Selective Ethylene Glycol Oxidation to Formate on Nickel Selenide with Simultaneous Evolution of Hydrogen

From Ethylene Glycol to Glycolic Acid: Electrocatalytic Conversion on Pt-Group Metal Surfaces

Ethylene glycol (EG) is one of the most attractive platform molecules derived from biomass and waste plastics. Thus, the selective electrooxidation of ethylene glycol (EGOR) into value-added chemicals (especially glycolic acid (GA)) can promote its recycling and upgrading. However, the understanding of the EG-to-GA process on Pt-group metal (PGM) electrodes is far limited now. It has been shown that the Pt and Pd electrodes could show considerable EGOR activity but not Rh and Ir electrodes. Meanwhile, EGOR mainly produces the glycolate, oxalate, and formate on Pt and Pd electrodes, whereas it can obtain minute amounts of glycolate and oxalate on Rh and Ir electrodes. Impressively, the selectivity of glycolate on Pt and Pd electrodes can be over 85% (apparent Faradaic efficiency) in alkaline media, although the stability should be further improved through interfacial tuning and/or engineering. This work might deepen the fundamental understanding of the EGOR process on the nature of PGM electrodes.

Enhanced Oxygen Evolution and Zinc-Air Battery Performance via Electronic Spin Modulation in Heterostructured Catalysts

Beyond optimizing electronic energy levels, the modulation of the electronic spin configuration is an effective strategy, often overlooked, to boost activity and selectivity in a range of catalytic reactions, including the oxygen evolution reaction (OER). This electronic spin modulation is frequently accomplished using external magnetic fields, which makes it impractical for real applications. Herein, spin modulation is achieved by engineering Ni/MnFe2O4 heterojunctions, whose surface is reconstructed into NiOOH/MnFeOOH during the OER. NiOOH/MnFeOOH shows a high spin state of Ni, which regulates the OH- and O2 adsorption energy and enables spin alignment of oxygen intermediates. As a result, NiOOH/MnFeOOH electrocatalysts provide excellent OER performance with an overpotential of 261 mV at 10 mA cm-2. Besides, rechargeable zinc-air batteries based on Ni/MnFe2O4 show a high open circuit potential of 1.56 V and excellent stability for more than 1000 cycles. This outstanding performance is rationalized using density functional theory calculations, which show that the optimal spin state of both Ni active sites and oxygen intermediates facilitates spin-selected charge transport, optimizes the reaction kinetics, and decreases the energy barrier to the evolution of oxygen. This study provides valuable insight into spin polarization modulation by heterojunctions enabling the design of next-generation OER catalysts with boosted performance.

Selective lactic acid synthesis via ethylene glycol electrooxidation in borate buffer

Efficient and selective oxidation of ethylene glycol is challenging due to uncontrollable C-C bond cleavage. We propose an electrochemical strategy for the selective electrooxidation of ethylene glycol to sythesise lactic acid on a Ni-based electrocatalyst by controlling the pH value of the electrolyte solution.

Mining the Carbon Intermediates in Plastic Waste Upcycling for Constructing C-S Bond

Postconsumer plastics are generally perceived as valueless with only a small portion of plastic waste being closed-loop recycled into similar products while most of them are discarded in landfills. Depositing plastic waste in landfills not only harms the environment but also signifies a substantial economic loss. Alternatively, constructing value-added chemical feedstocks via mining the waste-derived intermediate species as a carbon (C) source under mild electrochemical conditions is a sustainable strategy to realize the circular economy. This proof-of-concept work provides an attractive "turning trash to treasure" strategy by integrating electrocatalytic polyethylene terephthalate (PET) plastic upcycling with a chemical C-S coupling reaction to synthesize organosulfur compounds, hydroxymethanesulfonate (HMS). HMS can be produced efficiently (Faradaic efficiency, FE of ∼70%) via deliberately capturing electrophilic intermediates generated in the PET monomer (ethylene glycol, EG) upcycling process, followed by coupling them with nucleophilic sulfur (S) species (i.e., SO32- and HSO3-). Unlike many previous studies conducted under alkaline conditions, PET upcycling was performed over an amorphous MnO2 catalyst under near-neutral conditions, allowing for the stabilization of electrophilic intermediates. The compatibility of this strategy was further investigated by employing biomass-derived compounds as substrates. Moreover, comparable HMS yields can be achieved with real-world PET plastics, showing its enormous potential in practical application. Lastly, Density function theory (DFT) calculation reveals that the C-C cleavage step of EG is the rate-determining step (RDS), and amorphous MnO2 significantly decreases the energy barriers for both RDS and C-S coupling when compared to the crystalline counterpart.

