Complex variation of trabecular bone structure in the proximal humerus and femur of five modern human populations

Trabecular bone volume fraction in Holocene and Late Pleistocene humans

Research suggests that recent modern humans have gracile skeletons in having low trabecular bone volume fraction (BV/TV) and that gracilization of the skeleton occurred in the last 10,000 years. This has been attributed to a reduction in physical activity in the Holocene. However, there has been no thorough sampling of BV/TV in Pleistocene humans due to limited access to high resolution images of fossil specimens. Therefore, our study investigates the gracilization of BV/TV in Late Pleistocene humans and recent (Holocene) modern humans to improve our understanding of the emergence of gracility. We used microcomputed tomography to measure BV/TV in the femora, humeri and metacarpals of a sample of Late Pleistocene humans from Dolní Věstonice (Czech Republic, ∼26 ka, n = 6) and Ohalo II (Israel, ∼19 ka, n = 1), and a sample of recent humans including farming groups (n = 39) and hunter-gatherers (n = 6). We predicted that 1) Late Pleistocene humans would exhibit greater femoral and humeral head BV/TV compared with recent humans and 2) among recent humans, metacarpal head BV/TV would be greater in hunter-gatherers compared with farmers. Late Pleistocene humans had higher BV/TV compared with recent humans in both the femur and humerus, supporting our first prediction, and consistent with previous findings that Late Pleistocene humans are robust as compared to recent humans. However, among recent humans, there was no significant difference in BV/TV in the metacarpals between the two subsistence groups. The results highlight the similarity in BV/TV in the hand of two human groups from different geographic locales and subsistence patterns and raise questions about assumptions of activity levels in archaeological populations and their relationships to trabecular BV/TV.

The deep trabecular structure of first metacarpals in extant hominids

OBJECTIVES

Recent studies have associated subarticular trabecular bone distribution in the extant hominid first metacarpal (Mc1) with observed thumb use, to infer fossil hominin thumb use. Here, we analyze the entire Mc1 to test for interspecific differences in: (1) the absolute volume of trabecular volume fraction, (2) the distribution of the deeper trabecular network, and (3) the distribution of trabeculae in the medullary cavity, especially beneath the Mc1 disto-radial flange.

MATERIALS AND METHODS

Trabecular bone was imaged using micro-computed tomography in a sample of Homo sapiens (n = 11), Pan paniscus (n = 10), Pan troglodytes (n = 11), Gorilla gorilla (n = 10) and Pongo sp., (n = 7). Using Canonical Holistic Morphometric Analysis (cHMA), we tested for interspecific differences in the trabecular bone volume fraction (BV/TV) and its relative distribution (rBV/TV) throughout the Mc1, including within the head, medullary cavity, and base.

RESULTS

P. paniscus had the highest, and H. sapiens the lowest, BV/TV relative to other species. rBV/TV distribution statistically distinguished the radial concentrations and lack of medullary trabecular bone in the H. sapiens Mc1 from all other hominids. H. sapiens and, to a lesser extent, G. gorilla also had a significantly higher trabecular volume beneath the disto-radial flange relative to other hominids.

DISCUSSION

These results are consistent with differences in observed thumb use in these species and may also reflect systemic differences in bone volume fraction. The trabecular bone extension into the medullary cavity and concentrations beneath the disto-radial flange may represent crucial biomechanical signals that will aid in the inference of fossil hominin thumb use.

Variation and covariation of external shape and cross-sectional geometry in the human metacarpus

OBJECTIVES

Analyses of external bone shape using geometric morphometrics (GM) and cross-sectional geometry (CSG) are frequently employed to investigate bone structural variation and reconstruct activity in the past. However, the association between these methods has not been thoroughly investigated. Here, we analyze whole bone shape and CSG variation of metacarpals 1-5 and test covariation between them.

