A Millimeter-Scale Soft Robot for Tissue Biopsy Procedures

The impact of overweight and obesity on health outcomes in the United States from 1990 to 2021

AIM

Elevated body mass index (BMI) presents a significant public health challenge in the United States, contributing to considerable morbidity, mortality and economic burden. This study investigates the health burden of overweight and obesity in the United States from 1990 to 2021, leveraging the Global Burden of Disease data set to analyse trends, disparities and potential determinants of high BMI-related health outcomes.

MATERIALS AND METHODS

Our study focused on the United States, analysing trends in disability-adjusted life years (DALY) and deaths attributable to high BMI, defined as a BMI of 25 kg/m2 or higher for adults. Statistical analyses included estimated annual percentage change (EAPC) in age-standardized DALY rates and age-standardized death rates. Pearson correlation was performed between EAPCs and the socio-demographic index (SDI), with significance set at p < 0.05.

RESULTS

From 1990 to 2021, age-standardized DALY rates attributable to high BMI increased by 24.9%, whereas the age-standardized death rates increased by 5.2%. Age disparities showed DALYs peaking at 60-64 years for males and 65-69 years for females, with deaths peaking at 65-69 years for males and 90-94 years for females. A strong negative correlation was found between the EAPC in age-standardized DALY and death rates and the SDI.

CONCLUSIONS

Overweight and obesity significantly impact public health in the United States, especially among older adults and lower socio-demographic regions. Comprehensive public health strategies integrating behavioural, technological and environmental interventions are crucial. Future research should focus on longitudinal studies, personalized interventions and policy-driven approaches to address the multifaceted influences on high BMI.

A fabrication strategy for millimeter-scale, self-sensing soft-rigid hybrid robots

Soft robots typically involve manual assembly of core hardware components like actuators, sensors, and controllers. This increases fabrication time and reduces consistency, especially in small-scale soft robots. We present a scalable monolithic fabrication method for millimeter-scale soft-rigid hybrid robots, simplifying the integration of core hardware components. Actuation is provided by soft-foldable polytetrafluoroethylene film-based actuators powered by ionic fluid injection. The desired motion is encoded by integrating a mechanical controller, comprised of rigid-flexible materials. The robot's motion can be self-sensed using an ionic resistive sensor by detecting electrical resistance changes across its body. Our approach is demonstrated by fabricating three distinct soft-rigid hybrid robotic modules, each with unique degrees of freedom: translational, bending, and roto-translational motions. These modules connect to form a soft-rigid hybrid continuum robot with real-time shape-sensing capabilities. We showcase the robot's capabilities by performing object pick-and-place, needle steering and tissue puncturing, and optical fiber steering tasks.

Tissue palpation in endoscopy using EIT and soft actuators

The integration of soft robots in medical procedures has significantly improved diagnostic and therapeutic interventions, addressing safety concerns and enhancing surgeon dexterity. In conjunction with artificial intelligence, these soft robots hold the potential to expedite autonomous interventions, such as tissue palpation for cancer detection. While cameras are prevalent in surgical instruments, situations with obscured views necessitate palpation. This proof-of-concept study investigates the effectiveness of using a soft robot integrated with Electrical Impedance Tomography (EIT) capabilities for tissue palpation in simulated in vivo inspection of the large intestine. The approach involves classifying tissue samples of varying thickness into healthy and cancerous tissues using the shape changes induced on a hydraulically-driven soft continuum robot during palpation. Shape changes of the robot are mapped using EIT, providing arrays of impedance measurements. Following the fabrication of an in-plane bending soft manipulator, the preliminary tissue phantom design is detailed. The phantom, representing the descending colon wall, considers induced stiffness by surrounding tissues based on a mass-spring model. The shape changes of the manipulator, resulting from interactions with tissues of different stiffness, are measured, and EIT measurements are fed into a Long Short-Term Memory (LSTM) classifier. Train and test datasets are collected as temporal sequences of data from a single training phantom and two test phantoms, namely, A and B, possessing distinctive thickness patterns. The collected dataset from phantom B, which differs in stiffness distribution, remains unseen to the network, thus posing challenges to the classifier. The classifier and proposed method achieve an accuracy of 93 % and 88.1 % on phantom A and B, respectively. Classification results are presented through confusion matrices and heat maps, visualising the accuracy of the algorithm and corresponding classified tissues.

