Ultrathin Single-Crystalline Boron Nanosheets for Enhanced Electro-Optical Performances

Advances In Borophene: Synthesis, Tunable Properties, and Energy Storage Applications

Monolayer boron nanosheet, commonly known as borophene, has garnered significant attention in recent years due to its unique structural, electronic, mechanical, and thermal properties. This review paper provides a comprehensive overview of the advancements in the synthetic strategies, tunable properties, and prospective applications of borophene, specifically focusing on its potential in energy storage devices. The review begins by discussing the various synthesis techniques for borophene, including molecular beam epitaxy (MBE), chemical vapor deposition (CVD), and chemical methods, such as ultrasonic exfoliation and thermal decomposition of boron-containing precursors. The tunable properties of borophene, including its electronic, mechanical, and thermal characteristics, are extensively reviewed, with discussions on its bandgap engineering, plasmonic behavior, and thermal conductivity. Moreover, the potential applications of borophene in energy storage devices, particularly as anode materials in metal-ion batteries and supercapacitors, along with its prospects in other energy storage systems, such as sodium-oxygen batteries, are succinctly, discussed. Hence, this review provides valuable insights into the synthesis, properties, and applications of borophene, offering much-desired guidance for further research and development in this promising area of nanomaterials science.

Hummers' method-assisted liquid-phase exfoliation enables the fabrication of few-layer borophene from bulk boron

The fabrication of few-layer borophene (BP) from bulk boron (b-B) is of great importance and still a scientific challenge due to the complex structure and crystallinity of b-B. Herein, we propose a novel technique to prepare a few-layer BP on a large scale with a large lateral size in a well-controlled manner. For this, we employed the Hummers' method-assisted liquid-phase exfoliation. In the first step, the chemical exfoliation of the b-B as a precursor was performed by the modified Hummers' method. After chemical exfoliation, mechanical delamination was employed by using an immersion sonicator. Finally, BP sheets were collected with dimensions ranging from several hundred nanometers to a few micrometers and an average thickness of 4.2 nm. We envision that the proposed low-cost, flexible, and large-scale production method will provide unique advantages for the application of few-layer BP in the realization of high-performance electronics, optoelectronics, flexible devices, sensing systems, energy conversion, and storage devices.

Effect of modulation by adsorption and doping on the quantum capacitance of borophene

Electric double-layer supercapacitors (EDLCs) have attracted much attention in the energy storage field due to their advantages such as high output power, long service life, safety and high efficiency. However, their low energy density limits their application. Aiming at the problem of the low energy density of EDLCs, improving quantum capacitance (CQ) of electrode materials is an effective strategy. In this paper, we systematically studied the effects of vacancy, doping, and metal atom adsorption on the CQ of borophene using first-principles calculations. The results show that S and N doping greatly enhance the charge accumulation of borophene at positive and negative potential, respectively. The maximum CQ values of S-doped and N-doped borophene are 157.3 μF cm-2 (0.38 V) and 187.8 μF cm-2 (-0.24 V), respectively. Both of them can serve as ideal candidates for the positive (S-doped one) and negative (N-doped one) electrodes of EDLCs. Besides, metal Al atom-adsorbed borophene can also effectively enhance the CQ, with a maximum value of 109.1 μF cm-2.

Facile Synthesis of Oxidized Boron Nanosheets for Chemo- and Biosensing

As recently emerging nanomaterials, boron nanosheets (BNSs) have attracted more and more attention in various fields such as supercapacitors, photodetectors, bioimaging, and electrocatalysis due to their advantages of good biological compatibility, environmental friendliness, and good electro-optical properties. However, the study and application of BNSs in chemical and biological sensing are still in the infant stage, mainly due to the requirement of complicated, high-cost, and time-consuming preparation strategies. In this work, a new class of BNSs, namely oxidized-BNSs (i.e., ox-BNSs), were easily and rapidly synthesized by chemically treating boron powder with diluted HNO₃ in a very short time (less than 15 min). The composition, morphology, optical property, and peroxidase mimetic activity of obtained ox-BNSs were investigated in detail. The prepared ox-BNSs were several-layered nanosheets with abundant oxygen-containing groups, emitted blue fluorescence, and possessed good intrinsic peroxidase mimetic activity, based on which a sensitive and selective colorimetric sensor was developed for detection of H₂O₂ and glucose. The new easy preparation strategy and good sensing performances of the prepared ox-BNSs would greatly stimulate the study and application of BNSs in chemo- and biosensing.

Freestandingα-rhombohedral borophene nanosheets: preparation and memory device application

Borophene has attracted extensive interests owing to its distinct structural, electronic and optical properties for promising potential applications. However, the structural instability and need of metal substrate for deposition of borophene seriously restrict the exploration of its exceptional physical and chemical properties and further hamper its extensive applications towards high-performance electronic and optoelectronic devices. Here, we reported the synthesis of high-quality freestandingα-rhombohedral borophene nanosheets by a facile probe ultrasonic approach in different organic solvents. The results show that the nanosheets have high-quality in ethanol solution and have an average lateral size of 0.54μm and a thickness of around 1.2 nm. Photoluminescence spectra indicate that a strong quantum confinement effect occurs in the nanosheets, which caused the increase of the band gap from 1.80 eV for boron powders and 2.52 eV for the nanosheets s. A nonvolatile memory device based on the nanosheets mixed with polyvinylpyrrolidone was fabricated, which exhibited a good rewriteable nonvolatile memory behavior and good stability.

