Uniform and Anisotropic Solid Electrolyte Membrane Enables Superior Solid-State Li Metal Batteries

Poly(ethylene oxide)-based composite solid electrolyte for long cycle life solid-state lithium metal batteries: Improvement of interface stability through a dual mechanism

Solid-state lithium metal batteries (SSLMBs) are promising candidates for safe and high-energy-density next-generation applications. However, harmful interfacial decomposition and uneven Li deposition lead to poor ion transport, a short cycle life, and battery failure. Herein, we propose a novel poly(ethylene oxide) (PEO)-based composite solid electrolyte (CSE) containing succinonitrile (SN) and zinc oxide (ZnO) nanoparticles (NPs), which improves interface stability through a dual mechanism. (1) By anchoring bis(trifluoromethanesulfonyl)imide (TFSI) anions to ZnO, a reliable solid electrolyte interface (SEI) later with abundant LiF can be obtained to inhibit interface decomposition. (2) The immobilization of escaping SN molecules in the SEI layer by ZnO NPs promotes the self-polymerization of SN and facilitates charge transfer through the interface. As a result, the ion conductivity of the stainless steel-symmetrical battery reaches 1.1 × 10-4 S cm-1 at room temperature, and a LiFePO4 (LFP) full battery exhibits ultrahigh stability (800 cycles) at 0.5 C. Thus, the present study provides valuable insights for the development of advanced PEO-based SSLMBs.

Opening and Constructing Stable Lithium-ion Channels within Polymer Electrolytes

Lithium-ion batteries play an integral role in various aspects of daily life, yet there is a pressing need to enhance their safety and cycling stability. In this study, we have successfully developed a highly secure and flexible solid-state polymer electrolyte (SPE) through the in situ polymerization of allyl acetoacetate (AAA) monomers. This SPE constructed an efficient Li+ transport channel inside and effectively improved the solid-solid interface contact of solid-state batteries to reduce interfacial impedance. Furthermore, it exhibited excellent thermal stability, an ionic conductivity of 3.82×10-4 S cm-1 at room temperature (RT), and a Li+ transport number (tLi+) of 0.66. The numerous oxygen vacancies on layered inorganic SiO2 created an excellent environment for TFSI- immobilization. Free Li+ migrated rapidly at the C=O equivalence site with the poly(allyl acetoacetate) (PAAA) matrix. Consequently, when cycled at 0.5C and RT, it displayed an initial discharge specific capacity of 140.6 mAh g-1 with a discharge specific capacity retention rate of 70 % even after 500 cycles. Similarly, when cycled at a higher rate of 5C, it demonstrated an initial discharge specific capacity of 132.3 mAh g-1 while maintaining excellent cycling stability.

A Dynamically Stable Sulfide Electrolyte Architecture for High-Performance All-Solid-State Lithium Metal Batteries

All-solid-state batteries employing sulfide solid electrolyte and Li metal anode are promising because of their high safety and energy densities. However, the interface between Li metal and sulfides suffers from catastrophic instability which stems the practical use. Here, a dynamically stable sulfide electrolyte architecture to construct the hierarchy of interface stability is reported. By rationally designing the multilayer structures of sulfide electrolytes, the dynamic decomposing-alloying process from MS4 (M = Ge or Sn) unit in sulfide interlayer can significantly prohibit Li dendrite penetration is revealed. The abundance of highly electronic insulating decompositions, such as Li2S, at the sulfide interlayer interface helps to well constrain the dynamic decomposition process and preserve the long-term polarization stability is also highlighted. By using Li6PS5Cl||Li10SnP2S12||Li6PS5Cl electrolyte architecture, Li metal anode shows an unprecedented critical current density over 3 mA cm-2 and achieves the steady over-potential for ≈900 hours. Based upon the merits, the Li||LiNi0.8Co0.1Mn0.1O2 battery delivers a remarkable 75.3% retention even after 600 cycles at 1 C (1C-0.95 mA cm-2) under a low stack pressure of 15 MPa.

Tunneling Interpenetrative Lithium Ion Conduction Channels in Polymer-in-Ceramic Composite Solid Electrolytes

Polymer-in-ceramic composite solid electrolytes (PIC-CSEs) provide important advantages over individual organic or inorganic solid electrolytes. In conventional PIC-CSEs, the ion conduction pathway is primarily confined to the ceramics, while the faster routes associated with the ceramic-polymer interface remain blocked. This challenge is associated with two key factors: (i) the difficulty in establishing extensive and uninterrupted ceramic-polymer interfaces due to ceramic aggregation; (ii) the ceramic-polymer interfaces are unresponsive to conducting ions because of their inherent incompatibility. Here, we propose a strategy by introducing polymer-compatible ionic liquids (PCILs) to mediate between ceramics and the polymer matrix. This mediation involves the polar groups of PCILs interacting with Li+ ions on the ceramic surfaces as well as the interactions between the polar components of PCILs and the polymer chains. This strategy addresses the ceramic aggregation issue, resulting in uniform PIC-CSEs. Simultaneously, it activates the ceramic-polymer interfaces by establishing interpenetrating channels that promote the efficient transport of Li+ ions across the ceramic phase, the ceramic-polymer interfaces, and the intervening pathways. Consequently, the obtained PIC-CSEs exhibit high ionic conductivity, exceptional flexibility, and robust mechanical strength. A PIC-CSE comprising poly(vinylidene fluoride) (PVDF) and 60 wt % PCIL-coated Li3Zr2Si2PO12 (LZSP) fillers showcasing an ionic conductivity of 0.83 mS cm-1, a superior Li+ ion transference number of 0.81, and an elongation of ∼300% at 25 °C could be produced on meter-scale. Its lithium metal pouch cells show high energy densities of 424.9 Wh kg-1 (excluding packing films) and puncture safety. This work paves the way for designing PIC-CSEs with commercial viability.

