Recent Advances in Palladium-Catalyzed Cross-Coupling Reactions at ppm to ppb Molar Catalyst Loadings

Multiple neighboring active sites of an atomically precise copper nanocluster catalyst for efficient bond-forming reactions

Atomically precise copper nanoclusters (NCs) are an emerging class of nanomaterials for catalysis. Their versatile core-shell architecture opens the possibility of tailoring their catalytically active sites. Here, we introduce a core-shell copper nanocluster (CuNC), [Cu29(StBu)13Cl5(PPh3)4H10]tBuSO3 (StBu: tert-butylthiol; PPh3: triphenylphosphine), Cu29NC, with multiple accessible active sites on its shell. We show that this nanocluster is a versatile catalyst for C-heteroatom bond formation (C-O, C-N, and C-S) with several advantages over previous Cu systems. When supported, the cluster can also be reused as a heterogeneous catalyst without losing its efficiency, making it a hybrid homogeneous and heterogeneous catalyst. We elucidated the atomic-level mechanism of the catalysis using density functional theory (DFT) calculations based on the single crystal structure. We found that the cooperative action of multiple neighboring active sites is essential for the catalyst's efficiency. The calculations also revealed that oxidative addition is the rate-limiting step that is facilitated by the neighboring active sites of the Cu29NC, which highlights a unique advantage of nanoclusters over traditional copper catalysts. Our results demonstrate the potential of nanoclusters for enabling the rational atomically precise design and investigation of multi-site catalysts.

Recent Advancements in Continuous-Flow Suzuki-Miyaura Coupling Utilizing Immobilized Molecular Palladium Complexes

Immobilized Pd-catalyzed Suzuki-Miyaura coupling under continuous-flow conditions using a packed-bed reactor, representing an efficient, automated, practical, and safe technology compared to conventional batch-type reactions. The core objective of this study is the development of an active and durable catalyst. In contrast to supported Pd nanoparticles, the attachment of Pd complexes onto solid supports through well-defined coordination sites is considered a favorable approach for preparing highly dispersed and stabilized Pd species. These species can be directly employed in various flow reactions without the need for pre-treatment. This concept paper explores recent achievements involving the application of immobilized Pd complexes as precatalysts for continuous-flow Suzuki-Miyaura coupling. Our focus is to elucidate the significance of the designed catalyst structures in relation to their catalytic performance under flow conditions. Additionally, we highlight various reaction systems and catalyst packing methods, emphasizing their crucial roles in establishing a practical synthesis process.

Unveiling the promising anticancer activity of palladium(II)-aryl complexes bearing diphosphine ligands: a structure-activity relationship analysis

In continuation of our previous works on the cytotoxic properties of organopalladium compounds, in this contribution we describe the first systematic study of the anticancer activity of Pd(II)-aryl complexes. To this end, we have prepared and thoroughly characterized a wide range of palladium derivatives bearing different diphosphine, aryl and halide ligands, developing, when necessary, specific synthetic protocols. Most of the synthesized compounds showed remarkable cytotoxicity towards ovarian and breast cancer cell lines, with IC50 values often comparable to or lower than that of cisplatin. The most promising complexes ([PdI(Ph)(dppe)] and [PdI(p-CH3-Ph)(dppe)]), characterized by a diphosphine ligand with a low bite angle, exhibited, in addition to excellent cytotoxicity towards cancer cells, low activity on normal cells (MRC5 human lung fibroblasts). Specific immunofluorescence tests (cytochrome c and H2AX assays), performed to clarify the possible mechanism of action of this class of organopalladium derivatives, seemed to indicate DNA as the primary cellular target, whereas caspase 3/7 assays proved that the complex [PdI(Ph)(dppe)] was able to promote intrinsic apoptotic cell death. A detailed molecular docking analysis confirmed the importance of a diphosphine ligand with a reduced bite angle to ensure a strong DNA-complex interaction. Finally, one of the most promising complexes was tested towards patient-derived organoids, showing promising ex vivo cytotoxicity.

