Electrochemical Biomass Upgrading Coupled with Hydrogen Production under Industrial-Level Current Density

Molybdenum, tungsten doped cobalt phosphides as efficient catalysts for coproduction of hydrogen and formate by glycerol electrolysis

H2 and formate are important energy carriers in fuel-cells and feedstocks in chemical industry. The hydrogen evolution reaction (HER) coupling with electro-oxidative cleavage of thermodynamically favorable polyols is a promising way to coproduce H2 and formate via electrochemical means, highly active catalysts for HER and electrooxidative cleavage of polycols are the key to achieve such a goal. Herein, molybdenum (Mo), tungsten (W) doped cobalt phosphides (Co2P) deposited onto nickel foam (NF) substrate, denoted as Mo-Co2P/NF and W-Co2P/NF, respectively, were investigated as catalytic electrodes for HER and electrochemical glycerol oxidation reaction (GOR) to yield H2 and formate. The W-Co2P/NF electrode exhibited low overpotential (η) of 113 mV to attain a current density (J) of -100 mA cm-2 for HER, while the Mo-Co2P/NF electrode demonstrated high GOR efficiency for selective production of formate. In situ Raman and infrared spectroscopic characterizations revealed that the evolved CoO2 from Co2P is the genuine catalytic sites for GOR. The asymmetric electrolyzer based on W-Co2P/NF cathode and Mo-Co2P/NF anode delivered a J = 100 mA cm-2 at 1.8 V voltage for glycerol electrolysis, which led to 18.2 % reduced electricity consumption relative to water electrolysis. This work highlights the potential of heteroelement doped phosphide in catalytic performances for HER and GOR, and opens up new avenue to coproduce more widespread commodity chemicals via gentle and sustainable electrocatalytic means.

Improved Urea Oxidation Performance via Interface Electron Redistributions of the NiFe(OH)x/MnO2/NF p-p Heterojunction

The development of highly efficient urea oxidation reaction (UOR) electrocatalysts is the key to simultaneously achieving green hydrogen production and the treatment of urea-containing wastewater. Ni-based electrocatalysts are expected to replace precious metal catalysts for UOR because of their high activity and low cost. However, the construction of Ni-based electrocatalysts that can synergistically enhance UOR still needs further in-depth study. In this study, highly active electrocatalysts of NiFe(OH)x/MnO2 p-p heterostructures are constructed on nickel foam (NF) by electrodeposition (NiFe(OH)x/MnO2/NF), illustrating the effect of electronic structure changes at heterogeneous interfaces on UOR and revealing the catalytic mechanism of UOR. The NiFe(OH)x/MnO2/NF only needs 1.364 V (vs Reversible Hydrogen Electrode, RHE) to reach 10 mA cm-2 for UOR. Structural characterizations and theoretical calculations indicate that energy gap leads to directed charge transfer and redistribution at the heterojunction interface, forming electron-rich (MnO2) and electron-poor (NiFe(OH)x) regions. This enhances the catalyst's adsorption of urea and reaction intermediates, reduces thermodynamic barriers during the UOR process, promotes the formation of Ni3+ phases at lower potentials, and thus improves UOR performance. This work provides a new idea for the development of Ni-based high-efficiency UOR electrocatalysts.

Ruthenium-doped Ni(OH)2 to enhance the activity of methanol oxidation reaction and promote the efficiency of hydrogen production

The coupling of the hydrogen evolution reaction (HER) and methanol oxidation reaction (MOR) to produce clean hydrogen energy with value-added chemicals has attracted substantial attention. However, achieving high selectivity for formate production in the MOR and high faradaic efficiency for H2 evolution remain significant challenges. In light of this, this study constructs an Ru/Ni(OH)2/NF catalyst on nickel foam (NF) and evaluates its electrochemical performance in the MOR and HER under alkaline conditions. The results indicate that the synergistic effect of Ni(OH)2 and Ru can promote the catalytic activity. At an overpotential of only 42 mV, the current density for the HER reaches 10 mA cm-2. Moreover, in a KOH solution containing 1 M methanol, a potential of only 1.36 V vs. RHE is required to achieve an MOR current density of 10 mA cm-2. Using Ru/Ni(OH)2/NF as a bifunctional catalyst, employed as both the anode and cathode, an MOR-coupled HER electrolysis cell can achieve a current density of 10 mA cm-2 with a voltage of only 1.45 V. Importantly, the faradaic efficiency (FE) for the hydrogen production at the cathode and formate (HCOO-) production at the anode approaches 100%. Therefore, this study holds significant practical implications for the development of methanol electro-oxidation for formate-coupled water electrolysis hydrogen production technology.

