Facet-Controlled Synthetic Strategy of Cu2O-Based Crystals for Catalysis and Sensing

Microgalvanic cell-mediated green synthesis of Cu2O nanocubes with (100) facets for boosting dopamine hydrochloride sensing performance

Despite numerous efforts have been made on exploring the preparation, properties and application of Cu2O nanocrystal, there is still a lack of a facile and green synthesis strategy to obtain well-defined Cu2O nanocubes (NCs). And exploration of the superior low-index lattice plane of Cu2O in electrochemical sensing is also inadequate. Herein, we proposed a Ni(OH)2-mediated in-situ synthetic strategy for the preparation of Cu2O NCs enclosed by low-index facets with simple procedure, mild temperature and low energy-consumption. The Ni(OH)2 sites not only facilitated the contact between Cu2+ and the substrate Ni foam (NF), but also can combine with the NF to act as a primary battery to regulate the nucleation and growth rate of Cu2O (100) facets. Benefiting from the high ratio of exposed electroneutral (100) lattice planes of nanocubes, the Cu2O NCs formed on Ni(OH)2-abundant Ni Foam (Cu2O NCs/NFEO) exhibited a wide linear range (3.25-1178.8 μM), a low detection limit (1.86 μM) and a high sensitivity (900 μA mM-1 cm-2) in dopamine hydrochloride (DAH) electrochemical sensing. This work expects to provide more clues about the relationship between different dominant low-index facets of Cu2O NCs and electrochemical sensing performance towards DAH, and thereby contributes to the development of functional materials based on Cu2O nanocrystals with desirable facets.

Enzyme-free fluorescent DNA detection based on nucleic acid-templated click reaction via controllable synthesis of Cu2O as heterogeneous nanocatalyst

In the field of nucleic acid amplification assays, developing enzyme-free, easy-to-use, and highly sensitive amplification approaches remains a challenge. In this work, we synthesized a heterogeneous Cu2O nanocatalyst (hnCu2O) with different particle sizes and shapes, which was used for developing enzyme- and label-free nucleic acid amplification methods based on the nucleic acid-templated azide-alkyne cycloaddition (AAC) reaction catalyzed by hnCu2O. The hnCu2O exhibited size- and shape-dependent catalytic activity, with smaller sizes and spherical-like shapes exhibiting superior activity. Spherical-like hnCu2O (61 ± 8 nm) not only achieved a ligation yield of up to 84.2 ± 3.9 % in 3 min but also exhibited faster kinetics in the nucleic acid-templated hnCu2O-catalyzed AAC reaction, with a high reaction rate of 0.65 min-1 and a half-life of 1.07 ± 0.09 min. Based on this result, we developed nucleic acid-templated click ligation linear amplification reaction (NA-CLLAR) and nucleic acid-templated click ligation exponential amplification reaction (NA-CLEAR) approach. By combining the recognition (complementary to the target sequence) and signal output (split G-quadruplex sequence) elements into a DNA probe, the NA-CLLAR and NA-CLEAR fluorescence assays achieved highly specific detection of target nucleic acids, with a detection limit of 2.8 aM based on G-quadruplex-enhanced fluorescence. This work is a valuable reference and will inspire researchers to design enzyme-free nucleic acid signal amplification strategies by developing different types of Cu(I) catalysts with improved catalytic activity.

A sensitive electrochemical immunosensor based on high-efficiency catalytic cycle amplification strategy for detection of cardiac troponin I

An electrochemical immunosensor based on the novel high efficiency catalytic cycle amplification strategy for the sensitive detection of cardiac troponin I (cTnI). With its variable valence metal elements and spiny yolk structure, the Cu2O/CuO@CeO2 nanohybrid exhibits high speed charge mobility and exceptional electrochemical performance. Notably, fluorite-like cubic crystal CeO2 shell would undergo redox reaction with Cu2O core, which successfully ensures the continuous recycling occurrence of "fresh" Cu (II)/Cu (I) and Ce (Ⅳ)/Ce (Ⅲ) pairs at the electrode interface. The "fresh" active sites continue to emerge constantly, resulting in a significant increase in the current signal. In light of the electrochemical characterization, the electron transfer pathway and catalytic cycle mechanism among CeO2, Cu2O and CuO were further discussed. The developed electrochemical immunosensor detected cTnI from 100 fg/mL to 100 ng/mL with a LOD of 15.85 fg/mL under optimal conditions. The analysis results indicate that the immunosensor would hold promise for broad application prospects in the biological detection for other biomarkers.

Rational Design of Three Dimensional Hollow Heterojunctions for Efficient Photocatalytic Hydrogen Evolution Applications

The efficiency of photocatalytic hydrogen evolution is currently limited by poor light adsorption, rapid recombination of photogenerated carriers, and ineffective surface reaction rate. Although heterojunctions with innovative morphologies and structures can strengthen built-in electric fields and maximize the separation of photogenerated charges. However, how to rational design of novel multidimensional structures to simultaneously improve the above three bottleneck problems is still a research imperative. Herein, a unique Cu2O─S@graphene oxide (GO)@Zn0.67Cd0.33S Three dimensional (3D) hollow heterostructure is designed and synthesized, which greatly extends the carrier lifetime and effectively promotes the separation of photogenerated charges. The H2 production rate reached 48.5 mmol g-1 h-1 under visible light after loading Ni2+ on the heterojunction surface, which is 97 times higher than that of pure Zn0.67Cd0.33S nanospheres. Furthermore, the H2 production rate can reach 77.3 mmol g-1 h-1 without cooling, verifying the effectiveness of the photothermal effect. Meanwhile, in situ characterization and density flooding theory calculations reveal the efficient charge transfer at the p-n 3D hollow heterojunction interface. This study not only reveals the detailed mechanism of photocatalytic hydrogen evolution in depth but also rationalizes the construction of superior 3D hollow heterojunctions, thus providing a universal strategy for the materials-by-design of high-performance heterojunctions.