Continuous Direct Mechanocatalytic Suzuki-Miyaura Coupling via Twin-Screw Extrusion

This work establishes the first direct mechanocatalytic reaction protocol within an extruder, focusing on the Suzuki-Miyaura reaction. Through the coating of either the extruder screws or barrel with Pd, we executed the cross-coupling reaction without the reliance on molecular catalyst compounds or powders, and solvents continuously. We identified the influence and interplay of crucial reaction parameters such as temperature, mechanical energy input, residence time, rheology, and catalyst contact time and finally obtained 36 % and 75 % of the reaction product after one and four reactor passes respectively.

Transition-Metal Catalyzed Synthesis of Pyrimidines: Recent Advances, Mechanism, Scope and Future Perspectives

Pyrimidine is a pharmacologically important moiety that exhibits diverse biological activities. This review reflects the growing significance of transition metal-catalyzed reactions for the synthesis of pyrimidines (with no discussion being made on the transition metal-catalyzed functionalization of pyrimidines). The effect of different catalysts on the selectivity/yields of pyrimidines and catalyst recyclability (wherever applicable) are described, together with attempts to illustrate the role of the catalyst through mechanisms. Although several methods have been researched for synthesizing this privileged scaffold, there has been a considerable push to expand transition metal-catalyzed, sustainable, efficient and selective synthetic strategies leading to pyrimidines. The aim of the authors with this update (2017-2023) is to drive the designing of new transition metal-mediated protocols for pyrimidine synthesis.

Hydrocarbon Ionomeric Binders for Fuel Cells and Electrolyzers

Ionomeric binders in catalyst layers, abbreviated as ionomers, play an essential role in the performance of polymer-electrolyte membrane fuel cells and electrolyzers. Due to environmental issues associated with perfluoroalkyl substances, alternative hydrocarbon ionomers have drawn substantial attention over the past few years. This review surveys literature to discuss ionomer requirements for the electrodes of fuel cells and electrolyzers, highlighting design principles of hydrocarbon ionomers to guide the development of advanced hydrocarbon ionomers.

Towards "homeopathic" palladium-catalysed alkoxycarbonylation of aliphatic and aromatic olefins

Palladium-catalysed alkoxycarbonylation of alkenes allows for atom-efficient synthesis of esters from easily available alkenes in an industrially viable manner. One of the major costs associated with this process is the consumption of the catalyst system. Hence, for economic and ecologic reasons it is desirable to minimize the amount of metal and ligands wherever possible. Herein, we report "a homeopathic" palladium-catalysed alkoxycarbonylation of olefins under comparably mild conditions. The key to success is the homemade ligand LIKATphos providing good to excellent yields of ester products with catalyst turnover numbers in the range of 10⁶.

Mechanochemistry-Directed Ligand Design: Development of a High-Performance Phosphine Ligand for Palladium-Catalyzed Mechanochemical Organoboron Cross-Coupling

Mechanochemical synthesis that uses transition-metal catalysts has attracted significant attention due to its numerous advantages, including low solvent waste, short reaction times, and the avoidance of problems associated with the low solubility of starting materials. However, even though the mechanochemical reaction environment is largely different from that of homogeneous solution systems, transition-metal catalysts, which were originally developed for use in solution, have been used directly in mechanochemical reactions without any molecular-level modifications to ensure their suitability for mechanochemistry. Alas, this has limited the development of more efficient mechanochemical cross-coupling processes. Here, we report a conceptually distinct approach, whereby a mechanochemistry-directed design is used to develop ligands for mechanochemical Suzuki-Miyaura cross-coupling reactions. The ligand development was guided by the experimental observation of catalyst deactivation via the aggregation of palladium species, a problem that is particularly prominent in solid-state reactions. By embedding the ligand into a poly(ethylene glycol) (PEG) polymer, we found that phosphine-ligated palladium(0) species could be immobilized in the fluid phase created by the PEG chains, preventing the physical mixing of the catalyst into the crystalline solid phase and thus undesired catalyst deactivation. This catalytic system showed high catalytic activity in reactions of polyaromatic substrates close to room temperature. These substrates usually require elevated temperatures to be reactive in the presence of catalyst systems with conventional ligands such as SPhos. The present study hence provides important insights for the design of high-performance catalysts for solid-state reactions and has the potential to inspire the development of industrially attractive, almost solvent-free mechanochemical cross-coupling technologies.

