1
|
Wang S, Zhao Z, Yu Q, Li P, Zhou F, Xu C, Zhao X, Teng Y. Superdurable Full-Life Superhydrophobic Composite Block. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2024:e2403853. [PMID: 38718418 DOI: 10.1002/adma.202403853] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/15/2024] [Revised: 04/28/2024] [Indexed: 05/18/2024]
Abstract
Superhydrophobic materials are attractive for industrial development but plagued by poor mechanical stability. Herein, a superdurable full-life superhydrophobic composite block is designed and fabricated by embedding near-zero contractive superhydrophobic silica aerogel into a rigid iron-nickel foam structured similarly to a regular dodecahedron. The synergistic protection afforded by these materials ensures superrobust mechanical stability for the composite block, which features a high compressive strength of up to ≈7.4 MPa, and ultralow Taber abrasion of down to ≈0.567 mm after withstanding 50 000 cycles, and highly efficient water harvesting capability of up to ≈3114.3 mg min-1 cm-2 at a supercooling degree of 40 K. This robust material system provides a novel strategy to design superhydrophobic materials capable of withstanding extreme conditions, including high temperature, humidity, pressure, and abrasion.
Collapse
Affiliation(s)
- Shanlin Wang
- State Key Laboratory for Environment-Friendly Energy Materials, School of Materials and Chemistry, Southwest University of Science and Technology, Mianyang, 621010, P. R. China
- Engineering Research Center of Biomass Materials, Ministry of Education, Southwest University of Science and Technology, Mianyang, 621010, P. R. China
| | - Zhimeng Zhao
- State Key Laboratory for Environment-Friendly Energy Materials, School of Materials and Chemistry, Southwest University of Science and Technology, Mianyang, 621010, P. R. China
| | - Qiang Yu
- State Key Laboratory for Environment-Friendly Energy Materials, School of Materials and Chemistry, Southwest University of Science and Technology, Mianyang, 621010, P. R. China
| | - Pengfei Li
- State Key Laboratory for Environment-Friendly Energy Materials, School of Materials and Chemistry, Southwest University of Science and Technology, Mianyang, 621010, P. R. China
| | - Fei Zhou
- State Key Laboratory for Environment-Friendly Energy Materials, School of Materials and Chemistry, Southwest University of Science and Technology, Mianyang, 621010, P. R. China
| | - Chao Xu
- Center for Analysis, Measurement and Computing, Harbin Institute of Technology, Harbin, 150001, P. R. China
| | - Xiaofeng Zhao
- State Key Laboratory for Environment-Friendly Energy Materials, School of Materials and Chemistry, Southwest University of Science and Technology, Mianyang, 621010, P. R. China
| | - Yuancheng Teng
- State Key Laboratory for Environment-Friendly Energy Materials, School of Materials and Chemistry, Southwest University of Science and Technology, Mianyang, 621010, P. R. China
| |
Collapse
|
2
|
Wang Y, Fan Y, Liu H, Wang S, Liu L, Dou Y, Huang S, Li J, Tian X. Design of highly robust super-liquid-repellent surfaces that can resist high-velocity impact of low-surface-tension liquids. LAB ON A CHIP 2024; 24:1658-1667. [PMID: 38299611 DOI: 10.1039/d3lc00966a] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/02/2024]
Abstract
Super-liquid-repellent surfaces capable of preventing wetting with various liquids have tremendous application. However, high liquid repellency relies on surface texturing to minimize the solid-liquid interfacial contact, which generally results in impaired interface robustness and pressure resistance. Consequently, the surface tends to undergo a Cassie-Baxter to Wenzel wetting transition and loses liquid repellency under high-velocity liquid impact, especially for low-surface-tension liquids. Here, surface design through combining the nanoscale effect and doubly reentrant structure is demonstrated to solve the above challenge. By utilizing a facile colloidal lithography process, robust liquid repellent surfaces featuring nanoscale doubly reentrant (NDR) structures are constructed. The nanoscale features ensure sufficient triple contact line density at a low solid-liquid contact fraction to enhance the capillary force for liquid suspension. In conjunction with the doubly reentrant topography that maximizes the upward component of capillary force, such NDR surfaces enable an extremely robust solid-liquid-gas composite interface. As a result, the prepared NDR surface maintain excellent repellency upon high-velocity impact of various liquids, including ethylene glycol drops with a Weber number (We) above 306 and ethanol drops with a We of 57. The above findings can help the development of super-liquid-repellent surfaces applicable to harsh conditions of high-velocity liquid impact or high hydrostatic pressure.
