[K2 PbX][Ga7 S12 ] (X = Cl, Br, I): The First Lead-Containing Cationic Moieties with Ultrahigh Second-Harmonic Generation and Band Gaps Exceeding the Criterion of 2.33 eV

EuSi7P10: An Inorganic Supramolecular Nonlinear Optical Crystal Exhibiting Strong Second-Harmonic Generation Response

Inorganic supramolecular compounds are the emergent class of infrared (IR) nonlinear optical (NLO) materials. However, the reported inorganic supramolecular IR NLO pnictides are still scarce. In this work, a new inorganic supramolecular IR NLO phosphide, EuSi7P10, has been synthesized using the metal salt flux method. The structure of EuSi7P10 features an anionic host framework containing the oriented [Si7P16] dual-T2 supertetrahedra with the guest Eu2+ cations filling in the intervals. Additionally, EuSi7P10 exhibits strong phase-matched (PM) second-harmonic generation (SHG) (4.0 × AgGaS2), large birefringence (0.087 @2050 nm), and wide infrared transparency. This study highlights the potential of inorganic supramolecular pnictides for exploring high-performance IR NLO crystals.

Wide band gap selenide infrared nonlinear optical materials AIIMg6Ga6Se16 with strong SHG responses and high laser-induced damage thresholds

Infrared (IR) nonlinear optical (NLO) materials with strong NLO response, wide band gap and high laser-induced damage threshold (LIDT) are highly expected in current laser technologies. Herein, by introducing double alkaline-earth metal (AEM) atoms, three wide band gap selenide IR NLO materials AIIMg6Ga6Se16 (AII = Ca, Sr, Ba) with excellent linear and NLO optical properties have been rationally designed and fabricated. AIIMg6Ga6Se16 (AII = Ca, Sr, Ba) are composed of unique [AIISe6] triangular prisms, [MgSe6] octahedra and [GaSe4] tetrahedra. The introduction of double AEMs effectively broadens the band gaps of selenide-based IR NLO materials. Among them, CaMg6Ga6Se16, achieving the best balance between the second-harmonic generation response (∼1.5 × AgGaS2), wide band gap (2.71 eV), high LIDT (∼9 × AgGaS2), and moderate birefringence of 0.052 @ 1064 nm, is a promising NLO candidate for high power IR laser. Theoretical calculations indicate that the NLO responses and band gaps among the three compounds are mainly determined by the NLO-active [GaSe4] units. The results enrich the chemical diversity of chalcogenides, and give some insight into the design of new functional materials based on the rare [AIISe6] prismatic units.

AIB3 IIC2 IIIQ6 VIXVII: A Thioborate Halide Family for Developing Wide Bandgap Infrared Nonlinear Materials by Coupling Planar [BS3] and Polycations

Developing high-performance infrared (IR) nonlinear optical (NLO) materials is urgent but challenging due to the competition between NLO coefficient and bandgap in one compound. Herein, by coupling NLO-active [BS3] planar units and halide-centered polycations, six new metal thioborate halides ABa3B2S6X (A = Rb, Cs; X = Cl, Br, I) composed of zero-dimensional [XBamRbn/Csn] polycations and [BS3] units, belonging to a newA I B 3 II C 2 III Q 6 VI X VII ${\mathrm{A}}^{\mathrm{I}}{\mathrm{B}}_{3}^{\mathrm{II}}{\mathrm{C}}_{2}^{\mathrm{III}}{\mathrm{Q}}_{6}^{\mathrm{VI}}{\mathrm{X}}^{\mathrm{VII}}$ family, are rationally designed and fabricated. The compounds show an interesting structural transition from Pbcn (ABa3B2S6Cl) to Cmc21 (ABa3B2S6Br and ABa3B2S6I) driven by the clamping effect of polycationic frameworks. ABa3B2S6Br and ABa3B2S6I are the first series metal thioborate halide IR NLO materials, and the introduction of [BS3] unit effectively widens the bandgap of planar unit-constructed chalcogenides. ABa3B2S6Br and ABa3B2S6I, exhibiting wide bandgaps (3.55-3.60 eV), high laser-induced damage thresholds (≈ 6 × AgGaS2), and strong SHG effects (0.5-0.6 × AgGaS2) with phase-matching behaviors, are the promising IR NLO candidates for high-power laser applications. The results enrich the chemical and structural diversity of boron chemistry and give some insights into the design of new IR NLO materials with planar units.

