Copper(I) Complexes Bearing Carbenes Beyond Classical N-Heterocyclic Carbenes: Synthesis and Catalytic Activity in “Click Chemistry”

Heteroleptic Silver(I) and Gold(I) N-Heterocyclic Carbene Complexes: Structural Characterization, Computational Analysis, Tyrosinase Inhibitory, and Biological Effects

Derivatization of (NHC)M-Cl (M = Ag, Au) with selected sulfur donors from the family of dialkyldithiophosphates and bis(2-mercapto-1-methylimidazolyl)borate ligands gave a series of heteroleptic mononuclear complexes. In single-crystal X-ray diffraction analysis, Ag(I) complexes adopted a trigonal planar geometry, while Au(I) complexes are near-linear. TD-DFT and hole-electron analyses of the selected complexes gave insight into the electronic features of the metal complexes. In vitro cellular tests were conducted on the human cancerous breast cell line MCF-7 using 2 and 8. The antibacterial activities of complexes 1, 2, 3, 7, 8, and IPr-Ag-Cl were also screened against Gram-positive (Staphylococcus aureus PTCC 1112) and Gram-negative (Escherichia coli PTCC 1330) bacteria. Antityrosinase and hemolytic effects of the selected compounds were also determined.

Dimerization and ring-opening in bis(diisopropylamino)cyclopropenylidene (BAC) mediated by [U(NR2)3(CCPh)] (R = SiMe3)

Addition of 2 equiv. of bis(diisopropylamino)cyclopropenylidene (BAC) to [U(NR2)3(CCPh)] (1, R = SiMe3), in Et2O, results in formation of [cyclo-N(iPr)C(Me)2CH(NiPr2)C{CHC3(NiPr2)2}][U(NR2)2(N(SiMe3)SiMe2CH2)(CCPh)] (2) in moderate isolated yield. Complex 2 is the result of coupling and protonation of two BAC molecules, where complex 1 contributes the required proton. It was characterized by NMR spectroscopy and X-ray crystallography and represents a new mode of reactivity of the cyclopropenylidene fragment.

Application of N-heterocyclic carbene-Cu(I) complexes as catalysts in organic synthesis: a review

N-Heterocyclic carbenes (NHCs) are a special type of carbenes in which the carbene carbon atom is part of the nitrogen heterocyclic ring. Due to the simplicity of their synthesis and the modularity of their stereoelectronic properties, NHCs have unquestionably emerged as one of the most fascinating and well-known species in chemical science. The remarkable stability of NHCs can be attributed to both kinetic as well as thermodynamic effects caused by its structural features. NHCs constitute a well-established class of new ligands in organometallic chemistry. Although initially NHCs were regarded as pure σ-donor ligands, later experimental and theoretical studies established the presence of a significant back donation from the d-orbital of the metal to the π* orbital of the NHC. Over the last two decades, NHC-metal complexes have been extensively used as efficient catalysts in different types of organic reactions. Of these, NHC-Cu(I) complexes found prominence for various reasons, such as ease of preparation, possibility of structural diversity, low cost, and versatile applications. This article overviews applications of NHC-Cu(I) complexes as catalysts in organic synthesis over the last 12 years, which include hydrosilylation reactions, conjugate addition, [3 + 2] cycloaddition, A3 reaction, boration and hydroboration, N-H and C(sp2)-H carboxylation, C(sp2)-H alkenylation and allylation, C(sp2)-H arylation, C(sp2)-H amidation, and C(sp2)-H thiolation. Preceding the section of applications, a brief description of the structure of NHCs, nature of NHC-metal bond, and methods of preparation of NHC-Cu complexes is provided.