Collapse
Affiliation(s)
- Yingke Wang
- School of Materials Science and Engineering, Key Laboratory for Polymeric Composite & Functional Materials of Ministry of Education, Guangzhou Key Laboratory of Flexible Electronic Materials and Wearable Devices, Sun Yat-Sen University, Guangzhou 510006, China.
- State Key Laboratory of Optoelectronic Materials and Technologies, Sun Yat-Sen University, Guangzhou 510006, China
| | - Yue Fan
- School of Materials Science and Engineering, Key Laboratory for Polymeric Composite & Functional Materials of Ministry of Education, Guangzhou Key Laboratory of Flexible Electronic Materials and Wearable Devices, Sun Yat-Sen University, Guangzhou 510006, China.
- State Key Laboratory of Optoelectronic Materials and Technologies, Sun Yat-Sen University, Guangzhou 510006, China
| | - Hongtao Liu
- School of Materials Science and Engineering, Key Laboratory for Polymeric Composite & Functional Materials of Ministry of Education, Guangzhou Key Laboratory of Flexible Electronic Materials and Wearable Devices, Sun Yat-Sen University, Guangzhou 510006, China.
- State Key Laboratory of Optoelectronic Materials and Technologies, Sun Yat-Sen University, Guangzhou 510006, China
| | - Shuai Wang
- School of Materials Science and Engineering, Key Laboratory for Polymeric Composite & Functional Materials of Ministry of Education, Guangzhou Key Laboratory of Flexible Electronic Materials and Wearable Devices, Sun Yat-Sen University, Guangzhou 510006, China.
- State Key Laboratory of Optoelectronic Materials and Technologies, Sun Yat-Sen University, Guangzhou 510006, China
| | - Lin Liu
- State Key Laboratory of Optoelectronic Materials and Technologies, Sun Yat-Sen University, Guangzhou 510006, China
| | - Yingying Dou
- School of Materials Science and Engineering, Key Laboratory for Polymeric Composite & Functional Materials of Ministry of Education, Guangzhou Key Laboratory of Flexible Electronic Materials and Wearable Devices, Sun Yat-Sen University, Guangzhou 510006, China.
- State Key Laboratory of Optoelectronic Materials and Technologies, Sun Yat-Sen University, Guangzhou 510006, China
| | - Shilin Huang
- School of Materials Science and Engineering, Key Laboratory for Polymeric Composite & Functional Materials of Ministry of Education, Guangzhou Key Laboratory of Flexible Electronic Materials and Wearable Devices, Sun Yat-Sen University, Guangzhou 510006, China.
- State Key Laboratory of Optoelectronic Materials and Technologies, Sun Yat-Sen University, Guangzhou 510006, China
| | - Juan Li
- School of Materials Science and Engineering, Key Laboratory for Polymeric Composite & Functional Materials of Ministry of Education, Guangzhou Key Laboratory of Flexible Electronic Materials and Wearable Devices, Sun Yat-Sen University, Guangzhou 510006, China.
- State Key Laboratory of Optoelectronic Materials and Technologies, Sun Yat-Sen University, Guangzhou 510006, China
- School of Traditional Chinese Medicine Resources, Guangdong Pharmaceutical University, Guangzhou 510006, China.
| | - Xuelin Tian
- School of Materials Science and Engineering, Key Laboratory for Polymeric Composite & Functional Materials of Ministry of Education, Guangzhou Key Laboratory of Flexible Electronic Materials and Wearable Devices, Sun Yat-Sen University, Guangzhou 510006, China.