MATERIALS AND METHODS

We analyzed external metacarpal shape using GM and CSG of the diaphysis at three locations in metacarpals 1-5. The study sample includes three modern human groups: crew from the shipwrecked Mary Rose (n = 35 metacarpals), a Pre-industrial group (n = 50), and a Post-industrial group (n = 31). We tested group differences in metacarpal shape and CSG, as well as correlations between these two aspects of metacarpal bone structure.

RESULTS

GM analysis demonstrated metacarpus external shape variation is predominately related to changes in diaphyseal width and articular surface size. Differences in external shape were found between the non-pollical metacarpals of the Mary Rose and Pre-industrial groups and between the third metacarpals of the Pre- and Post-industrial groups. CSG results suggest the Mary Rose and Post-industrial groups have stronger metacarpals than the Pre-industrial group. Correlating CSG and external shape showed significant relationships between increasing external robusticity and biomechanical strength across non-pollical metacarpals (r: 0.815-0.535; p ≤ 0.05).

DISCUSSION

Differences in metacarpal cortical structure and external shape between human groups suggest differences in the type and frequency of manual activities. Combining these results with studies of entheses and kinematics of the hand will improve reconstructions of manual behavior in the past.

A Novel Radiological Classification System of the Proximal Humerus

Different anatomical variants have been reported for the proximal and distal femur. Given this context, the goal of our study was to answer the following question: Can we also identify different anatomical variants of the proximal humerus?Two hundred anteroposterior (AP) radiographs of the proximal humerus with an equal gender distribution and equal laterality per gender were reviewed. The metaphyseal diameter of the proximal humerus at the level of the anatomical neck (X) and the intramedullary diameter at 10 cm from the apex of the greater tuberosity (Y) were measured. A new ratio was established, based on both measurements (Y/X). Radiographs showed different anatomical variants: type A: Y/X < 0.3, type B: Y/X = 0.3-0.4, type C: Y/X > 0.4. Two observers reviewed the AP radiographs independently and blindly in 2 different sessions.Three different anatomical groups (A, B and C) were identified based on the 25th and 75th percentiles. A higher percentage of type C was observed among females and a higher percentage of type A among males. A high inter-observer reliability was noted, with a Cronbach's alpha of 0.97 (ICC 0.96-0.98). The intra-observer reliability for observer 1 had a Cronbach's alpha of 0.98.A novel radiological classification of the proximal humerus has been established based on 3 different anatomical types (A, B and C). Further studies are needed to establish whether the novel classification system can be used as an indicator for aseptic loosening of cemented or cementless total shoulder arthroplasty.

Surgical technique and comparison of autologous cancellous bone grafts from various donor sites in rats

Autologous cancellous bone graft is the gold standard in large bone defect repair. However, studies using autologous bone grafting in rats are rare. To determine the feasibility of autologous cancellous bone graft harvest from different anatomical donor sites (humerus, ilium, femur, tibia, and tail vertebrae) in rats and compare their suitability as donor sites, a total of 13 freshly euthanized rats were used to describe the surgical technique, determine the cancellous bone volume and microstructure, and compare the cancellous bone collected quantitatively and qualitatively. It was feasible to harvest cancellous bone grafts from all five anatomical sites with the humerus and tail being more surgically challenging. The microstructural analysis using micro-computed tomography showed a significantly lower bone volume fraction, bone mineral density, and trabecular thickness of the humerus and iliac crest compared to the femur, tibia, and tail vertebrae. The harvested weight and volume did not differ between the donor sites. All donor sites apart from the femur yielded primary osteogenic cells confirmed by the presence of alkaline phosphatase and Alizarin Red S stain. Bone samples from the iliac crest showed the most consistent outgrowth of osteoprogenitor cells. In conclusion, the tibia and iliac crest may be the most favorable donor sites considering the surgical approach. However, due to the differences in microstructure of the cancellous bone and the consistency of outgrowth of osteoprogenitor cells, the donor sites may have different healing properties, that need further investigation in an in vivo study.

