Interface Engineering Toward Expedited Li2 S Deposition in Lithium-Sulfur Batteries: A Critical Review

rGO@TiO2-x Schottky heterojunction for enhanced bidirectional catalysis in polysulfide conversion

The shuttling and sluggish conversion kinetics of lithium polysulfides (LiPSs) lead to poor cycling performance and low energy efficiency in lithium-sulfur batteries (LSBs). In this work, a hierarchically structured nanocomposite, synthesized through a surfactant-directed hydrothermal growth following dopamine-protected pyrolysis, serves as a bidirectional catalyst for LSBs. This nanocomposite comprises N-doped reduced graphene oxide (rGO) nanosheets anchored with uniformly distributed TiO2-x nanoparticles via interfacial N-Ti and C-Ti bonding, resulting in the formation of abundant 2D/0D Schottky heterojunctions (rGO/TiO2-x). Density functional theory (DFT) calculations and in situ Raman characterizations demonstrate that rGO/TiO2-x effectively inhibits the shuttling of LiPSs with enhanced redox kinetics, achieving high utilization of the sulfur cathode and improving the overall reversibility. A high areal capacity is attained at a high sulfur loading and a low electrolyte/sulfur ratio. The initial specific capacity reaches 1010 mA h g-1 at a current density of 0.2C (1C = 1675 mA g-1), and a retention of 86.4 % is attained over 100 cycles. A light-emitting diode (LED) screen using two LSBs with rGO/TiO2-x demonstrates their high potential for practical applications.

Advances in Functional Organosulfur-Based Mediators for Regulating Performance of Lithium Metal Batteries

Rechargeable lithium metal batteries (LMBs) are promising next-generation energy storage systems due to their high theoretical energy density. However, their practical applications are hindered by lithium dendrite growth and various intricate issues associated with the cathodes. These challenges can be mitigated by using organosulfur-based mediators (OSMs), which offer the advantages of abundance, tailorable structures, and unique functional adaptability. These features enable the rational design of targeted functionalities, enhance the interfacial stability of the lithium anode and cathode, and accelerate the redox kinetics of electrodes via alternative reaction pathways, thereby effectively improving the performance of LMBs. Unlike the extensively explored field of organosulfur cathode materials, OSMs have garnered little attention. This review systematically summarizes recent advancements in OSMs for various LMB systems, including lithium-sulfur, lithium-selenium, lithium-oxygen, lithium-intercalation cathode batteries, and other LMB systems. It briefly elucidates the operating principles of these LMB systems, the regulatory mechanisms of the corresponding OSMs, and the fundamentals of OSMs activity. Ultimately, strategic optimizations are proposed for designing novel OSMs, advanced mechanism investigation, expanded applications, and the development of safe battery systems, thereby providing directions to narrow the gap between rational modulation of organosulfur compounds and their practical implementation in batteries.

Flash Joule Heating: A Promising Method for Preparing Heterostructure Catalysts to Inhibit Polysulfide Shuttling in Li-S Batteries

The "shuttle effect" issue severely hinders the practical application of lithium-sulfur (Li-S) batteries, which is primarily caused by the significant accumulation of lithium polysulfides in the electrolyte. Designing effective catalysts is highly desired for enhancing polysulfide conversion to address the above issue. Here, the one-step flash-Joule-heating route is employed to synthesize a W-W2C heterostructure on the graphene substrate (W-W2C/G) as a catalytic interlayer for this purpose. Theoretical calculations reveal that the work function difference between W (5.08 eV) and W2C (6.31 eV) induces an internal electric field at the heterostructure interface, accelerating the movement of electrons and ions, thus promoting the sulfur reduction reaction (SRR) process. The high catalytic activity is also confirmed by the reduced activation energy and suppressed polysulfide shuttling by in situ Raman analyses. With the W-W2C/G interlayer, the Li-S batteries exhibit an outstanding rate performance (665 mAh g-1 at 5.0 C) and cycle steadily with a low decay rate of 0.06% over 1000 cycles at a high rate of 3.0 C. Moreover, a high areal capacity of 10.9 mAh cm-2 (1381.4 mAh g-1) is obtained with a high area sulfur loading of 7.9 mg cm-2 but a low electrolyte/sulfur ratio of 9.0 µL mg-1.