Improved synthetic routes to N-heterocyclic carbene-metal-diketonato complexes of gold and copper

In our search for simple synthetic routes to N-heterocyclic carbene (NHC)-metal complexes and their derivatives, we herein report an operationally simple, expedient and scalable method to obtain the widely used NHC-metal-diketonates. The reported complexes are synthesized for the first time under mild, aerobic conditions and in excellent yields in a sustainable manner. The protocol is general with regards to the anionic co-ligand and the ancillary carbene ligands. The spectroscopic and crystallographic characterization of the complexes reveal a bidentate binding mode of the diketonate ligand to copper while the gold-congener is C-bound. Finally, the reported Au complex was shown to be an efficient pre-catalyst for the hydrocarboxylation of alkynes.

Copper-Catalyzed Azide–Alkyne Cycloaddition (CuAAC) by Functionalized NHC-Based Polynuclear Catalysts: Scope and Mechanistic Insights

Copper(I) [Cu₂(μ-Br)₂(^tBuImCH₂pyCH₂L)]_n (L = OMe, NEt₂, NH^tBu) compounds supported by flexible functionalized NHC-based polydentate ligands have been prepared in a one-pot procedure by reacting the corresponding imidazolium salt with an excess of copper powder and Ag₂O. An X-ray diffraction analysis has revealed that [Cu₂(μ-Br)₂(^tBuImCH₂pyCH₂NEt₂)]_n is a linear coordination polymer formed by bimetallic [Cu(μ-Br)]₂ units linked by the lutidine-based NHC-py-NEt₂ ligand, which acts as a heteroditopic ligand with a 1κC-2κ²N,N′ coordination mode. We propose that the polymeric compounds break down in the solution into more compact tetranuclear [Cu₂(μ-Br)₂(^tBuImCH₂pyCH₂L)]₂ compounds with a coordination mode identical to the functionalized NHC ligands. These compounds have been found to exhibit high catalytic activity in the Cu-catalyzed azide–alkyne cycloaddition (CuAAC) reaction. In particular, [Cu₂(μ-Br)₂(^tBuImCH₂pyCH₂NEt₂)]₂ efficiently catalyzes the click reaction of a range of azides and alkynes, under an inert atmosphere at room temperature in neat conditions at a very low catalyst loading, to quantitatively afford the corresponding 1,4-disubstituted 1,2,3-triazole derivatives in a few minutes. The cycloaddition reaction of benzyl azide to phenylacetylene can be performed at 25–50 ppm catalyst loading by increasing the reaction time and/or temperature. Reactivity studies have shown that the activation of the polynuclear catalyst precursor involves the alkyne deprotonation by the NHC moiety of the polydentate ligand to afford a copper(I)-alkynyl species bearing a functionalized imidazolium ligand. DFT calculations support the participation of the dinuclear species [(CuBr)₂(μ-^tBuImCH₂pyCH₂NEt₂)], resulting from the fragmentation of the tetranuclear compound, as the catalytically active species. The proposed reaction pathway proceeds through zwitterionic dinuclear intermediates and entails the active participation of both copper atoms, as well as the NHC moiety as an internal base, which activates the reacting alkyne via deprotonation.

Realizing 1,1‐Dehydration of Secondary Alcohols to Carbenes: Pyrrolidin‐2‐ols as a Source of Cyclic (Alkyl)(Amino)Carbenes

Herein we report secondary pyrrolidin‐2‐ols as a source of cyclic (alkyl)(amino)carbenes (CAAC) for the synthesis of CAAC‐Cu^I‐complexes and cyclic thiones when reacted with Cu^I‐salts and elemental sulfur, respectively, under reductive elimination of water from the carbon(IV)‐center. This result demonstrates a convenient and facile access to CAAC‐based Cu^I‐salts, which are well known catalysts for different organic transformations. It further establishes secondary alcohols to be a viable source of carbenes—realizing after 185 years Dumas’ dream who tried to prepare the parent carbene (CH₂) by 1,1‐dehydration of methanol. Addressed is also the reactivity of water towards CAACs, which proceeds through an oxidative addition of the O−H bond to the carbon(II)‐center. This emphasizes the ability of carbon‐compounds to mimic the reactivity of transition‐metal complexes: reversible oxidative addition and reductive elimination of the O−H bond to/from the C(II)/C(IV)‐centre.