Ontogenetic Patterning of Human Subchondral Bone Microarchitecture in the Proximal Tibia

High-resolution computed tomography images were acquired for 31 proximal human tibiae, age 8 to 37.5 years, from Norris Farms #36 cemetery site (A.D. 1300). Morphometric analysis of subchondral cortical and trabecular bone architecture was performed between and within the tibial condyles. Kruskal−Wallis and Wilcoxon signed-rank tests were used to examine the association between region, age, body mass, and each morphometric parameter. The findings indicate that age-related changes in mechanical loading have varied effects on subchondral bone morphology. With age, trabecular microstructure increased in bone volume fraction (p = 0.033) and degree of anisotropy (p = 0.012), and decreased in connectivity density (p = 0.001). In the subchondral cortical plate, there was an increase in thickness (p < 0.001). When comparing condylar regions, only degree of anisotropy differed (p = 0.004) between the medial and lateral condyles. Trabeculae in the medial condyle were more anisotropic than in the lateral region. This research represents an innovative approach to quantifying both cortical and trabecular subchondral bone microarchitecture in archaeological remains.

Tibial cortical and trabecular variables together can pinpoint the timing of impact loading relative to menarche in premenopausal females

OBJECTIVES

Though relationships between limb bone structure and mechanical loading have provided fantastic opportunities for understanding the lives of prehistoric adults, the lives of children remain poorly understood. Our aim was to determine whether or not adult tibial skeletal variables retain information about childhood/adolescent loading, through assessing relationships between cortical and trabecular bone variables and the timing of impact loading relative to menarche in premenopausal adult females.

METHODS

Peripheral quantitative computed tomography was used to quantify geometric and densitometric variables from the proximal tibial diaphysis (66% location) and distal epiphysis (4% location) among 81 nulliparous young adult female controls and athletes aged 19-33 years grouped according to intensity of impact loading both pre- and post-menarche: (1) Low:Low (Controls); (2) High:Low; (3) High:High; (4) Moderate:Moderate; (5) Low:Moderate. ANCOVA was used to compare properties among the groups adjusted for age, stature, and body mass.

RESULTS

Significant increases in diaphyseal total cross-sectional area and strength-strain index were documented among groups with any pre-menarcheal impact loading relative to groups with none, regardless of post-menarcheal loading history (p < .01). In contrast, significantly elevated distal trabecular volumetric bone mineral density was only documented among groups with recent post-menarcheal loading relative to groups with none, regardless of pre-menarcheal impact loading history (p < .01).

CONCLUSIONS

The consideration of diaphyseal cortical bone geometric and epiphyseal trabecular bone densitometric variables together within the tibia can identify variation in pre-menarcheal and post-menarcheal impact loading histories among premenopausal adult females.

Design procedure for triply periodic minimal surface based biomimetic scaffolds

Cellular additively manufactured metallic structures for load-bearing scaffolds in the context of bone tissue engineering (BTE) have emerged as promising candidates. Due to many advantages in terms of morphology, stiffness, strength and permeability compared to conventional truss structures, lattices based on triply periodic minimal surfaces (TPMS) have recently attracted increasing interest for this purpose. In addition, the finite element method (FEM) has been proven to be suitable for accurately predicting the deformation behavior as well as the mechanical properties of geometric structures after appropriate parameter validation based on experimental data. Numerous publications have examined many individual aspects, but conceptual design procedures that consider at least the essential requirements for cortical and trabecular bone simultaneously are still rare. Therefore, this paper presents a numerical approach to first determine the actual admissible design spaces for a choice of TPMS based lattices with respect to key parameters and then weight them with respect to further benefit parameters. The admissible design spaces are limited by pore size, strut size and volume fraction, and the subsequent weighting is based on Young's modulus, cell size and surface area. Additively manufactured beta-Ti-42Nb with a strain stiffness of 60.5GPa is assumed as material. In total, the procedure considers twelve lattice types, consisting of six different TPMS, each as network solid and as sheet solid. The method is used for concrete prediction of suitable TPMS based lattices for cortical bone and trabecular bone. For cortical bone a lattice based on the Schwarz Primitive sheet solid with 67.572μm pore size, 0.5445 volume fraction and 18.758GPa Young's modulus shows to be the best choice. For trabecular bone a lattice based on the Schoen Gyroid network solid with 401.39μm pore size, 0.3 volume fraction and 4.6835GPa Young's modulus is the identified lattice. Finally, a model for a long bone scaffold is generated from these two lattices using functional grading methods in terms of volume fraction, cell size and TPMS type. In particular, the presented procedure allows an efficient estimation for a likely suitable biometric TPMS-based scaffolds. In addition to medical applications, however, the method can also be transferred to numerous other applications in mechanical, civil and electrical engineering.