- State Key Laboratory of Optoelectronic Materials and Technologies, Sun Yat-Sen University, Guangzhou 510006, China
| |
Collapse
|
3
|
Rasitha TP, Krishna NG, Anandkumar B, Vanithakumari SC, Philip J. A comprehensive review on anticorrosive/antifouling superhydrophobic coatings: Fabrication, assessment, applications, challenges and future perspectives. Adv Colloid Interface Sci 2024; 324:103090. [PMID: 38290251 DOI: 10.1016/j.cis.2024.103090] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/08/2023] [Revised: 01/16/2024] [Accepted: 01/16/2024] [Indexed: 02/01/2024]
Abstract
Superhydrophobicity (SHP) is an incredible phenomenon of extreme water repellency of surfaces ubiquitous in nature (E.g. lotus leaves, butterfly wings, taro leaves, mosquito eyes, water-strider legs, etc). Historically, surface exhibiting water contact angle (WCA) > 150° and contact angle hysteresis <10° is considered as SHP. The SHP surfaces garnered considerable attention in recent years due to their applications in anti-corrosion, anti-fouling, self-cleaning, oil-water separation, viscous drag reduction, anti-icing, etc. As corrosion and marine biofouling are global problems, there has been focused efforts in combating these issues using innovative environmentally friendly coatings designs taking cues from natural SHP surfaces. Over the last two decades, though significant progress has been made on the fabrication of various SHP surfaces, the practical adaptation of these surfaces for various applications is hampered, mainly because of the high cost, non-scalability, lack of simplicity, non-adaptability for a wide range of substrates, poor mechanical robustness and chemical inertness. Despite the extensive research, the exact mechanism of corrosion/anti-fouling of such coatings also remains elusive. The current focus of research in recent years has been on the development of facile, eco-friendly, cost-effective, mechanically robust chemically inert, and scalable methods to prepare durable SHP coating on a variety of surfaces. Although there are some general reviews on SHP surfaces, there is no comprehensive review focusing on SHP on metallic and alloy surfaces with corrosion-resistant and antifouling properties. This review is aimed at filling this gap. This review provides a pedagogical description with the necessary background, key concepts, genesis, classical models of superhydrophobicity, rational design of SHP, coatings characterization, testing approaches, mechanisms, and novel fabrication approaches currently being explored for anticorrosion and antifouling, both from a fundamental and practical perspective. The review also provides a summary of important experimental studies with key findings, and detailed descriptions of the evaluation of surface morphologies, chemical properties, mechanical, chemical, corrosion, and antifouling properties. The recent developments in the fabrication of SHP -Cr-Mo steel, Ti, and Al are presented, along with the latest understanding of the mechanism of anticorrosion and antifouling properties of the coating also discussed. In addition, different promising applications of SHP surfaces in diverse disciplines are discussed. The last part of the review highlights the challenges and future directions. The review is an ideal material for researchers practicing in the field of coatings and also serves as an excellent reference for freshers who intend to begin research on this topic.
Collapse
Affiliation(s)
- T P Rasitha
- Corrosion Science and Technology Division, Materials Characterization Group, Indira Gandhi Centre for Atomic Research, Kalpakkam 603102, India
| | - Nanda Gopala Krishna
- Corrosion Science and Technology Division, Materials Characterization Group, Indira Gandhi Centre for Atomic Research, Kalpakkam 603102, India
| | - B Anandkumar
- Corrosion Science and Technology Division, Materials Characterization Group, Indira Gandhi Centre for Atomic Research, Kalpakkam 603102, India; Homi Bhabha National Institute, Kalpakkam 603102, India
| | - S C Vanithakumari
- Corrosion Science and Technology Division, Materials Characterization Group, Indira Gandhi Centre for Atomic Research, Kalpakkam 603102, India; Homi Bhabha National Institute, Kalpakkam 603102, India
| | - John Philip
- Corrosion Science and Technology Division, Materials Characterization Group, Indira Gandhi Centre for Atomic Research, Kalpakkam 603102, India; Homi Bhabha National Institute, Kalpakkam 603102, India.
| |
Collapse
|
4
|
Wei Y, Wang F, Guo Z. Bio-inspired and metal-derived superwetting surfaces: Function, stability and applications. Adv Colloid Interface Sci 2023; 314:102879. [PMID: 36934513 DOI: 10.1016/j.cis.2023.102879] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/03/2022] [Revised: 02/19/2023] [Accepted: 03/07/2023] [Indexed: 03/14/2023]
Abstract
Due to their exceptional anti-icing, anti-corrosion, and anti-drag qualities, biomimetic metal-derived superwetting surfaces, which are widely employed in the aerospace, automotive, electronic, and biomedical industries, have raised significant concern. However, further applications in other domains have been hampered by the poor mechanical and chemical durability of superwetting metallic surfaces, which can result in metal fatigue and corrosion. The potential for anti-corrosion, anti-contamination, anti-icing, oil/water separation, and oil transportation on surfaces with superwettability has increased in recent years due to the advancement of research in biomimetic superwetting interface theory and practice. Recent developments in functionalized biomimetic metal-derived superwetting surfaces were summarized in this paper. Firstly, a detailed presentation of biomimetic metal-derived superwetting surfaces with unique capabilities was made. The problems with the long-term mechanical and chemical stability of biomimetic metal-derived superwetting surfaces were then examined, along with potential solutions. Finally, in an effort to generate fresh concepts for the study of biomimetic metal-derived superwetting surfaces, the applications of superwetting metallic surfaces in various domains were discussed in depth. The future direction of biomimetic metal-derived superwetting surfaces was also addressed.