Hydrolysis-Induced Cu2O Networks and the Triggered Peroxidase-Mimic Activity by Cr6+ under Neutral Conditions

The current small-scale synthesis and relatively large size of Cu2O have limited its practical applications. Herein, we developed a hydrolysis strategy to prepare phase-pure Cu2O networks composed of small granules (ca. 25 nm) on a gram scale. The preparation involves in situ hydrolyzing the Hx[CuxCl2x] complexes prereduced in N,N'-dimethylformamide (DMF). The DMF-soluble Hx[CuxCl2x] complexes are critical for the homogeneous nucleation of CuCl seeds and subsequent hydrolysis, allowing for separate control over the nucleation and growth stages to regulate the formation of Cu2O networks. The novel Cu2O networks possess numerous exposed active sites and hierarchical porosities, conferring high catalytic activity and fast mass transfer capability. The inherent peroxidase-mimic activity of Cu2O is severely inhibited under neutral conditions but can be triggered by Cr6+, enabling the colorimetric assay of Cr6+ with the assistance of the oxidation-induced color change of 3,3',5,5'-tetramethylbenzidine. Through density functional theory calculation, we confirmed that the attachment of Cr6+ on the Cu2O surface reduced the dissociation energy of H2O2, enhancing the enzyme-mimic activity. The colorimetric detection method demonstrated a sensitive and specific assay capability for Cr6+ (LOD = 0.095 μM). Our work offers a straightforward protocol for novel design of metal or metal-based nanomaterials for nanozymes or other applications.

Sustainable, efficient, and synergistic photocatalytic degradation toward organic dyes and formaldehyde gas via Cu2O NPs@wood

Cuprous oxide (Cu2O) nanoparticles (NPs) was anchored on wood by simple spraying method, then both soft and hard wood has been endowed efficient function photocatalytic degradation toward organic dyes and formaldehyde gas synergistically. The best recycle ability of wood based photocatalyst toward organic pollutants was achieved, which was characterized by photocatalytic degradation efficiency of methylene blue (MB) more than 95% after 100 cycles, and formaldehyde gas over 85% after 60 cycles. Cu2O NPs@wood performed much lower forbidden bandwidth (Eg), which accelerated to generate much more radical of e- and finally promoted the capacity of photocatalytic degradation. The proposed Cu2O NPs@wood catalysts has potential to be applied both in the field of wastewater and air pollution remediation.

Antimicrobial Activity of Morphology-Controlled Cu2O Nanoparticles: Oxidation Stability under Humid and Thermal Conditions

Metal oxides can be used as antimicrobial agents, especially since they can be fabricated into various forms such as films, masks, and filters. In particular, the durability of antimicrobial agents and the duration of their antimicrobial activity are important factors that determine their suitability for a specific purpose. These factors are related to the morphology and size of particles. The metal oxide Cu2O is often oxidized to CuO in various conditions, which reduces its antimicrobial activity. This study focused on the oxidation of nanoparticles of Cu2O with three morphologies, namely, spherical, octahedral, and cubic morphologies, in excessively humid and excessive-thermal environments for a specific duration and the antimicrobial activity of the NPs. Cu2O nanoparticles were prepared using the chemical reduction method, and their morphology could be varied by adjusting the molar ratio of OH- to Cu2+ and changing the reducing agent. It was found that cubic Cu2O was the most stable against oxidation and had the smallest reduction in antimicrobial activity. This study examined the antimicrobial activity and the oxidation stability of Cu2O NPs with different morphologies but similar particle sizes.

Direct Observation of Hollow Bimetallic Nanoparticle Formation through Galvanic Replacement and Etching Reactions

Hollow bimetallic nanoparticles (NPs) formed from metal oxide NP templates are widely used catalysts for hydrogen evolution and CO2 reduction reactions. Despite their importance in catalysis, the details of how these NPs form on the NP templates remain unclear. Here, using in situ liquid-phase transmission electron microscopy (TEM) imaging, we describe the conversion of Cu2O template NPs to hollow PdCu NPs. Our observations show that a polycrystalline PdCu shell forms on the surface of the template via a galvanic replacement reaction while the template undergoes anisotropic etching. This study provides important insights into the synthesis of hollow metallic nanostructures from metal oxide templates.

In-Situ-Grown Cu Dendrites Plasmonically Enhance Electrocatalytic Hydrogen Evolution on Facet-Engineered Cu2 O

Herein, facet-engineered Cu2 O nanostructures are synthesized by wet chemical methods for electrocatalytic HER, and it is found that the octahedral Cu2 O nanostructures with exposed crystal planes of (111) (O-Cu2 O) has the best hydrogen evolution performance. Operando Raman spectroscopy and ex-situ characterization techniques showed that Cu2 O is reduced during HER, in which Cu dendrites are grown on the surface of the Cu2 O nanostructures, resulting in the better HER performance of O-Cu2 O after HER (O-Cu2 O-A) compared with that of the as-prepared O-Cu2 O. Under illumination, the onset potential of O-Cu2 O-A is ca. 52 mV positive than that of O-Cu2 O, which is induced by the plasmon-activated electrochemical system consisting of Cu2 O and the in-situ generated Cu dendrites. Incident photon-to-current efficiency (IPCE) measurements and the simulated UV-Vis spectrum demonstrate the hot electron injection (HEI) from Cu dendrites to Cu2 O. Ab initio nonadiabatic molecular dynamics (NAMD) simulations revealed the transfer of photogenerated electrons (27 fs) from Cu dendrites to Cu2 O nanostructures is faster than electron relaxation (170 fs), enhancing its surface plasmons activity, and the HEI of Cu dendrites increases the charge density of Cu2 O. These make the energy level of the catalyst be closer to that of H+ /H2 , evidenced by the plasmon-enhanced HER electrocatalytic activity.

