Ladungstrennung in angeregten Zuständen entkoppelter Systeme – TICT-Verbindungen und Implikationen für die Entwicklung neuer Laserfarbstoffe sowie für den Primärprozeß von Sehvorgang und Photosynthese

Highly sensitive fluorescence turn-OFF and reversible chemical sensor for Hg2+ ion based on pyrene appended 2-thiohydantoin

A novel fluorometric chemical sensor (PY-2TH) based on 2-thiohydantoin (2TH) in conjugation with pyrene (PY) was designed by facile one-pot Knoevenagel condensation reaction and explored for the sensitive and selective detection of Hg2+ ion in solution and solid state methods. Different analytical techniques like NMR and LC-MS concomitantly confirmed the structure of PY-2TH. Absorption and emission studies demonstrate positive solvatochromic effects indicating intramolecular charge transfer in polar solvents. PY-2TH exhibits unprecedented selectivity for detecting Hg2+ ions in tetrahydrofuran (THF) through turn-OFF fluorescence with 90% decrease in the emission intensity with a limit of detection (LOD) of ∼4.4 ppb. The mechanistic investigation through NMR and optical studies confirm the formation of a 2:1 complex between PY-2TH and Hg2+. Thin films of PY-2TH exhibits the J-aggregate formation in the solid state leading to a shift in the emission towards the near-infrared region. Further, we have demonstrated the applicability of PY-2TH for detection of Hg2+ ions and fluorescence imaging in live Zebrafish larvae and the toxicological effects are explored. Cytotoxic evaluation on Zebrafish larval cells revealed that PY-2TH is found to be non-toxic. Detailed analysis demonstrate the potential of PY-2TH for ultra-sensitive Hg2+ ion detection and removal in aqueous environments, highlighting its applicability for identification of metal contamination in live organisms and environmental toxicity.

One-Step Cascade Synthesis of ortho-bay-Imidazolo-Extended Perylene Biscarboximides (OBISIM) and Their Application as Broad-Spectrum Fluorescent Dyes

A one-step synthesis of perylene dyes with lateral extension by condensed imidazoles in a cascade reaction of sodium amide and benzonitrile is described in which multiple extensions can be controlled by the reaction conditions. The extensions lead to bathochromic shifts in absorption and fluorescence while maintaining high fluorescence quantum yields. The condensed imidazole units cause additional absorption bands in the hypsochromic visible region, resulting in broad-band absorbers. Multiple extensions of the aromatic system enable the NIR spectral approach of the spectra. Energy transfer (fluorescence resonance energy transfer, FRET) of dyads with perylene biscarboximides is very efficient and achieves quantum yields close to unity regardless of the lengths and orientation of the spacer. Applications as broad-band-absorbing fluorescent dyes, such as in solar collectors, are discussed.

Tunable Fluorescence via Self-Assembled Switching of AIE-Active Micelle-like Nanoaggregates

Chemical structures bearing a combination of aggregation-induced emission enhancement (AIEE) and intramolecular charge transfer (ICT) properties attracted the attention of many researchers. Recently, there is an increasing demand to pose tunable AIEE and ICT fluorophores that could present their conformation changes-related emission colors by adjusting the medium polarity. In this study, we designed and synthesized a series of 4-alkoxyphenyl-substituted 1,8-naphthalic anhydride derivatives NAxC using the Suzuki coupling reaction to construct donor-acceptor (D-A)-type fluorophores with alkoxyl substituents of varying carbon chain lengths (x = 1, 2, 4, 6, 12 in NAxC). To explain the observation that molecules with longer carbon chains revealed unusual fluorescence enhancement in water, we study the optical properties and evaluate their locally excited (LE) and ICT states by solvent effects combined with Lippert-Mataga plots. Then, we explored the self-assembly abilities of these molecules in water-organic (W/O) mixed solutions and observed the morphology of its nanostructure using a fluorescence microscope and SEM. The results show that NAxC, x = 4, 6, 12 show different degrees of self-assembly behaviors and corresponding aggregation-induced emission enhancement (AIEE) progresses. At the same time, different nanostructures and corresponding spectral changes can be obtained by adjusting the water ratio in the mixed solution. That is, NAxC compounds present different transitions between LE, ICT and AIEE based on the polarity, water ratio and time changes. We designed NAxC as the structure-activity relationship (SAR) of the surfactant to demonstrate that AIEE comes from the formation of micelle-like nanoaggregates, which causes a restriction of the transfer from the LE state to the ICT state, and micelle formation results in a blue-shift in emission and enhances the intensity in the aggregate state. Among them, NA12C is most likely to form micelles and the most obvious fluorescence enhancement, which will switch over time due to the nano-aggregation transition.

