Ming
- Institute for Energy Research, Jiangsu University, Zhenjiang, Jiangsu 212013, PR China
| | - Zhuang Tong
- Institute for Energy Research, Jiangsu University, Zhenjiang, Jiangsu 212013, PR China
| | - Guochun Li
- Institute for Energy Research, Jiangsu University, Zhenjiang, Jiangsu 212013, PR China
| | - Huaming Li
- Institute for Energy Research, Jiangsu University, Zhenjiang, Jiangsu 212013, PR China
| | - Weimin Li
- Shenzhen College of Advanced Technology, University of Chinese Academy of Sciences, Shenzhen 518055, China; Shandong Zhongke Advanced Technology Co., Ltd, Jinan 250101, China
| | - Quan Wang
- School of Mechanical Engineering, Jiangsu University, Zhenjiang, Jiangsu 212013, PR China
| | - Junfeng Liu
- Institute for Energy Research, Jiangsu University, Zhenjiang, Jiangsu 212013, PR China.
| | - Yong Wang
- Institute for Energy Research, Jiangsu University, Zhenjiang, Jiangsu 212013, PR China.
| |
Collapse
|
26
|
Hu Z, Wang X, Du W, Zhang Z, Tang Y, Ye M, Zhang Y, Liu X, Wen Z, Li CC. Crowding Effect-Induced Zinc-Enriched/Water-Lean Polymer Interfacial Layer Toward Practical Zn-Iodine Batteries. ACS NANO 2023; 17:23207-23219. [PMID: 37963092 DOI: 10.1021/acsnano.3c10081] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/16/2023]
Abstract
Although the meticulous design of functional diversity within the polymer interfacial layer holds paramount significance in mitigating the challenges associated with hydrogen evolution reactions and dendrite growth in zinc anodes, this pursuit remains a formidable task. Here, a large-scale producible zinc-enriched/water-lean polymer interfacial layer, derived from carboxymethyl chitosan (CCS), is constructed on zinc anodes by integration of electrodeposition and a targeted complexation strategy for highly reversible Zn plating/stripping chemistry. Zinc ions-induced crowding effect between CCS skeleton creates a strong hydrogen bonding environment and squeezes the moving space for water/anion counterparts, therefore greatly reducing the number of active water molecules and alleviating cathodic I3- attack. Moreover, the as-constructed Zn2+-enriched layer substantially facilitate rapid Zn2+ migration through the NH2-Zn2+-NH2 binding/dissociation mode of CCS molecule chain. Consequently, the large-format Zn symmetry cell (9 cm2) with a Zn-CCS electrode demonstrates excellent cycling stability over 1100 h without bulging. When coupled with an I2 cathode, the assembled Zn-I2 multilayer pouch cell displays an exceptionally high capacity of 140 mAh and superior long-term cycle performance of 400 cycles. This work provides a universal strategy to prepare large-scale production and high-performance polymer crowding layer for metal anode-based battery, analogous outcomes were veritably observed on other metals (Al, Cu, Sn).
Collapse
Affiliation(s)
- Zuyang Hu
- Guangdong Provincial Key Laboratory of Plant Resources Biorefinery, School of Chemical Engineering and Light Industry Guangdong University of Technology, Guangzhou 510006, People's Republic of China
| | - Xiangwen Wang
- School of Chemistry and Chemical Engineering, Queen's University Belfast, David Keir Building, Stranmillis Road, Belfast BT9 5AG, Northern Ireland, United Kingdom
| | - Wencheng Du
- Guangdong Provincial Key Laboratory of Plant Resources Biorefinery, School of Chemical Engineering and Light Industry Guangdong University of Technology, Guangzhou 510006, People's Republic of China
| | - Zicheng Zhang
- Guangdong Provincial Key Laboratory of Plant Resources Biorefinery, School of Chemical Engineering and Light Industry Guangdong University of Technology, Guangzhou 510006, People's Republic of China
| | - Yongchao Tang
- Guangdong Provincial Key Laboratory of Plant Resources Biorefinery, School of Chemical Engineering and Light Industry Guangdong University of Technology, Guangzhou 510006, People's Republic of China
| | - Minghui Ye
- Guangdong Provincial Key Laboratory of Plant Resources Biorefinery, School of Chemical Engineering and Light Industry Guangdong University of Technology, Guangzhou 510006, People's Republic of China
| | - Yufei Zhang
- Guangdong Provincial Key Laboratory of Plant Resources Biorefinery, School of Chemical Engineering and Light Industry Guangdong University of Technology, Guangzhou 510006, People's Republic of China
| | - Xiaoqing Liu
- Guangdong Provincial Key Laboratory of Plant Resources Biorefinery, School of Chemical Engineering and Light Industry Guangdong University of Technology, Guangzhou 510006, People's Republic of China
| | - Zhipeng Wen
- Guangdong Provincial Key Laboratory of Plant Resources Biorefinery, School of Chemical Engineering and Light Industry Guangdong University of Technology, Guangzhou 510006, People's Republic of China
| | - Cheng Chao Li
- Guangdong Provincial Key Laboratory of Plant Resources Biorefinery, School of Chemical Engineering and Light Industry Guangdong University of Technology, Guangzhou 510006, People's Republic of China
| |
Collapse
|
27
|
Zhao Y, Guo S, Chen M, Lu B, Zhang X, Liang S, Zhou J. Tailoring grain boundary stability of zinc-titanium alloy for long-lasting aqueous zinc batteries. Nat Commun 2023; 14:7080. [PMID: 37925505 PMCID: PMC10625522 DOI: 10.1038/s41467-023-42919-7] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/30/2023] [Accepted: 10/26/2023] [Indexed: 11/06/2023] Open
Abstract
The detrimental parasitic reactions and uncontrolled deposition behavior derived from inherently unstable interface have largely impeded the practical application of aqueous zinc batteries. So far, tremendous efforts have been devoted to tailoring interfaces, while stabilization of grain boundaries has received less attention. Here, we demonstrate that preferential distribution of intermetallic compounds at grain boundaries via an alloying strategy can substantially suppress intergranular corrosion. In-depth morphology analysis reveals their thermodynamic stability, ensuring sustainable potency. Furthermore, the hybrid nucleation and growth mode resulting from reduced Gibbs free energy contributes to the spatially uniform distribution of Zn nuclei, promoting the dense Zn deposition. These integrated merits enable a high Zn reversibility of 99.85% for over 4000 cycles, steady charge-discharge at 10 mA cm-2, and impressive cyclability for roughly 3500 cycles in Zn-Ti//NH4V4O10 full cell. Notably, the multi-layer pouch cell of 34 mAh maintains stable cycling for 500 cycles. This work highlights a fundamental understanding of microstructure and motivates the precise tuning of grain boundary characteristics to achieve highly reversible Zn anodes.
Collapse
Affiliation(s)
- Yunxiang Zhao
- School of Materials Science and Engineering, Hunan Provincial Key Laboratory of Electronic Packaging and Advanced Functional Materials, Central South University, Changsha, 410083, Hunan, China
| | - Shan Guo
- School of Materials Science and Engineering, Hunan Provincial Key Laboratory of Electronic Packaging and Advanced Functional Materials, Central South University, Changsha, 410083, Hunan, China
| | - Manjing Chen
- School of Materials Science and Engineering, Hunan Provincial Key Laboratory of Electronic Packaging and Advanced Functional Materials, Central South University, Changsha, 410083, Hunan, China
| | - Bingan Lu
- School of Physics and Electronics, Hunan University, Changsha, 410082, Hunan, China
| | - Xiaotan Zhang
- School of Materials Science and Engineering, Hunan Provincial Key Laboratory of Electronic Packaging and Advanced Functional Materials, Central South University, Changsha, 410083, Hunan, China.
| | - Shuquan Liang
- School of Materials Science and Engineering, Hunan Provincial Key Laboratory of Electronic Packaging and Advanced Functional Materials, Central South University, Changsha, 410083, Hunan, China.
| | - Jiang Zhou
- School of Materials Science and Engineering, Hunan Provincial Key Laboratory of Electronic Packaging and Advanced Functional Materials, Central South University, Changsha, 410083, Hunan, China.
| |
Collapse
|
28
|
Zhang Z, Zhang Y, Ye M, Wen Z, Tang Y, Liu X, Li CC. Lithium Bis(oxalate)borate Additive for Self-repairing Zincophilic Solid Electrolyte Interphases towards Ultrahigh-rate and Ultra-stable Zinc Anodes. Angew Chem Int Ed Engl 2023; 62:e202311032. [PMID: 37691598 DOI: 10.1002/anie.202311032] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/31/2023] [Revised: 09/04/2023] [Accepted: 09/11/2023] [Indexed: 09/12/2023]
Abstract
The artificial solid electrolyte interphase (SEI) plays a pivotal role in Zn anode stabilization but its long-term effectiveness at high rates is still challenged. Herein, to achieve superior long-life and high-rate Zn anode, an exquisite electrolyte additive, lithium bis(oxalate)borate (LiBOB), is proposed to in situ derive a highly Zn2+ -conductive SEI and to dynamically patrol its cycling-initiated defects. Profiting from the as-constructed real-time, automatic SEI repairing mechanism, the Zn anode can be cycled with distinct reversibility over 1800 h at an ultrahigh current density of 50 mA cm-2 , presenting a record-high cumulative capacity up to 45 Ah cm-2 . The superiority of the formulated electrolyte is further demonstrated in the Zn||MnO2 and Zn||NaV3 O8 full batteries, even when tested under harsh conditions (limited Zn supply (N/P≈3), 2500 cycles). This work brings inspiration for developing fast-charging Zn batteries toward grid-scale storage of renewable energy sources.