Galvanic Replacement Reaction: Enabling the Creation of Active Catalytic Structures

The galvanic replacement reaction (GRR) is recognized as a redox process where one metal undergoes oxidation by the ions of another metal possessing a higher reduction potential. This reaction takes place at the interface between a substrate and a solution containing metal ions. Utilizing metal or metal oxide as sacrificial templates enables the synthesis of metallic nanoparticles, oxide-metal composites, and mixed oxides through GRR. Growing evidence showed that GRR has a direct impact on surface structures and properties. This has generated significant interest in catalysis and opened up new horizons for the application of GRR in energy and chemical transformations. This review provides a comprehensive overview of the synthetic strategies utilizing GRR for the creation of catalytically active structures. It discusses the formation of alloys, intermetallic compounds, single atom alloys, metal-oxide composites, and mixed metal oxides with diverse nanostructures. Additionally, GRR serves as a postsynthesis method to modulate metal-oxide interfaces through the replacement of oxide domains. The review also outlines potential future directions in this field.

Coating the surface of interconnected Cu2O nanowire arrays with HKUST-1 nanocrystals via electrochemical oxidation

Controlling the crystallization of Metal-Organic Frameworks (MOFs) at the nanoscale is currently challenging, and this hinders their utilization for multiple applications including photo(electro)chemistry and sensors. In this work, we show a synthetic protocol that enables the preparation of highly homogeneous Cu2O@MOF nanowires standing on a conductive support with extensive control over the crystallization of the MOF nanoparticles at the surface of the Cu2O nanowires. Cu2O nanowires were first prepared via templated electrodeposition, and then partially converted into the well-known Cu-MOF HKUST-1 by pulsed electrochemical oxidation. We show that the use of PVP as a capping agent during the electrochemical oxidation of Cu2O into HKUST-1 provides control over the growth of the MOF nanocrystals on the surface of the Cu2O nanowires, and that the size of the MOF crystals obtained can be tuned by changing the concentration of PVP dissolved in the electrolyte. In addition, we propose the use of benzoic acid as an alternative to achieve control over the size of the obtained MOF nanocrystals when the use of a capping agent should be avoided.

Engineering the Au-Cu2 O Crystalline Interfaces for Structural and Catalytic Integration

Precise structural control has attracted tremendous interest in pursuit of the tailoring of physical properties. Here, this work shows that through strong ligand-mediated interfacial energy control, Au-Cu₂ O dumbbell structures where both the Au nanorod (AuNR) and the partially encapsulating Cu₂ O domains are highly crystalline. The synthetic advance allows physical separation of the Au and Cu₂ O domains, in addition to the use of long nanorods with tunable absorption wavelength, and the crystalline Cu₂ O domain with well-defined facets. The interplay of plasmon and Schottky effects boosts the photocatalytic performance in the model photodegradation of methyl orange, showing superior catalytic efficiency than the AuNR@Cu₂ O core-shell structures. In addition, compared to the typical core-shell structures, the AuNR-Cu₂ O dumbbells can effectively electrochemically catalyze the CO₂ to C₂₊ products (ethanol and ethylene) via a cascade reaction pathway. The excellent dual function of both photo- and electrocatalysis can be attributed to the fine physical separation of the crystalline Au and Cu₂ O domains.

Fabrication of direct Z-scheme Cu2O@V-CN (octa) heterojunction with exposed (111) lattice planes and nitrogen-rich vacancies for rapid sterilization

The Z-scheme heterojunction has demonstrated significant potential for promoting photogenerated carrier separation. However, the rational design of all-solid Z-scheme heterojunctions catalysts and the controversies about carrier transfer path of direct Z-scheme heterojunctions catalysts face various challenges. Herein, a novel heterojunction, Cu₂O@V-CN (octa), was fabricated using V-CN (carbon nitride with nitrogen-rich vacancies) in-situ electrostatic self-wrapping Cu₂O octahedra. Density functional theory (DFT) calculations revealed that the separation of carriers across the Cu₂O@V-CN (octa) heterointerface was directly mapped to the Z-scheme mechanism compared to Cu₂O/V-CN (sphere). This is because the Cu₂O octahedra expose more highly active (111) lattice planes with more terminal Cu atoms and V-CN with abundant nitrogen vacancies to form delocalized electronic structures like electronic reservoirs. This facilitates the wrapping of Cu₂O octahedra by V-CN and protects their stability via tighter interfacial contact, thus enhancing the tunneling of carriers for rapid photocatalytic sterilization. These findings provide novel approaches for designing high-efficiency Cu₂O-based photocatalytic antifoulants for practical applications.

Procedure to Obtain Cu2O Isolate Films, Structural, Electrical, and Morphological Characterization, and Its Use as an Electrical Isolator to Build a New Tube Furnace

Copper oxide is a widely studied compound in wastewater decontamination, hydrogen production, solar cell production, and sensor fabrication. In recent years, many architectures and structures with the potential for developing clean technologies have been synthesized. A procedure by thermal oxidation to grow electrical insolate Cu2O films on copper surfaces in an air atmosphere was developed. The results of the morphological and structural characterization of the copper oxide layers evidence the presence of Cu2O polycrystalline films. The films have polyhedral architectures of approximately 1.4 μm thickness and are electrically insulating. A novel copper resistive furnace was built using this copper oxide film which was used as an electrical insulator between the electrical resistance of the heater and the surface of the copper thermal block. The application improves the efficiency of the resistive furnace in terms of the temperature reached and the thermal coupling response time relative to the performance of conventional furnaces using ceramic insulation. Over the entire operating temperature range explored for the same power supply, the copper oxide-coated furnace achieved higher temperatures and faster response times than the traditionally coated furnace.

