Synergizing Hydrogen Spillover and Deprotonation by the Internal Polarization Field in a MoS2 /NiPS3 Vertical Heterostructure for Boosted Water Electrolysis

The interfacial synergy of hierarchical FeCoNiP@FeNi-LDH heterojunction for efficient alkaline water splitting

In response to the growing demand for clean, green, and sustainable energy sources, the development of cost-effective and durable high-activity overall water splitting electrocatalysts is urgently needed. In this study, the heterogeneous structure formed by the combination of FeCoNiP and FeNi-LDH was homogeneously dispersed onto CuO nanowires generated by in-situ oxidation of copper foam as a substrate using an electrodeposition method. This multilevel structure exhibits excellent bifunctional properties as an electrode material in alkaline solutions, for the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER) only 206 mV and 147 mV overpotentials are needed to achieve a current density of 100 mA cm-2 respectively. Full water electrolysis is thus enabled to take place at such a low cell voltage as 1.64 V to reach the current density of 100 mA cm-2, which exhibits a long-term stability of 30 h. These improved electrocatalytic performances stem from the construction of multilevel structures. The X-ray photoelectron spectroscopy suggests that strong electron transfer occurs between heterogeneous structures, thus facilitating the OER and HER process. The dispersion of CuO nanowires not only increases the electrochemically active surface areas but also improves the overall hydrophilic and aerophobic properties. This work highlights the positive effect of multilevel structure in the design of more efficient electrocatalysts and provides a reference for the preparation of other low-cost, high-activity bifunctional electrocatalysts.

First synthesis of RuSn solid-solution alloy nanoparticles and their enhanced hydrogen evolution reaction activity

Solid-solution alloys based on platinum group metals and p-block metals have attracted much attention due to their promising potential as materials with a continuously fine-tunable electronic structure. Here, we report on the first synthesis of novel solid-solution RuSn alloy nanoparticles (NPs) by electrochemical cyclic voltammetry sweeping of RuSn@SnOx NPs. High-angle annular dark-field scanning transmission electron microscopy and energy-dispersive X-ray spectroscopy maps confirmed the random and homogeneous distribution of Ru and Sn elements in the alloy NPs. Compared with monometallic Ru NPs, the RuSn alloy NPs showed improved hydrogen evolution reaction (HER) performance. The overpotentials of Ru0.94Sn0.06 NPs/C and Ru0.87Sn0.13 NPs/C to achieve a current density of 10 mA cm-2 were 43.41 and 33.19 mV, respectively, which are lower than those of monometallic Ru NPs/C (53.53 mV) and commercial Pt NPs/C (55.77 mV). The valence-band structures of the NPs investigated by hard X-ray photoelectron spectroscopy demonstrated that the d-band centre of RuSn NPs shifted downward compared with that of Ru NPs. X-ray photoelectron spectroscopy and X-ray absorption near-edge structure analyses indicated that in the RuSn alloy NPs, charge transfer occurs from Sn to Ru, which was considered to result in a downward shift of the d-band centre in RuSn NPs and to regulate the adsorption energy of intermediate Hads effectively, and thus enable the RuSn solid-solution alloy NPs to exhibit excellent HER catalytic properties.

Efficient Charge Separation in Ag/PCN/UPDI Ternary Heterojunction for Optimized Photothermal-Photocatalytic Performance via Tandem Electric Fields

Charge separation driven by the internal electric field is a research hotspot in photocatalysis. However, it remains challenging to accurately control the electric field to continuously accelerate the charge transfer. Herein, a strategy of constructing a tandem electric field to continuously accelerate charge transfer in photocatalysts is proposed. The plasma electric field, interface electric field, and intramolecular electric field are integrated into the Ag/g-C3N4/urea perylene imide (Ag/PCN/UPDI) ternary heterojunction to achieve faster charge separation and longer carrier lifetime. The triple electric fields function as three accelerators on the charge transport path, promoting the separation of electron-hole pairs, accelerating charge transfer, enhancing light absorption, and increasing the concentration of energetic electrons on the catalyst. The H2 evolution rate of Ag/PCN/UPDI is 16.8 times higher than that of pristine PDI, while the degradation rate of oxytetracycline is increased by 4.5 times. This new strategy will provide a groundbreaking idea for the development of high-efficiency photocatalysts.

Molten-Salt Electrochemical Preparation of Co2B/MoB2 Heterostructured Nanoclusters for Boosted pH-Universal Hydrogen Evolution

Boosting the hydrogen evolution reaction (HER) activity of α-MoB2 at large current densities and in pH-universal medium is significant for efficient hydrogen production. In this work, Co2B/MoB2 heterostructured nanoclusters are prepared by molten-salt electrolysis (MSE) and then used as a HER catalyst. The composition, structure, and morphology of Co2B/MoB2 can be modulated by altering the stoichiometries of raw materials and synthesis temperatures. Impressively, the obtained Co2B/MoB2 at optimized conditions exhibits a low overpotential of 297 and 304 mV at 500 mA cm-2 in 0.5 m H2SO4 and 1 m KOH, respectively. Moreover, the Co2B/MoB2 catalyst possesses a long-term catalytic stability of over 190 h in both acidic and alkaline medium. The excellent HER performance is due to the modified electronic structure at the Co2B/MoB2 heterointerface where electrons are accumulated at the Mo sites to strengthen the H adsorption. Density functional theory (DFT) calculations reveal that the formation of the Co2B/MoB2 heterointerface decreases the H adsorption and H2O dissociation free energies, contributing to the boosted HER intrinsic catalytic activity of Co2B/MoB2. Overall, this work provides an experimental and theoretical paradigm for the design of efficient pH-universal boride heterostructure electrocatalysts.

Heterojunction-Induced Rapid Transformation of Ni3+/Ni2+ Sites which Mediates Urea Oxidation for Energy-Efficient Hydrogen Production

Water electrolysis is an environmentally-friendly strategy for hydrogen production but suffers from significant energy consumption. Substituting urea oxidation reaction (UOR) with lower theoretical voltage for water oxidation reaction adopting nickel-based electrocatalysts engenders reduced energy consumption for hydrogen production. The main obstacle remains strong interaction between accumulated Ni3+ and *COO in the conventional Ni3+-catalyzing pathway. Herein, a novel Ni3+/Ni2+ mediated pathway for UOR via constructing a heterojunction of nickel metaphosphate and nickel telluride (Ni2P4O12/NiTe), which efficiently lowers the energy barrier of UOR and avoids the accumulation of Ni3+ and excessive adsorption of *COO on the electrocatalysts, is developed. As a result, Ni2P4O12/NiTe demonstrates an exceptionally low potential of 1.313 V to achieve a current density of 10 mA cm-2 toward efficient urea oxidation reaction while simultaneously showcases an overpotential of merely 24 mV at 10 mA cm-2 for hydrogen evolution reaction. Constructing urea electrolysis electrolyzer using Ni2P4O12/NiTe at both sides attains 100 mA cm-2 at a low cell voltage of 1.475 V along with excellent stability over 500 h accompanied with nearly 100% Faradic efficiency.

Prussian blue analogue-derived CoP nanocubes supported on MXene toward an efficient bifunctional electrode with enhanced overall water splitting

The exploration of bifunctional catalyst with economic, durable, and efficient performance plays a crucial role to boost both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in overall water splitting. Herein, we report a feasible strategy to design effective heterostructure between CoP and Ti3C2Tx MXene (denoted as CoP/Ti3C2Tx). This approach allows for the growth of CoP nanoparticles with uniform size of 5 nm on the Ti3C2Tx MXene, further enhancing the water electrolysis efficiency. The CoP/Ti3C2Tx bifunctional catalyst demonstrates an exceptional HER activity with a satisfactory overpotential of 103 mV at 10 mA cm-2, and also can drive 10 mA cm-2 for OER with the overpotential of 312 mV in 1.0 M KOH. Moreover, the CoP/Ti3C2Tx-based electrolyzer exhibits high electrochemical stability for 24 h with a low required voltage of 1.66 V at 10 mA cm-2. The density functional theory (DFT) calculations reveal that the introduction of Ti3C2Tx MXene significantly adjusts d-band center towards Fermi level and expand total density of states, resulting in great electrical conductivity, enhanced water adsorption, and activation. This study provides an available mode for effective design and construction of non-noble-metal-based dual-functional catalyst toward practical energy conversion.