Enhanced H2 production assisted by anodic iodide oxidation using transparent tin oxide-based electrodes

In this work, the direct use of transparent conducting oxides (TCOs) as cost-efficient anodes for the iodide oxidation reaction (IOR) is explored. Energy-saving hydrogen production assisted by the IOR is demonstrated using a hybrid water electrolysis system with FTO as the anode and Pt-wire as the cathode. The hybrid system delivers 10 mA cm-2 at a cell voltage as low as 1.15 V with the faradaic efficiency for H2 found to be ∼91%. This study may open avenues for developing novel systems that integrate the IOR with other high-value reduction reactions.

Unveiling the Pivotal Role of dx2-y2 Electronic States in Nickel-Based Hydroxide Electrocatalysts for Methanol Oxidation

The anodic methanol oxidation reaction (MOR) plays a crucial role in coupling with the cathodic hydrogen evolution reaction (HER) and enables the sustainable production of the high-valued formate. Nickel-based hydroxide (Ni(OH)2) as MOR electrocatalyst has attracted enormous attention. However, the key factor determining the intrinsic catalytic activity remains unknown, which significantly hinders the further development of Ni(OH)2 electrocatalyst. Here, we found that thed x 2 - y 2 ${{d}_{{x}^{2}-{y}^{2}}}$ electronic state within antibonding bands plays a decisive role in the whole MOR process. The onset potential depends on the deprotonation ability (Ni2+ to Ni3+), which was closely related to the band center ofd x 2 - y 2 ${{d}_{{x}^{2}-{y}^{2}}}$ orbital. The closer ofd x 2 - y 2 ${{d}_{{x}^{2}-{y}^{2}}}$ orbital to the Fermi level showed the stronger the deprotonation ability. Meanwhile, in the high potential region, the broadening ofd x 2 - y 2 ${{d}_{{x}^{2}-{y}^{2}}}$ orbital would facilitate the electron transfer from methanol to catalysts (Ni3+ to Ni2+), further enhancing the catalytic properties. Our work for the first time clarifies the intrinsic relationship betweend x 2 - y 2 ${{d}_{{x}^{2}-{y}^{2}}}$ electronic state and the MOR activities, which adds a new layer of understanding to the methanol electrooxidation research scene.

Advancing BiVO4 Photoanode Activity for Ethylene Glycol Oxidation via Strategic pH Control

The photoelectrochemical (PEC) conversion of organic small molecules offers a dual benefit of synthesizing value-added chemicals and concurrently producing hydrogen (H2). Ethylene glycol, with its dual hydroxyl groups, stands out as a versatile organic substrate capable of yielding various C1 and C2 chemicals. In this study, we demonstrate that pH modulation markedly enhances the photocurrent of BiVO4 photoanodes, thus facilitating the efficient oxidation of ethylene glycol while simultaneously generating H2. Our findings reveal that in a pH = 1 ethylene glycol solution, the photocurrent density at 1.23 V vs. RHE can attain an impressive 7.1 mA cm-2, significantly surpassing the outputs in neutral and highly alkaline environments. The increase in photocurrent is attributed to the augmented adsorption of ethylene glycol on BiVO4 under acidic conditions, which in turn elevates the activity of the oxidation reaction, culminating in the maximal production of formic acid. This investigation sheds light on the pivotal role of electrolyte pH in the PEC oxidation process and underscores the potential of the PEC strategy for biomass valorization into value-added products alongside H2 fuel generation.

