Aus der Sicht des Synthetikers: Palladiumkomplexe N-heterocyclischer Carbene als Katalysatoren für Kreuzkupplungen

The Mizoroki-Heck reaction between in situ generated alkenes and aryl halides: cross-coupling route to substituted olefins

This review covers palladium-catalyzed typical Mizoroki-Heck cross-coupling reactions of aryl halides with in situ generated alkenes, by following a typical Heck coupling mechanism to form substituted olefins unlike direct cross-coupling of alkenes with aryl halides in Heck olefination. These reactions solve the issue of alkenes undergoing polymerization at high temperatures and increase reaction efficiency by reducing the reaction time and purification steps.

BIAN-NHC Ligands in Transition-Metal-Catalysis: A Perfect Union of Sterically Encumbered, Electronically Tunable N-Heterocyclic Carbenes?

The discovery of NHCs (NHC = N-heterocyclic carbenes) as ancillary ligands in transition-metal-catalysis ranks as one of the most important developments in synthesis and catalysis. It is now well-recognized that the strong σ-donating properties of NHCs along with the ease of scaffold modification and a steric shielding of the N-wingtip substituents around the metal center enable dramatic improvements in catalytic processes, including the discovery of reactions that are not possible using other ancillary ligands. In this context, although the classical NHCs based on imidazolylidene and imidazolinylidene ring systems are now well-established, recently tremendous progress has been made in the development and catalytic applications of BIAN-NHC (BIAN = bis(imino)acenaphthene) class of ligands. The enhanced reactivity of BIAN-NHCs is a direct result of the combination of electronic and steric properties that collectively allow for a major expansion of the scope of catalytic processes that can be accomplished using NHCs. BIAN-NHC ligands take advantage of (1) the stronger σ-donation, (2) lower lying LUMO orbitals, (3) the presence of an extended π-system, (4) the rigid backbone that pushes the N-wingtip substituents closer to the metal center by buttressing effect, thus resulting in a significantly improved control of the catalytic center and enhanced air-stability of BIAN-NHC-metal complexes at low oxidation state. Acenaphthoquinone as a precursor enables facile scaffold modification, including for the first time the high yielding synthesis of unsymmetrical NHCs with unique catalytic properties. Overall, this results in a highly attractive, easily accessible class of ligands that bring major advances and emerge as a leading practical alternative to classical NHCs in various aspects of catalysis, cross-coupling and C-H activation endeavors.

Mechanistic Study of Pd/NHC-Catalyzed Sonogashira Reaction: Discovery of NHC-Ethynyl Coupling Process

The product of a revealed transformation-NHC-ethynyl coupling-was observed as a catalyst transformation pathway in the Sonogashira cross-coupling, catalyzed by Pd/NHC complexes. The 2-ethynylated azolium salt was isolated in individual form and fully characterized, including X-ray analysis. A number of possible intermediates of this transformation with common formulae (NHC)_n Pd(C₂ Ph) (n=1,2) were observed and subjected to collision-induced dissociation (CID) and infrared multiphoton dissociation (IRMPD) experiments to elucidate their structure. Measured bond dissociation energies (BDEs) and IRMPD spectra were in an excellent agreement with quantum calculations for coupling product π-complexes with Pd⁰ . Molecular dynamics simulations confirmed the observed multiple CID fragmentation pathways. An unconventional methodology to study catalyst evolution suggests the reported transformation to be considered in the development of new catalytic systems for alkyne functionalization reactions.

Oxidative Addition of Water, Alcohols, and Amines in Palladium Catalysis

The homolytic cleavage of O-H and N-H or weak C-H bonds is a key elementary step in redox catalysis, but is thought to be unfeasible for palladium. In stark contrast, reported here is the room temperature and reversible oxidative addition of water, isopropanol, hexafluoroisopropanol, phenol, and aniline to a palladium(0) complex with a cyclic (alkyl)(amino)carbene (CAAC) and a labile pyridino ligand, as is also the case in popular N-heterocyclic carbene (NHC) palladium(II) precatalysts. The oxidative addition of protic solvents or adventitious water switches the chemoselectivity in catalysis with alkynes through activation of the terminal C-H bond. Most salient, the homolytic activation of alcohols and amines allows atom-efficient, additive-free cross-coupling and transfer hydrogenation under mild reaction conditions with usually unreactive, yet desirable reagents, including esters and bis(pinacolato)diboron.

Second Comes First: Switching Elementary Steps in Palladium-Catalyzed Cross-Coupling Reactions

The electron-poor palladium(0) complex L3 Pd (L=tris[3,5-bis(trifluoromethyl)phenyl]phosphine) reacts with Grignard reagents RMgX and organolithium compounds RLi via transmetalation to furnish the anionic organopalladates [L2 PdR]- , as shown by negative-ion mode electrospray-ionization mass spectrometry. These palladates undergo oxidative additions of organyl halides R'X (or related SN 2-type reactions) followed by further transmetalation. Gas-phase fragmentation of the resulting heteroleptic palladate(II) complexes results in the reductive elimination of the cross-coupling products RR'. This reaction sequence corresponds to a catalytic cycle, in which the order of the elementary steps of transmetalation and oxidative addition is switched relative to that of palladium-catalyzed cross-coupling reactions proceeding via neutral intermediates. An attractive feature of the palladate-based catalytic system is its ability to mediate challenging alkyl-alkyl coupling reactions. However, the poor stability of the phosphine ligand L against decomposition reactions has so far prevented its successful use in practical applications.