Collapse
Affiliation(s)
- Zhaoyu Zhang
- Guangdong Provincial Key Laboratory of Plant Resources Biorefinery, School of Chemical Engineering and Light Industry, Guangdong University of Technology, Guangzhou, 510006, China
| | - Yufei Zhang
- Guangdong Provincial Key Laboratory of Plant Resources Biorefinery, School of Chemical Engineering and Light Industry, Guangdong University of Technology, Guangzhou, 510006, China
| | - Minghui Ye
- Guangdong Provincial Key Laboratory of Plant Resources Biorefinery, School of Chemical Engineering and Light Industry, Guangdong University of Technology, Guangzhou, 510006, China
| | - Zhipeng Wen
- Guangdong Provincial Key Laboratory of Plant Resources Biorefinery, School of Chemical Engineering and Light Industry, Guangdong University of Technology, Guangzhou, 510006, China
| | - Yongchao Tang
- Guangdong Provincial Key Laboratory of Plant Resources Biorefinery, School of Chemical Engineering and Light Industry, Guangdong University of Technology, Guangzhou, 510006, China
| | - Xiaoqing Liu
- Guangdong Provincial Key Laboratory of Plant Resources Biorefinery, School of Chemical Engineering and Light Industry, Guangdong University of Technology, Guangzhou, 510006, China
| | - Cheng Chao Li
- Guangdong Provincial Key Laboratory of Plant Resources Biorefinery, School of Chemical Engineering and Light Industry, Guangdong University of Technology, Guangzhou, 510006, China
| |
Collapse
|
29
|
Luo M, Li TC, Wang P, Zhang D, Lin C, Liu C, Li DS, Chen W, Yang HY, Zhou X. Dynamic Regulation of the Interfacial pH for Highly Reversible Aqueous Zinc Ion Batteries. NANO LETTERS 2023; 23:9491-9499. [PMID: 37843076 DOI: 10.1021/acs.nanolett.3c02904] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 10/17/2023]
Abstract
An electrolyte additive, with convenient operation and remarkable functions, has been regarded as an effective strategy for prolonging the cycle life of aqueous zinc ion batteries. However, it is still difficult to dynamically regulate the unstable Zn interface during long-term cycling. Herein, tricine was introduced as an efficient regulator to achieve a pH-stable and byproduct-free interface. The functional zwitterion of tricine not only inhibits interfacial pH perturbation and parasitic reactions by the trapping effect of an anionic group (-COO-) but also simultaneously creates a uniform electric field by the electrostatic shielding effect of a cationic group (-NH2+). Such synergy accordingly eliminates dendrite formation and creates a chemical equilibrium in the electrolyte, endowing the Zn||Zn cell with long-term Zn plating/stripping for 2060 h at 5 mA cm-2 and 720 h at 10 mA cm-2. As a result, the Zn||VS2 full cell under a high cathodic loading mass (8.6 mg cm-2) exhibits exceptional capacity retention of 93% after 1000 cycles.
Collapse
Affiliation(s)
- Min Luo
- Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, College of Materials Science and Engineering, Nanjing Forestry University, Nanjing 210037, P. R. China
- Pillar of Engineering Product Development, Singapore University of Technology and Design, 8 Somapah Road, Singapore 487372
| | - Tian Chen Li
- Pillar of Engineering Product Development, Singapore University of Technology and Design, 8 Somapah Road, Singapore 487372
| | - Pinji Wang
- Pillar of Engineering Product Development, Singapore University of Technology and Design, 8 Somapah Road, Singapore 487372
- School of Materials Science and Engineering, Hunan Provincial Key Laboratory of Electronic Packaging and Advanced Functional Materials, Central South University, Changsha 410083, P. R. China
| | - Daotong Zhang
- Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, College of Materials Science and Engineering, Nanjing Forestry University, Nanjing 210037, P. R. China
| | - Congjian Lin
- Pillar of Engineering Product Development, Singapore University of Technology and Design, 8 Somapah Road, Singapore 487372
| | - Chaozheng Liu
- Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, College of Materials Science and Engineering, Nanjing Forestry University, Nanjing 210037, P. R. China
| | - Dong-Sheng Li
- College of Materials and Chemical Engineering, Key Laboratory of Inorganic Nonmetallic Crystalline and Energy Conversion Materials, China Three Gorges University, Yichang 443002, P. R. China
| | - Weimin Chen
- Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, College of Materials Science and Engineering, Nanjing Forestry University, Nanjing 210037, P. R. China
| | - Hui Ying Yang
- Pillar of Engineering Product Development, Singapore University of Technology and Design, 8 Somapah Road, Singapore 487372
| | - Xiaoyan Zhou
- Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, College of Materials Science and Engineering, Nanjing Forestry University, Nanjing 210037, P. R. China
| |
Collapse
|
30
|
Liu N, Zhao X, Wang X, Li Q, Wang L. A V 2O 5 cathode for aqueous rechargeable Pb-ion batteries. Chem Commun (Camb) 2023; 59:12719-12722. [PMID: 37796234 DOI: 10.1039/d3cc04337a] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/06/2023]
Abstract
Aqueous rechargeable metal batteries (AMBs) have attracted great attention and have been regarded as a next-generation promising energy storage system. However, the high-activity metal anodes usually face side reactions, passivation, and hydrogen evolution reactions, which impede the development of high-performance AMBs. Here, we designed and assembled a Pb metal battery based on a highly reversible Pb metal anode and layered V2O5 cathode, which showed good electrochemical performance. This new-type battery will encourage more investigations for high-performance AMBs and open up an innovation pathway for traditional lead-acid batteries.
Collapse
Affiliation(s)
- Ningbo Liu
- College of Chemistry & Materials Science, Key Laboratory of Analytical Science and Technology of Hebei Province, Hebei University, Baoding 071002, China.
| | - Xiaoying Zhao
- College of Chemistry & Materials Science, Key Laboratory of Analytical Science and Technology of Hebei Province, Hebei University, Baoding 071002, China.
| | - Xiaohan Wang
- College of Chemistry & Materials Science, Key Laboratory of Analytical Science and Technology of Hebei Province, Hebei University, Baoding 071002, China.
| | - Qiaqia Li
- College of Chemistry & Materials Science, Key Laboratory of Analytical Science and Technology of Hebei Province, Hebei University, Baoding 071002, China.
| | - Liubin Wang
- College of Chemistry & Materials Science, Key Laboratory of Analytical Science and Technology of Hebei Province, Hebei University, Baoding 071002, China.
| |
Collapse
|
31
|
Li J, Yin X, Duan F, Ba J, Wu M, Zhao K, Lian R, Wang C, Wei Y, Wang Y. Pure Amorphous and Ultrathin Phosphate Layer with Superior Ionic Conduction for Zinc Anode Protection. ACS NANO 2023; 17:20062-20072. [PMID: 37791687 DOI: 10.1021/acsnano.3c05640] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 10/05/2023]
Abstract
Fast and uniform ion transport within the solid electrolyte interphase (SEI) is considered a crucial factor for ensuring the long-term stability of metal electrodes. In this study, we present the fabrication of ultrathin artificial interphases consisting of a zinc phosphate nanofilm with pure amorphous characteristics and a surfactant overlayer. The thickness of the interphases can be precisely controlled within the range of a few tens of nanometers. We explore the impact of artificial SEI structure, including thickness and crystallinity, on its protective capabilities. The pure amorphous phosphate layer with optimized nanoscale thickness is found to provide an abundance of short and isotropic ion migration pathways and a low diffusion energy barrier. These features facilitate rapid and homogeneous Zn2+ transportation, resulting in compact and planar zinc deposition. Meanwhile, the hydrophobic alkyl moieties of the overlayer prevent disassociation of water at the interface. As a result, this nanofilm endures ultralong cycling stability with a low overpotential and enables high Zn plating/stripping reversibility. The Zn||MnO2 full cell shows a stable cycle life for 700 cycles under practical conditions of lean electrolyte, high areal capacity cathode, and limited Zn excess. These findings provide insights into the design and optimization of SEI layers for protection of metal anodes.
Collapse
Affiliation(s)
- Junpeng Li
- Key Laboratory of Physics and Technology for Advanced Batteries (Ministry of Education), College of Physics, Jilin University, Changchun 130012, China
| | - Xiuxiu Yin
- College of Chemistry, Jilin University, Changchun 130012, China
| | - Fengxue Duan
- Key Laboratory of Physics and Technology for Advanced Batteries (Ministry of Education), College of Physics, Jilin University, Changchun 130012, China
| | - Junjie Ba
- Key Laboratory of Physics and Technology for Advanced Batteries (Ministry of Education), College of Physics, Jilin University, Changchun 130012, China
| | - Mengqi Wu
- School of Physical Science and Technology, Hebei University, Baoding 071002, China
| | - Kangning Zhao
- Laboratory of Advanced Separations, Ecole Polytechnique Federale de Lausanne, Sion CH-1951, Switzerland
| | - Ruqian Lian
- School of Physical Science and Technology, Hebei University, Baoding 071002, China
| | - Chunzhong Wang
- Key Laboratory of Physics and Technology for Advanced Batteries (Ministry of Education), College of Physics, Jilin University, Changchun 130012, China
| | - Yingjin Wei
- Key Laboratory of Physics and Technology for Advanced Batteries (Ministry of Education), College of Physics, Jilin University, Changchun 130012, China
- Chongqing Research Institute, Jilin University, Chongqing 401135, China
| | - Yizhan Wang
- Key Laboratory of Physics and Technology for Advanced Batteries (Ministry of Education), College of Physics, Jilin University, Changchun 130012, China
- Chongqing Research Institute, Jilin University, Chongqing 401135, China
| |
Collapse
|
32
|
Zhou L, Yang R, Xu S, Lei X, Zheng Y, Wen J, Zhang F, Tang Y. Maximizing Electrostatic Polarity of Non-Sacrificial Electrolyte Additives Enables Stable Zinc-Metal Anodes for Aqueous Batteries. Angew Chem Int Ed Engl 2023; 62:e202307880. [PMID: 37584605 DOI: 10.1002/anie.202307880] [Citation(s) in RCA: 5] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/05/2023] [Revised: 08/12/2023] [Accepted: 08/15/2023] [Indexed: 08/17/2023]
Abstract
Although additives are widely used in aqueous electrolytes to inhibit the formation of dendrites and hydrogen evolution reactions on Zn anodes, there is a lack of rational design principles and systematic mechanistic studies on how to select a suitable additive to regulate reversible Zn plating/stripping chemistry. Here, using saccharides as the representatives, we reveal that the electrostatic polarity of non-sacrificial additives is a critical descriptor for their ability to stabilize Zn anodes. Non-sacrificial additives are found to continuously modulate the solvation structure of Zn ions and form a molecular adsorption layer (MAL) for uniform Zn deposition, avoiding the thick solid electrolyte interphase layer due to the decomposition of sacrificial additives. A high electrostatic polarity renders sucrose the best hydrated Zn2+ desolvation ability and facilitates the MAL formation, resulting in the best cycling stability with a long-term reversible plating/stripping cycle life of thousands of hours. This study provides theoretical guidance for the screening of optimal additives for high-performance ZIBs.