Electronic Spin Alignment within Homologous NiS2/NiSe2 Heterostructures to Promote Sulfur Redox Kinetics in Lithium-Sulfur Batteries

The catalytic activation of the Li-S reaction is fundamental to maximize the capacity and stability of Li-S batteries (LSBs). Current research on Li-S catalysts mainly focuses on optimizing the energy levels to promote adsorption and catalytic conversion, while frequently overlooking the electronic spin state influence on charge transfer and orbital interactions. Here, hollow NiS2/NiSe2 heterostructures encapsulated in a nitrogen-doped carbon matrix (NiS2/NiSe2@NC) are synthesized and used as a catalytic additive in sulfur cathodes. The NiS2/NiSe2 heterostructure promotes the spin splitting of the 3d orbital, driving the Ni3+ transformation from low to high spin. This high spin configuration raises the electronic energy level and activates the electronic state. This accelerates the charge transfer and optimizes the adsorption energy, lowering the reaction energy barrier of the polysulfides conversion. Benefiting from these characteristics, LSBs based on NiS2/NiSe2@NC/S cathodes exhibit high initial capacity (1458 mAh·g⁻1 at 0.1C), excellent rate capability (572 mAh·g⁻1 at 5C), and stable cycling with an average capacity decay rate of only 0.025% per cycle at 1C during 500 cycles. Even at high sulfur loadings (6.2 mg·cm⁻2), high initial capacities of 1173 mAh·g⁻1 (7.27 mAh·cm⁻2) are measured at 0.1C, and 1058 mAh·g⁻1 is retained after 300 cycles.

Nickel foam supported Mn-doped NiFe-LDH nanosheet arrays as efficient bifunctional electrocatalysts for methanol oxidation and hydrogen evolution

Electrochemical upgrading methanol into value-added formate at the anode in alkaline media enables the boosting production of hydrogen fuel at the cathode with saved energy. To achieve such a cost-effective and efficient electrocatalytic process, herein this work presents a Mn-doped nickel iron layered double hydroxides supported on nickel foam, derived from a simple hydrothermal synthesis. This developed electrocatalyst could act as an efficient bifunctional electrocatalyst for methanol-to-formate with a high faradaic efficiency of nearly 100 %, and for hydrogen evolution reaction, at an external potential of 1.5 V versus reversible hydrogen electrode. Additionally, a current density of 131.1 mA cm-2 with a decay of merely 12.2 % over 120 h continuous long-term testing was generated in co-electrocatalysis of water/methanol solution. Further density functional theoretical calculations were used to unravel the methanol-to-formate reaction mechanism arising from the doping of Fe and/or Mn. This work offers a good example of co-electrocatalysis to produce formate and green hydrogen fuel using a bifunctional electrocatalyst.

Photovoltaic-driven Ni(ii)/Ni(iii) redox mediator for the valorization of PET plastic waste with hydrogen production

Electrocatalytic valorization of PET plastic waste provides an appealing route by converting intermittent renewable energy into valuable chemicals and high-energy fuels. Normally, anodic PET hydrolysate oxidation and cathodic water reduction reactions occur simultaneously in the same time and space, which increases the challenges for product separation and operational conditions. Although these problems can be addressed by utilizing membranes or diaphragms, the parasitic cell resistance and high overall cost severely restrict their future application. Herein, we introduce a Ni(ii)/Ni(iii) redox mediator to decouple these reactions into two independent processes: an electrochemical process for water reduction to produce hydrogen fuel assisted by the oxidation of the Ni(OH)2 electrode into the NiOOH counterpart, followed subsequently by a spontaneous chemical process for the valorization of PET hydrolysate to produce formic acid with a high faradaic efficiency of ∼96% by the oxidized NiOOH electrode. This decoupling strategy enables the electrochemical valorization of PET plastic waste in a membrane-free system to produce high-value formic acid and high-purity hydrogen production. This study provides an appealing route to facilitate the transformation process of PET plastic waste into high-value products with high efficiency, low cost and high purity.

Iodide-assisted energy-saving hydrogen production using self-supported sulfate ion-modified NiFe(oxy)hydroxide nanosheets

Hybrid water electrolysis (HyWES) with iodide oxidation as non-OER for energy-saving H2 production is demonstrated using self-supported sulfate ion modified Ni,Fe(oxy)hydroxide as the anode. The sulfate ions adsorbed on the catalyst show a promoting effect in achieving high electrochemical activity. The HyWES requires a voltage as low as 1.36 V to achieve the bechmark current density of 10 mA cm-2.