Janus electronic state of supported iridium nanoclusters for sustainable alkaline water electrolysis

Metal-support electronic interactions play crucial roles in triggering the hydrogen spillover (HSo) to boost hydrogen evolution reaction (HER). It requires the supported metal of electron-rich state to facilitate the proton adsorption/spillover. However, this electron-rich metal state contradicts the traditional metal→support electron transfer protocol and is not compatible with the electron-donating oxygen evolution reaction (OER), especially in proton-poor alkaline conditions. Here we profile an Ir/NiPS3 support structure to study the Ir electronic states and performances in HSo/OER-integrated alkaline water electrolysis. The supported Ir is evidenced with Janus electron-rich and electron-poor states at the tip and interface regions to respectively facilitate the HSo and OER processes. Resultantly, the water electrolysis (WE) is efficiently implemented with 1.51 V at 10 mA cm-2 for 1000 h in 1 M KOH and 1.44 V in urea-KOH electrolyte. This research clarifies the Janus electronic state as fundamental in rationalizing efficient metal-support WE catalysts.

Metal Valence State Modulation Strategy to Design Core@shell Hollow Carbon Microspheres@MoSe2/MoOx Multicomponent Composites for Anti-Corrosion and Microwave Absorption

The exploitation of multicomponent composites (MCCs) has become the main pathway for obtaining advanced microwave absorption materials (MAMs). Herein, a metal valence state modulation strategy is proposed to tune the electromagnetic (EM) parameters and improve microwave absorption performances. Core@shell hollow carbon microspheres@MoSe2 and hollow carbon microspheres@MoSe2/MoOx MCCs with various mixed-valence states content are well-designed and produced by a simple hydrothermal reaction or/and heat treatment process. The results reveal that the thermal treatment of hollow carbon microspheres@MoSe2 in Ar and Ar/H2 leads to the in situ formation of MoOx and multivalence state, respectively, and the enhanced content of Mo4+ in the designed MCCs greatly boosts their impedance matching characteristics, polarization, and conduction loss capacities, which lead to their evidently improved EM wave absorption properties. Amongst, the as-prepared hollow carbon microspheres@MoSe2/MoOx MCCs achieve an effective absorption bandwidth of 5.80 GHz under a matching thickness of 1.97 mm and minimum reflection loss of -21.49 dB. Therefore, this work offers a simple and universal method to fabricate core@shell hollow carbon microspheres@MoSe2/MoOx MCCs, and a novel and feasible metal valence state modulation strategy is proposed to develop high-efficiency MAMs.

Tuning Electrons Migration of Dual S Defects Mediated MoS2-x/ZnIn2S4-x Toward Highly Efficient Photocatalytic Hydrogen Production

Photocatalytic hydrogen production is a prevalent method for hydrogen synthesis. However, high recombination rate of photogenerated carriers and high activation energy barrier of H remain persistent challenge. Here, the two-step hydrothermal method is utilized to prepare dual S-defect mediated catalyst molybdenum sulfide/zinc indium sulfide (MSv/ZISv), which has high hydrogen production rate of 8.83 mmol g-1h-1 under simulated sunlight. The achieved rate is 21.91 times higher than pure ZnIn2S4 substrate. Defects in ZIS within MSv/ZISv modify the primitive electronic structure by creating defect state that retaining good reducing power, leading to the rapid separation of electron-hole pairs and the generation of additional photogenerated carriers. The internal electric field further enhances the migration toward to cocatalyst. Simultaneously, the defects introduced on the MoS2 cause electron rearrangement, leading to electron clustering on both S vacancies and edge S. Thereby MSv/ZISv exhibits the lowest activation energy barrier and |ΔGH*|. This work explores the division of synergies between different types of S defects, providing new insights into the coupling of defect engineering.

Hydrogen Spillover Phenomenon at the Interface of Metal-Supported Electrocatalysts for Hydrogen Evolution

ConspectusHydrogen spillover, as a well-known phenomenon for thermal hydrogenation, generally involves the migration of active hydrogen on the surface of metal-supported catalysts. For thermocatalytic hydrogenation, hydrogen spillover generally takes place from metals with superiority for dissociating hydrogen molecules to supports with strong hydrogen adsorption under a H2 environment with high pressures. The former can bring high hydrogen chemical potential to largely reduce the kinetic barrier of the migration of active hydrogen species from metals to supports. At the same time, the latter can make H* migration thermodynamically spontaneous. For these reasons, hydrogen spillover is a common interfacial phenomenon occurring on metal-supported catalysts during thermocatalysis. Recently, this phenomenon has been observed for the exceptionally enhanced electrocatalytic performance for hydrogen evolution and other electrocatalytic organic synthesis. Different from hydrogen spillover for thermocatalysis under high H2 pressure, hydrogen spillover for electrocatalysis involves the migration of active hydrogen species (H*) from metals with strong hydrogen adsorption to supports with weak hydrogen adsorption, thereby suffering from a thermodynamically unfavorable process accompanied by a high kinetic barrier. Thus, the occurrence of hydrogen spillover at the electrocatalytic interface is not easy, and successful cases are rare. Understanding the underlying nature of hydrogen spillover at the electrocatalytic interface of metal-supported catalysts is critical to the rational design of advanced electrocatalysts.In this Account, we provide in-depth insights into recent advances in hydrogen spillover at the electrocatalytic interface for a significantly enhanced hydrogen evolution performance. Electron accumulation at the metal-support interface induces severe interfacial H* trapping and is recognized as the main factor in the failed hydrogen spillover. Given this, we developed two novel strategies to promote the occurrence of hydrogen spillover at the electrocatalytic interface. These strategies include (i) the introduction of ligand environments to enrich the local hydrogen coverage on metals and lower the barrier for interfacial hydrogen spillover and (ii) the minimization of work function difference between metals and supports (ΔΦ) to relieve electron accumulation and lower the kinetic barrier for hydrogen spillover. Also, we summarize the previously reported strategy of shortening the metal-support interface distance to lower the kinetic barrier for interfacial hydrogen spillover. Afterward, some criteria and methodologies are proposed to identify the hydrogen spillover phenomenon at the electrocatalytic interface. Finally, the remaining challenges and future perspectives are also discussed. Based on this Account, we aim to provide new insights into electrocatalysis, particularly the targeted control of hydrogen spillover at the electrocatalytic interface, and then to offer guidelines for the rational design of advanced electrocatalysts.

Heterometallic Electrocatalysts Derived from High-Nuclearity Metal Clusters for Efficient Overall Water Splitting

The development of cost-effective electrocatalysts with an optimal surface affinity for intermediates is essential for sustainable hydrogen fuel production, but this remains insufficient. Here we synthesize Ni2P/MoS2-CoMo2S4@C heterometallic electrocatalysts based on the high-nuclearity cluster {Co24(TC4A)6(MoO4)8Cl6}, in which Ni2P nanoparticles were anchored to the surface of the MoS2-CoMo2S4@C nanosheets via strong interfacial interactions. Theoretical calculations revealed that the introduction of Ni2P phases induces significant disturbances in the surface electronic configuration of Ni2P/MoS2-CoMo2S4@C, resulting in more relaxed d-d orbital electron transfers between the metal atoms. Moreover, continuous electron transport was established by the formation of multiple heterojunction interfaces. The optimized Ni2P/MoS2-CoMo2S4@C electrocatalyst exhibited ultralow overpotentials of 198 and 73 mV for oxygen and hydrogen evolution reactions, respectively, in alkaline media, at 10 mA cm-2. The alkali electrolyzer constructed using Ni2P/MoS2-CoMo2S4@C required a cell voltage of only 1.45 V (10 mA cm-2) to drive overall water splitting with excellent long-term stability.