Collapse
Affiliation(s)
- Liyu Zhou
- Advanced Energy Storage Technology Research Center, Shenzhen Institute of Advanced Technology, Chinese Academy of Sciences, Shenzhen, 518055, China
- Nano Science and Technology Institute, University of Science and Technology of China, Suzhou, 215123, China
| | - Rui Yang
- Advanced Energy Storage Technology Research Center, Shenzhen Institute of Advanced Technology, Chinese Academy of Sciences, Shenzhen, 518055, China
| | - Siqi Xu
- Advanced Energy Storage Technology Research Center, Shenzhen Institute of Advanced Technology, Chinese Academy of Sciences, Shenzhen, 518055, China
| | - Xin Lei
- Advanced Energy Storage Technology Research Center, Shenzhen Institute of Advanced Technology, Chinese Academy of Sciences, Shenzhen, 518055, China
| | - Yongping Zheng
- Advanced Energy Storage Technology Research Center, Shenzhen Institute of Advanced Technology, Chinese Academy of Sciences, Shenzhen, 518055, China
| | - Jianfeng Wen
- Advanced Energy Storage Technology Research Center, Shenzhen Institute of Advanced Technology, Chinese Academy of Sciences, Shenzhen, 518055, China
| | - Fan Zhang
- Advanced Energy Storage Technology Research Center, Shenzhen Institute of Advanced Technology, Chinese Academy of Sciences, Shenzhen, 518055, China
| | - Yongbing Tang
- Advanced Energy Storage Technology Research Center, Shenzhen Institute of Advanced Technology, Chinese Academy of Sciences, Shenzhen, 518055, China
- University of Chinese Academy of Sciences, Beijing, 100049, China
| |
Collapse
|
33
|
Zhou K, Li Z, Qiu X, Yu Z, Wang Y. Boosting Zn Anode Utilization by Trace Iodine Ions in Organic-Water Hybrid Electrolytes through Formation of Anion-rich Adsorbing Layers. Angew Chem Int Ed Engl 2023; 62:e202309594. [PMID: 37531265 DOI: 10.1002/anie.202309594] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/06/2023] [Revised: 08/01/2023] [Accepted: 08/01/2023] [Indexed: 08/04/2023]
Abstract
Aqueous Zn batteries are attracting extensive attentions, but their application is still hindered by H2 O-induced Zn-corrosion and hydrogen evolution reactions. Addition of organic solvents into aqueous electrolytes to limit the H2 O activity is a promising solution, but at the cost of greatly reduced Zn anode kinetics. Here we propose a simple strategy for this challenge by adding 50 mM iodine ions into an organic-water (1,2-dimethoxyethane (DME)+water) hybrid electrolyte, which enables the electrolyte simultaneously owns the advantages of low H2 O activity and accelerated Zn kinetics. We demonstrate that the DME breaks the H2 O hydrogen-bond network and exclude H2 O from Zn2+ solvation shell. And the I- is firmly adsorbed on the Zn anode, reducing the Zn2+ de-solvation barrier from 74.33 kJ mol-1 to 32.26 kJ mol-1 and inducing homogeneous nucleation behavior. With such electrolyte, the Zn//Zn symmetric cell exhibits a record high cycling lifetime (14.5 months) and achieves high Zn anode utilization (75.5 %). In particular, the Zn//VS2 @SS full cell with the optimized electrolyte stably cycles for 170 cycles at a low N : P ratio (3.64). Even with the cathode mass-loading of 16.7 mg cm-2 , the full cell maintains the areal capacity of 0.96 mAh cm-2 after 1600 cycles.
Collapse
Affiliation(s)
- Kang Zhou
- Department of Chemistry and Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials, Institute of New Energy, iChEM (Collaborative Innovation Center of Chemistry for Energy Materials), Fudan University, Shanghai, 200433, China
| | - Zhi Li
- Department of Chemistry and Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials, Institute of New Energy, iChEM (Collaborative Innovation Center of Chemistry for Energy Materials), Fudan University, Shanghai, 200433, China
| | - Xuan Qiu
- Department of Chemistry and Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials, Institute of New Energy, iChEM (Collaborative Innovation Center of Chemistry for Energy Materials), Fudan University, Shanghai, 200433, China
| | - Zhuo Yu
- Department of Chemistry and the Waterloo Institute for Nanotechnology, University of Waterloo, Waterloo, N2L 3G1, Ontario, Canada
| | - Yonggang Wang
- Department of Chemistry and Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials, Institute of New Energy, iChEM (Collaborative Innovation Center of Chemistry for Energy Materials), Fudan University, Shanghai, 200433, China
| |
Collapse
|
34
|
Wang D, Lv D, Peng H, Wang C, Liu H, Yang J, Qian Y. Solvation Modulation Enhances Anion-Derived Solid Electrolyte Interphase for Deep Cycling of Aqueous Zinc Metal Batteries. Angew Chem Int Ed Engl 2023; 62:e202310290. [PMID: 37522818 DOI: 10.1002/anie.202310290] [Citation(s) in RCA: 11] [Impact Index Per Article: 11.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/19/2023] [Revised: 07/28/2023] [Accepted: 07/31/2023] [Indexed: 08/01/2023]
Abstract
Stable Zn anodes with a high utilization efficiency pose a challenge due to notorious dendrite growth and severe side reactions. Therefore, electrolyte additives are developed to address these issues. However, the additives are always consumed by the electrochemical reactions over cycling, affecting the cycling stability. Here, hexamethylphosphoric triamide (HMPA) is reported as an electrolyte additive for achieving stable cycling of Zn anodes. HMPA reshapes the solvation structures and promotes anion decomposition, leading to the in situ formation of inorganic-rich solid-electrolyte-interphase. More interestingly, this anion decomposition does not involve HMPA, preserving its long-term impact on the electrolyte. Thus, the symmetric cells with HMPA in the electrolyte survive ≈500 h at 10 mA cm-2 for 10 mAh cm-2 or ≈200 h at 40 mA cm-2 for 10 mAh cm-2 with a Zn utilization rate of 85.6 %. The full cells of Zn||V2 O5 exhibit a record-high cumulative capacity even under a lean electrolyte condition (E/C ratio=12 μL mAh-1 ), a limited Zn supply (N/P ratio=1.8) and a high areal capacity (6.6 mAh cm-2 ).
Collapse
Affiliation(s)
- Dongdong Wang
- Key Laboratory of Colloid and Interface Chemistry, Ministry of Education, School of Chemistry and Chemical Engineering, Shandong University, 250100, Jinan, P. R. China
| | - Dan Lv
- Key Laboratory of Colloid and Interface Chemistry, Ministry of Education, School of Chemistry and Chemical Engineering, Shandong University, 250100, Jinan, P. R. China
| | - Huili Peng
- Key Laboratory of Colloid and Interface Chemistry, Ministry of Education, School of Chemistry and Chemical Engineering, Shandong University, 250100, Jinan, P. R. China
| | - Cheng Wang
- Key Laboratory of Colloid and Interface Chemistry, Ministry of Education, School of Chemistry and Chemical Engineering, Shandong University, 250100, Jinan, P. R. China
| | - Hongxia Liu
- School of Chemistry and Chemical Engineering, Wuhan Textile University, 430200, Wuhan, P. R. China
| | - Jian Yang
- Key Laboratory of Colloid and Interface Chemistry, Ministry of Education, School of Chemistry and Chemical Engineering, Shandong University, 250100, Jinan, P. R. China
| | - Yitai Qian
- Key Laboratory of Colloid and Interface Chemistry, Ministry of Education, School of Chemistry and Chemical Engineering, Shandong University, 250100, Jinan, P. R. China
- Hefei National Laboratory for Physical Science at Microscale, Department of Chemistry, University of Science and Technology of China, 230026, Hefei, P. R. China
| |
Collapse
|
35
|
Lin P, Chen G, Kang Y, Zhang M, Yang J, Lv Z, Yang Y, Zhao J. Simultaneous Inhibition of Zn Dendrites and Polyiodide Ions Shuttle Effect by an Anion Concentrated Electrolyte Membrane for Long Lifespan Aqueous Zinc-Iodine Batteries. ACS NANO 2023; 17:15492-15503. [PMID: 37535393 DOI: 10.1021/acsnano.3c01518] [Citation(s) in RCA: 6] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 08/04/2023]
Abstract
Aqueous zinc-iodine (Zn-I2) batteries have attracted extensive attention due to their merits of inherent safety, wide natural abundance, and low cost. However, their application is seriously hindered by the irreversible capacity loss resulting from both anode and cathode. Herein, an anion concentrated electrolyte (ACE) membrane is designed to manipulate the Zn2+ ion flux on the zinc anode side and restrain the shuttle effect of polyiodide ions on the I2 cathode side simultaneously to realize long-lifetime separator-free Zn-I2 batteries. The ACE membrane with abundant sulfonic acid groups possesses a multifunctional amalgamation of good mechanical strength, guided Zn2+ ion transport, and effective charge repulsion of polyiodide ions. Moreover, rich ether oxygen, carbonyl, and S-O bonds in anionic polymer chains will form hydrogen bonds with water to reduce the proportion of free water in the ACE membrane, inhibiting the water-induced interfacial side reactions of the Zn metal anode. Besides, DFT calculations and in-situ UV-vis and in situ Raman results reveal that the shuttle effect of polyiodide ions is also significantly suppressed. Therefore, the ACE membrane enables a long lifespan of Zn anodes (3700 h) and excellent cycling stability of Zn-I2 batteries (10000 cycles), thus establishing a substantial base for their practical applications.
