Atomic- and Molecular-Level Design of Functional Metal-Organic Frameworks (MOFs) and Derivatives for Energy and Environmental Applications

Rational MOF Membrane Design for Gas Detection in Complex Environments

Metal-organic frameworks (MOFs) hold significant promise in the realm of gas sensing. However, current understanding of their sensing mechanisms remains limited. Furthermore, the large-scale fabrication of MOFs is hampered by their inadequate mechanical properties. These two challenges contribute to the sluggish development of MOF-based gas-sensing materials. In this review, the selection of metal ions and organic ligands for designing MOFs is first presented, deepening the understanding of the interactions between different metal ions/organic ligands and target gases. Subsequently, the typical interfacial synthesis strategies (gas-solid, gas-liquid, solid-liquid interfaces) are provided, highlighting the potential for constructing MOF membranes on superhydrophobic and/or superhydrophilic substrates. Then, a multi-scale structure design strategies is proposed, including multi-dimensional membrane design and heterogeneous membrane design, to improve sensing performance through enhanced interfacial mass transfer and specific gas sieving. This strategy is anticipated to augment the task-specific capabilities of MOF-based materials in complex environments. Finally, several key future research directions are outlined with the aim not only to further investigate the underlying sensing principles of MOF membranes but also to achieve efficient detection of target gases amidst interfering gases and elevated moisture levels.

Revolutionizing environmental cleanup: the evolution of MOFs as catalysts for pollution remediation

The global problem of ecological safety and public health necessitates, the development of new sustainable ideas for pollution remediation. In recent development, metal-organic frameworks (MOF) are the emerging technology with remarkable potential, which have been employed in environmental remediation. MOFs are networks that are created by the coordination of metals or polyanions with ligands and contain organic components that can be customized. The interesting features of MOFs are a large surface area, tuneable porosity, functional diversity, and high predictability of pollutant adsorption, catalysis, and degradation. It is a solid material that occupies a unique position in the war against environmental pollutants. One of the main benefits of MOFs is that they exhibit selective adsorption of a wide range of pollutants, including heavy metals, organics, greenhouse gases, water and soil. Only particles with the right combination of pore size and chemical composition will achieve this selectivity, derived from the high level of specificity. Besides, they possess high catalytic ability for the removal of pollutants by means of different methods such as photocatalysis, Fenton-like reactions, and oxidative degradation. By generating mobile active sites within the framework of MOFs, we can not only ensure high affinity for pollutants but also effective transformation of toxic chemicals into less harmful or even inert end products. However, the long-term stability of MOFs is becoming more important as eco-friendly parts are replaced with those that can be used repeatedly, and systems based on MOFs that can remove pollutants in more than one way are fabricated. MOFs can reduce waste production, energy consumption as compared to the other removal process. With its endless capacities, MOF technology brings a solution to the environmental cleansing problem, working as a flexible problem solver from one field to another. The investigation of MOF synthesis and principles will allow researchers to fully understand the potential of MOFs in environmental problem solving, making the world a better place for all of us.

Tailoring the Electrochemical Responses of MOF-74 Via Dual-Defect Engineering for Superior Energy Storage

Rationally designed defects in a crystal can confer unique properties. This study showcases a novel dual-defects engineering strategy to tailor the electrochemical response of metal-organic framework (MOF) materials used for electrochemical energy storage. Salicylic acid (SA) is identified as an effective modulator to control MOF-74 growth and induce structural defects, and cobalt cation doping is adopted for introducing a second type of defect. The resulting dual-defects engineered bimetallic MOF exhibits a discharging capacity of 218.6 mAh g-1, 4.4 times that of the pristine MOF-74, and significantly improved cycling stability. Moreover, the engineered MOF-74(Ni0.675Co0.325)-8//Zn aqueous battery shows top energy/power density performances for Ni-Zn batteries (266.5 Wh kg-1, 17.22 kW kg-1). Comprehensive investigations reveal that engineered defects modify the local coordination environment and promote the in situ electrochemical reconfiguration during operation to significantly boost the electrochemical activity. This work suggests that rational tailoring of the defects within the MOF crystal is an effective strategy to manipulate the coordination environment of the metal centers and the corresponding electrochemical reconfiguration for electrochemical applications.

Optical Phenomena in Molecule-Based Magnetic Materials

Since the last century, we have witnessed the development of molecular magnetism which deals with magnetic materials based on molecular species, i.e., organic radicals and metal complexes. Among them, the broadest attention was devoted to molecule-based ferro-/ferrimagnets, spin transition materials, including those exploring electron transfer, molecular nanomagnets, such as single-molecule magnets (SMMs), molecular qubits, and stimuli-responsive magnetic materials. Their physical properties open the application horizons in sensors, data storage, spintronics, and quantum computation. It was found that various optical phenomena, such as thermochromism, photoswitching of magnetic and optical characteristics, luminescence, nonlinear optical and chiroptical effects, as well as optical responsivity to external stimuli, can be implemented into molecule-based magnetic materials. Moreover, the fruitful interactions of these optical effects with magnetism in molecule-based materials can provide new physical cross-effects and multifunctionality, enriching the applications in optical, electronic, and magnetic devices. This Review aims to show the scope of optical phenomena generated in molecule-based magnetic materials, including the recent advances in such areas as high-temperature photomagnetism, optical thermometry utilizing SMMs, optical addressability of molecular qubits, magneto-chiral dichroism, and opto-magneto-electric multifunctionality. These findings are discussed in the context of the types of optical phenomena accessible for various classes of molecule-based magnetic materials.

