Black Phosphorous Mediates Surface Charge Redistribution of CoSe2 for Electrochemical H2 O2 Production in Acidic Electrolytes

Simultaneously Producing H2 and H2O2 by Photocatalytic Water Splitting: Recent Progress and Future

The solar-driven overall water splitting (2H2O→2H2 + O2) is considered as one of the most promising strategies for reducing carbon emissions and meeting energy demands. However, due to the sluggish performance and high H2 cost, there is still a big gap for the current photocatalytic systems to meet the requirements for practical sustainable H2 production. Economic feasibility can be attained through simultaneously generating products of greater value than O2, such as hydrogen peroxide (H2O2, 2H2O→H2 + H2O2). Compared with overall water splitting, this approach is more kinetically feasible and generates more high-value products of H2 and H2O2. In several years, there has been an increasing surge in exploring the possibility and substantial progress has been achieved. In this review, a concise overview of the importance and underlying principles of PIWS is first provided. Next, the reported typical photocatalysts for PIWS are discussed, including commonly used semiconductors and cocatalysts, essential design features of these photocatalysts, and connections between their structures and activities, as well as the selected approaches for enhancing their stability. Then, the techniques used to quantify H2O2 and the operando characterization techniques that can be employed to gain a thorough understanding of the reaction mechanisms are summarized. Finally, the current existing challenges and the direction needing improvement are presented. This review aims to provide a thorough summary of the most recent research developments in PIWS and sets the stage for future advancements and discoveries in this emerging area.

Selective and durable H2O2 electrosynthesis catalyst in acid by selenization induced straining and phasing

Developing efficient electrocatalysts for acidic electrosynthesis of hydrogen peroxide (H2O2) holds considerable significance, while the selectivity and stability of most materials are compromised under acidic conditions. Herein, we demonstrate that constructing amorphous platinum-selenium (Pt-Se) shells on crystalline Pt cores can manipulate the oxygen reduction reaction (ORR) pathway to efficiently catalyze the electrosynthesis of H2O2 in acids. The Se2‒Pt nanoparticles, with optimized shell thickness, exhibit over 95% selectivity for H2O2 production, while suppressing its decomposition. In flow cell reactor, Se2‒Pt nanoparticles maintain current density of 250 mA cm-2 for 400 h, yielding a H2O2 concentration of 113.2 g L-1 with productivity of 4160.3 mmol gcat-1 h-1 for effective organic dye degradation. The constructed amorphous Pt-Se shell leads to desirable O2 adsorption mode for increased selectivity and induces strain for optimized OOH* binding, accelerating the reaction kinetics. This selenization approach is generalizable to other noble metals for tuning 2e‒ ORR pathway.

Synergistic Active Heterostructure Design for Enhanced Two Electron Oxygen Reduction via Chemical and Electrochemical Reconstruction of Heterosulfides

Transition metal sulfides, particularly heterostructures, represent a promising class of electrocatalysts for two electron oxygen reduction (2e- ORR), however, understanding the dynamic structural evolution of these catalysts during alkaline ORR remains relatively unexplored. Herein, NiS2/In2.77S4 heterostructure was synthesized as a precatalyst and through a series of comprehensive ex situ and in situ characterizations, including X-ray absorption spectroscopy, Raman spectroscopy, transient photo-induced voltage measurements, electron energy loss spectroscopy, and spherical aberration-corrected electron microscopy, it was revealed that nickel/indium (oxy)hydroxides (NiOOH/In(OH)3) could be evolved from the initial NiS2/In2.77S4 via both electrochemical and chemical-driven methods. The electrochemical-driven phase featured abundant bridging oxygen-deficient [NiO6]-[InO6] units at the interfaces of NiOOH/In(OH)3, facilitating a synergistic effect between active Ni and In sites, thus enabling an enhanced alkaline 2e- ORR capability than that of chemical-driven process. Remarkably, electrochemically induced NiOOH/In(OH)3 exhibited exceptional performance, achieving H2O2 selectivity of >90 % across the wide potential window (up to 0.4 V) with a peak selectivity of >99 %. Notably, within the three-electrode flow cell, a current density of 200 mA cm-2 was sustained over 20 h, together with an impressive Faradaic efficiency of ~90 % during the whole cycle process.