Molecular Crystals Constructed by Polar Molecular Cages: A Promising System for Exploring High-performance Infrared Nonlinear Optical Crystals

Polar molecular crystals, with their densely stacked polar nonlinear optical (NLO) active units, are favored for their large second harmonic generation (SHG) responses and birefringence. However, their potential for practical applications as Infrared (IR) NLO materials has historically been underappreciated due to the weak inter-molecular interaction forces that may compromise their physicochemical properties. In this study, we propose molecular crystals with polar molecular cages as a treasure-house for the development of superior IR NLO materials and a representative system, binary chalcogenide molecular crystals, composed of [P4 Sn ] (n=3-9) polar molecular cages, is introduced. These crystals may not only achieve wide band gap, large SHG response, and birefringence in a single structure, but also exhibit favorable physicochemical properties. We subsequently obtained a polar molecular crystal, α-P4 S5 , which demonstrated exceptional IR optical properties, including a strong SHG response (1.1×AGS), wide band gap (3.02 eV), large birefringence (0.134@2050 nm), and a broad transmission range (0.41-14.7 μm). Moreover, it showed excellent water resistance and hardness. These findings highlight the potential of polar molecular crystals as a promising platform for the development of high-performance IR NLO materials.

Excellent Nonlinear Optical M[M4 Cl][Ga11 S20 ] (M = A/Ba, A = K, Rb) Achieved by Unusual Cationic Substitution Strategy

The typical chalcopyrite AgGaQ2 (Q = S, Se) are commercial infrared (IR) second-order nonlinear optical (NLO) materials; however, they suffer from unexpected laser-induced damage thresholds (LIDTs) primairy due to their narrow band gaps. Herein, what sets this apart from previously reported chemical substitutions is the utilization of an unusual cationic substitution strategy, represented by [[SZn4 ]S12 + [S4 Zn13 ]S24 + 11ZnS4 ⇒ MS12 + [M4 Cl]S24 + 11GaS4 ], in which the covalent Sx Zny units in the diamond-like sphalerite ZnS are synergistically replaced by cationic Mx Cly units, resulting in two novel salt-inclusion sulfides, M[M4 Cl][Ga11 S20 ] (M = A/Ba, A = K, 1; Rb, 2). As expected, the introduction of mixed cations in the GaS4 anionic frameworks of 1 and 2 leads to wide band gaps (3.04 and 3.01 eV), which exceeds the value of AgGaS2 , facilitating the improvement of high LIDTs (9.4 and 10.3 × AgGaS2 @1.06 µm, respectively). Furthermore, compounds 1 and 2 exhibit moderate second-harmonic generation intensities (0.84 and 0.78 × AgGaS2 @2.9 µm, respectively), mainly originating from the orderly packing tetrahedral GaS4 units. Importantly, this study demonstrates the successful application of the cationic substitution strategy based on diamond-like structures to provide a feasible chemical design insight for constructing high-performance NLO materials.

Ln2 F2 (OH2 )(MoO3 )2 (SeO3 )2 : Promising Multifunctional Nonlinear Optical Materials Created by Partial Fluorination Strategy under Corrosion Resistant Supercritical Reactions

It has historically been exceedingly challenging to create physically and chemically stable lanthanide compounds with strong second harmonic generation (SHG) due to their strong preference to central symmetry. In this work, five new non-centrosymmetric lanthanide selenites, namely, Ln2 F2 (OH2 )(MoO3 )2 (SeO3 )2 (Ln = Sm, Eu, Gd, Tb and Dy), are achieved by partial fluorination of the lanthanide oxygen polyhedron. An HF corrosion resistant supercritical hydrothermal method is developed, which is a facile and universal method for HF corrosion and high-temperature high-pressure environment. The title compounds displayed a novel 3D framework composed of 1D molybdenum selenite chains bridged by Ln2 F2 O12 (OH2 ) dimers. Their powder SHG responses showed a large difference, ranging from 1.0 to 9.0 × KH2 PO4 (KDP) at 1064 nm. The half-filled Gd compound exhibited very strong SHG efficiency of up to 1.2 × KTP (KTiOPO4 ) at 2050 nm. Compounds Tb and Gd are the first lanthanide selenites with SHG intensity reaching KTP level, which is very rare in this system. Furthermore, these compounds can also possess excellent physicochemical stability and strong luminescence emission, indicating that they are promising multifunctional nonlinear optical materials. This work offered an effective way for design and synthesis of multifunctional and high-performant nonlinear optical materials.

