Synergistic Mechanism of Sub-Nanometric Ru Clusters Anchored on Tungsten Oxide Nanowires for High-Efficient Bifunctional Hydrogen Electrocatalysis

Tungsten oxide-based electrocatalysts for energy conversion

The advancement of cutting-edge energy conversion technologies offers significant potential for addressing environmental challenges, enhancing energy security, improving economic competitiveness, and promoting resource conservation. This progress necessitates the development of advanced electrocatalysts. WOx demonstrates high intrinsic catalytic activity, excellent conductivity, an abundance of active sites, and remarkable stability, positioning it as a promising candidate for electrocatalytic reactions. Recently, there has been swift advancement in the development of WOx-based catalysts for various energy-conversion reactions. This review provides a thorough summary of recent developments in WOx-based catalysts for electrocatalytic reactions, emphasizing their multifunctional roles as active species, electron-transfer carriers, hydrogen spillover carriers, and microenvironment regulators. Moreover, it highlights the applications of WOx-based catalysts across different electrocatalytic reactions, with particular focus on the structure-activity relationship. Finally, the review discusses the challenges and future directions of these technologies, as well as key research areas necessary for achieving large-scale applications.

Immobilization of Metal Nanoparticles to an Ultrathin Two-Dimensional Conjugated Metal-Organic Framework for Synergistic Electrocatalysis

Metal-organic frameworks (MOFs) have been considered as promising hosts for immobilizing ultrafine metal nanoparticles (MNPs) due to their high surface area and porosity. However, electrochemical applications of such emerging composites are severely limited by the poor electrical conductivity and large size of the MOFs. Herein, we report the general synthesis of incorporating various MNPs into a conjugated MOF ultrathin nanosheet (Cu-TCPP UNS) matrix, which not only prevents agglomeration and restricts the growth of MNPs but also benefits the exposure of active sites and the transport of electrons. Specifically, the obtained PtCu@Cu-TCPP UNSs exhibited nearly two times higher mass activity for the methanol oxidation reaction (MOR) than the commercial Pt/C catalyst. Mechanistic studies reveal that the strong interaction between MNPs and Cu-TCPP promotes the oxidation of the CO intermediate. Moreover, the PtCu@Cu-TCPP UNSs can be employed as bifunctional electrocatalysts to couple MOR with the hydrogen evolution reaction for highly efficient hydrogen production.

Ti3C2Tx MXene-supported ruthenium nanoclusters for efficient electrocatalytic hydrogen evolution

Developing an efficient and stable catalyst is both attractive and challenging for the electrochemical hydrogen evolution reaction (HER) due to the aggravation under the operating environment. MXene (Ti3C2Tx) is a potential catalyst support because of its abundant surface functional groups and unique hydrophilicity. However, anchoring noble metals onto MXene to construct high-performance electrocatalysts still presents some challenges. Herein, we present an MXene nanoparticle-supported Ru nanocluster (Ru@MXene-NP) electrocatalyst for HER. The Ru@MXene-NP not only effectively prohibits self-stacking but also ensures the full exposure of Ru nanoclusters. Thus, the Ru@MXene-NP catalyst exhibits an overpotential of 38.4 mV at 10 mA cm-2 and a Tafel slope of 26.4 mV dec-1 in an acidic medium, showcasing superior performance compared to most previously reported MXene-based catalysts. The small Tafel slope and low charge transfer resistance (Rct = 0.39 Ω) value indicate its fast electron transfer behavior. In addition, cyclic voltammetry curves and chronoamperometry tests demonstrate the high stability of Ru@MXene-NP. This work offers a novel perspective for designing catalysts by supporting noble metal nanoclusters on the MXene substrate's surface.