Rationally Designed Mo/Ru-Based Multi-Site Heterogeneous Electrocatalyst for Accelerated Alkaline Hydrogen Evolution Reaction

The rational design of multi-site electrocatalysts with three different functions for facile H2O dissociation, H-H coupling, and rapid H2 release is desirable but difficult to achieve. This strategy can accelerate the sluggish kinetics of the hydrogen evolution reaction (HER) under alkaline conditions. To resolve this issue, a Mo/Ru-based catalyst with three different active sites (Ru/Mo2C/MoO2) is rationally designed and its performance in alkaline HER is evaluated. The experimental results and density functional theory calculations revealed that, at the heterogeneous Mo2C/MoO2 interface, the higher valence state of Mo (MoO2) and the lower valence state of Mo (Mo2C) exhibited strong OH- and H-binding energies, respectively, which accelerated H2O dissociation. Moreover, the interfacial Ru possessed an appropriate hydrogen binding energy for H-H coupling and subsequent H2 evolution. Thus, this catalyst significantly accelerated the Volmer step and the Tafel step and, consequently, HER kinetics. This catalyst also demonstrated low overpotentials of 19 and 160 mV at current densities of 10 and 1000 mA cm-2, respectively, in alkaline media and long-term stability superior to that of most state-of-the-art alkaline HER electrocatalysts. This work provides a rational design principle for advanced multi-site catalytic systems, which can realize multi-electron electrocatalytic reactions.

Progress of Metal Chalcogenides as Catalysts for Efficient Electrosynthesis of Hydrogen Peroxide

Hydrogen peroxide (H2O2) is a high-demand chemical, valued as a powerful and eco-friendly oxidant for various industrial applications. The traditional industrial method for producing H2O2, known as the anthraquinone process, is both costly and environmentally problematic. Electrochemical synthesis, which produces H2O2 using electricity, offers a sustainable alternative, particularly suited for small-scale, continuous on-site H2O2 generation due to the portability of electrocatalytic devices. For efficient H2O2 electrosynthesis, electrocatalysts must exhibit high selectivity, activity, and stability for the two-electron pathway-oxygen reduction reaction (2e- ORR). Transition-metal chalcogenide (TMC)-based materials have emerged as promising candidates for effective 2e- ORR due to their high activity in acidic environments and the abundance of their constituent elements. This review examines the potential of TMC-based catalysts in H2O2 electrosynthesis, categorizing them into noble-metal and non-noble-metal chalcogenides. It underscores the importance of achieving high selectivity, activity, and stability in 2e- ORR. By reviewing recent advancements and identifying key challenges, this review provides valuable insights into the development of TMC-based electrocatalysts for sustainable H2O2 production.

Oxygen Functional Groups Regulate Cobalt-Porphyrin Molecular Electrocatalyst for Acidic H2O2 Electrosynthesis at Industrial-Level Current

Electrosynthesis of hydrogen peroxide (H2O2) based on proton exchange membrane (PEM) reactor represents a promising approach to industrial-level H2O2 production, while it is hampered by the lack of high-efficiency electrocatalysts in acidic medium. Herein, we present a strategy for the specific oxygen functional group (OFG) regulation to promote the H2O2 selectivity up to 92 % in acid on cobalt-porphyrin molecular assembled with reduced graphene oxide. In situ X-ray adsorption spectroscopy, in situ Raman spectroscopy and Kelvin probe force microscopy combined with theoretical calculation unravel that different OFGs exert distinctive regulation effects on the electronic structure of Co center through either remote (carboxyl and epoxy) or vicinal (hydroxyl) interaction manners, thus leading to the opposite influences on the promotion in 2e- ORR selectivity. As a consequence, the PEM electrolyzer integrated with the optimized catalyst can continuously and stably produce the high-concentration of ca. 7 wt % pure H2O2 aqueous solution at 400 mA cm-2 over 200 h with a cell voltage as low as ca. 2.1 V, suggesting the application potential in industrial-scale H2O2 electrosynthesis.