The role of crystal facets and disorder on photo-electrosynthesis

Photoelectrochemistry has the potential to play a crucial role in the storage of solar energy and the realisation of a circular economy. From a chemical viewpoint, achieving high conversion efficiencies requires subtle control of the catalyst surface and its interaction with the electrolyte. Traditionally, such control has been hard to achieve in the complex multinary oxides used in PEC devices and consequently the mechanisms by which surface exposed facets influence light-driven catalysts are poorly understood. Yet, this understanding is critical to further improve conversion yields and fine-tune reaction selectivities. Here, we review the impact that crystal facets and disorder have on photoelectrochemical reactivity. In particular, we discuss how the crystal orientation influences the energetics of the surface, the existence of defects and the transport of reactive charges, ultimately dictating the PEC activity. Moreover, we evaluate how facet stability dictates the tendency of the solid to undergo reconstructions during catalytic processes and highlight the experimental and computational challenges that must be overcome to characterise the role of the exposed facets and disorder in catalytic performance.

Quantum Dot-Based Micromotors with NIR-I Light Photocatalytic Propulsion and NIR-II Fluorescence

Here, we report the first PbS quantum dot (QD)-based micromotors with NIR-I light-driven photocatalytic propulsion and NIR-II fluorescence. Under the irradiation of NIR-I light (808 nm), PbS QD-doped cuprous oxide (Cu₂O@PbS) micromotors can display efficient propulsion in a variety of biocompatible fuels such as malic acid, glucose, and urea. Among them, the Cu₂O@PbS micromotors exhibit the best propulsion performance in a very low concentration of malic acid, with an average speed as high as 11.86 μm/s. The enhanced NIR-I photocatalytic activity of Cu₂O@PbS micromotors benefits from the doping of NIR-I PbS QDs that can be excited by NIR-I light and exhibit high electron transport efficiency. The doped PbS QDs can effectively increase the absorption efficiency of the micromotors in the NIR-I region while also inhibiting the recombination of photogenerated electron-hole pairs. Interestingly, due to the presence of NIR PbS QDs, the Cu₂O@PbS micromotors demonstrate prominent and stable NIR-II fluorescence (emission wavelength: 1100 nm), which offer promising potential for visualization of their position in vivo. In comparison to other photocatalytic micromotors, the simple fabrication strategy, excellent NIR-II fluorescence, together with the NIR-I light-dependent propulsion behavior of the current Cu₂O@PbS micromotors, thus pave the way for further development of advanced smart "robots" for intelligent biomedical applications.

Chloride-ion-directed synthesis of plate-like Cu2O mesocrystals for effective nitrogen fixation

Cuprous oxide (Cu₂O) mesocrystals, which are composed of numerous nanocrystals with a common crystallographic orientation, are supposed to possess superior photocatalytic abilities than the normal constructions, but very few of them have been reported to date. In this work, plate-like Cu₂O mesocrystals were successfully fabricated via a facile one-pot wet chemical strategy. Unlike the commonly used polymers or small molecules, chloride ions (Cl^-) were employed as structure-directing agents and played the main role in the Cu₂O mesocrystal formation. The formation mechanism was interpreted as follows: the presence of Cl^- inhibited the formation of CuO and Cu by forming the intermediate product CuCl, which was further hydrolyzed to Cu₂O nanocrystals. Cl^- tended to adsorb on the (111) facets of the formed Cu₂O nanocrystals and stabilize them. Then the Cu₂O nanocrystals were aligned side by side through the unabsorbed side faces, leading to mutual nanocrystals orientation and crystallographic lock-in, facilitating the formation of plate-like Cu₂O mesocrystals. The polymer, polyacrylamide (PAM), also promoted the mesocrystals formation by serving as a stabilizer and fixed the crystallographic orientation of the Cu₂O nanocrystals during their orderly stacking process. The plate-like Cu₂O mesocrystals showed a long decay time and pronounced performance toward the visible-light-driven photocatalytic reduction of N₂ into NH₃. This research may stimulate in-depth investigations into the exploration of new synthetic methods for the design and construction of novel mesocrystals.

Green synthesis of water splitting electrocatalysts: IrO2 nanocages via Pearson's chemistry

Highly porous iridium oxide structures are particularly well-suited for the preparation of porous catalyst layers needed in proton exchange membrane water electrolyzers. Herein, we report the formation of iridium oxide nanostructured cages, via a water-based process performed at room temperature, using cheap Cu2O cubes as the template. In this synthetic approach, based on Pearson's hard and soft acid-base theory, the replacement of the Cu2O core by an iridium shell is permitted by the difference in hardness/softness of cations and anions of the two reactants Cu2O and IrCl3. Calcination followed by acid leaching allow the removal of residual copper oxide cores and leave IrO2 hierarchical porous structures with outstanding activity toward the oxygen evolution reaction. Fundamental understanding of the reaction steps and identification of the intermediates are permitted by coupling a set of ex situ and in situ techniques including operando time-resolved X-ray absorption spectroscopy during the synthesis.

Cu2O/Ti3C2Txnanocomposites for detection of triethylamine gas at room temperature

Triethylamine gas is one of the harmful volatile organic compounds for human health and the ecological environment. Therefore, in order to prevent the detrimental effects of triethylamine gas, it has greatly requirement to be accurately detected. Unfortunately, Cu₂O has a low triethylamine gas response and slow recovery. Because of this, we prepared Cu₂O/Ti₃C₂T_xnanocomposites by a facile ultrasonication technique. Cu₂O is uniformly dispersed on the surface and interlayers of multilayer Ti₃C₂T_xto form a stable hybrid heterostructure. The optimized Cu₂O/Ti₃C₂T_xnanocomposite sensor's response to 10 ppm triethylamine at room temperature is 181.6% (∣R_g-R_a∣/R_a × 100%). It is 3.5 times higher than the original Cu₂O nanospheres (52.1%). Moreover, due to the characteristics of high carrier migration rate and excellent conductivity of Ti₃C₂T_x, the response recovery rate (1062 s/74 s) of Cu₂O/Ti₃C₂T_xcomposites is greatly improved than pristine Cu₂O (3169 s/293 s). In addition, Cu₂O/Ti₃C₂T_xnanocomposites sensor also shows excellent repeatability, outstanding selectivity, and long-term stability. Thus, the Cu₂O/Ti₃C₂T_xnanocomposites sensor has broad application prospects for detecting triethylamine gas at room temperature.