Chemistry of Compounds Based on 1,2,3-Triazolylidene-Type Mesoionic Carbenes

Mesoionic carbenes (MICs) of the 1,2,3-triazolylidene type have established themselves as a popular class of compounds over the past decade. Primary reasons for this popularity are their modular synthesis and their strong donor properties. While such MICs have mostly been used in combination with transition metals, the past few years have also seen their utility together with main group elements. In this paper, we present an overview of the recent developments on this class of compounds that include, among others, (i) cationic and anionic MIC ligands, (ii) the donor/acceptor properties of these ligands with a focus on the several methods that are known for estimating such donor/acceptor properties, (iii) a detailed overview of 3d metal complexes and main group compounds with these MIC ligands, (iv) results on the redox and photophysical properties of compounds based on MIC ligands, and (v) an overview on electrocatalysis, redox-switchable catalysis, and small-molecule activation to highlight the applications of compounds based on MIC ligands in contemporary chemistry. By discussing several aspects from the synthetic, spectroscopic, and application point of view of these classes of compounds, we highlight the state of the art of compounds containing MICs and present a perspective for future research in this field.

A Bottleable Imidazole-Based Radical as a Single Electron Transfer Reagent

Reduction of 1,3-bis(2,6-diisopropylphenyl)-2,4-diphenyl-1H-imidazol-3-ium chloride (1) resulted in the formation of the first structurally characterized imidazole-based radical 2. 2 was established as a single electron transfer reagent by treating it with an acceptor molecule tetracyanoethylene. Moreover, radical 2 was utilized as an organic electron donor in a number of organic transformations such as in activation of an aryl-halide bond, alkene hydrosilylation, and in catalytic reduction of CO₂ to methoxyborane, all under ambient temperature and pressure.

Dinuclear Cu(I) Halides with Terphenyl Phosphines: Synthesis, Photophysical Studies, and Catalytic Applications in CuAAC Reactions

Several dinuclear terphenyl phosphine copper(I) halide complexes of composition [CuX(PR₂Ar')]₂ (X = Cl, Br, I; R = hydrocarbyl, Ar' = 2,6-diarylterphenyl radical), 1-5, have been isolated from the reaction of CuX with 1 equiv of the phosphine ligand. Most of them have been characterized by X-ray diffraction studies in the solid state, thus allowing comparative discussions of different structural parameters, namely, Cu···Cu and Cu···Aryl separations, conformations adopted by coordinated phosphines, and planarity of the Cu₂X₂ cores. Centrosymmetric complexes [CuI(PMe₂Ar^Xyl2)]₂, 1c, and [CuI(PEt₂Ar^Mes2)]₂, 3c, despite their similar structures, show very distinct photoluminescence (PL) in powder form at room temperature. The photophysical behavior of these compounds in liquid solution, solid-solid Zeonex solution and powder samples at room temperature and 77 K have been investigated and supported by DFT calculation. Identification of vibronic coupling modes, done by group theory calculations and the technique of projection operators, shows that the manifestation of these modes is conditioned by crystal packing. Complexes [CuI(PMe₂Ar^Xyl2)]₂, 1c, and [CuI(PEt₂Ar^Mes2)]₂, 3c, display remarkable activity in copper-catalyzed azide-alkyne cycloaddition reactions involving preformed and in situ-made azides. Reactions are performed in H₂O, under aerobic conditions, with low catalyst loadings and tolerate the use of iodoalkynes as substrates.

Mononuclear Cu Complexes Based on Nitrogen Heterocyclic Carbene: A Comprehensive Review

During the last decade, organometallic, coordination, and catalytic chemistry of the three-dimensional metals such as copper (Cu) has been greatly affected by the emergence of nitrogen heterocyclic carbene (NHC) complexes. The NHCs, and in particular the mononuclear Cu^I-based ones, have been proven vastly useful in several applications such as in biosynthesis, catalysis, photochemistry, etc. This review tries to thoroughly describe a series of mononuclear Cu^I NHC complexes and their subcategories such as heteroleptics, and bidentate and tridentate heteroatom complexes, and give some detailed insights on their development, emergence, and applications. A brief outlook is also disclosed to enable other researchers to further develop a platform for future advances and studies in the field of Cu^I-based NHCs.

