Iron-Catalyzed Sulfonylmethylation of Imidazo[1,2-α]pyridines with N,N-Dimethylacetamide and Sodium Sulfinates

Functionalized imidazo[1,2-α]pyridines are important scaffolds in pharmaceuticals. Herein, we present an efficient 3-sulfonylmethylation protocol for imidazo[1,2-α]pyridines by sodium sulfinates in DMA and H2O (2:1) via an FeCl3-catalyzed three-component coupling reaction. Various sulfonylmethyl imidazo[1,2-α]pyridines were thus afforded in high yields with excellent functional group tolerance. A plausible oxidation-addition mechanism was proposed.

Ketosulfonylmethylenation and sulfonylethyleneation of imidazoheterocycles with dimethylformamide as a methylene source

A hitherto unreported ketosulfonylmethylenation occurring at the C-3 position of imidazoheterocycles, with dimethylformamide as the methylene source was described. Using CoCl2·6H2O or Fe(acac)3 as efficient and inexpensive catalysts, some important biologically active methylenated compounds were prepared, with high efficacy, favorable functional group compatibilities, and a broad substrate scope.

Carboxylic Acid Functionalization Using Sulfoxonium Ylides as a Carbene Source

Functionalization of carboxylic acids using sulfoxonium ylides in the presence of [VO(acac)₂] as a catalyst is reported. The usual carbene source, diazo compounds, failed to produce α-carbonyloxy esters in good yield when compared to sulfoxonium ylides. Various standard spectroscopic and analytical techniques were used to characterize the products formed.

NHPI-catalyzed electrochemical C–H alkylation of indoles with alcohols to access di(indolyl)methanes via radical coupling

The present indirect electrochemically mediated radical protocol outperforms the traditional Friedel–Crafts route with a broad substrate scope and functional group tolerance, as well as facile gram-scale synthesis without metal contamination.

Controllable methylenation with ethylene glycol as the methylene source: bridging enaminones and synthesis of tetrahydropyrimidines

Controllable methylenation using renewable ethylene glycol as the methylene source has been developed for the introduction of one or two methylene building blocks.

Methylene-Tethered Arylsulfonation and Benzotriazolation of Aryl/Heteroaryl C-H Bonds with DMSO as a One-Carbon Surrogate

The Selectfluor-mediated approach toward the synthesis of methylene-tethered arylsulfonation and benzotriazolation of imidazopyridines has been described. The reaction involves imidazopyridine, aryl sulfinate, or benzotriazole and dimethyl sulfoxide (DMSO) in the presence of Selectfluor, where DMSO acts as a one-carbon synthon. The protocol has been extended to the methylene-tethered arylsulfonation and benzotriazolation of β-naphthols. The mechanistic insights show that the intermediate 3-((methylthio)methyl)-2-phenylimidazo[1,2-a]pyridine is generated from imidazopyridine, DMSO, and Selectfluor. The nucleophilic displacement by the aryl sulfinate salt or benzotriazole on the intermediate afforded the product.

On the application of 3d metals for C-H activation toward bioactive compounds: The key step for the synthesis of silver bullets

Several valuable biologically active molecules can be obtained through C-H activation processes. However, the use of expensive and not readily accessible catalysts complicates the process of pharmacological application of these compounds. A plausible way to overcome this issue is developing and using cheaper, more accessible, and equally effective catalysts. First-row transition (3d) metals have shown to be important catalysts in this matter. This review summarizes the use of 3d metal catalysts in C-H activation processes to obtain potentially (or proved) biologically active compounds.

KIO4 -mediated Selective Hydroxymethylation/Methylenation of Imidazo-Heteroarenes: A Greener Approach

Herein, we report a KIO₄ -mediated, sustainable and chemoselective approach for the one-pot C(sp² )-H bond hydroxymethylation or methylenation of imidazo-heteroarenes with formaldehyde, generated in situ via the oxidative cleavage of ethylene glycol or glycerol (renewable reagents) through the Malaprade reaction. In the presence of ethylene glycol, a series of 3-hydroxymethyl-imidazo-heteroarenes was obtained in good to excellent yields. These compounds are important intermediates to access pharmaceutical drugs, e.g., Zolpidem. Furthermore, by using glycerol, bis(imidazo[1,2-a]pyridin-3-yl)methane derivatives were selectively obtained in good to excellent yields.