What is normal bone health? A bioarchaeological perspective on meaningful measures and interpretations of bone strength, loss, and aging

Bioarchaeological (the study of archeological human remains together with contextual and documentary evidence) offers a unique vantage point to examine variation in skeletal morphology related to influences such as activity, disease, and nutrition. The human skeleton is composed of a dynamic tissue that is forged by biocultural factors over the entire life course, providing a record of individual, and community history. Various aspects of adult bone health, particularly bone maintenance and loss and the associated skeletal disease osteoporosis, have been examined in numerous past populations. The anthropological study of bone loss has traditionally focused on the signature of postmenopausal aging, costs of reproduction, and fragility in females. The a priori expectation of normative sex-related bone loss/fragility in bioanthropological studies illustrates the wider gender-ideological bias that continues in research design and data analysis in the field. Contextualized data on bone maintenance and aging in the archeological record show that patterns of bone loss do not constitute predictable consequences of aging or biological sex. Instead, the critical examination of bioarchaeological data highlights the complex and changing processes that craft the human body over the life course, and calls for us to question the ideal or "normal" range of bone quantity and quality in the human skeleton, and to critically reflect on what measures are actually biologically and/or socially meaningful.

Early ontogeny of humeral trabecular bone in Neandertals and recent modern humans

Trabecular bone ontogeny is well known in modern humans and unknown in Neandertals. Yet the bone developmental pattern is useful for interpreting fossils from evolutionary and functional perspectives. Interestingly, microstructure in early ontogeny is supposedly not influenced by high and specific mechanical loading related to the lifestyle of a human group and consequently does not directly depend on the activities of hunter-gatherers. Here, we specifically explored the early growth trajectories of the trabecular bone structure of the humerus and emphasized in particular how bone fraction (bone volume/total volume [BV/TV]) was built up in Neandertals, given the specific modern human bone loss after birth and the use of BV/TV in functional studies. Six Neandertals and 26 recent modern humans ranging from perinates to adolescents were included in this study. Six trabecular parameters were measured within a cubic region of interest extracted from the proximal metaphysis of the humerus. We found that the microstructural changes in Neandertals during early ontogeny (<1 year) fit with modern human growth trajectories for each parameter. The specific bone loss occurring immediately after birth in modern humans also occurred in Neandertals (but not in chimpanzees). However, the early childhood fossil Ferrassie 6 presented unexpectedly high BV/TV, whereas the high BV/TV in the Crouzade I adolescent was predictable. These results suggest that Neandertals and modern humans shared predetermined early growth trajectories and developmental mechanisms. We assume that the close relationship between skeletal characteristics in early ontogeny and adults in modern humans also existed in Neandertals. However, it was difficult to ensure that the high BV/TV in Neandertal early childhood, represented by only one individual, was at the origin of the high BV/TV observed in adults. Consequently, our study does not challenge the mechanical hypothesis that explains the trabecular gracilization of the humerus during the Holocene.

