The Enantioselective Addition of Alkyne Nucleophiles to Carbonyl Groups

Stereoselective Hydroxyallylation of Cyclopropenes with Cyclopropanols via NHC Catalysis of Transient Organozinc Species

A stereoselective hydroxyallylation reaction of cyclopropenes with cyclopropanols is achieved under zinc-mediated conditions, affording densely functionalized cyclopropanes with excellent diastereocontrol over three contiguous stereocenters within and outside the cyclopropane ring. A racemic variant of the reaction is synergistically promoted by catalytic N-heterocyclic carbene (NHC) and organic base, whereas chiral amino alcohol-derived bifunctional NHC enables a catalytic enantioselective variant. The reaction likely involves the generation of enolized zinc homoenolate via ring-opening of zinc cyclopropoxide and enolization of the resulting homoenolate, followed by its addition to the cyclopropene as a prochiral allylzinc nucleophile. Our mechanistic investigations highlighted the transient nature of enolized homoenolate, which, once generated from thermodynamically predominant cyclopropoxide, immediately proceeds to allylzincation with cyclopropene. The NHC not only promotes the rate-determining generation of enolized homoenolate but also engages in the allylzincation process. The resulting cyclopropylzinc species undergoes partial in situ protonation while partially remaining intact, thereby leaving an opportunity for trapping with an external electrophile.

Regioselective and enantioselective propargylic hydroxylations catalyzed by P450tol monooxygenases

Regioselective and enantioselective hydroxylation of propargylic C-H bonds are useful reactions but often lack appropriate catalysts. Here a green and efficient asymmetric hydroxylation of primary and secondary C-H bonds at propargylic positions has been established. A series of optically active propargylic alcohols were prepared with high regio- and enantioselectivity (up to 99% ee) under mild reaction conditions by using P450tol, while the C≡C bonds in the molecule remained unreacted. This protocol provides a green and practical method for constructing enantiomerically chiral propargylic alcohols. In addition, we also demonstrated that the biohydroxylation strategy was able to scaled up to 2.25 mmol scale with the production of chiral propargyl alcohol 2a at a yield of 196 mg with 96% ee, which's an important synthetic intermediate of antifungal drug Ravuconazole.

Catalytic Enantioselective Alkyne Addition to Nitrones Enabled by Tunable Axially Chiral Imidazole-Based P,N-Ligands

Although catalytic enantioselective alkyne addition is an established method for the synthesis of chiral propargylic alcohols and amines, addition to nitrones presents unique challenges, and no general chiral catalyst system has been developed. In this manuscript, we report the first Cu-catalyzed enantioselective alkyne addition to nitrones utilizing tunable axially chiral imidazole-based P,N-ligands. Our approach effectively overcomes difficulties in both reactivity and selectivity, resulting in a simple Cu-catalyzed protocol. The reaction accommodates a wide range of nitrones and alkynes, enabling the streamlined synthesis of chiral propargyl N-hydroxylamines via the enantioselective C-C bond formation. A diverse array of optically active nitrogen-containing compounds, including chiral hydroxylamines, can be accessed directly through facile transformations of the reaction products.

Enantioselective Synthesis of C2-Quaternary Indolin-3-ones by Pt-Catalyzed Alkynylation of 2-Aryl-3H-indol-3-one with Alkynylsilanes

An efficient method for the synthesis of five-membered chiral propargylic amines from 2-aryl-3H-indol-3-one and alkynylsilanes has been developed. The reaction proceeded under the catalytic system of PtCl4, oxazoline-based ligand L11, Zn(CF3COO)2, and AcOH in DCE at 95 °C via in situ desilylation of TMS-alkynes. This methodology also highlights a new protocol for the in situ desilylation of alkynylsilanes. The reaction showed a broad substrate scope with good yields and enantioselectivity.

