Influence of Poly(acrylic acid) on the Mechanical Properties of Composite Hydrogels

Comparative analysis of traction forces in normal and glaucomatous trabecular meshwork cells within a 3D, active fluid-structure interaction culture environment

This study presents a 3D in vitro cell culture model, meticulously 3D printed to replicate the conventional aqueous outflow pathway anatomical structure, facilitating the study of trabecular meshwork (TM) cellular responses under glaucomatous conditions. Glaucoma affects TM cell functionality, leading to extracellular matrix (ECM) stiffening, enhanced cell-ECM adhesion, and obstructed aqueous humor outflow. Our model, reconstructed from polyacrylamide gel with elastic moduli of 1.5 and 21.7 kPa, is based on serial block-face scanning electron microscopy images of the outflow pathway. It allows for quantifying 3D, depth-dependent, dynamic traction forces exerted by both normal and glaucomatous TM cells within an active fluid-structure interaction (FSI) environment. In our experimental design, we designed two scenarios: a control group with TM cells observed over 20 hours without flow (static setting), focusing on intrinsic cellular contractile forces, and a second scenario incorporating active FSI to evaluate its impact on traction forces (dynamic setting). Our observations revealed that active FSI results in higher traction forces (normal: 1.83-fold and glaucoma: 2.24-fold) and shear strains (normal: 1.81-fold and glaucoma: 2.41-fold), with stiffer substrates amplifying this effect. Glaucomatous cells consistently exhibited larger forces than normal cells. Increasing gel stiffness led to enhanced stress fiber formation in TM cells, particularly in glaucomatous cells. Exposure to active FSI dramatically altered actin organization in both normal and glaucomatous TM cells, particularly affecting cortical actin stress fiber arrangement. This model while preliminary offers a new method in understanding TM cell biomechanics and ECM stiffening in glaucoma, highlighting the importance of FSI in these processes. STATEMENT OF SIGNIFICANCE: This pioneering project presents an advanced 3D in vitro model, meticulously replicating the human trabecular meshwork's anatomy for glaucoma research. It enables precise quantification of cellular forces in a dynamic fluid-structure interaction, a leap forward from existing 2D models. This advancement promises significant insights into trabecular meshwork cell biomechanics and the stiffening of the extracellular matrix in glaucoma, offering potential pathways for innovative treatments. This research is positioned at the forefront of ocular disease study, with implications that extend to broader biomedical applications.

Dynamic traction force in trabecular meshwork cells: A 2D culture model for normal and glaucomatous states

Glaucoma, which is associated with intraocular pressure (IOP) elevation, results in trabecular meshwork (TM) cellular dysfunction, leading to increased rigidity of the extracellular matrix (ECM), larger adhesion forces between the TM cells and ECM, and higher resistance to aqueous humor drainage. TM cells sense the mechanical forces due to IOP dynamic and apply multidimensional forces on the ECM. Recognizing the importance of cellular forces in modulating various cellular activities and development, this study is aimed to develop a 2D in vitro cell culture model to calculate the 3D, depth-dependent, dynamic traction forces, tensile/compressive/shear strain of the normal and glaucomatous human TM cells within a deformable polyacrylamide (PAM) gel substrate. Normal and glaucomatous human TM cells were isolated, cultured, and seeded on top of the PAM gel substrate with embedded FluoSpheres, spanning elastic moduli of 1.5 to 80 kPa. Sixteen-hour post-seeding live confocal microscopy in an incubator was conducted to Z-stack image the 3D displacement map of the FluoSpheres within the PAM gels. Combined with the known PAM gel stiffness, we ascertained the 3D traction forces in the gel. Our results revealed meaningfully larger traction forces in the glaucomatous TM cells compared to the normal TM cells, reaching depths greater than 10-µm in the PAM gel substrate. Stress fibers in TM cells increased with gel rigidity, but diminished when stiffness rose from 20 to 80 kPa. The developed 2D cell culture model aids in understanding how altered mechanical properties in glaucoma impact TM cell behavior and aqueous humor outflow resistance. STATEMENT OF SIGNIFICANCE: Glaucoma, a leading cause of irreversible blindness, is intricately linked to elevated intraocular pressures and their subsequent cellular effects. The trabecular meshwork plays a pivotal role in this mechanism, particularly its interaction with the extracellular matrix. This research unveils an advanced 2D in vitro cell culture model that intricately maps the complex 3D forces exerted by trabecular meshwork cells on the extracellular matrix, offering unparalleled insights into the cellular biomechanics at play in both healthy and glaucomatous eyes. By discerning the changes in these forces across varying substrate stiffness levels, we bridge the gap in understanding between cellular mechanobiology and the onset of glaucoma. The findings stand as a beacon for potential therapeutic avenues, emphasizing the gravity of cellular/extracellular matrix interactions in glaucoma's pathogenesis and setting the stage for targeted interventions in its early stages.