Steric and electronic effects of arsa-Buchwald ligands on Suzuki-Miyaura coupling reaction

The Suzuki-Miyaura coupling (SMC) reaction is one of the most commonly used cross-coupling reactions. Bulky biaryldialkyl monophosphine ligands, i.e., Buchwald ligands, are beneficial for the SMC reaction. We recently developed a synthetic procedure for arsa-Buchwald ligands, arsenic analogs of Buchwald ligands, and found that these ligands are effective for sterically hindered substrates because of facilitating the transmetalation step owing to the longer arsenic-palladium bond. However, the relationship between the structure and steric/electronic properties of the arsa-Buchwald ligands has not yet been studied in detail. In this study, a series of arsa-Buchwald ligands with various alkyl substituents were synthesized. The cyclopentyl group afforded the highest catalytic activity for the SMC reaction, particularly with sterically hindered substrates. Furthermore, the steric/electronic properties of the arsa-Buchwald ligands were computationally analyzed.

Sustainable and practical formation of carbon-carbon and carbon-heteroatom bonds employing organo-alkali metal reagents

Metal-catalysed cross-coupling reactions are amongst the most widely used methods to directly construct new bonds. In this connection, sustainable and practical protocols, especially transition metal-catalysed cross-coupling reactions, have become the focus in many aspects of synthetic chemistry due to their high efficiency and atom economy. This review summarises recent advances from 2012 to 2022 in the formation of carbon-carbon bonds and carbon-heteroatom bonds by employing organo-alkali metal reagents.

Masuda Borylation–Suzuki Coupling (MBSC) Sequence: A One-Pot Process to Access Complex (hetero)Biaryls

The direct formation of (hetero)biaryls from readily available (hetero)aryl halides under mild reaction conditions can be efficiently achieved through the Masuda borylation–Suzuki coupling (MBSC) sequence. The MBSC sequence catenates Pd-catalyzed Masuda borylation and Suzuki coupling into a one-pot process, giving access to diverse symmetrically and unsymmetrically substituted scaffolds. (Hetero)biaryls are ubiquitous structural motifs that appear in natural products, pharmaceutically relevant scaffolds, functional dyes, and several other structures. This review summarizes the development of the MBSC sequence and its improvements over the past two decades.

New sustainable and robust catalytic supports for palladium nanoparticles generated from chitosan/cellulose film and corn stem biochar

The production of sustainable catalytic supports for palladium nanoparticles is always desired, even more so through the recovery of biomass residues. In this sense, two different solids were investigated - chitosan/cellulose film and corn stem biochar - as catalytic supports of palladium nanoparticles. The solids were carefully characterized and tested in the Suzuki-Miyaura reaction, a typical cross-coupling reaction. The developed catalytic systems proved to be efficient and sustainable, promoted the formation of target products very well, and demanded green reactants under environmentally appropriate conditions. With the results shown in the manuscript, it is expected to contribute to the valorization of biomass and agro-industrial residues in the development of new catalysts for the chemical industry.