Monoelemental two-dimensional boron nanomaterials beyond theoretical simulations: From experimental preparation, functionalized modification to practical applications

During the past decade, there is an explosive growth of theoretical and computational studies on 2D boron-based nanomaterials. In terms of extensive predictions from theoretical simulations, borophene, boron nanosheets and 2D boron derivatives show excellent structural, electronic, photonic and nonlinear optical characteristics, and potential applications in a wide range of fields. In recent years, previous studies have reported the successful experimental preparations, superior properties, multi-functionalized modifications of various 2D boron and its derivatives, which show many practical applications in significant fields. To further promote the ever-increasing experimental studies, this present review systematically summarizes recent progress on experimental preparation methods, functionalized modification strategies and practical applications of 2D boron-based nanomaterials and multifunctional derivatives. Firstly, this review summarizes the experimental preparation methods, including molecular beam epitaxy, chemical vapor deposition, liquid-phase exfoliation, chemical reaction, and other auxiliary methods. Then, various strategies for functionalized modification are introduced overall, focusing on borophene derivatives, boron-based nanosheets, atom-introduced, chemically-functionalized borophene and boron nanosheets, borophene or boron nanosheet-based heterostructures, and other functionalized 2D boron nanomaterials. Subsequently, various potential applications are discussed in detail, involving energy storage, catalysis conversion, photonics, optoelectronics, sensors, bio-imaging, biomedicine therapy, and adsorption. We comment the state-of-the-art related studies concisely, and also discuss the current status, probable challenges and perspectives rationally. This review is timely, comprehensive, in-depth and highly attractive for scientists from multiple disciplines and scientific fields, and can facilitate further development of advanced functional low-dimensional nanomaterials and multi-functionalized systems toward high-performance practical applications in significant fields.

Ultra-Hard (41 GPa) Isotopic Pure 10BP Semiconductor Microwires for Flexible Photodetection and Pressure Sensing

An urgent demand for electronic and optoelectronic devices able to work in extreme environments promotes a series of research studies on semiconductor materials. Cubic boron phosphide (BP) as a semiconductor material with excellent characteristics shows great application potential. However, since the synthesis conditions required are difficult to achieve and the growth mechanism of BP is still unclear, there are few reports on the basic properties of BP and pure isotope BP, resulting in a narrow understanding of their special physical properties. Here, we successfully obtained highly pure isotopic ¹⁰BP crystals by a vapor-liquid-solid (VLS) method unconventionally designed, which successfully overcomes the thermodynamic conflict between the high melting point of the boron element and low sublimation temperature of the phosphorus element. The ¹⁰BP achieved owns an aspect ratio as high as 10⁴ and a hardness up to 41 GPa. Besides, as an indirect bandgap semiconductor, it has ultrawide red emission spectra, a p-type conductivity with extremely low resistivity, and excellent photoelectronic and piezoelectric characteristics. Furthermore, compared with other superhard semiconductors like cubic BN and diamond, ¹⁰BP has an obvious advantage of lower growth temperature (1200 °C). All these characteristics confirm the prospects owned by ¹⁰BP in its applications to the field of high-conductivity, optoelectronic, strain-sensing, and superhard semiconductors.

Few-layer Mg-deficient borophene nanosheets: I2 oxidation and ultrasonic delamination from MgB2

By using I₂ as an oxidant and CH₃CN as a reaction medium, few-layer Mg-deficient borophene nanosheets (FBN) with a stoichiometric ratio of Mg_0.22B₂ are prepared by oxidizing MgB₂ in a mixture of CH₃CN and HCl for 14 days under nitrogen protection and followed by ultrasonic delaminating in CH₃CN for 2 h. The prepared FBN possess a two-dimensional flake morphology, and they show a clear interference fringe with a d-spacing of 0.251 nm corresponding to the (208) plane of rhombohedral boron. While maintaining the hexagonal boron networks of MgB₂, the FBN have an average thickness of about 4.14 nm (four monolayer borophene) and a lateral dimension of 500 nm, and the maximum Mg deintercalation rate can reach 78%. The acidity of the reaction system plays an important role; the HCl reaction system not only facilitates the oxidation of MgB₂ by I₂, but also increases the deintercalation ratio of Mg atoms. Etching of the Mg atom layer with HCl, the negative charge decrease of the boron layer by I₂ oxidation, and the Mg chelating effect from CH₃COOH due to the hydrolysis of CH₃CN in an HCl environment led to a high deintercalation rate of the Mg atom. Density functional theory (DFT) calculations further support the result that the maximum deintercalation rate of Mg atoms is about 78% while maintaining the hexagonal layer structure of boron. This research solves the problems of low Mg atom deintercalation rate and hexagonal boron structure destruction when using the precursor MgB₂ to produce borophene nanosheets, which is of great significance for large-scale novel preparation and application of borophene nanosheets.

Synthesis and solar blind photosensitivity of crystalline boron nanowires

Herein, single crystalline boron nanowires (BNWs) have been synthesized by chemical vapor transport using boron element as boron source, iodine as transport agent, and Au as catalyst. The results demonstrate that BNWs can be all formed at 600 °C-950 °C for 2 h, and possess rhombohedral crystal structure (β-boron). The NWs have diameters from several to hundreds of nanometers, and lengths from several to hundreds of microns. A single nanowire has been fabricated to field effect transistor (FET) which shows excellent solar blind photosensitivity and selectivity. The photo/dark current ratio and photoresponsitity is 1.14 and 97.6 mA W^-1at a bias of 5 V under light illumination of 254 nm with 0.42 mW cm^-2, respectively, and both the rising and decay time of the on-off currents are 4.6 s and 10.3 s, respectively. When the FET is used as a personal breath sensor, the ratio of exsufflating and inhaling currents is 2.7, rising and decay time of the breath currents are 0.4 s and 2.2 s, respectively. So the BNWs are important sense materials.