Designing Homogeneous Copper-Free Sonogashira Reaction through a Prism of Pd-Pd Transmetalation

Simultaneous introduction of two different palladium (pre)catalysts, one tuned to promote oxidative addition to (hetero)aryl bromide and another to activate terminal alkyne substrate, leads to productive Pd–Pd transmetalation, subsequent reductive elimination, and formation of disubstituted alkyne. This conceptually novel rational design of copper-free Sonogashira reaction enabled facile identification of the reaction conditions, suitable for the synthesis of alkyl, aryl, and heteroaryl substituted alkynes at room temperature with as low as 0.125 mol % total Pd loading.

Dialkylterphenyl Phosphine-Based Palladium Precatalysts for Efficient Aryl Amination of N-Nucleophiles

A series of 2-aminobiphenyl palladacycles supported by dialkylterphenyl phosphines, PR₂ Ar' (R=Me, Et, iPr, Cyp (cyclopentyl), Ar'=Ar^Dipp2 , Ar^Xyl2f , Dipp (2,6-C6H3-(2,6-C6H3-(CHMe2)2)2), Xyl=xylyl) have been prepared and structurally characterized. Neutral palladacycles were obtained with less bulky terphenyl phosphines (i.e., Me and Et substituents) whereas the largest phosphines provided cationic palladacycles in which the phosphines adopted a bidentate hemilabile k¹ -P,η¹ -C_arene coordination mode. The influence of the ligand structure on the catalytic performance of these Pd precatalysts was evaluated in aryl amination reactions. Cationic complexes bearing the phosphines PiPr₂ Ar^Xyl2 and PCyp₂ Ar^Xyl2 were the most active of the series. These precatalysts have demonstrated a high versatility and efficiency in the coupling of a variety of nitrogen nucleophiles, including secondary amines, alkyl amines, anilines, and indoles, with electronically deactivated and ortho-substituted aryl chlorides at low catalyst loadings (0.25-0.75 mol % Pd) and without excess ligand.

The Buchwald-Hartwig Amination After 25 Years

The Pd-catalyzed coupling of aryl (pseudo)halides and amines is one of the most powerful approaches for the formation of C(sp² )-N bonds. The pioneering reports from Migita and subsequently Buchwald and Hartwig on the coupling of aminostannanes and aryl bromides rapidly evolved into general and practical tin-free protocols with broad substrate scope, which led to the establishment of what is now known as the Buchwald-Hartwig amination. This Minireview summarizes the evolution of this cross-coupling reaction over the course of the past 25 years and illustrates some of the most recent applications of this well-established methodology.

A Highly Active Ylide-Functionalized Phosphine for Palladium-Catalyzed Aminations of Aryl Chlorides

Ylide-functionalized phosphine ligands (YPhos) were rationally designed to fit the requirements of Buchwald-Hartwig aminations at room temperature. This ligand class combines a strong electron-donating ability comparable to NHC ligands with high steric demand similar to biaryl phosphines. The active Pd species are stabilized by agostic C-H⋅⋅⋅Pd rather than by Pd-arene interactions. The practical advantage of YPhos ligands arises from their easy and scalable synthesis from widely available, inexpensive starting materials. Benchmark studies showed that YPhos-Pd complexes are superior to the best-known phosphine ligands in room-temperature aminations of aryl chlorides. The utility of the catalysts was demonstrated by the synthesis of various arylamines in high yields within short reaction times.

Mechanochemical Activation of Zinc and Application to Negishi Cross-Coupling

A form independent activation of zinc, concomitant generation of organozinc species and engagement in a Negishi cross-coupling reaction via mechanochemical methods is reported. The reported method exhibits a broad substrate scope for both C(sp3 )-C(sp2 ) and C(sp2 )-C(sp2 ) couplings and is tolerant to many important functional groups. The method may offer broad reaching opportunities for the in situ generation organometallic compounds from base metals and their concomitant engagement in synthetic reactions via mechanochemical methods.

Formation and Properties of Poly(Ionic Liquid)-Carbene Nanogels Containing Individually Stabilized Silver Species

Imidazolium-based ionic liquids have the ability to undergo a variety of chemical reactions through an N-heterocyclic carbene (NHC) intermediate, which has expanded the chemical toolbox for new applications. Despite their uses and exploration, the carbene-forming properties and applications of their polymeric congeners, poly(ionic liquid)s (PILs), is still underdeveloped. Herein, we explore the NHC-forming properties of a theophylline-derived PIL for nanogel synthesis. Using silver oxide as both the carbene-forming reagent and cross-linker, nanogels containing individually stabilized ions can be created with different sizes and morphology, including large "galaxy-like" superstructures. Using high-resolution TEM techniques, we directly observed the sub-nanometer structure of these constructs. These features combined exemplify the unique chemistry of poly-NHCs for single-metal-ion-stabilization nanogel design.