Photoredox Catalysis at Copper(II) on Chitosan: Application to Photolatent CuAAC

An Atmospheric Water-Harvester with Ultrahigh Uptake-Release Efficiency at Low Humidity

Atmospheric water harvesting is a practical strategy that is achieved by removing materials from air moisture to relieve global water scarcity. Here we design a water-harvester (i.e., MOF-303/thiolated polymer composite (MTC)) by using a metal-organic framework (MOF-303) and thiolated chitosan (TC) skeleton. Intermolecular hydrogen bonding between TC and MOF-303 facilitates porous structures with enlarged air-polymer interfaces for long cycling life and high capacity at low relative humidity. Benefiting from synergetic effects on porosity and anchorage for accelerating the uptake-release of moisture, MTC exhibits a rapid water uptake capacity of 0.135 g/g in 60 min under 12.5 RH% and ultrafast water desorption kinetics of 0.003 g/g/min at 8.5 RH%, which is superior to the as-reported MOF-303 based adsorbents. At low heat (∼40 °C), the water desorption and collection rate, respectively, are 0.0195 and 0.0168 g/g/min within 210 min, showing ultrahigh harvesting efficiency. These results highlight the enormous potential as promising materials for solving the world's water scarcity crisis. This study offers an insight into the design of AWH materials, which can be extended into applications in some realms, e.g., freshwater development for industry in arid areas, water engineering-related devices and systems, etc.

Cellulose supported TiO2/Cu2O for highly asymmetric conjugate addition of α,β-unsaturated compounds in aqueous phase

A series of new kind green cellulose-supported bimetallic TiO2/Cu2O (Cell@TiO2/Cu2O) catalytic materials were obtained by in-situ reduction method employing cellulose as the carrier. The effects of metal percentage composition on the morphology and construction of the catalytic materials were systematically investigated. The Cell@TiO2/Cu2O were characterized by FT-IR, TG, XPS, SEM, TEM, EDS, and the element content was obtained by elemental analysis. Then, the achieved catalytic materials were applied to the chiral borylation reaction of α,β-unsaturated compounds, including nitrile compounds, esters, and α,β-unsaturated ketones. Remarkably, this approach provides an efficient strategy to gain an important class of chiral organic boron compounds with target chiral products in high yields as well as enantioselectivities. Besides, the Cell@TiO2/Cu2O could be easily recycled and effectively reused. This work constructed bimetallic TiO2/Cu2O on cellulose as a newly catalyst to obtain chiral boron compounds in aqueous phase.

Enhanced Gas Adsorption in HKUST-1@Chitosan Aerogels, Cryogels, and Xerogels: An Evaluation Study

This study investigates the use of chitosan hydrogel microspheres as a template for growing an extended network of MOF-type HKUST-1. Different drying methods (supercritical CO2, freeze-drying, and vacuum drying) were used to generate three-dimensional polysaccharide nanofibrils embedding MOF nanoclusters. The resulting HKUST-1@Chitosan beads exhibit uniform and stable loadings of HKUST-1 and were used for the adsorption of CO2, CH4, Xe, and Kr. The maximum adsorption capacity of CO2 was found to be 1.98 mmol·g-1 at 298 K and 1 bar, which is significantly higher than those of most MOF-based composite materials. Based on Henry's constants, thus-prepared HKUST-1@CS beads also exhibit fair selectivity for CO2 over CH4 and Xe over Kr, making them promising candidates for capture and separation applications.

A practical flow synthesis of 1,2,3-triazoles

A robust and versatile protocol for synthesis of 1-monosubstituted and 1,4-disubstituted 1H-1,2,3-triazoles was established under continuous flow conditions using copper-on-charcoal as a heterogeneous catalyst. This methodology allowed for the synthesis of a diverse set of substituted 1,2,3-triazoles with good functional group tolerance and high yields. 2-Ynoic acids were also used as small-chain alkyne donors in a decarboxylation/cycloaddition cascade, allowing gaseous reagents to be bypassed, delivering desired triazoles in high yields. The developed methodology was used to synthesize an antiepileptic agent, rufinamide, which was obtained in 96% isolated yield.

Copper-on-charcoal is an excellent heterogeneous catalyst for the alkyne–azide cycloaddition reaction performed under continuous flow conditions. 2-Ynoic acids undergo decarboxylation/cycloaddition cascade giving triazoles bearing small alkyl chains.

A Novel Truncated DNAzyme Modified Paper Analytical Device for Point-of-Care Test of Copper Ions in Natural Waters

On-site determination of trace copper ions in natural waters is of great significance to environmental monitoring, and how to develop accurate and specific point-of-care test methods is one critical issue. In the study, a paper-based analytical device (PAD) being modified with a new truncated DNAzyme (CLICK-T, which was derived from a reported DNAzyme-CLICK-17) was developed for Cu ions detection. The detection mechanism was based on Cu(II)-catalyzed azide-alkyne cycloaddition (Cu(II)AAC) reaction. It can directly conduct on-site analysis of Cu(II) ions based on fluorescent signals detected using a mobile phone. In the assay, the CLICK-T was firstly modified on the PADs. Then, water samples containing Cu ions mixed with 3-azido-7-hydroxycoumarin and 3-butyn-1-ol were instantly dripped on PADs and incubated for 20 min. Finally, the PADs were excited at 365 nm and emitted fluorescence which could be analyzed on site using smart phones. The Cu(II) concentration could be quantified through RGB analysis with the aid of iPhone APP software. The limit of detection is 0.1 µM by the naked eye due to the fact that CLICK-T exhibited a good catalytic effect on Cu(II)AAC. The Cu(II) concentration could also be directly detected without using reductant, such as ascorbic acid, which is prone to be oxidized in air. This simplifies the PDA detection process improves its efficiency. The PAD is convenient for the on-site analysis of Cu ions in natural waters.

