Advanced Switchable Molecules and Materials for Oil Recovery and Oily Waste Cleanup

Biofabrication with microbial cellulose: from bioadaptive designs to living materials

Nanocellulose is not only a renewable material but also brings functions that are opening new technological opportunities. Here we discuss a special subset of this material, in its fibrillated form, which is produced by aerobic microorganisms, namely, bacterial nanocellulose (BNC). BNC offers distinct advantages over plant-derived counterparts, including high purity and high degree of polymerization as well as crystallinity, strength, and water-holding capacity, among others. More remarkably, beyond classical fermentative protocols, it is possible to grow BNC on non-planar interfaces, opening new possibilities in the assembly of advanced bottom-up structures. In this review, we discuss the recent advances in the area of BNC-based biofabrication of three-dimensional (3D) designs by following solid- and soft-material templating. These methods are shown as suitable platforms to achieve bioadaptive constructs comprising highly interlocked biofilms that can be tailored with precise control over nanoscale morphological features. BNC-based biofabrication opens applications that are not possible by using traditional manufacturing routes, including direct ink writing of hydrogels. This review emphasizes the critical contributions of microbiology, colloid and surface science, as well as additive manufacturing in achieving bioadaptive designs from living matter. The future impact of BNC biofabrication is expected to take advantage of material and energy integration, residue utilization, circularity and social latitudes. Leveraging existing infrastructure, the scaleup of biofabrication routes will contribute to a new generation of advanced materials rooted in exciting synergies that combine biology, chemistry, engineering and material sciences.

Interfacial behaviour of short-chain fluorocarbon surfactants at the n-hexane/water interface: a molecular dynamics study

The utilization of long-chain fluorocarbon surfactants is restricted due to environmental regulations, prompting a shift in the focus of research towards short-chain fluorocarbon surfactants. The present study employs molecular dynamics techniques to model the behaviour of potassium perfluorobutylsulfonate (PFBS) at the n-hexane/water interface, aiming to investigate the efficacy of short-chain fluorocarbon surfactants in enhancing oil recovery. The findings suggest that ionized PFBS- has the ability to autonomously migrate to the oil/water interface, forming a layered thin film, with the sulfonic acid group being submerged in water, while the fluorocarbon chain is oriented towards the oil phase. This phenomenon aligns with the fundamental concept of surfactants in reducing interfacial tension between oil and water. The spontaneous dispersion process is supported by changes in the number of water molecules surrounding each PFBS- anion, as is well indicated by the number density distribution within the simulation box. Based on the analysis conducted by IGMH (Independent Gradient Model based on Hirshfeld partition), it was determined that sulfonic acid molecules are capable of forming hydrogen bonds with water molecules, whereas the interaction between fluorocarbon chains and the oil phase is predominantly characterized by weak van der Waals interactions.

Multiphase Under-Liquid Biofabrication With Living Soft Matter: A Route to Customize Functional Architectures With Microbial Nanocellulose

The growth of aerobic microbes at air-water interfaces typically leads to biofilm formation. Herein, a fermentative alternative that relies on oil-water interfaces to support bacterial activity and aerotaxis is introduced. The process uses under-liquid biofabrication by structuring bacterial nanocellulose (BNC) to achieve tailorable architectures. Cellulose productivity in static conditions is first evaluated using sets of oil homologues, classified in order of polarity. The oils are shown for their ability to sustain bacterial growth and BNC production according to air transfer and solubilization, both of which impact the physiochemical properties of the produced biofilms. The latter are investigated in terms of their morphological (fibril size and network density), structural (crystallinity) and physical-mechanical (surface area and strength) features. The introduced under-liquid biofabrication is demonstrated for the generation of BNC-based macroscale architectures and compartmentalized soft matter. This can be accomplished following three different routes, namely, 3D under-liquid networking (multi-layer hydrogels/composites), emulsion templating (capsules, emulgels, porous materials), and anisotropic layering (Janus membranes). Overall, the proposed platform combines living matter and multi-phase systems as a robust option for material development with relevance in biomedicine, soft robotics, and bioremediation, among others.