Trabecular organization of the proximal femur in Paranthropus robustus: Implications for the assessment of its hip joint loading conditions

Reconstruction of the locomotor repertoire of the australopiths (Australopithecus and Paranthropus) has progressively integrated information from the mechanosensitive internal structure of the appendicular skeleton. Recent investigations showed that the arrangement of the trabecular network at the femoral head center is biomechanically compatible with the pattern of cortical bone distribution across the neck, both suggesting a full commitment to bipedalism in australopiths, but associated with a slightly altered gait kinematics compared to Homo involving more lateral deviation of the body center of mass over the stance limb. To provide a global picture in Paranthropus robustus of the trabecular architecture of the proximal femur across the head, neck and greater trochanter compartments, we applied techniques of virtual imaging to the variably preserved Early Pleistocene specimens SK 82, SK 97, SK 3121, SKW 19 and SWT1/LB-2 from the cave site of Swartkrans, South Africa. We also assessed the coherence between the structural signals from the center of the head and those from the trabecular network of the inferolateral portion of the head and the inferior margin of the neck, sampling the so-called vertical bundle, which in humans represents the principal compressive system of the joint. Our analyses show a functionally related trabecular organization in Pa. robustus that closely resembles the extant human condition, but which also includes some specificities in local textural arrangement. The network of the inferolateral portion of the head shows a humanlike degree of anisotropy and a bone volume fraction intermediate between the extant human and the African ape patterns. These results suggest slight differences in gait kinematics between Pa. robustus and extant humans. The neck portion of the vertical bundle revealed a less biomechanically sensitive signal. Future investigations on the australopith hip joint loading environment should more carefully investigate the trabecular structure of the trochanteric region and possible structural covariation between cortical bone distribution across the neck and site-specific trabecular properties of the arcuate bundle.

Selective Voronoi tessellation as a method to design anisotropic and biomimetic implants

The geometry of a metallic scaffold is important for the success of bone implants, where the introduction of porosity can reduce stress shielding effects and allow for bone tissue integration. In this work, porous scaffolds were designed to closely mimic the natural structure of trabecular bone using selective Voronoi tessellation with preferential seeding. A workflow to generate these structures is introduced, where voided regions of seeds in the starting volume create preferential texture during polyhedral expansion, resulting in modified strut orientation in the implant. Anisotropy was digitally characterized by mean-intercept length and star volume distribution measurements to determine similarity to trabecular orientation. This work demonstrates that selective Voronoi tessellation is an effective method to generate biomimetic porous scaffolds with increased anisotropy and tunable strut architecture in three dimensions as a suitable alternative to patient-derived bone geometries.

Combinations of trabecular and cortical bone properties distinguish various loading modalities between athletes and controls

OBJECTIVES

Variation in trabecular and cortical bone properties is often used to infer habitual behavior in the past. However, the structures of both types of bone are rarely considered together and may even contradict each other in functional interpretations. We examine trabecular and cortical bone properties in various athletes and sedentary controls to clarify the associations between combinations of cortical and trabecular bone properties and various loading modalities.

MATERIALS AND METHODS

We compare trabecular and cortical bone properties using peripheral quantitative computed tomography scans of the tibia between groups of 83 male athletes (running, hockey, swimming, cricket) and sedentary controls using Bayesian multilevel models. We quantify midshaft cortical bone rigidity and area (J, CA), midshaft shape index (Imax/Imin), and mean trabecular bone mineral density (BMD) in the distal tibia.

RESULTS

All groups show unique combinations of biomechanical properties. Cortical bone rigidity is high in sports that involve impact loading (cricket, running, hockey) and low in nonimpact loaded swimmers and controls. Runners have more anteroposteriorly elliptical midshafts compared to other groups. Interestingly, all athletes have greater trabecular BMD compared to controls, but do not differ credibly among each other.