Collapse
Affiliation(s)
- Yuren Wei
- Ministry of Education Key Laboratory for the Green Preparation and Application of Functional Materials, School of Materials Science & Engineering, Hubei Key Laboratory of Polymer Materials, Hubei University, Wuhan 430062, China
| | - Fengyi Wang
- Ministry of Education Key Laboratory for the Green Preparation and Application of Functional Materials, School of Materials Science & Engineering, Hubei Key Laboratory of Polymer Materials, Hubei University, Wuhan 430062, China.
| | - Zhiguang Guo
- Ministry of Education Key Laboratory for the Green Preparation and Application of Functional Materials, School of Materials Science & Engineering, Hubei Key Laboratory of Polymer Materials, Hubei University, Wuhan 430062, China; State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000, China.
| |
Collapse
|
5
|
Zaman Khan M, Militky J, Petru M, Tomková B, Ali A, Tören E, Perveen S. Recent advances in superhydrophobic surfaces for practical applications: A review. Eur Polym J 2022. [DOI: 10.1016/j.eurpolymj.2022.111481] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/04/2022]
|
6
|
Wang X, Xu B, Chen Z, Del Col D, Li D, Zhang L, Mou X, Liu Q, Yang Y, Cao Q. Review of droplet dynamics and dropwise condensation enhancement: Theory, experiments and applications. Adv Colloid Interface Sci 2022; 305:102684. [PMID: 35525088 DOI: 10.1016/j.cis.2022.102684] [Citation(s) in RCA: 7] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/02/2021] [Revised: 03/21/2022] [Accepted: 04/23/2022] [Indexed: 02/06/2023]
Abstract
Droplet dynamics and condensation phenomena are widespread in nature and industrial applications, and the fundamentals of various technological applications. Currently, with the rapid development of interfacial materials, microfluidics, micro/nano fabrication technology, as well as the intersection of fluid mechanics, interfacial mechanics, heat and mass transfer, thermodynamics and reaction kinetics and other disciplines, the preparation and design of various novel functional surfaces have contributed to the local modulation of droplets (including nucleation, jumping and directional migration) and the improvement of condensation heat transfer, further deepening the understanding of relevant mechanisms. The wetting and dynamic characteristics of droplets involve complex solid-liquid interfacial interactions, so that the local modulation of microdroplets and the extension of enhanced condensation heat transfer by means of complex micro/nano structures and hydrophilic/hydrophobic properties is one of the current hot topics in heat and mass transfer research. This work presents a detailed review of several scientific issues related to the droplet dynamics and dropwise condensation heat transfer under the influence of multiple factors (including fluid property, surface structure, wettability, temperature external field, etc.). Firstly, the basic theory of droplet wetting on the solid wall is introduced, and the mechanism of solid-liquid interfacial interaction involving droplet jumping and directional migration on the functional surfaces under the various influencing factors is discussed. Optimizing the surface structure for the local modulation of droplets is of guidance for condensation heat transfer. Secondly, we summarize the existing theoretical models of dropwise condensation applicable to various functional surfaces and briefly outline the current numerical models for simulating dropwise condensation at different scales, as well as the fabricating techniques of coatings and functional surfaces for enhancing heat transfer. Finally, the relevant problems and challenges are summarized and future research is discussed.
