Electrosynthesis of Unusual Nonfcc Palladium Hydride Nanoparticles

Intercalation of hydrogen into the palladium atomic layers during the growth of Pd nanoparticles can lead to the synthesis of unique palladium hydride phases. Here, we discover an unusual nonfcc palladium hydride nanoparticle, a structure that is not face-centered cubic (fcc), formed through coreduction of water molecules and Pd ions in solution. Crystal structure determination based on atomic electron tomography points to potential triclinic unit cells, indicating the presence of more than one nonfcc phase, with some of those being a stack of loosened and distorted close-packed layer of atoms. The probability of finding the nonfcc phase in single-crystalline particles varies depending on the number and distribution of contact area with other particles. Roughly half of the isolated and one side-coalesced single-crystal particles exhibit a nonfcc structure, while fcc dominates multiple side-coalesced single crystals as well as polycrystal particles. These observations suggest a coalescence-induced phase transition from a nonfcc to a stable fcc structure, due to the metastable nature of the nonfcc phases. While hydrogen is proven to be a key component for the synthesis of the nonfcc structure, there was limited formation of the unusual phase in a H2 gas bubbling system. Thus, electrochemical pathways can be promising for the in situ creation and study of unique metastable nanomaterials.

Origin of Solvent Dependency of the Potential of Zero Charge

Fundamental properties of the Au(111)-KPF6 interface, particularly the potential of zero charge (PZC), exhibit pronounced variations among solvents, yet the origin remains largely elusive. In this study, we aim to link the solvent dependency to the microscopic phenomenon of electron spillover occurring at the metal-solution interface in heterogeneous dielectric media. Addressing the challenge of describing the solvent-modulated electron spillover under constant potential conditions, we adopt a semiclassical functional approach and parametrize it with first-principles calculations and experimental data. We unveil that the key variable governing this phenomenon is the local permittivity within the region approximately 2.5 Å above the metal edge. A higher local permittivity facilitates the electron spillover that tends to increase the PZC on the one hand and enhances the screening of the electronic charge that tends to decrease the PZC on the other. These dual effect lead to a nonmonotonic relationship between the PZC and the local permittivity. Moreover, our findings reveal that the electron spillover induces a capacitance peak at electrode potentials that are more negative than the PZC in concentrated solutions. This observation contrasts classical models predicting the peak to occur precisely at the PZC. To elucidate the contribution of electron spillover to the total capacitance, we decompose the total capacitance into a quantum capacitance of the metal Cq, a classical capacitance of electrolyte solution Cc, and a capacitance Cqc accounting for electron-ion correlations. Our calculations reveal that Cqc is negative due to the promoted electron spillover at more negative potentials. Our work not only reveals the importance of local permittivity in tuning the electron spillover but also presents a viable theoretical approach to study solvent effects on electrochemical interfaces under operating conditions.

Electric Double Layer Effects in Electrocatalysis: Insights from Ab Initio Simulation and Hierarchical Continuum Modeling

Structures of the electric double layer (EDL) at electrocatalytic interfaces, which are modulated by the material properties, the electrolyte characteristics (e.g., the pH, the types and concentrations of ions), and the electrode potential, play crucial roles in the reaction kinetics. Understanding the EDL effects in electrocatalysis has attracted substantial research interest in recent years. However, the intrinsic relationships between the specific EDL structures and electrocatalytic kinetics remain poorly understood, especially on the atomic scale. In this Perspective, we briefly review the recent advances in deciphering the EDL effects mainly in hydrogen and oxygen electrocatalysis through a multiscale approach, spanning from the atomistic scale simulated by ab initio methods to the macroscale by a hierarchical approach. We highlight the importance of resolving the local reaction environment, especially the local hydrogen bond network, in understanding EDL effects. Finally, some of the remaining challenges are outlined, and an outlook for future developments in these exciting frontiers is provided.

Proposal of spin crossover as a reversible switch of catalytic activity for the oxygen evolution reaction in two dimensional metal-organic frameworks

The development of oxygen evolution reaction (OER) catalysts with high activity and controllability is crucial for clean energy conversion and storage but remains a challenge. Here, based on first-principles calculations, we propose to utilize spin crossover (SCO) in two-dimensional (2D) metal-organic frameworks (MOFs) to achieve reversible control of OER catalytic activity. The theoretical design of a 2D square lattice MOF with Co as nodes and tetrakis-substituted cyanimino squaric acid (TCSA) as ligands, which transforms between the high spin (HS) and the low spin (LS) state by applying an external strain (∼2%), confirms our proposal. In particular, the HS-LS spin state transition of Co(TCSA) considerably regulates the adsorption strength of the key intermediate HO* in the OER process, resulting in a significant reduction of the overpotential from 0.62 V in the HS state to 0.32 V in the LS state, thus realizing a reversible switch for the activity of the OER. Moreover, the high activity of the LS state is confirmed by microkinetic and constant potential method simulations.