Ru Nanoparticles Encapsulated by Defective TiO2 Boost the Hydrogen Oxidation/ Evolution Reaction

The development of efficient and durable electrocatalysts for the alkaline hydrogen oxidation/evolution reaction is crucial for anion exchange membrane fuel cells/water electrolyzers. However, designing such electrocatalysts poses a challenge due to the need for optimizing various adsorbates. Herein, highly dispersed Ru nanoparticles catalysts is reported encapsulated and supported by defective anatase phase of titanium dioxide (named as Ru NPs/def-TiO2(A)) for boosting hydrogen-cycle electrocatalysis with robust anti-CO-poisoning in alkaline conditions. The Ru NPs/def-TiO2(A) achieves a high-quality activity of 7.65 A mgRu -1, which is 23.2 and 9.5-fold higher than commercial Ru/C and Pt/C in alkaline HOR. Moreover, this catalyst exhibits an outstanding overpotential of 21 mV at 10 mA cm-2 in alkaline HER. Hydrogen underpotential deposition (Hupd) and CO stripping experiments demonstrate that Ru NPs/def-TiO2(A) has the optimized H*, OH*, and CO* adsorption strength, enabling the Ru NPs/def-TiO2(A) catalyst to display excellent and robust HOR/HER performance under alkaline conditions. Using density functional theory calculations, the enhanced HOR performance mechanism for the Ru NPs/def-TiO2(A) catalyst originates from the TiO2 step face in contact with the Ru nanoparticles, indicating that the kinetics of water formation are considerably more favorable at the Ru NPs/def-TiO2(A) interface.

Interfacial Regulation of Rice-Grain-like Iron-Nickel Phosphide Nanorods on Phosphorus-Doped Graphene Architectures as Bifunctional Electrocatalysts for Water Splitting

The design of bimetallic metal-organic frameworks (MOFs) with a hierarchical structure is important to improve the electrocatalytic performance of catalysts due to their synergistic effect on different metal ions. In this work, the catalyst comprises bimetallic iron-nickel MOF-derived FeNi phosphides, intricately integrated with phosphorus-doped reduced graphene oxide architectures (FeNi2P-C/P-rGA) through the hydrothermal and phosphating treatments. The hierarchical architecture of the catalyst is beneficial for exposing active sites and facilitating electron transfer. The FeNi2P-C/P-rGA catalyst exhibits excellent performance in the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in alkaline electrolytes. Notably, FeNi2P-C/P-rGA requires only the overpotential of 93 and 210 mV to achieve a current density of 10 mA cm-2 for the HER and OER with small values of Tafel slope and charge transfer resistance, respectively. Furthermore, the catalyst exhibits boosted activity for overall water splitting with a low potential of 1.56 V. This work can be considered to extend the design of multilevel catalysts in the application of water splitting.

High-Entropy Materials in Electrocatalysis: Understanding, Design, and Development

Electrocatalysis is a crucial method for achieving global carbon neutrality, serving as an essential means of energy conversion, and electrocatalyst is crucial in the process of electrocatalysis. Because of the abundant active sites, the multi-component synergistic effect of high-entropy materials has a wide application prospect in the field of electrocatalysis. Moreover, due to the special structure of high-entropy materials, it is possible to obtain almost continuous adsorption energy distribution by regulating the composition, which has attracted extensive attention of researchers. This paper reviews the properties and types of high-entropy materials, including alloys and compounds. The synthesis strategies of high-entropy materials are systematically introduced, and the solid phase synthesis, liquid-phase synthesis, and gas-phase synthesis are classified and summarized. The application of high-entropy materials in electrocatalysis is summarized, and the promotion effect of high-entropy strategy in various catalytic reaction processes is summarized. Finally, the current progress of high-entropy materials, the problems encountered, and the future development direction are reviewed. It is emphasized that the strategy of high flux density functional theory calculation guiding high-entropy catalyst design will be of great significance to electrocatalysis.