Selective oxygen reduction reaction: mechanism understanding, catalyst design and practical application

The oxygen reduction reaction (ORR) is a key component for many clean energy technologies and other industrial processes. However, the low selectivity and the sluggish reaction kinetics of ORR catalysts have hampered the energy conversion efficiency and real application of these new technologies mentioned before. Recently, tremendous efforts have been made in mechanism understanding, electrocatalyst development and system design. Here, a comprehensive and critical review is provided to present the recent advances in the field of the electrocatalytic ORR. The two-electron and four-electron transfer catalytic mechanisms and key evaluation parameters of the ORR are discussed first. Then, the up-to-date synthetic strategies and in situ characterization techniques for ORR electrocatalysts are systematically summarized. Lastly, a brief overview of various renewable energy conversion devices and systems involving the ORR, including fuel cells, metal-air batteries, production of hydrogen peroxide and other chemical synthesis processes, along with some challenges and opportunities, is presented.

Coupling Ni Single Atomic Sites with Metallic Aggregates at Adjacent Geometry on Carbon Support for Efficient Hydrogen Peroxide Electrosynthesis

Single atomic catalysts have shown great potential in efficiently electro-converting O2 to H2O2 with high selectivity. However, the impact of coordination environment and introduction of extra metallic aggregates on catalytic performance still remains unclear. Herein, first a series of carbon-based catalysts with embedded coupling Ni single atomic sites and corresponding metallic nanoparticles at adjacent geometry is synthesized. Careful performance evaluation reveals NiSA/NiNP-NSCNT catalyst with precisely controlled active centers of synergetic adjacent Ni-N4S single sites and crystalline Ni nanoparticles exhibits a high H2O2 selectivity over 92.7% within a wide potential range (maximum selectivity can reach 98.4%). Theoretical studies uncover that spatially coupling single atomic NiN4S sites with metallic Ni aggregates in close proximity can optimize the adsorption behavior of key intermediates *OOH to achieve a nearly ideal binding strength, which thus affording a kinetically favorable pathway for H2O2 production. This strategy of manipulating the interaction between single atoms and metallic aggregates offers a promising direction to design new high-performance catalysts for practical H2O2 electrosynthesis.

Stable Pentagonal Layered Palladium Diselenide Enables Rapid Electrosynthesis of Hydrogen Peroxide

Electrosynthesis of hydrogen peroxide (H2O2) via the two-electron oxygen reduction reaction (2e- ORR) is promising for various practical applications, such as wastewater treatment. However, few electrocatalysts are active and selective for 2e- ORR yet are also resistant to catalyst leaching under realistic operating conditions. Here, a joint experimental and computational study reveals active and stable 2e- ORR catalysis in neutral media over layered PdSe2 with a unique pentagonal puckered ring structure type. Computations predict active and selective 2e- ORR on the basal plane and edge of PdSe2, but with distinct kinetic behaviors. Electrochemical measurements of hydrothermally synthesized PdSe2 nanoplates show a higher 2e- ORR activity than other Pd-Se compounds (Pd4Se and Pd17Se15). PdSe2 on a gas diffusion electrode can rapidly accumulate H2O2 in buffered neutral solution under a high current density. The electrochemical stability of PdSe2 is further confirmed by long device operational stability, elemental analysis of the catalyst and electrolyte, and synchrotron X-ray absorption spectroscopy. This work establishes a new efficient and stable 2e- ORR catalyst at practical current densities and opens catalyst designs utilizing the unique layered pentagonal structure motif.

Understanding Advanced Transition Metal-Based Two Electron Oxygen Reduction Electrocatalysts from the Perspective of Phase Engineering

Non-noble transition metal (TM)-based compounds have recently become a focal point of extensive research interest as electrocatalysts for the two electron oxygen reduction (2e- ORR) process. To efficiently drive this reaction, these TM-based electrocatalysts must bear unique physiochemical properties, which are strongly dependent on their phase structures. Consequently, adopting engineering strategies toward the phase structure has emerged as a cutting-edge scientific pursuit, crucial for achieving high activity, selectivity, and stability in the electrocatalytic process. This comprehensive review addresses the intricate field of phase engineering applied to non-noble TM-based compounds for 2e- ORR. First, the connotation of phase engineering and fundamental concepts related to oxygen reduction kinetics and thermodynamics are succinctly elucidated. Subsequently, the focus shifts to a detailed discussion of various phase engineering approaches, including elemental doping, defect creation, heterostructure construction, coordination tuning, crystalline design, and polymorphic transformation to boost or revive the 2e- ORR performance (selectivity, activity, and stability) of TM-based catalysts, accompanied by an insightful exploration of the phase-performance correlation. Finally, the review proposes fresh perspectives on the current challenges and opportunities in this burgeoning field, together with several critical research directions for the future development of non-noble TM-based electrocatalysts.