Radical-Driven Crystal-Amorphous-Crystal Transition of a Metal-Organic Framework

Self-assembly-based structural transition has been explored for various applications, including molecular machines, sensors, and drug delivery. In this study, we developed new redox-active metal-organic frameworks (MOFs) called DGIST-10 series that comprise π-acidic 1,4,5,8-naphthalenediimide (NDI)-based ligands and Ni2+ ions, aiming to boost ligand-self-assembly-driven structural transition and study the involved mechanism. Notably, during the synthesis of the MOFs, a single-crystal-amorphous-single-crystal structural transition occurred within the MOFs upon radical formation, which was ascribed to the fact that radicals prefer spin-pairing or through-space electron delocalization by π-orbital overlap. The radical-formation-induced structural transitions were further confirmed by the postsynthetic solvothermal treatment of isolated nonradical MOF crystals. Notably, the transient amorphous phase without morphological disintegration was clearly observed, contributing to the seminal structural change of the MOF. We believe that this unprecedented structural transition triggered by the ligand self-assembly magnifies the structural flexibility and diversity of MOFs, which is one of the pivotal aspects of MOFs.

Zn-Leaching Induced Rapid Self-Reconstruction of NiFe-Layered Double Hydroxides for Boosted Oxygen Evolution Reaction

Optimizing the active centers through reconstruction is recognized as the key to construct high-performance oxygen evolution reaction (OER) catalysts. Herein, a simple and rapid in situ leaching strategy to promote the self-reconstruction of NiFe-layered double hydroxides (LDHs) catalysts is reported. The trace Zn dopants are introduced in advance by a facile and one-step hydrothermal method, followed by leaching over the electrochemical activation process, which can remarkably reduce the formation potential of NiFeOOH active centers to enable the deeper self-reconstruction for the formation of abundant highly active centers. Moreover, the self-restructured NiFeOOH-VZn cannot only significantly lower the dehydrogenation energy barrier for the transformation from Ni(OH)2 to NiOOH, but also decrease the free energy barrier of rate determining step for the *OH converted to *O through a deprotonation process, thus significantly boosting the OER behaviors. As a proof of concept, the obtained NiFeOOH-VZn catalyst just requires a low overpotential of 240 mV at 10 mA cm-2, and delivers robust stability at 50 mA cm-2 over 120 h, which outperforms the benchmark of noble metal RuO2 and those of most non-noble metal catalysts ever reported.

NiFe MOF modified BiVO4 photoanode with strong π-π conjugation enhances built-in electric field for boasting photoelectrochemical water oxidation

The photoelectrochemical (PEC) performance ofBiVO4 is limited by sluggish kinetics and poor stability. In this work, a novel high-performance BiVO4/NiFe MOF(BPDC) photoanode is constructed by loading NiFe MOF with biphenyl-4,4'-dicarboxylic acid (BPDC) as an organic ligand on BiVO4 by a simple one-step hydrothermal method. The XPS, OCP, UPS, and KPFM show that the enhanced π-π conjugation effect causes more electrons transfer from the BiVO4 to the MOFs and affects the magnitude of the work function, leading to a strong built-in electric field to drive carrier separation and migration. Therefore, the BiVO4/NiFe MOF(BPDC) has a strong hole extraction and carrier separation capability to enhance photoelectrochemical water oxidation and improve photostability. The BiVO4/NiFe MOF(BPDC) photoanode has an enhanced photocurrent density of 4.16 mA cm-2 at 1.23 VRHE, which is 4.33 times higher than that of the pure BiVO4 (0.96 mA cm-2) photoanode with a negative shift of 376 mV in the onset potential plot, exhibiting excellent photostability of 7 h at 1.23 VRHE. This work demonstrates that the composite photoanodes constructed by BiVO4 and the MOFs with strong π-π conjugation are promising, which provides an effective strategy for the preparation of efficient and stable photoanodes.

Advanced materials for smart protective coatings: Unleashing the potential of metal/covalent organic frameworks, 2D nanomaterials and carbonaceous structures

The detrimental impact of corrosion on metallic materials remains a pressing concern across industries. Recently, intelligent anti-corrosive coatings for safeguarding metal infrastructures have garnered significant interest. These coatings are equipped with micro/nano carriers that store corrosion inhibitors and release them when triggered by external stimuli. These advanced coatings have the capability to elevate the electrochemical impedance values of steel by 2-3 orders of magnitude compared to the blank coating. However, achieving intelligent, durable, and reliable anti-corrosive coatings requires careful consideration in the design of these micro/nano carriers. This review paper primarily focuses on investigating the corrosion inhibition mechanism of various nano/micro carriers/barriers and identifying the challenges associated with using them for achieving desired properties in anti-corrosive coatings. Furthermore, the fundamental aspects required for nano/micro carriers, including compatibility with the coating matrix, high specific surface area, stability in different environments, stimuli-responsive behavior, and facile synthesis were investigated. To achieve this aim, we explored the properties of micro/nanocarriers based on oxide nanoparticles, carbonaceous and two-dimensional (2D) nanomaterials. Finally, we reviewed recent literature on the application of state-of the art nanocarriers based on metal-organic frameworks (MOFs) and covalent-organic frameworks (COFs). We believe that the outcomes of this review paper offer valuable insights for researchers in selecting appropriate materials that can effectively enhance the corrosion resistance of coatings.