Borophene as an emerging 2D flatland for biomedical applications: current challenges and future prospects

Recently, two-dimensional (2D)-borophene has emerged as a remarkable translational nanomaterial substituting its predecessors in the field of biomedical sensors, diagnostic tools, high-performance healthcare devices, super-capacitors, and energy storage devices. Borophene justifies its demand due to high-performance and controlled optical, electrical, mechanical, thermal, and magnetic properties as compared with other 2D-nanomaterials. However, continuous efforts are being made to translate theoretical and experimental knowledge into pragmatic platforms. To cover the associated knowledge gap, this review explores the computational and experimental chemistry needed to optimize borophene with desired properties. High electrical conductivity due to destabilization of the highest occupied molecular orbital (HOMO), nano-engineering at the monolayer level, chemistry-oriented biocompatibility, and photo-induced features project borophene for biosensing, bioimaging, cancer treatment, and theragnostic applications. Besides, the polymorphs of borophene have been useful to develop specific bonding for DNA sequencing and high-performance medical equipment. In this review, an overall critical and careful discussion of systematic advancements in borophene-based futuristic biomedical applications including artificial intelligence (AI), Internet-of-Things (IoT), and Internet-of-Medical Things (IoMT) assisted smart devices in healthcare to develop high-performance biomedical systems along with challenges and prospects is extensively addressed. Consequently, this review will serve as a key supportive platform as it explores borophene for next-generation biomedical applications. Finally, we have proposed the potential use of borophene in healthcare management strategies.

Planar Networks of Boron Triangles: Analogies to Benzene and Other Planar Aromatic Hydrocarbons

The lowest energy structures for B_n species (n = 6 to 23 except for 20) observed experimentally in the gas phase with a mass spectrometer are planar networks of boron triangles. Such networks are considered to consist of trigonal planar sp²-hybridized boron atoms having perpendicular p orbitals similar to the carbon atoms in benzene and other planar aromatic hydrocarbons. Electron bookkeeping for reasonable chemical bonding topologies of wheel-like structures such as B@B_n-1 (n = 6-9) leads to two π-electrons for B₆ and B₇⁺ similar to the cyclopropenyl cation and six π-electrons for B₈^2- and B₉^- similar to benzene. Related chemical bonding topology analyses for low-energy oval B₁₀ and B₁₁^- structures as well as for larger planar boron triangle networks with 12, 13, and 14 boron atoms suggest six π-electrons in such structures. Planar networks of boron triangles having 16-19 boron atoms are shown to be systems with 10 π-electrons similar to naphthalene. Similarly, low-energy planar B₂₂ and B₂₃^- structures are shown to be 4 π-electron systems 1analogous to linear anthracene and angular phenanthrene, respectively. Intermediate B₁₅^- and B₂₁^- systems are shown to be systems with 4k rather than 4k + 2 π-electrons with 8 and 12 π-electrons, respectively. Structures based on planar networks of boron triangles are strongly energetically disfavored for B₂₀ relative to a nonplanar decagonal antiprism structure with ideal D_10d symmetry.

Borophene: Two-dimensional Boron Monolayer: Synthesis, Properties, and Potential Applications

Borophene, a monolayer of boron, has risen as a new exciting two-dimensional (2D) material having extraordinary properties, including anisotropic metallic behavior and flexible (orientation-dependent) mechanical and optical properties. This review summarizes the current progress in the synthesis of borophene on various metal substrates, including Ag(110), Ag(100), Au(111), Ir(111), Al(111), and Cu(111), as well as heterostructuring of borophene. In addition, it discusses the mechanical, thermal, magnetic, electronic, optical, and superconducting properties of borophene and the effects of elemental doping, defects, and applied mechanical strains on these properties. Furthermore, the promising potential applications of borophene for gas sensing, energy storage and conversion, gas capture and storage applications, and possible tuning of the material performance in these applications through doping, formation of defects, and heterostructures are illustrated based on available theoretical studies. Finally, research and application challenges and the outlook of the whole borophene's field are given.

Boron Nanosheet-Supported Rh Catalysts for Hydrogen Evolution: A New Territory for the Strong Metal-Support Interaction Effect

High-efficiency electrochemical hydrogen evolution reaction (HER) offers a promising strategy to address energy and environmental crisis. Platinum is the most effective electrocatalyst for the HER. However, challenging scarcity, valuableness, and poor electrochemical stability still hinder its wide application. Here, we designed an outstanding HER electrocatalyst, highly dispersed rhodium (Rh) nanoparticles with an average diameter of only 3 nm supported on boron (B) nanosheets. The HER catalytic activity is even comparable to that of commercial platinum catalysts, with an overpotential of only 66 mV in 0.5 M H₂SO₄ and 101 mV in 1 M KOH to reach the current density of 10 mA cm^-2. Meanwhile, the catalyst exhibited impressive electrochemical durability during long-term electrochemical processes in acidic and alkaline media, even the simulated seawater environment. Theoretical calculations unraveled that the structure-activity relationship between B(104) crystal plane and Rh(111) crystal plane is beneficial to the release of hydrogen, and surface O plays a vital role in the catalysis process. Our work may gain insights into the development of supported metal catalysts with robust catalytic performance through precise engineering of the strong metal-supported interaction effect.