DISCUSSION

Results suggest that cortical midshaft hypertrophy is associated with impact loading while trabecular BMD is positively associated with both impact and nonimpact loading. Midshaft shape is associated with directionality of loading. Individuals from the different categories overlap substantially, but group means differ credibly, suggesting that nuanced group-level inferences of habitual behavior are possible when combinations of trabecular and cortical bone are analyzed.

Automated resolution independent method for comparing in vivo and dry trabecular bone

OBJECTIVES

Variation in human trabecular bone morphology can be linked to habitual behavior, but it is difficult to investigate in vivo due to the radiation required at high resolution. Consequently, functional interpretations of trabecular morphology remain inferential. Here we introduce a method to link low- and high-resolution CT data from dry and fresh bone, enabling bone functional adaptation to be studied in vivo and results compared to the fossil and archaeological record.

MATERIALS AND METHODS

We examine 51 human dry bone distal tibiae from Nile Valley and UK and two pig tibiae containing soft tissues. We compare low-resolution peripheral quantitative computed tomography (pQCT) parameters and high-resolution micro CT (μCT) in homologous single slices at 4% bone length and compare results to our novel Bone Ratio Predictor (BRP) method.

RESULTS

Regression slopes between linear attenuation coefficients of low-resolution pQCT images and bone area/total area (BA/TA) of high-resolution μCT scans differ substantially between geographical subsamples, presumably due to diagenesis. BRP accurately predicts BA/TA (R² = .97) and eliminates the geographic clustering. BRP accurately estimates BA/TA in pigs containing soft tissues (R² = 0.98) without requiring knowledge of true density or phantom calibration of the scans.

DISCUSSION

BRP allows automated comparison of image data from different image modalities (pQCT, μCT) using different energy settings, in archeological bone and wet specimens. The method enables low-resolution data generated in vivo to be compared with the fossil and archaeological record. Such experimental approaches would substantially improve behavioral inferences based on trabecular bone microstructure.

Using point clouds to investigate the relationship between trabecular bone phenotype and behavior: An example utilizing the human calcaneus

OBJECTIVES

The objective of this study is to demonstrate a new method for analyzing trabecular bone volume fraction and degree of anisotropy in three dimensions.

METHODS

We use a combination of automatic mesh registration, point-cloud correspondence registration, and P-value corrected univariate statistical tests to compare bone volume fraction and degree of anisotropy on a point by point basis across the entire calcaneus of two human groups with different subsistence strategies.

RESULTS

We found that the patterns of high and low bone volume fraction and degree of anisotropy distribution between the Black Earth (hunter-gatherers) and Norris Farms (mixed-strategy agriculturalists) are very similar, but differ in magnitude. The hunter-gatherers exhibit higher levels of bone volume fraction and less anisotropic trabecular bone organization. Additionally, patterns of bone volume fraction and degree of anisotropy in the calcaneus correspond well with biomechanical expectations of relative forces experienced during walking and running.

CONCLUSIONS

We conclude that comparing site-specific, localized differences in trabecular bone variables such as bone volume fraction and degree of anisotropy in three-dimensions is a powerful analytical tool. This method makes it possible to determine where similarities and differences between groups are located within the whole skeletal element of interest. The visualization of multiple variables also provides a way for researchers to see how the trabecular bone variables interact within the morphology, and allows for a more nuanced understanding of how they relate to one another and the broader mechanical environment.

Baby steps towards linking calcaneal trabecular bone ontogeny and the development of bipedal human gait