Covalently Bonded Ni Sites in Black Phosphorene with Electron Redistribution for Efficient Metal-Lightweighted Water Electrolysis

The metal-lightweighted electrocatalysts for water splitting are highly desired for sustainable and economic hydrogen energy deployments, but challengeable. In this work, a low-content Ni-functionalized approach triggers the high capability of black phosphorene (BP) with hydrogen and oxygen evolution reaction (HER/OER) bifunctionality. Through a facile in situ electro-exfoliation route, the ionized Ni sites are covalently functionalized in BP nanosheets with electron redistribution and controllable metal contents. It is found that the as-fabricated Ni-BP electrocatalysts can drive the water splitting with much enhanced HER and OER activities. In 1.0 M KOH electrolyte, the optimized 1.5 wt% Ni-functionalized BP nanosheets have readily achieved low overpotentials of 136 mV for HER and 230 mV for OER at 10 mA cm-2. Moreover, the covalently bonding between Ni and P has also strengthened the catalytic stability of the Ni-functionalized BP electrocatalyst, stably delivering the overall water splitting for 50 h at 20 mA cm-2. Theoretical calculations have revealed that Ni-P covalent binding can regulate the electronic structure and optimize the reaction energy barrier to improve the catalytic activity effectively. This work confirms that Ni-functionalized BP is a suitable candidate for electrocatalytic overall water splitting, and provides effective strategies for constructing metal-lightweighted economic electrocatalysts.

Diluting the Resistance of Built-in Electric Fields in Oxygen Vacancy-enriched Ru/NiMoO4-x for Enhanced Hydrogen Spillover in Alkaline Seawater Splitting

Recently, hydrogen spillover based binary (HSBB) catalysts have received widespread attention due to the sufficiently utilized reaction sites. However, the specific regulation mechanism of spillover intensity is still unclear. Herein, we have fabricated oxygen vacancies enriched Ru/NiMoO4-x to investigate the internal relationship between electron supply and mechanism of hydrogen spillover enhancement. The DFT calculations cooperate with in situ Raman spectrum to uncover that the H* spillover from NiMoO4-x to Ru. Meanwhile, oxygen vacancies weakened the electron supply from Ru to NiMoO4-x , which contributes to dilute the resistance of built-in electric field (BEF) for hydrogen spillover. In addition, the higher ion concentration in electrolyte will promote the H* adsorption step obviously, which is demonstrated by in situ EIS tests. As a result, the Ru/NiMoO4-x exhibits a low overpotential of 206 mV at 3.0 A cm-2 , a small Tafel slope of 28.8 mV dec-1 , and an excellent durability of 550 h at the current density of 0.5 A cm-2 for HER in 1.0 M KOH seawater.

Facilitating Proton Coupled Electron Transfer Reaction through the Interfacial Micro Electric Field with Fe─N4 ─C in FeMOFs Glass

The proton-coupled electron transfer(PCET) reaction plays a crucial role in the chemical transformation process andhas become one of the most concerned elementary reactions. However, the complex kinetics of PCET reaction, which requires the simultaneous transfer of protons and electrons, leads to the dilemma that thermodynamics and kinetics cannot bebalanced and restricts its further development. In this, an interface micro-electric field (IMEF) basedon Fe─N4 in FeMOFs (Fe-Based Metal-Organic Frameworks) glass is designed tosynchronize proton/electron interface behavior for the first time to realizeefficient PCET reaction and optimize reaction thermodynamics and kinetics. The IMEF facilitates the separation of photogenerated electrons and holes, and accelerates Fe(III)/Fe(II) cycle. Driven by near-surface electric field force, the protons near surfacemigrate to Fe sites and participate in Fe(IV)═O formation and reaction, lowering the reaction energy barrier. Based on the interface regulation ofIMEF, a high-efficiency PCET reaction is realized, and kinetic reactionrate constant of photocatalytic oxidation of emerging contaminants is increasedby 3.7 times. This study highlights a strategy for IMEFs to modulate PEC Treactions for a wide range of potential applications, including environmental and ecological applications.

Modulation of Phase Transition in Cobalt Selenide with Simultaneous Construction of Heterojunctions for Highly-Efficient Oxygen Electrocatalysis in Zinc-Air Battery

Phase transformation of cobalt selenide (CoSe2 ) can effectively modulate its intrinsic electrocatalytic activity. However, enhancing electroconductivity and catalytic activity/stability of CoSe2 still remains challenging. Heterostructure engineering may be feasible to optimize interfacial properties to promote the kinetics of oxygen electrocatalysis on a CoSe2 -based catalyst. Herein, a heterostructure consisting of CoSe2 and cobalt nitride (CoN) embedded in a hollow carbon cage is designed via a simultaneous phase/interface engineering strategy. Notably, the phase transition of orthorhombic-CoSe2 to cubic-CoSe2 (c-CoSe2 ) accompanied by in situ CoN formation is realized to build the c-CoSe2 /CoN heterointerface, which exhibits excellent/highly stable activities for oxygen reduction/evolution reactions (ORR/OER). Notably, heterostructure can modulate the local coordination environment and increase Co-Se/N bond lengths. Theoretical calculations show that Co-site (c-CoSe2 ) with an electronic state near Fermi energy level is the main active site for ORR/OER.Energetical tailoring of the d-orbital electronic structure of the Co atom of c-CoSe2 in heterostructure by in situ CoN incorporation lowers thermodynamic barriers for ORR/OER. Attractively, a zinc-air battery with a c-CoSe2 -CoN cathode displays excellent cycling stability (250 h) and charge/discharge voltage loss (0.953/0.96 V). It highlights that heterointerface engineering provides an option for modulating the bifunctional activity of metal selenides with controlled phase transformation.

Heterostructure CoS2/MoS2 Nanosheets as a Dual-Active Electrocatalyst for the Oxygen Evolution Reaction

Cost-effective and earth-abundant oxygen evolution reaction (OER) electrocatalysts are an incredible research hotspot in numerous energy storage and conversion technology fields. Herein, CoS2/MoS2 nanosheets supported by carbon cloth as a dual-active CC@CoS2/MoS2 heterostructure electrocatalyst is prepared through a simple solvothermal method. The catalyst demonstrates admirable OER performance in 1 M KOH solution with a low overpotential of 243 mV at a current density of 10 mA cm-2 and a minor Tafel slope of 109 mV dec-1, displaying honorable stability after 1000 cyclic voltammetry (CV) cycles and long-term robustness over 60 h. Theoretical calculations further ascertain that the rate-determining step of the electrocatalytic course of the CC@CoS2/MoS2 heterostructure is the conversion *O + OH- → *OOH + e- with a lower energy barrier of 1.49 eV due to the heterojunction established by CoS2 and MoS2, which can promote the OER performance of electrocatalysts. The actual identification of the catalytic mechanism in the heterostructure is conducive to the improvement of electrocatalysis applications in the OER.