Low-Temperature Induced Enhancement of Photoelectric Performance in Semiconducting Nanomaterials

The development of light-electricity conversion in nanomaterials has drawn intensive attention to the topic of achieving high efficiency and environmentally adaptive photoelectric technologies. Besides traditional improving methods, we noted that low-temperature cooling possesses advantages in applicability, stability and nondamaging characteristics. Because of the temperature-related physical properties of nanoscale materials, the working mechanism of cooling originates from intrinsic characteristics, such as crystal structure, carrier motion and carrier or trap density. Here, emerging advances in cooling-enhanced photoelectric performance are reviewed, including aspects of materials, performance and mechanisms. Finally, potential applications and existing issues are also summarized. These investigations on low-temperature cooling unveil it as an innovative strategy to further realize improvement to photoelectric conversion without damaging intrinsic components and foresee high-performance applications in extreme conditions.

Bandgap Engineering of Hydroxy-Functionalized Borophene for Superior Photo-Electrochemical Performance

Two-dimensional (2D) semiconducting boron nanosheets (few-layer borophene) have been theoretically predicted, but their band gap tunability has not been experimentally confirmed. In this study, hydroxy-functionalized borophene (borophene-OH) with tunable band gap was fabricated by liquid-phase exfoliation using 2-butanol solvent. Surface-energy matching between boron and 2-butanol produced smooth borophene, and the exposed unsaturated B sites generated by B-B bond breaking during exfoliation coordinated with OH groups to form semiconducting borophene-OH, enabling a tunable band gap of 0.65-2.10 eV by varying its thickness. Photoelectrochemical (PEC) measurements demonstrated that the use of borophene-OH to fabricate working electrodes for PEC-type photodetectors significantly enhanced the photocurrent density (5.0 μA cm^-2 ) and photoresponsivity (58.5 μA W^-1 ) compared with other 2D monoelemental materials. Thus, borophene-OH is a promising semiconductor with great optoelectronic potential.

Antimonene nanosheets with enhanced electrochemical performance for energy storage applications

Antimonene is an exfoliated 2D nanomaterial obtained from bulk antimony. It is a novel class of 2D material for energy storage applications. In the present work, antimonene was synthesized using a high-energy ball milling-sonochemical method. The structural, morphological, thermal, and electrochemical properties of antimonene were comparatively analyzed against bulk antimony. X-ray diffractometry (XRD) analysis confirms the crystal structure and 2D structure of antimonene, as a peak shift was observed. The Raman spectra show the peak shift for the E_g and A_1g modes of vibration of antimony, which confirms the formation of antimonene. Scanning electron microscopy (SEM) and high-resolution transmission electron microscopy (HRTEM) images depict the exfoliation of antimonene from bulk antimony. Thermal analysis unveiled the thermal stability of antimonene up to 400 °C with only 3% weight loss. X-ray photoelectron spectroscopy (XPS) analysis reveals the formation of antimonene, which is free from contamination. The electrochemical properties of antimony and antimonene were investigated using cyclic voltammetry (CV) and chronopotentiometric (CP) analysis, using 2 M KOH as an electrolyte. Antimonene exhibited a relatively high specific capacitance of 597 F g^-1 compared to ball-milled antimony (101 F g^-1) at a scan rate of 10 mV s^-1. Moreover, electrochemical impedance spectroscopy (EIS) analysis revealed that antimonene has a relatively low equivalence series resistance (RESR) and low charge transfer resistance (RCT) compared to bulk antimony, which favors high electrochemical performance. The cyclic stability of antimonene was studied for 3000 cycles, and the results show high cyclic stability. The electrochemical results demonstrated that antimonene is a promising material for energy storage applications.

Preparation and UV Photoelectric Properties of Aligned ZnO-TiO2 and TiO2-ZnO Core-Shell Structured Heterojunction Nanotubes

Large-area horizontal-aligned ZnO nanotubes (ZNTs), TiO₂ nanotubes (TNTs), TiO₂-ZnO core-shell nanotubes (TZNTs) and ZnO-TiO₂ core-shell nanotubes (ZTNTs) were successfully synthesized by electrospinning combined with pulsed-laser deposition. The morphology, structure, and composition of the samples were characterized by scanning electron microscopy, high-resolution transmission electron microscopy, and Raman spectroscopy. The photoluminescence (PL) spectra of these samples indicate that the addition of a TiO₂ layer greatly decreases the recombination of photogenerated carriers in the heterojunction nanotubes. The photodetectors (PDs) were fabricated by assembling horizontally ordered nanotubes on the gold interdigital electrode, and their ultraviolet (UV) detection performances were compared. The test results at room temperature show that the PD with aligned ZTNTs have the best UV response and a short response recovery time. In addition, the performance of ZTNT PDs and TZNT PDs are further improved under heating. The photo/dark current ratio, responsivity (R_λ), detectivity (D*), and external quantum efficiency (EQE) of ZTNTs increased to 388, 450 uA·W^-1, 1.1 × 10¹⁰ cm·Hz^1/2·W^-1, and 0.15%, respectively, under the condition of 365 nm UV radiation with a power density of 4.9 mW·cm^-2 and a 1 V bias at 90 °C. The UV response mechanism and structural superiority of the horizontally ordered coaxial heteronanotube were also discussed. In addition, this work provides an important method for the design of other ordered nanomaterials and structures, which have a wide range of applications in the fields of sensors, transistors, transparent flexible electrodes, and other multifunctional devices.