Aerobic synthesis of N-sulfonylamidines mediated by N-heterocyclic carbene copper(I) catalysts

A new catalytic strategy for the one-pot synthesis of N-sulfonylamidines is described. The cationic copper(I) complexes were found to be highly active and efficient under mild conditions in air and in the absence of solvent. A copper acetylide is proposed as key intermediate in this transformation.

Stable abnormal N-heterocyclic carbenes and their applications

Although N-heterocyclic carbenes (NHCs) have been known as ligands for organometallic complexes since the 1960s, these carbenes did not attract considerable attention until Arduengo et al. reported the isolation of a metal-free imidazol-2-ylidene in 1991. In 2001 Crabtree et al. reported a few complexes featuring an NHC isomer, namely an imidazol-5-ylidene, also termed abnormal NHC (aNHCs). In 2009, it was shown that providing to protect the C-2 position of an imidazolium salt, the deprotonation occurred at the C-5 position, affording imidazol-5-ylidenes that could be isolated. Over the last ten years, stable aNHCs have been used for designing a range of catalysts employing Pd(ii), Cu(i), Ni(ii), Fe(0), Zn(ii), Ag(i), and Au(i/iii) metal based precursors. These catalysts were utilized for different organic transformations such as the Suzuki-Miyaura cross-coupling reaction, C-H bond activation, dehydrogenative coupling, Huisgen 1,3-dipolar cycloaddition (click reaction), hydroheteroarylation, hydrosilylation reaction and migratory insertion of carbenes. Main-group metal complexes were also synthesized, including K(i), Al(iii), Zn(ii), Sn(ii), Ge(ii), and Si(ii/iv). Among them, K(i), Al(iii), and Zn(ii) complexes were used for the polymerization of caprolactone and rac-lactide at room temperature. In addition, based on the superior nucleophilicity of aNHCs, relative to that of their nNHCs isomers, they were used for small molecules activation, such as carbon dioxide (CO₂), nitrous oxide (N₂O), tetrahydrofuran (THF), tetrahydrothiophene and 9-borabicyclo[3.3.1]nonane (9BBN). aNHCs have also been shown to be efficient metal-free catalysts for ring opening polymerization of different cyclic esters at room temperature; they are among the most active metal-free catalysts for ε-caprolactone polymerization. Recently, aNHCs successfully accomplished the metal-free catalytic formylation of amides using CO₂ and the catalytic reduction of carbon dioxide, including atmospheric CO₂, into methanol, under ambient conditions. Although other transition metal complexes featuring aNHCs as ligand have been prepared and used in catalysis, this review article summarize the results obtained with the isolated aNHCs.

Intramolecular Ring-Expansion Reaction (RER) and Intermolecular Coordination of In Situ Generated Cyclic (Amino)(aryl)carbenes (cAArCs)