Visualizing the Structure and Dynamics of Transition Metal-Based Electrocatalysts Using Synchrotron X-Ray Absorption Spectroscopy

As the global energy structure evolves and clean energy technologies advance, electrocatalysis has become a focal point as a critical conversion pathway in the new energy sector. Transitional metal electrocatalysts (TMEs) with their distinctive electronic structures and redox properties show great potential in electrocatalytic reactions. However, complex reaction mechanisms and kinetic limitations hinder the improvement of energy conversion efficiency, highlighting the necessity for comprehensive studies on structure and performance of electrocatalysts. X-ray Absorption Fine Structure (XAFS) spectra stand out as a robust tool for examining the electrocatalyst's structures and performance due to its atomic selectivity and sensitivity to local environments. This review delves into the application of XAFS technology in characterizing TMEs, providing in-depth analyses of X-ray Absorption Near-Edge Structure (XANES) spectra, and Extended XAFS (EXAFS) spectra in both R-space and k-space. These analyses reveal intrinsic structural information, electronic interactions, catalyst stability, and aggregation morphology. Furthermore, the paper examines advancements in in-situ XAFS techniques for real-time monitoring of active site changes, capturing critical intermediate and transitional states, and elucidating the evolution of active species during electrocatalytic reactions. These insights deepen our understanding on structure-activity relationship of electrocatalysts and offer valuable guidance for designing and developing highly active and stable electrocatalysts.

Accelerated proton dissociation in an excited state induces superacidic microenvironments around graphene quantum dots

Investigating proton transport at the interface in an excited state facilitates the mechanistic investigation and utilization of nanomaterials. However, there is a lack of suitable tools for in-situ and interfacial analysis. Here we addresses this gap by in-situ observing the proton transport of graphene quantum dots (GQDs) in an excited state through reduction of magnetic resonance relaxation time. Experimental results, utilizing 0.1 mT ultra-low-field nuclear magnetic resonance relaxometry compatible with a light source, reveal the light-induced proton dissociation and acidity of GQDs' microenvironment in the excited state (Hammett acidity function: -13.40). Theoretical calculations demonstrate significant acidity enhancement in -OH functionalized GQDs with light induction ( p K a *  = -4.62, stronger than that of H2SO4). Simulations highlight the contributions of edge and phenolic -OH groups to proton dissociation. The light-induced superacidic microenvironment of GQDs benefits functionalization and improves the catalytic performances of GQDs. Importantly, this work advances the understanding of interfacial properties of light-induced sp2-sp3 carbon nanostructure and provides a valuable tool for exploring catalyst interfaces in photocatalysis.

Ruthenium-based single atom catalysts: synthesis and application in the electrocatalytic hydrogen evolution reaction

Electrocatalytic water splitting is a promising production method for green hydrogen; however, its practical application is limited by the lack of robust catalysts for the cathode hydrogen evolution reaction (HER). Recently, the use of Ru in electrocatalytic HER has become a research hotspot because Ru has a metal-hydrogen bond strength similar to that of Pt - known for its excellent HER activity - but has a lower cost than Pt. Numerous modification strategies are available to further improve the HER activity of metal Ru such as vulcanisation, phosphating and atomisation. The atomisation strategy has attracted much attention owing to its extremely high Ru atomic utilisation efficiency and tunable electronic structures. However, isolated studies could not effectively address the bottlenecks. Therefore, to promote the effective exploration of Ru-based single-atom catalysts and clarify the research status in this field, studies on related topics (e.g. Ru single-atom catalysts, Ru dual-atom catalysts, composite catalysts containing single-atom Ru and Ru nanoparticles) have been systematically and briefly summarised herein. Finally, the research challenges and prospects of Ru-based single-atom catalysts in the HER field have been discussed, which may provide valuable insights for further research.

