Recent Asymmetric Phase-Transfer Catalysis with Chiral Binaphthyl-Modified and Related Phase-Transfer Catalysts over the Last 10 Years

In this personal account, we describe our recent advances in the three types of phase-transfer catalysis for various transformations including asymmetric induction: Firstly, asymmetric phase-transfer catalysis with Maruoka-type C₂ -symmetric chiral biaryl-modified tetraalkylammonium salts and phosphonium salts; Secondly, asymmetric phase-transfer catalysis under base-free and neutral conditions; Thirdly, hydrogen-bonding catalysis using tetraalkylammonium and trialkylsulfonium salts. These three different strategies are illustrated by using various phase-transfer catalyzed transformations.

Ion Pair Catalyst - Pentanidinium

In this account, we further describe our already developed N-sp² hybrid guanidinium as an efficient phase-transfer catalyst and ion pair catalysis based on N-sp² hybrid pentanidinium and its application in some new reactions. The sp³ hybrid quaternary ammonium salt has a tetrahedral structure, which means that three sides of it can be effectively steric, allowing the remaining side to be close to the substrate. However, the sp² hybrid ammonium salt allows the substrate to form ion pairs from both directions respectively, so it is a greater challenge to control the stereoselectivity of the reaction. Van der Waals forces, such as hydrogen bonds and π - π ${\pi -\pi }$ interactions, have been used to make electrophiles approach from a certain direction, leading to a higher enantioselectivity. Based on the above idea, we designed an N-sp² hybrid phase-transfer catalyst, pentanidinium. Pentanidinium has five conjugated nitrogen atoms, one of which has a formal positive charge, which is necessary for it to become an ion pair catalyst. We have confirmed that pentanidinium can catalyze α-hydroxylation of 3-substituted-2-oxindoles, Michael addition of 3-alkyloxindoles with vinyl sulfone, and alkylation reactions of sulfenate anions and dihydrocoumarins, desymmetrization of pro-chiral sulfinate to afford enantioenriched sulfinate esters. Pentanidinium with side chain structure changes can also be catalyzed efficiently with enantioconvergent halogenophilic nucleophilic substitution, including azidation and thioesterification. In the reaction catalyzed by pentanidinium, it always attracts us with the advantages of low catalytic load and good enantioselectivity.

Asymmetric Organocatalysis Under Mechanochemical Conditions

Asymmetric organocatalysis is a robust methodology providing access to numerous valuable compounds while having green chemistry principles in mind. The realization of organocatalytic transformation under solvent-free mechanochemical conditions brings additional benefits in terms of yields, selectivities, and, last but not least overall improved sustainability. This overview describes developments in the use of mechanochemistry as a vehicle for asymmetric organocatalytic transformations. The material is organized according to main catalytic activation modes, starting with covalent activation and proceeding to non-covalent activation modes. The advantages of mechanochemical organocatalytic reactions are particularly highlighted, but in some cases also, limitations are mentioned. Possibilities for target compound synthesis are also discussed.

Stereodivergent Construction of Csp3 -Csp3 Bonds Bearing Vicinal Stereocenters by Synergistic Palladium and Phase-Transfer Catalysis

Synergistic catalysis has emerged as one of the most powerful tools for stereodivergent formation of Csp³ -Csp³ bonds bearing vicinal stereocenters. Despite the many successes that have been achieved in this field, stereodivergent Csp³ -Csp³ coupling reactions involving stabilized nucleophiles remain challenging because of the competing single-catalysis pathway. Herein, we report a synergistic palladium/phase-transfer catalyst system that enables diastereodivergent Csp³ -Csp³ coupling reactions of 1,3-dienes with stabilized nucleophile oxindoles. Both the syn and anti coupling products, bearing quaternary and tertiary vicinal stereocenters, could be selectively produced in good yields with high enantio- and diastereoselectivities. Non-covalent activation of the stabilized nucleophile via chiral ion pair in a biphasic system is a crucial success factor in achieving diastereodivergence.