Hindered Tetraphenylethylene Helicates: Chiral Fluorophores with Deep-Blue Emission, Multiple-Color CPL, and Chiral Recognition Ability

New hindered tetraphenylethylene (TPE) helicates with substitution at 2,6-position of phenyl rings were designed and synthesized. Due to the increased hindrance, the TPE helicates emit strong deep-blue to violet fluorescence both in the solid state and in solution, and could be resolved into enantiomers that emit strong and multicolor circularly polarized luminescence (CPL), and exhibit a high enantioselective recognition of chiral tartaric acid and its derivatives. Surprisingly, the derived helicate tetramines possess amino groups with an unpredented planar structure and sp² -hybridized nitrogen, arousing the change between AIE effect and ACQ phenomenon through photoinduced electron transfer (PET). With advantages of short synthetic route, many modification positions, deep-blue to violet emission, wide CPL tuning, and high chiral recognition ability, the hindered TPE helicates show broad prospects as chiral materials.

Of Twists and Curves: Electronics, Photophysics, and Upcoming Applications of Non-Planar Conjugated Organic Molecules

Non-planar conjugated organic molecules (NPCOMs) contain π-conjugation across their length and also exhibit asymmetry in their conformation. In other words, certain molecular fragments in NPCOMs are either twisted or curved out of planarity. This conformational asymmetry in NPCOMs leads to non-uniform charge-distribution across the molecule, with important photophysical and electronic consequences such as altered thermodynamic stability, chemical reactivity, as well as materials properties. Majorly, NPCOMs can be classified as having either Fused or Rotatable architectures. NPCOMs have been the focus of significant scientific attention in the recent past due to their exciting photophysical behavior that includes intramolecular charge-transfer (ICT), thermally activated delayed fluorescence (TADF) and long-lived charge-separated states. In addition, they also have many useful materials characteristics such as biradical character, semi-conductivity, dynamic conformations, and mechanochromism. As a result, rational design of NPCOMs and mapping their structure-property correlations has become imperative. Researchers have executed conformational changes in NPCOMs through a variety of external stimuli such as pH, temperature, anions-cations, solvent, electric potential, and mechanical force in order to tailor their photophysical, optoelectronic and magnetic properties. Converging to these points, this review highlights the lucrative electronic features, photophysical traits and upcoming applications of NPCOMs by a selective survey of the recent scientific literature.

Quantitative Design of Bright Fluorophores and AIEgens by the Accurate Prediction of Twisted Intramolecular Charge Transfer (TICT)

Inhibition of TICT can significantly increase the brightness of fluorescent materials. Accurate prediction of TICT is thus critical for the quantitative design of high-performance fluorophores and AIEgens. TICT of 14 types of popular organic fluorophores were modeled with time-dependent density functional theory (TD-DFT). A reliable and generalizable computational approach for modeling TICT formations was established. To demonstrate the prediction power of our approach, we quantitatively designed a boron dipyrromethene (BODIPY)-based AIEgen which exhibits (almost) barrierless TICT rotations in monomers. Subsequent experiments validated our molecular design and showed that the aggregation of this compound turns on bright emissions with ca. 27-fold fluorescence enhancement, as TICT formation is inhibited in molecular aggregates.

Chlorine (Cl) - Substituted Carbazole Based A-π-D-π-a Push-Pull Chromophores as Aggregation Enhanced Emission (AEE) Active Viscosity Sensors: Synthesis, DFT and NLO Approach