Crystal Facet Dependent Energy Band Structures of Polyhedral Cu2O Nanocrystals and Their Application in Solar Fuel Production

We demonstrated a facile hydrothermal method to synthesize the (100)-, (110)- and (111)-oriented Cu₂O nanocrystals (NCs) by controlling the concentration of the incorporated anions (CO₃^2- and SO₃^2-). The crystal facet dependent activity of the orientation controlled Cu₂O NCs in the rhodamine B (RhB) photodegradation and photocatalytic hydrogen (H₂) evolution was found to follow the trend: (111) > (110) > (100). The mechanism was investigated by characterizing the optical property, energy band structure, interfacial charge carrier dynamics and reducing ability. The results indicated that the (111)-oriented Cu₂O NCs exhibit the higher conduction band (CB) potential as compared with the (110)-oriented and (100)-oriented Cu₂O NCs, which resulted in the largest driving force of interfacial electron transfer for (111)-oriented Cu₂O NCs to carry out solar fuel generation. The current study offers an easy strategy for crystal facet engineering of semiconductors and provides important physical insights into their electronic properties for the desired solar energy conversions.

Voltammetric Detection of Glucose-The Electrochemical Behavior of the Copper Oxide Materials with Well-Defined Facets

Cu₂O nanomaterials with well-defined facets and uniform size were synthesized by a wet-chemical method. Regardless of the additive composition, powders crystallize mostly in cuprite form. To compare their electrochemical behavior, the obtained materials were deposited on carbon glassy electrodes. The response to glucose from the materials with different exposed facets was recorded with a delay at the anodic curve. The chronoamperometric analyses (AMP) exhibited a lower signal in contrast to the cyclic voltammetry data (CV), indicating that the number of active sites involved in glucose oxidation processes resulting from the structure of the material is insufficient. For samples with dominant (100) or (111) planes, a typical characteristic was observed, however, with an additional peak at the anodic curve. The location of the peaks is approximately the same and no significant differences from the AMP and CV analysis were observed. The sample enclosed by the (111) facets exhibited higher activity; however, as a result of the redox reaction with glucose molecules, the surface state is changing. Cu₂O materials enclosed by (100) planes exhibited optimal sensitivity as well as a large detective range. Samples with differential facet exposition present various current-potential profiles, as the effect of binder-particle interaction with Nafion.

Room Temperature Engineering Crystal Facet of Cu2O for Photocatalytic Degradation of Methyl Orange

Cuprous oxide (Cu₂O) has received enormous interest for photocatalysis owing to its narrow band gap of 2.17 eV, which is beneficial for visible-light absorption. In this work, we succeeded in synthesizing Cu₂O nanocrystals with two morphologies, cube and sphere, at room temperature via a simple wet-chemistry strategy. The morphologies of Cu₂O change from cube to sphere when adding PVP from 0 g to 4 g and the mainly exposed crystal faces of cubic and spherical Cu₂O are (100) and (111), respectively. The photocatalytic properties of the as-prepared Cu₂O were evaluated by the photocatalytic degradation of methyl orange (MO). Cubic Cu₂O(100) showed excellent photocatalytic activity. After the optical and photoelectric properties were investigated, we found that cubic Cu₂O(100) has better photoelectric separation efficiency than spherical Cu₂O(111). Finally, the possible mechanism was proposed for cubic Cu₂O(100) degrading MO under visible light.

Microfluidics-Assisted Synthesis of Hierarchical Cu2 O Nanocrystal as C2 -Selective CO2 Reduction Electrocatalyst

Copper-based catalysts have attracted enormous attention due to their high selectivity for C₂₊ products during the electrochemical reduction of CO₂ (CO₂ RR). In particular, grain boundaries on the catalysts contribute to the generation of various Cu coordination environments, which have been found essential for C-C coupling. However, smooth-surfaced Cu₂ O nanocrystals generally lack the ability for the surface reorganization to form multiple grain boundaries and desired Cu undercoordination sites. Flow chemistry armed with the unparalleled ability to mix reaction mixture can achieve a very high concentration of unstable reaction intermediates, which in turn are used up rapidly to lead to kinetics-driven nanocrystal growth. Herein, the synthesis of a unique hierarchical structure of Cu₂ O with numerous steps (h-Cu₂ O ONS) via flow chemistry-assisted modulation of nanocrystal growth kinetics is reported. The surface of h-Cu₂ O ONS underwent rapid surface reconstruction under CO₂ RR conditions to exhibit multiple heterointerfaces between Cu₂ O and Cu phases, setting the preferable condition to facilitate C-C bond formation. Notably, the h-Cu₂ O ONS obtained the increased C₂ H₄ Faradaic efficiency from 31.9% to 43.5% during electrocatalysis concurrent with the morphological reorganization, showing the role of the stepped surface. Also, the h-Cu₂ O ONS demonstrated a 3.8-fold higher ethylene production rate as compared to the Cu₂ O nanocube.