Strengthening the Synergy between Oxygen Vacancies in Electrocatalysts for Efficient Glycerol Electrooxidation

Defect-engineered bimetallic oxides exhibit high potential for the electrolysis of small organic molecules. However, the ambiguity in the relationship between the defect density and electrocatalytic performance makes it challenging to control the final products of multi-step multi-electron reactions in such electrocatalytic systems. In this study, controllable kinetics reduction is used to maximize the oxygen vacancy density of a Cu─Co oxide nanosheet (CuCo2O4 NS), which is used to catalyze the glycerol electrooxidation reaction (GOR). The CuCo2O4-x NS with the highest oxygen-vacancy density (CuCo2O4-x-2) oxidizes C3 molecules to C1 molecules with selectivity of almost 100% and a Faradaic efficiency of ≈99%, showing the best oxidation performance among all the modified catalysts. Systems with multiple oxygen vacancies in close proximity to each other synergistically facilitate the cleavage of C─C bonds. Density functional theory calculations confirm the ability of closely spaced oxygen vacancies to facilitate charge transfer between the catalyst and several key glycolic-acid (GCA) intermediates of the GOR process, thereby facilitating the decomposition of C2 intermediates to C1 molecules. This study reveals qualitatively in tuning the density of oxygen vacancies for altering the reaction pathway of GOR by the synergistic effects of spatial proximity of high-density oxygen vacancies.

Construction of Ag─Co(OH)2 Tandem Heterogeneous Electrocatalyst Induced Aldehyde Oxidation and the Co-Activation of Reactants for Biomass Effective and Multi-Selective Upgrading

The electrocatalytic oxidation of 5-hydroxymethylfurfural (HMF) provides a feasible way for utilization of biomass resources. However, how to regulate the selective synthesis of multiple value-added products is still a great challenge. The cobalt-based compound is a promising catalyst due to its direct and indirect oxidation properties, but its weak adsorption capacity restricts its further development. Herein, by constructing Ag─Co(OH)2 heterogeneous catalyst, the efficient and selective synthesis of 5-hydroxymethyl-2-furanoic acid (HMFCA) and 2,5-furan dicarboxylic acid (FDCA) at different potential ranges are realized. Based on various physical characterizations, electrochemical measurements, and density functional theory calculations, it is proved that the addition of Ag can effectively promote the oxidation of aldehyde group to a carboxyl group, and then generate HMFCA at low potential. Moreover, the introduction of Ag can activate cobalt-based compounds, thus strengthening the adsorption of organic molecules and OH- species, and promoting the formation of FDCA. This work achieves the selective synthesis of two value-added chemicals by one tandem catalyst and deeply analyzes the adsorption enhancement mechanism of the catalyst, which provides a powerful guidance for the development of efficient heterogeneous catalysts.

Ru nanoparticles modified Ni3Se4/Ni(OH)2 heterostructure nanosheets: A fast kinetics boosted bifunctional overall water splitting electrocatalyst

Properly design and manufacture of bifunctional electrocatalysts with superb performance and endurance are crucial for overall water splitting. The interfacial engineering strategy is acknowledged as a promising approach to enhance catalytic performance of overall water splitting catalysts. Herein, the Ru nanoparticles modified Ni3Se4/Ni(OH)2 heterostructured nanosheets catalyst was constructed using a simple two-step hydrothermal process. The experimental results demonstrate that the abundant heterointerfaces between Ru and Ni3Se4/Ni(OH)2 can increase the number of active sites and effectively regulate the electronic structure, greatly accelerating the kinetics of the hydrogen evolution reaction (HER)/oxygen evolution reaction (OER). As a result, the Ru/Ni3Se4/Ni(OH)2/NF catalyst exhibits the low overpotential of 102.8 mV and 334.5 mV at 100 mA cm-2 for HER and OER in alkaline medium, respectively. Furthermore, a two-electrode system composed of the Ru/Ni3Se4/Ni(OH)2/NF requires a battery voltage of just 1.51 V at 10 mA cm-2 and remains stable for 200 h at 500 mA cm-2. This work provides an effective strategy for constructing Ru-based heterostructured catalysts with excellent catalytic activity.