Hydrogen Production via Electrolysis of Wastewater

The high energy consumption of traditional water splitting to produce hydrogen is mainly due to complex oxygen evolution reaction (OER), where low-economic-value O2 gas is generated. Meanwhile, cogeneration of H2 and O2 may result in the formation of an explosive H2/O2 gas mixture due to gas crossover. Considering these factors, a favorable anodic oxidation reaction is employed to replace OER, which not only reduces the voltage for H2 production at the cathode and avoids H2/O2 gas mixture but also generates value-added products at the anode. In recent years, this innovative strategy that combines anodic oxidation for H2 production has received intensive attention in the field of electrocatalysis. In this review, the latest research progress of a coupled hydrogen production system with pollutant degradation/upgrading is systematically introduced. Firstly, wastewater purification via anodic reaction, which produces free radicals instead of OER for pollutant degradation, is systematically presented. Then, the coupled system that allows for pollutant refining into high-value-added products combined with hydrogen production is displayed. Thirdly, the photoelectrical system for pollutant degradation and upgrade are briefly introduced. Finally, this review also discusses the challenges and future perspectives of this coupled system.

Mesoporous Mo-doped PtBi intermetallic metallene superstructures to enable the complete electrooxidation of ethylene glycol

Metallenes, intermetallic compounds, and porous nanocrystals are the three types of most promising advanced nanomaterials for practical fuel cell devices, but how to integrate the three structural features into a single nanocrystal remains a huge challenge. Herein, we report an efficient one-step method to construct freestanding mesoporous Mo-doped PtBi intermetallic metallene superstructures (denoted M-PtBiMo IMSs) as highly active and stable ethylene glycol oxidation reaction (EGOR) catalysts. The materials retained their catalytic performance, even in complex direct ethylene glycol fuel cells (DEGFCs). The M-PtBiMo IMSs showed EGOR mass and specific activities of 24.0 A mgPt-1 and 61.1 mA cm-2, respectively, which were both dramatically higher than those of benchmark Pt black and Pt/C. In situ infrared spectra showed that ethylene glycol underwent complete oxidation via a 10-electron CO-free pathway over the M-PtBiMo IMSs. Impressively, M-PtBiMo IMSs demonstrated a much higher power density (173.6 mW cm-2) and stability than Pt/C in DEGFCs. Density functional theory calculations revealed that oxophilic Mo species promoted the EGOR kinetics. This work provides new possibilities for designing advanced Pt-based nanomaterials to improve DEGFC performance.

Corrosion Engineering of Part-Per-Million Single Atom Pt1/Ni(OH)2 Electrocatalyst for PET Upcycling at Ampere-Level Current Density

The plastic waste issue has posed a series of formidable challenges for the ecological environment and human health. While conventional recycling strategies often lead to plastic down-cycling, the electrochemical strategy of recovering valuable monomers enables an ideal, circular plastic economy. Here a corrosion synthesized single atom Pt1/Ni(OH)2 electrocatalyst with part-per-million noble Pt loading for highly efficient and selective upcycling of polyethylene terephthalate (PET) into valuable chemicals (potassium diformate and terephthalic acid) and green hydrogen is reported. Electro-oxidation of PET hydrolysate, ethylene glycol (EG), to formate is processed with high Faraday efficiency (FE) and selectivity (>90%) at the current density close to 1000 mA cm-2 (1.444 V vs RHE). The in situ spectroscopy and density functional theory calculations provide insights into the mechanism and the understanding of the high efficiency. Remarkably, the electro-oxidation of EG at the ampere-level current density is also successfully illustrated by using a membrane-electrode assembly with high FEs to formate integrated with hydrogen production for 500 h of continuous operation. This process allows valuable chemical production at high space-time yield and is highly profitable (588-700 $ ton-1 PET), showing an industrial perspective on single-atom catalysis of electrochemical plastic upcycling.