Visible-light-induced photocatalytic CO2 reduction over zirconium metal organic frameworks modified with different functional groups

The reduction of CO₂ into high value-added chemicals and fuels by a photocatalytic technology can relieve energy shortages and the environmental problems caused by greenhouse effects. In the current work, an amino-functionalized zirconium metal organic framework (Zr-MOF) was covalently modified with different functional groups via the condensation of Zr-MOF with 2-pyridinecarboxaldehyde (PA), salicylaldehyde (SA), benzaldehyde (BA), and trifluoroacetic acid (TA), named Zr-MOF-X (X = PA, SA, BA, and TA), respectively, through the post-synthesis modification. Compared with Zr-MOF and Zr-MOF-TA, the introduction of PA, SA, or BA into the framework of Zr-MOF can not only enhance the visible-light harvesting and CO₂ capture, but also accelerate the photogenerated charge separation and transfer, thereby improving the photocatalytic ability of Zr-MOF for CO₂ reduction. These results indicate that the modification of Zr-MOF with electron-donating groups can promote the photocatalytic CO₂ reduction. Therefore, the current work provides an instructive approach to improve the photocatalytic efficiency of CO₂ reduction through the covalent modification of MOFs.

Strategies to enhance the reactivity of zero-valent iron for environmental remediation: A review

Application of zero-valent iron (ZVI) has become one of the most promising innovative technologies for the remediation of environmental pollutants. However, ZVI may suffer from the low intrinsic reactivity toward refractory pollutants, which seriously restricts its practical application in fields. Therefore, strategies have been developing to enhance the reactivity of ZVI. Until now, the most commonly used strategies include pretreatment of ZVI, synthesis of highly-active ZVI-based materials and additional auxiliary measures. In this review, a systematic and comprehensive summary of these commonly used strategies has been conducted for the following purposes: (1) to understand the fundamental mechanisms of the selected approaches; (2) to point out their advantages and shortcomings; (3) to illustrate the main problems of their large-scale application; (4) to forecast the future trend of developing ZVI technologies. Overall, this review is devoted to providing a fundamental understanding on the mechanism for enhancing the reactivity of ZVI and facilitating the practical application of ZVI technologies in fields.

Shaping 90 wt% NanoMOFs into Robust Multifunctional Aerogels Using Tailored Bio-Based Nanofibrils

Metal-organic frameworks (MOFs) are hybrid porous crystalline networks with tunable chemical and structural properties. However, their excellent potential is limited in practical applications by their hard-to-shape powder form, making it challenging to assemble MOFs into macroscopic composites with mechanical integrity. While a binder matrix enables hybrid materials, such materials have a limited MOF content and thus limited functionality. To overcome this challenge, nanoMOFs are combined with tailored same-charge high-aspect-ratio cellulose nanofibrils (CNFs) to manufacture robust, wet-stable, and multifunctional MOF-based aerogels with 90 wt% nanoMOF loading. The porous aerogel architectures show excellent potential for practical applications such as efficient water purification, CO₂ and CH₄ gas adsorption and separation, and fire-safe insulation. Moreover, a one-step carbonization process enables these aerogels as effective structural energy-storage electrodes. This work exhibits the unique ability of high-aspect-ratio CNFs to bind large amounts of nanoMOFs in structured materials with outstanding mechanical integrity-a quality that is preserved even after carbonization. The demonstrated process is simple and fully discloses the intrinsic potential of the nanoMOFs, resulting in synergetic properties not found in the components alone, thus paving the way for MOFs in macroscopic multifunctional composites.

Core-Shell Carbon-Based Bifunctional Electrocatalysts Derived from COF@MOF Hybrid for Advanced Rechargeable Zn-Air Batteries

The development of highly active carbon-based bifunctional electrocatalysts for both the oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) is highly desired, but still full of challenges in rechargeable Zn-air batteries. Metal organic frameworks (MOFs) and covalent organic frameworks (COFs) have gained great attention for various applications due to their attractive features of structural tunability, high surface area and high porosity. Herein, a core-shell structured carbon-based hybrid electrocatalyst (H-NSC@Co/NSC), which contains high density active sites of MOF-derived shell (Co/NSC) and COF-derived hollow core (H-NSC), is successfully fabricated by direct pyrolysis of covalently-connected COF@ZIF-67 hybrid. The core-shell H-NSC@Co/NSC hybrid manifests excellent catalytic properties toward both OER and ORR with a small potential gap (∆E = 0.75 V). The H-NSC@Co/NSC assembled Zn-air battery exhibits a high power-density of 204.3 mW cm^-2 and stable rechargeability, outperforming that of Pt/C+RuO₂ assembled Zn-air battery. Density functional theory calculations reveal that the electronic structure of the carbon frameworks on the Co/NSC shell can be effectively modulated by the embedded Co nanoparticles (NPs), facilitating the adsorption of oxygen intermediates and leading to enhanced catalytic activity. This work will provide a strategy to design highly-efficient electrocatalysts for application in energy conversion and storage.