Redox regulation of Ni hydroxides with controllable phase composition towards biomass-derived polyol electro-refinery

Electrocatalytic refinery from biomass-derived glycerol (GLY) to formic acid (FA), one of the most promising candidates for green H2 carriers, has driven widespread attention for its sustainability. Herein, we fabricated a series of monolithic Ni hydroxide-based electrocatalysts by a facile and in situ electrochemical method through the manipulation of local pH near the electrode. The as-synthesized Ni(OH)2@NF-1.0 affords a low working potential of 1.36 VRHE to achieve 100% GLY conversion, 98.5% FA yield, 96.1% faradaic efficiency and ∼0.13 A cm-2 of current density. Its high efficiency on a wide range of polyol substrates further underscores the promise of sustainable electro-refinery. Through a combinatory analysis via H2 temperature-programmed reduction, cyclic voltammetry and in situ Raman spectroscopy, the precise regulation of synthetic potential was discovered to be highly essential to controlling the content, phase composition and redox properties of Ni hydroxides, which significantly determine the catalytic performance. Additionally, the 'adsorption-activation' mode of ortho-di-hydroxyl groups during the C-C bond cleavage of polyols was proposed based on a series of probe reactions. This work illuminates an advanced path for designing non-noble-metal-based catalysts to facilitate electrochemical biomass valorization.

Ultrathin NiV Layered Double Hydroxide for Methanol Electrooxidation: Understanding the Proton Detachment Kinetics and Methanol Dehydrogenation Oxidation

Electrochemical methanol oxidation reaction (MOR) is regarded as a promising pathway to obtain value-added chemicals and drive cathodic H2 production, while the rational design of catalyst and in-depth understanding of the structure-activity relationship remains challenging. Herein, the ultrathin NiV-LDH (u-NiV-LDH) with abundant defects is successfully synthesized, and the defect-enriched structure is finely determined by X-ray adsorption fine structure etc. When applied for MOR, the as-prepared u-NiV-LDH presents a low potential of 1.41 V versus RHE at 100 mA cm-2, which is much lower than that of bulk NiV-LDH (1.75 V vs RHE) at the same current density. The yield of H2 and formate is 98.2% and 88.1% as its initial over five cycles and the ultrathin structure of u-NiV-LDH can be well maintained. Various operando experiments and theoretical calculations prove that the few-layer stacking structure makes u-NiV-LDH free from the interlayer hydrogen diffusion process and the hydrogen can be directly detached from LDH laminate. Moreover, the abundant surface defects upshift the d-band center of u-NiV-LDH and endow a higher local methanol concentration, resulting in an accelerated dehydrogenation kinetics on u-NiV-LDH. The synergy of the proton detachment from the laminate and the methanol dehydrogenation oxidation contributes to the excellent MOR performance of u-NiV-LDH.

Bifunctional Electrocatalysts for Overall and Hybrid Water Splitting

Electrocatalytic water splitting driven by renewable electricity has been recognized as a promising approach for green hydrogen production. Different from conventional strategies in developing electrocatalysts for the two half-reactions of water splitting (e.g., the hydrogen and oxygen evolution reactions, HER and OER) separately, there has been a growing interest in designing and developing bifunctional electrocatalysts, which are able to catalyze both the HER and OER. In addition, considering the high overpotentials required for OER while limited value of the produced oxygen, there is another rapidly growing interest in exploring alternative oxidation reactions to replace OER for hybrid water splitting toward energy-efficient hydrogen generation. This Review begins with an introduction on the fundamental aspects of water splitting, followed by a thorough discussion on various physicochemical characterization techniques that are frequently employed in probing the active sites, with an emphasis on the reconstruction of bifunctional electrocatalysts during redox electrolysis. The design, synthesis, and performance of diverse bifunctional electrocatalysts based on noble metals, nonprecious metals, and metal-free nanocarbons, for overall water splitting in acidic and alkaline electrolytes, are thoroughly summarized and compared. Next, their application toward hybrid water splitting is also presented, wherein the alternative anodic reactions include sacrificing agents oxidation, pollutants oxidative degradation, and organics oxidative upgrading. Finally, a concise statement on the current challenges and future opportunities of bifunctional electrocatalysts for both overall and hybrid water splitting is presented in the hope of guiding future endeavors in the quest for energy-efficient and sustainable green hydrogen production.