Enhanced Electrochemical Hydrogenation of Benzaldehyde to Benzyl Alcohol on Pd@Ni-MOF by Modifying the Adsorption Configuration

Electrocatalytic hydrogenation (ECH) approaches under ambient temperature and pressure offer significant potential advantages over thermal hydrogenation processes but require highly active and efficient hydrogenation electrocatalysts. The performance of such hydrogenation electrocatalysts strongly depends not only on the active phase but also on the architecture and surface chemistry of the support material. Herein, Pd nanoparticles supported on a nickel metal-organic framework (MOF), Ni-MOF-74, are prepared, and their activity toward the ECH of benzaldehyde (BZH) in a 3 M acetate (pH 5.2) aqueous electrolyte is explored. An outstanding ECH rate up to 283 μmol cm-2 h-1 with a Faradaic efficiency (FE) of 76% is reached. Besides, higher FEs of up to 96% are achieved using a step-function voltage. Materials Studio and density functional theory calculations show these outstanding performances to be associated with the Ni-MOF support that promotes H-bond formation, facilitates water desorption, and induces favorable tilted BZH adsorption on the surface of the Pd nanoparticles. In this configuration, BZH is bonded to the Pd surface by the carbonyl group rather than through the aromatic ring, thus reducing the energy barriers of the elemental reaction steps and increasing the overall reaction efficiency.

Strain and Shell Thickness Engineering in Pd3 Pb@Pt Bifunctional Electrocatalyst for Ethanol Upgrading Coupled with Hydrogen Production

The ethanol oxidation reaction (EOR) is an attractive alternative to the sluggish oxygen evolution reaction in electrochemical hydrogen evolution cells. However, the development of high-performance bifunctional electrocatalysts for both EOR and hydrogen evolution reaction (HER) is a major challenge. Herein, the synthesis of Pd3 Pb@Pt core-shell nanocubes with controlled shell thickness by Pt-seeded epitaxial growth on intermetallic Pd3 Pb cores is reported. The lattice mismatch between the Pd3 Pb core and the Pt shell leads to the expansion of the Pt lattice. The synergistic effects between the tensile strain and the core-shell structures result in excellent electrocatalytic performance of Pd3 Pb@Pt catalysts for both EOR and HER. In particular, Pd3 Pb@Pt with three Pt atomic layers shows a mass activity of 8.60 A mg-1 Pd+Pt for ethanol upgrading to acetic acid and close to 100% of Faradic efficiency for HER. An EOR/HER electrolysis system is assembled using Pd3 Pb@Pt for both the anode and cathode, and it is shown that low cell voltage of 0.75 V is required to reach a current density of 10 mA cm-2 . The present work offers a promising strategy for the development of bifunctional catalysts for hybrid electrocatalytic reactions and beyond.

Band Engineering Through Pb-Doping of Nanocrystal Building Blocks to Enhance Thermoelectric Performance in Cu3 SbSe4

Developing cost-effective and high-performance thermoelectric (TE) materials to assemble efficient TE devices presents a multitude of challenges and opportunities. Cu3 SbSe4 is a promising p-type TE material based on relatively earth abundant elements. However, the challenge lies in its poor electrical conductivity. Herein, an efficient and scalable solution-based approach is developed to synthesize high-quality Cu3 SbSe4 nanocrystals doped with Pb at the Sb site. After ligand displacement and annealing treatments, the dried powders are consolidated into dense pellets, and their TE properties are investigated. Pb doping effectively increases the charge carrier concentration, resulting in a significant increase in electrical conductivity, while the Seebeck coefficients remain consistently high. The calculated band structure shows that Pb doping induces band convergence, thereby increasing the effective mass. Furthermore, the large ionic radius of Pb2+ results in the generation of additional point and plane defects and interphases, dramatically enhancing phonon scattering, which significantly decreases the lattice thermal conductivity at high temperatures. Overall, a maximum figure of merit (zTmax ) ≈ 0.85 at 653 K is obtained in Cu3 Sb0.97 Pb0.03 Se4 . This represents a 1.6-fold increase compared to the undoped sample and exceeds most doped Cu3 SbSe4 -based materials produced by solid-state, demonstrating advantages of versatility and cost-effectiveness using a solution-based technology.