Cosmetically Approved Short-Chain Alcohol/Triethyl Citrate/Water Surfactant-Free Microemulsions and Potential Application to Transdermal Penetration of α-Arbutin

Surfactant-free microemulsions (SFMEs) exhibited remarkable advantages and potential, attributed to their similarity to traditional surfactant-based microemulsions and the absence of surfactants. Herein, a novel SFME was developed utilizing cosmetically approved materials, such as short-chain alcohol as an amphi-solvent, triethyl citrate (TEC) as the nonpolar phase, and water as the polar phase. 1,2-Pentanediol (PtDO)/TEC/water combination can form the largest monophasic zone, accounting for ∼74% of the total phase diagram area, due to an optimal hydrophilic (water)-lipophilic (TEC) balance. Comparable to surfactant-based microemulsion, PtDO/TEC/water SFME can also be categorized into three types: water-in-oil, discontinuous, and oil-in-water. As TEC or water is increased, or PtDO is decreased, the nanoaggregates in PtDO/TEC/water SFME grow from <5 nm to tens of nanometers. The addition of α-arbutin (ABN) does not disrupt PtDO/TEC/water SFME, but rather enhances its formation, resulting in a larger monophasic area and consistent size (2.8-3.8 nm) through participating in interface assembly. Furthermore, ABN-loaded PtDO/TEC/water SFME exhibits remarkable resistance to dilution, exceptional stability, and minimal irritation. Notably, PtDO/TEC/water SFME significantly boosts ABN's solubility in water by 2 times, its percutaneous penetration rate by 3-4 times, and enables a slow-release DPPH• radical scavenging effect. This SFME serves as a safe and cosmetically suitable nanoplatform for the delivery of bioactive substances.

Recent Progress of Solid-Liquid Interface-Mediated Contact-Electro-Catalysis

Contact electrification (CE) is a common physical process by which triboelectric charges are generated through the mutual contact between two objects. Despite the ongoing debates on CE's mechanism, recent advancements in technology have elucidated the primary role of electron transfer in most CE processes. This discovery leads to the spawning of an emerging field, known as contact-electro-catalysis (CEC), which utilizes the electron transfer phenomenon during CE to initiate CEC. In this work, we provide the first comprehensive review of the recent progress of the solid-liquid interface-mediated CEC process, including its working principles, relationship with surface science, recent breakthroughs in applications, and future challenges. We aim to provide fundamental guidance for researchers to understand the reaction mechanism of the CEC process and to propose potential pathways to enhance CEC efficiency from a surface and interfacial science perspective. Later, recent application scenarios using the novel CEC techniques are summarized, including wastewater treatment, efficient generation of hydrogen peroxide (H2O2), lithium-ion battery recycling, and CO2 reduction. In general, CEC technology has opened a new avenue for catalysis, effectively expanding the range of catalyst options and holding promise as a solution to a variety of complex catalytic challenges in the future.

Microstructure-dependent CO2-responsive microemulsions for deep-cleaning of oil-contaminated soils

CO2-responsive microemulsion (ME) is considered a promising candidate for deep-cleaning and oil recovery from oil-contaminated soils. Understanding the responsive nature of different microstructures (i.e., oil-in-water (O/W), bicontinuous (B.C.) and water-in-oil (W/O)) is essential for unlocking the potential and mechanisms of CO2-responsive emulsions in complex multiphase systems and providing comprehensive guidance for remediation of oil-contaminated soils. Herein, the responsiveness of microstructures of ME to CO2 trigger was investigated using experimental designs and coarse-grained molecular dynamic simulations. MEs were formed for the first time by a weakly associated pseudo-Gemini surfactant of indigenous organic acids (naphthenic acids, NAs are a class of natural surface-active molecules in crude oil) and tetraethylenepentamine (TEPA) through fine tuning of co-solvent of dodecyl benzene sulfonic acid (DBSA) and butanol. The O/W ME exhibited an optimal CO2-responsive character due to easier proton migration in the continuous aqueous phase and more pronounced dependence of configuration on deprotonated NA ions. Conversely, the ME with W/O microstructure exhibited a weak to none responsive characteristic, most likely attributed to its high viscosity and strong oil-NA interactions. The O/W ME also showed superior cleaning efficiency and oil recovery from oil-contaminated soils. The results from this study provide insights for the design of CO2-responsive MEs with desired performance and guidance for choosing the favorable operating conditions in various industrial applications, such as oily solid waste treatment, enhanced oil recovery (EOR), and pipeline transportation. The insights from this work allow more efficient and tailored design of switchable MEs for manufacturing advanced responsive materials in various industrial sectors and formulation of household products.