Efficient Noble-Metal-Free Integration Electrolysis for Solar H2 and Supercapacitor Electrode Coproduction in Acidic Water

Solar driven proton exchange membrane water electrolysis (PEMWE) is of great promise for stable and high-purity H2 production, but often limited by the serious partial loading issue due to the intermittent nature of solar energy, the kinetically sluggish oxygen evolution reaction (OER) and the usage of noble metal-based anodes (e. g., Pt, Ir, and Ru). Herein, we report an efficient integrated water electrolysis by replacing OER with favorable pyrrole electrooxidation polymerization for H2 generation in acidic solutions, wherein nonprecious Co2P and carbon cloth (CC) served as cathode and anode, respectively. A voltage of only 1.0 V was needed to afford 10 mA cm-2, 590 mV smaller than that in traditional PEMWE based on noble Pt/C@RuO2 benchmark couple. Moreover, simple carbonization of the resulting polypyrrole/CC at anode yielded a supercapacitor electrode with a high specific capacitance of 290 F g-1 at 1 A g-1 and robust stability, which then functioned as energy reservoir to alleviate the partial loading issue for coproduction of solar H2 and supercapacitor electrode.

Pd/NiMoO4/NF electrocatalysts for the efficient and ultra-stable synthesis and electrolyte-assisted extraction of glycolate

Electrocatalytic conversion of organic small molecules is a promising technique for value-added chemical productions but suffers from high precious metal consumption, poor stability of electrocatalysts and tedious product separation. Here, a Pd/NiMoO4/NF electrocatalyst with much lowered Pd loading amount (3.5 wt.%) has been developed for efficient, economic, and ultra-stable glycolate synthesis, which shows high Faradaic efficiency (98.9%), yield (98.8%), and ultrahigh stability (1500 h) towards electrocatalytic ethylene glycol oxidation. Moreover, the obtained glycolic acid has been converted to value-added sodium glycolate by in-situ acid-base reaction in the NaOH electrolyte, which is atomic efficient and needs no additional acid addition for product separation. Moreover, the weak adsorption of sodium glycolate on the catalyst surface plays a significant role in avoiding excessive oxidation and achieving high selectivity. This work may provide instructions for the electrocatalyst design as well as product separation for the electrocatalytic conversions of alcohols.

Galvanic replacement-induced preparation of bloom-like Pt23Ni77 for methanol coupled efficient hydrogen production

Galvanic replacement reaction (GRR) leverages the difference in metal reduction potentials to regulate the structure of nanomaterials. The crucial aspect of constructing highly active catalysts lies in the precise manipulation of both the oxidative dissolution of sacrificial template metals and reductive deposition of alternate metals. Herein, we investigated the morphological transformation of metal Ni as a sacrificial template in the presence of different amounts of H2PtCl6 solution and the Pt4+ substitution of Ni to achieve the redistribution of elements on the catalyst surface, which provides superior performance in both the methanol oxidation reaction (MOR) and hydrogen evolution reaction (HER). The uniform distribution of Pt on a three-dimensional transition metal Ni substrate allows for the complete exposure of the noble metal to the catalyst surface. This distribution increases the reaction area, facilitating easy access for reactants and promoting electron transfer. Meanwhile, Pt (1.39 Å) has a larger atomic radius compared to Ni (1.24 Å), and the substitution reaction in the transition metal phase induces strong compressive strain, which effectively regulates the electronic structure of Ni.

Synergistic Lewis and Brønsted Acid Sites Promote OH* Formation and Enhance Formate Selectivity: Towards High-efficiency Glycerol Valorization

As a sustainable valorization route, electrochemical glycerol oxidation reaction (GOR) involves in formation of key OH* and selective adsorption/cleavage of C-C(O) intermediates with multi-step electron transfer, thus suffering from high potential and poor formate selectivity for most non-noble-metal-based electrocatalysts. So, it remains challenging to understand the structure-property relationship as well as construct synergistic sites to realize high-activity and high-selectivity GOR. Herein, we successfully achieve dual-high performance with low potentials and superior formate selectivity for GOR by forming synergistic Lewis and Brønsted acid sites in Ni-alloyed Co-based spinel. The optimized NiCo oxide solid-acid electrocatalyst exhibits low reaction potential (1.219 V@10 mA/cm2) and high formate selectivity (94.0 %) toward GOR. In situ electrochemical impedance spectroscopy and pH-dependence measurements show that the Lewis acid centers could accelerate OH* production, while the Brønsted acid centers are proved to facilitate high-selectivity formation of formate. Theoretical calculations reveal that NiCo alloyed oxide shows appropriate d-band center, thus balancing adsorption/desorption of C-O intermediates. This study provides new insights into rationally designing solid-acid electrocatalysts for biomass electro-upcycling.