Comprehensive H2 O Molecules Regulation via Deep Eutectic Solvents for Ultra-Stable Zinc Metal Anode

The corrosion, parasitic reactions, and aggravated dendrite growth severely restrict development of aqueous Zn metal batteries. Here, we report a novel strategy to break the hydrogen bond network between water molecules and construct the Zn(TFSI)₂ -sulfolane-H₂ O deep eutectic solvents. This strategy cuts off the transfer of protons/hydroxides and inhibits the activity of H₂ O, as reflected in a much lower freezing point (<-80 °C), a significantly larger electrochemical stable window (>3 V), and suppressed evaporative water from electrolytes. Stable Zn plating/stripping for over 9600 h was obtained. Based on experimental characterizations and theoretical simulations, it has been proved that sulfolane can effectively regulate solvation shell and simultaneously build the multifunctional Zn-electrolyte interface. Moreover, the multi-layer homemade modular cell and 1.32 Ah pouch cell further confirm its prospect for practical application.

Influence of Van der Waals Interactions on the Solvation Energies of Adsorbates at Pt-Based Electrocatalysts

Solvation can significantly modify the adsorption energy of species at surfaces, thereby influencing the performance of electrocatalysts and liquid‐phase catalysts. Thus, it is important to understand adsorbate solvation at the nanoscale. Here we evaluate the effect of van der Waals (vdW) interactions described by different approaches on the solvation energy of *OH adsorbed on near‐surface alloys (NSAs) of Pt. Our results show that the studied functionals can be divided into two groups, each with rather similar average *OH solvation energies: (1) PBE and PW91; and (2) vdW functionals, RPBE, PBE‐D3 and RPBE‐D3. On average, *OH solvation energies are less negative by ∼0.14 eV in group (2) compared to (1), and the values for a given alloy can be extrapolated from one functional to another within the same group. Depending on the desired level of accuracy, these concrete observations and our tabulated values can be used to rapidly incorporate solvation into models for electrocatalysis and liquid‐phase catalysis.

Recent Advancements Towards Closing the Gap between Electrocatalysis and Battery Science Communities: The Computational Lithium Electrode and Activity-Stability Volcano Plots

Despite of the fact that the underlying processes are of electrochemical nature, electrocatalysis and battery research are commonly perceived as two disjointed research fields. Herein, recent advancements towards closing this apparent community gap by discussing the concepts of the constrained ab initio thermodynamics approach and the volcano relationship, which were originally introduced for studying heterogeneously catalyzed reactions by first-principles methods at the beginning of the 21st century, are summarized. The translation of the computational hydrogen electrode (CHE) approach or activity-based volcano plots to a computational lithium electrode (CLiE) or activity-stability volcano plots, respectively, for the investigation of electrode surfaces in batteries may refine theoretical modeling with the aim that enhancements of the underlying concepts are transferred between the research communities. The presented strategy of developing novel approaches by interdisciplinary research activities may trigger further progress of improved theoretical concepts in the near future.

Modeling and Simulations in Photoelectrochemical Water Oxidation: From Single Level to Multiscale Modeling

This review summarizes recent developments, challenges, and strategies in the field of modeling and simulations of photoelectrochemical (PEC) water oxidation. We focus on water splitting by metal-oxide semiconductors and discuss topics such as theoretical calculations of light absorption, band gap/band edge, charge transport, and electrochemical reactions at the electrode-electrolyte interface. In particular, we review the mechanisms of the oxygen evolution reaction, strategies to lower overpotential, and computational methods applied to PEC systems with particular focus on multiscale modeling. The current challenges in modeling PEC interfaces and their processes are summarized. At the end, we propose a new multiscale modeling approach to simulate the PEC interface under conditions most similar to those of experiments. This approach will contribute to identifying the limitations at PEC interfaces. Its generic nature allows its application to a number of electrochemical systems.

Water at Interfaces

The interfaces of neat water and aqueous solutions play a prominent role in many technological processes and in the environment. Examples of aqueous interfaces are ultrathin water films that cover most hydrophilic surfaces under ambient relative humidities, the liquid/solid interface which drives many electrochemical reactions, and the liquid/vapor interface, which governs the uptake and release of trace gases by the oceans and cloud droplets. In this article we review some of the recent experimental and theoretical advances in our knowledge of the properties of aqueous interfaces and discuss open questions and gaps in our understanding.