Multifunctional TiN-MXene-Co@CNTs Networks as Sulfur/Lithium Host for High-Areal-Capacity Lithium-Sulfur Batteries

The inevitable shuttling and slow redox kinetics of lithium polysulfides (LiPSs) as well as the uncontrolled growth of Li dendrites have strongly limited the practical applications of lithium-sulfur batteries (LSBs). To address these issues, we have innovatively constructed the carbon nanotubes (CNTs) encapsulated Co nanoparticles in situ grown on TiN-MXene nanosheets, denoted as TiN-MXene-Co@CNTs, which could serve simultaneously as both sulfur/Li host to kill "three birds with one stone" to (1) efficiently capture soluble LiPSs and expedite their redox conversion, (2) accelerate nucleation/decomposition of solid Li2S, and (3) induce homogeneous Li deposition. Benefiting from the synergistic effects, the TiN-MXene-Co@CNTs/S cathode with a sulfur loading of 2.5 mg cm-2 could show a high reversible specific capacity of 1129.1 mAh g-1 after 100 cycles at 0.1 C, and ultralong cycle life over 1000 cycles at 1.0 C. More importantly, it even achieves a high areal capacity of 6.3 mAh cm-2 after 50 cycles under a sulfur loading as high as 8.9 mg cm-2 and a low E/S ratio of 5.0 μL mg-1. Besides, TiN-MXene-Co@CNTs as Li host could deliver a stable Li plating/striping behavior over 1000 h.

Promoting Polysulfide Redox Reactions through Electronic Spin Manipulation

Catalytic additives able to accelerate the lithium-sulfur redox reaction are a key component of sulfur cathodes in lithium-sulfur batteries (LSBs). Their design focuses on optimizing the charge distribution within the energy spectra, which involves refinement of the distribution and occupancy of the electronic density of states. Herein, beyond charge distribution, we explore the role of the electronic spin configuration on the polysulfide adsorption properties and catalytic activity of the additive. We showcase the importance of this electronic parameter by generating spin polarization through a defect engineering approach based on the introduction of Co vacancies on the surface of CoSe nanosheets. We show vacancies change the electron spin state distribution, increasing the number of unpaired electrons with aligned spins. This local electronic rearrangement enhances the polysulfide adsorption, reducing the activation energy of the Li-S redox reactions. As a result, more uniform nucleation and growth of Li2S and an accelerated liquid-solid conversion in LSB cathodes are obtained. These translate into LSB cathodes exhibiting capacities up to 1089 mA h g-1 at 1 C with 0.017% average capacity loss after 1500 cycles, and up to 5.2 mA h cm-2, with 0.16% decay per cycle after 200 cycles in high sulfur loading cells.

Efficient Host Materials for Lithium-Sulfur Batteries: Ultrafine CoP Nanoparticles in Black Phosphorus-Carbon Composite

The pursuit of efficient host materials to address the sluggish redox kinetics of sulfur species has been a longstanding challenge in advancing the practical application of lithium-sulfur batteries. In this study, amorphous carbon layer loaded with ultrafine CoP nanoparticles prepared by a one-step in situ carbonization/phosphating method to enhance the inhibition of 2D black phosphorus (BP) on LiPSs shuttle. The carbon coating layer facilitates accelerated electron/ion transport, enabling the active involvement of BP in the conversion of soluble lithium polysulfides (LiPSs). Concurrently, the ultra-fine CoP nanoparticles enhance the chemical anchoring ability and introduce additional catalytic sites. As a result, S@BP@C-CoP electrodes demonstrate exemplary cycling stability (with a minimal capacity decay of 0.054 % over 500 cycles at 1 C) and superior rate performance (607.1 mAh g-1 at 5 C). Moreover, at a sulfur loading of 5.5 mg cm-2, the electrode maintains an impressive reversible areal capacity of 5.45 mAh cm-2 after 50 cycles at 0.1 C. This research establishes a promising approach, leveraging black phosphorus-based materials, for developing high-efficiency Li-S batteries.