Few-layer and large flake size borophene: preparation with solvothermal-assisted liquid phase exfoliation

The preparation of two-dimensional boron (B) nanosheets, especially for borophene, is still a challenge because of its unique structure and complex B-B bonds in bulk boron. In the present work, a novel preparation technology for borophene with only a few layers and large flake sizes is developed by a solvothermal-assisted liquid phase exfoliation process, consisting of ball milling-thinning, solvothermal swelling, and probe ultrasonic delamination. The exfoliation effect of the bulk B precursors is related to the surface tension and Hildebrand parameter of the selected solvents such as acetone, N,N-dimethyl formamide (DMF), acetonitrile, ethanol, and N-methyl pyrrolidone (NMP), and a relative small surface tension when using solvents is favorable for the exfoliation of bulk B. Four-layer thick borophene and an average lateral size of 5.05 μm can be obtained in acetone as the exfoliating solvent. The surface composition of the exfoliated few-layer borophene with large flake size hardly changes, while the chemical state of B changes to some extent because they are partly oxidized on the surface by contaminates before and after exfoliation. This acetone solvothermal-assisted liquid phase exfoliation technique can be used to prepare high quality borophene with large horizontal sizes, and it will provide the basis to study few-layer borophene with large sizes further.

Liquid phase exfoliated boron nanosheets for all-optical modulation and logic gates

Boron nanosheets possess unique photoelectric properties, including photosensitivity, photoresponse, and optical nonlinearity. In this article, we show the interaction between light and boron nanosheets in which concentric rings formed in the far field, which attributed to the strong Kerr nonlinearity of boron nanosheets. Furthermore, the distortion, regulation and relationship between the Kerr nonlinearity and effective mass or carrier mobility of the diffraction rings of boron nanosheets have been investigated. Our work shows that the spatial self-phase modulation effect of boron nanosheets is indeed caused by nonlocal electronic coherence. In addition, we have implemented all-light modulation and all-light logic gates based on the prepared boron nanosheets. We believe that our results will provide a powerful demonstration of nonlinear photonic devices based on boron nanosheets and a reference for photonic devices based on two-dimensional materials.

Recent Advances and Challenges in 2D Metal-Free Electrocatalysts for N2 Fixation

The ever-growing requirement of ammonia for industry and energy supply motivates people to find clean and cost-effective alternatives to overcome the shortcomings of the century-old Haber-Bosch process. Electrocatalytic N₂ reduction (NRR) is considered a prospective way for ammonia production at ambient conditions. Recently, two-dimensional (2D) metal-free materials are emerging as highly efficient and robust electrocatalysts for NRR owing to their advanced features: highly exposed surface, abundant active sites, tunable electronic states, and long-term stability compared to metal-based and bulk catalysts. In this minireview, we briefly summarize the latest edge reports on 2D metal-free materials catalyzed NRR. Also, we discuss the challenges and perspectives on the design and synthesis of novel 2D metal-free catalysts.

Void-free 3D Bioprinting for In-situ Endothelialization and Microfluidic Perfusion

Two major challenges of 3D bioprinting are the retention of structural fidelity and efficient endothelialization for tissue vascularization. We address both of these issues by introducing a versatile 3D bioprinting strategy, in which a templating bioink is deposited layer-by-layer alongside a matrix bioink to establish void-free multimaterial structures. After crosslinking the matrix phase, the templating phase is sacrificed to create a well-defined 3D network of interconnected tubular channels. This void-free 3D printing (VF-3DP) approach circumvents the traditional concerns of structural collapse, deformation and oxygen inhibition, moreover, it can be readily used to print materials that are widely considered "unprintable". By pre-loading endothelial cells into the templating bioink, the inner surface of the channels can be efficiently cellularized with a confluent endothelial layer. This in-situ endothelialization method can be used to produce endothelium with a far greater uniformity than can be achieved using the conventional post-seeding approach. This VF-3DP approach can also be extended beyond tissue fabrication and towards customized hydrogel-based microfluidics and self-supported perfusable hydrogel constructs.

A self-powered photodetector based on two-dimensional boron nanosheets

Owing to their intriguing characteristics, the ongoing pursuit of emerging mono-elemental two-dimensional (2D) nanosheets beyond graphene is an exciting research area for next-generation applications. Herein, we demonstrate that highly crystalline 2D boron (B) nanosheets can be efficiently synthesized by employing a modified liquid phase exfoliation method. Moreover, carrier dynamics has been systematically investigated by using femtosecond time-resolved transient absorption spectroscopy, demonstrating an ultrafast recovery speed during carrier transfer. Based on these results, the optoelectronic performance of the as-synthesized 2D B nanosheets has been investigated by applying them in photoelectrochemical (PEC)-type and field effect transistor (FET)-type photodetectors. The experimental results revealed that the as-fabricated PEC device not only exhibited a favourable self-powered capability, but also a high photoresponsivity of 2.9-91.7 μA W-1 in the UV region. Besides, the FET device also exhibited a tunable photoresponsivity in the range of 174-281.3 μA W-1 under the irradiation of excited light at 405 nm. We strongly believe that the current work shall pave the path for successful utilization of 2D B nanosheets in electronic and optoelectronic devices. Moreover, the proposed method can be utilized to explore other mono-elemental 2D nanomaterials.