Triazine: An Important Building Block of Organic Materials for Solar Cell Application

Since the beginning of the 21st century, triazine-based molecules have been employed to construct different organic materials due to their unique optoelectronic properties. Among their applications, photovoltaics stands out because of the current need to develop efficient, economic, and green alternatives to energy generation based mainly on fossil fuels. Here, we review all the development of triazine-based organic materials for solar cell applications, including organic solar cells, dye-sensitized solar cells, and perovskite solar cells. Firstly, we attempt to illustrate the main synthetic routes to prepare triazine derivatives. Then, we introduce the main aspects associated with solar cells and their performance. Afterward, we discuss different works focused on the preparation, characterization, and evaluation of triazine derivatives in solar cells, distinguishing the type of photovoltaics and the role of the triazine-based material in their performance (e.g., as a donor, acceptor, hole-transporting material, electron-transporting material, among others). Throughout this review, the progress, drawbacks, and main issues of the performance of the mentioned solar cells are exposed and discussed. Finally, some conclusions and perspectives about this research topic are mentioned.

Pd-Loaded Cellulose NanoSponge as a Heterogeneous Catalyst for Suzuki-Miyaura Coupling Reactions

The (eco)design and synthesis of durable heterogeneous catalysts starting from renewable sources derived from biomass waste represents an important step for reducing environmental impacts of organic transformations. Herein, we report the efficient loading of Pd(II) ions on an eco-safe cellulose-based organic support (CNS), obtained by thermal cross-linking between TEMPO-oxidized cellulose nanofibers and branched polyethyleneimine in the presence of citric acid. A 22.7% w/w Pd-loading on CNS was determined by the ICP-OES technique, while the metal distribution on the xerogel was evidenced by SEM-EDS analysis. XPS analysis confirmed the direct chelation of Pd(II) ions by means of the high number of amino groups present in the network, so that further functionalization of the support with specific ligands was not necessary. The new composite turned to be an efficient heterogeneous pre-catalyst for promoting Suzuki-Miyaura coupling reactions between aryl halides and phenyl boronic acid in water, obtaining yields higher than 90% in 30 min, by operating in a microwave reactor at 100 °C and with just 2% w/w of CNS-Pd catalyst with respect to aryl halides (4.5‱ for Pd). At the end of first reaction cycle, Pd(II) ions on the support resulted in being reduced to Pd(0) while maintaining the same catalytic efficiency. In fact, no leaching was observed at the end of reactions, and five cycles of recycling and reusing of CNS-Pd catalyst provided excellent results in terms of yields and selectivity in the desired products.

A palladium polyaniline complex: a simple and efficient catalyst for batch and flow Suzuki-Miyaura cross-couplings

A novel palladium polyaniline complex (Pd@PANI) was synthesized via a one-pot method using a low concentration of hydrogen peroxide (3 wt%) as a mild oxidant. Pd@PANI was employed to catalyze Suzuki-Miyaura cross-couplings with 0.11 ppm levels of palladium and high turnover numbers (up to 6.1 × 10⁴). Various aromatic halides and aromatic boric acids were used as reaction partners to prepare the biaryl compounds in high yields. Application of the method in the synthesis of D-fructose derivatives was also performed. Furthermore, the catalyst was evaluated under a flow process to provide the corresponding products in good yields with shorter residence times and lower temperatures in more convenient operations compared with the batch conditions.

Visible-Light Copper Nanocluster Catalysis for the C-N Coupling of Aryl Chlorides at Room Temperature

Activation of aryl chlorides in cross-coupling reactions is a long-standing challenge in organic synthesis that is of great interest to industry. Ultrasmall (<3 nm), atomically precise nanoclusters (NCs) are considered one of the most promising catalysts due to their high surface area and unsaturated active sites. Herein, we introduce a copper nanocluster-based catalyst, [Cu₆₁(S^tBu)₂₆S₆Cl₆H₁₄] (Cu₆₁NC) that enables C-N bond-forming reactions of aryl chlorides under visible-light irradiation at room temperature. A range of N-heterocyclic nucleophiles and electronically and sterically diverse aryl/hetero chlorides react in this new Cu₆₁NC-catalyzed process to afford the C-N coupling products in good yields. Mechanistic studies indicate that a single-electron-transfer (SET) process between the photoexcited Cu₆₁NC complex and aryl halide enables the C-N-arylation reaction.