Copper-Catalyzed Direct Asymmetric Vinylogous Mannich Reaction between β,γ-Alkynyl-α-ketimino Esters and β,γ-Unsaturated N-Acylpyrazoles

We report a Cu(I)-Ph-BPE-catalyzed asymmetric vinylogous Mannich reaction of β,γ-alkynyl-α-ketimino esters with β,γ-unsaturated N-acylpyrazoles. In this process, the Cu(I)-Ph-BPE catalyst activates the β,γ-alkynyl-α-ketimino ester through N,O-coordination, enabling the subsequent nucleophilic addition of a dienolate generated from the β,γ-unsaturated N-acylpyrazole via α-position deprotonation with a catalytic amount of tertiary amine. The reactions gave useful products with very high enantioselectivities. A broad range of substrates with various substituents are tolerated in this reaction. The versatility of this method was demonstrated by a gram-scale reaction, and subsequent elaboration of the Mannich adducts was also provided.

Thiuram Disulfide Mediated Cu-Catalyzed Amidation of Terminal Alkynes: An Efficient Synthesis of Alkynyl Amides

Terminal alkynes undergo a CO-free aminocarbonylation reaction mediated by thiuram disulfides. Thiuram disulfide acts as the source of the carbamoyl group in the amidation of terminal alkynes in the presence of copper-based reagent and catalyst. A series of alkynyl amides has been prepared with several structural variations following the current one-pot two-step protocol. The reaction proceeds through a mixed disulfide intermediate, which has been isolated and characterized by single-crystal XRD analysis.

Chiral Macrocyclic Catalysts for the Enantioselective Addition of Lithium Acetylides to Ketones

Alkynyl addition to carbonyl compounds is a valuable synthetic method for the preparation of versatile chiral alcohols that are widely found in pharmaceuticals and natural products. Although a variety of enantioselective variations have been reported, alkynyl addition to simple ketones remains an unmet challenge due to their low reactivity and difficult enantiofacial discrimination. Here, we report a method for the catalytic enantioselective addition of lithium acetylide to a variety of ketones using macrocyclic lithium binaphtholates as catalysts. These reactions generally suffer from facile aggregation of lithium species, which leads to less active and selective catalysts. The macrocyclic structure designed in this study prevents such aggregation, affording a monomeric and highly active catalyst that can furnish enantioenriched tertiary alcohols from a variety of ketones within 5-30 min. Moreover, the confined cavity and lipophilicity of the macrocycle confer substrate specificity on the system, demonstrating a multiselectivity similar to that of enzymatic reactions. Thus, these findings offer new insights into the rational design of small-molecule artificial enzymes that exhibit high levels of reactivity and multiselectivity.

Enantioselective Alkynylation of 2-Aryl-3H-indol-3-ones via Cooperative Catalysis of Copper/Chiral Phosphoric Acid

A facile enantioselective alkynylation of cyclic ketimines attached to a neutral functional group utilizing the dual Cu(I)-CPA catalysis is described. The strategy of the alkynylation of 2-aryl-3H-indol-3-one directly to chiral propargylic amines containing indolin-3-one moiety in good yields and enantioselectivities. Moreover, gram-scale synthesis of chiral propargylamines based C2-quaternary indolin-3-ones was performed. The synthetic applications were confirmed by transformations of the products with no decrease in the yield and enantioselectivity.

Enantioselective Transformations in the Synthesis of Therapeutic Agents

The proportion of approved chiral drugs and drug candidates under medical studies has surged dramatically over the past two decades. As a consequence, the efficient synthesis of enantiopure pharmaceuticals or their synthetic intermediates poses a profound challenge to medicinal and process chemists. The significant advancement in asymmetric catalysis has provided an effective and reliable solution to this challenge. The successful application of transition metal catalysis, organocatalysis, and biocatalysis to the medicinal and pharmaceutical industries has promoted drug discovery by efficient and precise preparation of enantio-enriched therapeutic agents, and facilitated the industrial production of active pharmaceutical ingredient in an economic and environmentally friendly fashion. The present review summarizes the most recent applications (2008-2022) of asymmetric catalysis in the pharmaceutical industry ranging from process scales to pilot and industrial levels. It also showcases the latest achievements and trends in the asymmetric synthesis of therapeutic agents with state of the art technologies of asymmetric catalysis.

