Transition Metal‐Free, Free‐Radical Sulfenylation of the α‐C( sp 3 )−H Bond in Arylacetamides and Its Application Toward 2‐Thiomethyl Benzoxazoles Synthesis

Pushing Boundaries: What's Next in Metal-Free C-H Functionalization for Sulfenylation?

The synthesis of thioether derivatives has been explored widely due to the potential application of these derivatives in medicinal chemistry, pharmaceutical industry and material chemistry. Within this context, there has been an increasing demand for the environmentally benign construction of C-S bonds via C-H functionalization under metal-free conditions. In the present article, we highlight recent developments in metal-free sulfenylation that have occurred in the past three years. The synthesis of organosulfur compounds via a metal-free approach using a variety of sulfur sources, including thiophenols, disulfides, sulfonyl hydrazides, sulfonyl chlorides, elemental sulfur and sulfinates, is discussed. Non-conventional strategies, which refer to the development of thioether derivatives under visible light and electrochemically mediated conditions, are also discussed. The key advantages of the reviewed methodologies include broad substrate scope and high reaction yields under environmentally benign conditions. This comprehensive review will provide chemists with a synthetic tool that will facilitate further development in this field.

Direct Access to Thio- and Seleno-acetamides Bearing (Benzo)thiazoles by a Base-Promoted One-Pot Two-Step Three-Component Reaction of 2-Amino(benzo)thiazoles with Aryl Acetyl Chlorides and Dichalcogenides

Highly efficient and practical carbon-chalcogen (S, Se) and amide bonds formation methodologies for the synthesis of thio- and seleno-acetamides were developed, via the base-promoted one-pot two-step reactions of 2-amino(benzo)thiazoles and aryl acetyl chlorides with dichalcogenides. This cross-coupling reaction afforded the goal products that had been chalcogenated regioselectively in moderate to good yields. Further transformations of the new synthesized compounds, DFT calculations and preliminary mechanism studies are discussed as well.

Transition metal-free C(sp3)-H selenation of β-ketosulfones

The installation of selenium groups has become an essential step across a number of industries such as agrochemicals, drug discovery, and materials. However, direct C(sp3)-H selenation, which is most atom economical, remains a formidable challenge, and only a few examples have been reported to date. In this article, we introduce the transition metal-free C(sp3)-H selenation with the easily available β-ketosulfones and diselenides as the material source. This benign protocol permits access to a broad spectrum of α-aryl(alkyl) seleno-β-ketosulfones in high yields with outstanding functional group compatibility. Distinct advantages of this protocol over all previous methods encompass the utilization of base and air as an oxidant, room temperature, and enhanced green chemistry matrices.

Selective Synthesis of Sulfonamides and Sulfenamides from Sodium Sulfinates and Amines

An effective method was explored for the selective synthesis of sulfonamides and sulfenamides using sodium sulfinates and amines as starting materials. This method offers mild reaction conditions, a broad substrate scope, high efficiency, and readily accessible materials, making it suitable and an alternative strategy for the preparation of a variety of biologically or pharmaceutically active compounds.

Bioinspired Functionalization of Carbonyl Compounds Enabled by Metal Chelated Bifunctional Ligands

In Nature, enzymatic reactions proceed through exceptionally ordered transition states giving rise to extraordinary levels of stereoselection. In those reactions, the active site of the enzyme plays crucial roles - through one position, it holds the substrate in the proximity to the reaction epicentre that facilitates both the reactivity and stereoselectivity of the chemical process. Inspired by this natural phenomenon, synthetic chemists have designed bifunctional ligands that not only coordinate to a metal centre but also preassociate with an organic substrate, for example aldehyde and ketone, and exerts stereodirecting influence to accelerate the attack of the incoming reacting partner from a particular enantiotopic face. The chief goal of the current review is to give an overview of the recently developed approaches enabled by privileged bio-inspired bifunctional ligands that not only bind to the metal catalyst but also activates carbonyl substrates via organocatalysis, thereby easing in the new bond forming step. As carbonyl α-functionalizations are dominated by enamine and enolate chemistry, the current review primarily focusses on enamine- and enolate-metal catalysis by bifunctional ligands. Thus, developments based on traditional cooperative catalysis occurring through two directly coupled but independent catalytic cycles of an organocatalyst and a metal catalyst are not covered.