Coordination assembly of 2D ordered organic metal chalcogenides with widely tunable electronic band gaps

Engineering the band gap chemically by organic molecules is a powerful tool with which to optimize the properties of inorganic 2D materials. The obtained materials are however still limited by inhomogeneous compositions and properties at nanoscale and small adjustable band gap ranges. To overcome these problems in the traditional exfoliation and then organic modification strategy, an organic modification and then exfoliation strategy was explored in this work for preparing 2D organic metal chalcogenides (OMCs). Unlike the reported organically modified 2D materials, the inorganic layers of OMCs are fully covered by long-range ordered organic functional groups. By changing the electron-donating ability of the organic functional groups and the electronegativity of the metals, the band gaps of OMCs were varied by 0.83 eV and their conductivities were modulated by 9 orders of magnitude, which are 2 and 107 times higher than the highest values observed in the reported chemical methods, respectively.

Boron-Doped Nanocrystalline Diamond-Carbon Nanospike Hybrid Electron Emission Source

Electron emission signifies an important mechanism facilitating the enlargement of devices that have modernized large parts of science and technology. Today, the search for innovative electron emission devices for imaging, sensing, electronics, and high-energy physics continues. Integrating two materials with dissimilar electronic properties into a hybrid material is an extremely sought-after synergistic approach, envisioning a superior field electron emission (FEE) material. An innovation is described regarding the fabrication of a nanostructured carbon hybrid, resulting from the one-step growth of boron-doped nanocrystalline diamond (BNCD) and carbon nanospikes (CNSs) by a microwave plasma-enhanced chemical vapor deposition technique. Spectroscopic and microscopic tools are used to investigate the morphological, bonding, and microstructural characteristics related to the growth mechanism of these hybrids. Utilizing the benefits of both the sharp edges of the CNSs and the high stability of BNCD, promising FEE performance with a lower turn-on field of 1.3 V/μm, a higher field enhancement factor of 6780, and a stable FEE current stability lasting for 780 min is obtained. The microplasma devices utilizing these hybrids as a cathode illustrate a superior plasma illumination behavior. Such hybrid carbon nanostructures, with superb electron emission characteristics, can encourage the enlargement of several electron emission device technologies.

Flat Boron: A New Cousin of Graphene

The mechanical exfoliation of graphene from graphite provides the cornerstone for the synthesis of other 2D materials with layered bulk structures, such as hexagonal boron nitride, transition metal dichalcogenides, black phosphorus, and so on. However, the experimental production of 2D flat boron is challenging because bulk boron has very complex spatial structures and a rich variety of chemical properties. Therefore, the realization of 2D flat boron marks a milestone for the synthesis of 2D materials without layered bulk structures. The historical efforts in this field, particularly the most recent experimental progress, such as the growth of 2D flat boron on a metal substrate by chemical vapor deposition and molecular beam epitaxy, or liquid exfoliation from bulk boron, are described.

Construction of 2D Antimony(III) Selenide Nanosheets for Highly Efficient Photonic Cancer Theranostics

Photonic cancer hyperthermia has been considered to be one of the most representative noninvasive cancer treatments with high therapeutic efficiency and biosafety. However, it still remains a crucial challenge to develop efficient photothermal nanoagents with satisfactory photothermal performance and biocompatibility, among which two-dimensional (2D) ultrathin nanosheets have recently been regarded as the promising multifunctional theranostic agents for photothermal tumor ablation. In this work, we report, for the first time, on the construction of a novel kind of photothermal agents based on the intriguing 2D antimony(III) selenide (Sb₂Se₃) nanosheets for highly efficient photoacoustic imaging-guided photonic cancer hyperthermia by near-infrared (NIR) laser activation. These Sb₂Se₃ nanosheets were easily fabricated by a novel but efficiently combined liquid nitrogen pretreatment and freezing-thawing approach, which were featured with high photothermal-conversion capability (extinction coefficient: 33.2 L g^-1 cm^-1; photothermal-conversion efficiency: 30.78%). The further surface engineering of these Sb₂Se₃ ultrathin nanosheets with poly(vinyl pyrrolidone) (PVP) substantially improved the biocompatibility of the nanosheets and their stability in physiological environments, guaranteeing the feasibility in photonic antitumor applications. Importantly, 2D Sb₂Se₃-PVP nanosheets have been certificated to efficiently eradicate the tumors by NIR-triggered photonic tumor hyperthermia. Especially, the biosafety in vitro and in vivo of these Sb₂Se₃ ultrathin nanosheets has been evaluated and demonstrated. This work meaningfully expands the biomedical applications of 2D bionanoplatforms with a planar topology through probing into new members (Sb₂Se₃ in this work) of 2D biomaterials with unique intrinsic physiochemical property and biological effect.

High-yield production of few-layer boron nanosheets for efficient electrocatalytic N2 reduction

We report ambient electrochemical N2 fixation at low overpotentials by using two-dimensional (2D) β-boron. The metal-free catalyst afforded both an excellent NH3 yield rate and faradaic efficiency, approximately two times higher than those of bulk boron. We found that several binding sites, especially those involving icosahedral boron in the 2D material, can indeed catalyze N2 reduction efficiently with strong N2 adsorption, thus benefiting initial activation.