Design principles of the use of alkynes in radical cascades

One of the simplest organic functional groups, the alkyne, offers a broad canvas for the design of cascade transformations in which up to three new bonds can be added to each of the two sterically unencumbered, energy-rich carbon atoms. However, kinetic protection provided by strong π-orbital overlap makes the design of new alkyne transformations a stereoelectronic puzzle, especially on multifunctional substrates. This Review describes the electronic properties contributing to the unique utility of alkynes in radical cascades. We describe how to control the selectivity of alkyne activation by various methods, from dynamic covalent chemistry with kinetic self-sorting to disappearing directing groups. Additionally, we demonstrate how the selection of reactive intermediates directly influences the propagation and termination of the cascade. Diverging from a common departure point, a carefully planned reaction route can allow access to a variety of products.

Coordination Assistance: A Powerful Strategy for Metal-Catalyzed Regio- and Enantioselective Hydroalkynylation of Internal Alkenes

ConspectusAlkenes are versatile compounds that are readily available on a large scale from industry or through organic synthesis. The widespread occurrence of alkenes provides the continuous impetus for the development of catalytic asymmetric alkene hydrofunctionalizations, which enables expeditious construction of complex chiral molecules from readily available starting materials. Catalytic asymmetric hydrofunctionalization of internal alkenes presents a notable challenge, due to their low reactivity, many potential side reactions, and the simultaneous control of the regio-, diastereo-, and enantioselectivities.Dehydroamino acids and enamides are among the first substrates that provide notable enantioselectivities in catalytic asymmetric hydrogenation. The crucial importance of an amide coordinating group is established by a series of classical mechanistic studies. This initial success greatly stimulated further development for catalytic hydrogenation and hydrofunctionalization. Building on these pioneering works in asymmetric hydrogenation as well as related hydrofunctionalizations, we have adopted coordination assistance as a powerful tool to address the challenges associated with the asymmetric hydrofunctionalization of internal alkenes. Using a functional group on the alkene substrate as a native coordinating group, a two-point binding mode of the substrate to the metal center effectively enhances the reactivity and facilitates the control of regio-, diastereo- and enantioselectivities. Through this strategy, we have developed a number of alkene hydrofunctionalization methods with excellent regio-, diastereo-, and enantiocontrols.In this Account, we summarize the recent advance in our lab using coordination assistance as a key element to achieve regio- and enantioselective hydroalkynylation of internal alkenes. First, we describe our early work aimed at controlling the regio- and enantioselectivity of hydroalkynylation using disubstituted enamide as the substrate. Both α- and β-alkynylation were achieved by channeling the reaction pathway into a Chalk-Harrod or modified Chalk-Harrod mechanism. Next, we discuss the further development of catalysts to achieve regiodivergent and enantioselective hydroalkynylation of trisubstituted enamide to access vicinal stereocenters and quaternary carbon stereocenters. We also discuss the hydroalkynylation of α,β-unsaturated amides to achieve unconventional site-selectivity through a combination of alkene isomerization and regioselective hydroalkynylation. This provides the basis for the construction of a remote quaternary carbon stereocenter through catalytic hydroalkynylation of trisubstituted β,γ-unsaturated amides. We further show that this controlling principle is applicable to terminal alkene with a coordinating group as well. A ligand-controlled mechanism shift is discussed for the enantioselective alkynylation at the terminal and internal position of 1,1,-disubstituted alkenes. Finally, we briefly mention the application of coordination assistance to other hydrofunctionalizations such as hydroboration and hydrosilylation, where previously inaccessible reactivity and selectivity were achieved. Collectively, these catalytic methods demonstrate the power of coordination assistance for enantioselective hydrofunctionalizations. We anticipate that this strategy will create a platform to enable diverse enantioselective alkene transformations.