C–Cl Oxidative Addition and C–C Reductive Elimination Reactions in the Context of the Rhodium-Promoted Direct Arylation

A cycle of stoichiometric elemental reactions defining the direct arylation promoted by a redox-pair Rh(I)–Rh(III) is reported. Starting from the rhodium(I)-aryl complex RhPh{κ³-P,O,P-[xant(PⁱPr₂)₂]} (xant(PⁱPr₂)₂ = 9,9-dimethyl-4,5-bis(diisopropylphosphino)xanthene), the reactions include C–Cl oxidative addition of organic chlorides, halide abstraction from the resulting six-coordinate rhodium(III) derivatives, C–C reductive coupling between the initial aryl ligand and the added organic group, oxidative addition of a C–H bond of a new arene, and deprotonation of the generated hydride-rhodium(III)-aryl species to form a new rhodium(I)-aryl derivative. In this context, the kinetics of the oxidative additions of 2-chloropyridine, chlorobenzene, benzyl chloride, and dichloromethane to RhPh{κ³-P,O,P-[xant(PⁱPr₂)₂]} and the C–C reductive eliminations of biphenyl and benzylbenzene from [RhPh₂{κ³-P,O,P-[xant(PⁱPr₂)₂]}]BF₄ and [RhPh(CH₂Ph){κ³-P,O,P-[xant(PⁱPr₂)₂]}]BF₄, respectively, have been studied. The oxidative additions generally involve the cis addition of the C–Cl bond of the organic chloride to the rhodium(I) complex, being kinetically controlled by the C–Cl bond dissociation energy; the weakest C–Cl bond is faster added. The C–C reductive elimination is kinetically governed by the dissociation energy of the formed bond. The C(sp³)–C(sp²) coupling to give benzylbenzene is faster than the C(sp²)–C(sp²) bond formation to afford biphenyl. In spite of that a most demanding orientation requirement is needed for the C(sp³)–C(sp²) coupling than for the C(sp²)–C(sp²) bond formation, the energetic effort for the pregeneration of the C(sp³)–C(sp²) bond is lower. As a result, the weakest C–C bond is formed faster.

An indole-amide-based phosphine ligand enabling a general palladium-catalyzed sterically hindered Suzuki-Miyaura cross-coupling reaction

A novel family of indole-amide-based phosphine ligands was designed and synthesized. The Pd/InAm-phos (L1) catalytic system exhibited excellent efficiency in the Suzuki-Miyaura cross-coupling of sterically hindered (hetero)aryl chlorides to synthesize tri-ortho-substituted biaryls. Excellent product yields were obtained in a short reaction time (e.g., 10 min), and a Pd catalyst loading down to 50 ppm was also achieved. The oxidative addition adduct of Pd-L1 with 2-chlorotoluene was also well-characterized by single-crystal X-ray crystallography and showed a κ²-P,O-coordination of L1 with palladium.

Preparation of Synthetic and Natural Derivatives of Flavonoids Using Suzuki-Miyaura Cross-Coupling Reaction

Herein, we report the use of the Suzuki–Miyaura cross-coupling reaction for the preparation of a library of synthetic derivatives of flavonoids for biological activity assays. We have investigated the reactivity of halogenated flavonoids with aryl boronates and with boronyl flavonoids. This reaction was used to prepare new synthetic derivatives of flavonoids substituted at C-8 with aryl, heteroaryl, alkyl, and boronate substituents. The formation of flavonoid boronate enabled a cross-coupling reaction with halogenated flavones yielding biflavonoids connected at C-8. This method was used for the preparation of natural compounds including C-8 prenylated compounds, such as sinoflavonoid NB. Flavonoid boronates were used for the preparation of rare C-8 hydroxyflavonoids (natural flavonoids gossypetin and hypolaetin). A series of previously unknown derivatives of quercetin and luteolin were prepared and fully characterized.