The Chemistry and Applications of Metal-Organic Frameworks (MOFs) as Industrial Enzyme Immobilization Systems

Enzymatic biocatalysis is a sustainable technology. Enzymes are versatile and highly efficient biocatalysts, and have been widely employed due to their biodegradable nature. However, because the three-dimensional structure of these enzymes is predominantly maintained by weaker non-covalent interactions, external conditions, such as temperature and pH variations, as well as the presence of chemical compounds, can modify or even neutralize their biological activity. The enablement of this category of processes is the result of the several advances in the areas of molecular biology and biotechnology achieved over the past two decades. In this scenario, metal–organic frameworks (MOFs) are highlighted as efficient supports for enzyme immobilization. They can be used to ‘house’ a specific enzyme, providing it with protection from environmental influences. This review discusses MOFs as structures; emphasizes their synthesis strategies, properties, and applications; explores the existing methods of using immobilization processes of various enzymes; and lists their possible chemical modifications and combinations with other compounds to formulate the ideal supports for a given application.

Transformation of metal-organic frameworks with retained networks

Metal-organic frameworks (MOFs) are a class of crystalline porous coordination materials with systematically designable network structures and tunable properties, demonstrating great potential for applications in diverse fields. However, the generally poor stability of dynamic coordination bonds in MOFs hinders their practical applications in harsh environments. Although MOFs have been used as precursors and templates for the production of various derivatives with enhanced stability via thermal treatment, the extreme thermolytic conditions often destroy the network structures, consequently resulting in obvious decreases in porosity and surface areas with undesired characteristics. This feature article discusses the generally used pathways for the transformation of MOFs and the advanced fabrication methods for the production of various MOF-derived materials. We particularly emphasize the recent progress in the designed strategies for customization and derivation tailoring of MOFs, which could produce MOF-derived functional materials with remaining framework skeletons and inherited characteristics (surface area, porosity and properties) of the parent MOFs, exhibiting great promise for practical applications.

Advanced MOFs@aerogel composites: Construction and application towards environmental remediation

Environmental pollution has drawn forth advanced materials and progressive techniques concentrating on sustainable development. Metal-organic frameworks (MOFs) have aroused vast interest resulting from their excellent property in structure and function. Conversely, powdery MOFs in highly crystalline follow with fragility, poor processability and recoverability. Aerogels distinguished by the unique three-dimensional (3D) interconnected pore structures with high porosity and accessible surface area are promising carriers for MOFs. Given these, combining MOFs with aerogels at molecule level to obtain advanced composites is excepted to further enhance their performance with higher practicability. Herein, we focus on the latest studies on the MOFs@aerogel composites. The construction of MOFs@aerogel with different synthetic routes and drying methods are discussed. To explore the connection between structure and performance, pore structure engineering and quantitation of MOFs content are outlined. Furthermore, various types of MOFs@aerogel composites and their carbonized derivatives are reviewed, as well as the applications of MOFs@aerogel for environmental remediation referring to water purification and air clearing. More importantly, outlooks towards these emerging advanced composites have been presented from the perspective of practical application and future development.

Strategic combination of metal-organic frameworks and C3N4 for expeditious photocatalytic degradation of dye pollutants

The potential of fabricated silver and bismuth Co-N-doped imidazolate embedded into graphitic nitride BiO-Ag(0)/C₃N₄@ZIF-67 for the degradation of Methylene blue (MB) and Congo red (CR) dyes have been reported. The synthesized materials were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy photoluminescence (PL) spectroscopy, and electrochemical impedance spectroscopy (EIS). The band gaps of ZIF-67, C₃N₄ and composites were calculated using Tauc plot. Besides, it was revealed that incorporation of silver, bismuth, and C₃N₄ reduced the band gap energy to 2.2 eV. The introduction of metallic species in the precursors promoted better charge separation behavior towards photogenerated electron and hole in the heterojunction composite. Two perilous organic dyes; MB and CR were degraded under natural sunlight irradiation. The photocatalytic efficiency of BiO-Ag(0)/C₃N₄@ZIF-67 for the removal of CR and MB significantly increased compared to bare ZIF-67. The enhanced photocatalytic activity of BiO-Ag(0)/C₃N₄@ZIF-67 is attributed to the higher surface area and Plasmon effect of noble silver metal. The solar light-triggered degradation of MB and CR yielded efficient efficiency of 96.5 and 90% for 10 mg/L of dye solution each. Additionally, the effect of pH was evaluated for optimizing degradation of CR and MB dyes. The kinetics studies of both CR and MB were clarified according to Langmuir model. The reusability and quenching investigation of active species were carried out to discover find catalytic potential of the composite. Besides, possible dye degradation mechanism was proposed for BiO-Ag(0)/C₃N₄@ZIF-67. The obtained results indicated that solar-light triggered photocatalyst BiO-Ag(0)/C₃N₄@ZIF-67 can be employed as a promising approach for photocatalytic elimination of organic pollutants.

Nanoemulsion-directed growth of MOFs with versatile architectures for the heterogeneous regeneration of coenzymes

As one of the most appealing strategies for the synthesis of nanomaterials with various architectures, emulsion-directed methods have been rarely used to control the structure of metal-organic frameworks (MOFs). Herein, we report a versatile salt-assisted nanoemulsion-guided assembly to achieve continuous architecture transition of hierarchical Zr-based MOFs. The morphology of nanoemulsion can be facilely regulated by tuning the feed ratio of a dual-surfactant and the introduced amount of compatible hydrophobic compounds, which directs the assembly of MOFs with various architectures such as bowl-like mesoporous particle, dendritic nanospheres, walnut-shaped particles, crumpled nanosheets and nanodisks. The developed dendritic nanospheres with highly open and large mesochannels is successfully used as matrix for the co-immobilization of coenzymes and corresponding enzymes to realize the in situ heterogeneous regeneration of NAD⁺. This strategy is expected to pave a way for exploring sophisticated hierarchical MOFs which can be competent for practical applications with bulk molecules involved.