Nitrogen-Doped CoP with optimized d-Band center as bidirectional electrocatalyst for high areal capacity of Li-S battery

Lithium polysulfide (LiPSs) shuttle effect and difficulties with Li2S oxidation are hinder the marketization of lithium-sulfur batteries. We suggest using a bidirectional catalyst in the sulfur host to solve these problems. We produced a nitrogen-doped cobalt phosphide (N-CoP@NC) as a sulfur carrier in this work. The introduction of nitrogen into cobalt phosphide enhances the electron transmission speed and forms shorter Co-N bonds. As a result, new defect energy levels are introduced, leading to an increase in the charge number of Co central atoms, which abate the Li-S and SS bonds in Li2S and Li2S4, thereby promoting the oxidation of Li2S during charging, as well as the alteration process of LiPSs during charge and discharge. Additionally, the crystal flaws that result in increased Co-S bond formation help to boost polysulfides' adsorption ability. The Li-S batteries shows outstanding cyclability when paired with this electrocatalyst, demonstrating a minimal capacity degradation rate of only 0.07 % per cycle over 500 cycles at a rate of 0.5C. As a result, incorporating anion doping in the host emerges as a promising method for crafting materials tailored for Li-S batteries.

Modulation of Potential-Limiting Steps in Lithium-Sulfur Batteries by Catalyst Synergy

Electrocatalysis is considered to be an effective method to solve the sluggish kinetics of lithium-sulfur batteries. However, a single catalyst cannot simultaneously catalyze multi-step sulfur reductions. And once the catalyst surface is covered by the initially deposited solid products, the subsequent catalytic activity will significantly deteriorate. Here, microporous ZIF-67 and its derivative nano-metallic Co0 are used as dual-catalyst aiming to address these drawbacks. The dual catalytic center effectively cooperates the adsorption and electron transfer for multi-steps of sulfur reductions, transforming the potential-limited step (Li2S4→Li2S2/Li2S) into a thermodynamic spontaneous reaction. ZIF-67 first adsorbs soluble Li2S4 to form a coordination structure of ZIF-Li2S4. Then nano-metallic Co0 attracts uncoordinated S atoms in ZIF-Li2S4 and facilitates the breaking of S-S bonds to form transient reductive ZIF-Li2S2 and Co-S2 via. spontaneous electron transfer. These intermediates facilitate continuous conversion to Li2S with reduced formation energy, which is beneficial to the regeneration of the catalyst. As a result, the cathode with ZIF@CNTs/Co@CNFs synergetic catalyst achieves initial areal capacity of 4.7 mAh cm-2 and maintains 3.5 mAh cm-2 at low electrolyte/sulfur ratio (E/S) of 5 µL mg-1. This study provides valuable guidance for improving the electrochemical performance of lithium-sulfur batteries through catalyst synergistic strategies for multi-step reactions.

Molecular Intercalation Enables Phase Transition of MoSe2 for Durable Na-Ion Storage

1T-MoSe2 is recognized as a promising anode material for sodium-ion batteries, thanks to its excellent electrical conductivity and large interlayer distance. However, its inherent thermodynamic instability often presents unparalleled challenges in phase control and stabilization. Here, a molecular intercalation strategy is developed to synthesize thermally stable 1T-rich MoSe2, covalently bonded to an intercalated carbon layer (1TR/2H-MoSe2@C). Density functional theory calculations uncover that the introduced ethylene glycol molecules not only serve as electron donors, inducing a reorganization of Mo 4d orbitals, but also as sacrificial guest materials that generate a conductive carbon layer. Furthermore, the C─Se/C─O─Mo bonds encourage strong interfacial electronic coupling, and the carbon layer prevents the restacking of MoSe2, regulating the maximum 1T phase to an impressive 80.3%. Consequently, the 1TR/2H-MoSe2@C exhibits an extraordinary rate capacity of 326 mAh g-1 at 5 A g-1 and maintains a long-term cycle stability up to 1500 cycles, with a capacity of 365 mAh g-1 at 2 A g-1. Additionally, the full cell delivers an appealing energy output of 194 Wh kg-1 at 208 W kg-1, with a capacity retention of 87.3% over 200 cycles. These findings contribute valuable insights toward the development of innovative transition metal dichalcogenides for next-generation energy storage technologies.