Nanostructured Li2S Cathodes for Silicon-Sulfur Batteries

Lithium-sulfur batteries are regarded as an advantageous option for meeting the growing demand for high-energy-density storage, but their commercialization relies on solving the current limitations of both sulfur cathodes and lithium metal anodes. In this scenario, the implementation of lithium sulfide (Li2S) cathodes compatible with alternative anode materials such as silicon has the potential to alleviate the safety concerns associated with lithium metal. In this direction, here, we report a sulfur cathode based on Li2S nanocrystals grown on a catalytic host consisting of CoFeP nanoparticles supported on tubular carbon nitride. Nanosized Li2S is incorporated into the host by a scalable liquid infiltration-evaporation method. Theoretical calculations and experimental results demonstrate that the CoFeP-CN composite can boost the polysulfide adsorption/conversion reaction kinetics and strongly reduce the initial overpotential activation barrier by stretching the Li-S bonds of Li2S. Besides, the ultrasmall size of the Li2S particles in the Li2S-CoFeP-CN composite cathode facilitates the initial activation. Overall, the Li2S-CoFeP-CN electrodes exhibit a low activation barrier of 2.56 V, a high initial capacity of 991 mA h gLi2S-1, and outstanding cyclability with a small fading rate of 0.029% per cycle over 800 cycles. Moreover, Si/Li2S full cells are assembled using the nanostructured Li2S-CoFeP-CN cathode and a prelithiated anode based on graphite-supported silicon nanowires. These Si/Li2S cells demonstrate high initial discharge capacities above 900 mA h gLi2S-1 and good cyclability with a capacity fading rate of 0.28% per cycle over 150 cycles.

Modification Strategies for Development of 2D Material-Based Electrocatalysts for Alcohol Oxidation Reaction

2D materials, such as graphene, MXenes (metal carbides and nitrides), graphdiyne (GDY), layered double hydroxides, and black phosphorus, are widely used as electrocatalyst supports for alcohol oxidation reactions (AORs) owing to their large surface area and unique 2D charge transport channels. Furthermore, the development of highly efficient electrocatalysts for AORs via tuning the structure of 2D support materials has recently become a hot area. This article provides a critical review on modification strategies to develop 2D material-based electrocatalysts for AOR. First, the principles and influencing factors of electrocatalytic oxidation of alcohols (such as methanol and ethanol) are introduced. Second, surface molecular functionalization, heteroatom doping, and composite hybridization are deeply discussed as the modification strategies to improve 2D material catalyst supports for AORs. Finally, the challenges and perspectives of 2D material-based electrocatalysts for AORs are outlined. This review will promote further efforts in the development of electrocatalysts for AORs.

Length-tunable Pd2Sn@Pt core-shell nanorods for enhanced ethanol electrooxidation with concurrent hydrogen production

The electrooxidation of ethanol as an alternative to the oxygen evolution reaction presents a promising approach for low-cost hydrogen production. However, the design and synthesis of efficient ethanol oxidation electrocatalysts remain key challenges. Here, a colloidal procedure is developed to prepare Pd2Sn@Pt core-shell nanorods with an expanded Pt lattice and tunable length. The obtained Pd2Sn@Pt catalysts exhibit superior activity and stability for ethanol electrooxidation compared to Pd2Sn and commercial Pt/C catalysts. By tuning the length of the Pd2Sn@Pt nanorods, remarkable mass activity of up to 4.75 A mgPd+Pt-1 and specific activity of 20.14 mA cm-2 are achieved for the short nanorods owing to their large specific surface area. A hybrid electrolysis system for ethanol oxidation and hydrogen evolution is constructed using Pd2Sn@Pt as the anodic catalyst and Pt mesh as the cathode. The system requires a low cell voltage of 0.59 V for the simultaneous production of acetic acid and hydrogen at a current density of 10 mA cm-2. Density functional theory calculations further reveal that the strained Pt shell reduces energy barriers in the ethanol electrooxidation pathway, facilitating the conversion of ethanol to acetic acid. This work provides valuable guidance for developing highly efficient ethanol electrooxidation catalysts for integrated hydrogen production systems.

Identifying the Role of the Cationic Geometric Configuration in Spinel Catalysts for Polysulfide Conversion in Sodium-Sulfur Batteries

An AB2X4 spinel structure, with tetrahedral A and octahedral B sites, is a paradigmatic class of catalysts with several possible geometric configurations and numerous applications, including polysulfide conversion in metal-sulfur batteries. Nonetheless, the influence of the geometric configuration and composition on the mechanisms of catalysis and the precise manner in which spinel catalysts facilitate the conversion of polysulfides remain unknown. To enable controlled exposure of single active configurations, herein, Cotd2+ and Cooh3+ in Co3O4 catalysts for sodium polysulfide conversion are in large part replaced by Fetd2+ and Feoh3+, respectively, generating FeCo2O4 and CoFe2O4. Through an examination of electrochemical activation energies, the characterization of symmetric cells, and theoretical calculations, we determine that Cooh3+ serves as the active site for the breaking of S-S bonds, while Cotd2+ functions as the active site for the formation of S-Na bonds. The current study underlines the subtle relationship between activity and geometric configurations of spinel catalysts, providing unique insights for the rational development of improved catalysts by optimizing their atomic geometric configuration.