Controlling the structure of hierarchical metal-organic frameworks via soft template remains a challenge. Here, the authors report a salt-assisted nanoemulsion-guided strategy to achieve continuous structure transition of hierarchical Zr-based MOFs.

Layered FeCoNi double hydroxides with tailored surface electronic configurations induced by oxygen and unsaturated metal vacancies for boosting the overall water splitting process

Two-dimensional (2D) layered double hydroxides (LDH) with excellent hydrophilic ability and rapid hydroxyl insertion are regarded as one of the most promising electrocatalysts for both the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) for overall water splitting to produce hydrogen. However, the electrocatalytic HER/OER activities can be restricted by the inert basal plane due to the poor conductivity, deficient active sites and inferior durability despite there being efficient active sites in the material edge. Thus, capturing many more exposed reactive sites to facilitate the rapid reaction kinetics is a crucial strategy. In this paper, both oxygen and unsaturated metal vacancies with FeCoNi LDH materials are generated through a surface activation approach by pre-covering of fluoride and a post-boronizing process. Such a material is grown on Ni foam to form an F-FeCoNi-Ov LDH/NF electrocatalyst. The activated surface of the electrocatalyst with oxygen vacancies and unsaturated metal sites shows enhanced electroconductivity for regulating the surface electronic structure and optimizing the surface adsorption energy for intermediates during HER/OER processes. As a result, this electrocatalyst exhibits excellent electrocatalytic performance for both the HER and OER with low overpotentials, small Tafel slopes and long durability. The enhancement mechanism is also studied deeply for fundamental understanding. For performance validation, an F-FeCoNi-Ov LDH/NF∥F-FeCoNi-Ov LDH/NF water splitting cell is fabricated and needs only 1.54 V and 1.81 V to reach current densities of 10 and 100 mA cm^-2, respectively. This work provides a practicable strategy to develop 2D LDH nanomaterials with boosted electrocatalytic activity for sustainable and clean energy storage systems.

Enhanced photocatalytic activity of TiO2/UiO-67 under visible-light for aflatoxin B1 degradation

TiO2 has great potential in photocatalytic degradation of organic pollutants, but poor visible light response and low separation efficiency of photogenerated electron-hole pairs limit its wide applications. In this study, we have successfully prepared TiO2/UiO-67 photocatalyst through an in situ solvothermal method. The degradation rate of aflatoxin B1 (AFB1) is 98.9% in only 80 min, which is superior to the commercial P25, commercial TiO2 and most of reported photocatalysts under visible light irradiation. In addition, the TiO2/UiO-67 photocatalyst showed excellent recyclability. We demonstrated that the enhanced photocatalytic mechanism was owing to the heterojunction between TiO2 and UiO-67, which enhanced effectively the separation photogenerated charge carriers and visible light response. The free radical trapping tests demonstrated that superoxide radicals (˙O2 -), holes (h+) and hydroxyl radicals (˙OH) were the main active species and then oxidized AFB1 to some small molecules.

A new rapid synthesis of hexagonal prism Zn-MOF as a precursor at room temperature for energy storage through pre-ionization strategy

In this paper, a new hexagonal prismatic Zn-MOF is rapidly synthesized at room temperature through a one-step precipitation method as precursor for the preparation of porous carbon. The SEM and GCD tests indicate that the pre-ionization process of BTC greatly accelerates the reaction speed between BTC and Zn ions, and only 0.5 h is required for the preparation of Zn-MOF with orderly morphology at room temperature, far less than 3-24 h of the existing hydrothermal synthesis. The derived porous carbon (BTCC) is provided with a considerable specific surface area of 1,464 m² g^-1 and suitable pores of 3.9 nm in size. Its richly porous structure offers a superior supercapacitor performance. The BTCC electrode offered a high specific capacitance and an excellent cycle stability. Furthermore, the assembled two symmetrical supercapacitors, C|1 M Na₂SO₄|C and C|6 M KOH|C, provide high energy density of 22.4 Wh kg^-1 and 13.7 Wh kg^-1, respectively. Their energy retention rates were 80.0% and 89.4%, respectively after 10,000 cycles at 20 A g^-1. The proposed pre-ionization strategy is a facile, convenient and easy-to-industrial method for the preparation of new MOFs, thereby significantly reducing the manufacturing cost of porous carbon for energy storage.