Fluorinating All Interfaces Enables Super-Stable Solid-State Lithium Batteries by In Situ Conversion of Detrimental Surface Li2 CO3

Li-stuffed battery materials intrinsically have surface impurities, typically Li2 CO3 , which introduce severe kinetic barriers and electrochemical decay for a cycling battery. For energy-dense solid-state lithium batteries (SSLBs), mitigating detrimental Li2 CO3 from both cathode and electrolyte materials is required, while the direct removal approaches hardly avoid Li2 CO3 regeneration. Here, a decarbonization-fluorination strategy to construct ultrastable LiF-rich interphases throughout the SSLBs by in situ reacting Li2 CO3 with LiPF6 at 60 °C is reported. The fluorination of all interfaces effectively suppresses parasitic reactions while substantially reducing the interface resistance, producing a dendrite-free Li anode with an impressive cycling stability of up to 7000 h. Particularly, transition metal dissolution associated with gas evolution in the cathodes is remarkably reduced, leading to notable improvements in battery rate capability and cyclability at a high voltage of 4.5 V. This all-in-one approach propels the development of SSLBs by overcoming the limitations associated with surface impurities and interfacial challenges.

Interfacial Interaction of Multifunctional GQDs Reinforcing Polymer Electrolytes For All-Solid-State Li Battery

Solid-state polymer electrolytes are highly anticipated for next generation lithium ion batteries with enhanced safety and energy density. However, a major disadvantage of polymer electrolytes is their low ionic conductivity at room temperature. In order to enhance the ionic conductivity, here, graphene quantum dots (GQDs) are employed to improve the poly (ethylene oxide) (PEO) based electrolyte. Owing to the increased amorphous areas of PEO and mobility of Li+ , GQDs modified composite polymer electrolytes achieved high ionic conductivity and favorable lithium ion transference numbers. Significantly, the abundant hydroxyl groups and amino groups originated from GQDs can serve as Lewis base sites and interact with lithium ions, thus promoting the dissociation of lithium salts and providing more ion pathways. Moreover, lithium dendrite is suppressed, associated with high transference number, enhanced mechanical properties and steady interface stability. It is further observed that all solid-state lithium batteries assembled with GQDs modified composite polymer electrolytes display excellent rate performance and cycling stability.

The Critical Role of Fillers in Composite Polymer Electrolytes for Lithium Battery

With excellent energy densities and highly safe performance, solid-state lithium batteries (SSLBs) have been hailed as promising energy storage devices. Solid-state electrolyte is the core component of SSLBs and plays an essential role in the safety and electrochemical performance of the cells. Composite polymer electrolytes (CPEs) are considered as one of the most promising candidates among all solid-state electrolytes due to their excellent comprehensive performance. In this review, we briefly introduce the components of CPEs, such as the polymer matrix and the species of fillers, as well as the integration of fillers in the polymers. In particular, we focus on the two major obstacles that affect the development of CPEs: the low ionic conductivity of the electrolyte and high interfacial impedance. We provide insight into the factors influencing ionic conductivity, in terms of macroscopic and microscopic aspects, including the aggregated structure of the polymer, ion migration rate and carrier concentration. In addition, we also discuss the electrode-electrolyte interface and summarize methods for improving this interface. It is expected that this review will provide feasible solutions for modifying CPEs through further understanding of the ion conduction mechanism in CPEs and for improving the compatibility of the electrode-electrolyte interface.

N,S-Doped Porous Carbon Nanobelts Embedded with MoS2 Nanosheets as a Self-Standing Host for Dendrite-Free Li Metal Anodes

Metallic Li is one of the most promising anodes for high-energy secondary batteries. However, the enormous volume changes and severe dendrite formation during the Li plating/stripping process hinder the practical application of Li metal anodes (LMAs). We have developed a sulfate-assisted strategy to synthesize a self-standing host composed of N,S-doped porous carbon nanobelts embedded with MoS₂ nanosheets (MoS₂ @NSPCB) for use in LMAs. In situ measurements and theoretical calculations reveal that the uniformly distributed MoS₂ derivatives within the carbon nanobelts serve as stable lithiophilic sites which effectively homogenize Li nucleation and suppress dendrite formation. In addition, the hierarchical porosity and 3D nanobelt networks ensure fast Li-ion diffusion and accommodate the volume change of Li deposits during the plating/stripping process. As a result, a Li-Li symmetric cell using the MoS₂ @NSPCB host operates steadily over 1500 h with an ultralow voltage hysteresis (≈24.2 mV) at 3 mA cm^-2 /3 mAh cm^-2 . When paired with a LiFePO₄ cathode, the current collector-free LMA endows the full cell with a high energy density of 460 Wh kg^-1 and good cycling performance (with a capacity retention of ≈70% even after 1600 cycles at 10 C).