(Thio)urea containing chiral ammonium salt catalysts

(Thio)-urea-containing bifunctional quaternary ammonium salts emerged as powerful non-covalently interacting organocatalysts over the course of the last decade. The most commonly employed catalysts in this field are either based on Cinchona alkaloids, α-amino acids, or trans-cyclohexane-1,2-diamine. Our group has been heavily engaged in the design and use of such catalysts, i. e. trans-cyclohexane-1,2-diamine-based ones for around 10 years now, and it is therefore the intention of this short personal account to provide an overview of the, at least in our opinion, most significant and pioneering achievements in this field by looking on catalyst design and asymmetric method development, with a special focus on our own contributions.

Enantioselective Synthesis of Acyclic Orthogonally Functionalized Compounds Bearing a Quaternary Stereocenter Using Chiral Ammonium Salt Catalysis

We herein report an asymmetric protocol to access a series of orthogonally functionalized acyclic chiral target molecules containing a quaternary stereogenic center by carrying out the enantioselective α-alkylation of novel orthogonally functionalized dioxolane-containing cyanoacetates under chiral ammonium salt catalysis. By using just 1 mol % of Maruoka's spirocyclic ammonium salt catalysts enantioselectivities up to e.r.=97.5 : 2.5 could be achieved and further functional group manipulations of the products were carried out as well.

Enantioconvergent Substitution Reactions of Racemic Electrophiles by Organocatalysis

Over the past decades, the development of enantioselective catalysis using organocatalysts has evolved into an active research field and a number of enantioselective transformations have been established. However, despite their being a highly desirable process for the synthesis of organic molecules in an enantioenriched form, the enantioconvergent substitution reactions of racemic electrophiles using organocatalysts still present several challenges. Although intrinsic difficulties in the catalytic stereocontrol abound due to the initial chiral information of racemic electrophiles, in recent years, mechanistically diverse enantioconvergent processes have been intensively investigated in organocatalysis. This Minireview focuses on recent achievements in the development of enantioconvergent substitution reactions of racemic electrophiles using organocatalysts. The contents are classified on the basis of the mechanistic types of enantioconvergent processes.

Enantioselective α-Etherification of Branched Aldehydes via an Oxidative Umpolung Strategy

Saturated carbonyl compounds are, via their enolate analogues, inherently nucleophilic at the α-position. In the presence of a benzoquinone oxidant, the polarity of the α-position of racemic α-branched aldehydes is inverted, allowing for an enantioselective etherification using readily available oxygen-based nucleophiles and an amino acid-derived primary amine catalyst. A survey of benzoquinone oxidants identified p-fluoranil and DDQ as suitable reaction partners. p-Fluoranil enables the preparation of α-aryloxylated aldehydes using phenol nucleophiles in up to 91 % ee, following either a one-step or a two-step, one-pot protocol. DDQ allows for a more general etherification protocol in combination with a broader range of alcohol nucleophiles with enantioselectivities up to 95 % ee. Control experiments and isolation of a key quinol intermediate supports a mechanism proceeding via an S_N 2 dynamic-kinetic resolution. These studies provide the basis for an aminocatalytic umpolung concept that allows for the asymmetric construction of tertiary ethers in the α-position of aldehydes.

Highly Enantioselective Synthesis of Fused Tri- and Tetrasubstituted Aziridines: aza-Darzens Reaction of Cyclic Imines with α-Halogenated Ketones Catalyzed by Bifunctional Phosphonium Salt

The first enantioselective aza-Darzens reaction of cyclic imines with α-halogenated ketones was realized under mild reaction conditions by using amino-acid-derived bifunctional phosphonium salts as phase-transfer promoters. A variety of structurally dense tri- and tetrasubstituted aziridine derivatives, containing benzofused heterocycles as well as spiro-structures, were readily synthesized in high yields with excellent diastereo- and enantioselectivities (up to >20:1 d.r. and >99.9 % ee). The highly functionalized aziridine products could be easily transformed into different classes of biologically active compounds.