Enhanced Atmospheric Water Harvesting with Sunlight-Activated Sorption Ratcheting

The global challenge of clean water scarcity needs to be confronted with novel sustainable, climate neutral solutions, over the entire spectrum of possible clean water availability. Atmospheric moisture represents a major untapped resource that can be harvested by sorbents, enabling water production in dry inland regions where it is needed. While benefiting from the utilization of an important renewable energy source, solar-driven, sorbent-based atmospheric water harvesting systems are inseparably based on a single water harvesting cycle per day, which severely limits the daily water productivity and the competitiveness of this very promising technology. Here, we rationally design an atmospheric water harvesting strategy, using durable hydrogel sorbents, that operates with sorption "ratcheting"─a large sequence of rapid adsorption and subsequent desorption steps─activated by direct sunlight. Employing theoretical considerations, we tailor the ratcheting timescales to the inherent sorption properties of the hydrogels, optimally exploiting their natural harvesting capabilities, while maintaining the sustainable utility of the daily cycle. Amplified by the favorable sorption properties and ratcheting stability of the sorbent, this strategy demonstrates an impressive ∼80% increase in water harvesting yield over the daily cycle systems. The generic nature of the ratcheting concept shows great potential to advance the water harvesting capabilities of a range of related systems.

Efficient H2 evolution on Co3S4/Zn0.5Cd0.5S nanocomposite by photocatalytic synergistic reaction

To achieve high photocatalytic efficiency of H2 evolution, promoting the utilization rate of photogenerated charge carriers by photocatalytic synergistic reaction is an efficient strategy. In this work, Co3S4/Zn0.5Cd0.5S nanocomposites with...

Cobalt based Bi-functional Metal Organic Framework mediated Fluorescent Bio-sensing System for Hypersensitive Detection of Ag+ Ions through Catalytic Hairpin Assembly

Silver is often used as a water disinfectant in healthcare institutions as well as in potable water purifiers. Even though there are no strict regulations regarding the amount of silver...

Dual-functional 3D carbon fibers decorated with Co nanoparticles and Co-Nx sites for rechargeable aprotic Li–O2 batteries

Due to the function of the Co/CNF-750 fibrous skeleton in the concurrent management of cathode optimization and dendrite inhibition, Co/CNF-750-based Li–O2 full batteries can achieve a life of 160 cycles at 200 mA g-1.

Precursor-converted formation of bimetallic–organic framework nanosheets for efficient oxygen evolution reaction

A precursor-converted method is adopted to synthesize 2D NiFe-MOF nanosheets from NiFe-LDH, which demonstrates excellent catalytic OER performance.

Application of a novel biomimetic double-ligand zirconium-based metal organic framework in environmental restoration and energy conversion

The development of visible-light response photocatalysts with a high catalytic performance and long-term cyclic stability is of great significance in the field of energy and environmental protection. Inspired by photosynthesis, a novel three-dimensional coral zirconium-based metal organic framework (MOF) was synthesized using a double-ligand strategy. The optimal sample, Zr-TCPP-bpydc (2:1), (the ratio of tetra-(4-carboxyphenyl) porphyrin to 2,2'-bipyridine-5,5'-dicarboxylic acid is 2:1) shows an excellent photocatalytic activity under visible light irradiation, and the effects of the amount of photocatalyst, pH and concentration on the degradation rate were investigated under the optimum conditions. It has a high degradation rate of tetracycline (98.12% for tetracycline and 96.74% for ofloxacin), which is 2.11 times higher than that of single ligand Zr-bpydc (zirconium-based MOF containing only 2,2'-bipyridine-5,5'-dicarboxylic acid). More importantly, it also has a good H₂ evolution rate (213.68 μmol g^-1h^-1) and CO₂ reduction (35.81 μmol g^-1h^-1). In addition, the intermediate pathway of degradation, photocatalytic enhancement mechanism and cycle stability were deeply studied by liquid chromatography-mass spectrometry (LC-MS), electron spin resonance spectroscopy (ESR), linear sweep voltammetry (LSV) and recycling tests. The synthesis of a three-dimensional biomimetic coral zirconium-based MOF material will provide guidance for the development of new, promising, and natural ideal photocatalytic materials.

Photosensitizer-based metal-organic frameworks for highly effective photodynamic therapy

Photodynamic therapy (PDT) uses a photosensitizer, molecular oxygen, and visible light as an alternative clinical protocol against located malignant tumors and other diseases. More recently, PDT has been combined to immunotherapy as a promising option to treat metastatic cancer. However, previous generations of photosensitizers (PSs) revealed clinical difficulties such as long-term skin photosensitivity (first generation), the need for drug delivery vehicles (second generation), and intracellular self-aggregation (third generation), which have generated a somewhat confusing scenario in PDT approaches and evolution. Recently, metal-organic frameworks (MOFs) with exceptionally high PS loading as a building unit of MOF framework have emerged as fourth-generation PS and presented outstanding outcomes under pre-clinical studies. For PS-based MOFs, the inorganic building unit (metal ions/clusters) plays an important role as a coadjuvant in PDT to alleviate hypoxia, to decrease antioxidant species, to yield ROS, or to act as a contrast agent for imaging-guided therapy. In this review, we intend to carry out a broad update on the recent history and the characteristics of PS-based MOFs from basic chemistry to the structure relationship with biological application in PDT. The details and variables that result in different photophysics, size, and morphology, are discussed. Also, we present an overview of the achievements on the pre-clinical assays in combination with other strategies, including alleviating hypoxia in solid tumors, chemotherapy, and the most recent immunotherapy for cancer.