Electronic Structure of Boron Flat Holeless Sheet

The electronic band structure, namely energy band surfaces and densities-of-states (DoS), of a hypothetical flat and ideally perfect, i.e., without any type of holes, boron sheet with a triangular network is calculated within a quasi-classical approach. It is shown to have metallic properties as is expected for most of the possible structural modifications of boron sheets. The Fermi curve of the boron flat sheet is found to be consisted of 6 parts of 3 closed curves, which can be approximated by ellipses representing the quadric energy-dispersion of the conduction electrons. The effective mass of electrons at the Fermi level in a boron flat sheet is found to be too small compared with the free electron mass m 0 and to be highly anisotropic. Its values distinctly differ in directions Γ–K and Γ–M: m Γ – K / m 0 ≈ 0.480 and m Γ – M / m 0 ≈ 0.052 , respectively. The low effective mass of conduction electrons, m σ / m 0 ≈ 0.094 , indicates their high mobility and, hence, high conductivity of the boron sheet. The effects of buckling/puckering and the presence of hexagonal or other type of holes expected in real boron sheets can be considered as perturbations of the obtained electronic structure and theoretically taken into account as effects of higher order.

Photoelectric Detectors Based on Inorganic p-Type Semiconductor Materials

Photoelectric detectors are the central part of modern photodetection systems with numerous commercial and scientific applications. p-Type semiconductor materials play important roles in optoelectronic devices. Photodetectors based on p-type semiconductor materials have attracted a great deal of attention in recent years because of their unique properties. Here, a comprehensive summary of the recent progress mainly on photodetectors based on inorganic p-type semiconductor materials is presented. Various structures, including photoconductors, phototransistors, homojunctions, heterojunctions, p-i-n junctions, and metal-semiconductor junctions of photodetectors based on inorganic p-type semiconductor materials, are discussed and summarized. Perspectives and an outlook, highlighting the promising future directions of this research field, are also given.

Enhanced field-emission properties of buckled α-borophene by means of Li decoration: a first-principles investigation

In this study, the structures and field-emission properties of Li-decorated buckled α-borophene (BBP) were investigated by first-principles density functional theory at the PW91 level. Using the computed binding energies, Hirshfeld- and electrostatic potential-derived charges, induced dipole moments, densities of states, and ionization potentials, we evaluated the influence of an applied electric field on the structural stability, work function, and field-emission current of the Li-decorated BBP nanostructures. Furthermore, we also explored the quantitative dependence of the emission current on the electric field, Li concentration, and molecular orbitals. The computed results indicated that increasing the electric field and Li concentration has a considerably positive effect on the field-emission performance of the Li-decorated BBPs. Besides advantages including small work functions and low ionization potentials, most remarkably, the field-emission current can be as high as 48.81 μA in Li4/BBP (supercell with 36 atoms only) under a rather small applied electric field of 0.05 V Å-1, which rivals the highest value of the graphene-BN nanocomposite among all the theoretical nanostructures presented to date. Our results highly support the fact that Li-decorated BBPs can be appealing field-emission cathode materials with an extremely high emission current.

Two-dimensional boron: structures, properties and applications

Situated between metals and non-metals in the periodic table, boron is one of the most chemically versatile elements, forming at least sixteen bulk polymorphs composed of interlinked boron polyhedra. In low-dimensionality, boron chemistry remains or becomes even more intriguing since boron clusters with several to tens of atoms favor planar or cage-like structures, which are similar to their carbon counterparts in terms of conformation and electronic structure. The similarity between boron and carbon has raised a question of whether there exists stable two-dimensional (2D) boron, as a conceptual precursor, from which other boron nanostructures may be built. Here, we review the current theoretical and experimental progress in realizing boron atomic layers. Starting by describing a decade-long effort towards understanding the size-dependent structures of boron clusters, we present how theory plays a role in extrapolating boron clusters into 2D form, from a freestanding state to that on substrates, as well as in exploring practical routes for their synthesis that recently culminated in experimental realization. While 2D boron has been revealed to have unusual mechanical, electronic and chemical properties, materializing its potential in practical applications remains largely impeded by lack of routes towards transfer from substrates and controlled synthesis of quality samples.

Scalable Production of Few-Layer Boron Sheets by Liquid-Phase Exfoliation and Their Superior Supercapacitive Performance

Although two-dimensional boron (B) has attracted much attention in electronics and optoelectronics due to its unique physical and chemical properties, in-depth investigations and applications have been limited by the current synthesis techniques. Herein, we demonstrate that high-quality few-layer B sheets can be prepared in large quantities by sonication-assisted liquid-phase exfoliation. By simply varying the exfoliating solvent types and centrifugation speeds, the lateral size and thickness of the exfoliated B sheets can be controllably tuned. Additionally, the exfoliated few-layer B sheets exhibit excellent stability and outstanding dispersion in organic solvents without aggregates for more than 50 days under ambient conditions, owing to the presence of a solvent residue shell on the B sheet surface that provides excellent protection against air oxidation. Moreover, we also demonstrate the use of the exfoliated few-layer B sheets for high-performance supercapacitor electrode materials. This as-prepared device exhibits impressive electrochemical performance with a wide potential window of up to 3.0 V, excellent energy density as high as 46.1 Wh/kg at a power density of 478.5 W/kg, and excellent cycling stability with 88.7% retention of the initial specific capacitance after 6000 cycles. This current work not only demonstrates an effective strategy for the synthesis of the few-layer B sheets in a controlled manner but also makes the resulting materials promising for next-generation optoelectronics and energy storage applications.

Two dimensional boron nanosheets: synthesis, properties and applications

As a material generating increasing interest, boron nanosheets have been reviewed from the perspective of their synthesis, properties, application and possible research directions.