Collapse
Affiliation(s)
- Pengxiang Lin
- College of Chemistry and Chemical Engineering, State-Province Joint Engineering Laboratory of Power Source Technology for New Energy Vehicle, Tan Kah Kee Innovation Laboratory (IKKEM), State Key Laboratory of Physical Chemistry of Solid Surfaces, Xiamen University, Xiamen, 361005, P. R. China
| | - Guanhong Chen
- College of Chemistry and Chemical Engineering, State-Province Joint Engineering Laboratory of Power Source Technology for New Energy Vehicle, Tan Kah Kee Innovation Laboratory (IKKEM), State Key Laboratory of Physical Chemistry of Solid Surfaces, Xiamen University, Xiamen, 361005, P. R. China
| | - Yuanhong Kang
- College of Chemistry and Chemical Engineering, State-Province Joint Engineering Laboratory of Power Source Technology for New Energy Vehicle, Tan Kah Kee Innovation Laboratory (IKKEM), State Key Laboratory of Physical Chemistry of Solid Surfaces, Xiamen University, Xiamen, 361005, P. R. China
| | - Minghao Zhang
- College of Chemistry and Chemical Engineering, State-Province Joint Engineering Laboratory of Power Source Technology for New Energy Vehicle, Tan Kah Kee Innovation Laboratory (IKKEM), State Key Laboratory of Physical Chemistry of Solid Surfaces, Xiamen University, Xiamen, 361005, P. R. China
| | - Jin Yang
- College of Chemistry and Chemical Engineering, State-Province Joint Engineering Laboratory of Power Source Technology for New Energy Vehicle, Tan Kah Kee Innovation Laboratory (IKKEM), State Key Laboratory of Physical Chemistry of Solid Surfaces, Xiamen University, Xiamen, 361005, P. R. China
| | - Zeheng Lv
- College of Chemistry and Chemical Engineering, State-Province Joint Engineering Laboratory of Power Source Technology for New Energy Vehicle, Tan Kah Kee Innovation Laboratory (IKKEM), State Key Laboratory of Physical Chemistry of Solid Surfaces, Xiamen University, Xiamen, 361005, P. R. China
| | - Yang Yang
- College of Chemistry and Chemical Engineering, State-Province Joint Engineering Laboratory of Power Source Technology for New Energy Vehicle, Tan Kah Kee Innovation Laboratory (IKKEM), State Key Laboratory of Physical Chemistry of Solid Surfaces, Xiamen University, Xiamen, 361005, P. R. China
| | - Jinbao Zhao
- College of Chemistry and Chemical Engineering, State-Province Joint Engineering Laboratory of Power Source Technology for New Energy Vehicle, Tan Kah Kee Innovation Laboratory (IKKEM), State Key Laboratory of Physical Chemistry of Solid Surfaces, Xiamen University, Xiamen, 361005, P. R. China
| |
Collapse
|
36
|
Song X, Bai L, Wang C, Wang D, Xu K, Dong J, Li Y, Shen Q, Yang J. Synergistic Cooperation of Zn(002) Texture and Amorphous Zinc Phosphate for Dendrite-Free Zn Anodes. ACS NANO 2023. [PMID: 37498641 DOI: 10.1021/acsnano.3c04343] [Citation(s) in RCA: 15] [Impact Index Per Article: 15.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 07/28/2023]
Abstract
Zn anodes of aqueous Zn metal batteries face challenges from dendrite growth and side reactions. Building Zn(002) texture mitigates the issues but does not eradicate them. Zn(002) still faces severe challenges from corrosive electrolytes and dendrite growth, especially after hundreds of cycles. Therefore, it is necessary to have a passivation layer covering Zn(002). Here, Zn(002) texture and surface coating are achieved on Zn foils by an one-step annealing process, as demonstrated by ZnS, ZnSe, ZnF2, Zn3(PO4)2 (ZPO), etc. Using ZPO as a model, the coupling between surface coating and Zn(002) is illustrated in terms of dendrite-suppressing ability and diffusion energy barrier of Zn2+. The modified Zn foils (Zn(002)@ZPO) exhibit the excellent electrochemical performance, far superior to Zn(002) or ZPO alone. In the full cells, the performance is greatly improved even under harsh conditions, i.e., high areal capacity and limited Zn resource. This work achieves crystal engineering and surface coating on Zn anodes simultaneously and discloses the in-depth insights about the synergy of crystal orientation and passivation layers.
Collapse
Affiliation(s)
- Xinxin Song
- Key Laboratory of Colloid and Interface Chemistry, Ministry of Education, School of Chemistry and Chemical Engineering, Shandong University, Jinan 250100, P. R. China
| | - Linyu Bai
- State Key Laboratory of Crystal Materials, Shandong University, Jinan 250100, P. R. China
| | - Chenggang Wang
- Key Laboratory of Colloid and Interface Chemistry, Ministry of Education, School of Chemistry and Chemical Engineering, Shandong University, Jinan 250100, P. R. China
- School of Physics and Technology, University of Jinan, Jinan 250022, P. R. China
| | - Dongdong Wang
- Key Laboratory of Colloid and Interface Chemistry, Ministry of Education, School of Chemistry and Chemical Engineering, Shandong University, Jinan 250100, P. R. China
| | - Kun Xu
- Key Laboratory of Colloid and Interface Chemistry, Ministry of Education, School of Chemistry and Chemical Engineering, Shandong University, Jinan 250100, P. R. China
| | - Jingjing Dong
- Key Laboratory of Colloid and Interface Chemistry, Ministry of Education, School of Chemistry and Chemical Engineering, Shandong University, Jinan 250100, P. R. China
| | - Yanlu Li
- State Key Laboratory of Crystal Materials, Shandong University, Jinan 250100, P. R. China
| | - Qiang Shen
- Key Laboratory of Colloid and Interface Chemistry, Ministry of Education, School of Chemistry and Chemical Engineering, Shandong University, Jinan 250100, P. R. China
| | - Jian Yang
- Key Laboratory of Colloid and Interface Chemistry, Ministry of Education, School of Chemistry and Chemical Engineering, Shandong University, Jinan 250100, P. R. China
| |
Collapse
|
37
|
Hu B, Wang Y, Qian X, Chen W, Liang G, Chen J, Zhao J, Li W, Chen T, Fu J. Colloid Electrolyte with Weakly Solvated Structure and Optimized Electrode/Electrolyte Interface for Zinc Metal Batteries. ACS NANO 2023. [PMID: 37327363 DOI: 10.1021/acsnano.3c03638] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/18/2023]
Abstract
Aqueous zinc batteries are considered as a viable candidate for cost-effective and environmentally sustainable energy storage technology but are severely hampered by the notorious dendrite growth and parasitic reactions at the zinc anode side. Herein, we propose a bifunctional colloidal electrolyte design that utilizes upconversion nanocrystals, i.e., NaErF4@NaYF4, as a solid additive to provide the sustained release of functional metal and fluoride ions, which can effectively improve the reversibility of the Zn anode to inhibit dendrite growth and hydrogen evolution through forming an electrostatic shielding layer and in situ constructing a ZnF2-enriched protective interface. Experimental characterization and molecular dynamics simulation jointly confirm that the NaErF4@NaYF4 additive could modify the Zn2+ solvation environment in the vicinity of the NaErF4@NaYF4 surface via the strong electrostatic coupling with Zn2+ ions. As a consequence, the modified electrolyte enables stable zinc plating/stripping over 2100 h at a current density of 3 mA cm-2 and a capacity of 1 mAh cm-2 in symmetric cells. The assembled Zn||MnO2 full cells with a modified electrolyte can operate stably for 1600 cycles at 2 A g-1. This work thereby has great potential for the exploration of multifunctional electrolyte additives toward long-lasting aqueous Zn metal batteries.
Collapse
Affiliation(s)
- Bin Hu
- School of Chemistry and Chemical Engineering, Nanjing University of Science and Technology, Nanjing 210094, People's Republic of China
| | - Yang Wang
- School of Chemistry and Chemical Engineering, Nanjing University of Science and Technology, Nanjing 210094, People's Republic of China
| | - Xiaohu Qian
- School of Chemistry and Chemical Engineering, Nanjing University of Science and Technology, Nanjing 210094, People's Republic of China
| | - Wei Chen
- School of Chemistry and Chemical Engineering, Nanjing University of Science and Technology, Nanjing 210094, People's Republic of China
| | - Guojin Liang
- Faculty of Materials Science and Engineering, Shenzhen Institute of Advanced Technology, Chinese Academy of Sciences, Shenzhen 518055, People's Republic of China
| | - Jiaoyang Chen
- School of Chemistry and Chemical Engineering, Nanjing University of Science and Technology, Nanjing 210094, People's Republic of China
| | - Jing Zhao
- School of Chemistry and Chemical Engineering, Nanjing University of Science and Technology, Nanjing 210094, People's Republic of China
| | - Wenqi Li
- School of Chemistry and Chemical Engineering, Nanjing University of Science and Technology, Nanjing 210094, People's Republic of China
| | - Tao Chen
- School of Chemistry and Chemical Engineering, Nanjing University of Science and Technology, Nanjing 210094, People's Republic of China
| | - Jiajun Fu
- School of Chemistry and Chemical Engineering, Nanjing University of Science and Technology, Nanjing 210094, People's Republic of China
| |
Collapse
|
38
|
He Y, Xue W, Huang Y, Tang H, Wang G, Zheng D, Xu W, Wang F, Lu X. Boosting the capacity and stability of a MoO 3 cathode via valence regulation and polypyrrole coating for a rechargeable Zn ion battery. RSC Adv 2023; 13:15295-15301. [PMID: 37213338 PMCID: PMC10196885 DOI: 10.1039/d3ra02350h] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/10/2023] [Accepted: 05/12/2023] [Indexed: 05/23/2023] Open
Abstract
Molybdenum trioxide (MoO3) is emerging as a hugely competitive cathode material for aqueous zinc ion batteries (ZIBs) for its high theoretical capacity and electrochemical activity. Nevertheless, owing to its undesirable electronic transport capability and poor structural stability, the practical capacity and cycling performance of MoO3 are yet unsatisfactory, which greatly blocks its commercial use. In this work, we report an effective approach to first synthesise nanosized MoO3-x materials to provide more active specific surface areas, while improving the capacity and cycle life of MoO3 by introducing low valence Mo and coated polypyrrole (PPy). MoO3 nanoparticles with low-valence-state Mo and PPy coating (denoted as MoO3-x@PPy) are synthesized via a solvothermal method and subsequent electrodeposition process. The as-prepared MoO3-x@PPy cathode delivers a high reversible capacity of 212.4 mA h g-1 at 1 A g-1 with good cycling life (more than 75% capacity retention after 500 cycles). In contrast, the original commercial MoO3 sample only obtains a capacity of 99.3 mA h g-1 at 1 A g-1, and a cycling stability of 10% capacity retention over 500 cycles. Additionally, the fabricated Zn//MoO3-x@PPy battery obtains a maximum energy density of 233.6 W h kg-1 and a power density of 11.2 kW kg-1. Our results provide an efficient and practical approach to enhance commercial MoO3 materials as high-performance cathodes for AZIBs.