Coupling Ferricyanide/Ferrocyanide Redox Mediated Recycling Spent LiFePO4 with Hydrogen Production

Replacing the oxygen evolution reaction with thermodynamically more favorable alternative oxidation reactions offers a promising alternative to reduce the energy consumption of hydrogen production. However, questions remain regarding the economic viability of alternative oxidation reactions for industrial-scale hydrogen production. Here, we propose an innovative cost-effective, environment-friendly and energy-efficient strategy for simultaneous recycling of spent LiFePO4 (LFP) batteries and hydrogen production by coupling the spent LFP-assisted ferricyanide/ferrocyanide ([Fe(CN)6 ]4- /[Fe(CN)6 ]3- ) redox reaction. The onset potential for the electrooxidation of [Fe(CN)6 ]4- to [Fe(CN)6 ]3- is low at 0.87 V. Operando Raman and UV/Visible spectroscopy confirm that the presence of LFP in the electrolyte allows for the rapid reduction of [Fe(CN)6 ]3- to [Fe(CN)6 ]4- , thereby completing the [Fe(CN)6 ]4- /[Fe(CN)6 ]3- redox cycle as well as facilitating the conversion of spent LiFePO4 into LiOH ⋅ H2 O and FePO4 . The electrolyzer consumes 3.6 kWh of electricity per cubic meter of H2 produced at 300 mA cm-2 , which is 43 % less than conventional water electrolysis. Additionally, this recycling pathway for spent LFP batteries not only minimizes chemical consumption and prevents secondary pollution but also presents significant economic benefits.

Energy-Saving Electrochemical Hydrogen Production Coupled with Biomass-Derived Isobutanol Upgrading

The widespread application of electrochemical hydrogen production faces significant challenges, primarily attributed to the high overpotential of the oxygen evolution reaction (OER) in conventional water electrolysis. To address this issue, an effective strategy involves substituting OER with the value-added oxidation of biomass feedstock, reducing the energy requirements for electrochemical hydrogen production while simultaneously upgrading the biomass. Herein, we introduce an electrocatalytic approach for the value-added oxidation of isobutanol, a high energy density bio-fuel, coupled with hydrogen production. This approach offers a sustainable route to produce the valuable fine chemical isobutyric acid under mild condition. The electrodeposited Ni(OH)2 electrocatalyst exhibits exceptional electrocatalytic activity and durability for the electro-oxidation of isobutanol, achieving an impressive faradaic efficiency of up to 92.4 % for isobutyric acid at 1.45 V vs. RHE. Mechanistic insights reveal that side reactions predominantly stem from the oxidative C-C cleavage of isobutyraldehyde intermediate, forming by-products including formic acid and acetone. Furthermore, we demonstrate the electro-oxidation of isobutanol coupled with hydrogen production in a two-electrode undivided cell, notably reducing the electrolysis voltage by approximately 180 mV at 40 mA cm-2 . Overall, this work represents a significant step towards improving the cost-effectiveness of hydrogen production and advancing the conversion of bio-fuels.

Strain and Shell Thickness Engineering in Pd3 Pb@Pt Bifunctional Electrocatalyst for Ethanol Upgrading Coupled with Hydrogen Production

The ethanol oxidation reaction (EOR) is an attractive alternative to the sluggish oxygen evolution reaction in electrochemical hydrogen evolution cells. However, the development of high-performance bifunctional electrocatalysts for both EOR and hydrogen evolution reaction (HER) is a major challenge. Herein, the synthesis of Pd3 Pb@Pt core-shell nanocubes with controlled shell thickness by Pt-seeded epitaxial growth on intermetallic Pd3 Pb cores is reported. The lattice mismatch between the Pd3 Pb core and the Pt shell leads to the expansion of the Pt lattice. The synergistic effects between the tensile strain and the core-shell structures result in excellent electrocatalytic performance of Pd3 Pb@Pt catalysts for both EOR and HER. In particular, Pd3 Pb@Pt with three Pt atomic layers shows a mass activity of 8.60 A mg-1 Pd+Pt for ethanol upgrading to acetic acid and close to 100% of Faradic efficiency for HER. An EOR/HER electrolysis system is assembled using Pd3 Pb@Pt for both the anode and cathode, and it is shown that low cell voltage of 0.75 V is required to reach a current density of 10 mA cm-2 . The present work offers a promising strategy for the development of bifunctional catalysts for hybrid electrocatalytic reactions and beyond.