Three new carbazole functionalized A-π-D-π-A extended chromophores 4a, 4b and 4c comprising of different chemical functional groups on C=C bond with the assistance of chlorovinylene group in π-conjugation are synthesized and investigated spectroscopically. We have investigated the effect of different electron acceptors - carboxycyanomethylene, dicyanomethylene and 2-(benzothiazol-2-yl) cyanomethylene, the effect of the insertion of chlorine in π-conjugation on photophysical properties and the effect of double acceptors. The chromophores 4a, 4b and 4c exhibited positive solvatochromism with large Stokes shifts and bright orange to red solid-state fluorescence. Amongst all the three compounds 4c exhibited maximum emission wavelength at 615 nm in DMSO. They presented characteristic twisted intramolecular charge transfer (TICT) emission. Observations exhibited that 4c containing long hexyl group in donor unit and 2-(benzothiazol-2-yl) cyanomethylene as an acceptor group formed an aggregate in the mixture of solvents and exhibited better aggregation enhanced emission (AEE) compared to the other two derivatives. Amongst the three styryls, 4c showed the highest emission intensity 299 a.u. at 90% water:DMF fraction (f_w). Chromophores 4a-4c also exhibited good fluorescence response towards viscosity. Among the three fluorescent molecular rotors (FMR), 4c exhibited excellent viscosity sensitivity with x value = 0.687. The Non-linear (NLO) characters are estimated with the help of solvatochromic and computational methods using the functionals, B3LYP and CAM-B3LYP. The dyes showed large "linear polarizability (α_CT)", "first order hyperpolarizability" (β) and "second order hyperpolarizability" (γ) values which show that synthesized styryls can be used as a "NLO" material. The α_CT, β and γ for 4c are found to be the maximum amongst the all three dyes which can be ascribed to the smaller band gap apparent from experimental as well as DFT method.

Recent Advancements in and the Future of Organic Emitters: TADF- and RTP-Active Multifunctional Organic Materials

Organic emitting compounds that are based on π-conjugated skeletons have emerged as promising next-generation materials for application in optoelectronic devices. In this Minireview, recent advances in the development of organic emitters that irradiate room-temperature phosphorescence and/or thermally activated delayed fluorescence with extraordinary luminescence properties, such as aggregation-induced emission, mechanochromic luminescence, and circularly polarized luminescence, are discussed.

Consideration of Molecular Structure in the Excited State to Design New Luminogens with Aggregation-Induced Emission

Aggregation-induced emission (AIE) is a photoluminescence phenomenon in which an AIE luminogen (AIEgen) exhibits intense emission in the aggregated or solid state but only weak or no emission in the solution state. Understanding the mechanism of AIE requires consideration of excited state molecular geometry (for example, a π twist). This Minireview examines the history of AIEgens with a focus on the representative AIEgen, tetraphenylethylene (TPE). The mechanisms of solution-state quenching are reviewed and the crucial role of excited-state molecular transformations for AIE is discussed. Finally, recent progress in understanding the relationship between excited state molecular transformations and AIE is overviewed for a range of different AIEgens.

Solvent-dependent dual fluorescence of the push-pull system 2-diethylamino-7-nitrofluorene

The solvent-dependent excited state behavior of the molecular push-pull system 2-diethylamino-7-nitrofluorene has been explored using femtosecond transient absorption spectroscopy in combination with density functional theory calculations. Several excited state minima have been identified computationally, all possessing significant intramolecular charge transfer character. The experimentally observed dual fluorescence is suggested to arise from a planar excited state minimum and another minimum reached by twisting of the aryl-nitrogen bond of the amino group. The majority of the excited state population, however, undergo non-radiative transitions and potential excited state deactivation pathways are assessed in the computational investigation. A third excited state conformer, characterized by twisting around the aryl-nitrogen bond of the nitro group, is reasoned to be responsible for the majority of the non-radiative decays and a crossing between the excited state and ground state is localized. Additionally, ultrafast intersystem crossing is observed in the apolar solvent cyclohexane and rationalized to occur via an El-Sayed assisted transition from one of the identified excited state minima. The solvent thus determines more than just the fluorescence lifetime and shapes the potential energy landscape, thereby dictating the available excited state pathways.

Facile Access to Twisted Intramolecular Charge-Transfer Fluorogens Bearing Highly Pretwisted Donor-Acceptor Systems Together with Readily Fine-Tuned Charge-Transfer Characters

Twisted intramolecular charge-transfer (TICT) fluorogens bearing highly pretwisted geometries and readily-fine-tuned charge-transfer characters are quite promising sensor and electroluminescence (EL) materials. In this study, by using 4-aryloxy-1,8-naphthalimide derivatives as the molecular framework, it is demonstrated for the first time that a CO bond could serve as the central bond to construct new TICT D-A systems. Photophysical and quantum chemical studies confirm that rotation around central CO bonds is responsible for the formation of a stable TICT state in these compounds. More importantly, owing to the structural adjustability of the aryl moiety and the strong steric interactions between the naphthalimide and the aryl ring systems, these compounds can display readily-fine-tuned TICT characters, hence exhibiting an adjustable solvent polarity threshold for aggregation-induced emission (AIE) activity, and could be AIE-active even in less-polar toluene and nonpolar cyclohexane. Furthermore, these compounds could possess highly-pretwisted ground-state geometries, hence could show good EL performance. The findings reveal a facile but effective molecular constructive strategy for versatile, high-performance optoelectronic TICT compounds.