Selectfluor facilitated bridging of indoles to bis(indolyl)methanes using methyl tert-butyl ether as a new methylene precursor

A novel, green and efficient method is developed for the synthesis of methylene bridged bis(indolyl)methanes in good to excellent yields. The reaction employs methyl tert-butyl ether (MTBE) as the methylene source and selectfluor as an oxidizing agent. The scope and versatility of the methods have been successfully demonstrated with 48 examples. The metal-free transformation process is suitable for scale-up production. A selectfluor-promoted oxidative reaction mechanism is proposed based on the results of the experimental studies.

Hypervalent iodine mediated synthesis of imidazo[1,2-a]pyridine ethers: consecutive methylene linkage and insertion of ethylene glycol

Hypervalent iodine mediated selective synthesis of imidazo[1,2-a]pyridine ethers using ethylene glycol as a methoxy ethanol source as well as solvent under metal-free conditions is described.

Copper Ferrite Superparamagnetic Nanoparticle-Catalyzed Cross-coupling Reaction to Form Diindolylmethane (DIM): Effect of Experimental Parameters

Superparamagnetic copper ferrite (CuFe2O4) nanoparticles were utilized as a heterogenous catalyst for the cross-coupling reaction of indole to form 3,3’-diindolylmethane (DIM) as the desirable product. High reaction yield, at around 82%, was achieved under optimal conditions. The CuFe2O4 material could be easily separated from the reaction mixture by an external magnetic field and could be reutilized several times without a significant decrease in catalytic activity. We also showed that no sites of catalyst material leached into reaction solution was detected. To our best knowledge, the above cross-coupling reaction was not previously conducted under catalysis of superparamagnetic nanoparticles. Copyright © 2021 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).

Oxidative sulfonamidomethylation of imidazopyridines utilizing methanol as the main C1 source

An efficient one pot, three component synthesis of C3 sulfonamidomethylated imidazopyridines has been disclosed under metal-free conditions, which utilized the commercially available and renewable reagent methanol as the main methylene source. A wide range of substituted imidazopyridines and sulfamides/amines were well tolerated to afford the corresponding products in up to 92% yield. In the isotopic labelling experiment, it was found that a minor part of the methylene also originated from DTBP. Moreover, the radical scavenger reactions were conducted, which suggested that a free-radical mechanism was probably not involved. The current methodology featured several advantages, including broad substrate scope, good functional group tolerance and high reaction efficiency.

Dual Role of Glyoxal in Metal-Free Dicarbonylation Reaction: Synthesis of Symmetrical and Unsymmetrical Dicarbonyl Imidazoheterocycles

A practical and efficient method has been developed for the dicarbonylation of imidazoheterocycles using glyoxals as dicarbonyl precursors under metal-free conditions in acetic acid. A series of symmetrical and unsymmetrical dicarbonyl imidazoheterocycles was synthesized in good yields. Aryl and alkyl glyoxals also demonstrated excellent reactivity under similar reaction conditions and delivered corresponding dicarbonyl imidazoheterocycles in high yields. It is believed that the glyoxal plays a dual role both as a dicarbonyl source and as an oxidant in this transformation. A probable mechanistic pathway has been proposed based on control experiments and electrospray ionization high-resolution mass spectrometry analysis.

Metal-free synthesis of aminomethylated imidazoheterocycles: dual role of tert-butyl hydroperoxide as both an oxidant and a methylene source

A novel and efficient aminomethylation approach has been developed for the regioselective functionalization of imidazoheterocycles under metal-free conditions. A wide range of imidazoheterocycles and 2/4-aminoazaheterocycles successfully provided corresponding aminomethylated imidazoheterocycles in moderate to excellent (33-80%) yields. The isotopic labelling study suggested that TBHP played a dual role as both an oxidant and a methylene source in this transformation. The developed protocol follows a radical pathway which is supported by radical trapping experiments.

Cu(ii)- or Co(ii)-Catalyzed C(SP3)–H oxidation of N,N-dimethylaminoethanol: facile synthesis of methylene-bridged biindoles and 3-formylindoles selectively

Methylene-bridged biindoles and 3-formylindoles were synthesized with high conversion rate and good regioselectivity using a new carbon donor N,N-dimethylethanolamine, catalyzed by CuCl₂ and CoCl₂ respectively.