Metal Oxide Chemiresistors: A Structural and Functional Comparison between Nanowires and Nanoparticles

Metal oxide nanowires have become popular materials in gas sensing, and more generally in the field of electronic and optoelectronic devices. This is thanks to their unique structural and morphological features, namely their single-crystalline structure, their nano-sized diameter and their highly anisotropic shape, i.e., a large length-to-diameter aspect ratio. About twenty years have passed since the first publication proposing their suitability for gas sensors, and a rapidly increasing number of papers addressing the understanding and the exploitation of these materials in chemosensing have been published. Considering the remarkable progress achieved so far, the present paper aims at reviewing these results, emphasizing the comparison with state-of-the-art nanoparticle-based materials. The goal is to highlight, wherever possible, how results may be related to the particular features of one or the other morphology, what is effectively unique to nanowires and what can be obtained by both. Transduction, receptor and utility-factor functions, doping, and the addition of inorganic and organic coatings will be discussed on the basis of the structural and morphological features that have stimulated this field of research since its early stage.

Facet-controlled Synthesis and Morphological Evolution of Cu2O Microcrystals

Cu2O microcrystals were prepared through reduction of Cu2+ ions by glucose in an alkaline aqueous solution. Various shapes of Cu2O microcrystals were obtained by adjusting the reaction temperature, NaOH concentration,...

An efficient hydrogen evolution photocatalyst of Rh@Cr2O3 loaded PbMoO4 twenty-six facets polyhedron

Shape anisotropic semiconductor is advanced catalyst for resolving energy crises. However, modification studies are still needed to overcome its intrinsic disadvantages, such as the lack of active sites. For this...

Imaging and Manipulating the Conversion from Single Cuprous Oxide Microparticles to Single Metal Hydroxide Microstructures

The template-assisted route is an effective avenue for the preparation of core-shell and hollow micromaterials. However, the conversion process is usually characterized by ex situ transmission electron microscopy, limiting the comprehensive understanding of the structure evolution. Here, we use dark-field microscopy (DFM) to visually image the chemical conversion process of Cu₂O concave microcubes into metal hydroxide (MHs, M = Co, Ni, and Mn) microstructures at the single-particle level. The details of the conversion process such as early steps in the conversion reaction, intermediate states, and final states are successfully tracked in real time. The in situ DFM experiments clarify that the etching of Cu₂O predates the generation of MHs, and the conversion reaction shows significant particle-to-particle variation. Meanwhile, the results also show that experimental parameters dominate the conversion of Cu₂O concave microcubes, allowing for the precise manipulation of the reaction degree to obtain Cu₂O@Co(OH)₂ core-shell microstructures with different shell thicknesses and hollow Co(OH)₂ microstructures. The present work offers a direct observation and manipulation of the conversion process of Cu₂O microparticles, paving the way for rational design and preparation of various core-shell and hollow micromaterials.

The Crystal Plane is not the Key Factor for CO2 -to-Methane Electrosynthesis on Reconstructed Cu2 O Microparticles

Cu₂ O microparticles with controllable crystal planes and relatively high stability have been recognized as a good platform to understand the mechanism of the electrocatalytic CO₂ reduction reaction (CO₂ RR). Herein, we demonstrate that the in situ generated Cu₂ O/Cu interface plays a key role in determining the selectivity of methane formation, rather than the initial crystal plane of the reconstructed Cu₂ O microparticles. Experimental results indicate that the methane evolution is dominated on all three different crystal planes with similar Tafel slopes and long-term stabilities. Density functional theory (DFT) calculations further reveal that *CO is protonated via a similar bridge configuration at the Cu₂ O/Cu interface, regardless of the initial crystal planes of Cu₂ O. The Gibbs free energy changes (ΔG) of *CHO on different reconstructed Cu₂ O planes are close and more negative than that of *OCCOH, indicating the methane formation is more favorable than ethylene on all Cu₂ O crystal planes.

Hydroxyl ions: flexible tailoring of Cu2O crystal morphology

The precise control architectures of Cu2O crystals are very crucial, which have a significant influence on their various performances. Herein, Cu2O crystals with diverse architectures were achieved via finely adjusting the concentration of NaOH. The intriguing results showed that the addition of specific amounts of OH- to the solution was crucial to tailor the morphology and size of the resulting microcrystals. We observed the evolution of the shapes of the Cu2O microcrystals, which change from a rhombic dodecahedron to spherical, octahedral-like and then to hexapod upon the increase in the NaOH concentration. Adjusting the volume of NaOH added provides a means to vary the particle size. Furthermore, density functional theory (DFT) may reveal that OH- ions serve as an efficient coordination agent selectively adsorbing onto different crystal faces of Cu2O crystals modifying the crystal energies, inducing the structure anisotropy on crystal growth. This work reveals that an effective and facile strategy has been developed for morphology-control of Cu2O crystals.

Active Sites and Interfacial Reducibility of CuxO/CeO2 Catalysts Induced by Reducing Media and O2/H2 Activation

The development of a highly efficient and stable catalyst for preferential oxidation of CO for the commercialization of proton-exchange membrane fuel cells has been a result of continuous effort. The main challenge is the simultaneous control of abundant active sites and interfacial reducibility over the catalyst Cu_xO/CeO₂. Here, we report a strategy to modulate porosity, active sites, and O-vacancy sites (O_V) by reducing media and O₂/H₂ activation. O₂-pretreated CeO₂-supported Cu catalysts unequivocally demonstrate the low-temperature activity owing to the excess concentrations of Cu⁺ and Cu²⁺ as well as the relative population of Ce³⁺ and O-vacancy sites at the surface. O₂ activation improves the Cu²⁺ diffusion into the CeO₂ lattice to generate the synergistic effect and induces the formation of electron-enriched Cu²⁺-O_V-Ce³⁺ sites, which accelerate the activation and dissociation of CO/O₂ and the formation of reactive oxygen species during catalysis. Density function theory (DFT) calculations reveal that CO adsorbs on Cu₂O {110} and CuO {111} with relatively optimal adsorption energy and longer C-Cu lengths in contrast to that on Cu {111}, favoring the adsorption and desorption of CO. These are crucial for ongoing CO oxidation, producing CO₂ by the Mars-van Krevelen mechanism.