Porous Flower-Like Nanoarchitectures Derived from Nickel Phosphide Nanocrystals Anchored on Amorphous Vanadium Phosphate Nanosheet Nanohybrids for Superior Overall Water Splitting

Transition metal phosphides (TMPs) and phosphates (TM-Pis) nanostructures are promising functional materials for energy storage and conversion. Nonetheless, controllable synthesis of crystalline/amorphous heterogeneous TMPs/TM-Pis nanohybrids or related nanoarchitectures remains challenging, and their electrocatalytic applications toward overall water splitting (OWS) are not fully explored. Herein, the Ni2 P nanocrystals anchored on amorphous V-Pi nanosheet based porous flower-like nanohybrid architectures that are self-supported on carbon cloth (CC) substrate (Ni2 P/V-Pi/CC) are fabricated by conformal oxidation and phosphorization of pre-synthesized NiV-LDH/CC. Due to the unique microstructures and strong synergistic effects of crystalline Ni2 P and amorphous V-Pi components, the obtained Ni2 P/V-Pi/CC owns abundant active sites, suitable surface/interface electronic structure and optimized adsorption-desorption of reaction intermediates, resulting in outstanding electrocatalytic performances toward hydrogen and oxygen evolution reactions in alkaline media. Correspondingly, the assembled Ni2 P/V-Pi/CC||Ni2 P/V-Pi/CC electrolyzer only needs an ultralow cell voltage (1.44 V) to deliver 10 mA cm-2 water-splitting currents, exceeding its counterparts, recently reported bifunctional catalysts-based devices, and Pt/C/CC||IrO2 /CC pairs. Moreover, the Ni2 P/V-Pi/CC||Ni2 P/V-Pi/CC manifests remarkable stability. Also, such device shows a certain prospect for OWS in acidic media. This work may spur the development of TMPs/TMPis-based nanohybrid architectures by combining structure and phase engineering, and push their applications in OWS or other clean energy options.

Synergistic effect of interface and defect engineering of MoC/MoO2 nano dot encapsulated N-doped carbon nanoflowers for highly durable dye-sensitized solar cells

The design and fabrication of advanced counter electrodes (CEs) for dye-sensitized solar cells (DSSCs) are limited by the scarcity of active sites and poor durability. Herein, we report the controlled preparation of a heterostructured nanoreactor CE based on defect-rich N-doped carbon nanoflowers (NCF) encapsulating MoC/MoO2 nano dots (NDs) in a well-defined heterophase (MoC/MoO2-NCF). The MoC/MoO2 NDs were uniformly dispersed on the NCF, and the NCF limited the size of the MoC/MoO2 NDs and prevented their agglomeration, thus maximizing the electrochemically active surface area of MoC/MoO2. Moreover, the synergistic effect between the MoC/MoO2 interface and the N-defects is conducive to the full exposure of the active sites. Furthermore, theoretical calculations revealed that the MoC/MoO2 heterojunction played a unique role in modulating the electronic structure and regulating the adsorption energy of tri-iodide in the iodide reduction reaction. The MoC/MoO2-NCF CEs in DSSCs demonstrated a power conversion efficiency (PCE) of 9.92% and high durability, exceeding the PCE (8.36%) and durability of Pt CEs. Overall, this study offers insights into the controlled synthesis of high-performance Mo-based composite CE materials for DSSCs.

Substrate self-derived porous rod-like NiS/Ni9S8/NF heterostructures as efficient bifunctional electrocatalysts for overall water splitting

A self-derivation strategy using conductive substrates is used to prepare one-piece highly efficient bifunctional electrodes, where the chosen substrate acts as both an active catalyst precursor and a conductive carrier. Here, a bifunctional catalyst, porous NiS/Ni9S8/NF-2 nanorods, was synthesized by low-temperature vulcanization after an oxalic acid etching process. To reach a current density of 10 mA cm-2, NiS/Ni9S8/NF-2 requires only a tiny overpotential of 115 mV for the HER and 176 mV for the OER, and demonstrates sustained activity for 100 hours with almost any degradation. The substrate self-derived NiS/Ni9S8/NF-2 catalyst for overall water splitting requires only a small voltage of 1.52 V to deliver 10 mA cm-2 with excellent stability. Experimental results show that the heterostructured electrocatalysts impart good catalytic properties of NiS/Ni9S8/NF-2 by modulating the electronic structure and promoting the reconstruction process from sulfides to hydroxides. This work demonstrates the success of the substrate self-derivation strategy to achieve high catalytic activity and provide a new autogenous growth technique for electrode fabrication.

Internal Polarization Field Induced Hydroxyl Spillover Effect for Industrial Water Splitting Electrolyzers

The formation of multiple oxygen intermediates supporting efficient oxygen evolution reaction (OER) are affinitive with hydroxyl adsorption. However, ability of the catalyst to capture hydroxyl and maintain the continuous supply at active sits remains a tremendous challenge. Herein, an affordable Ni2P/FeP2 heterostructure is presented to form the internal polarization field (IPF), arising hydroxyl spillover (HOSo) during OER. Facilitated by IPF, the oriented HOSo from FeP2 to Ni2P can activate the Ni site with a new hydroxyl transmission channel and build the optimized reaction path of oxygen intermediates for lower adsorption energy, boosting the OER activity (242 mV vs. RHE at 100 mA cm-2) for least 100 h. More interestingly, for the anion exchange membrane water electrolyzer (AEMWE) with low concentration electrolyte, the advantage of HOSo effect is significantly amplified, delivering 1 A cm-2 at a low cell voltage of 1.88 V with excellent stability for over 50 h.

Atomic-level polarization in electric fields of defects for electrocatalysis

The thriving field of atomic defect engineering towards advanced electrocatalysis relies on the critical role of electric field polarization at the atomic scale. While this is proposed theoretically, the spatial configuration, orientation, and correlation with specific catalytic properties of materials are yet to be understood. Here, by targeting monolayer MoS2 rich in atomic defects, we pioneer the direct visualization of electric field polarization of such atomic defects by combining advanced electron microscopy with differential phase contrast technology. It is revealed that the asymmetric charge distribution caused by the polarization facilitates the adsorption of H*, which originally activates the atomic defect sites for catalytic hydrogen evolution reaction (HER). Then, it has been experimentally proven that atomic-level polarization in electric fields can enhance catalytic HER activity. This work bridges the long-existing gap between the atomic defects and advanced electrocatalysis by directly revealing the angstrom-scale electric field polarization and correlating it with the as-tuned catalytic properties of materials; the methodology proposed here could also inspire future studies focusing on catalytic mechanism understanding and structure-property-performance relationship.

CDs Regulated Sulfur-Based Flexible Electrode with Range pH Values for Efficient and Durable Hydrogen Evolution Reaction

How to mildly structure a high intrinsic activity and stable catalytic electrode to realize long-term catalytic water splitting to produce hydrogen at a wide range of pH values at industrial high current is a challenge. Herein, this work creatively proposes to prepare industrial-grade catalytic electrodes with high efficiency and stability at high current density through carbon quantum dots (CDs) modification nickel sulfide on hydrophilic flexible filter paper via one-step mild chemical plating (denoted as CDs-Ni3 S2 @HFP). The intrinsic activity and surface area, electron transfer ability, and corrosion resistance of Ni3 S2 material are increased due to the regulation, homogenous, and high concentration doping of CDs. The overpotential of the flexible catalytic electrode is only 30, 35, and 87 mV in 1 m KOH, simulated seawater (1 m KOH + 0.5 m NaCl), and neutral electrolyte (0.5 m PBS) at a current density of 10 mA cm-2 . More attractively, the CDs-Ni3 S2 @HFP electrode achieves over 500 h of efficient and stable catalysis at industrial high current density (500 mA cm-2 ). Due to the advantages of mild, universal, and large-area preparation of catalytic materials, this work provides technical support for flexible catalytic electrodes in efficient catalysis toward water splitting, energy storage, and device preparation.