Electronic nose application for detecting different odorants in source water: Possibility and scenario

The problem of taste and odor (T&O) in drinking water is a widespread societal concern and highlights substantial challenges related to the detection and evaluation of odor in water. In this study, the portable electronic nose PEN3, which is equipped with ten different heated metal sensors, was applied to analyze its applicability, feasibility and application scenarios for the detection of typical odorants, such as 2-methylisobornel (2-MIB), geosmin (GSM), β-cyclocitral, β-ionone, and other T&O compounds in source water, while avoiding uncertainties and instability related to manual inspection. All the T&O compounds could be effectively differentiated by principal component analysis (PCA). Linear discriminant analysis (LDA) showed that the odors varied greatly between different samples and could be effectively distinguished. As the odorant concentration increased, the sensor response intensity of the primary identification sensors R6 and R8 increased with a significant positive correlation. For Microcystis aeruginosa, an algae that produces odorants, PCA could distinguish the odors of algae at a series of densities at different concentrations. The responses of R10 showed a significant increase with increasing algae density, implying the production of more aliphatic hydrocarbons and other odor compounds. The results indicated that the electronic nose could provide a promising alternative to traditional unstable and complex detection methods for the detection of odorous substances in surface water and early warning of odor events. This study aimed to provide technical support for rapid monitoring and early warning of odorants in source water management.

Synergistic Visible Light and Pd-Catalyzed C-H Alkylation of 1-Naphthylamines with α-Diazoesters

The combination of visible light irradiation and Pd-catalysis has been practically employed for the C-H alkylation reactions of naphthylamines and α-diazo esters, leading to the synthesis of α-naphthyl functionalized acetates via C-C bond construction under mild reaction conditions and under solvent-free conditions. The light irradiation has been proven to play a pivotal role in the reactions, probably by promoting the generation of active carbene species from α-diazo esters.

DBU-Catalyzed Aerobic CDC Reaction of Thiophenols

A convenient method was developed for the preparation of thiolated compounds via a DBU-catalyzed aerobic cross-dehydrogenative coupling (CDC) reaction. The established protocol is environmentally friendly and operationally simple. Substrates like (hetero)aryl acetates, (hetero)aryl ketones, and indoles could be transformed into the corresponding thiolated products in moderate to high yields and further applied in the preparation of bioactive compounds in a prefunctionalization-free manner.

Iodine/TBHP-Mediated One-Pot Multicomponent Protocol for Tandem C-N and C-S Bond Formation To Access Sulfenylimidazo[1,5-a]pyridines via C-H Functionalization

A mild and simple protocol has been established for the formation of sulfenylated imidazo[1,5-a]pyridines. This is a metal-free iodine/TBHP-mediated one-pot multicomponent reaction, which follows C-H functionalization of the imidazo[1,5-a]pyridine skeleton formed during the reaction and its subsequent sulfenylation in the same step to offer sulfenylated imidazo[1,5-a]pyridines in good to high yields. The extension and applications of this method have also been demonstrated.

Metal-free three-component assemblies of anilines, α-keto acids and alkyl lactates for quinoline synthesis and their anti-inflammatory activity

A new and metal-free three-component method for the synthesis of 2,4-disubstituted quinolines via the reactions of anilines, α-keto acids and alkyl lactates is reported. The reactions proceed in the presence of p-toluene sulfonic acid (p-TSA) and tert-butyl peroxybenzoate (TBPB) to provide diverse quinoline products via the construction of new CC double, C-C single and CN double bonds without producing any organic mass-based side product. Notably, the anti-inflammatory activity of the quinolines has been investigated by measuring their ability to inhibit NO release by lipopolysaccharide (LPS) induced RAW264.7 cells, leading to the identification of 4i, 4t and 4x as potent anti-inflammatory compounds in vitro.

HOAc catalyzed three-component reaction for the synthesis of 3,3'-(arylmethylene)bis(1H-indoles)

An efficient HOAc catalyzed three-component reaction of 2-(arylethynyl)anilines with arylaldehydes has been achieved, which leads to the generation of 3,3'-(arylmethylene)bis(1H-indoles) with good to excellent yields and high regioselectivity under transition-metal-free conditions. Four new C-C and C-N bonds were effectively formed in a one-pot procedure. Subsequent research on the reaction mechanism indicated that the reaction likely involved the processes of intramolecular cyclization and cascade intermolecular dehydration condensation.

Enhancing the Extent of Enolization for α-C-H Bonds of Aliphatic Carboxylic Acid Equivalents via Ion Pair Catalysis: Application toward α-Chalcogenation

In general, the α-functionalization of carboxylic acid derivatives requires either a transition metal catalyst or a stoichiometric activating agent/strong base/external additive. A transition metal free α-chalcogenation of aliphatic carboxylic acid equivalents is reported herein via ion pair formation using K₃PO₄ as a catalyst. Mild conditions, broad scope, scalability of the process, attaining bioactive glucokinase activators, and some synthetic intermediates establish merits of the strategy.

Electrochemical Selective C3-Thiolation of Quinolines

An electrochemical method has been developed to achieve C3-thiolation of quinoline compounds. This new strategy highlights the maximum atom economy, direct conversion and also the use of simple and readily...

Catalyst-free aerobic radical cascade reactions of o-vinylphenylisocyanides with thiols to access 2-thio-substituted quinolines

We herein report an efficient and green aerobic radical cascade reaction of o-vinylphenylisocyanides with thiols to access a broad range of 2-thio-substituted quinolines without the need for additional catalysts or oxidants.