Visible-light-driven cuprous oxide nanomotors with surface-heterojunction-induced propulsion

The controllable synthesis and customized design of micro/nanomotors represents a highly desired paradigm in the field of intelligent nanovehicles. Exploiting asymmetrical structures and geometry-dependent propulsion are the two main strategies for achieving light-driven micro/nanomotors. However, inherent crystal-structure differences in a single colloidal motor have rarely been explored. Here, we propose the first surface-heterojunction-induced propulsion methodology for cuprous oxide (Cu₂O) nanomotors, by tailoring the crystal morphology of a Cu₂O crystalloid from a sphere into a truncated octahedron and preserving the controllable-index crystal facets of {100} and {111} in a single colloid. Due to the high crystallinity and distinct activity of the exposed crystal facets, a surface heterojunction between the {100} and {111} facets is formed to enhance electron-hole separation, as confirmed by density functional theory (DFT) calculations, thus endowing the truncated octahedral Cu₂O nanomotors with autonomous and vigorous movement in biocompatible fuels under visible light. These Cu₂O nanomotors can reach a propulsion speed in water of over two times faster than that of polycrystalline spherical motors with low crystallinity. The efficient Cu₂O nanomotors offer a promising guideline not only for the synthesis of novel light-driven motors with desired structures, but also for potential applications in biocompatible environments.

Engineering porous Pd-Cu nanocrystals with tailored three-dimensional catalytic facets for highly efficient formic acid oxidation

Rational synthesis of bi- or multi-metallic nanomaterials with both dendritic and porous features is appealing yet challenging. Herein, with the cubic Cu₂O nanoparticles composed of ultrafine Cu₂O nanocrystals as a self-template, a series of Pd-Cu nanocrystals with different morphologies (e.g., aggregates, porous nanodendrites, meshy nanochains and porous nanoboxes) are synthesized through simply regulating the molar ratio of the Pd precursor to the cubic Cu₂O, indicating that the galvanic replacement and Kirkendall effect across the alloying process are well controlled. Among the as-developed various Pd-Cu nanocrystals, the porous nanodendrites with both dendritic and hollow features show superior electrocatalytic activity toward formic acid oxidation. Comprehensive characterizations including three-dimensional simulated reconstruction of a single particle and high-resolution transmission electron microscopy reveal that the surface steps, defects, three-dimensional architecture, and the electronic/strain effects between Cu and Pd are responsible for the outstanding catalytic activity and excellent stability of the Pd-Cu porous nanodendrites.

Palladium-modified cuprous(i) oxide with {100} facets for photocatalytic CO2 reduction

Using metal as a photohole capturer can promote the photoelectron of p-type copper(i) oxide (Cu₂O) substrate for efficient carbon dioxide reduction. However, palladium-decorated Cu₂O (Cu₂O-Pd) is seldom reported due to their mismatching band arrangement. Herein, we have successfully established a matched band alignment between Pd nanoparticles and Cu₂O with exposed {100} facets (100Cu₂O). The high work function of 100Cu₂O originating from T_1u symmetry vibration facilitates the photohole transferring to Pd nanoparticles, which leads to a three-fold increase in the photocatalytic generation of carbon monoxide (100Cu₂O-0.1Pd, 0.13 μmol g^-1 h^-1) than that with pristine 100Cu₂O (0.04 μmol g^-1 h^-1). Besides, the incorporation of Pd can relieve the photocorrosion of 100Cu₂O, thus promoting its photocatalytic stability. As a contrast, 111Cu₂O (Cu₂O exposed to {111} facets) with low-work function was also synthesized and no charge migration was observed between 111Cu₂O and Pd species, which verified the important role of the crystal surface regulation. All experimental phenomena were certified by the crystal surface analysis and energy band structure construction. Moreover, CO₂ adsorption capacity tests indicated that the incorporation of Pd is beneficial for the capture of CO₂ molecules. We hope that this work to some extent will enrich the subject of photocatalytic CO₂ reduction.

Non-enzymatic electrochemical glucose sensing by Cu2O octahedrons: elucidating the protein adsorption signature

Developing an electrochemical biosensor based on Cu₂O octahedrons for rapid, sensitive and highly selective detection of glucose in real samples with an unprecedented analysis of their protein adsorption signature.

Temperature-dependent crystallization of Cu2O rhombic dodecahedra

Size and shape uniformity of nanomaterials are extremely important for their applications in batteries, supercapacitors, catalysis, etc.

Enhanced photocatalytic degradation of tetracycline by constructing a controllable Cu2O–TiO2 heterojunction with specific crystal facets

Type II heterojunction of 100Cu2O–TiO2 exhibits enhanced photodegradation rate of TC at the sacrifice of absolute decomposition, while 111Cu2O–TiO2 Z-scheme heterojunction displays simultaneous increased degradation rate and profound decomposition.

Rapid synthesis of Cu2O hollow spheres at low temperature and their catalytic performance for the decomposition of ammonium perchlorate

A simple and efficient strategy for synthesizing high-performance crystalline catalyst Cu2O hollow spheres with a large specific surface area was demonstrated.

Toward Informed Design of Nanomaterials: A Mechanistic Analysis of Structure-Property-Function Relationships for Faceted Nanoscale Metal Oxides

Nanoscale metal oxides (NMOs) have found wide-scale applicability in a variety of environmental fields, particularly catalysis, gas sensing, and sorption. Facet engineering, or controlled exposure of a particular crystal plane, has been established as an advantageous approach to enabling enhanced functionality of NMOs. However, the underlying mechanisms that give rise to this improved performance are often not systematically examined, leading to an insufficient understanding of NMO facet reactivity. This critical review details the unique electronic and structural characteristics of commonly studied NMO facets and further correlates these characteristics to the principal mechanisms that govern performance in various catalytic, gas sensing, and contaminant removal applications. General trends of facet-dependent behavior are established for each of the NMO compositions, and selected case studies for extensions of facet-dependent behavior, such as mixed metals, mixed-metal oxides, and mixed facets, are discussed. Key conclusions about facet reactivity, confounding variables that tend to obfuscate them, and opportunities to deepen structure-property-function understanding are detailed to encourage rational, informed design of NMOs for the intended application.