Collapse
Affiliation(s)
- Xin Wang
- School of Energy and Environment, Southeast University, Nanjing, PR China
| | - Bo Xu
- School of Energy and Environment, Southeast University, Nanjing, PR China
| | - Zhenqian Chen
- School of Energy and Environment, Southeast University, Nanjing, PR China; Key Laboratory of Energy Thermal Conversion and Control of Ministry of Education, School of Energy and Environment, Southeast University, Nanjing, PR China; Jiangsu Provincial Key Laboratory of Solar Energy Science and Technology, School of Energy and Environment, Southeast University, Nanjing, PR China.
| | - Davide Del Col
- Department of Industrial Engineering, University of Padua, Italy
| | - Dong Li
- School of Energy and Power Engineering, Zhengzhou University of Light Industry, Zhengzhou, PR China
| | - Leigang Zhang
- School of Energy and Mechanical Engineering, Nanjing Normal University, Nanjing, PR China
| | - Xinzhu Mou
- School of Energy and Environment, Southeast University, Nanjing, PR China
| | - Qiusheng Liu
- Key Laboratory of Microgravity, Institute of Mechanics, Chinese Academy of Sciences, Beijing, PR China
| | - Yang Yang
- Engineering and technology center for space applications, Chinese academy of sciences, Beijing, PR China
| | - Qian Cao
- Engineering and technology center for space applications, Chinese academy of sciences, Beijing, PR China
| |
Collapse
|
7
|
Zhang P, Qin B, Xia J. UV Curable Robust Durable Hydrophobic Coating Based on Epoxy Polyhedral Oligomeric Silsesquioxanes (EP-POSS) and Their Derivatives. ACS OMEGA 2022; 7:17108-17118. [PMID: 35647429 PMCID: PMC9134229 DOI: 10.1021/acsomega.2c00534] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 01/26/2022] [Accepted: 04/13/2022] [Indexed: 06/15/2023]
Abstract
Hydrophobic coatings have considerable potential applications in many fields. Ease of operation and high durability are essential for practical use. Fast curing and being solvent-free are a plus, and if they possess certain characteristics (antigraffiti, good adhesion, high hardness, heat resistance, wide range of applicability, etc.) at the same time, it is a dream solution. Herein, a facile one-step approach with the above features was reported for a UV curable robust hydrophobic coating based on Epoxy Polyhedral Oligomeric Silsesquioxanes (EP-POSSs). The structure and surface morphology of these EP-POSSs and their derivatives were systematically studied. Because of the core-in-cage structure which was constructed by repeating units of R-Si(O1/2)3 and the strong covalent bonds of Si-C and Si-O, the coatings displayed high pencil hardness (6-8H), high thermal stability with initial decomposition temperature around 350-400 °C, and a high water contact angle (up to 108.06°) even after outdoor exposure for a month. These POSSs and their derivatives are expected to find uses in various applications such as stain resistance, self-cleaning, scratch resistance, and cigarette moxibustion resistance of wood furniture, kitchenware, and medical and industrial appliances.
Collapse
Affiliation(s)
- Peng Zhang
- South
China Advanced Institute for Soft Matter Science and Technology (AISMST),
School of Emergent Soft Matter, South China
University of Technology, Guangzhou 510640, People’s Republic
of China
- Guangdong
Provincial Key Laboratory of Functional and Intelligent Hybrid Materials
and Devices, South China University of Technology, Guangzhou 510640, People’s Republic of China
| | - Ban Qin
- South
China Advanced Institute for Soft Matter Science and Technology (AISMST),
School of Emergent Soft Matter, South China
University of Technology, Guangzhou 510640, People’s Republic
of China
- Guangdong
Provincial Key Laboratory of Functional and Intelligent Hybrid Materials
and Devices, South China University of Technology, Guangzhou 510640, People’s Republic of China
| | - Jianhui Xia
- South
China Advanced Institute for Soft Matter Science and Technology (AISMST),
School of Emergent Soft Matter, South China
University of Technology, Guangzhou 510640, People’s Republic
of China
- Guangdong
Provincial Key Laboratory of Functional and Intelligent Hybrid Materials
and Devices, South China University of Technology, Guangzhou 510640, People’s Republic of China
| |
Collapse
|
8
|
Bai X, Yang Q, Li H, Huo J, Liang J, Hou X, Chen F. Sunlight Recovering the Superhydrophobicity of a Femtosecond Laser-Structured Shape-Memory Polymer. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2022; 38:4645-4656. [PMID: 35378041 DOI: 10.1021/acs.langmuir.2c00167] [Citation(s) in RCA: 6] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/14/2023]
Abstract
Superhydrophobic surfaces have aroused increasing attentions in the fields of self-cleaning, anti-fouling, heat transfer, etc. However, one of the major problems of the artificial superhydrophobic surface in practical applications is the poor durability. Inspired by the self-healing property of nature organism, we developed a sunlight-driven recoverable superhydrophobic surface by femtosecond laser constructing micropillar array on the surface of the photo-responsive shape-memory polymer (SMP). The photo-responsive SMP composite was prepared by adding reduced graphene oxide (RGO) into thermal-responsive SMP matrix. Due to the excellent sunlight-to-heat transformation property of RGO, the temperature of the as-fabricated RGO-SMP composite could be rapidly increased above the shape transformation temperature of the RGO-SMP under one sunlight irradiation. Once the micropillar array of the RGO-SMP composite was deformed by pressing or stretching treatments, the surface would lose superhydrophobicity. Upon sunlight irradiation, the surface morphology and the wettability of the RGO-SMP micropillars could completely recover to the original states. Meanwhile, this reversible morphology and wettability transformation process could be repeated multiple times. We envision that such a sunlight-recoverable superhydrophobic surface will have great applications in the future.