Dual-responsive colloidosome-like microgels as the building blocks for phase inversion of Pickering emulsions

The intelligent regulation of microgel-stabilized Pickering emulsions with multi-responsiveness is presently constrained to the processes of emulsification and destabilization. However, the expansion of multi-control over Pickering emulsions to involve phase inversion and the investigation of the accompanying processes and mechanisms present a great challenge. In this study, a microgel with dual responsiveness to both pH and temperature was synthesized using an emulsion template. The resulting microgel exhibited a robust colloidosome-like structure, distinguished by the presence of monolayer-adsorbed silica nanoparticles. The regulation of the packing of surface-covered silica nanoparticles was easily achieved through the swelling of the microgel matrix. Furthermore, the wettability of the microgel can be adjusted between hydrophilic and hydrophobic intervals, allowing for the effective and dual-responsive phase inversion of Pickering emulsions. Moreover, it has been observed that colloidosome-like microgels can lead to unique interfacial structures during the emulsification process, thereby elucidating the fundamental mechanism governing emulsion phase inversion.

Super-Macroporous Lightweight Materials Templated from Bicontinuous Intra-Phase Jammed Emulsion Gels Based on Nanochitin

Non-equilibrium multiphase systems are formed by mixing two immiscible nanoparticle dispersions, leading to bicontinuous emulsions that template cryogels with interconnected, tortuous channels. Herein, a renewable, rod-like biocolloid (chitin nanocrystals, ChNC) is used to kinetically arrest bicontinuous morphologies. Specifically, it is found that ChNC stabilizes intra-phase jammed bicontinuous systems at an ultra-low particle concentration (as low as 0.6 wt.%), leading to tailorable morphologies. The synergistic effects of ChNC high aspect ratio, intrinsic stiffness, and interparticle interactions produce hydrogelation and, upon drying, lead to open channels bearing dual characteristic sizes, suitably integrated into robust bicontinuous ultra-lightweight solids. Overall, it demonstrates the successful formation of ChNC-jammed bicontinuous emulsions and a facile emulsion templating route to synthesize chitin cryogels that form unique super-macroporous networks.

Redox-responsive microemulsion: Fabrication and application to curcumin encapsulation

HYPOTHESIS

Stimulus-responsive microemulsions have aroused significant attention because of their versatile and reversible switchability between stable and unstable states. However, most stimuli-responsive microemulsions are based on stimuli-responsive surfactants. We posit that the change in the hydrophilicity of a selenium-containing alcohol triggered by a mild redox reaction could also influence the stability of microemulsions and provide a new nanoplatform for the delivery of bioactive substances.

EXPERIMENTS

A selenium-containing diol (3,3'-selenobis(propan-1-ol), PSeP) was designed and used as a co-surfactant in a microemulsion with ethoxylated hydrogenated castor oil (HCO40), diethylene glycol monohexyl ether (DGME), 2-n-octyl-1-dodecanol (ODD) and water. The redox-induced transition in PSeP was characterized by ¹H NMR, ⁷⁷Se NMR, and MS. The redox-responsiveness of the ODD/HCO40/DGME/PSeP/water microemulsion was investigated through determination of a pseudo-ternary phase diagram, analysis by dynamic light scattering, and electrical conductivity, and its encapsulation performance was evaluated by determination of the solubility, stability, antioxidant activity, and skin penetrability of encapsulated curcumin.

FINDINGS

The redox conversion of PSeP enabled efficient switching of ODD/HCO40/DGME/PSeP/water microemulsions. Addition of oxidant (H₂O₂), oxidized PSeP into more hydrophilic PSeP-Ox (selenoxide), disrupting the emulsifying capacity of the combination of HCO40/DGME/PSeP, markedly reducing the monophasic microemulsion region in the phase diagram, and inducing phase separation in some formulations. Addition of reductant (N₂H₄·H₂O), reduced PSeP-Ox and restored the emulsifying capacity of the combination of HCO40/DGME/PSeP. In addition, PSeP-based microemulsions can significantly enhance the solubility in oil (by 23 times), stability, antioxidant capacity (DPPH∙ radical scavenging by 91.74 %), and skin penetrability of curcumin, showing clear potential for encapsulation and delivery of curcumin and other bioactive substances.