Probing the Phase Transition during the Formation of Lithium Lanthanum Zirconium Oxide Solid Electrolyte

Lithium lanthanum zirconium oxide (LLZO) has long been considered as a promising solid electrolyte for all-solid-state lithium (Li) metal batteries because of its interfacial stability when coupled with a Li metal anode. However, the cubic phase of LLZO (c-LLZO) with a higher Li-ion conductivity has a complex atomic structure and is subject to complicated phase transition during its processing and working conditions, which remain largely elusive. Here, we reveal the phase transition process during the formation of c-LLZO nanotubes through detailed microscopic characterization by scanning and transmission electron microscopy as well as X-ray diffraction. We find four typical stages during the formation of c-LLZO along with several intermediate phases including lanthanum (La)-rich cubic lanthanum zirconium oxide (La-rich c-LZO), c-LZO, and La-rich c-LLZO. We also reveal the role of m-Li₂CO₃ and h-Li₂O₂ as the "phase mediator".

New Insights into the Effects of Zr Substitution and Carbon Additive on Li3-xEr1-xZrxCl6 Halide Solid Electrolytes

Halide solid electrolytes have been considered as the most promising candidates for practical high-voltage all-solid-state lithium-ion batteries (ASSLIBs) due to their moderate ionic conductivity and good interfacial compatibility with oxide cathode materials. Aliovalent ion doping is an effective strategy to increase the ionic conductivity of halide electrolytes. However, the effects of ion doping on the electrochemical stability window of halide electrolytes and carbon additive on electrochemical performance are still unclear by far. Herein, a series of Zr-doped Li_3-xEr_1-xZr_xCl₆ halide solid electrolytes (SEs) are synthesized through a mechanochemical method and the effects of Zr substitution on the ionic conductivity and electrochemical stability window are systematically investigated. Zr doping can increase the ionic conductivity, whereas it narrows the electrochemical stability window of the Li₃ErCl₆ electrolyte simultaneously. The optimized Li_2.6Er_0.6Zr_0.4Cl₆ electrolyte exhibits both a high ionic conductivity of 1.13 mS cm^-1 and a high oxidation voltage of 4.21 V. Furthermore, carbon additives are demonstrated to be beneficial for achieving high discharge capacity and better cycling stability and rate performance for halide-based ASSLIBs, which are completely different from the case of sulfide electrolytes. ASSLIBs with uncoated LiCoO₂ cathode and carbon additives exhibit a high discharge capacity of 147.5 mAh g^-1 and superior cycling stability with a capacity retention of 77% after 500 cycles. This work provides an in-depth understanding of the influence of ion doping and carbon additives on halide solid electrolytes and feasible strategies to realize high-energy-density ASSLIBs.

Ternary-Salt Solid Polymer Electrolyte for High-Rate and Long-Life Lithium Metal Batteries

Ternary-salt solid polymer electrolyte (TS-SPE) consisting of LiPF6-LiTFSI-LiFSI salts and poly(1,3-dioxolane) is created by in-situ polymerization. The TS-SPE possesses high ionic conductivity, high Li+ ion transference number, and stable SEI...

Structural and Chemical Compatibilities of Li1- x Ni0.5 Co0.2 Mn0.3 O2 Cathode Material with Garnet-Type Solid Electrolyte for All-Solid-State Batteries

All-solid-state batteries (ASSBs) based on ceramic materials are considered a key technology for automobiles and energy storage systems owing to their high safety and stability. However, contact issues between the electrode and solid-electrolyte materials and undesired chemical reaction occurring at interfaces have hindered their development. Herein, the chemical compatibility and structural stability of composite mixtures of the layered cathode materials Li_{1- x} Ni_0.5 Co_0.2 Mn_0.3 O₂ (NCM523) with the garnet-type solid electrolyte Li_6.25 Ga_0.25 La₃ Zr₂ O₁₂ (LLZO-Ga) during high-temperature co-sintering under various gas flowing conditions are investigated. In situ high-temperature X-ray diffraction analysis of the composite materials reveals that Li diffusion from LLZO-Ga to NCM523 occurs at high temperature under synthetic air atmosphere, resulting in the decomposition of LLZO-Ga into La₂ Zr₂ O₇ and the recovery of charged NCM523 to the as-prepared state. The structural stability of the composite mixture at high temperature is further investigated under N₂ atmosphere, revealing that Li diffuses toward the opposite direction and involves the phase transition of LLZO-Ga from a cubic to tetragonal structure and the reduction of the NCM523 cathode to Ni metal. These findings provide insight into the structural stability of layered cathode and garnet-type solid-electrolyte composite materials and the design of stable interfaces between them via co-sintering for ASSBs.