Hierarchical Ohmic Contact Interface Engineering for Efficient Hydrazine-Assisted Hydrogen Evolution Reaction

Hydrazine oxidation reaction coupled with hydrogen evolution reaction (HER) is an effective strategy to achieve low energy water splitting for hydrogen production. In order to realize the application of hydrazine-assisted HER system, researchers have been focusing on the development of electrocatalysts with integrated dual active sites, while the performance under high current density is still unsatisfying. In this work, hierarchical Ohmic contact interface engineering is designed and used as a bridge between the NiMo and Ni2 P heterojunction toward industrial current density applications, with the charge transfer impedance greatly eliminated via such a pathway with low energy barrier. As a proof-of-concept, the importance of charge redistribution and energy barrier at the Ohmic contact interface is investigated by significantly reducing the voltage of overall hydrazine splitting (OHzS) at high current density. Intriguingly, the NiMo/Ni2 P hierarchical Ohmic contact heterojunction can drive current densities of 100 and 500 mA cm-2 with only 181 and 343 mV cell voltage in the OHzS electrolyzer with high electrocatalytic stability. The proposed hierarchical Ohmic contact interface engineering paves new avenue for hydrogen production with low energy consumption.

Recent Advancements in Electrochemical Hydrogen Production via Hybrid Water Splitting

As one of the most promising approaches to producing high-purity hydrogen (H2 ), electrochemical water splitting powered by the renewable energy sources such as solar, wind, and hydroelectric power has attracted considerable interest over the past decade. However, the water electrolysis process is seriously hampered by the sluggish electrode reaction kinetics, especially the four-electron oxygen evolution reaction at the anode side, which induces a high reaction overpotential. Currently, the emerging hybrid electrochemical water splitting strategy is proposed by integrating thermodynamically favorable electro-oxidation reactions with hydrogen evolution reaction at the cathode, providing a new opportunity for energy-efficient H2 production. To achieve highly efficient and cost-effective hybrid water splitting toward large-scale practical H2 production, much work has been continuously done to exploit the alternative anodic oxidation reactions and cutting-edge electrocatalysts. This review will focus on recent developments on electrochemical H2 production coupled with alternative oxidation reactions, including the choice of anodic substrates, the investigation on electrocatalytic materials, and the deep understanding of the underlying reaction mechanisms. Finally, some insights into the scientific challenges now standing in the way of future advancement of the hybrid water electrolysis technique are shared, in the hope of inspiring further innovative efforts in this rapidly growing field.

Ambient γ-Rays-Mediated Noble-Metal Deposition on Defect-Rich Manganese Oxide for Glycerol-Assisted H2 Evolution at Industrial-Level Current Density

Developing novel synthesis technologies is crucial to expanding bifunctional electrocatalysts for energy-saving hydrogen production. Herein, we report an ambient and controllable γ-ray radiation reduction to synthesize a series of noble metal nanoparticles anchored on defect-rich manganese oxides (M@MnO2-x , M=Ru, Pt, Pd, Ir) for glycerol-assisted H2 evolution. Benefiting from the strong penetrability of γ-rays, nanoparticles and defect supports are formed simultaneously and bridged by metal-oxygen bonds, guaranteeing structural stability and active site exposure. The special Ru-O-Mn bonds activate the Ru and Mn sites in Ru@MnO2-x through strong interfacial coordination, driving glycerol electrolysis at low overpotential. Furthermore, only a low cell voltage of 1.68 V is required to achieve 0.5 A cm-2 in a continuous-flow electrolyzer system along with excellent stability. In situ spectroscopic analysis reveals that the strong interfacial coordination in Ru@MnO2-x balances the competitive adsorption of glycerol and OH* on the catalyst surface. Theoretical calculations further demonstrate that the defect-rich MnO2 support promotes the dissociation of H2 O, while the defect-regulated Ru sites promote deprotonation and hydrogen desorption, synergistically enhancing glycerol-assisted hydrogen production.