Solvatochromic fluorescence properties of phenothiazine-based dyes involving thiazolo[4,5-b]quinoxaline and benzo[e]indole as strong acceptors

The present work describes the photophysical properties of two newly synthesized compounds, namely (E)-10-butyl-3-(2-(thiazolo[4,5-b]quinoxalin-2-yl)vinyl)-10H-phenothiazine (PTQ) and (E)-10-butyl-3-(2-(1,1-dimethyl-1H-benzo[e]indol-2-yl)vinyl)-10H-phenothiazine (PBI). A strong intramolecular charge transfer (ICT) is observed in both dyes as indicated from absorption and emission studies on varying the solvent polarity. This can be concluded from the large Stokes shifts among these dyes as PTQ exhibits large Stokes shift with >270nm and PBI around 200nm. The effect of increasing polarity caused drastic increase in the charge transfer process leading to twisted intramolecular charge transfer (TICT) process in both the dyes PTQ and PBI. Time-resolved emission studies and non-radiative decay rate constant indicates that the excited states of both dyes behave differently with respect to solvent polarity. The non-radiative decay constant increases dramatically with the solvent polarity specifying change of ICT emissive states in non-polar solvent while TICT emitting states in highly polar solvent. On the other hand, PBI follows a general trend initially exhibiting higher non-radiative decay constant in non-polar solvent like cyclohexane, lowest in moderate polarity owing to the ICT emissive state but with increase in the polarity, the non-radiative decay constant again increases indicating TICT states.

Design Principles for SuCESsFul Biosensors: Specific Fluorophore/Analyte Binding and Minimization of Fluorophore/Scaffold Interactions

Quantifying protein location and concentration is critical for understanding function in situ. Scaffold conjugated to environment-sensitive fluorophore (SuCESsFul) biosensors, in which a reporting fluorophore is conjugated to a binding scaffold, can, in principle, detect analytes of interest with high temporal and spatial resolution. However, their adoption has been limited due to the extensive empirical screening required for their development. We sought to establish design principles for this class of biosensor by characterizing over 400 biosensors based on various protein analytes, binding proteins, and fluorophores. We found that the brightest readouts are attained when a specific binding pocket for the fluorophore is present on the analyte. Also, interaction of the fluorophore with the binding protein it is conjugated to can raise background fluorescence, considerably limiting sensor dynamic range. Exploiting these two concepts, we designed biosensors that attain a 100-fold increase in fluorescence upon binding to analyte, an order of magnitude improvement over the previously best-reported SuCESsFul biosensor. These design principles should facilitate the development of improved SuCESsFul biosensors.

Synthesis and Evaluation of 1,8-Disubstituted-Cyclam/Naphthalimide Conjugates as Probes for Metal Ions

Fluorescent molecular probes for metal ions have a raft of potential applications in chemistry and biomedicine. We report the synthesis and photophysical characterisation of 1,8‐disubstituted‐cyclam/naphthalimide conjugates and their zinc complexes. An efficient synthesis of 1,8‐bis‐(2‐azidoethyl)cyclam has been developed and used to prepare 1,8‐disubstituted triazolyl‐cyclam systems, in which the pendant group is connected to triazole C4. UV/Vis and fluorescence emission spectra, zinc binding experiments, fluorescence quantum yield and lifetime measurements and pH titrations of the resultant bis‐naphthalimide ligand elucidate a complex pattern of photophysical behaviour. Important differences arise from the inclusion of two fluorophores in the one probe and from the variation of triazole substitution pattern (dye at C4 vs. N1). Introducing a second fluorophore greatly extends fluorescence lifetimes, whereas the altered substitution pattern at the cyclam amines exerts a major influence on fluorescence output and metal binding. Crystal structures of two key zinc complexes evidence variations in triazole coordination that mirror the solution‐phase behaviour of these systems.