Mechanistic Study of Asymmetric Alkynylation of Isatin-Derived Ketimine Mediated by a Copper/Guanidine Catalyst

In this work, we performed a mechanistic study of asymmetric alkynylation of isatin-derived N-Boc ketimine that was first reported by Feng, Liu, and co-workers (Chem. Commun. 2018, 54, 678-681). Guanidine-amide promoted the formation of highly nucleophilic copper acetylene species by abstracting the terminal proton of phenylacetylene with an imine moiety. The guanidinium salt-Cu(I) complex was the most active species in the addition of the C═N bond, in which copper acetylene coordinated to the O atom of the amide moiety, and the isatin-derived ketimine substrate was activated by hydrogen bonding as well as tert-butoxycarbonyl···Cu(I) coordination. Due to weak interaction between Cu(I) and the Ph group in the amide of guanidine, as well as the repulsion between the tert-butyl group in ketimine and the cyclohexyl group in guanidine, the copper acetylene preferred to attack isatin-derived ketimine from the re-face, leading to the S-configuration product with excellent stereoselectivity. The affinity of the counterion for the Cu(I) center in the copper salt affected the deprotonation of phenylacetylene and the formation of guanidinium salt active species. In contrast to CuBr and CuCl, the combination of CuI with aniline-derived guanidine-amide exhibited high catalytic activity and a chiral induction effect, contributing to a high turnover frequency (9.70 × 10^-4 s^-1) in catalysis and ee%.

Chiral α-Stereogenic Oxetanols and Azetidinols via Alcohol-Mediated Reductive Coupling of Allylic Acetates: Enantiotopic π-Facial Selection in Symmetric Ketone Addition

Iridium-tol-BINAP-catalyzed reductive coupling of allylic acetates with oxetanones and azetidinones mediated by 2-propanol provides chiral α-stereogenic oxetanols and azetidinols. As illustrated in 50 examples, complex, nitrogen-rich substituents that incorporate the top 10 N-heterocycles found in FDA-approved drugs are tolerated. In addition to 2-propanol-mediated reductive couplings, oxetanols and azetidinols may serve dually as reductant and ketone proelectrophiles in redox-neutral C-C couplings via hydrogen auto-transfer, as demonstrated by the conversion of dihydro-1a and dihydro-1b to adducts 3a and 4a, respectively. The present method delivers hitherto inaccessible chiral oxetanols and azetidinols, which are important bioisosteres.

Stereo- and Site-Selective Conversion of Primary Alcohols to Allylic Alcohols via Ruthenium-Catalyzed Hydrogen Auto-Transfer Mediated by 2-Butyne

The first enantioselective ruthenium-catalyzed carbonyl vinylations via hydrogen autotransfer are described. Using a ruthenium-JOSIPHOS catalyst, primary alcohols 2a-2m and 2-butyne 1a are converted to chiral allylic alcohols 3a-3m with excellent levels of absolute stereocontrol. Notably, 1°,2°-1,3-diols participate in site-selective C-C coupling, enabling asymmetric carbonyl vinylation beyond premetalated reagents, exogenous reductants, or hydroxyl protecting groups. Using 2-propanol as a reductant, aldehydes dehydro-2a, 2l participate in highly enantioselective 2-butyne-mediated vinylation under otherwise identical reaction conditions. Regio-, stereo-, and site-selective vinylations mediated by 2-pentyne 1b to form adducts 3n, 3o, and epi-3o also are described. The tiglyl alcohol motif obtained upon butyne-mediated vinylation, which is itself found in diverse secondary metabolites, may be converted to commonly encountered polyketide stereodiads, -triads, and -tetrads, as demonstrated by the formation of adducts 4a-4d. The collective mechanistic studies, including deuterium labeling experiments, corroborate a catalytic cycle involving alcohol dehydrogenation to form a transient aldehyde and a ruthenium hydride, which engages in alkyne hydrometalation to form a nucleophilic vinylruthenium species that enacts carbonyl addition. A stereochemical model for carbonyl addition invoking formyl CH···I[Ru] and CH···O≡C[Ru] hydrogen bonds is proposed based on prior calculations and crystallographic data.