Engineering the electronic structure of sub-nanometric Ru clusters via Pt single-atom modification for highly efficient electrocatalytic hydrogen evolution

Developing electrocatalysts with high activity toward the hydrogen evolution reaction (HER) is a prerequisite for hydrogen fuel generation and sustainable development, but current Pt-based catalysts usually suffer from high cost and unsatisfactory performance in non-acidic media. In this work, we report an environmentally friendly and pyrolysis-free synthesis strategy to prepare an efficient catalyst, CNT-NPA-PtRu, with Pt single-atom engineered sub-nanometric Ru clusters anchored at phytic acid-modified carbon nanotubes for electrochemical HER at all pH conditions. The electronic structure of active sub-nanometric Ru clusters was optimized, which further enhanced the HER activity. The synthesized CNT-NPA-PtRu catalyst presents superior performance, reaching the current density of 10 mA cm-2 with only 18.3, 18.7 and 15 mV overpotential in alkaline, acidic and neutral electrolyte, respectively. Experimental results and theoretical calculations reveal that the single Pt atom on the sub-nanometric Ru cluster surface could modulate the electronic structure of Ru and subsequently optimize the adsorption of reaction intermediates, thus promoting HER performance. These findings underscore the importance of engineering the electronic structure of sub-nanometric clusters and offer an effective approach for the generation of high-performance electrocatalysts for HER.

Self-supported bimetallic array superstructures for high-performance coupling electrosynthesis of formate and adipate

The coupling electrosynthesis involving CO2 upgrade conversion is of great significance for the sustainable development of the environment and energy but is challenging. Herein, we exquisitely constructed the self-supported bimetallic array superstructures from the Cu(OH)2 array architecture precursor, which can enable high-performance coupling electrosynthesis of formate and adipate at the anode and the cathode, respectively. Concretely, the faradaic efficiencies (FEs) of CO2-to-formate and cyclohexanone-to-adipate conversion simultaneously exceed 90% at both electrodes with excellent stabilities. Such high-performance coupling electrosynthesis is highly correlated with the porous nanosheet array superstructure of CuBi alloy as the cathode and the nanosheet-on-nanowire array superstructure of CuNi hydroxide as the anode. Moreover, compared to the conventional electrolysis process, the cell voltage is substantially reduced while maintaining the electrocatalytic performance for coupling electrosynthesis in the two-electrode electrolyzer with the maximal FEformate and FEadipate up to 94.2% and 93.1%, respectively. The experimental results further demonstrate that the bimetal composition modulates the local electronic structures, promoting the reactions toward the target products. Prospectively, our work proposes an instructive strategy for constructing adaptive self-supported superstructures to achieve efficient coupling electrosynthesis.

Ice-Templated Synthesis of Atomic Cluster Cocatalyst with Regulable Coordination Number for Enhanced Photocatalytic Hydrogen Evolution

Supported metal catalysts have been exploited in various applications. Among them, cocatalyst supported on photocatalyst is essential for activation of photocatalysis. However, cocatalyst decoration in a controllable fashion to promote intrinsic activity remains challenging. Herein, a versatile method is developed for cocatalyst synthesis using an ice-templating (ICT) strategy, resulting in size control from single-atom (SA), and atomic clusters (AC) to nanoparticles (NP). Importantly, the coordination numbers (CN) of decorated AC cocatalysts are highly controllable, and this ICT method applies to various metals and photocatalytic substrates. Taking narrow-band gap Ga-doped La5Ti2Cu0.9Ag0.1O7S5 (LTCA) photocatalyst as an example, supported Ru AC/LTCA catalysts with regulable Ru CNs have been prepared, delivering significantly enhanced activities compared to Ru SA and Ru NPs supported on LTCA. Specifically, Ru(CN = 3.4) AC/LTCA with an average CN of Ru─Ru bond measured to be ≈3.4 exhibits excellent photocatalytic H2 evolution rate (578 µmol h-1) under visible light irradiation. Density functional theory calculation reveals that the modeled Ru(CN = 3) atomic cluster cocatalyst possesses favorable electronic properties and available active sites for the H2 evolution reaction.