Special NaBH4 hydrolysis achieving multiple-surface-modifications promotes the high-throughput water oxidation of CoN nanowire arrays

Designing an excellent OER catalyst in an alkaline environment is severe yet essential for industrial H₂ application under the electrochemical technique. This study has achieved multiple modifications on CoN nanowires, the classic OER catalyst, via a facile room-temperature NaBH₄ spontaneous hydrolysis. This facile process simultaneously generates oxygen vacancies and robust BN species. It wraps hydrophilic BO_x motifs on the OER response CoN nanowires, producing OER active Co-N-B species, increasing active numbers and guaranteeing structural stability. It suggests that a low NaBH₄ concentration (0.1 mol L^-1) treatment endows CoN_NWAs/CC with excellent OER performance and robust structure, which can drive a current density of 50 mA cm^-2 with only 325 mV overpotentials with more than 24 hours' durability. Even, the catalyst can drive 1000 mA cm^-2 around 480 mV overpotential. This study allows a novel strategy for designing high-performance OER catalysts.

Thermoelectric Performance of Surface-Engineered Cu1.5-xTe-Cu2Se Nanocomposites

Cu_2-xS and Cu_2-xSe have recently been reported as promising thermoelectric (TE) materials for medium-temperature applications. In contrast, Cu_2-xTe, another member of the copper chalcogenide family, typically exhibits low Seebeck coefficients that limit its potential to achieve a superior thermoelectric figure of merit, zT, particularly in the low-temperature range where this material could be effective. To address this, we investigated the TE performance of Cu_1.5-xTe-Cu₂Se nanocomposites by consolidating surface-engineered Cu_1.5Te nanocrystals. This surface engineering strategy allows for precise adjustment of Cu/Te ratios and results in a reversible phase transition at around 600 K in Cu_1.5-xTe-Cu₂Se nanocomposites, as systematically confirmed by in situ high-temperature X-ray diffraction combined with differential scanning calorimetry analysis. The phase transition leads to a conversion from metallic-like to semiconducting-like TE properties. Additionally, a layer of Cu₂Se generated around Cu_1.5-xTe nanoparticles effectively inhibits Cu_1.5-xTe grain growth, minimizing thermal conductivity and decreasing hole concentration. These properties indicate that copper telluride based compounds have a promising thermoelectric potential, translated into a high dimensionless zT of 1.3 at 560 K.

Microwave-Assisted Synthesis of MoS2/BiVO4 Heterojunction for Photocatalytic Degradation of Tetracycline Hydrochloride

Compared with traditional hydrothermal synthesis, microwave-assisted synthesis has the advantages of being faster and more energy efficient. In this work, the MoS₂/BiVO₄ heterojunction photocatalyst was synthesized by the microwave-assisted hydrothermal method within 30 min. The morphology, structure and chemical composition were characterized by X-ray diffraction (XRD), Raman, X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM), and high-resolution transmission electron microscopy (HRTEM). The results of characterizations demonstrated that the synthesized MoS₂/BiVO₄ heterojunction was a spherical structure with dimensions in the nanorange. In addition, the photocatalytic activity of the samples was investigated by degrading tetracycline hydrochloride (TC) under visible light irradiation. Results indicated that the MoS₂/BiVO₄ heterojunction significantly improved the photocatalytic performance compared with BiVO₄ and MoS₂, in which the degradation rate of TC (5 mg L^-1) by compound where the mass ratio of MoS₂/BiVO₄ was 5 wt% (MB5) was 93.7% in 90 min, which was 2.36 times of BiVO₄. The active species capture experiments indicated that •OH, •O₂^- and h⁺ active species play a major role in the degradation of TC. The degradation mechanism and pathway of the photocatalysts were proposed through the analysis of the band structure and element valence state. Therefore, microwave technology provided a quick and efficient way to prepare MoS₂/BiVO₄ heterojunction photocatalytic efficiently.