Co-Catalytic Action of Faceted Non-Noble Metal Deposits on Titania Photocatalyst for Multielectron Oxygen Reduction

In order to clarify the reason of often reported low photocatalytic activity of rutile titania compared to that of anatase titania and the sluggish kinetics for oxygen reduction of rutile titania, in this study, faceted copper(I) oxide (Cu2O) particles (FCPs), i.e., cube, cuboctahedron and octahedron, were deposited onto rutile particles by an in-situ wet chemical method, and the co-catalytic action of FCPs was studied in the oxidative decomposition of acetic acid. The oxygen reduction reaction kinetics of bare and FCP-loaded titania samples in photodecomposition of organic compounds were investigated by light-intensity dependence measurement. FCPs serve as the specific sites (sink) which accumulate excited electrons to drive multielectron oxygen reduction reactions, as the counter reaction in photodecomposition of organic compounds by positive holes, which significantly improves the photocatalytic activity of rutile titania particles.

Cu2O as an emerging semiconductor in photocatalytic and photoelectrocatalytic treatment of water contaminated with organic substances: a review

A wide range of semiconductor photocatalysts have been used over the years in water treatment to eliminate toxic organic substances from wastewater. The quest for visible or solar light driven photocatalysts with striking merits such as wide range of applications, ease of preparation, tailored architecture that gives rise to improved performance, ability of dual existence as both p type or n type semiconductor, among others, presents copper(i) oxide as a promising photocatalyst. This paper reviews the recent applications of Cu2O in photocatalytic and photoelectrocatalytic treatment of water laden with organic pollutants such as dyes and pharmaceuticals. It covers the various modes of synthesis, morphologies and composites or heterostructures of Cu2O as found in the literature. Concluding remarks and future perspectives on the application of Cu2O are presented.

Recent advances in the removal of persistent organic pollutants (POPs) using multifunctional materials:a review

Persistent organic pollutants (POPs) have gained heightened attentions in recent years owing to their persistent property and hazard influence on wild life and human beings. Removal of POPs using varieties of multifunctional materials have shown a promising prospect compared with conventional treatments. Herein, three main categories, including thermal degradation, electrochemical remediation, as well as photocatalytic degradation with the use of diverse catalytic materials, especially the recently developed prominent ones were comprehensively reviewed. Kinetic analysis and underlying mechanism for various POPs degradation processes were addressed in detail. The review also systematically documented how catalytic performance was dramatically affected by the nature of the material itself, the structure of target pollutants, reaction conditions and treatment techniques. Moreover, the future challenges and prospects of POPs degradation by means of multiple multifunctional materials were outlined accordingly. Knowing this is of immense significance to enhance our understanding of POPs remediation procedures and promote the development of novel multifunctional materials.

Identification of the Miller indices of a crystallographic plane: a tutorial and a comprehensive review on fundamental theory, universal methods based on different case studies and matters needing attention

Micro-/nanostructures exposed with special crystallographic planes (surface or crystal facets) exhibit distinctive physicochemical properties because of their unique atomic arrangements, resulting in their widespread applications in the fields of catalysis, energy conversion, sensors, electrical devices and so on. Therefore, tremendous progress has been made in facet-dependent investigation of various micro-/nanocrystals over the past decades. However, a lot of beginners including undergraduate students as well as graduate students lack systematic knowledge and don't know how to identify the Miller indices of a crystallographic plane in the actual research process. So far, to the best of our knowledge, there is no specialized review article in this respect. Herein, we present a tutorial and a comprehensive review on the identification of the Miller indices of a crystallographic plane, including fundamental theory, universal methods based on different case studies, and matters needing attention. Hopefully, this tutorial review will be a beneficial theoretical and practical reference for beginners currently focusing on the controllable preparation and facet-dependent investigation of micro-/nanocrystals.

Facet-Specific Photocatalytic Activity Enhancement of Cu2O Polyhedra Functionalized with 4-Ethynylanaline Resulting from Band Structure Tuning

Cu₂O rhombic dodecahedra, octahedra, and cubes were densely modified with conjugated 4-ethynylaniline (4-EA) for facet-dependent photocatalytic activity examination. Infrared spectroscopy affirms bonding of the acetylenic group of 4-EA onto the surface copper atoms. The photocatalytically inactive Cu₂O cubes showed surprisingly high activity toward methyl orange photodegradation after 4-EA modification, while the already active Cu₂O rhombic dodecahedra and octahedra exhibited a photocatalytic activity enhancement. Electron, hole, and radical scavenger experiments prove that the photocatalytic charge transport processes have occurred in the functionalized Cu₂O cubes. Electrochemical impedance spectroscopy also indicates reduced charge transfer resistance of the functionalized Cu₂O crystals. A band diagram constructed from UV-vis spectral and Mott-Schottky measurements reveals significant band energy shifts in all Cu₂O samples after decorating with 4-EA. From density functional theory (DFT) calculations, a new band has emerged slightly above the valence band maximum within the band gap of Cu₂O, which has been found to originate from 4-EA through band-decomposed charge density analysis. The increased charge density localized on the 4-EA molecule and the smallest electron transition energy to reach the 4-EA-generated band are factors making {100}-bound Cu₂O cubes photocatalytically active. Proper molecular decoration represents a powerful approach to improving the photocatalytic efficiency of semiconductors.