Collapse
Affiliation(s)
- Yachen He
- School of Applied Physics and Materials, Wuyi University Jiangmen 529020 PR China
| | - Weiwei Xue
- School of Applied Physics and Materials, Wuyi University Jiangmen 529020 PR China
| | - Yifeng Huang
- School of Applied Physics and Materials, Wuyi University Jiangmen 529020 PR China
| | - Hongwei Tang
- School of Applied Physics and Materials, Wuyi University Jiangmen 529020 PR China
| | - Guangxia Wang
- School of Applied Physics and Materials, Wuyi University Jiangmen 529020 PR China
| | - Dezhou Zheng
- School of Applied Physics and Materials, Wuyi University Jiangmen 529020 PR China
| | - Wei Xu
- School of Applied Physics and Materials, Wuyi University Jiangmen 529020 PR China
| | - Fuxin Wang
- School of Applied Physics and Materials, Wuyi University Jiangmen 529020 PR China
| | - Xihong Lu
- School of Applied Physics and Materials, Wuyi University Jiangmen 529020 PR China
- MOE of the Key Laboratory of Bioinorganic and Synthetic Chemistry, The Key Lab of Low-carbon Chem & Energy Conservation of Guangdong Province, School of Chemistry, Sun Yat-Sen University Guangzhou 510275 PR China
| |
Collapse
|
39
|
Zhang J, Huang W, Li L, Chang C, Yang K, Gao L, Pu X. Nonepitaxial Electrodeposition of (002)-Textured Zn Anode on Textureless Substrates for Dendrite-Free and Hydrogen Evolution-Suppressed Zn Batteries. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2023; 35:e2300073. [PMID: 36861496 DOI: 10.1002/adma.202300073] [Citation(s) in RCA: 33] [Impact Index Per Article: 33.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/03/2023] [Revised: 02/16/2023] [Indexed: 05/26/2023]
Abstract
Nontoxic and safe aqueous Zn batteries are largely restricted by the detrimental dendrite growth and hydrogen evolution of Zn metal anode. The (002)-textured Zn electrodeposition, demonstrated as an effective approach for solving these issues, is nevertheless achieved mainly by epitaxial or hetero-epitaxial deposition of Zn on pre-textured substrates. Herein, the electrodeposition of (002)-textured and compact Zn on textureless substrates (commercial Zn, Cu, and Ti foils) at a medium-high galvanostatic current density is reported. According to the systematic investigations on Zn nucleation and growth behaviors, this is ascribed to two reasons: i) the promoted nonepitaxial nucleation of fine horizontal (002) nuclei at increased overpotential and ii) the competitive growth advantages of (002)-orientated nuclei. The resulting freestanding (002)-textured Zn film exhibits significantly suppressed hydrogen evolution and prolonged Zn plating-stripping cycling life, achieving over 2100 mAh cm-2 cumulative capacity under a current density of 10 mA cm-2 and a high depth of discharge (DOD) of 45.5%. Therefore, this study provides both fundamental and practical insights into long-life Zn metal batteries.
Collapse
Affiliation(s)
- Jingmin Zhang
- CAS Center for Excellence in Nanoscience, Beijing Key Laboratory of Micro-Nano Energy and Sensor, Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing, 101400, P. R. China
- School of Nanoscience and Technology, University of Chinese Academy of Sciences, Beijing, 100049, P. R. China
| | - Weiwei Huang
- Beijing Advanced Innovation Center for Materials Genome Engineering, Institute for Advanced Materials and Technology, University of Science and Technology Beijing, Beijing, 100083, P. R. China
| | - Longwei Li
- CAS Center for Excellence in Nanoscience, Beijing Key Laboratory of Micro-Nano Energy and Sensor, Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing, 101400, P. R. China
- School of Nanoscience and Technology, University of Chinese Academy of Sciences, Beijing, 100049, P. R. China
| | - Caiyun Chang
- CAS Center for Excellence in Nanoscience, Beijing Key Laboratory of Micro-Nano Energy and Sensor, Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing, 101400, P. R. China
- Center on Nanoenergy Research, School of Chemistry and Chemical Engineering, School of Physical Science and Technology, Guangxi University, Nanning, 530004, P. R. China
| | - Kai Yang
- CAS Center for Excellence in Nanoscience, Beijing Key Laboratory of Micro-Nano Energy and Sensor, Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing, 101400, P. R. China
- Center on Nanoenergy Research, School of Chemistry and Chemical Engineering, School of Physical Science and Technology, Guangxi University, Nanning, 530004, P. R. China
| | - Lei Gao
- Beijing Advanced Innovation Center for Materials Genome Engineering, Institute for Advanced Materials and Technology, University of Science and Technology Beijing, Beijing, 100083, P. R. China
| | - Xiong Pu
- CAS Center for Excellence in Nanoscience, Beijing Key Laboratory of Micro-Nano Energy and Sensor, Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing, 101400, P. R. China
- School of Nanoscience and Technology, University of Chinese Academy of Sciences, Beijing, 100049, P. R. China
- Center on Nanoenergy Research, School of Chemistry and Chemical Engineering, School of Physical Science and Technology, Guangxi University, Nanning, 530004, P. R. China
| |
Collapse
|
40
|
Fu M, Yu H, Huang S, Li Q, Qu B, Zhou L, Kuang GC, Chen Y, Chen L. Building Sustainable Saturated Fatty Acid-Zinc Interfacial Layer toward Ultra-Stable Zinc Metal Anodes. NANO LETTERS 2023; 23:3573-3581. [PMID: 37042480 DOI: 10.1021/acs.nanolett.3c00741] [Citation(s) in RCA: 15] [Impact Index Per Article: 15.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/19/2023]
Abstract
The commercialization pace of aqueous zinc batteries (AZBs) is seriously limited due to the uncontrolled dendrite growth and severe corrosion reaction of the zinc anode. Herein, a universal and extendable saturated fatty acid-zinc interfacial layer strategy for modulating the interfacial redox process of zinc toward ultrastable Zn metal anodes is proposed. The in situ complexing of saturated fatty acid-zinc interphases could construct an extremely thin zinc compound layer with continuously constructed zincophilic sites which kinetically regulates Zn nucleation and deposition behaviors. Furthermore, the multifunctional interfacial layer with internal hydrophobic carbon chains as a protective layer is efficient to exclude active water molecules from the surface and efficiently inhibit the surface corrosion of zinc. Consequently, the modified anode shows a long cycle life of over 4000 h at 5 mA cm-2. In addition, the assembled Zn||V2O5 full cells based on modified zinc anodes have excellent rate performance and long cycle stability.
Collapse
Affiliation(s)
- Meng Fu
- State Key Laboratory of Powder Metallurgy, Central South University, Changsha, Hunan 410083, People's Republic of China
| | - Huaming Yu
- State Key Laboratory of Powder Metallurgy, Central South University, Changsha, Hunan 410083, People's Republic of China
| | - Shaozhen Huang
- State Key Laboratory of Powder Metallurgy, Central South University, Changsha, Hunan 410083, People's Republic of China
| | - Quanyu Li
- State Key Laboratory of Powder Metallurgy, Central South University, Changsha, Hunan 410083, People's Republic of China
| | - Baihua Qu
- College of Materials Science and Engineering, Chongqing University, Chongqing 400044, People's Republic of China
| | - Liangjun Zhou
- State Key Laboratory of Powder Metallurgy, Central South University, Changsha, Hunan 410083, People's Republic of China
| | - Gui-Chao Kuang
- State Key Laboratory of Powder Metallurgy, Central South University, Changsha, Hunan 410083, People's Republic of China
| | - Yuejiao Chen
- State Key Laboratory of Powder Metallurgy, Central South University, Changsha, Hunan 410083, People's Republic of China
| | - Libao Chen
- State Key Laboratory of Powder Metallurgy, Central South University, Changsha, Hunan 410083, People's Republic of China
| |
Collapse
|
41
|
Zhao L, Li Y, Yu M, Peng Y, Ran F. Electrolyte-Wettability Issues and Challenges of Electrode Materials in Electrochemical Energy Storage, Energy Conversion, and Beyond. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2023:e2300283. [PMID: 37085907 DOI: 10.1002/advs.202300283] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/12/2023] [Revised: 04/02/2023] [Indexed: 05/03/2023]
Abstract
The electrolyte-wettability of electrode materials in liquid electrolytes plays a crucial role in electrochemical energy storage, conversion systems, and beyond relied on interface electrochemical process. However, most electrode materials do not have satisfactory electrolyte-wettability for possibly electrochemical reaction. In the last 30 years, there are a lot of literature have directed at exploiting methods to improve electrolyte-wettability of electrodes, understanding basic electrolyte-wettability mechanisms of electrode materials, exploring the effect of electrolyte-wettability on its electrochemical energy storage, conversion, and beyond performance. This review systematically and comprehensively evaluates the effect of electrolyte-wettability on electrochemical energy storage performance of the electrode materials used in supercapacitors, metal ion batteries, and metal-based batteries, electrochemical energy conversion performance of the electrode materials used in fuel cells and electrochemical water splitting systems, as well as capacitive deionization performance of the electrode materials used in capacitive deionization systems. Finally, the challenges in approaches for improving electrolyte-wettability of electrode materials, characterization techniques of electrolyte-wettability, as well as electrolyte-wettability of electrode materials applied in special environment and other electrochemical systems with electrodes and liquid electrolytes, which gives future possible directions for constructing interesting electrolyte-wettability to meet the demand of high electrochemical performance, are also discussed.