BiVO4-Based Heterojunction Photocathode for High-Performance Photoelectrochemical Hydrogen Peroxide Production

Photoelectrochemical (PEC) cells provide a promising solution for the synthesis of hydrogen peroxide (H2O2). Herein, an integrated photocathode of p-type BiVO4 (p-BVO) array with tetragonal zircon structure coupled with different metal oxide (MOx, M = Sn, Ti, Ni, and Zn) heterostructure and NiNC cocatalyst (p-BVO/MOx/NiNC) was synthesized for the PEC oxygen reduction reaction (ORR) in production of H2O2. The p-BVO/SnO2/NiNC array achieves the production rate 65.46 μmol L-1 h-1 of H2O2 with a Faraday efficiency (FE) of 76.12%. Combined with the H2O2 generation of water oxidation from the n-type Mo-doped BiVO4 (n-Mo:BVO) photoanode, the unbiased photoelectrochemical cell composed of a p-BVO/SnO2/NiNC photocathode and n-Mo:BVO photoanode achieves a total FE of 97.67% for H2O2 generation. The large area BiVO4-based tandem cell of 3 × 3 cm2 can reach a total H2O2 production yield of 338.84 μmol L-1. This work paves the way for the rational design and fabrication of artificial photosynthetic cells for the production of liquid solar fuel.

Recent Progress of Transition Metal Selenides for Electrochemical Oxygen Reduction to Hydrogen Peroxide: From Catalyst Design to Electrolyzers Application

Hydrogen peroxide (H2O2) is a highly value-added and environmental-friendly chemical with various applications. The production of H2O2 by electrocatalytic 2e- oxygen reduction reaction (ORR) has emerged as a promising alternative to the energy-intensive anthraquinone process. High selectivity Catalysts combining with superior activity are critical for the efficient electrosynthesis of H2O2. Earth-abundant transition metal selenides (TMSs) being discovered as a classic of stable, low-cost, highly active and selective catalysts for electrochemical 2e- ORR. These features come from the relatively large atomic radius of selenium element, the metal-like properties and the abundant reserves. Moreover, compared with the advanced noble metal or single-atom catalysts, the kinetic current density of TMSs for H2O2 generation is higher in acidic solution, which enable them to become suitable catalyst candidates. Herein, the recent progress of TMSs for ORR to H2O2 is systematically reviewed. The effects of TMSs electrocatalysts on the activity, selectivity and stability of ORR to H2O2 are summarized. It is intended to provide an insight from catalyst design and corresponding reaction mechanisms to the device setup, and to discuss the relationship between structure and activity.

Ni clusters immobilized on oxygen-rich siloxene nanosheets for efficient electrocatalytic oxygen reduction toward H2O2 synthesis

Hydrogen peroxide (H2O2) electrosynthesis via the two-electron oxygen reduction reaction (2e- ORR) represents a green alternative to the energy-intensive anthraquinone process. However, the practical application of this method is limited by the lack of cost-effective and high-performance electrocatalysts. Reported here is a hybrid catalyst composed of nickel (Ni) clusters immobilized onto the surface of two-dimensional siloxene nanosheets (Ni/siloxene), which exhibits excellent efficiency and selectivity in electrocatalytic oxygen reduction to H2O2 in an alkaline medium, demonstrating a standard 2e- pathway with >95% H2O2 selectivity across a wide potential range. Experimental results disclose that the high performance of Ni/siloxene can be traced to a synergy of the Ni clusters and the oxygen-rich surface of siloxene. Density functional theory (DFT) calculations further reveal a weakened interaction between Ni/siloxene and *OOH and the consequently reduced energy barrier for the *OOH protonation toward H2O2 desorption, thus leading to a high 2e- ORR reactivity and selectivity. This work provides a valuable and practical guidance for designing high-performance 2e- ORR electrocatalysts based on the rational engineering of the metal-support interaction.