Catalytic synthesis of chloroacetates with thermoregulated ionic liquids based on vanadium-substituted polyoxometalate

A series of polyoxometalate-based ionic liquid (POM-IL) catalysts with functional sulfonic acid groups, [TEAPS]_3+nPW_12−nV_nO₄₀ (n = 1, 2, 3) were synthesized and characterized by nuclear magnetic resonance spectroscopy (NMR), Fourier transform infrared spectrophotometry (FT-IR), UV-Vis spectrophotometry (UV), potentiometric titration and thermogravimetry-differential scanning calorimetry (TG-DSC). The catalytic ability and reusability of the POM-IL catalysts were evaluated on esterification of chloroacetic acid and n-amyl alcohol. The optimum reaction conditions, 0.2 g of the catalyst amount, 10 mL of water carrier, 140 °C of reaction temperature, and 1.2/1 of the molar ratio of alcohol/acid, were obtained by an orthogonal test. [TEAPS]₅PW₁₀V₂O₄₀ was found to be the best active catalyst with an esterification rate of 98.75% and could be reused five times without significant decrease in activity. The ionic liquid acted as a temperature-responsive catalyst, forming a homogeneous mixture with the reactants at reaction temperature, and could be precipitated and separated from products when the reaction ends at ambient temperature. Therefore, an environmentally friendly and highly efficient approach for the synthesis of chloroacetates is provided.

The ionic liquid catalyst [TEAPS]₅PW₁₀V₂O₄₀ exhibited good activity and reusability in the esterification process owing to its acidity and thermoregulated properties.

Added-Value Surfactants

Surfactants are ubiquitous in cellular membranes, detergents or as emulsification agents. Due to their amphiphilic properties, they cannot only mediate between two domains of very different solvent compatibility like water and organic but also show fascinating self-assembly features resulting in micelles, vesicles, or lyotropic liquid crystals. The current review article highlights some approaches towards the next generation surfactants, for example, those with catalytically active heads. Furthermore, it is shown that amphiphilic properties can be obtained beyond the classical hydrophobic-hydrophilic interplay, for instance with surfactants containing one molecular block with a special shape. Whereas, classical surfactants are static, researchers have become more interested in species that are able to change their properties depending on external triggers. The article discusses examples for surfactants sensitive to chemical (e.g., pH value) or physical triggers (temperature, electric and magnetic fields).

C-H Activation Enables a Concise Total Synthesis of Quinine and Analogues with Enhanced Antimalarial Activity

We report a novel approach to the classical natural product quinine that is based on two stereoselective key steps, namely a C-H activation and an aldol reaction, to unite the two heterocyclic moieties of the target molecule. This straightforward and flexible strategy enables a concise synthesis of natural (-)-quinine, the first synthesis of unnatural (+)-quinine, and also provides access to unprecedented C3-aryl analogues, which were prepared in only six steps. We additionally demonstrate that these structural analogues exhibit improved antimalarial activity compared with (-)-quinine both in vitro and in mice infected with Plasmodium berghei.

Hybrid Surfactants with N-Heterocyclic Carbene Heads as a Multifunctional Platform for Interfacial Catalysis

Processing of substrates with different solvent compatibility is a persistent problem in homogeneous catalysis, in particular when one starting compound is water soluble and the other is not. A promising concept reported in the literature is micellar catalysis. However, the process of developing catalysts that are surfactants at the same time is still in its early stages. We report the synthesis of a new surfactant system with an N‐heterocyclic carbene (NHC) moiety as a head group. Characteristic surfactant properties such as the formation of micelles or liquid crystals is documented. The new surfactant ligand forms coordination compounds with various metals, most importantly Pd²⁺, in square planar geometry. In addition, the Pd‐NHC compound shows surfactant features, and can be used successfully for C−C cross‐coupling reactions (Suzuki, Heck). The boost in catalytic activity by one order of magnitude compared to analogous but non‐amphiphilic species is reported.

Chiral Tertiary Sulfonium Salts as Effective Catalysts for Asymmetric Base-Free Neutral Phase-Transfer Reactions

Although chiral quaternary ammonium and phosphonium salts are commonly used for asymmetric organocatalysis, the catalytic ability of chiral tertiary sulfonium salts has yet to be demonstrated in asymmetric synthesis. Herein, we show that chiral bifunctional trialkylsulfonium salts catalyze highly enantioselective conjugate additions of 3-substituted oxindoles to maleimides under base-free neutral phase-transfer conditions.