Collapse
Affiliation(s)
- Lei Zhao
- State Key Laboratory of Advanced Processing and Recycling of Non-ferrous Metals, Department of Polymeric Materials Science and Engineering, School of Materials Science and Engineering, Lanzhou University of Technology, Lanzhou, Gansu, 730050, P. R. China
| | - Yuan Li
- State Key Laboratory of Advanced Processing and Recycling of Non-ferrous Metals, Department of Polymeric Materials Science and Engineering, School of Materials Science and Engineering, Lanzhou University of Technology, Lanzhou, Gansu, 730050, P. R. China
| | - Meimei Yu
- State Key Laboratory of Advanced Processing and Recycling of Non-ferrous Metals, Department of Polymeric Materials Science and Engineering, School of Materials Science and Engineering, Lanzhou University of Technology, Lanzhou, Gansu, 730050, P. R. China
| | - Yuanyou Peng
- State Key Laboratory of Advanced Processing and Recycling of Non-ferrous Metals, Department of Polymeric Materials Science and Engineering, School of Materials Science and Engineering, Lanzhou University of Technology, Lanzhou, Gansu, 730050, P. R. China
| | - Fen Ran
- State Key Laboratory of Advanced Processing and Recycling of Non-ferrous Metals, Department of Polymeric Materials Science and Engineering, School of Materials Science and Engineering, Lanzhou University of Technology, Lanzhou, Gansu, 730050, P. R. China
| |
Collapse
|
42
|
Loh JR, Xue J, Lee WSV. Challenges and Strategies in the Development of Zinc-Ion Batteries. SMALL METHODS 2023:e2300101. [PMID: 37035953 DOI: 10.1002/smtd.202300101] [Citation(s) in RCA: 5] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/27/2023] [Revised: 03/10/2023] [Indexed: 06/19/2023]
Abstract
Although promising, the practical use of zinc-ion batteries (ZIBs) remains plagued with uncontrollable dendrite growth, parasitic side reactions, and the high intercalation energy of divalent Zn2+ ions. Hence, much work has been conducted to alleviate these issues to maximize the energy density and cyclic life of the cell. In this holistic review, the mechanisms and rationale for the stated challenges shall be summarized, followed by the corresponding strategies employed to mitigate them. Thereafter, a perspective on present research and the outlook of ZIBs would be put forth in hopes to enhance their electrochemical properties in a multipronged approach.
Collapse
Affiliation(s)
- Jiong Rui Loh
- Department of Materials Science and Engineering, National University of Singapore, Singapore, 117575, Singapore
| | - Junmin Xue
- Department of Materials Science and Engineering, National University of Singapore, Singapore, 117575, Singapore
| | - Wee Siang Vincent Lee
- Department of Materials Science and Engineering, National University of Singapore, Singapore, 117575, Singapore
| |
Collapse
|
43
|
Lu H, Zhang D, Jin Q, Zhang Z, Lyu N, Zhu Z, Duan C, Qin Y, Jin Y. Gradient Electrolyte Strategy Achieving Long-Life Zinc Anodes. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2023:e2300620. [PMID: 36946149 DOI: 10.1002/adma.202300620] [Citation(s) in RCA: 8] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/19/2023] [Revised: 03/07/2023] [Indexed: 05/16/2023]
Abstract
Aqueous Zn-ion batteries are plagued by a short lifespan caused by localized dendrites. High-concentration electrolytes are favorable for dense Zn deposition but have poor performance in batteries with glass-fiber separators. In contrast, low-concentration electrolytes can wet the separators well, ensuring the migration of zinc ions, but the dendrites grow rapidly. In this work, we propose an electrolyte gradient strategy wherein a zinc-ion concentration gradient is established from the anode to the separator, ensuring that the separator keeps a good wettability in low-concentration areas and the zinc anode achieves dendrite-free deposition in a high-concentration area. By using this strategy in a common electrolyte, zinc sulfate, a Zn||Zn symmetric cell achieves 14 000 ultralong cycles (exceeding 8 months) at 5 mA cm-2 and 1 mAh cm-2 . When the current is further increased to 20 mA cm-2 , the symmetric cell could still run for over 10 000 cycles. Assembled Zn||NVO full cells also demonstrate prominent performance. At a high current of 16 mA cm-2 , the NVO cathode with high loading (8 mg cm-2 ) still has a capacity of 58% after 1200 cycles. Overall, the gradient electrolyte strategy provides a promising approach for practical long-life Zn anodes with the advantages of simple operation and low cost.
Collapse
Affiliation(s)
- Hongfei Lu
- Research Center of Grid Energy Storage and Battery Application, School of Electrical and Information Engineering, Zhengzhou University, Zhengzhou, Henan, 450001, China
| | - Di Zhang
- Research Center of Grid Energy Storage and Battery Application, School of Electrical and Information Engineering, Zhengzhou University, Zhengzhou, Henan, 450001, China
| | - Qianzheng Jin
- Research Center of Grid Energy Storage and Battery Application, School of Electrical and Information Engineering, Zhengzhou University, Zhengzhou, Henan, 450001, China
| | - Zili Zhang
- Research Center of Grid Energy Storage and Battery Application, School of Electrical and Information Engineering, Zhengzhou University, Zhengzhou, Henan, 450001, China
| | - Nawei Lyu
- Research Center of Grid Energy Storage and Battery Application, School of Electrical and Information Engineering, Zhengzhou University, Zhengzhou, Henan, 450001, China
| | - Zhenjie Zhu
- Research Center of Grid Energy Storage and Battery Application, School of Electrical and Information Engineering, Zhengzhou University, Zhengzhou, Henan, 450001, China
| | - Chenxu Duan
- Research Center of Grid Energy Storage and Battery Application, School of Electrical and Information Engineering, Zhengzhou University, Zhengzhou, Henan, 450001, China
| | - Yi Qin
- Research Center of Grid Energy Storage and Battery Application, School of Electrical and Information Engineering, Zhengzhou University, Zhengzhou, Henan, 450001, China
| | - Yang Jin
- Research Center of Grid Energy Storage and Battery Application, School of Electrical and Information Engineering, Zhengzhou University, Zhengzhou, Henan, 450001, China
| |
Collapse
|
44
|
Jiao M, Dai L, Ren HR, Zhang M, Xiao X, Wang B, Yang J, Liu B, Zhou G, Cheng HM. A Polarized Gel Electrolyte for Wide-Temperature Flexible Zinc-Air Batteries. Angew Chem Int Ed Engl 2023; 62:e202301114. [PMID: 36869006 DOI: 10.1002/anie.202301114] [Citation(s) in RCA: 13] [Impact Index Per Article: 13.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/21/2023] [Revised: 03/02/2023] [Accepted: 03/03/2023] [Indexed: 03/05/2023]
Abstract
The development of flexible zinc-air batteries (FZABs) has attracted broad attention in the field of wearable electronic devices. Gel electrolyte is one of the most important components in FZABs, which is urgent to be optimized to match with Zn anode and adapt to severe climates. In this work, a polarized gel electrolyte of polyacrylamide-sodium citric (PAM-SC) is designed for FZABs, in which the SC molecules contain large amount of polarized -COO- functional groups. The polarized -COO- groups can form an electrical field between gel electrolyte and Zn anode to suppress Zn dendrite growth. Besides, the -COO- groups in PAM-SC can fix H2 O molecules, which prevents water from freezing and evaporating. The polarized PAM-SC hydrogel delivers a high ionic conductivity of 324.68 mS cm-1 and water retention of 96.85 % after being exposed for 96 h. FZABs with the PAM-SC gel electrolyte exhibit long cycling life of 700 cycles at -40 °C, showing the application prospect under extreme conditions.
Collapse
Affiliation(s)
- Miaolun Jiao
- Tsinghua Shenzhen International Graduate School, Tsinghua University, Shenzhen, 518055, China
| | - Lixin Dai
- Tsinghua Shenzhen International Graduate School, Tsinghua University, Shenzhen, 518055, China
| | - Hong-Rui Ren
- Tsinghua Shenzhen International Graduate School, Tsinghua University, Shenzhen, 518055, China
- College of Materials Science and Engineering, Shenzhen University, Shenzhen, 518060, China
| | - Mengtian Zhang
- Tsinghua Shenzhen International Graduate School, Tsinghua University, Shenzhen, 518055, China
| | - Xiao Xiao
- Tsinghua Shenzhen International Graduate School, Tsinghua University, Shenzhen, 518055, China
| | - Boran Wang
- Tsinghua Shenzhen International Graduate School, Tsinghua University, Shenzhen, 518055, China
| | - Jinlong Yang
- College of Materials Science and Engineering, Shenzhen University, Shenzhen, 518060, China
| | - Bilu Liu
- Tsinghua Shenzhen International Graduate School, Tsinghua University, Shenzhen, 518055, China
| | - Guangmin Zhou
- Tsinghua Shenzhen International Graduate School, Tsinghua University, Shenzhen, 518055, China
| | - Hui-Ming Cheng
- Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang, 110016, China
- Institute of Technology for Carbon Neutrality, Faculty of Materials Science and Energy Engineering, Shenzhen Institute of Advanced Technology, Chinese Academy of Sciences, Shenzhen, 518055, China
| |
Collapse
|
45
|
Gou Q, Luo H, Zhang Q, Deng J, Zhao R, Odunmbaku O, Wang L, Li L, Zheng Y, Li J, Chao D, Li M. Electrolyte Regulation of Bio-Inspired Zincophilic Additive toward High-Performance Dendrite-Free Aqueous Zinc-Ion Batteries. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2023; 19:e2207502. [PMID: 36650991 DOI: 10.1002/smll.202207502] [Citation(s) in RCA: 32] [Impact Index Per Article: 32.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/01/2022] [Revised: 12/20/2022] [Indexed: 06/17/2023]
Abstract
Aqueous zinc-ion batteries hold attractive potential for large-scale energy storage devices owing to their prominent electrochemical performance and high security. Nevertheless, the applications of aqueous electrolytes have generated various challenges, including uncontrolled dendrite growth and parasitic reactions, thereby deteriorating the Zn anode's stability. Herein, inspired by the superior affinity between Zn2+ and amino acid chains in the zinc finger protein, a cost-effective and green glycine additive is incorporated into aqueous electrolytes to stabilize the Zn anode. As confirmed by experimental characterizations and theoretical calculations, the glycine additives can not only reorganize the solvation sheaths of hydrated Zn2+ via partial substitution of coordinated H2 O but also preferentially adsorb onto the Zn anode, thereby significantly restraining dendrite growth and interfacial side reactions. Accordingly, the Zn anode could realize a long lifespan of over 2000 h and enhanced reversibility (98.8%) in the glycine-containing electrolyte. Furthermore, the assembled Zn||α-MnO2 full cells with glycine-modified electrolyte also delivers substantial capacity retention (82.3% after 1000 cycles at 2 A g-1 ), showing promising application prospects. This innovative bio-inspired design concept would inject new vitality into the development of aqueous electrolytes.