Synthesis of Novel (S)-3-(1-Aminoethyl)-8-pyrimidinyl-2-phenylisoquinolin-1(2H)-ones by Suzuki-Miyaura Coupling and Their Cell Toxicity Activities

A series of (S)-3-(1-aminoethyl)-8-pyrimidinyl-2-phenylisoquinoline-1(2H)-ones 3a-3k was synthesized in 40-98% yield through Suzuki-Miyaura coupling using Pd(PPh₃)₂Cl₂, Sphos, and K₂CO₃ in THF/H₂O mixed solvent. All newly synthesized compounds were evaluated for cell viability (IC₅₀) against MDA-MB-231, HeLa, and HepG2 cells. The antitumor activities of 3a-3k were improved when various pyrimidine motifs were introduced at position C-8 of the isoquinolinone ring.

Modulation of the photocatalytic activity and crystallinity of F-TiO2 nanoparticles by using green natural carboxylic acids

Ultrareactive F-doped mesoporous TiO2 nanoparticles with potential environmental applications have been synthesized using green natural carboxylic acids.

Ru(II)-catalyzed P(III)-assisted C8-alkylation of naphthphosphines

We report a phosphine-directed ruthenium-catalyzed C8-selective alkylation of naphthalenes with alkenes. This protocol provides a straightforward access to a large library of electron-rich C8-alkyl substituent 1-naphthphosphines, which outperformed commonly commercial...

An oxygen-bridged bimetallic [Cu–O–Se] catalyst for Sonogashira cross-coupling

Oxygen bridged bimetallic CuSeO3·2H2O catalyst is used for Sonogashira cross-coupling under ligand free condition. Catalyst is free from palladium up to 0.2 ppm.

Development of a Fluorescent Nanofibrous Template by In Situ SNAr Polymerization of Fluorine-Containing Terphenyls with Aliphatic Diols: Self-Assembly and Optical and Liquid Crystal Properties

Stimulus-responsive supramolecular organogels have been broadly studied, but the assembly of a liquid crystalline organogel with a thermoreversible response remains a challenge. This could be attributed to the difficulty of designing organogelators with liquid crystalline properties. Nucleophilic aromatic substitution (S_NAr) has been utilized to produce a diversity of pentafluorobenzene-containing aromatics, which are very regioselective to para positions. Those pentafluorobenzene-functionalized aromatics have been ideal compounds for the preparation of calamitic liquid crystals. In this context, novel fluoroterphenyl-containing main-chain polyether (FTP@PE) was synthesized using in situ S_NAr polymerization as a convenient and effective synthetic strategy toward the development of fluorescent liquid crystals bearing fluoroterphenyl and ether groups. The fluoroterphenyl unit was synthesized by Cu(I)-supported decarboxylation cross-coupling of potassium pentafluorobenzoate and 1,4-diiodobenzene. The chemical structures of FTP@PE were studied with ¹H/¹³C/¹⁹F nuclear magnetic resonance and infrared spectra. The liquid crystal mesophases were determined with differential scanning calorimetry and polarizing optical microscopy. Ultraviolet-visible absorbance and emission spectral profiles showed solvatochromic activity. The nanofibrous morphologies were studied with a scanning electron microscope. The organogels of FTP@PE were developed in a number of solvents via van der Waals attraction forces of aliphatic moieties and π stacking of fluoroterphenyl groups. They demonstrated thermoreversible responsiveness.