Hydrogen storage in Li, Na and Ca decorated and defective borophene: a first principles study

Recently synthesized two-dimensional (2D) borophene possesses unique structural, mechanical, electrical and optical properties. Herein, we present a comprehensive study of H₂ storage in alkali metal decorated and defect containing 2D borophene using density functional theory calculations. While the adsorption of H₂ over pristine borophene was found to be weak with a binding energy of −0.045 eV per H₂, metal decoration and point defects enhanced the adsorption strength significantly. Interestingly, the magnitudes of binding energy for a single H₂ molecule over Li, Na and Ca decorated borophene were found to increase up to −0.36, −0.34, and −0.12 eV per H₂, respectively. On the other hand, while the binding energy of one H₂ molecule over the borophene substrate containing a single vacancy (SV) was only −0.063 eV per H₂, similar to that of phosphorene, the binding energy increased to an enormous −0.69 eV per H₂ over borophene containing a double vacancy (DV). To gain further insight into the H₂ adsorption process and identify sources of charge transfer, differential charge densities and projected density of states were calculated. Significant charge accumulation and depletion caused strong polarization of the H₂ molecules. Finally, Na, Li and Ca decorated borophene yielded the gravimetric densities 9.0%, 6.8%, and 7.6%, respectively. The gravimetric density of the borophene containing a DV was found to be the highest, a staggering 9.2%, owing to increased interactions between DV borophene and the H₂ molecules. These results suggest that borophene can be an effective substrate for H₂ storage by carefully engineering it with metal decoration and point defects.

Herein, we present a comprehensive study of H₂ storage in alkali metal decorated and defect containing 2D borophene using density functional theory calculations..

Recent progress in boron nanomaterials

Various types of zero, one, and two-dimensional boron nanomaterials such as nanoclusters, nanowires, nanotubes, nanobelts, nanoribbons, nanosheets, and monolayer crystalline sheets named borophene have been experimentally synthesized and identified in the last 20 years. Owing to their low dimensionality, boron nanomaterials have different bonding configurations from those of three-dimensional bulk boron crystals composed of icosahedra or icosahedral fragments. The resulting intriguing physical and chemical properties of boron nanomaterials are fascinating from the viewpoint of material science. Moreover, the wide variety of boron nanomaterials themselves could be the building blocks for combining with other existing nanomaterials, molecules, atoms, and/or ions to design and create materials with new functionalities and properties. Here, the progress of the boron nanomaterials is reviewed and perspectives and future directions are described.

Heterogeneous activation of peroxymonosulfate by amorphous boron for degradation of bisphenol S

Recently, tremendous efforts have been devoted to developing carbon-based metal-free catalysts as an alternative to metal-based catalysts for remediation of emerging contaminants. However, further investigations have demonstrated that the durability of carbocatalysts is poor. Therefore, it is extremely desirable to seek a novel metal-free catalyst with high efficiency and superb stability. Herein, we first discovered that amorphous boron (A-boron) can be used as a metal-free catalyst for peroxymonosulfate (PMS) activation to produce free radicals for effective degradation of bisphenol S (BPS), which is a newly-occurring estrogenic endocrine-disrupting chemical. It exhibited outstanding catalytic activity and superior stability as comparing to metal-based and metal-free carbon-based catalysts. Moreover, many other typical organic pollutants in water such as bisphenol F, sulfamethoxazole, rhodamine B and methyl orange can also be effectively decomposed in A-boron/PMS oxidative system. The effects of reaction parameters on BPS degradation were systematically investigated. The catalytic oxidation mechanism was proposed. The intriguing catalytic feature of A-boron discovered in this study will provide new opportunities for the future development of A-boron based materials with promising applications in water remediation.

Chelation assisted exfoliation of layered borides towards synthesizing boron based nanosheets

Selective extraction of inter-layer metal atoms by the chelating agent delaminates layered metal borides into boron based nanosheets.

Boron Nitride Nanostructures: Fabrication, Functionalization and Applications

Boron nitride (BN) structures are featured by their excellent thermal and chemical stability and unique electronic and optical properties. However, the lack of controlled synthesis of quality samples and the electrically insulating property largely prevent realizing the full potential of BN nanostructures. A comprehensive overview of the current status of the synthesis of two-dimensional hexagonal BN sheets, three dimensional porous hexagonal BN materials and BN-involved heterostructures is provided, highlighting the advantages of different synthetic methods. In addition, structural characterization, functionalizations and prospective applications of hexagonal BN sheets are intensively discussed. One-dimensional BN nanoribbons and nanotubes are then discussed in terms of structure, fabrication and functionality. In particular, the existing routes in pursuit of tunable electronic and magnetic properties in various BN structures are surveyed, calling upon synergetic experimental and theoretical efforts to address the challenges for pioneering the applications of BN into functional devices. Finally, the progress in BN superstructures and novel B/N nanostructures is also briefly introduced.

Boron based two-dimensional crystals: theoretical design, realization proposal and applications

The successful realization of free-standing graphene and the various applications of its exotic properties have spurred tremendous research interest for two-dimensional (2D) layered materials. Besides graphene, many other 2D materials have been successfully produced by experiment, such as silicene, monolayer MoS2, few-layer black phosphorus and so on. As a neighbor of carbon in the periodic table, element boron is interesting and many researchers have contributed their efforts to realize boron related 2D structures. These structures may be significant both in fundamental science and future technical applications in nanoelectronics and nanodevices. In this review, we summarize the recent developments of 2D boron based materials. The theoretical design, possible experimental realization strategies and their potential technical applications are presented and discussed. Also, the current challenges and prospects of this area are discussed.