Interfacial Design of Ti3C2Tx MXene/Graphene Heterostructures Boosted Ru Nanoclusters with High Activity Toward Hydrogen Evolution Reaction

The development of a cost-competitive and efficient electrocatalyst is both attractive and challenging for hydrogen production by hydrogen evolution reaction (HER). Herein, a facile glycol reduction method to construct Ru nanoclusters coupled with hierarchical exfoliated-MXene/reduced graphene oxide architectures (Ru-E-MXene/rGA) is reported. The hierarchical structure, formed by the self-assembly of graphene oxides, can effectively prohibit the self-stacking of MXene nanosheets. Meanwhile, the formation of the MXene/rGA interface can strongly trap the Ru3+ ions, resulting in the uniform distribution of Ru nanoclusters within Ru-E-MXene/rGA. The boosted catalytic activity and underlying catalytic mechanism during the HER process are proved by density functional theory. Ru-E-MXene/rGA exhibits overpotentials of 42 and 62 mV at 10 mA cm-2 in alkaline and acidic electrolytes, respectively. The small Tafel slope and charge transfer resistance (Rct) values elucidate its fast dynamic behavior. The cyclic voltammetry (CV) curves and chronoamperometry test confirm the high stability of Ru-E-MXene/rGA. These results demonstrate that coupling Ru nanoclusters with the MXene/rGA heterostructure represents an efficient strategy for constructing MXene-based catalysts with enhanced HER activity.

Crystalline Phase Engineering to Modulate the Interfacial Interaction of the Ruthenium/Molybdenum Carbide for Acidic Hydrogen Evolution

Ruthenium (Ru) is an ideal substitute to commercial Pt/C for the acidic hydrogen evolution reaction (HER), but it still suffers from undesirable activity due to the strong adsorption free energy of H* (ΔGH*). Herein, we propose crystalline phase engineering by loading Ru clusters on precisely prepared cubic and hexagonal molybdenum carbide (α-MoC/β-Mo2C) supports to modulate the interfacial interactions and achieve high HER activity. Advanced spectroscopies demonstrate that Ru on β-Mo2C shows a lower valence state and withdraws more electrons from the support than that of Ru on α-MoC, indicative of a strong interfacial interaction. Density functional theory reveals that the ΔGH* of Ru/β-Mo2C approaches 0 eV, illuminating an enhancement mechanism at the Ru/β-Mo2C interface. The resultant Ru/β-Mo2C exhibits an encouraging performance in a proton exchange membrane water electrolyzer with a low cell voltage (1.58 V@ 1.0 A cm-2) and long stability (500 h@ 1.0 A cm-2).

Hierarchically Structured Graphene Aerogel Supported Nickel-Cobalt Oxide Nanowires as an Efficient Electrocatalyst for Oxygen Evolution Reaction

The rational design of a heterostructure electrocatalyst is an attractive strategy to produce hydrogen energy by electrochemical water splitting. Herein, we have constructed hierarchically structured architectures by immobilizing nickel-cobalt oxide nanowires on/beneath the surface of reduced graphene aerogels (NiCoO2/rGAs) through solvent-thermal and activation treatments. The morphological structure of NiCoO2/rGAs was characterized by microscopic analysis, and the porous structure not only accelerates the electrolyte ion diffusion but also prevents the agglomeration of NiCoO2 nanowires, which is favorable to expose the large surface area and active sites. As further confirmed by the spectroscopic analysis, the tuned surface chemical state can boost the catalytic active sites to show the improved oxygen evolution reaction performance in alkaline electrolytes. Due to the synergistic effect of morphology and composition effect, NiCoO2/rGAs show the overpotential of 258 mV at the current density of 10 mA cm-2. Meanwhile, the small values of the Tafel slope and charge transfer resistance imply that NiCoO2/rGAs own fast kinetic behavior during the OER test. The overlap of CV curves at the initial and 1001st cycles and almost no change in current density after the chronoamperometric (CA) test for 10 h confirm that NiCoO2/rGAs own exceptional catalytic stability in a 1 M KOH electrolyte. This work provides a promising way to fabricate the hierarchically structured nanomaterials as efficient electrocatalysts for hydrogen production.