Collapse
Affiliation(s)
- Qianzhi Gou
- MOE Key Laboratory of Low-grade Energy Utilization Technologies and Systems, CQU-NUS Renewable Energy Materials & Devices Joint Laboratory, School of Energy & Power Engineering, Chongqing University, Chongqing, 400044, P. R. China
| | - Haoran Luo
- MOE Key Laboratory of Low-grade Energy Utilization Technologies and Systems, CQU-NUS Renewable Energy Materials & Devices Joint Laboratory, School of Energy & Power Engineering, Chongqing University, Chongqing, 400044, P. R. China
| | - Qi Zhang
- MOE Key Laboratory of Low-grade Energy Utilization Technologies and Systems, CQU-NUS Renewable Energy Materials & Devices Joint Laboratory, School of Energy & Power Engineering, Chongqing University, Chongqing, 400044, P. R. China
| | - Jiangbin Deng
- MOE Key Laboratory of Low-grade Energy Utilization Technologies and Systems, CQU-NUS Renewable Energy Materials & Devices Joint Laboratory, School of Energy & Power Engineering, Chongqing University, Chongqing, 400044, P. R. China
| | - Ruizheng Zhao
- Laboratory of Advanced Materials, Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials, School of Chemistry and Materials, Fudan University, Shanghai, 200433, P. R. China
| | - Omololu Odunmbaku
- MOE Key Laboratory of Low-grade Energy Utilization Technologies and Systems, CQU-NUS Renewable Energy Materials & Devices Joint Laboratory, School of Energy & Power Engineering, Chongqing University, Chongqing, 400044, P. R. China
| | - Lei Wang
- MOE Key Laboratory of Low-grade Energy Utilization Technologies and Systems, CQU-NUS Renewable Energy Materials & Devices Joint Laboratory, School of Energy & Power Engineering, Chongqing University, Chongqing, 400044, P. R. China
| | - Lingjie Li
- Chemistry and Chemical Engineering, Chongqing University, Chongqing, 400044, P. R. China
| | - Yujie Zheng
- MOE Key Laboratory of Low-grade Energy Utilization Technologies and Systems, CQU-NUS Renewable Energy Materials & Devices Joint Laboratory, School of Energy & Power Engineering, Chongqing University, Chongqing, 400044, P. R. China
| | - Jun Li
- MOE Key Laboratory of Low-grade Energy Utilization Technologies and Systems, CQU-NUS Renewable Energy Materials & Devices Joint Laboratory, School of Energy & Power Engineering, Chongqing University, Chongqing, 400044, P. R. China
| | - Dongliang Chao
- Laboratory of Advanced Materials, Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials, School of Chemistry and Materials, Fudan University, Shanghai, 200433, P. R. China
| | - Meng Li
- MOE Key Laboratory of Low-grade Energy Utilization Technologies and Systems, CQU-NUS Renewable Energy Materials & Devices Joint Laboratory, School of Energy & Power Engineering, Chongqing University, Chongqing, 400044, P. R. China
| |
Collapse
|
46
|
Yang X, Li W, Chen Z, Tian M, Peng J, Luo J, Su Y, Zou Y, Weng G, Shao Y, Dou S, Sun J. Synchronous Dual Electrolyte Additive Sustains Zn Metal Anode with 5600 h Lifespan. Angew Chem Int Ed Engl 2023; 62:e202218454. [PMID: 36624050 DOI: 10.1002/anie.202218454] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/14/2022] [Revised: 01/07/2023] [Accepted: 01/09/2023] [Indexed: 01/11/2023]
Abstract
Despite conspicuous merits of Zn metal anodes, the commercialization is still handicapped by rampant dendrite formation and notorious side reaction. Manipulating the nucleation mode and deposition orientation of Zn is a key to rendering stabilized Zn anodes. Here, a dual electrolyte additive strategy is put forward via the direct cooperation of xylitol (XY) and graphene oxide (GO) species into typical zinc sulfate electrolyte. As verified by molecular dynamics simulations, the incorporated XY molecules could regulate the solvation structure of Zn2+ , thus inhibiting hydrogen evolution and side reactions. The self-assembled GO layer is in favor of facilitating the desolvation process to accelerate reaction kinetics. Progressive nucleation and orientational deposition can be realized under the synergistic modulation, enabling a dense and uniform Zn deposition. Consequently, symmetric cell based on dual additives harvests a highly reversible cycling of 5600 h at 1.0 mA cm-2 /1.0 mAh cm-2 .
Collapse
Affiliation(s)
- Xianzhong Yang
- College of Energy, Soochow Institute for Energy and Materials Innovations, Jiangsu Provincial Key Laboratory for Advanced Carbon Materials and Wearable Energy Technologies, Soochow University, Suzhou, 215006, P. R. China
| | - Weiping Li
- College of Energy, Soochow Institute for Energy and Materials Innovations, Jiangsu Provincial Key Laboratory for Advanced Carbon Materials and Wearable Energy Technologies, Soochow University, Suzhou, 215006, P. R. China
| | - Ziyan Chen
- College of Energy, Soochow Institute for Energy and Materials Innovations, Jiangsu Provincial Key Laboratory for Advanced Carbon Materials and Wearable Energy Technologies, Soochow University, Suzhou, 215006, P. R. China
| | - Meng Tian
- Interdisciplinary Center for Fundamental and Frontier Sciences, Nanjing University of Science and Technology, Nan Jing Shi, Jiangyin, 214443, P. R. China
| | - Jun Peng
- Center for Hybrid Nanostructures, Universität Hamburg, 22761, Hamburg, Germany
| | - Jinrong Luo
- College of Energy, Soochow Institute for Energy and Materials Innovations, Jiangsu Provincial Key Laboratory for Advanced Carbon Materials and Wearable Energy Technologies, Soochow University, Suzhou, 215006, P. R. China
| | - Yiwen Su
- College of Energy, Soochow Institute for Energy and Materials Innovations, Jiangsu Provincial Key Laboratory for Advanced Carbon Materials and Wearable Energy Technologies, Soochow University, Suzhou, 215006, P. R. China
| | - Yuhan Zou
- College of Energy, Soochow Institute for Energy and Materials Innovations, Jiangsu Provincial Key Laboratory for Advanced Carbon Materials and Wearable Energy Technologies, Soochow University, Suzhou, 215006, P. R. China
| | - Gao Weng
- College of Energy, Soochow Institute for Energy and Materials Innovations, Jiangsu Provincial Key Laboratory for Advanced Carbon Materials and Wearable Energy Technologies, Soochow University, Suzhou, 215006, P. R. China
| | - Yuanlong Shao
- School of Materials Science and Engineering, Peking University, Beijing, 100871, P. R. China
| | - Shixue Dou
- Institute for Superconducting and Electronic Materials, University of Wollongong, Wollongong, New South Wales, 2522, Australia
| | - Jingyu Sun
- College of Energy, Soochow Institute for Energy and Materials Innovations, Jiangsu Provincial Key Laboratory for Advanced Carbon Materials and Wearable Energy Technologies, Soochow University, Suzhou, 215006, P. R. China
| |
Collapse
|
47
|
Wang H, Ye W, Yin B, Wang K, Riaz MS, Xie BB, Zhong Y, Hu Y. Modulating Cation Migration and Deposition with Xylitol Additive and Oriented Reconstruction of Hydrogen Bonds for Stable Zinc Anodes. Angew Chem Int Ed Engl 2023; 62:e202218872. [PMID: 36647214 DOI: 10.1002/anie.202218872] [Citation(s) in RCA: 32] [Impact Index Per Article: 32.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/21/2022] [Revised: 01/16/2023] [Accepted: 01/16/2023] [Indexed: 01/18/2023]
Abstract
Highly reversible plating/stripping in aqueous electrolytes is one of the critical processes determining the performance of Zn-ion batteries, but it is severely impeded by the parasitic side reaction and dendrite growth. Herein, a novel electrolyte engineering strategy is first proposed based on the usage of 100 mM xylitol additive, which inhibits hydrogen evolution reaction and accelerates cations migration by expelling active H2 O molecules and weakening electrostatic interaction through oriented reconstruction of hydrogen bonds. Concomitantly, xylitol molecules are preferentially adsorbed by Zn surface, which provides a shielding buffer layer to retard the sedimentation and suppress the planar diffusion of Zn2+ ions. Zn2+ transference number and cycling lifespan of Zn∥Zn cells have been significantly elevated, overwhelmingly larger than bare ZnSO4 . The cell coupled with a NaV3 O8 cathode still behaves much better than the additive-free device in terms of capacity retention.