AI co-pilot bronchoscope robot

The unequal distribution of medical resources and scarcity of experienced practitioners confine access to bronchoscopy primarily to well-equipped hospitals in developed regions, contributing to the unavailability of bronchoscopic services in underdeveloped areas. Here, we present an artificial intelligence (AI) co-pilot bronchoscope robot that empowers novice doctors to conduct lung examinations as safely and adeptly as experienced colleagues. The system features a user-friendly, plug-and-play catheter, devised for robot-assisted steering, facilitating access to bronchi beyond the fifth generation in average adult patients. Drawing upon historical bronchoscopic videos and expert imitation, our AI-human shared control algorithm enables novice doctors to achieve safe steering in the lung, mitigating misoperations. Both in vitro and in vivo results underscore that our system equips novice doctors with the skills to perform lung examinations as expertly as seasoned practitioners. This study offers innovative strategies to address the pressing issue of medical resource disparities through AI assistance.

A 3D-MICROPRINTED COAXIAL NOZZLE FOR FABRICATING LONG, FLEXIBLE MICROFLUIDIC TUBING

A variety of emerging applications, particularly those in medical and soft robotics fields, are predicated on the ability to fabricate long, flexible meso/microfluidic tubing with high customization. To address this need, here we present a hybrid additive manufacturing (or "three-dimensional (3D) printing") strategy that involves three key steps: (i) using the "Vat Photopolymerization (VPP) technique, "Liquid-Crystal Display (LCD)" 3D printing to print a bulk microfluidic device with three inlets and three concentric outlets; (ii) using "Two-Photon Direct Laser Writing (DLW)" to 3D microprint a coaxial nozzle directly atop the concentric outlets of the bulk microdevice, and then (iii) extruding paraffin oil and a liquid-phase photocurable resin through the coaxial nozzle and into a polydimethylsiloxane (PDMS) channel for UV exposure, ultimately producing the desired tubing. In addition to fabricating the resulting tubing-composed of polymerized photomaterial-at arbitrary lengths (e.g., > 10 cm), the distinct input pressures can be adjusted to tune the inner diameter (ID) and outer diameter (OD) of the fabricated tubing. For example, experimental results revealed that increasing the driving pressure of the liquid-phase photomaterial from 50 kPa to 100 kPa led to fluidic tubing with IDs and ODs of 291±99 μm and 546±76 μm up to 741±31 μm and 888±39 μm, respectively. Furthermore, preliminary results for DLW-printing a microfluidic "M" structure directly atop the tubing suggest that the tubing could be used for "ex situ DLW (esDLW)" fabrication, which would further enhance the utility of the tubing.

A multifunctional soft robot for cardiac interventions

In minimally invasive endovascular procedures, surgeons rely on catheters with low dexterity and high aspect ratios to reach an anatomical target. However, the environment inside the beating heart presents a combination of challenges unique to few anatomic locations, making it difficult for interventional tools to maneuver dexterously and apply substantial forces on an intracardiac target. We demonstrate a millimeter-scale soft robotic platform that can deploy and self-stabilize at the entrance to the heart, and guide existing interventional tools toward a target site. In two exemplar intracardiac procedures within the right atrium, the robotic platform provides enough dexterity to reach multiple anatomical targets, enough stability to maintain constant contact on motile targets, and enough mechanical leverage to generate newton-level forces. Because the device addresses ongoing challenges in minimally invasive intracardiac intervention, it may enable the further development of catheter-based interventions.

Personalized magnetic tentacles for targeted photothermal cancer therapy in peripheral lungs

Lung cancer remains one of the most life-threatening diseases and is currently managed through invasive approaches such as surgery, chemo- or radiotherapy. In this work, we introduce a novel method for the targeted delivery of a therapeutic laser for the treatment of tumors in peripheral areas of the lungs. The approach uses a 2.4 mm diameter, ultra-soft, patient-specific magnetic catheter delivered from the end of a standard bronchoscope to reach the periphery of the lungs. Integrated shape sensing facilitates supervised autonomous full-shape control for precise navigation into the sub-segmental bronchi, and an embedded laser fiber allows for treatment via localized energy delivery. We report the complete navigation of eight primary lumina in the bronchi of an anatomically accurate phantom (developed from computed tomography (CT) data) and successful laser delivery for photothermal ablation. We further evaluate the approach in three diverse branches of excised cadaveric lungs, showing a mean improvement in navigation depth of 37% with less tissue displacement when compared to a standard semi-rigid catheter and navigation depth repeatability across all tests of <1 mm.