Cyclic (amino)(aryl)carbenes (cAArCs) based on the isoindoline core were successfully generated in situ by α-elimination of 3-alkoxyisoindolines at high temperatures or by deprotonation of isoindol-2-ium chlorides with sodium or copper(I) acetates at low temperatures. 3-Alkoxy-isoindolines 2 a,b-OR (R=Me, Et, iPr) have been prepared in high yields by the addition of a solution of 2-aryl-1,1-diphenylisoindol-2-ium triflate (1 a,b-OTf; a: aryl=Dipp=2,6-diisopropylphenyl; b: Mesityl-, Mes=2,4,6-trimethylphenyl) to the corresponding alcohol (ROH) with NEt3 at room temperature. Furthermore, the reaction of 2 a,b-OMe in diethyl ether with a tenfold excess of hydrochloric acid led to the isolation of the isoindol-2-ium chlorides 1 a,b-Cl in high yields. The thermally generated cAArC reacts with sulfur to form the thioamide 3 a. Without any additional trapping reagent, in situ generation of 1,1-diphenylisoidolin-3-ylidenes does not lead to the isolation of these compounds, but to the reaction products of the insertion of the carbene carbon atom into an ortho C-H bond of a phenyl substituent, followed by ring-expansion reaction; namely, anthracene derivatives 9-N(H)aryl-10-Ph-C14 H8 4 a,b (a: Dipp; b: Mes). These compounds are conveniently synthesized by deprotonation of the isoindol-2-ium chlorides with sodium acetate in high yields. Deprotonation of 1 a-Cl with copper(I) acetate at low temperatures afforded a mixture of 4 a and the corresponding cAArC copper(I) chloride 5 a, and allowed the isolation and structural characterization of the first example of a cAArC copper complex of general formula [(cAArC)CuCl].

N-Heterocyclic Carbene Complexes of Copper, Nickel, and Cobalt

The emergence of N-heterocyclic carbenes as ligands across the Periodic Table had an impact on various aspects of the coordination, organometallic, and catalytic chemistry of the 3d metals, including Cu, Ni, and Co, both from the fundamental viewpoint but also in applications, including catalysis, photophysics, bioorganometallic chemistry, materials, etc. In this review, the emergence, development, and state of the art in these three areas are described in detail.

Cu–NHC azide complex: synthesis and reactivity

The first example of a NHC-based copper azide complex is reported. Its reactivity was investigated with various reagents affording 8 new complexes.

A dicopper(i)-dimesoionic carbene complex as a click catalyst: mechanistic implications

A dicopper(i) complex comprising a dimesoionic carbene and an acetate-bridge is synthesized and fully characterized.

Copper complexes of arylselenolate-based ligands: synthesis and catalytic activity in azide–alkyne cycloaddition reactions

Arylselenolate-based copper complexes have been synthesized and used as pre-catalysts for azide-alkyne cycloaddition reactions.

Mesoionic and Related Less Heteroatom-Stabilized N-Heterocyclic Carbene Complexes: Synthesis, Catalysis, and Other Applications

Mesoionic carbenes are a subclass of the family of N-heterocyclic carbenes that generally feature less heteroatom stabilization of the carbenic carbon and hence impart specific donor properties and reactivity schemes when coordinated to a transition metal. Therefore, mesoionic carbenes and their complexes have attracted considerable attention both from a fundamental point of view as well as for application in catalysis and beyond. As a follow-up of an earlier Chemical Reviews overview from 2009, the organometallic chemistry of N-heterocyclic carbenes with reduced heteroatom stabilization is compiled for the 2008-2017 period, including specifically the chemistry of complexes containing 1,2,3-triazolylidenes, 4-imidazolylidenes, and related 5-membered N-heterocyclic carbenes with reduced heteratom stabilization such as (is)oxazolylidenes, pyrrazolylidenes, and thiazolylidenes, as well as pyridylidenes as 6-membered N-heterocyclic carbenes with reduced heteroatom stabilization. For each ligand subclass, metalation strategies, electronic and steric properties, and applications, in particular, in metal-mediated catalysis, are compiled. Mesoionic carbenes demonstrate particularly high activity in (water) oxidation, hydrogen transfer reactions, and cyclization reactions. Unique features of these ligands are identified such as their dipolar structure, their specific donor properties, as well as stability aspects of the ligand and the complexes, which provides opportunities for further research.

Ring-Expanded N-Heterocyclic Carbenes for Copper-Mediated Azide-Alkyne Click Cycloaddition Reactions

A series of well-defined copper(I) complexes bearing ring-expanded N-heterocyclic carbene (NHC) ligands has been applied to the azide-alkyne cycloaddition reaction. The obtained results notably showed that the six-membered NHC ligands outperform well-established five-membered ones. [CuI(Mes-6)] displayed a remarkable catalytic activity while respecting the strict criteria for click reactions.