Advances and Prospects in Metal-Organic Frameworks as Key Nexus for Chemocatalytic Hydrogen Production

Hydrogen is a clean and sustainable energy carrier, which is considered a promising alternative for fossil fuels to solve the global energy crisis and respond to climate change. Social concerns on its safe storage promote continuous exploration of alternatives to traditional storage methods. In this case, chemical hydrogen storage materials initiate plentiful research with special attention to the design of heterogeneous catalysts that can enhance efficient and highly selective hydrogen production. Metal-organic frameworks (MOFs), a kind of unique crystalline porous materials featuring highly ordered porosities and tailorable structures, can provide various active sites (i.e., metal nodes, functional linkers, and defects) for heterogeneous catalysis. Furthermore, the easy construction of active sites in highly ordered MOFs, which can work as plate for the delicate active site engineering, make them ideal candidates for a variety of heterogeneous catalysts including chemocatalytic hydrogen production. This review concentrates on the application of MOFs as heterogeneous catalysts or catalyst supports in chemocatalytic hydrogen production. Recent progresses of MOFs as catalysts for chemocatalytic hydrogen production are comprehensively summarized. The research methods, mechanism analyses, and prospects of MOFs in this field are discussed. The challenges in future industrial applications of MOFs as catalysts for hydrogen production are proposed.

Steric effects in the hydrogen evolution reaction based on the TMX4 active center: Fe-BHT as a case study

In this work, Fe-BHT is identified as the most efficient catalyst for the hydrogen evolution reaction (HER) among the TM-BHTs (TM = Sc, Ti, V, Cr, Mn, Fe, Co, and Ni), with an overpotential as low as 0.09 V. It is found that Fe d_z² orbitals do not participate in the bonding with surrounding S/N atoms in the FeX₄ active center but are bonding states for hydrogen adsorption. In accordance with our results, a steric effect determined energy gap acts as an efficient descriptor for the HER activity, which has never been discussed in previous studies. In addition, strain engineering proves the proposed steric effects, which also highlights the importance of the point group symmetry of active centers.

Metal-Triazolate-Framework-Derived FeN4 Cl1 Single-Atom Catalysts with Hierarchical Porosity for the Oxygen Reduction Reaction

The construction of single-atom catalysts (SACs) with high single atom densities, favorable electronic structures and fast mass transfer is highly desired. We have utilized metal-triazolate (MET) frameworks, a subclass of metal-organic frameworks (MOFs) with high N content, as precursors since they can enhance the density and regulate the electronic structure of single-atom sites, as well as generate abundant mesopores simultaneously. Fe single atoms dispersed in a hierarchically porous N-doped carbon matrix with high metal content (2.78 wt %) and a FeN₄ Cl₁ configuration (FeN₄ Cl₁ /NC), as well as mesopores with a pore:volume ratio of 0.92, were obtained via the pyrolysis of a Zn/Fe-bimetallic MET modified with 4,5-dichloroimidazole. FeN₄ Cl₁ /NC exhibits excellent oxygen reduction reaction (ORR) activity in both alkaline and acidic electrolytes. Density functional theory calculations confirm that Cl can optimize the adsorption free energy of Fe sites to *OH, thereby promoting the ORR process. The catalyst demonstrates great potential in zinc-air batteries. This strategy selects, designs, and adjusts MOFs as precursors for high-performance SACs.

Double-Layer Nitrogen-Rich Two-Dimensional Anionic Uranyl-Organic Framework for Cation Dye Capture and Catalytic Fixation of Carbon Dioxide

A novel two-dimensional double-layer anionic uranyl-organic framework, U-TBPCA {[NH₂(CH₃)₂][(UO₂)(TBPCA)], where H₃TBPCA = 4,4',4″-s-triazine-1,3,5-triyltripamino-methylene-cyclohexane-carboxylate}, with abundant active sites and stability was obtained by assembling UO₂(NO₃)₂·6H₂O and a triazine tricarboxylate linker, TBPCA^3-. Due to the flexibility of the ligand and diverse coordination modes between carboxyl groups and uranyl ions, U-TBPCA exhibits an intriguing topological structure and steric configuration. This double-layer anionic uranyl-organic framework is highly porous and can be used for selective adsorption of cationic dyes. Due to the presence of high-density metal ions and basic -NH- groups, U-TBPCA acts as an effective heterogeneous catalyst for the cycloaddition reaction of carbon dioxide with epoxy compounds. Moreover, the various modes of coordination between the tricarboxylic ligand and uranyl ion were studied by density functional theory calculations, and several simplified models were established to probe the influence of hydrogen bonding between carbon dioxide and U-TBPCA on the ability of U-TBPCA to bind carbon dioxide. This work should aid in improving our understanding of the coordination behavior of uranyl ion as well as the development and utilization of new actinide materials.

Metal-Organic Fragments with Adhesive Excipient and Their Utilization to Stabilize Multimetallic Electrocatalysts for High Activity and Robust Durability in Oxygen Evolution Reaction

Multimetallic electrocatalysts have shown great potential to improve electrocatalytic performance, but their deteriorations in activity and durability are yet to be overcome. Here, metal-organic fragments with adhesive excipient to realize high activity with good durability in oxygen evolution reaction (OER) are developed. First, a leaf-like zeolitic-imidazolate framework (ZIF-L) is synthesized. Then, ionized species in hydrogen plasma attack preferentially the organic linkers of ZIF-L to derive cobalt-imidazole fragments (CIFs) as adhesive excipient, while they are designed to retain the coordinated cobalt nodes. Moreover, the vacant coordination sites at cobalt nodes and the unbound nitrogen at organic linkers induce high porosity and conductivity. The CIFs serve to stably impregnate trimetallic FeNiMo electrocatalysts (CIF:FeNiMo), and CIF:FeNiMo containing Fe contents of 22% and hexavalent Mo contents show to enable high activity with low overpotentials (203 mV at 10 mA cm-2 and 238 mV at 100 mA cm-2 ) in OER. The near O K-edge extended X-ray absorption fine structure proves further that high activity for OER originates from the partially filled eg orbitals. Additionally, CIF:FeNiMo exhibit good durability, as demonstrated by high activity retention during at least 45 days in OER.