Enhanced molecular oxygen activation via K/O interfacial modification for boosted electrocatalytic degradation over a broad pH range

Molecular oxygen activation plays an important role in the electrocatalytic degradation of recalcitrant pollutants. And the key lies in the tailoring of electronic structures over catalysts. Herein, carbon nitride with K/O interfacial modification (KOCN) was designed and fabricated for efficient molecular oxygen activation. Theoretical screening results revealed the possible substitution of peripheral N atoms by O atoms and the location of K atoms in the six-fold cavities of g-C3N4 framework. Spectroscopic and experimental results reveal that the existence of K/O promotes charge redistribution over as-prepared catalysts, leading to optimized electronic structures. Therefore, optimized oxygen adsorption was realized over 8 % KOCN, which was further converted into superoxide and singlet oxygen effectively. The rate constant of 8 % KOCN (1.8 × 10-2 min-1) reached 2.2 folds of pristine g-C3N4 (8.1 × 10-3 min-1) counterpart during tetracycline degradation. Moreover, the high electron mobility and excellent structural stability endow the catalyst with remarkable catalytic performance in a broad pH range of 3-11.

A Multifunctional Hydrogel for Simultaneous Visible H2 O2 Monitoring And Accelerating Diabetic Wound Healing

Diabetic wound is one of the chronic wounds that is difficult to heal, and effective treatment of it still confronts a great challenge. Monitoring the variation of diabetic wound microenvironment (such as hydrogen peroxide (H2 O2 )) can understand the wound state and guide the wound management. Herein, a multifunctional hydrogel with the abilities of monitoring the H2 O2 concentration, alleviating oxidative stress and promoting wound healing is developed, which is prepared by encapsulating manganese-containing bioactive glass (MnBG) and CePO4 :Tb in biocompatible gelatin methacryloyl (GelMA) hydrogel (CPT-MnBG-Gel). On the one hand, the H2 O2 -dependent fluorescence quenching effect of the CePO4 :Tb contributes to visible monitoring of the H2 O2 concentration of wounds via smartphone imaging, and the CPT-MnBG-Gel hydrogel can effectively monitor the H2 O2 level of 10.35-200 µmol L-1 . On the other hand, MnBG can alleviate oxidative stress and promote the proliferation, migration and differentiation of fibroblasts and endothelial cells in vitro owing to the bioactive Mn and Si ions, and in vivo evaluation also demonstrates that the CPT-MnBG-Gel hydrogels can effectively accelerate wound healing. Hence, such multifunctional hydrogel is promising for diabetic wound management and accelerating wound healing.

Pauling-Type Adsorption of O2 Induced by Heteroatom Doped ZnIn2 S4 for Boosted Solar-Driven H2 O2 Production

Breaking the trade-off between activity and selectivity has perennially been a formidable endeavor in the field of hydrogen peroxide (H2 O2 ) photosynthesis, especially the side-on configuration of oxygen (O2 ) on the catalyst surface will cause the cleavage of O-O bonds, which drastically hinders the H2 O2 production performance. Herein, we present an atomically heteroatom P doped ZnIn2 S4 catalyst with tunable oxygen adsorption configuration to accelerate the ORR kinetics essential for solar-driven H2 O2 production. Indeed, the spectroscopy characterizations (such as EXAFS and in situ FTIR) and DFT calculations reveal that heteroatom P doped ZnIn2 S4 at substitutional and interstitial sites, which not only optimizes the coordination environment of Zn active sites, but also facilitates electron transfer to the Zn sites and improves charge density, avoiding the breakage of O-O bonds and reducing the energy barriers to H2 O2 production. As a result, the oxygen adsorption configuration is regulated from side-on (Yeager-type) to end-on (Pauling-type), resulting in the accelerated ORR kinetics from 874.94 to 2107.66 μmol g-1  h-1 . This finding offers a new avenue toward strategic tailoring oxygen adsorption configuration by the rational design of doped photocatalyst.

Advances on Axial Coordination Design of Single-Atom Catalysts for Energy Electrocatalysis: A Review

Single-atom catalysts (SACs) have garnered increasingly growing attention in renewable energy scenarios, especially in electrocatalysis due to their unique high efficiency of atom utilization and flexible electronic structure adjustability. The intensive efforts towards the rational design and synthesis of SACs with versatile local configurations have significantly accelerated the development of efficient and sustainable electrocatalysts for a wide range of electrochemical applications. As an emergent coordination avenue, intentionally breaking the planar symmetry of SACs by adding ligands in the axial direction of metal single atoms offers a novel approach for the tuning of both geometric and electronic structures, thereby enhancing electrocatalytic performance at active sites. In this review, we briefly outline the burgeoning research topic of axially coordinated SACs and provide a comprehensive summary of the recent advances in their synthetic strategies and electrocatalytic applications. Besides, the challenges and outlooks in this research field have also been emphasized. The present review provides an in-depth and comprehensive understanding of the axial coordination design of SACs, which could bring new perspectives and solutions for fine regulation of the electronic structures of SACs catering to high-performing energy electrocatalysis.