Cs4 Zn5 P6 S18 I2 : the Largest Birefringence in Chalcohalide Achieved by Highly Polarizable Nonlinear Optical Functional Motifs

Chalcohalides not only keep the balance between the nonlinear optical (NLO) coefficient and wide band gap, but also provide a promising solution to achieve sufficient birefringence for phase-matching ability in NLO crystals. In this study, a novel chalcohalide, Cs4 Zn5 P6 S18 I2 (1) is successfully synthesized, by incorporating the highly electropositive Cs and the large electronegative I element into the zinc thiophosphate. Its 3D open framework features an edge-shared by distorted [ZnS4 ], ethanol-like [P2 S6 ], and unusual [ZnS2 I2 ] polyhedrons, which is inconsistent with the soft-hard-acids-bases theory. Remarkably, compound 1 simultaneously exhibits the large second-harmonic generation (SHG, 1.1×AgGaS2 , @1.3 µm) and a wide band gap (3.75 eV) toward a high laser-induced damage threshold (16.7×AgGaS2 , @1.06 µm), satisfying the rigorous requirements for a prominent infrared NLO material with concurrent SHG intensity (≥0.5×AGS) and band gap (≥3.5 eV). Moreover, to the best of the knowledge, the experimental result shows that phase 1 has the largest birefringence (0.108, @546 nm) in chalcohalide and meets phase-matching behavior demand originating from the polarizable anisotropy of NLO-functional motifs. This finding may provide great opportunities for designing birefringent chalcohalides.

[Ba4X][In19S32] (X = Cl, Br): two quaternary metal chalcohalides exhibiting remarkable photocurrent responses

Inorganic metal chalcohalides, as significant semiconductor materials, have emerged as promising candidates for photoelectric applications. Herein, a new type of quaternary chalcohalide, [Ba4X][In19S32] (X = Cl, Br), has been discovered using the high-temperature halide salt flux method. Single-crystal X-ray diffraction analysis reveals that they are isostructural and crystallize in the tetragonal space group I41/amd (no. 141) featuring the octahedral hole formed by six [InS4]5- tetrahedra filled with a [ClBa4]7+ polycation, surrounded by a three-dimensional covalent framework formed by interconnecting [InS6]9- octahedra through corner-sharing and edge-sharing. Moreover, [Ba4Cl][In19S32] and [Ba4Br][In19S32] exhibit wide optical bandgaps of 2.70 eV and 2.46 eV, respectively, and moderate birefringences (0.044 @ 2100 nm and 0.042 @ 2100 nm, respectively). Specifically, [Ba4X][In19S32] (X = Cl, Br) display remarkable photocurrent responses under simulated solar-light illumination, implying their potential for photocatalytic applications. Theoretical calculations were employed to understand the interrelationship between the optical properties and electronic structure. The study on the synthesis and structure-property relationship analysis of inorganic metal chalcohalides provides new insight into the exploration of promising photoelectric materials.

MB3P2S10 (M = Rb, Cs): two new alkali metal thioboratephosphates with [B6P4S20] T3-supertetrahedra

Two new alkaline metal thioboratephosphates, RbB3P2S10 and CsB3P2S10, have been designed and fabricated by the flux method. The two compounds are composed of alkali metal polyhedral and [B6P4S20] T3-supertetrahedral units, and crystallize in I41/a and R3̄c space groups, respectively. The results enrich the chemical diversity of chalcogenides, and give insights for the exploration of new functional materials in thioboratephosphates.