Conformal 3D Li/Li13Sn5 Scaffolds Anodes for High-Areal Energy Density Flexible Lithium Metal Batteries

Achieving a high depth of discharge (DOD) in lithium metal anodes (LMAs) is crucial for developing high areal energy density batteries suitable for wearable electronics. Yet, the persistent growth of dendrites compromises battery performance, and the significant lithium consumption during pre-lithiation obstructs their broad application. Herein, A flexible 3D Li13Sn5 scaffold is designed by allowing molten lithium to infiltrate carbon cloth adorned with SnO2 nanocrystals. This design markedly curbs the troublesome dendrite growth, thanks to the uniform electric field distribution and swift Li+ diffusion dynamics. Additionally, with a minimal SnO2 nanocrystals loading (2 wt.%), only 0.6 wt.% of lithium is consumed during pre-lithiation. Insights from in situ optical microscope observations and COMSOL simulations reveal that lithium remains securely anchored within the scaffold, a result of the rapid mass/charge transfer and uniform electric field distribution. Consequently, this electrode achieves a remarkable DOD of 87.1% at 10 mA cm-2 for 40 mAh cm-2. Notably, when coupled with a polysulfide cathode, the constructed flexible Li/Li13Sn5@CC||Li2S6/SnO2@CC pouch cell delivers a high-areal capacity of 5.04 mAh cm-2 and an impressive areal-energy density of 10.6 mWh cm-2. The findings pave the way toward the development of high-performance LMAs, ideal for long-lasting wearable electronics.

Bottom-Up Magnesium Deposition Induced by Paper-Based Triple-Gradient Scaffolds toward Flexible Magnesium Metal Batteries

The development of advanced magnesium metal batteries (MMBs) has been hindered by longstanding challenges, such as the inability to induce uniform magnesium (Mg) nucleation and the inefficient utilization of Mg foil. This study introduces a novel solution in the form of a flexible, lightweight, paper-based scaffold that incorporates gradient conductivity, magnesiophilicity, and pore size. This design is achieved through an industrially adaptable papermaking process in which the ratio of carboxylated multi-walled carbon nanotubes to softwood cellulose fibers is meticulously adjusted. The triple-gradient structure of the scaffold enables the regulation of Mg ion flux, promoting bottom-up Mg deposition. Owing to its high flexibility, low thickness, and reduced density, the scaffold has potential applications in flexible and wearable electronics. Accordingly, the triple-gradient electrodes exhibit stable operation for over 1200 h at 3 mA cm-2 /3 mAh cm-2 in symmetrical cells, markedly outperforming the non-gradient and metallic Mg alternatives. Notably, this study marks the first successful fabrication of a flexible MMB pouch full cell, achieving an impressive volumetric energy density of 244 Wh L-1 . The simplicity and scalability of the triple-gradient design, which uses readily available materials through an industrially compatible papermaking process, open new doors for the production of flexible, high-energy-density metal batteries.

RuOx Quantum Dots Loaded on Graphdiyne for High-Performance Lithium-Sulfur Batteries

Here, a strategy to strengthen d-p orbital hybridization by fabricating π backbonding in the catalyst for efficient lithium polysulfides (LiPSs) conversion is reported. A special interface structure of RuOx quantum dots (QDs) anchored on graphdiyne (GDY) nanoboxes (RuOx QDs/GDY) is prepared to enable strong Ru-to-alkyne π backdonation, which effectively regulates the d-electron structures of Ru centers to promote the d-p orbital hybridization between the catalyst and LiPSs and significantly boosts the catalytic performance of RuOx QDs/GDY. The strong affinity with Li ions and fast Li-ion diffusion of RuOx QDs/GDY also enable ultrastable Li metal anodes. Thus, S@RuOx QDs/GDY cathodes exhibit excellent cycling performance under harsh conditions, and Li@RuOx QDs/GDY anodes show an ultralong cycling life over 8800 h without Li dendrite growth. Lithium-sulfur (Li-S) full cells with S@RuOx QDs/GDY cathodes and Li@RuOx QDs/GDY anodes can deliver an impressive areal capacity of 17.8 mA h cm-2 and good cycling stability under the practical conditions of low negative-to-positive electrode capacity (N/P) ratio (N/P = 1.4), lean electrolyte (E/S = 3 µL mg-1 ), and high S mass loading (15.4 mg cm-2 ).