Hydrogen Spillover Phenomenon at the Interface of Metal-Supported Electrocatalysts for Hydrogen Evolution

ConspectusHydrogen spillover, as a well-known phenomenon for thermal hydrogenation, generally involves the migration of active hydrogen on the surface of metal-supported catalysts. For thermocatalytic hydrogenation, hydrogen spillover generally takes place from metals with superiority for dissociating hydrogen molecules to supports with strong hydrogen adsorption under a H2 environment with high pressures. The former can bring high hydrogen chemical potential to largely reduce the kinetic barrier of the migration of active hydrogen species from metals to supports. At the same time, the latter can make H* migration thermodynamically spontaneous. For these reasons, hydrogen spillover is a common interfacial phenomenon occurring on metal-supported catalysts during thermocatalysis. Recently, this phenomenon has been observed for the exceptionally enhanced electrocatalytic performance for hydrogen evolution and other electrocatalytic organic synthesis. Different from hydrogen spillover for thermocatalysis under high H2 pressure, hydrogen spillover for electrocatalysis involves the migration of active hydrogen species (H*) from metals with strong hydrogen adsorption to supports with weak hydrogen adsorption, thereby suffering from a thermodynamically unfavorable process accompanied by a high kinetic barrier. Thus, the occurrence of hydrogen spillover at the electrocatalytic interface is not easy, and successful cases are rare. Understanding the underlying nature of hydrogen spillover at the electrocatalytic interface of metal-supported catalysts is critical to the rational design of advanced electrocatalysts.In this Account, we provide in-depth insights into recent advances in hydrogen spillover at the electrocatalytic interface for a significantly enhanced hydrogen evolution performance. Electron accumulation at the metal-support interface induces severe interfacial H* trapping and is recognized as the main factor in the failed hydrogen spillover. Given this, we developed two novel strategies to promote the occurrence of hydrogen spillover at the electrocatalytic interface. These strategies include (i) the introduction of ligand environments to enrich the local hydrogen coverage on metals and lower the barrier for interfacial hydrogen spillover and (ii) the minimization of work function difference between metals and supports (ΔΦ) to relieve electron accumulation and lower the kinetic barrier for hydrogen spillover. Also, we summarize the previously reported strategy of shortening the metal-support interface distance to lower the kinetic barrier for interfacial hydrogen spillover. Afterward, some criteria and methodologies are proposed to identify the hydrogen spillover phenomenon at the electrocatalytic interface. Finally, the remaining challenges and future perspectives are also discussed. Based on this Account, we aim to provide new insights into electrocatalysis, particularly the targeted control of hydrogen spillover at the electrocatalytic interface, and then to offer guidelines for the rational design of advanced electrocatalysts.

Dense r-Ru/FeCoP heterointerfaces induced by a defect-assisted strategy for ultrastable alkaline overall water splitting

Simplifying the anchoring process of Ru nanoparticles (NPs) and activating their bifunctional activity are challenges in the construction of Ru-based catalysts. In this work, FeCoP nanosheets anchored by Ru NPs (r-Ru/FeCoP) were innovatively synthesized using an oxygen defect-assisted-gas-phase phosphorization strategy. Surprisingly, the η100 values of r-Ru/FeCoP in the alkaline hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) processes were 0.8 and 0.58 times those of Pt/C and RuO2, respectively. Notably, the rich Ru NPs as HER active sites on r-Ru/FeCoP enhanced the conductivity of the catalyst and promoted the reaction kinetics for HER, while the metal atoms on the FeCoP nanosheets served as OER active sites to accelerate the desorption of O2. The synergy between the two promoted the improvement of overall water splitting efficiency. Overall, this work provides a new approach for the development of low-cost bifunctional catalysts with high Ru utilization.