Collapse
Affiliation(s)
- Xue Bai
- State Key Laboratory for Manufacturing System Engineering and Shaanxi Key Laboratory of Photonics Technology for Information, School of Electronic Science and Engineering, Xi'an Jiaotong University, Xi'an 710049, PR China
| | - Qing Yang
- School of Mechanical Engineering, Xi'an Jiaotong University, Xi'an 710049, PR China
| | - Haoyu Li
- State Key Laboratory for Manufacturing System Engineering and Shaanxi Key Laboratory of Photonics Technology for Information, School of Electronic Science and Engineering, Xi'an Jiaotong University, Xi'an 710049, PR China
| | - Jinglan Huo
- State Key Laboratory for Manufacturing System Engineering and Shaanxi Key Laboratory of Photonics Technology for Information, School of Electronic Science and Engineering, Xi'an Jiaotong University, Xi'an 710049, PR China
| | - Jie Liang
- State Key Laboratory for Manufacturing System Engineering and Shaanxi Key Laboratory of Photonics Technology for Information, School of Electronic Science and Engineering, Xi'an Jiaotong University, Xi'an 710049, PR China
| | - Xun Hou
- State Key Laboratory for Manufacturing System Engineering and Shaanxi Key Laboratory of Photonics Technology for Information, School of Electronic Science and Engineering, Xi'an Jiaotong University, Xi'an 710049, PR China
| | - Feng Chen
- State Key Laboratory for Manufacturing System Engineering and Shaanxi Key Laboratory of Photonics Technology for Information, School of Electronic Science and Engineering, Xi'an Jiaotong University, Xi'an 710049, PR China
| |
Collapse
|
9
|
Baig N, Salhi B, Sajid M, Aljundi IH. Recent Progress in Microfiltration/Ultrafiltration Membranes for Separation of Oil and Water Emulsions. CHEM REC 2022; 22:e202100320. [PMID: 35189025 DOI: 10.1002/tcr.202100320] [Citation(s) in RCA: 6] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/12/2021] [Revised: 02/08/2022] [Indexed: 01/18/2023]
Abstract
Oily wastewater has become one of the leading causes of environmental pollution. A massive quantity of oily wastewater is released from industries, oil spills, and routine activities, endangering the ecosystem's sustainability. Due to the enormous negative impact, researchers put strenuous efforts into developing a sustainable solution to treat oily wastewater. Microfiltration/ultrafiltration membranes are considered an efficient solution to treat oily wastewater due to their low cost, small footprint, facile operation, and high separation efficiencies. However, membranes severely fouled during the separation process due to oil's adsorption and cake layer formation, which shortens the membranes' life. This review has critically discussed the microfiltration/ultrafiltration membrane synthesizing methods and their emulsion's separation performance. In the end, key challenges and their possible solutions are highlighted to provide future direction to synthesize next-generation membranes.
