A Seed-Based Diffusion Route to Monodisperse Intermetallic CuAu Nanocrystals

Intermetallic Nanocrystals: Seed-Mediated Synthesis and Applications in Electrocatalytic Reduction Reactions

In recent years, intermetallic nanocrystals (IMNCs) have attracted extensive attention in the field of electrocatalysis. However, precise control over the size, shape, composition, structure, and exposed crystal facet of IMNCs seems to be a challenge to the traditional method of high-temperature annealing although these parameters have a significant effect on the electrocatalytic performance. Controllable synthesis of IMNCs by the wet chemistry method in the liquid phase shows great potential compared with the traditional high-temperature annealing method. In this Review, we attempt to summarize the preparation of IMNCs by the seed-mediated synthesis in the liquid phase, as well as their applications in electrocatalytic reduction reactions. Several representative examples are purposely selected for highlighting the huge potential of the seed-mediated synthesis approach in chemical synthesis. Specifically, we personally perceive the seed-mediated synthesis approach as a promising tool in the future for precise control over the size, shape, composition, structure, and exposed crystal facet of IMNCs.

Hollow Multiple Noble Metallic Nanoalloys by Mercury-Assisted Galvanic Replacement Reaction for Hydrogen Evolution

Hollow multimetallic noble nanoalloys with high surface area/volume ratio, abundant active sites, and relatively effective catalytic activity have attracted considerable research interest. Traditional noble nanoalloys fabricated by hydro-/solvothermal methods usually involve harsh synthetic conditions such as high temperatures and intricate processing. We proposed a simple and mild strategy to synthesize platinum- and palladium-decorated hollow gold-based nanoalloys by the galvanic replacement reaction (GRR) at room temperature using hollow gold nanoparticles as templates and mercury as an intermediate. The hollow gold nanoparticles were essential for increasing the number of surface-active sites of the obtained multimetallic nanoalloys, and the introduction of mercury can eliminate the influence of the electrochemical potential of Pt/Pd with Au in the GRRs, increase alloying degrees, and maintain the nanoalloys that exhibit the hollow nanostructures. The structural characterizations of the hollow nanoalloys were studied by means of high-angle annular dark-field scanning transmission electron microscopy, X-ray photoelectron spectroscopy, and X-ray diffraction. On the basis of the electrochemical catalytic measurements, the platinum-exposed nanoalloys were found to have excellent electrocatalytic activities. Especially in the presence of palladium, owing to the synergistic effect, the quaternary AuHgPdPt hollow nanoalloy displayed a low overpotential of 38 mV at 10 mA cm^-2 with a small Tafel slope of 56.23 mV dec^-1 for the alkaline hydrogen evolution reaction. In addition, this approach not only expands the application range of the galvanic replacement reaction but also provides new ideas for the preparation of multialloys and even high-entropy alloys at room temperature.

Synthesis of Metallic Nanocrystals: From Noble Metals to Base Metals

Metallic nanocrystals exhibit superior properties to their bulk counterparts because of the reduced sizes, diverse morphologies, and controllable exposed crystal facets. Therefore, the fabrication of metal nanocrystals and the adjustment of their properties for different applications have attracted wide attention. One of the typical examples is the fabrication of nanocrystals encased with high-index facets, and research on their magnified catalytic activities and selections. Great accomplishment has been achieved within the field of noble metals such as Pd, Pt, Ag, and Au. However, it remains challenging in the fabrication of base metal nanocrystals such as Ni, Cu, and Co with various structures, shapes, and sizes. In this paper, the synthesis of metal nanocrystals is reviewed. An introduction is briefly given to the metal nanocrystals and the importance of synthesis, and then commonly used synthesis methods for metallic nanocrystals are summarized, followed by specific examples of metal nanocrystals including noble metals, alloys, and base metals. The synthesis of base metal nanocrystals is far from satisfactory compared to the tremendous success achieved in noble metals. Afterwards, we present a discussion on specific synthesis methods suitable for base metals, including seed-mediated growth, ligand control, oriented attachment, chemical etching, and Oswald ripening, based on the comprehensive consideration of thermodynamics, kinetics, and physical restrictions. At the end, conclusions are drawn through the prospect of the future development direction.

Ordered PdCu-Based Nanoparticles as Bifunctional Oxygen-Reduction and Ethanol-Oxidation Electrocatalysts

The development of superior non-platinum electrocatalysts for enhancing the electrocatalytic activity and stability for the oxygen-reduction reaction (ORR) and liquid fuel oxidation reaction is very important for the commercialization of fuel cells, but still a great challenge. Herein, we demonstrate a new colloidal chemistry technique for making structurally ordered PdCu-based nanoparticles (NPs) with composition control from PdCu to PdCuNi and PtCuCo. Under the dual tuning on the composition and intermetallic phase, the ordered PdCuCo NPs exhibit better activity and much enhanced stability for ORR and ethanol-oxidation reaction (EOR) than those of disordered PdCuM NPs, the commercial Pt/C and Pd/C catalysts. The density functional theory (DFT) calculations reveal that the improved ORR activity on the PdCuM NPs stems from the catalytically active hollow sites arising from the ligand effect and the compressive strain on the Pd surface owing to the smaller atomic size of Cu, Co, and Ni.