Charge Self-Regulation of Metallic Heterostructure Ni2 P@Co9 S8 for Alkaline Water Electrolysis with Ultralow Overpotential at Large Current Density

Designing cost-effective alkaline water-splitting electrocatalysts is essential for large-scale hydrogen production. However, nonprecious catalysts face challenges in achieving high activity and durability at a large current density. An effective strategy for designing high-performance electrocatalysts is regulating the active electronic states near the Fermi-level, which can improve the intrinsic activity and increase the number of active sites. As a proof-of-concept, it proposes a one-step self-assembly approach to fabricate a novel metallic heterostructure based on nickel phosphide and cobalt sulfide (Ni2 P@Co9 S8 ) composite. The charge transfer between active Ni sites of Ni2 P and Co─Co bonds of Co9 S8 efficiently enhances the active electronic states of Ni sites, and consequently, Ni2 P@Co9 S8 exhibits remarkably low overpotentials of 188 and 253 mV to reach the current density of 100 mA cm-2 for the hydrogen evolution reaction and oxygen evolution reaction, respectively. This leads to the Ni2 P@Co9 S8 incorporated water electrolyzer possessing an ultralow cell voltage of 1.66 V@100 mA cm-2 with ≈100% retention over 100 h, surpassing the commercial Pt/C║RuO2 catalyst (1.9 V@100 mA cm-2 ). This work provides a promising methodology to boost the activity of overall water splitting with ultralow overpotentials at large current density by shedding light on the charge self-regulation of metallic heterostructure.

Solar-Driven Photothermal Catalytic Lignocellulosic Biomass-to-H2 Conversion

The conversion of lignocellulosic biomass to chemical fuel can achieve the sustainable use of lignocellulosic biomass, but it was limited by the lack of an effective conversion strategy. Here, we reported a unique approach of photothermal catalysis by using MoS2-reduced graphene oxide (MoS2/RGO) as the catalyst to convert lignocellulosic biomass into H2 fuel in alkaline solution. The RGO acting as a support for the growth of MoS2 results in the high exposed Mo edges, which act as efficient Lewis acidic sites for the oxygenolysis of lignocellulosic biomass dissolved in alkaline solution. The broad light absorption capacity and abundant Lewis acidic sites make MoS2/RGO to be efficient catalysts for photothermal catalytic H2 production from lignocellulosic biomass, and the H2 generation rate with respect to catalyst under 300 W Xe lamp irradiation in cellulose, rice straw, wheat straw, polar wood chip, bamboo, rice hull, and corncob aqueous solution achieve 223, 168, 230, 564, 390, 234, and 55 μmol·h-1·g-1, respectively. It is believed that this photothermal catalysis is a simple and "green" approach for the lignocellulosic biomass-to-H2 conversion, which would have great potential as a promising approach for solar energy-driven H2 production from lignocellulosic biomass.

Effect of in-plane Mott-Schottky on the hydroxyl deprotonation in MoS2@Co3S4/NC heterostructure for efficient overall water splitting

The development of clean energy sources such as hydrogen is indispensable for achieving the long-term goal of carbon neutrality by the mid-century. The utilization of renewable energy for power generation to electrolyze water for hydrogen production is one of the most desirable green hydrogen production methods. The cathode side of the decomposing water undergoes the oxygen precipitation reaction, and the oxygen precipitation mechanism can be divided into the adsorbed evolution mechanism (AEM) and lattice oxygen oxidation mechanism (LOM). Based on the adsorbed evolution mechanism (AEM), the deprotonation (DeP) process involving multiple electron transfers is central to determining the oxygen release. DeP is essentially a proton-transfer process that allows for the establishment of a bifunctional catalyst system with both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). Consequently, an all-transition-metal-based MoS2@Co3S4/NC heterostructure was designed and constructed in this study for the efficient total decomposition of water. The MoS2@Co3S4/NC catalyst achieved the HER and OER current densities of 10 mA cm-2 at the low overpotential (56 mV, 243 mV) and showed excellent long-term durability among all samples. The Mott-Schottky effect is considered the driving force for the HER and DeP in the OER. This study proposes a rational design for bifunctionalized non-precious metal electrolytic water catalysts using the Mott-Schottky effect as a criterion.

Unraveling and leveraging in situ surface amorphization for enhanced hydrogen evolution reaction in alkaline media

Surface amorphization provides electrocatalysts with more active sites and flexibility. However, there is still a lack of experimental observations and mechanistic explanations for the in situ amorphization process and its crucial role. Herein, we propose the concept that by in situ reconstructed amorphous surface, metal phosphorus trichalcogenides could intrinsically offer better catalytic performance for the alkaline hydrogen production. Trace Ru (0.81 wt.%) is doped into NiPS3 nanosheets for alkaline hydrogen production. Using in situ electrochemical transmission electron microscopy technique, we confirmed the amorphization process occurred on the edges of NiPS3 is critical for achieving superior activity. Comprehensive characterizations and theoretical calculations reveal Ru primarily stabilized at edges of NiPS3 through in situ formed amorphous layer containing bridging S22- species, which can effectively reduce the reaction energy barrier. This work emphasizes the critical role of in situ formed active layer and suggests its potential for optimizing catalytic activities of electrocatalysts.

Recent advances of H-intercalated Pd-based nanocatalysts for electrocatalytic reactions

The intercalation of H into Pd-based nanocatalysts plays a crucial role in optimizing the catalytic performance by tailoring the structural and electronic properties. We herein present a comprehensive review about the recent progress of interstitial hydrogen atom modified Pd-based nanocatalysts for various energy-related electrocatalytic reactions. Before systematically manifesting the great potential of Pd-based hydrides for electrocatalytic applications, we have briefly illustrated the synthesis strategies and corresponding mechanisms for the Pd-based hydrides. This is followed by a comprehensive discussion about the fundamentals and functions of H intercalation in tailoring their physicochemical and electrochemical properties. Subsequently, we focus on the widespread application of Pd-based hydrides for electrocatalytic reactions, with the emphasis on the role of H intercalation played in determining electrocatalytic performance. Finally, the future direction and perspectives regarding the development of more efficient Pd-based hydrides are also manifested.

Coupling MoS2 nanosheets with CeO2 for efficient electrocatalytic hydrogen evolution at large current densities

We developed an efficient MoS2 nanosheet electrode coupled with CeO2via a hydrothermal process to facilitate water adsorption and dissociation, which displayed good HER activity and stability at a large current density of 500 mA cm-2. In situ Raman spectroscopy confirmed the formation of hydroxide ions based on the strengthening of the Ce-O bond during the HER.

Synergistically Regulating the Electronic Structure of CoS by Cation and Anion Dual-Doping for Efficient Overall Water Splitting

Precisely regulating the electronic construction of the reactive center is an essential method to improve the electrocatalysis, but achieving efficient multifunctional characteristics remains a challenge. Herein, CoS sample dual-doped by Cu and F atoms, as bifunctional electrocatalyst, is designed and synthesized for water electrolysis. According to the experimental results, Cu atom doping can perform primary electronic adjustment and obtain bifunctional properties, and then the electronic structure is adjusted for the second time to achieve an optimal state by introducing F atom. Meanwhile, this dual-doping strategy will result in lattice distortion and expose more active sites. As expected, dual-doped Cu-F-CoS show the brilliant electrocatalytic activity, revealing ultralow overpotentials (59 mV for HER, 213 mV for OER) at 10 mA cm-2 in alkaline electrolyte. Besides, it also exhibits distinguished water electrolysis activity with cell voltage as low as 1.52 V at 10 mA cm-2 . Our work can provide an atomic-level perception for adjusting the electronic construction of reactive sites by means of dual-doping engineering and put forward a contributing path for the electrocatalysts with multifunctional designing.