Photoinduced Charge-Transfer State of 4-Carbazolyl-3-(trifluoromethyl)benzoic Acid: Photophysical Property and Application to Reduction of Carbon-Halogen Bonds as a Sensitizer

The photoinduced persistent intramolecular charge-transfer state of 4-carbazolyl-3-(trifluoromethyl)benzoic acid was confirmed. It showed a higher catalytic activity in terms of yield and selectivity in the photochemical reduction of alkyl halides compared to the parent carbazole. Even unactivated primary alkyl bromides could be reduced by this photocatalyst. The high catalytic activity is rationalized by considering the slower backward single-electron transfer owing to the spatial separation of the donor and acceptor subunits.

X-ray structures of precursors of styrylpyridine-derivatives used to obtain 4-((E)-2-(pyridin-2-yl)vinyl)benzamido-TEMPO: synthesis and characterization

The synthesis and characterization of the precursor isomers trans-4-(2-(pyridin-2-yl)vinylbenzaldehyde (I), trans-4-(2-(pyridin-4-yl)vinylbenzaldehyde (II), trans-4-(2-(pyridin-2-yl)vinylbenzoic acid (III) and (E)-4-(2-(pydridin-4-yl)vinylbenzoic acid (IV) are reported. These compounds were prepared in order to obtain trans-4-((E)-2-(pyridin-2-yl)vinyl)benzamide-TEMPO (V). Compounds I and II were obtained by using a Knoevenagel reaction in the absence of a condensing agent and solvent. Oxidation of the aldehyde group using the Jones reagent afforded the corresponding acid forms III and IV. A condensation reaction with 4-amino-TEMPO using oxalyl chloride/DMF/CH2Cl2 provided the 4-((E)-2-(pyridin-2-yl)vinyl)benzamide-TEMPO. Single crystals of compounds I, II and III were obtained and characterized by X-ray diffraction. Compound I belongs to space group P2(1)/c, a = 12.6674(19) Å, b = 7.2173(11) Å, c = 11.5877(14) Å, b = 97.203(13)° and the asymmetric unit was Z = 4, whereas compound II was in the space group P2(1), with a = 3.85728(9) Å, b = 10.62375(19) Å, c = 12.8625(2) Å, b = 91.722 (2)° and the asymmetric unit was Z = 2. Compound III crystallized as single colorless needle crystals, belonging to the monoclinic system with space group P2(1), with Z = 2, with a = 3.89359(7) Å, b = 17.7014(3) Å, c = 8.04530(12) Å, b = 94.4030 (16)°. All compounds were completely characterized by IR, (1)H-NMR, EI-MS and UV-Vis.

Extensive reduction in back electron transfer in twisted intramolecular charge-transfer (TICT) coumarin-dye-sensitized TiO(2) nanoparticles/film: a femtosecond transient absorption study

We report the synthesis, characterization, and optical and electrochemical properties of two structurally similar coumarin dyes (C1 and C2). These dyes have been deployed as sensitizers in TiO2 nanoparticles and thin films, and the effect of molecular structure on interfacial electron-transfer dynamics has been studied. Steady-state optical absorption, emission, and time-resolved emission studies on both C1 and C2, varying the polarity of the solvent and the solution pH, suggest that both photoexcited dyes exist in a locally excited (LE) state in solvents of low polarity. In highly polar solvents, however, C1 exists in an intramolecular charge-transfer (ICT) state, whereas C2 exists in both ICT and twisted intramolecular charge-transfer (TICT) states, their populations depending on the degree of polarity of the solvent and the pH of the solution. We have employed femtosecond transient absorption spectroscopy to monitor the charge-transfer dynamics in C1- and C2-sensitized TiO2 nanoparticles and thin films. Electron injection has been confirmed by direct detection of electrons in the conduction band of TiO2 nanoparticles and of radical cations of the dyes in the visible and near-IR regions of the transient absorption spectra. Electron injection in both the C1/TiO2 and C2/TiO2 systems has been found to be pulse-width limited (<100 fs); however, back-electron-transfer (BET) dynamics has been found to be slower in the C2/TiO2 system than in the C1/TiO2 system. The involvement of TICT states in C2 is solely responsible for the higher electron injection yield as well as the slower BET process compared to those in the C1/TiO2 system. Further pH-dependent experiments on C1- and C2-sensitized TiO2 thin films have corroborated the participation of the TICT state in the slower BET process in the C2/TiO2 system.