Advances in CO2-switchable surfactants towards the fabrication and application of responsive colloids

CO₂-switchable surfactants have selective surface-activity, which can be activated or deactivated either by adding or removing CO₂ from the solution. This feature enables us to use them in the fabrication of responsive colloids, a group of dispersed systems that can be controlled by changing the environmental conditions. In chemical processes, including extraction, reaction, or heterogeneous catalysis, colloids are required in some specific steps of the processes, in which maximum contact area between immiscible phases or reactants is desired. Afterward, the colloids must be broken for the postprocessing of products, solvents, and agents, which can be facilitated by using CO₂-switchable surfactants in surfactant-stabilized colloids. These surfactants are mainly cationic and can be activated by the protonation of a nitrogen-containing group upon sparging CO₂ gas. Also, CO₂-switchable superamphiphiles can be formed by non-covalent bonding between components at least one of which is CO₂-switchable. So far, CO₂-switchable surfactants have been used in CO₂-switchable spherical and wormlike micelles, vesicles, emulsions, foams, and Pickering emulsions. Here, we review the fabrication procedure, chemical structure, switching scheme, stability, environmental conditions, and design philosophy of such responsive colloids. Their fields of application are wide, including emulsion polymerization, catalysis, soil washing, drug delivery, extraction, viscosity control, and oil transportation. We also emphasize their application for the CO₂-assisted enhanced oil recovery (EOR) process as a promising approach for carbon capture, utilization, and storage to combat climate change.

Novel Strategy of Polymers in Combination with Silica Particles for Reversible Control of Oil-Water Interface

Hybrid smart emulsification systems are highly applicable in manipulating oil-in-water (O/W) droplets. Herein, novel switchable block polymers containing both zwitterionic and tertiary amine pendent groups were designed and synthesized to combine with charged silica particles to stabilize the O/W emulsion responsive to pH. This study was carried out in O/W emulsions stabilized with the polymer and silica particles under different pH conditions. The emulsion system was also simulated using molecular dynamics simulation to reveal the mechanism at molecular levels, thus gaining insight into the relationships between the emulsifying properties and the molecular interaction of the mixed system. Upon acidification of the continuous aqueous phase, protonated polymers with excellent hydrophilicity were induced by charged silica particles to cause rapid emulsion coalescence. In alkaline media, the mixed system conversely stabilized the O/W emulsions, cutting polymer consumption by over three-quarters. The emulsification and demulsification can be switched alternately by tuning the pH conditions. The applications exhibited excellent efficiency in separating heavy oil/water emulsions and proved the high conversion rate in emulsion polymerization. Overall, with this novel strategy to relieve tedious modifications on particle surfaces and massive consumption of polymers, the designed responsive emulsification systems can impart intelligent and controllable chemical reactivity to emulsions on demand in a more affordable and sustainable way.

Reversible First-Order Single Crystal to Single Crystal Thermal Phase Transition in [(CH3)3CNH3]4[V4O12]

The well-known compound tetrakis(tert-butylammonium)-cyclo-tetrametavanadate (V), [(CH₃)₃CNH₃]₄[V₄O₁₂] (1h_RT), which crystallizes in the tetragonal I4/m space group, undergoes an irreversible solid state transformation upon heating, constituting one of the few examples in which the initial and the final stages are structurally characterized by sc-XRD. Now, we observed the ability of the same compound to undergo an additional single-crystal-to-single-crystal (SCSC) transformation upon thermal stimuli, but this time at low temperatures (153 K). Compound 1h_RT contains a discrete unprotonated [V₄O₁₂]^4- tetrahedral anion in which V and O bridging atoms are coplanar. In both phases, these tetrameric anions are linked through tert-butylammonium cations in an extensive network of hydrogen bonds, but at low temperatures, this phase loses its characteristic O-V-O coplanarity, with the resulting rearrangement of the crystal packing and hydrogen-bond network which provide its reversibility at low temperatures. Again, the initial and final stages have been characterized structurally by sc-XRD.

Molecular structure-tuned stability and switchability of CO2-responsive oil-in-water emulsions

HYPOTHESIS

Pseudo-Gemini surfactants (PGS) possessing switchable and recyclable features have drawn increasing attention on generating high-performance CO₂-responsive emulsions for wide range and versatile applications. However, there is a lack of fundamental understanding on how the molecular structure of PGS affects the stability and switchability of emulsions. We hypothesize that the length and type of the spacer in PGS play a decisive role in controlling interfacial and switching properties.