Biocompatible photoinduced CuAAC using sodium pyruvate

Sodium pyruvate, a natural intermediate produced during cellular metabolism, is commonly used in buffer solutions and media for biochemical applications. Here we show the use of sodium pyruvate (SP) as a reducing agent in a biocompatible aqueous photoinduced azide-alkyne cycloaddition (CuAAC) reaction. This copper(I)-catalyzed 1,3-dipolar cycloaddition is triggered by SP under UV light irradiation, exhibits oxygen tolerance and temporal control, and provides a convenient alternative to current CuAAC systems, particularly for biomolecular conjugations.

A comprehensive survey upon diverse and prolific applications of chitosan-based catalytic systems in one-pot multi-component synthesis of heterocyclic rings

Heterocyclic compounds are among the most prestigious and valuable chemical molecules with diverse and magnificent applications in various sciences. Due to the remarkable and numerous properties of the heterocyclic frameworks, the development of efficient and convenient synthetic methods for the preparation of such outstanding compounds is of great importance. Undoubtedly, catalysis has a conspicuous role in modern chemical synthesis and green chemistry. Therefore, when designing a chemical reaction, choosing and or preparing powerful and environmentally benign simple catalysts or complicated catalytic systems for an acceleration of the chemical reaction is a pivotal part of work for synthetic chemists. Chitosan, as a biocompatible and biodegradable pseudo-natural polysaccharide is one of the excellent choices for the preparation of suitable catalytic systems due to its unique properties. In this review paper, every effort has been made to cover all research articles in the field of one-pot synthesis of heterocyclic frameworks in the presence of chitosan-based catalytic systems, which were published roughly by the first quarter of 2020. It is hoped that this review paper can be a little help to synthetic scientists, methodologists, and catalyst designers, both on the laboratory and industrial scales.

Mechanistic Insight into the Light-Triggered CuAAC Reaction: Does Any of the Photocatalyst Go?

The attainment of transition-metal catalysis and photoredox catalysis has represented a great challenge over the last years. Herein, we have been able to merge both catalytic processes into what we have called "the light-triggered CuAAC reaction". Particularly, the CuAAC reaction reveals opposite outcomes depending on the nature of the photocatalyst (eosin Y disodium salt and riboflavin tetraacetate) and additives (DABCO, Et₃N, and NaN₃) employed. To get a better insight into the operating processes, steady-state, time-resolved emission, and laser flash photolysis experiments have been performed to determine reactivity and kinetic data. These results, in agreement with thermodynamic estimations based on reported data, support the proposed mechanisms. While for eosin Y (EY), Cu(II) was reduced by its triplet excited state; for riboflavin tetraacetate (RFTA), mainly triplet excited RFTA state photoreductions by electron donors as additives are mandatory, affording RFTA^•- (from DABCO and NaN₃) or RFTAH^• (from Et₃N). Subsequently, these species are responsible for the reduction of Cu(II). For both photocatalysts, photogenerated Cu(I) finally renders 1,2,3-triazole as the final product. The determined kinetic rate constants allowed postulating plausible mechanisms in both cases, bringing to light the importance of kinetic studies to achieve a strong understanding of photoredox processes.

The A3 Redox-Neutral C1-Alkynylation of Tetrahydroisoquinolines: A Comparative Study between Visible Light Photocatalysis and Transition-Metal Catalysis

Considering the current challenges of the A3 redox-neutral C1-alkynylation of tetrahydroisoquinolines (THIQs), we studied this synthetic tool under visible light photocatalysis and transition-metal catalysis in order to describe alternative reaction conditions and discuss possible improvements to this process. We demonstrated that 1-alkynylated THIQs can be readily obtained by three different approaches: iridium-based photocatalysis and copper ([CuBr(PPh3)3]) and silver (AgNO3) catalysis under mild, selective and accessible reaction conditions. Among these approaches, the copper(I)-based methodology resulted in the most robust, optimal reaction conditions for the synthesis of a series of 18 1-alkynylated THIQs in moderate to excellent yields and with high selectivity for the endo-alkynylated products. Moreover, this reaction can be accelerated by microwave irradiation (120 °C, 15 min) affording a novel library of diverse THIQs with alkyne and N-substituent moieties, from unreactive and uncommon substrates, that could be further transformed into new compounds of interest.

Uniform Cu/chitosan beads as a green and reusable catalyst for facile synthesis of imines via oxidative coupling reaction

A nonprecious metal and biopolymer-based catalyst, Cu/chitosan beads, has been successfully prepared by using a software-controlled flow system. Uniform, spherical Cu/chitosan beads can be obtained with diameters in millimeter-scale and narrow size distribution (0.78 ± 0.04 mm). The size and morphology of the Cu/chitosan beads are reproducible due to high precision of the flow rate. In addition, the application of the Cu/chitosan beads as a green and reusable catalyst has been demonstrated using a convenient and efficient protocol for the direct synthesis of imines via the oxidative self- and cross-coupling of amines (24 examples) with moderate to excellent yields. Importantly, the beads are stable and could be reused more than ten times without loss of the catalytic performance. Furthermore, because of the bead morphology, the Cu/chitosan catalyst has greatly simplified recycling and workup procedures.

Uniform, spherical Cu/chitosan beads prepared using a software-controlled flow system as a green and conveniently recyclable catalyst for the efficient synthesis of various imines in short reaction time.