Conjugated π Electrons of MOFs Drive Charge Separation at Heterostructures Interface for Enhanced Photoelectrochemical Water Oxidation

Photoanode material with high efficiency and stability is extensively desirable in photoelectrochemical (PEC) water splitting for green/renewable energy source. Herein, novel heterostructures is constructed via coating rutile TiO₂ nanorods with metal organic framework (MOF) materials UiO-66 or UiO-67 (UiO-66@TiO₂ and UiO-67@TiO₂ ), respectively. The π electrons in the MOF linkers could increase the local electronegativity near the heterojunction interface due to the conjugation effect, thereby enhancing the internal electric field (IEF) at the heterojunction interface. The IEF could drive charge transfer following Z-scheme mechanism in the prepared heterostructures, inducing photogenerated charge separation efficiency increasing as 156% and 253% for the UiO-66@TiO₂ and UiO-67@TiO₂ , respectively. Correspondingly, the UiO-66@TiO₂ and UiO-67@TiO₂ enhanced the photocurrent density as approximate two- and threefolds compared with that of pristine TiO₂ for PEC water oxidation in universal pH electrolytes. This work demonstrates an effective method of regulating the IEF of heterojunction toward further improved charge separation.

Facilely controllable synthesis of copper-benzothiadiazole complexes via solvothermal reactions: exploring the customized synthetic approach by experiments

It is very challenging to transform small organic molecules into customized coordination polymer (CP) because the functionalities with desired properties are greatly influenced by several elements, including the assembly modes of the organic linkers and metal nodes, organic linker functionalization, and defects. Therefore, deep cognition for the molecular-level engineering of CP chemistry is very important. Herein, we obtained five new copper-benzothiadiazole complexes via a controllable synthesis approach: [CuII(L1)(CH3CN)]2 (C1), [CuIBr(L1)]n (C2), [CuI3Br3(L2)2]n (C3), [CuICl(L3)]2 (C4), and [CuIICl2(L3)2] (C5). In the exploration, we successfully modulated the structure of the organic linker and the valence state of the metal nodes as well as the assembly modes of the organic linkers and metal nodes through the facilely controllable solvothermal reaction. The results from our experiments also indicated that the fusing process was driven by a CuII/CuI catalytic cycle. In this pathway, oxygen is the final electron acceptor and the solvent DMSO acts as a co-oxidant. In C2 and C3, the ever-expanding macrocycles were constructed from CuX clusters and organic chromophore linkers, forming interesting 1D chain structures, while the supramolecular macrocycles were assembled through hydrogen bonding expanding to a 3D network of C5. Interestingly, C1-C4 exhibit chromophore-based fluorescence, but are not phosphorescence.

Single-Atom and Dual-Atom Electrocatalysts Derived from Metal Organic Frameworks: Current Progress and Perspectives

Single-atom catalysts (SACs) have attracted increasing research interests owing to their unique electronic structures, quantum size effects and maximum utilization rate of atoms. Metal organic frameworks (MOFs) are good candidates to prepare SACs owing to the atomically dispersed metal nodes in MOFs and abundant N and C species to stabilize the single atoms. In addition, the distance of adjacent metal atoms can be turned by adjusting the size of ligands and adding volatile metal centers to promote the formation of isolated metal atoms. Moreover, the diverse metal centers in MOFs can promote the preparation of dual-atom catalysts (DACs) to improve the metal loading and optimize the electronic structures of the catalysts. The applications of MOFs derived SACs and DACs for electrocatalysis, including oxygen reduction reaction, oxygen evolution reaction, hydrogen evolution reaction, carbon dioxide reduction reaction and nitrogen reduction reaction are systematically summarized in this Review. The corresponding synthesis strategies, atomic structures and electrocatalytic performances of the catalysts are discussed to provide a deep understanding of MOFs-based atomic electrocatalysts. The catalytic mechanisms of the catalysts are presented, and the crucial challenges and perspectives are proposed to promote further design and applications of atomic electrocatalysts.

Metal-Organic Layers for Electrocatalysis and Photocatalysis

Metal-organic layers (MOLs) are two-dimensional analogues of metal-organic frameworks (MOFs) with a high aspect ratio and thickness down to a monolayer. Active sites on MOLs are more accessible than those on MOFs thanks to the two-dimensional feature of MOLs, which allows easier chemical modification around the catalytic center. MOLs can also be assembled with other functional materials through surface anchoring sites that can facilitate charge/energy transport through the hybrid material. MOLs are thus quite suitable for interfacial catalysis like electrocatalysis and photocatalysis. In this outlook, we focus on representative progress of constructing unique interfacial sites on MOLs with designer paths for charge separation and energy transfer, as well as cooperative cavities for superior substrate adsorption and activation. We also discuss challenges and potentials in the future development of MOL catalysts and catalysts beyond MOLs.