Collapse
Affiliation(s)
- Nadeem Baig
- Interdisciplinary Research Center for Membranes and Water Security, King Fahd University of Petroleum and Minerals, Dhahran, 31261, Saudi Arabia
| | - Billel Salhi
- Interdisciplinary Research Center for Membranes and Water Security, King Fahd University of Petroleum and Minerals, Dhahran, 31261, Saudi Arabia
| | - Muhammad Sajid
- Center for Environment and Water, Research Institute, King Fahd University of Petroleum and Minerals, Dhahran, 31261, Saudi Arabia
| | - Isam H Aljundi
- Interdisciplinary Research Center for Membranes and Water Security, King Fahd University of Petroleum and Minerals, Dhahran, 31261, Saudi Arabia.,Chemical Engineering Department, King Fahd University of Petroleum and Minerals, Dhahran, 31261, Saudi Arabia
| |
Collapse
|
10
|
Yoon J, Hou Y, Knoepfel AM, Yang D, Ye T, Zheng L, Yennawar N, Sanghadasa M, Priya S, Wang K. Bio-inspired strategies for next-generation perovskite solar mobile power sources. Chem Soc Rev 2021; 50:12915-12984. [PMID: 34622260 DOI: 10.1039/d0cs01493a] [Citation(s) in RCA: 11] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/24/2022]
Abstract
Smart electronic devices are becoming ubiquitous due to many appealing attributes including portability, long operational time, rechargeability and compatibility with the user-desired form factor. Integration of mobile power sources (MPS) based on photovoltaic technologies with smart electronics will continue to drive improved sustainability and independence. With high efficiency, low cost, flexibility and lightweight features, halide perovskite photovoltaics have become promising candidates for MPS. Realization of these photovoltaic MPS (PV-MPS) with unconventionally extraordinary attributes requires new 'out-of-box' designs. Natural materials have provided promising designing solutions to engineer properties under a broad range of boundary conditions, ranging from molecules, proteins, cells, tissues, apparatus to systems in animals, plants, and humans optimized through billions of years of evolution. Applying bio-inspired strategies in PV-MPS could be biomolecular modification on crystallization at the atomic/meso-scale, bio-structural duplication at the device/system level and bio-mimicking at the functional level to render efficient charge delivery, energy transport/utilization, as well as stronger resistance against environmental stimuli (e.g., self-healing and self-cleaning). In this review, we discuss the bio-inspired/-mimetic structures, experimental models, and working principles, with the goal of revealing physics and bio-microstructures relevant for PV-MPS. Here the emphasis is on identifying the strategies and material designs towards improvement of the performance of emerging halide perovskite PVs and strategizing their bridge to future MPS.
Collapse
Affiliation(s)
- Jungjin Yoon
- Department of Materials Science & Engineering, Pennsylvania State University, University Park, 16802, PA, USA.
| | - Yuchen Hou
- Department of Materials Science & Engineering, Pennsylvania State University, University Park, 16802, PA, USA.
| | - Abbey Marie Knoepfel
- Department of Materials Science & Engineering, Pennsylvania State University, University Park, 16802, PA, USA.
| | - Dong Yang
- Department of Materials Science & Engineering, Pennsylvania State University, University Park, 16802, PA, USA.
| | - Tao Ye
- Department of Materials Science & Engineering, Pennsylvania State University, University Park, 16802, PA, USA.
| | - Luyao Zheng
- Department of Materials Science & Engineering, Pennsylvania State University, University Park, 16802, PA, USA.
| | - Neela Yennawar
- Huck Institute of the Life Sciences, Pennsylvania State University, University Park, 16802, PA, USA
| | - Mohan Sanghadasa
- U.S. Army Combat Capabilities Development Command Aviation & Missile Center, Redstone Arsenal, Alabama, 35898, USA
| | - Shashank Priya
- Department of Materials Science & Engineering, Pennsylvania State University, University Park, 16802, PA, USA.
| | - Kai Wang
- Department of Materials Science & Engineering, Pennsylvania State University, University Park, 16802, PA, USA.