Manipulating the Microenvironment of Single Atoms by Switching Support Crystallinity for Industrial Hydrogen Evolution

Modulating the microenvironment of single-atom catalysts (SACs) is critical to optimizing catalytic activity. Herein, we innovatively propose a strategy to improve the local reaction environment of Ru single atoms by precisely switching the crystallinity of the support from high crystalline and low crystalline, which significantly improves the hydrogen evolution reaction (HER) activity. The Ru single-atom catalyst anchored on low-crystalline nickel hydroxide (Ru-LC-Ni(OH)2 ) reconstructs the distribution balance of the interfacial ions due to the activation effect of metal dangling bonds on the support. Single-site Ru with a low oxidation state induces the aggregation of hydronium ions (H3 O+ ), leading to the formation of a local acidic microenvironment in alkaline media, breaking the pH-dependent HER activity. As a comparison, the Ru single-atom catalyst anchored on high-crystalline nickel hydroxide (Ru-HC-Ni(OH)2 ) exhibits a sluggish Volmer step and a conventional local reaction environment. As expected, Ru-LC-Ni(OH)2 requires low overpotentials of 9 and 136 mV at 10 and 1000 mA cm-2 in alkaline conditions and operates stably at 500 mA cm-2 for 500 h in an alkaline seawater anion exchange membrane (AEM) electrolyzer. This study provides a new perspective for constructing highly active single-atom electrocatalysts.

Carbon dots tailoring the interfacial proton and charge transfer of iridium nanowires with stress strain for boosting bifunctional hydrogen catalysis

The effective harnessing of hydrogen energy relies on the development of bifunctional electrocatalysts that facilitate hydrogen evolution/oxidation reactions (HER/HOR) with high catalytic activity. The design of such electrocatalysts requires the consideration of not only the volcano relationship with hydrogen binding energy (HBE) or hydrogen adsorption Gibbs free energy (ΔGH) but also the regulation of catalytic kinetics such as interfacial proton/electron transfer. In this work, unique one-dimensional iridium nanowires with compressive stress are successfully prepared and combined with carbon dots (Ir NWs/CDs). Acting as an electrocatalyst for HER in 0.5 M H2SO4, the optimal Ir NWs/CDs only requires an 18 mV overpotential to achieve a current density of -10 mA cm-2. Furthermore, the optimal Ir NWs/CDs shows high HOR performance with a mass activity (@ 50 mV versus RHE) 1.5 times that of 20% Pt/C and excellent anti-CO toxicity ability which is twice the level of the PtRu/C catalyst. Ir NWs/CDs exhibit enhanced HER/HOR activity due to (1) the appropriate modulation of the binding energy to hydrogen intermediate facilitated by the compressive stress applied to the Ir structure and (2) the improved proton/electron transfer kinetics by optimizing the electronic properties and surface structures through tailored CDs. This study delivers a new strategy for designing and synthesizing efficient acidic HER/HOR bifunctional catalysts.

Scalable Synthesis of Ir Cluster Anchored on Porous Hollow Carbon Nanobowls for Enhancing pH-Universal Hydrogen Evolution

Design high-loading with superior activity and high atomic efficiency has consistently been a new frontier of heterogeneous catalysis while challenging in synthetic technology. In this work, a universal solid-state strategy is proposed for large scalable production of high-loading Ir clusters on porous hollow carbon nanobowls (Ir CSs/PHCNBs). The strong electronic interaction between metallic Ir cluster and C on PHCNBs leads to electron redistribution, which significantly improves the electron transfer rate on the interface. The obtained Ir CSs/PHCNBs only require overpotentials of 35, 34, and 37 mV for the hydrogen evolution reaction (HER) with stable outputting of 10 mA cm-2 under acidic, alkaline, and neutral conditions, respectively, which exceeds the state-of-the-art HER electrocatalysts. Meanwhile, the Tafel slopes of Ir CSs/PHCNBs for the HER process are 23.07, 48.76, and 28.95 mV dec-1 , greatly lower than that of PHCNBs (152.73, 227.96, and 140.29 mV dec-1 ) and commercial Pt/C (20%) (36.33, 66.10, and 36.61 mV dec-1 ). These results provide a new strategy for the universal synthesis of clusters catalysts and insight into understanding the interface effects between clusters and carbon substrate, facilitating the industrial application of hydrogen production.