Triazine-wingtips accelerated NHC-Pd catalysed carbonylative Sonogashira cross-coupling reaction

The transmetalation as the rate-limiting step was effectively accelerated by newly designed N-heterocyclic carbenes with triazine wingtips (T-NHC). By using a ppm-level precatalyst T-NHC-Pd (8), the highly efficient coupling of aryl iodide, alkyne and carbon monoxide furnished a variety of ynone compounds. T-NHC-Pd (5), which deprotonated 4-methyl-phenylacetylene under mild conditions, converted into alkynyl-coordinated catalytic active species PdCl(T-NHC)(Py)(alkynyl). In the putative Pd/Pd catalytic cycle, both triazine-wingtips and NHCs are key players for establishing the carbonylative cross-couplings with high TON and TOF.

Site-Isolated Azobenzene-Containing Metal-Organic Framework for Cyclopalladated Catalyzed Suzuki-Miyuara Coupling in Flow

Sites isolation of active metals centers, systematically studied in homogeneous systems, has been an alternative to develop low metal consuming, highly active next generation catalysts in heterogeneous condition. Because of the high porosity and facile synthetic procedures, MOF-based catalysts are excellent candidates for heterogenization of well-defined homogeneous catalysts. Herein, we report the direct Pd coordination on the azobenzene linker within a MOF catalyst through a postsynthetic modification method for a Suzuki-Miyaura coupling reaction. The immobilized cyclopalladated complexes in MOFs were analyzed by a series of characterization techniques including XPS, PXRD, and deuterium NMR (2H NMR) spectroscopy. The heterogeneous nature of the catalyst as well as its stability were demonstrated though "hot filtration" and recycling experiments. Furthermore, we demonstrate that the MOF packed column promoted the reaction between phenyl boronic acid and bromobenzene under microflow conditions with a 85% yield continuously for 12 h. This work sheds light on the potential of site-isolated MOF catalysts in efficient, recyclable and continuous flow systems for industrial application.

An Expeditious Modular Hybrid Strategy for the Diversity-Oriented Synthesis of Lamellarins/Azalamellarins with Anticancer Cytotoxicity

A modular hybrid strategy has been developed for the diversity-oriented synthesis of lamellarins/azalamellarins. The common pentacyclic pyrrolodihydroisoquinoline lactone/lactam core was formed via the Michael addition/ring closure (Mi-RC) and the copper(I) thiophene-2-carboxylate (CuTC)-catalyzed C-O/C-N Ullmann coupling. Subsequent direct functionalization at C1, DDQ-mediated C5═C6 oxidation, and global deprotection of all benzyl-type O- and N-protecting groups furnished the desired lamellarins/azalamellarins. The late-stage functionalization at C1 provided a handle to accommodate a wider scope of functional groups as they need to tolerate only the DDQ oxidation and global deprotection. Moreover, with the C1-H pyrrole as the late-stage common intermediate, it was also possible to divergently exploit not only its nucleophilic nature to react with some electrophilic species but also some transition-metal-catalyzed cross-coupling reactions (via the intermediacy of the C1-iodopyrrole) to incorporate diversity at this position. Overall, this strategy simplifies the preparation of lamellarins/azalamellarins; including the Mi-RC, these C1-structurally diverse analogues could be prepared efficiently in 6-7 steps from the easily accessed 1-acetoxymethyldihydroisoquinoline and β-nitrocinnamate. Some selected azalamellarins were evaluated for their inhibitory effect against HeLa cervical cancer cells. An acute induction of intrinsic apoptosis was detected and may lead to growth suppression of or cytotoxicity against cancer cells.

Parts-per-Million-Level, Catalytic [3+2]-Annulations for the Asymmetric Synthesis of Methanobenzo[7]annulenes

3-Alkyl-lawsones selectively reacted with α-alkyl-nitroethylenes under 500 parts-per-million (ppm) quinine-NH-thiourea-catalysis to furnish the chiral methanobenzo[7]annulenes in up to >99 % ee with >20 : 1 dr and TON up to 1820 through tandem Michael/Henry [3+2]-annulations. These asymmetric ppm-level, catalytic tandem [3+2]-annulations would be highly inspirational for the design of many more ppm-level organocatalytic reactions, and at the same time these final molecules are basic skeletons of antibiotics.