Bottom-Up Nanofabrication of Supported Noble Metal Alloy Nanoparticle Arrays for Plasmonics

Mixing different elements at the nanoscale to obtain alloy nanostructures with fine-tuned physical and chemical properties offers appealing opportunities for nanotechnology and nanoscience. However, despite widespread successful application of alloy nanoparticles made by colloidal synthesis in heterogeneous catalysis, nanoalloy systems have been used very rarely in solid-state devices and nanoplasmonics-related applications. One reason is that such applications require integration in arrays on a surface with compelling demands on nanoparticle arrangement, uniformity in surface coverage, and optimization of the surface density. These cannot be fulfilled even using state-of-the-art self-assembly strategies of colloids. As a solution, we present here a generic bottom-up nanolithography-compatible fabrication approach for large-area arrays of alloy nanoparticles on surfaces. To illustrate the concept, we focus on Au-based binary and ternary alloy systems with Ag, Cu, and Pd, due to their high relevance for nanoplasmonics and complete miscibility, and characterize their optical properties. Moreover, as an example for the relevance of the obtained materials for integration in devices, we demonstrate the superior and hysteresis-free plasmonic hydrogen-sensing performance of the AuPd alloy nanoparticle system.

Au1−xCux colloidal nanoparticles synthesized via a one-pot approach: understanding the temperature effect on the Au : Cu ratio

Au_1−xCu_x alloy nanoparticles synthesized by one-pot colloidal method with an accurate control of composition by the temperature and insights about the mechanism.

A New Core/Shell NiAu/Au Nanoparticle Catalyst with Pt-like Activity for Hydrogen Evolution Reaction

We report a general approach to NiAu alloy nanoparticles (NPs) by co-reduction of Ni(acac)2 (acac = acetylacetonate) and HAuCl4·3H2O at 220 °C in the presence of oleylamine and oleic acid. Subject to potential cycling between 0.6 and 1.0 V (vs reversible hydrogen electrode) in 0.5 M H2SO4, the NiAu NPs are transformed into core/shell NiAu/Au NPs that show much enhanced catalysis for hydrogen evolution reaction (HER) with Pt-like activity and much robust durability. The first-principles calculations suggest that the high activity arises from the formation of Au sites with low coordination numbers around the shell. Our synthesis is not limited to NiAu but can be extended to FeAu and CoAu as well, providing a general approach to MAu/Au NPs as a class of new catalyst superior to Pt for water splitting and hydrogen generation.

Core/shell Au/MnO nanoparticles prepared through controlled oxidation of AuMn as an electrocatalyst for sensitive H2O2 detection

Monodisperse 5 nm AuMn nanoparticles were synthesized by hydride reduction of manganese acetylacetonate in the presence of Au nanoparticles. The alloy was formed through fast Mn diffusion into the Au structure. The AuMn nanoparticles were converted to Au-MnO composite particles through air annealing at 170 °C. These Au-MnO particles, especially the core/shell Au/MnO nanoparticles, were active for the electrochemical reduction of H2 O2 , with a detection limit reaching 8 nM. This highly sensitive electrochemical sensor based on the Au/MnO nanoparticles was used to monitor H2 O2 concentrations released from living cells, from which tumorigenic cells were discovered to release higher levels of H2 O2 than the non-tumorigenic cells.

Plasmon dynamics in colloidal Au₂Cd alloy-CdSe core/shell nanocrystals

Metal-semiconductor nanocrystal heterostructures are model systems for understanding the interplay between the localized surface plasmon resonances in the metal domain and the relaxation of the excited carriers in the semiconductor domain. Here we report the synthesis of colloidal Au₂Cd (core)/CdSe (shell) nanocrystal heterostructures, which were characterized extensively with several structural and optical techniques, including time-resolved fluorescence and broad-band transient absorption spectroscopy (both below and above the CdSe band gap). The dynamics of the transient plasmon peak was dominated by the relaxation of hot carriers in the metal core, its spectral shape was independent of the pump wavelength, and the bleaching lifetime was about half a picosecond, comparable with the value found in the AuCd seeds used for the synthesis.

Recent progress in the synthesis of inorganic nanoparticles

Nanoparticles probably constitute the largest class of nanomaterials. Nanoparticles of several inorganic materials have been prepared by employing a variety of synthetic strategies. Besides synthesizing nanoparticles, there has been considerable effort to selectively prepare nanoparticles of different shapes. In view of the great interest in inorganic nanoparticles evinced in the last few years, we have prepared this perspective on the present status of the synthesis of inorganic nanoparticles. This article includes a brief discussion of methods followed by reports on the synthesis of nanoparticles of various classes of inorganic materials such as metals, alloys, oxides chalcogenides and pnictides. A brief section on core-shell nanoparticles is also included.