Collapse
Affiliation(s)
- Hongfei Wang
- Key Laboratory of the Ministry of Education for Advanced Catalysis Materials, Department of Chemistry, Zhejiang Normal University, Jinhua, 321004, P. R. China
| | - Wuquan Ye
- Key Laboratory of the Ministry of Education for Advanced Catalysis Materials, Department of Chemistry, Zhejiang Normal University, Jinhua, 321004, P. R. China
| | - Bowen Yin
- Hangzhou Institute of Advanced Studies, Zhejiang Normal University, Hangzhou, 311231, P. R. China
| | - Kexin Wang
- Hangzhou Institute of Advanced Studies, Zhejiang Normal University, Hangzhou, 311231, P. R. China
| | - Muhammad Sohail Riaz
- Key Laboratory of the Ministry of Education for Advanced Catalysis Materials, Department of Chemistry, Zhejiang Normal University, Jinhua, 321004, P. R. China
| | - Bin-Bin Xie
- Hangzhou Institute of Advanced Studies, Zhejiang Normal University, Hangzhou, 311231, P. R. China
| | - Yijun Zhong
- Key Laboratory of the Ministry of Education for Advanced Catalysis Materials, Department of Chemistry, Zhejiang Normal University, Jinhua, 321004, P. R. China
| | - Yong Hu
- Key Laboratory of the Ministry of Education for Advanced Catalysis Materials, Department of Chemistry, Zhejiang Normal University, Jinhua, 321004, P. R. China.,Hangzhou Institute of Advanced Studies, Zhejiang Normal University, Hangzhou, 311231, P. R. China
| |
Collapse
|
48
|
Lu H, Hu J, Zhang Y, Zhang K, Yan X, Li H, Li J, Li Y, Zhao J, Xu B. 3D Cold-Trap Environment Printing for Long-Cycle Aqueous Zn-Ion Batteries. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2023; 35:e2209886. [PMID: 36515180 DOI: 10.1002/adma.202209886] [Citation(s) in RCA: 12] [Impact Index Per Article: 12.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/26/2022] [Revised: 12/04/2022] [Indexed: 06/17/2023]
Abstract
Zn powder (Zn-P)-based anodes are always regarded as ideal anode candidates for zinc ion batteries owing to their low cost and ease of processing. However, the intrinsic negative properties of Zn-P-based anodes such as easy corrosion and uncontrolled dendrite growth have limited their further applications. Herein, a novel 3D cold-trap environment printing (3DCEP) technology is proposed to achieve the MXene and Zn-P (3DCEP-MXene/Zn-P) anode with highly ordered arrangement. Benefitting from the unique inhibition mechanism of high lattice matching and physical confinement effects within the 3DCEP-MXene/Zn-P anode, it can effectively homogenize the Zn2+ flux and alleviate the Zn deposition rate of the 3DCEP-MXene/Zn-P anode during Zn plating-stripping. Consequently, the 3DCEP-MXene/Zn-P anode exhibits a superior cycling lifespan of 1400 h with high coulombic efficiency of ≈9.2% in symmetric batteries. More encouragingly, paired with MXene and Co doped MnHCF cathode via 3D cold-trap environment printing (3 DCEP-MXene/Co-MnHCF), the 3DCEP-MXene/Zn-P//3DCEP-MXene/Co-MnHCF full battery delivers high cyclic durability with the capacity retention of 95.7% after 1600 cycles. This study brings an inspired universal pathway to rapidly fabricate a reversible Zn anode with highly ordered arrangement in a cold environment for micro-zinc storage systems.
Collapse
Affiliation(s)
- Hongyu Lu
- State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin, 150001, P. R. China
| | - Jisong Hu
- School of Materials Science and Engineering, Harbin Institute of Technology (Weihai), Weihai, 264209, P. R. China
- School of Optical and Electronic Information, Huazhong University of Science and Technology, Wuhan, 430074, P. R. China
| | - Yan Zhang
- Key Laboratory of Functional Polymer Materials and State Key Laboratory of Medicinal Chemical Biology, Institute of Polymer Chemistry, College of Chemistry, Nankai University, Tianjin, 300071, P. R. China
| | - Kaiqi Zhang
- School of Materials Science and Engineering, Harbin Institute of Technology (Weihai), Weihai, 264209, P. R. China
| | - Xiaoying Yan
- School of Materials Science and Engineering, Harbin Institute of Technology (Weihai), Weihai, 264209, P. R. China
| | - Heqi Li
- School of Materials Science and Engineering, Harbin Institute of Technology (Weihai), Weihai, 264209, P. R. China
| | - Jianzhu Li
- State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin, 150001, P. R. China
| | - Yujie Li
- State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin, 150001, P. R. China
- School of Materials Science and Engineering, Harbin Institute of Technology (Weihai), Weihai, 264209, P. R. China
| | - Jingxin Zhao
- Nanotechnology Center, School of Fashion and Textiles, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong, 999077, P. R. China
| | - Bingang Xu
- Nanotechnology Center, School of Fashion and Textiles, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong, 999077, P. R. China
| |
Collapse
|
49
|
Wei T, Ren Y, Wang Y, Mo L, Li Z, Zhang H, Hu L, Cao G. Addition of Dioxane in Electrolyte Promotes (002)-Textured Zinc Growth and Suppressed Side Reactions in Zinc-Ion Batteries. ACS NANO 2023; 17:3765-3775. [PMID: 36752806 DOI: 10.1021/acsnano.2c11516] [Citation(s) in RCA: 39] [Impact Index Per Article: 39.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/18/2023]
Abstract
The reversibility and cyclability of aqueous zinc-ion batteries (ZIBs) are largely determined by the stabilization of the Zn anode. Therefore, a stable anode/electrolyte interface capable of inhibiting dendrites and side reactions is crucial for high-performing ZIBs. In this study, we investigated the adsorption of 1,4-dioxane (DX) to promote the exposure of Zn (002) facets and prevent dendrite growth. DX appears to reside at the interface and suppress the detrimental side reactions. ZIBs with the addition of DX demonstrated a long-term cycling stability of 1000 h in harsh conditions of 10 mA cm-2 with an ultrahigh cumulative plated capacity of 5 Ah cm-2 and shows a good reversibility with an average Coulombic efficiency of 99.7%. The Zn//NH4V4O10 full battery with DX achieves a high specific capacity (202 mAh g-1 at 5 A g-1) and capacity retention (90.6% after 5000 cycles), much better than that of ZIBs with the pristine ZnSO4 electrolyte. By selectively adjusting the Zn2+ deposition rate on the crystal facets with adsorbed molecules, this work provides a promising modulation strategy at the molecular level for high-performing Zn anodes and can potentially be applied to other metal anodes suffering from instability and irreversibility.
Collapse
Affiliation(s)
- Tingting Wei
- Key Laboratory of Photovoltaic and Energy Conservation Materials, CAS, Institute of Solid State Physics, Hefei Institutes of Physical Science, Chinese Academy of Sciences, Hefei, Anhui 230031, P.R. China
- University of Science and Technology of China, Hefei, Anhui 230026, P.R. China
| | - Yingke Ren
- College of Science, Hebei University of Science and Technology, Shijiazhuang 050018, P.R. China
| | - Yifan Wang
- Key Laboratory of Photovoltaic and Energy Conservation Materials, CAS, Institute of Solid State Physics, Hefei Institutes of Physical Science, Chinese Academy of Sciences, Hefei, Anhui 230031, P.R. China
- University of Science and Technology of China, Hefei, Anhui 230026, P.R. China
| | - Li'e Mo
- Key Laboratory of Photovoltaic and Energy Conservation Materials, CAS, Institute of Solid State Physics, Hefei Institutes of Physical Science, Chinese Academy of Sciences, Hefei, Anhui 230031, P.R. China
- University of Science and Technology of China, Hefei, Anhui 230026, P.R. China
| | - Zhaoqian Li
- Key Laboratory of Photovoltaic and Energy Conservation Materials, CAS, Institute of Solid State Physics, Hefei Institutes of Physical Science, Chinese Academy of Sciences, Hefei, Anhui 230031, P.R. China
| | - Hong Zhang
- Hebei Computational Optical Imaging and Photoelectric Detection Technology Innovation Center, Hebei International Joint Research Center for Computational Optical Imaging and Intelligent Sensing, School of Mathematics and Physics Science and Engineering, Hebei University of Engineering, Handan, Hebei 056038, P.R. China
| | - Linhua Hu
- Key Laboratory of Photovoltaic and Energy Conservation Materials, CAS, Institute of Solid State Physics, Hefei Institutes of Physical Science, Chinese Academy of Sciences, Hefei, Anhui 230031, P.R. China
- University of Science and Technology of China, Hefei, Anhui 230026, P.R. China
| | - Guozhong Cao
- Department of Materials Science and Engineering, University of Washington, Seattle, Washington 98195, United States
| |
Collapse
|
50
|
Nie W, Cheng H, Sun Q, Liang S, Lu X, Lu B, Zhou J. Design Strategies toward High-Performance Zn Metal Anode. SMALL METHODS 2023:e2201572. [PMID: 36840645 DOI: 10.1002/smtd.202201572] [Citation(s) in RCA: 20] [Impact Index Per Article: 20.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/27/2022] [Revised: 01/02/2023] [Indexed: 06/18/2023]
Abstract
Rechargeable aqueous Zn-ion batteries (AZIBs) are one of the most promising alternatives for traditional energy-storage devices because of their low cost, abundant resources, environmental friendliness, and inherent safety. However, several detrimental issues with Zn metal anodes including Zn dendrite formation, hydrogen evolution, corrosion and passivation, should be considered when designing advanced AZIBs. Moreover, these thorny issues are not independent but mutually reinforcing, covering many technical and processing parameters. Therefore, it is necessary to comprehensively summarize the issues facing Zn anodes and the corresponding strategies to develop roadmaps for the development of high-performance Zn anodes. Herein, the failure mechanisms of Zn anodes and their corresponding impacts are outlined. Recent progress on improving the stability of Zn anode is summarized, including structurally designed Zn anodes, Zn alloy anodes, surface modification, electrolyte optimization, and separator design. Finally, this review provides brilliant and insightful perspectives for stable Zn metal anodes and promotes the large-scale application of AZIBs in power grid systems.
Collapse
Affiliation(s)
- Wei Nie
- State Key Laboratory of Advanced Special Steel & School of Materials Science and Engineering, Shanghai University, Shanghai, 200444, China
| | - Hongwei Cheng
- State Key Laboratory of Advanced Special Steel & School of Materials Science and Engineering, Shanghai University, Shanghai, 200444, China
| | - Qiangchao Sun
- State Key Laboratory of Advanced Special Steel & School of Materials Science and Engineering, Shanghai University, Shanghai, 200444, China
| | - Shuquan Liang
- School of Materials Science and Engineering, Hunan Provincial Key Laboratory of Electronic Packaging and Advanced Functional Materials, Central South University, Changsha, 410083, China
| | - Xionggang Lu
- State Key Laboratory of Advanced Special Steel & School of Materials Science and Engineering, Shanghai University, Shanghai, 200444, China
| | - Bingan Lu
- School of Physics and Electronics, Hunan University, Changsha, 410082, China
| | - Jiang Zhou
- School of Materials Science and Engineering, Hunan Provincial Key Laboratory of Electronic Packaging and Advanced Functional Materials, Central South University, Changsha, 410083, China
| |
Collapse
|