Synthesis and structures of gold and copper carbene intermediates in catalytic amination of alkynes

Metal carbenes are often proposed as reactive intermediates in the late transition metal-catalysed transformations of alkynes. Owing to their high reactivity, however, isolation and structural characterization of metal carbene intermediates in these transformations has remained unknown. Herein, we report the isolation of two acyclic gold and copper carbene intermediates in either Au(I)- or Cu(I)-catalysed cyclization of N-alkynyl formamidines through five-exo-dig cyclization. X-ray diffraction, ¹³C NMR spectra data and computational analyses provide evidence for the formation of a gold carbene intermediate with a carbocation-like electronic character. Using the intrinsic bond orbital (IBO) approach, we also evaluate the π-stabilizing effects of organic substituents at the carbene carbon atom in the gold carbene intermediate. Another rare six-membered copper carbene complex is also obtained through 6-endo-dig cyclization. These metal carbenes have proven reactive toward oxidation. The metal-promoted cyclization of N-alkynyl formamidine provides a facile approach to synthesize metal carbene species.

Metal carbenes are typically highly reactive and unstable species, proposed as intermediates in numerous catalytic processes. Here the authors report the isolation and characterization of gold and copper carbene intermediates involved in catalytic cyclization reactions.

Bis(Cyclic Alkyl Amino Carbene) Ruthenium Complexes: A Versatile, Highly Efficient Tool for Olefin Metathesis

The state-of-the-art in olefin metathesis is application of N-heterocyclic carbene (NHC)-containing ruthenium alkylidenes for the formation of internal C=C bonds and of cyclic alkyl amino carbene (CAAC)-containing ruthenium benzylidenes in the production of terminal olefins. A straightforward synthesis of bis(CAAC)Ru indenylidene complexes, which are highly effective in the formation of both terminal and internal C=C bonds at loadings as low as 1 ppm, is now reported.

A Cyclic Alkyl(amino)carbene as Two-Atom π-Chromophore Leading to the First Phosphorescent Linear CuI Complexes

The members of a series of linear and trigonal copper(I) complexes bearing a cyclic alkyl(amino)carbene (CAAC) ligand show surprising photophysical properties compared to those of the corresponding N-heterocyclic carbene (NHC) complexes. Whereas the linear NHC complexes [CuX(NHC)] are almost non-emissive, [CuX(CAAC)] (X=Cl, Br, I) and [Cu(CAAC)₂ ]PF₆ show very bright emissions from their triplet excited states in the blue to green region, displaying quantum yields of up to 65 % in the solid state, even though the π-acceptor comprises only the carbene C and N atoms with no other π conjugation. [Cu(CAAC)₂ ]PF₆ is the fastest Cu^I -based triplet state emitter characterized to date, not displaying thermally activated delayed fluorescence (TADF), with an intrinsic lifetime of only 10.6 μs, that is, k_r =9.4×10⁴  s^-1 , competitive with many Pt^II - and Ir^III -based emitters. In order to test the stability of such linear copper CAAC complexes in devices, some of our compounds have been applied in proof-of-principle organic light-emitting diodes (OLEDs). This case study thus demonstrates for the first time the use of CAACs as suitable π-chromophores for Cu^I -based phosphorescent emitters, and their implementation in OLEDs underlines the general applicability of this class of ligands in materials science.

Facile routes to abnormal-NHC-cobalt(ii) complexes

Deprotonation of 1 with Co{N(SiMe₃)₂}₂ affords aNHC-Co(ii) complex 2, whereas carbene transfer from 3 to Co{N(SiMe₃)₂}₂ enables access to complex 4.

5,5′-Bistriazoles as axially chiral, multidentate ligands: synthesis, configurational stability and catalytic application of their scandium(iii) complexes

The design and development of 5,5′-bistriazoles featuring aminomethyl substituents is discussed.