Amorphous Ni(OH)2 -Ni3 S2 /NF nano-flower heterostructure catalyst promotes efficient urea assisted overall water splitting

Urea assisted overall water splitting represents a cost-effective and efficient technology for hydrogen production, which not only obviates the generation of explosive H2 and O2 gas mixture but also minimizes the energy cost for the water splitting. In this study, we employed a one-pot hydrothermal method to directly synthesize Ni(OH)2 -Ni3 S2 /NF hybrid nanoflowers on a nickel foam (NF) substrate, resulting in efficient and stable bi-functional electrocatalysts for urea oxidation reaction (UOR) and hydrogen evolution reaction (HER). Under alkaline conditions, the Ni(OH)2 -Ni3 S2 /NF catalyst exhibits low voltage requirements of 1.346 V and -0.014 V vs. RHE with a current density of 10 mA cm-2 for UOR and HER, respectively. Furthermore, when employing the Ni(OH)2 -Ni3 S2 /NF catalyst as both anode and cathode for urea-assisted overall water splitting, it requires a cell voltage of merely 1.396 V with a current density of 10 mA cm-2 , which is notably lower than the voltage required for complete water decomposition at the same current density (1.568 V vs. RHE). The one-step synthesis of the Ni(OH)2 -Ni3 S2 /NF catalyst lays a foundation for further exploration of other transition metal complexes as dual-function electrocatalysts, enabling energy-efficient electrolytic hydrogen production and the treatment of urea-rich wastewater.

Self-Reconstruction of Sulfate-Terminated Copper Oxide Nanorods for Efficient and Stable 5-Hydroxymethylfurfural Electrooxidation

The electrochemical 5-hydroxymethylfurfural oxidation reaction (HMFOR) has been regarded as a viable alternative to sustainable biomass valorization. However, the transformation of the catalysts under harsh electrooxidation conditions remains controversial. Herein, we confirm the self-construction of cuprous sulfide nanosheets (Cu2S NSs) into sulfate-terminated copper oxide nanorods (CuO-SO42- NRs) during the first-cycle of the HMFOR, which achieves a near-quantitative synthesis of 2,5-furandicarboxylic acid (FDCA) with a >99.9% yield and faradaic efficiency without deactivation in 15 successive cycles. Electrochemical impedance spectroscopies confirm that the surface SO42- effectively reduces the onset potential for HMFOR, while in situ Raman spectroscopies identify a reversible transformation from CuII-O to CuIII-OOH in HMFOR. Furthermore, density functional theory calculations reveal that the surface SO42- weakens the Cu-OH bonds in CuOOH to promote the rate-determining step of its coupling with the C atom in HMF-H* resulting from HMF hydrogenation, which synergistically enhances the catalytic activity of CuO-SO42- NRs toward HMF-to-FDCA conversion.

Stabilizing Low-Valence Single Atoms by Constructing Metalloid Tungsten Carbide Supports for Efficient Hydrogen Oxidation and Evolution

Designing novel single-atom catalysts (SACs) supports to modulate the electronic structure is crucial to optimize the catalytic activity, but rather challenging. Herein, a general strategy is proposed to utilize the metalloid properties of supports to trap and stabilize single-atoms with low-valence states. A series of single-atoms supported on the surface of tungsten carbide (M-WCx , M=Ru, Ir, Pd) are rationally developed through a facile pyrolysis method. Benefiting from the metalloid properties of WCx , the single-atoms exhibit weak coordination with surface W and C atoms, resulting in the formation of low-valence active centers similar to metals. The unique metal-metal interaction effectively stabilizes the low-valence single atoms on the WCx surface and improves the electronic orbital energy level distribution of the active sites. As expected, the representative Ru-WCx exhibits superior mass activities of 7.84 and 62.52 A mgRu -1 for the hydrogen oxidation and evolution reactions (HOR/HER), respectively. In-depth mechanistic analysis demonstrates that an ideal dual-sites cooperative mechanism achieves a suitable adsorption balance of Had and OHad , resulting in an energetically favorable Volmer step. This work offers new guidance for the precise construction of highly active SACs.