3d Transition Metals for C-H Activation

C-H activation has surfaced as an increasingly powerful tool for molecular sciences, with notable applications to material sciences, crop protection, drug discovery, and pharmaceutical industries, among others. Despite major advances, the vast majority of these C-H functionalizations required precious 4d or 5d transition metal catalysts. Given the cost-effective and sustainable nature of earth-abundant first row transition metals, the development of less toxic, inexpensive 3d metal catalysts for C-H activation has gained considerable recent momentum as a significantly more environmentally-benign and economically-attractive alternative. Herein, we provide a comprehensive overview on first row transition metal catalysts for C-H activation until summer 2018.

Catalytic Applications of Vanadium: A Mechanistic Perspective

The chemistry of vanadium has seen remarkable activity in the past 50 years. In the present review, reactions catalyzed by homogeneous and supported vanadium complexes from 2008 to 2018 are summarized and discussed. Particular attention is given to mechanistic and kinetics studies of vanadium-catalyzed reactions including oxidations of alkanes, alkenes, arenes, alcohols, aldehydes, ketones, and sulfur species, as well as oxidative C-C and C-O bond cleavage, carbon-carbon bond formation, deoxydehydration, haloperoxidase, cyanation, hydrogenation, dehydrogenation, ring-opening metathesis polymerization, and oxo/imido heterometathesis. Additionally, insights into heterogeneous vanadium catalysis are provided when parallels can be drawn from the homogeneous literature.

One-Pot Tandem Amidation, Knoevenagel Condensation, and Palladium-Catalyzed Wacker Type Oxidation/C-O Coupling: Synthesis of Chromeno-Annulated Imidazopyridines

A direct one-pot synthesis of chromeno-annulated imidazo[1,2- a]pyridines is achieved by the reaction of 2-amino-1-(2-ethoxy-2-oxoethyl)pyridinium salts with 2-bromoarylaldehydes using Pd(TFA)₂ as a catalyst and Cu(OAc)₂ as an oxidant. The overall strategy involves tandem base-mediated amidation and Knoevenagel condensation, followed by palladium-catalyzed Wacker type oxidation and intramolecular C-O coupling reaction. The method is simple, tolerates different functional groups, and gives moderate to good yields of chromeno[2',3':4,5]imidazo[1,2- a]pyridin-12-one derivatives. The developed tandem reaction was also successfully applied for the synthesis of pyrano-fused imidazo[1,2- a]pyridines by using 3-bromo-3-arylacrylaldehydes.

Polystyrene supported palladium nanoparticles catalyzed cinnamic acid synthesis using maleic anhydride as a substitute for acrylic acid

Maleic anhydride as a substitute for acrylic acid for cinnamic acid synthesis was explored elaborating the combined role of the support and the catalyst.

Introducing tetramethylurea as a new methylene precursor: a microwave-assisted RuCl3-catalyzed cross dehydrogenative coupling approach to bis(indolyl)methanes

The microwave-assisted synthesis of symmetrical/unsymmetrical bis(indolyl)methanes using tetramethylurea as a methylene source.

H2O2/DMSO-Promoted Regioselective Synthesis of 3,3'-Bisimidazopyridinylmethanes via Intermolecular Oxidative C(sp(2))-H Bond Activation of Imidazoheterocycles

In the past decade, metal-free approaches for C-C bond formation have attracted a great deal of attention due to their ease of use and low cost. This report represents a novel and metal-free synthesis of 3,3'-bisimidazopyridinylmethanes via intermolecular oxidative C(sp(2))-H bond functionalization of imidazo[1,2-a]pyridines with dimethyl sulfoxide as the carbon synthon (CH2) using H2O2 as a mild oxidant under air. A library of 3,3'-bis(2-arylimidazo[1,2-a]pyridin-3-yl)methanes has been achieved in good to excellent yields. The present methodology has been successfully applied to imidazo[2,1-b]thiazoles and imidazo[2,1-b]benzothiazoles. Furthermore, the current approach was also extended for the synthesis of unsymmetrical 3,3'-bisimidazopyridinylmethanes under optimized reaction conditions. A mechanistic pathway is proposed on the basis of experiments with radical scavengers and DMSO-d6 and ESI-MS observations.