Amide phosphonium salt catalyzed enantioselective Mannich addition of isoxazole-based nucleophiles to β,γ-alkynyl-α-ketimino esters

An enantioselective Mannich addition of 3,5-disubstituted 4-nitroisoxazoles to β,γ-alkynyl-α-ketimino esters promoted by an amide phosphonium salt-based catalyst has been developed. N-Cbz-protected ketimino esters with various aryl substituents attached to the alkyne unit were reacted with a series of isoxazoles with different substitution patterns. Chiral tertiary propargylic amine products were obtained with moderate to good yields and enantioselectivities. TIPS- and cyclopropyl-substituted alkynyl ketimines were also examined in the current system and the desired products were obtained with moderate yields and enantioselectivities. The potential scalability and utility of the current protocol were demonstrated by carrying out a relatively larger scale reaction followed by further transformations.

Ethynyl-SF4-Pyridines: Reagents for SF4-Alkynylation to Carbonyl Compounds

The trans-tetrafluoro-λ⁶-sulfanyl (SF₄) unit is medicinally attractive because of its high electronegativity, lipophilicity, and unique hypervalent structure. The trans-SF₄ unit can characteristically connect two independent molecules linearly. However, there is no example of the use of this unit for medicinal chemistry due to difficulties in synthesis. We report the first synthesis of (ethynyl-trans-tetrafluoro-λ⁶-sulfanyl)pyridines (t-ethynyl-SF₄-pyridines) and their use as versatile reagents for the first direct SF₄-alkynylation to carbonyl compounds. The addition reaction of t-ethynyl-SF₄-pyridines to the carbonyl group in the presence of MeLi smoothly afforded pyridine-SF₄-propargylic tertiary and secondary alcohols in high yields.

Asymmetric Synthesis of Propargylic α-Stereogenic Tertiary Amines by Reductive Alkynylation of Tertiary Amides Using Ir/Cu Tandem Catalysis

The development of an asymmetric protocol for the reductive alkynylation of amides to access important α-stereogenic tertiary propargylic amines is reported using a tandem Ir-catalyzed hydrosilylation/enantioselective Cu-catalyzed alkynylation. The reaction utilizes a Cu/PyBox catalyst system in the alkynylation step to achieve asymmetry and affords excellent yields with moderate to good levels of enantiocontrol while employing low Ir-catalyst loadings (0.5 mol %).

Enantioselective Iridium-Catalyzed Reductive Coupling of Dienes with Oxetanones and N-Acyl-Azetidinones Mediated by 2-Propanol

Cyclometallated iridium-PhanePhos complexes generated in situ from [Ir(cod)Cl]2 and (R)-PhanePhos catalyze 2-propanol-mediated reductive couplings of 2-substituted dienes with oxetanone and N-acyl-azetidinones to form branched homoallylic oxetanols and azetidinols with excellent control of regio- and enantioselectivity without C-C cleavage of the strained ring via enantiotopic π-facial selection of transient allyliridium nucleophiles. This work represents the first systematic study of enantioselective additions to symmetric ketones.

Confronting the Challenging Asymmetric Carbonyl 1,2-Addition Using Vinyl Heteroarene Pronucleophiles: Ligand-Controlled Regiodivergent Processes through a Dearomatized Allyl-Cu Species

The selective reductive coupling of vinyl heteroarenes with aldehydes and ketones represents a versatile approach for the rapid construction of enantiomerically enriched secondary and tertiary alcohols, respectively. Herein, we demonstrate a CuH-catalyzed regiodivergent coupling of vinyl heteroarenes with carbonyl-containing electrophiles, in which the selectivity is controlled by the ancillary ligand. This approach leverages an in situ generated benzyl- or dearomatized allyl-Cu intermediate, yielding either the dearomatized or exocyclic addition products, respectively. The method exhibits excellent regio-, diastereo-, and enantioselectivity and tolerates a range of common functional groups and heterocycles. The dearomative pathway allows direct access to a variety of functionalized saturated heterocyclic structures. The reaction mechanism was probed using a combination of experimental and computational approach. Density functional theory studies suggest that the ligand-controlled regioselectivity results from the C-H/π interaction and steric repulsion in transition states, leading to the major and minor regioisomers, respectively. Hydrocupration of vinyl heteroarene pronucleophile is the enantiodetermining step, whereas the diastereoselectivity is enforced by steric interactions between the benzylic or allyl-Cu intermediate and carbonyl-containing substrates in a six-membered cyclic transition state.