High-Areal Capacity, High-Rate Lithium Metal Anodes Enabled by Nitrogen-Doped Graphene Mesh

Hosts hold great prospects for addressing the dendrite growth and volume expansion of the Li metal anode, but Li dendrites are still observable under the conditions of high deposition capacity and/or high current density. Herein, a nitrogen-doped graphene mesh (NGM) is developed, which possesses a conductive and lithiophilic scaffold for efficient Li deposition. The abundant nanopores in NGM can not only provide sufficient room for Li deposition, but also speed up Li ion transport to achieve a high-rate capability. Moreover, the evenly distributed N dopants on the NGM can guide the uniform nucleation of Li so that to inhibit dendrite growth. As a result, the composite NGM@Li anode shows satisfactory electrochemical performances for Li-S batteries, including a high capacity of 600 mAh g-1 after 300 cycles at 1 C and a rate capacity of 438 mAh g-1 at 3 C. This work provides a new avenue for the fabrication of graphene-based hosts with large areal capacity and high-rate capability for Li metal batteries.

Accelerating Sulfur Redox Kinetics by Electronic Modulation and Drifting Effects of Pre-Lithiation Electrocatalysts

Efficient catalyst design is crucial for addressing the sluggish multi-step sulfur redox reaction (SRR) in lithium-sulfur batteries (LiSBs), which are among the promising candidates for the next-generation high-energy-density storage systems. However, the limited understanding of the underlying catalytic kinetic mechanisms and the lack of precise control over catalyst structures pose challenges in designing highly efficient catalysts, which hinder the LiSBs' practical application. Here, drawing inspiration from the theoretical calculations, the concept of precisely controlled pre-lithiation SRR electrocatalysts is proposed. The dual roles of channel and surface lithium in pre-lithiated 1T'-MoS2 are revealed, referred to as the "electronic modulation effect" and "drifting effect", respectively, both of which contribute to accelerating the SRR kinetics. As a result, the thus-designed 1T'-Lix MoS2 /CS cathode obtained by epitaxial growth of pre-lithiated 1T'-MoS2 on cubic Co9 S8 exhibits impressive performance with a high initial specific capacity of 1049.8 mAh g-1 , excellent rate-capability, and remarkable long-term cycling stability with a decay rate of only 0.019% per cycle over 1000 cycles at 3 C. This work highlights the importance of precise control in pre-lithiation parameters and the synergistic effects of channel and surface lithium, providing new valuable insights into the design and optimization of SRR electrocatalysts for high-performance LiSBs.

Stabilizing Lithium-Metal Host Anodes by Covalently Binding MgF2 Nanodots to Honeycomb Carbon Nanofibers

Constructing lithiophilic carbon hosts has been regarded as an effective strategy for inhibiting Li dendrite formation and mitigating the volume expansion of Li metal anodes. However, the limitation of lithiophilic carbon hosts by conventional surface decoration methods over long-term cycling hinders their practical application. In this work, a robust host composed of ultrafine MgF2 nanodots covalently bonded to honeycomb carbon nanofibers (MgF2/HCNFs) is created through an in situ solid-state reaction. The composite exhibits ultralight weight, excellent lithiophilicity, and structural stability, contributing to a significantly enhanced energy efficiency and lifespan of the battery. Specifically, the strong covalent bond not only prevents MgF2 nanodots from migrating and aggregating but also enhances the binding energy between Mg and Li during the molten Li infusion process. This allows for the effective and stable regulation of repeated Li plating/stripping. As a result, the MgF2/HCNF-Li electrode delivers a high Coulombic efficiency of 97% after 200 cycles, cycling stably for more than 2000 h. Furthermore, the full cells with a LiFePO4 cathode achieve a capacity retention of 85% after 500 cycles at 0.5C. This work provides a strategy to guide dendrite-free Li deposition patterns toward the development of high-performance Li metal batteries.

Engineering Strategies for Suppressing the Shuttle Effect in Lithium-Sulfur Batteries

Lithium-sulfur (Li-S) batteries are supposed to be one of the most potential next-generation batteries owing to their high theoretical capacity and low cost. Nevertheless, the shuttle effect of firm multi-step two-electron reaction between sulfur and lithium in liquid electrolyte makes the capacity much smaller than the theoretical value. Many methods were proposed for inhibiting the shuttle effect of polysulfide, improving corresponding redox kinetics and enhancing the integral performance of Li-S batteries. Here, we will comprehensively and systematically summarize the strategies for inhibiting the shuttle effect from all components of Li-S batteries. First, the electrochemical principles/mechanism and origin of the shuttle effect are described in detail. Moreover, the efficient strategies, including boosting the sulfur conversion rate of sulfur, confining sulfur or lithium polysulfides (LPS) within cathode host, confining LPS in the shield layer, and preventing LPS from contacting the anode, will be discussed to suppress the shuttle effect. Then, recent advances in inhibition of shuttle effect in cathode, electrolyte, separator, and anode with the aforementioned strategies have been summarized to direct the further design of efficient materials for Li-S batteries. Finally, we present prospects for inhibition of the LPS shuttle and potential development directions in Li-S batteries.