Enlarging the Ni-O Bond Polarizability in a Phosphorene-Hosted Metal-Organic Framework for Boosted Water Oxidation Electrocatalysis

The emerging lattice-oxygen oxidation mechanism (LOM) presents attractive opportunities for breaking the scaling relationship to boost oxygen evolution reaction (OER) with the direct OLattice-*O interaction. However, currently the LOM-triggering rationales are still debated, and a streamlined physicochemical paradigm is extremely desirable for the design of LOM-defined OER catalysts. Herein, a Ni metal-organic framework/black phosphorene (NiMOF/BP) heterostructure is theoretically profiled and constructed as a catalytic platform for the LOM-derived OER studies. It is found that the p-type BP host can enlarge the Ni-O bond polarizability of NiMOF through the Ni-O bond stretching and Ni valence declining synergically. Such an enlarged bond polarizability will in principle alleviate the lattice oxygen confinement to benefit the LOM pathway and OER performance. As a result, the optimized NiMOF/BP catalyst exhibits promising OER performance with a low overpotential of 260 mV at 10 mA cm-2 and long-term stability in 1 M KOH electrolyte. Both experiment and calculation results suggest the activated LOM pathway with a more balanced step barrier in the NiMOF/BP OER catalyst. This research puts forward Ni-O bond polarizability as the criterion to design LOM-scaled electrocatalysts for water oxidation.

Ni/TiO2 heterostructures derived from phase separation for enhanced electrocatalysis of hydrogen evolution and biomass oxidative upgrading in anion exchange membrane electrolyzers

The construction of heterostructures is an effective strategy to enhance electrocatalysis for hydrogen evolution reactions (HERs) and biomass oxidative upgrading. In this work, a Ni/TiO2 heterostructure prepared by a phase-separation strategy was adopted as a bifunctional electrocatalyst for HERs and biomass oxidation in alkaline media. Due to the optimized hydrogen adsorption energetics as well as the interfacial water structure and hydrogen bond connectivity in the electrical double layer, Ni/TiO2 exhibited high activity for HERs with an overpotential of 28 mV at 10 mA cm-2 and good durability at 1000 mA cm-2 for over 100 h in an anion exchange membrane (AEM) electrolyzer. In addition, Ni/TiO2 showed high catalytic performance for the oxidation of biomass-based platform compound 5-hydroxymethylfurfural (HMF) to high-value added compound 2,5-furandicarboxylic acid (FDCA). Continuous production of FDCA with a yield >95% was achieved in the AEM electrolyzer for over 50 h. The superior HMF oxidation performance on the Ni/TiO2 heterostructure compared to Ni resulted from stronger HMF adsorption, lower Ni3+-O formation potential, longer Ni3+-O bond and smaller Ni crystal size.

Electronic Structure Engineering of Pt Species over Pt/WO3 toward Highly Efficient Electrocatalytic Hydrogen Evolution

Pt-based supported materials, a widely used electrocatalyst for hydrogen evolution reaction (HER), often experience unavoidable electron loss, resulting in a mismatching of electronic structure and HER behavior. Here, a Pt/WO3 catalyst consisting of Pt species strongly coupled with defective WO3 polycrystalline nanorods is rationally designed. The electronic structure engineering of Pt sites on WO3 can be systematically regulated, and so that the optimal electron-rich Pt sites on Pt/WO3 -600 present an excellent HER activity with only 8 mV overpotential at 10 mA cm-2 . Particularly, the mass activity reaches 7015 mA mg-1 at the overpotential of 50 mV, up to 26-fold higher than that of the commercial Pt/C. The combination of experimental and theoretical results demonstrates that the O vacancies of WO3 effectively mitigate the tendency of electron transfer from Pt sites to WO3 , so that the d-band center could reach an appropriate level relative to Fermi level, endowing it with a suitableΔ G H ∗ $\Delta {G_{{{\rm{H}}^ * }}}$ . This work identifies the influence of the electronic structure on catalytic activity.

D-π-A array structure of Bi4Ti3O12-triazine-aldehyde group benzene skeleton for enhanced photocatalytic uranium (VI) reduction

Photocatalytic reduction of U^VI to U^IV can help remove U from the environment and thus reduce the harmful impacts of radiation emitted by uranium isotopes. Herein, we first synthesized Bi₄Ti₃O₁₂ (B1) particles, then B1 was crosslinked with 6-chloro-1,3,5-triazine-diamine (DCT) to afford B2. Finally, B3 was formed using B2 and 4-formylbenzaldehyde (BA-CHO) to investigate the utility of the D-π-A array structure for photocatalytic U^VI removal from rare earth tailings wastewater. B1 lacked adsorption sites and displayed a wide band gap. The grafted triazine moiety in B2 introduced active sites and narrowed the band gap. Notably, B3, a Bi₄Ti₃O₁₂ (donor)-triazine unit (π-electron bridge)-aldehyde benzene (acceptor) molecule, effectively formed the D-π-A array structure, which formed multiple polarization fields and further narrowed the band gap. Therefore, U^VI was more likely to capture electrons at the adsorption site of B3 and be reduced to U^IV due to energy level matching effects. U^VI removal capacity of B3 under simulated sunlight was 684.9 mg g^-1, 2.5 times greater than B1 and 1.8 times greater than B2. B3 was still active after multiple reaction cycles, and U^VI removal from tailings wastewater reached 90.8%. Overall, B3 provides an alternative design scheme for enhancing photocatalytic performance.

Construction of an Advanced NiFe-LDH/MoS2-Ni3S2/NF Heterostructure Catalyst toward Efficient Electrocatalytic Overall Water Splitting

Developing high-efficiency, low-cost, and earth-abundant electrocatalysts toward the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER) is highly desirable for boosting the energy efficiency of water splitting. Herein, we adopted an interfacial engineering strategy to enhance the overall water splitting (OWS) activity via constructing a bifunctional OER/HER electrocatalyst combining MoS₂-Ni₃S₂ with NiFe layered double hydroxide (NiFe-LDH) on a nickel foam substrate. The NiFe-LDH/MoS₂-Ni₃S₂/NF electrocatalyst delivers superior OER/HER activity and stability, such as low overpotentials (220 and 79 mV for OER and HER at current densities of 50 and 10 mA cm^-2, respectively) and a low Tafel slope. This excellent electrocatalytic performance mainly benefits from the electronic structure modulation and synergistic effects between NiFe-LDH and MoS₂-Ni₃S₂, which provides a high electrochemical activity area, more active sites, and strong electron interaction. Furthermore, the assembly of NiFe-LDH/MoS₂-Ni₃S₂/NF into a two-electrode system only requires an ultra-low cell voltage of 1.50 V at a current density of 10 mA cm^-2 and exhibits outstanding stability with a decay of current density of only 2.11% @50 mA cm^-2 after 50 h, which is far superior to numerous other reported transition metal NiFe-LDH and MoS₂-Ni₃S₂-based as well as RuO₂||Pt-C electrocatalysts. This research highlights the rational design of heterostructures to efficiently advance electrocatalysis for water splitting applications.

Interfacial engineering of Co5.47N/Mo5N6 nanosheets with rich active sites synergistically accelerates water dissociation kinetics for Pt-like hydrogen evolution

The development of highly efficient hydrogen evolution electrocatalysts with platinum-like activity requires precise control of active sites through interface engineering strategies. In this study, a heterostructured Co_5.47N/Mo₅N₆ catalyst (CoMoN_x) on carbon cloth (CC) was synthesized using a combination of dip-etching and vapor nitridation methods. The rough nanosheet surface of the catalyst with uniformly distributed elements exposes a large active surface area and provides abundant interface sites that serve as additional active sites. The CoMoN_x was found to exhibit exceptional hydrogen evolution reaction (HER) activity with a low overpotential of 44 mV at 10 mA cm^-2 and exceptional stability of 100 h in 1.0 M KOH. The CoMoN_x^(-)||RuO₂⁽⁺⁾ system requires only 1.81 V cell voltage to reach a current density of 200 mA cm^-2, surpassing the majority of previously reported electrolyzers. Density functional theory (DFT) calculations reveal that the strong synergy between Co_5.47N and Mo₅N₆ at the interface can significantly reduce the water dissociation energy barrier, thereby improving the kinetics of hydrogen evolution. Furthermore, the rough nanosheet architecture of the CoMoN_x catalyst with abundant interstitial spaces and multi-channels enhances charge transport and reaction intermediate transportation, synergistically improving the performance of the HER for water splitting.