Triazole-estradiol analogs: A potential cancer therapeutic targeting ovarian and colorectal cancer

1,2,3-triazoles have continuously shown effectiveness as biologically active systems towards various cancers, and when used in combination with steroid skeletons as a carrier, which can act as a drug delivery system, allows for a creation of a novel set of analogs that may be useful as a pharmacophore leading to a potential treatment option for cancer. A common molecular target for cancer inhibition is that of the Epidermal Growth Factor Receptor/Mitogen Activated Protein Kinase pathways, as inhibition of these proteins is associated with a decrease in cell viability. Estradiol-Triazole analogs were thus designed using a molecular modeling approach. Thirteen of the high scoring analogs were then synthesized and tested in-vitro on an ovarian cancer cell line (A2780) and colorectal cancer cell line (HT-29). The most active compound, Fz25, shows low micromolar activity in both the ovarian (15.29 ± 2.19 µM) and colorectal lines (15.98 ± 0.39 µM). Mechanism of action studies proved that Fz25 moderately arrests cells in the G1 phase of the cell cycle, specifically inhibiting STAT3 in both cell lines. Additionally, Fz57 shows activity in the colorectal line (24.19 ± 1.37 µM). Inhibition studies in both cell lines show inhibition against various proteins in the EGFR pathway, namely EGFR, STAT3, ERK, and mTOR. To further study their effects as therapeutics, Fz25 and Fz57 were studied against drug efflux proteins, which are associated with drug resistance, and were found to inhibit the ABC transporter P-glycoprotein. We can conclude that these estradiol-triazole analogs provide a key for future studies targeting protein inhibition and drug resistance in cancer.

Copper-catalyzed asymmetric alkynylation of pyrazole-4,5-diones using chloramphenicol base-derived hydroxyl oxazoline ligands

The asymmetric copper-catalyzed alkynylation reactions of pyrazole 4,5-diones in the presence of hydroxyl oxazoline ligand, which was derived from low cost, easily accessible chloramphenicol base (ANP), were achieved. The notable...

Chiral Quaternary Ammoniums Derived from Dehydroabietylamine: Synthesis and Application to Alkynylation of Isatin Derivatives Catalyzed by Silver

Abietic acid and its derivatives have broadly been used in fine chemicals and are renewable resources. Its inherent chiral rigid tricyclic phenanthrene skeleton is unique. Its utilities in asymmetric catalysis remain to be explored. A series new amide-type chiral quaternary ammoniums bearing dehydroabietylamine were designed, and prepared by two convenient steps. Acylation of dehydroabietylamine with bromoacetyl chloride afforded amide holding bromoacetyl group in higher yields using triethyl amine as base. Subsequent quaternization reaction gave the desired amide-type chiral quaternary ammoniums. The new chiral quaternary ammoniums can be used as phase-transfer catalyst (PTC) for the transition metal-catalysed alkynylation of isatin derivatives.

Enantioselective decarboxylative Mannich reaction of β-keto acids with C-alkynyl N-Boc N,O-acetals: access to chiral β-keto propargylamines

The chiral keto-substituted propargylamines are an essential class of multifunctional compounds in the field of organic and pharmaceutical synthesis and have attracted considerable attention, but the related synthetic approaches remain limited. Therefore, a concise and efficient method for the enantioselective synthesis of β-keto propargylamines via chiral phosphoric acid-catalyzed asymmetric Mannich reaction between β-keto acids and C-alkynyl N-Boc N,O-acetals as easily available C-alkynyl imine precursors has been demonstrated here, affording a broad scope of β-keto N-Boc-propargylamines in high yields (up to 97%) with generally high enantioselectivities (up to 97 : 3 er).

Copper-catalyzed enantioselective carbonylation toward α-chiral secondary amides

Secondary amides are omnipresent structural motifs in peptides, natural products, pharmaceuticals, and agrochemicals. The copper-catalyzed enantioselective hydroaminocarbonylation of alkenes described in this study provides a direct and practical approach for the construction of α-chiral secondary amides. An electrophilic amine transfer reagent possessing a 4-(dimethylamino)benzoate group was the key to the success. This method also features broad functional group tolerance and proceeds under very mild conditions, affording a set of α-chiral secondary amides in high yields (up to 96% yield) with unprecedented levels of enantioselectivity (up to >99% ee). α,β-Unsaturated secondary amides can also be produced though the method by using alkynes as the substrate.