EXPERIMENTS

Two series of PGS with different spacers were prepared through electrostatic association between amines and oleic acid. The interfacial activity and CO₂-responsive properties of corresponding emulsions were systematically investigated by well-designed experiments and molecular dynamics simulations.

FINDINGS

Increasing the spacer length to allow the bent configuration leads to more tight arrangement of oleic molecules, consequently improving the interfacial activity. In addition, the introduction of amino group into the spacer dramatically promotes CO₂ response of resulting PGS due to ehanced migration of the spacer from the interface to the aqueous phase after CO₂ addition. These results are inspiring in designing controllable CO₂-responsive emulsions for a wide range of industrial applications (e.g., enhanced oil recovery and oil-contaminated soil remediation).

Engineering hybrid microgels as particulate emulsifiers for reversible Pickering emulsions

Thermo-responsive microgels are unique stabilizers for stimuli-sensitive Pickering emulsions that can be switched between the state of emulsification and demulsification by changing the temperature. However, directly temperature-triggering the phase inversion of microgel-stabilized emulsions remains a great challenge. Here, a hybrid poly(N-isopropylacrylamide)-based microgel has now been successfully fabricated with tunable wettability from hydrophilicity to hydrophobicity in a controlled manner. Engineered microgels are synthesized from an inverse emulsion stabilized with hydrophobic silica nanoparticles, and the swelling-induced feature can make the resultant microgel behave like either hydrophilic or hydrophobic colloids. Remarkably, the phase inversion of such microgel-stabilized Pickering emulsions can be in situ regulated by temperature change. Moreover, the engineered microgels were capable of stabilizing water-in-oil Pickering emulsions and encapsulation of enzymes for interfacial bio-catalysis, as well as rapid cargo release triggered by phase inversion.

A multifunctional and environmentally safe superhydrophobic membrane with superior oil/water separation, photocatalytic degradation and anti-biofouling performance

Wastewater is typically complicated with spilled oil, water soluble toxic dyes and microorganisms, making it hard to be processed and causing a significant threat to the environmental safety and human health. In this paper, we demonstrate a simple solution immersion method to obtain a multifunctional cellulose-based membrane (CBM) that possesses both superhydrophobicity with a water contact angle of 163° and superior functionalities including self-cleaning, oil-water separation, anti-biofouling, and photocatalytic degradation capabilities. The achievement of separation efficiency (96%), comparatively high flux (141 L·m^-2·h^-1) and recyclable (7 times) oil/water separation performance is attributed to the robust superhydrophobicity enabled by the synergy of metal oxide (i.e., CuO) nanostructure coating and stearic acid (SA) modification. The superhydrophobic CBM also preferentially adsorbs organic dyes in aqueous solution, e.g., methylene blue (MB), promoting their efficient decomposition (about 70.3% of MB decomposed in 3 h) with high recyclability under UV irradiation. Most remarkably, the CBM exhibits superior anti-biofouling capability and persistently resists the algae adhesion in long duration (over 20 days), as a result of the self-cleaning ability as well as the antimicrobial property of CuO nanoparticles. Our finding here paves the way to use simple, cost-effective, environmentally safe, and reliable method to fabricate multifunctional materials for wastewater treatment in complex environments.

Application of CO2-Switchable Oleic-Acid-Based Surfactant for Reducing Viscosity of Heavy Oil

CO2-switchable oligomeric surfactants have good viscosity-reducing properties; however, the complex synthesis of surfactants limits their application. In this study, a CO2-switchable "pseudo"-tetrameric surfactant oleic acid (OA)/cyclic polyamine (cyclen) was prepared by simple mixing and subsequently used to reduce the viscosity of heavy oil. The surface activity of OA/cyclen was explored by a surface tensiometer and a potential for viscosity reduction was revealed. The CO2 switchability of OA/cyclen was investigated by alternately introducing CO2 and N2, and OA/cyclen was confirmed to exhibit a reversible CO2-switching performance. The emulsification and viscosity reduction analyses elucidated that a molar ratio of OA/cyclen of 4:1 formed the "pseudo"-tetrameric surfactants, and the emulsions of water and heavy oil with OA/cyclen have good stability and low viscosity and can be destabilized quickly by introducing CO2. The findings reported in this study reveal that it is feasible to prepare CO2-switchable pseudo-tetrameric surfactants with viscosity-reducing properties by simple mixing, thus providing a pathway for the emulsification and demulsification of heavy oil by using the CO2-switchable "pseudo"-oligomeric surfactants.