Construction of S-Scheme heterojunction Ni11(HPO3)8(OH)6/CdS photocatalysts with open framework surface for enhanced H2 evolution activity

The emerging S-scheme heterojunction shows a particular superiority in enhancing the efficiency of charge separation in photocatalyst. Herein, a Ni₁₁(HPO₃)₈(OH)₆/CdS heterojunctions (NiPO/CdS) are constructed for the first time by loading open framework structure NiPO on the surface of CdS nanoparticles (CdS NPs). The built-in electric field generated at the interface promotes the directional migration of photogenerated electrons from NiPO to CdS. This S-scheme pathway achieves a strong redox capacity and efficient carrier separation. More importantly, the unique triangular and hexagonal channels of NiPO facilitate the exposure of CdS active sites for proton adsorption, H₂ production and escape. The hydrogen evolution rate of NiPO/CdS is 39 mmol g^-1 h^-1 under visible light irradiation, which is 6.5 times higher than that of pure CdS. The NiPO/CdS heterojunction also exhibits remarkable long-term stability. This study provides a new strategy for the ingenious design of S-scheme photocatalysts with excellent photocatalytic performance.

Macroporous SnO2/MoS2 inverse opal hierarchitecture for highly efficient trace NO2 gas sensing

The innovation of NO₂ gas sensors is highly desirable in environmental monitoring and human safety. Herein, a macroporous SnO₂/MoS₂ inverse opal hierarchitecture has been constructed with substantial interface charge transfer, which realizes the efficient and stable detection of NO₂ with an enhanced response, fast kinetics, and high selectivity at low temperatures.

Intensifying Hydrogen Spillover for Boosting Electrocatalytic Hydrogen Evolution Reaction

Hydrogen spillover has attracted increasing interests in the field of electrocatalytic hydrogen evolution reaction (HER) in recent years because of their distinct reaction mechanism and beneficial terms for simultaneously weakening the strong hydrogen adsorption on metal and strengthening the weak hydrogen adsorption on support. By taking advantageous merits of efficient hydrogen transfer, hydrogen spillover-based binary catalysts have been widely investigated, which paves a new way for boosting the development of hydrogen production by water electrolysis. In this paper, we summarize the recent progress of this interesting field by focusing on the advanced strategies for intensifying the hydrogen spillover towards HER. In addition, the challenging issues and some perspective insights in the future development of hydrogen spillover-based electrocatalysts are also systematically discussed.

Urchin-Like Structured MoO2 /Mo3 P/Mo2 C Triple-Interface Heterojunction Encapsulated within Nitrogen-Doped Carbon for Enhanced Hydrogen Evolution Reaction

The development of highly efficient and cost-effective hydrogen evolution reaction (HER) catalysts is highly desirable to efficiently promote the HER process, especially under alkaline condition. Herein, a polyoxometalates-organic-complex-induced carbonization method is developed to construct MoO₂ /Mo₃ P/Mo₂ C triple-interface heterojunction encapsulated into nitrogen-doped carbon with urchin-like structure using ammonium phosphomolybdate and dopamine. Furthermore, the mass ratio of dopamine and ammonium phosphomolybdate is found critical for the successful formation of such triple-interface heterojunction. Theoretical calculation results demonstrate that such triple-interface heterojunctions possess thermodynamically favorable water dissociation Gibbs free energy (ΔG_H2O ) of -1.28 eV and hydrogen adsorption Gibbs free energy (ΔG_H* ) of -0.41 eV due to the synergistic effect of Mo₂ C and Mo₃ P as water dissociation site and H* adsorption/desorption sites during the HER process in comparison to the corresponding single components. Notably, the optimal heterostructures exhibit the highest HER activity with the low overpotential of 69 mV at the current density of 10 mA cm^-2 and a small Tafel slope of 60.4 mV dec^-1 as well as good long-term stability for 125 h. Such remarkable results have been theoretically and experimentally proven to be due to the synergistic effect between the unique heterostructures and the encapsulated nitrogen-doped carbon.

Ionic Liquid Meets MOF: A Facile Method to Optimize the Structure of CoSe2-NiSe2 Heterojunctions with N, P, and F Triple-Doped Carbon Using Ionic Liquid for Efficient Hydrogen Evolution and Flexible Supercapacitors

The rational design of catalysts' spatial structure is vitally important to boost catalytic performance by exposing the active sites and increasing specific surface area. Herein, the heteroatom doping and morphology of CoNi metal-organic frameworks(MOF) are modulated by controlling the volume of ionic liquid used in synthesis and generating CoSe₂ -NiSe₂ heterojunction structures wrapped by N, P, F tri-doped carbon(NPFC) after a selenisation process. Notably, the unique cubic porous structure of CoSe₂ -NiSe₂ /NPFC results in a specific surface five times that of the sheet-like hollow structure produced without ionic liquid. Moreover, the charge redistribution during heterojunction formation is verified in detail using synchrotron radiation. Density functional theory calculations reveal that the formation of heterojunctions and doping of heteroatoms successfully lower the ΔG_H* and ΔG_OH* values. Consequently, CoSe₂ -NiSe₂ /NPFC exhibits excellent activity for HER in both acidic and alkaline solutions. Meanwhile, CoSe₂ -NiSe₂ /NPFC as a cathode material exhibits excellent performance in a flexible solid-state supercapacitor, with a superior energy density of 55.7 Wh kg^-1 at an extremely high-power density of 15.9 kW kg^-1 . This material design provides new ideas for not only using ionic liquids to modulate the morphology of MOFs but also deriving heterojunctions and heteroatom-doped carbon from MOFs.

Ir Nanoparticles Anchored on Metal-Organic Frameworks for Efficient Overall Water Splitting under pH-Universal Conditions

The construction of high-activity and low-cost electrocatalysts is critical for efficient hydrogen production by water electrolysis. Herein, we developed an advanced electrocatalyst by anchoring well-dispersed Ir nanoparticles on nickel metal-organic framework (MOF) Ni-NDC (NDC: 2,6-naphthalenedicarboxylic) nanosheets. Benefiting from the strong synergy between Ir and MOF through interfacial Ni-O-Ir bonds, the synthesized Ir@Ni-NDC showed exceptional electrocatalytic performance for hydrogen evolution reaction (HER), oxygen evolution reaction (OER) and overall water splitting in a wide pH range, superior to commercial benchmarks and most reported electrocatalysts. Theoretical calculations revealed that the charge redistribution of Ni-O-Ir bridge induced the optimization of H₂ O, OH* and H* adsorption, thus leading to the accelerated electrochemical kinetics for HER and OER. This work provides a new clue to exploit bifunctional electrocatalysts for pH-universal overall water splitting.