Asymmetric Deoxygenative Alkynylation of Tertiary Amides Enabled by Iridium/Copper Bimetallic Relay Catalysis

A variety of inert tertiary amides have been successfully transformed into synthetically important chiral propargylamines in high yields with good to excellent enantioselectivities via a relayed sequence of Ir catalyzed partial reduction and Cu/GARPHOS catalyzed asymmetric alkynylation with terminal alkynes. The reaction was readily extended to some drug molecules and the transformations of representative products have been demonstrated, thus attesting the practical utilities and the robust nature of the protocol.

Enantioselective Rh(II)-Catalyzed Desymmetric Cycloisomerization of Diynes: Constructing Furan-Fused Dihydropiperidines with an Alkyne-Substituted Aza-Quaternary Stereocenter

Described herein is an enantioselective dirhodium(II)-catalyzed cycloisomerization of diynes achieved by the strategy of desymmetrization, which not only represents a new cycloisomerization reaction of diynes but also constitutes the first Rh(II)-catalyzed asymmetric intramolecular cycloisomerization of 1,6-diynes. This protocol provides a range of valuable furan-fused dihydropiperidine derivatives with an enantiomerically enriched alkynyl-substituted aza-quaternary stereocenter in high efficiency, complete atom economy, and excellent enantioselectivity (up to 98% ee). Besides, the highly functionalized products could be easily transformed into various synthetically useful building blocks and conjugated with a series of pharmaceutical molecules. The mechanism involving a concerted [3+2] cycloaddition/[1,2]-H shift of the Rh(II) carbenoid intermediate was elucidated by DFT calculations and mechanistic studies. More importantly, the first single crystal of alkyne-dirhodium(II) was obtained to show that a η²-coordinating activation of alkynal by dirhodium(II) was involved. Weak hydrogen bondings between the carboxylate ligands and alkynal were found, which probably made the well-defined paddlewheel-like dirhodium(II) distinctive from other metal complexes in catalyzing this transformation. Furthermore, the origin of the enantioselectivity was elucidated by a Rh₂(R-PTAD)₄-alkyne complex and additional calculational studies.

Synthesis of Chiral Propargylamines, Chiral 1,2-Dihydronaphtho[2,1-b]furans and Naphtho[2,1-b]furans with C-Alkynyl N,N'-di-(tert-butoxycarbonyl)-aminals and β-Naphthols

Chiral phosphoric acid-catalyzed couplings of C-alkynyl N,N'-di-(tert-butoxycarbonyl)-aminals with β-naphthols led to chiral propargylamines in moderate to high yields with high to excellent enantioselectivity, in which the reactions underwent sequential chiral phosphoric acid-catalyzed in situ formation of N-(tert-butoxycarbonyl)-imines (N-Boc-imines) from the aminals, and 1,2-addition of β-naphthols to the N-Boc-imines. Chiral 1,2-dihydronaphtho[2,1-b]furans and naphtho[2,1-b]furans were prepared with satisfactory results when 10 mol% AgOAc and 20 mol% 2,6-lutidine or 1.2 equiv. of 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) were added to the resulting chiral propargylamines solution, respectively.

Access to enantioenriched compounds bearing challenging tetrasubstituted stereocenters via kinetic resolution of auxiliary adjacent alcohols

Contemporary asymmetric catalysis faces huge challenges when prochiral substrates bear electronically and sterically unbiased substituents and when substrates show low reactivities. One of the inherent limitations of chiral catalysts and ligands is their incapability in recognizing prochiral substrates bearing similar groups. This has rendered many enantiopure substances bearing several similar substituents inaccessible. Here we report the rationale, scope, and applications of the strategy of kinetic resolution of auxiliary adjacent alcohols (KRA*) that can be used to solve the above troubles. Using this method, a large variety of optically enriched tertiary alcohols, epoxides, esters, ketones, hydroxy ketones, epoxy ketones, β-ketoesters, and tetrasubstituted methane analogs with two, three, and four spatially and electronically similar groups can be readily obtained (totally 96 examples). At the current stage, the strategy serves as the optimal solution that can complement the inability caused by direct asymmetric catalysis in getting chiral molecules with challenging fully substituted stereocenters.