Li+ mobility powered by a crystal compound for fast Li-S chemistry

Placing blocking layers between electrodes has shown paramount prospects in suppressing the shuttle effect of Li-S batteries, but the associated ionic transport would be a concurrent obstacle. Herein, we present a Li-based crystal composited with carbon (LiPN2@C) by a one-step annealing of Li+ absorbed melamine polyphosphate, which simultaneously achieves alleviated polysulfide-shuttling and facilitated Li+ transport. As a homologous crystal, LiPN2 with abundant lithiophilic sites makes Li+ transport more efficient and sustainable. With a LiPN2@C-modified separator, the Li2S cathode exhibits a much-lower activation potential of 2.4 V and a high-rate capacity of 519 mA h g-1 at 2C. Impressively, the battery delivers a capacity of 726 mA h g-1 at 0.5C with a low decay rate of 0.25% per cycle during 100 continuous cycles.

Local Built-In Field at the Sub-nanometric Heterointerface Mediates Cascade Electrochemical Conversion of Lithium-sulfur Batteries

Heterogeneous catalytic mediators have been proposed to play a vital role in enhancing the multiorder reaction and nucleation kinetics in multielectron sulfur electrochemistry. However, the predictive design of heterogeneous catalysts is still challenging, owing to the lack of in-depth understanding of interfacial electronic states and electron transfer on cascade reaction in Li-S batteries. Here, a heterogeneous catalytic mediator based on monodispersed titanium carbide sub-nanoclusters embedded in titanium dioxide nanobelts is reported. The tunable catalytic and anchoring effects of the resulting catalyst are achieved by the redistribution of localized electrons caused by the abundant built-in fields in heterointerfaces. Subsequently, the resulting sulfur cathodes deliver an areal capacity of 5.6 mAh cm-2 and excellent stability at 1 C under sulfur loading of 8.0 mg cm-2 . The catalytic mechanism especially on enhancing the multiorder reaction kinetic of polysulfides is further demonstrated via operando time-resolved Raman spectroscopy during the reduction process in conjunction with theoretical analysis.

Integrated Gradient Cu Current Collector Enables Bottom-Up Li Growth for Li Metal Anodes: Role of Interfacial Structure

3D Cu current collectors have been demonstrated to improve the cycling stability of Li metal anodes, however, the role of their interfacial structure for Li deposition pattern has not been investigated thoroughly. Herein, a series of 3D integrated gradient Cu-based current collectors are fabricated by the electrochemical growth of CuO nanowire arrays on Cu foil (CuO@Cu), where their interfacial structures can be readily controlled by modulating the dispersities of the nanowire arrays. It is found that the interfacial structures constructed by sparse and dense dispersion of CuO nanowire arrays are both disadvantageous for the nucleation and deposition of Li metal, consequently fast dendrite growth. In contrast, a uniform and appropriate dispersity of CuO nanowire arrays enables stable bottom Li nucleation associated with smooth lateral deposition, affording the ideal bottom-up Li growth pattern. The optimized CuO@Cu-Li electrodes exhibit a highly reversible Li cycling including a coulombic efficiency of up to ≈99% after 150 cycles and a long-term lifespan of over 1200 h. When coupling with LiFePO4 cathode, the coin and pouch full-cells deliver outstanding cycling stability and rate capability. This work provides a new insight to design the gradient Cu current collectors toward high-performance Li metal anodes.

Unveiling light effect on formation of trisulfur radicals in lithium-sulfur batteries

is the important electrochemical intermediate in Li-S batteries of highly solvating solvents. Herein, the dissociation of into is deeply studied. light is proven to promote the formation of from the dissociation of . Accordingly, a strategy of pre-introducing highly active into DMSO-based electrolyte is proposed to activate sulfur cathodes of Li-S batteries.