CoIn dual-atom catalyst for hydrogen peroxide production via oxygen reduction reaction in acid

The two-electron oxygen reduction reaction in acid is highly attractive to produce H2O2, a commodity chemical vital in various industry and household scenarios, which is still hindered by the sluggish reaction kinetics. Herein, both density function theory calculation and in-situ characterization demonstrate that in dual-atom CoIn catalyst, O-affinitive In atom triggers the favorable and stable adsorption of hydroxyl, which effectively optimizes the adsorption of OOH on neighboring Co. As a result, the oxygen reduction on Co atoms shifts to two-electron pathway for efficient H2O2 production in acid. The H2O2 partial current density reaches 1.92 mA cm-2 at 0.65 V in the rotating ring-disk electrode test, while the H2O2 production rate is as high as 9.68 mol g-1 h-1 in the three-phase flow cell. Additionally, the CoIn-N-C presents excellent stability during the long-term operation, verifying the practicability of the CoIn-N-C catalyst. This work provides inspiring insights into the rational design of active catalysts for H2O2 production and other catalytic systems.

Optimizing the Pd Sites in Pure Metallic Aerogels for Efficient Electrocatalytic H2 O2 Production

Decentralized electrochemical production of hydrogen peroxide (H₂ O₂ ) is an attractive alternative to the industrial anthraquinone process, the application of which is hindered by the lack of high-performance electrocatalysts in acidic media. Herein, a novel catalyst design strategy is reported to optimize the Pd sites in pure metallic aerogels by tuning their geometric environments and electronic structures. By increasing the Hg content in the Pd-Hg aerogels, the PdPd coordination is gradually diminished, resulting in isolated, single-atom-like Pd motifs in the Pd₂ Hg₅ aerogel. Further heterometal doping leads to a series of M-Pd₂ Hg₅ aerogels with an unalterable geometric environment, allowing for sole investigation of the electronic effects. Combining theoretical and experimental analyses, a volcano relationship is obtained for the M-Pd₂ Hg₅ aerogels, demonstrating an effective tunability of the electronic structure of the Pd active sites. The optimized Au-Pd₂ Hg₅ aerogel exhibits an outstanding H₂ O₂ selectivity of 92.8% as well as transferred electron numbers of ≈2.1 in the potential range of 0.0-0.4 V_RHE . This work opens a door for designing metallic aerogel electrocatalysts for H₂ O₂ production and highlights the importance of electronic effects in tuning electrocatalytic performances.

Low-Coordinated Pd Site within Amorphous Palladium Selenide for Active, Selective, and Stable H2 O2 Electrosynthesis

The development of high-performance catalysts with high activity, selectivity, and stability are essential for the practical applications of H₂ O₂ electrosynthesis technology, but it is still formidably challenging. It is reported that the low-coordinated structure of Pd sites in amorphous PdSe₂ nanoparticles (a-PdSe₂ NPs) can significantly boost the electrocatalytic synthesis of H₂ O₂ . Detailed investigations and theoretical calculations reveal that the disordered arrangement of Pd atoms in a-PdSe₂ NPs can promote the activity, while the Pd sites with low-coordinated environment can optimize the adsorption toward oxygenated intermediate and suppress the cleavage of O-O bond, leading to a significant enhancement in both the H₂ O₂ selectivity and productivity. Impressively, a-PdSe₂ NPs/C exhibits high H₂ O₂ selectivity over 90% in different pH electrolytes. H₂ O₂ productivities with ≈3245.7, 1725.5, and 2242.1 mmol g_Pd ^-1  h^-1 in 0.1 m KOH, 0.1 m HClO₄ , and 0.1 m Na₂ SO₄ can be achieved, respectively, in an H-cell electrolyzer, being a pH-universal catalyst for H₂ O₂ electrochemical synthesis. Furthermore, the produced H₂ O₂ can reach 1081.8 ppm in a three-phase flow cell reactor after 2 h enrichment in 0.1 m Na₂ SO₄ , showing the great potential of a-PdSe₂ NPs/C for practical H₂ O₂ electrosynthesis.