Amorphous Mo-doped NiS0.5 Se0.5 Nanosheets@Crystalline NiS0.5 Se0.5 Nanorods for High Current-density Electrocatalytic Water Splitting in Neutral Media

It is vitally important to develop highly active, robust and low-cost transition metal-based electrocatalysts for overall water splitting in neutral solution especially at large current density. In this work, amorphous Mo-doped NiS_0.5 Se_0.5 nanosheets@crystalline NiS_0.5 Se_0.5 nanorods (Am-Mo-NiS_0.5 Se_0.5 ) was synthesized using a facil one-step strategy. In phosphate buffer saline solution, the Am-Mo-NiS_0.5 Se_0.5 shows tiny overpotentials of 48 and 209 mV for hydrogen evolution reaction (HER), 238 and 514 mV for oxygen evolution reaction (OER) at 10 and 1000 mA cm^-2 , respectively. Moreover, Am-Mo-NiS_0.5 Se_0.5 delivers excellent stability for at least 300 h without obvious degradation. Theoretical calculations revealed that the Ni sites in the defect-rich amorphous structure of Am-Mo-NiS_0.5 Se_0.5 owns higher electron state density and strengthened the binding energy of H₂ O, which will optimize H adsorption/desorption energy barriers and reduce the adsorption energy of OER determining step.

Gel Electrolytes for Electrochemical Actuators and Sensors Applications

Advanced functional materials, especially gel electrolytes, play a very important role in the preparation of electrochemical actuators and sensors, and have received extensive attention. In this review, a general classification of gel electrolytes is firstly introduced according to the type of medium. Then, the research progress of gel electrolytes with different types used to fabricate electrochemical actuators is summarized. Next, the current research progress of gel electrolytes used in different types of electrochemical sensors, including strain sensors, stress sensors, and gas sensors is introduced. Finally, the future challenges and development prospects of electrochemical actuators and sensors based on gel electrolytes are discussed. The huge application prospects of gel electrolyte are worthy of further focusing by researchers, which will have an indispensable impact on human life and development.

Novel Complex Titanium NASICON-Type Phosphates as Acidic Catalysts for Ethanol Dehydration

The conversion of ethanol towards ethylene and diethyl ether in the presence of catalysts requires special consideration from the perspective of green chemistry. Ethanol dehydration was studied on a complex titanium phosphate MAlTiP (M0.5(1+x)AlxTi2-x(PO4)3 with M = Ni, Mn (x = 0; 0.2)) catalysts, alongside a NASICON-type structure synthesized by the sol–gel method. The initial catalysts were characterized by N2 gas sorption, SEM, XRD and spectroscopic methods (Raman and DRIFT of adsorbed CO and C6H6). The results revealed that all catalysts exhibited high activity and selectivity at 300–420 °C. The conversion of ethanol increases with the reaction temperature, reaching 67–80% at 420 °C. The MnAlTiP exhibited the highest ethylene selectivity among other catalysts, with 87% at 420 °C. The aluminum modification improved the acid properties of the catalysts, due to the appearance of Lewis acid sites (LAS) and the strength moderate Brønsted acid sites (BAS). It was shown that the activity of complex phosphates in ethanol dehydration increases with the strength of the Brønsted acid sites (BAS).

Two-Dimensional Iron Phosphorus Trisulfide as a High-Capacity Cathode for Lithium Primary Battery

Metal phosphorus trichalcogenide (MPX₃) materials have aroused substantial curiosity in the evolution of electrochemical storage devices due to their environment-friendliness and advantageous X-P synergic effects. The interesting intercalation properties generated due to the presence of wide van der Waals gaps along with high theoretical specific capacity pose MPX₃ as a potential host electrode in lithium batteries. Herein, we synthesized two-dimensional iron thio-phosphate (FePS₃) nanoflakes via a salt-template synthesis method, using low-temperature time synthesis conditions in single step. The electrochemical application of FePS₃ has been explored through the construction of a high-capacity lithium primary battery (LPB) coin cell with FePS₃ nanoflakes as the cathode. The galvanostatic discharge studies on the assembled LPB exhibit a high specific capacity of ~1791 mAh g^-1 and high energy density of ~2500 Wh Kg^-1 along with a power density of ~5226 W Kg^-1, some of the highest reported values, indicating FePS₃'s potential in low-cost primary batteries. A mechanistic insight into the observed three-staged discharge mechanism of the FePS₃-based primary cell resulting in the high capacity is provided, and the findings are supported via post-mortem analyses at the electrode scale, using both electrochemical- as well as photoelectron spectroscopy-based studies.

Novel Bifunctional Nitrogen Doped MoS2/COF-C4N Vertical Heterostructures for Electrocatalytic HER and OER

Highly active and earth-abundant catalysts for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) play vital roles in developing efficient water splitting to produce hydrogen fuels. Here, we reported an effective strategy to fabricate a completely new nitrogen-doped MoS2/COF-C4N vertical heterojunction (N-MoS2/COF-C4N) as precious-metal-free bifunctional electrocatalysts for both HER and OER. Compared with MoS2 and COF-C4N, the obtained vertical N-MoS2/COF-C4N catalyst showed enhanced HER with a low overpotential of 106 mV at 10 mA cm−2, which is six times lower than MoS2. The superior acidic HER activity, molecular mechanism, and charge transfer characteristic of this vertical N-MoS2/COF-C4N were investigated experimentally and theoretically in detail. Its basic OER activity is almost equal to that of COF-C4N with an overpotential of 349 mV at 10 mA cm−2, which showed that the in-situ growing method maintains the exposure of the C active sites to the greatest extent. The preparation and investigation for vertical N-MoS2/COF-C4N provide ideas and a research basis for us to further explore promising overall water-splitting electrocatalysts.

Low-dimensional transition metal sulfide-based electrocatalysts for water electrolysis: overview and perspectives

Hydrogen prepared by electrocatalytic decomposition of water ("green hydrogen") has the advantages of high energy density and being clean and pollution-free, which is an important energy carrier to face the problems of the energy crisis and environmental pollution. However, the most used commercial electrocatalysts are based on expensive and scarce precious metals and their alloy materials, which seriously restricts the large-scale industrial application of hydrogen energy. The development of efficient non-precious metal electrocatalysts is the key to achieving the sustainable development of the hydrogen energy industry. Transition metal sulfides (TMS) have become popular non-precious metal electrocatalysts with great application potential due to their large specific surface area, unique electronic structure, and rich regulatory strategies. To further improve their catalytic activities for practical application, many methods have been tried in recent years, including control of morphology and crystal plane, metal/nonmetal doping, vacancy engineering, building of self-supporting electrocatalysts, interface engineering, etc. In this review, we introduce firstly the common types of TMS and their preparation. Additionally, we summarize the recent developments of the many different strategies mentioned above for efficient water electrolysis applications. Furthermore, the rationales behind their enhanced electrochemical performances are discussed. Lastly, the challenges and future perspectives are briefly discussed for TMS-based water dissociation catalysts.

Chemical Transformation Induced Core-Shell Ni2P@Fe2P Heterostructures toward Efficient Electrocatalytic Oxygen Evolution

The oxygen evolution reaction (OER) is a crucial reaction in water splitting, metal-air batteries, and other electrochemical conversion technologies. Rationally designed catalysts with rich active sites and high intrinsic activity have been considered as a hopeful strategy to address the sluggish kinetics for OER. However, constructing such active sites in non-noble catalysts still faces grand challenges. To this end, we fabricate a Ni₂P@Fe₂P core-shell structure with outperforming performance toward OER via chemical transformation of rationally designed Ni-MOF hybrid nanosheets. Specifically, the Ni-MOF nanosheets and their supported Fe-based nanomaterials were in situ transformed into porous Ni₂P@Fe₂P core-shell nanosheets composed of Ni₂P and Fe₂P nanodomains in homogenous dispersion via a phosphorization process. When employed as the OER electrocatalyst, the Ni₂P@Fe₂P core-shell nanosheets exhibits excellent OER performance, with a low overpotential of 238/247 mV to drive 50/100 mA cm^-2, a small Tafel slope of 32.91 mV dec^-1, as well as outstanding durability, which could be mainly ascribed to the strong electronic interaction between Ni₂P and Fe₂P nanodomains stabilizing more Ni and Fe atoms with higher valence. These high-valence metal sites promote the generation of high-active Ni/FeOOH to enhance OER activity.