Synergistically engineering of vacancy and doping in thiospinel to boost electrocatalytic oxygen evolution in alkaline water and seawater

Electronic structure engineering lies at the heart of the catalyst design, however, utilizing one strategy to modify the electronic structure is still challenging to achieve optimal electronic states. Herein, an advanced approach that incorporating both Ru dopants and sulfur vacancies into thiospinel-type FeNi2S4 to synergistically modulate the electronic configuration, is proposed. Deep characterizations and theoretical study reveal that the in-situ formed Ni3+ species are real active centers. Ru doping and sulfur vacancies synergistically tune the electronic states of Ni2+ sites to a near-optimal value, leading to the formation of abundant oxygen evolution reaction (OER)-active Ni3+ species via electrochemical reconstruction. Consequently, the optimized Ru-FeNi2S4 catalyst can exhibit superb electrocatalytic performance towards OER, delivering the overpotentials of 253 mV and 340.8 mV at 10 mA·cm-2 in alkaline water and seawater, respectively. The proper combination of vacancy and heteroatom doping in this work may unlock the catalytic power of conventional catalysts toward electrochemical reactions.

Metal ion assistant transformation strategy to synthesize catechol-based metal-organic frameworks from Ti3C2Tx precursors

Chemical transformation strategy is capable of fabricating nanomaterials with well-defined structures and fascinating performance via controllable crystallization kinetics in the phase transformation. V2CTx MXene has been used as precursors to fabricate vanadium porphyrin metal-organic frameworks (V-PMOFs) via the coordination of deprotonated carboxylic acid ligands. However, the rational and in-depth exploration of synthesis mechanism with the aim of enriching the variety of MXene (i.e., Ti3C2Tx) and organic ligands (i.e., catechol-based) to design new MOFs is rarely reported. Herein, we have first developed a metal ion assistant transformation strategy to synthesize three-dimensional catechol-based TiCu-HHTP (HHTP = 2,3,6,7,10,11-hexahydroxytriphenylene) MOFs with a non-interpenetrating SrSi2 (srs) framework using two-dimensional Ti3C2Tx as precursors. The unique synergetic transformation mechanism involves the electron transfer from Ti3C2Tx to electrostatically adsorbed Cu2+ ion for redox reaction, the subsequent Ti-C bond rupture for Ti4+ ion release, and the continuous chelation coordination between Ti4+/Cu2+ and HHTP. Ti3C2Tx precursors and auxiliary metal ion could be rationally substituted by V2CTx and Mn+ (e.g., Ni2+, Co2+, Mn2+, and Zn2+), respectively. This strategy lays the foundation for the design and synthesis of innovative and multifarious MOFs derived from MXene or other unconventional metal precursors.

(FeMnCe)-co-doped MOF-74 with significantly improved performance for overall water splitting

Developing inexpensive electrocatalysts with high activity and stability is of great value for overall water splitting. In this work, we designed a series of 3d-4f (FeMnCe)-trimetallic MOF-74 with different ratios of 3d- and 4f-metal centers. Among them, FeMn6Ce0.5-MOF-74/NF exhibited the best electrocatalytic performance for the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in an alkaline solution. It only requires a low overpotential of 281 mV@100 mA cm-2 for OER and 186 mV@-10 mA cm-2 for HER in 1 M KOH. With FeMn6Ce0.5-MOF-74/NF as the anode and cathode in the overall water splitting system, only 1.65 V is needed to deliver a current density of 10 mA cm-2. In particular, for the as-fabricated FeMn6Ce0.5-MOF-74/NF||Pt/C cell unit, only 1.40 V is needed to achieve 10 mA cm-2. Therefore, the successful design of 3d-4f mixed-metallic MOF-74 provides a new viewpoint to develop highly efficient non-precious metal electrocatalysts.