Trabecular bone structure in adulthood is a product of a process of modelling during ontogeny and remodelling throughout life. Insight into ontogeny is essential to understand the functional significance of trabecular bone structural variation observed in adults. The complex shape and loading of the human calcaneus provides a natural experiment to test the relationship between trabecular morphology and locomotor development. We investigated the relationship between calcaneal trabecular bone structure and predicted changes in loading related to development of gait and body size in growing children. We sampled three main trabecular regions of the calcanei using micro-computed tomography scans of 35 individuals aged between neonate to adult from the Norris Farms #36 site (1300 AD, USA) and from Cambridge (1200-1500 AD, UK). Trabecular properties were calculated in volumes of interest placed beneath the calcaneocuboid joint, plantar ligaments, and posterior talar facet. At birth, thin trabecular struts are arranged in a dense and relatively isotropic structure. Bone volume fraction strongly decreases in the first year of life, whereas anisotropy and mean trabecular thickness increase. Dorsal compressive trabecular bands appear around the onset of bipedal walking, although plantar tensile bands develop prior to predicted propulsive toe-off. Bone volume fraction and anisotropy increase until the age of 8, when gait has largely matured. Connectivity density gradually reduces, whereas trabeculae gradually thicken from birth until adulthood. This study demonstrates that three different regions of the calcaneus develop into distinct adult morphologies through varying developmental trajectories. These results are similar to previous reports of ontogeny in human long bones and are suggestive of a relationship between the mechanical environment and trabecular bone architecture in the human calcaneus during growth. However, controlled experiments combined with more detailed biomechanical models of gait maturation are necessary to establish skeletal markers linking growth to loading. This has the potential to be a novel source of information for understanding loading levels, activity patterns, and perhaps life history in the fossil record.

Trabecular bone architecture in the stylopod epiphyses of mustelids (Mammalia, Carnivora)

Mustelidae, a carnivoran clade that includes for instance weasels, badgers, otters and martens, has undergone several evolutionary transitions of lifestyle, resulting in specializations for fossorial, natatorial and scansorial locomotion, in addition to more generalized species. The family is therefore regarded as offering an adequate framework for morpho-functional analyses. However, the architecture of the epiphyseal trabecular bone, which is argued to be particularly responsive to the biomechanical environment, has never been studied. Here, we quantify trabecular bone parameters of the proximal and distal epiphyses of the humerus and femur in 29 species of mustelids and assess the differences of these parameters among groups defined a priori based on the aforementioned locomotor types. The parameters are assessed in a phylogenetic framework, taking into account the potential effect on an individual's body mass. The range of variation described by the acquired parameters is relatively restricted when compared to that of other clades. Generalists, however, are featuring a wider range of variation than the other types. While clear discrimination of locomotor types is difficult, some differences were highlighted by our analysis, such as a greater bone fraction associated with the natatorial taxa, which we discuss in a functional context.

Intensive terrestrial or marine locomotor strategies are associated with inter- and intra-limb bone functional adaptation in living female athletes

OBJECTIVES

To systematically characterize intra-limb patterns of skeletal plasticity to loading among living women, in order to better understand regional complexity in structural adaptation within the lower limb and more accurately infer behavior in the past.

MATERIALS AND METHODS

We used peripheral quantitative computed tomography imaging of the femur, tibia, first and second metatarsals to quantify bone morphology among female controls and athletes representative of either terrestrial or marine mobility, grouped by loading category (odd-impact, repetitive low-impact, and high-magnitude). Parameters included midshaft bone density, areas, rigidity, and shape, epiphyseal bone densities and areas. We assessed between-group differences and the influence of training history on significant variation among the loading groups.

RESULTS

Terrestrial mobility strategies were best distinguished by significant midshaft periosteal hypertrophy across the lower limb/foot relative to controls, and by particularly high midshaft femoral and tibial cortical bone areas relative to rowers. Enhanced midshaft bone area was typically paired with decreased bone density among athlete groups. Sport-specific variation in training duration/timing was significantly correlated with multiple midshaft parameters.

DISCUSSION

Results demonstrate characteristic patterns of intra-limb adaptation to terrestrial and marine mobility strategies among active women relative to controls, and highlight components of these patterns that may be shaped in part by differences in loading duration/timing. Additionally, our findings support constraints on skeletal variation in the distal tibia and foot relative to more proximal locations about the knee among living women. For example, metatarsal variation was constrained, but where present reflected sport-specific variation in force distribution in the foot.