Tribological Evaluation of Silica Nanoparticle Enhanced Bilayer Hydrogels as A Candidate for Cartilage Replacement

Polymeric hydrogels can be used as artificial replacement for lesioned cartilage. However, modulating the hydrogel formulation that mimics articular cartilage tissue with respect to mechanical and tribological properties has remained a challenge. This study encompasses the tribological evaluation of a silica nanoparticle (SNP) loaded bilayer nanocomposite hydrogel (NCH), synthesized using acrylamide, acrylic acid, and alginate via modulated free-radical polymerization. Multi-factor pin-on-plate sliding wear experiments were carried out with a steel ball counterface using a linear reciprocating tribometer. Tribological properties of NCHs with 0.6 wt% SNPs showed a significant improvement in the wear resistance of the lubricious layer and a low coefficient of friction (CoF). CoF of both non-reinforced hydrogel (NRH) and NCH at maximum contact pressure ranged from 0.006 to 0.008, which is in the order of the CoF of healthy articular cartilage. Interfacial surface energy was analysed according to Johnson, Kendall, and Robert’s theory, and NCHs showed superior mechanical properties and surface energy compared to NRHs. Lubrication regimes’ models were drawn based on the Stribeck chart parameters, and CoF results were highlighted in the elastoviscous transition regime.

Articular and Artificial Cartilage, Characteristics, Properties and Testing Approaches-A Review

The design and manufacture of artificial tissue for knee joints have been highlighted recently among researchers which necessitates an apt approach for its assessment. Even though most re-searches have focused on specific mechanical or tribological tests, other aspects have remained underexplored. In this review, elemental keys for design and testing artificial cartilage are dis-cussed and advanced methods addressed. Articular cartilage structure, its compositions in load-bearing and tribological properties of hydrogels, mechanical properties, test approaches and wear mechanisms are discussed. Bilayer hydrogels as a niche in tissue artificialization are presented, and recent gaps are assessed.

Moxifloxacin-imprinted silicone-based hydrogels as contact lens materials for extended drug release

Contact lenses may act as drug release platforms for the treatment of ocular infections, but there is still the need for extending their typical release periods and enhancing ocular bioavailability. The present study aimed to develop a molecularly imprinted silicone-based hydrogel to be used in the manufacturing of contact lenses that can be loaded efficiently and be able to release the antibiotic moxifloxacin hydrochloride (MXF) in a sustained way. A set of hydrogels was prepared by the molecular imprinting method using acrylic acid (AA) as the functional monomer for the specific recognition of MXF. The modified hydrogels loaded a higher amount of MXF, which was released for a longer time. In vitro experiments, using a microfluidic cell to mimic the ocular surface fluid turnover, showed that the imprinted hydrogel TRIS(300)-I prepared with the highest content in AA led to MXF concentrations in the release medium which were effective against S. aureus and S. epidermidis for about 2 weeks. Furthermore, some important properties such as water uptake, wettability, transmittance, ionic permeability, and Young´s modulus of the modified hydrogel remained within the range of values recommended for contact lenses. No cytotoxicity and no potential ocular irritancy effect were detected. Such hydrogel seems to be a promising alternative to the current options for the treatment of ocular infections.

Polymer Electrolyte Membranes Prepared by Graft Copolymerization of 2-Acrylamido-2-Methylpropane Sulfonic Acid and Acrylic Acid on PVDF and ETFE Activated by Electron Beam Treatment

Polymer electrolyte membranes (PEM) for potential applications in fuel cells or vanadium redox flow batteries were synthesized and characterized. ETFE (poly (ethylene-alt-tetrafluoroethylene)) and PVDF (poly (vinylidene fluoride)) serving as base materials were activated by electron beam treatment with doses ranging from 50 to 200 kGy and subsequently grafted via radical copolymerization with the functional monomers 2-acrylamido-2-methylpropane sulfonic acid and acrylic acid in aqueous phase. Since protogenic groups are already contained in the monomers, a subsequent sulfonation step is omitted. The mechanical properties were studied via tensile strength measurements. The electrochemical performance of the PEMs was evaluated by electrochemical impedance spectroscopy and fuel cell tests. The proton conductivities and ion exchange capacities are competitive with Nafion 117, the standard material used today.

Synthesis and self-assembly of carbamoylmethylphosphonate acrylamide-based diblock copolymers: new valuable thermosensitive materials

We report the synthesis by RAFT polymerization of well-defined diblock copolymers bearing carbamoylmethylphosphonate moieties which proved to sorb gadolinium. These poly(diethyl-6-(acrylamido)hexylcarbamoylmethylphosphonate-b-acrylic acid) (P(CPAAm6C-b-AA)) copolymers were able to self-assemble as a function of temperature, above their cloud point value.

Cylindrical agar gel with fluid flow subjected to an alternating magnetic field during hyperthermia

PURPOSE

In magnetic fluid hyperthermia (MFH), nanoparticles are injected into diseased tissue and subjected to an alternating high frequency magnetic field. The process triggers sufficient heat to destroy the cancerous cells. One of the challenging problems during MFH is blood flow in tissue. In real conditions the heat which is transferred by blood flow should be considered in the analysis of MFH.

METHODS

In this study, heat transfer was investigated in an agar gel phantom containing fluid flow. Fe3O4 as a nano-fluid was injected into the centre of a gel cylinder which was filled with another gel cylinder and subjected to an alternating magnetic field of 7.3 kA/m and a frequency of 50 kHz for 3600 s. The temperature was measured at three points in the gel. Temperature distributions regarding the time at these three points were experimentally measured. Moreover, the specific absorption rate (SAR) function was calculated with a temperature function.

RESULTS

The SAR function was a key asset in the hyperthermia and was obtained on the condition that the fluid flowed through the gel. Finally, a finite element analysis (FEA) was performed to verify the SAR function. The results revealed that there was good agreement between the measured temperature and the one obtained from FEA. In addition, the effects of fluid flow and accuracy of function obtained for heat production in the gel were presented.

CONCLUSION

It is believed that the proposed model has the potential ability to get close to reality in this type of investigation. The proposed function has implications for use in further modelling studies as a heat generation source.