A large number of enantiopure substances, such as those with tetrasubstituted carbon centres bearing several similar substituents, are inaccessible due to the incapability of chiral catalysts/ligands to recognize those substrates. Here, the authors develop kinetic resolution of auxiliary adjacent alcohols (KRA*) strategy to access various optically enriched compounds with two, three or four spatially and electronically similar groups.

Enantioselective Conjugate Addition of Catalytically Generated Zinc Homoenolate

We report herein an enantioselective conjugate addition reaction of a zinc homoenolate, catalytically generated via ring opening of a cyclopropanol, to an α,β-unsaturated ketone. The reaction is promoted by a zinc aminoalkoxide catalyst generated from Et₂Zn and a chiral β-amino alcohol to afford 1,6-diketones, which undergo, upon heating, intramolecular aldol condensation to furnish highly substituted cyclopentene derivatives with good to high enantioselectivities. The reaction has proved applicable to various 1-substituted cyclopropanols as well as chalcones and related enones. The chiral amino alcohol has proved to enable ligand-accelerated catalysis of the homoenolate generation and its conjugate addition. Positive nonlinear effects and lower reactivity of a racemic catalyst have been observed, which can be attributed to a stable and inactive heterochiral zinc aminoalkoxide dimer.

Diastereo- and Enantioselective Ruthenium-Catalyzed C-C Coupling of 1-Arylpropynes and Alcohols: Alkynes as Chiral Allylmetal Precursors in Carbonyl anti-(α-Aryl)allylation

Highly tractable 1-aryl-1-propynes, which are readily accessible via Sonogashira coupling, serve as chiral allylmetal pronucleophiles in ruthenium-JOSIPHOS-catalyzed anti-diastereo- and enantioselective aldehyde (α-aryl)allylations with primary aliphatic or benzylic alcohol proelectrophiles. This method enables convergent construction of homoallylic sec-phenethyl alcohols bearing tertiary benzylic stereocenters. Both steric and electronic features of aryl sulfonic acid additives were shown to contribute to the efficiency with which a more selective and productive iodide-bound ruthenium catalyst is formed. As corroborated by isotopic labeling studies, a dual catalytic process is operative in which alkyne-to-allene isomerization is followed by allene-carbonyl reductive coupling via hydrogen auto-transfer. Crossover of ruthenium hydrides emanating from these two discrete catalytic events is observed. The utility of this method is illustrated by conversion of selected reaction products to the corresponding phenethylamines and the first total syntheses of the neolignan natural products (-)-crataegusanoids A-D.

Five-Step Enantioselective Synthesis of Islatravir via Asymmetric Ketone Alkynylation and an Ozonolysis Cascade

A 5-step enantioselective synthesis of the potent anti-HIV nucleoside islatravir is reported. The highly efficient route was enabled by a novel enantioselective alkynylation of an α,β-unsaturated ketone, a unique ozonolysis-dealkylation cascade in water, and an enzymatic aldol-glycosylation cascade.

Total and Formal Syntheses of Fostriecin

Two formal syntheses and one total synthesis of fostriecin (1) have been achieved, as well as, the synthesis of its related congener dihydro-dephospho-fostriecin. All the routes use the Sharpless dihydroxylation to set the absolute stereochemistry at C-8/9 positions and a Leighton allylation to set the C-5 position of the natural product. In the formal syntheses a Noyori transfer hydrogenation of an ynone was used to set the C-11 position while the total synthesis employed a combination of asymmetric dihydroxylation and Pd-π-allyl reduction to set the C-11 position. Finally in the total synthesis, a trans-hydroboration of the C-12/13 alkyne was used in combination with a Suzuki cross coupling to establish the Z,Z,E-triene of fostriecin (1).