| |
Collapse
|
11
|
Wang P, Chen T, Zhang X, Duan W, Zhang C, Han H, Xie Q. A Superhydrophobic Hydrogel for
Self‐Healing
and Robust Strain Sensor with Liquid Impalement Resistance. CHINESE J CHEM 2021. [DOI: 10.1002/cjoc.202100531] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/09/2023]
Affiliation(s)
- Peng Wang
- School of Energy, Power and Mechanical Engineering North China Electric Power University Baoding Hebei 071003 China
- Hebei Key Laboratory of Electric Machinery Health Maintenance & Failure Prevention North China Electric Power University Baoding Hebei 071003 China
| | - Tao Chen
- School of Energy, Power and Mechanical Engineering North China Electric Power University Baoding Hebei 071003 China
- Hebei Key Laboratory of Electric Machinery Health Maintenance & Failure Prevention North China Electric Power University Baoding Hebei 071003 China
| | - Xuesong Zhang
- School of Energy, Power and Mechanical Engineering North China Electric Power University Baoding Hebei 071003 China
- Hebei Key Laboratory of Electric Machinery Health Maintenance & Failure Prevention North China Electric Power University Baoding Hebei 071003 China
| | - Wei Duan
- School of Energy, Power and Mechanical Engineering North China Electric Power University Baoding Hebei 071003 China
- Hebei Key Laboratory of Electric Machinery Health Maintenance & Failure Prevention North China Electric Power University Baoding Hebei 071003 China
| | - Chongyuan Zhang
- School of Electrical and Electronic Engineering North China Electric Power University Baoding Hebei 071003 China
| | - Huilong Han
- School of Energy, Power and Mechanical Engineering North China Electric Power University Baoding Hebei 071003 China
- Hebei Key Laboratory of Electric Machinery Health Maintenance & Failure Prevention North China Electric Power University Baoding Hebei 071003 China
| | - Qing Xie
- School of Electrical and Electronic Engineering North China Electric Power University Baoding Hebei 071003 China
| |
Collapse
|
12
|
Habib MA, Wu S, Fan Q, Magu TO, Yao X, Lv J, Wang J. Bioinspired in situ repeatable self-recovery of superhydrophobicity by self-reconstructing the hierarchical surface structure. Chem Commun (Camb) 2021; 57:8425-8428. [PMID: 34346409 DOI: 10.1039/d1cc02974f] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
Inspired by the biological self-recovery mechanism of superhydrophobicity, a new class of waxgel material with sustainable hierarchical surface micro-structures has been reported. After being damaged or removed, the waxgel material can self-reconstruct its surface layer both chemically and structurally, as well as successfully recovers its superhydrophobicity. In addition, it shows non-fluorinated composition, durability to severe mechanical challenges, and self-recoverable surface structures without external input of any kind such as; heat, UV, plasma etc., which distinguishes waxgel from any previous self-healing superhydrophobic systems. This strategy will open a new path for improving the long-term functionality of different interfacial materials.
Collapse
Affiliation(s)
- Md Ahsan Habib
- Key Laboratory of Green Printing, Institute of Chemistry, Chinese Academy of Sciences, Beijing 100190, China.
| | | | | | | | | | | | | |
Collapse
|
13
|
Huang J, Yang M, Zhang H, Zhu J. Solvent-Free Fabrication of Robust Superhydrophobic Powder Coatings. ACS APPLIED MATERIALS & INTERFACES 2021; 13:1323-1332. [PMID: 33382573 DOI: 10.1021/acsami.0c16582] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/12/2023]
Abstract
Superhydrophobicity originating from the "lotus effect" enables novel applications such as self-cleaning, anti-fouling, anti-icing, anti-corrosion, and oil-water separation. However, their real-world applications are hindered by some main shortcomings, especially the organic solvent problem, complex chemical modification of nanoparticles, and poor mechanical stability of obtained surfaces. Here, we report for the first time the solvent-free, chemical modification-free, and mechanically, chemically, and UV robust superhydrophobic powder coatings. The coatings were fabricated by adding commercially available polytetrafluoroethylene (PTFE) particles into powder coatings and by following the regular powder-coating processing route. The formation of such superhydrophobic surfaces was attributed to PTFE particles, which hindered the microscale leveling of powder coatings during curing. Through adjusting the dosage of PTFE, the hydrophobicity of obtained coatings can be tuned in a large range (water contact angle from 92 to 162°). The superhydrophobic coatings exhibited remarkable mechanical robustness against abrasion because of the unique hierarchical micro/nanoscale roughness and low surface energy throughout the coating and the solid lubrication effect of PTFE particles. The coatings also have robustness against chemical corrosion and UV irradiation owing to high bonding energy and chemical inertness of PTFE. Moreover, the coatings show attractive performances including self-cleaning, anti-rain, anti-snow, and anti-icing. With these multifaceted features, such superhydrophobic coatings are promising for outdoor applications. This study also contributes to the preparation of robust superhydrophobic surfaces in an environmentally friendly way.
Collapse
Affiliation(s)
- Jinbao Huang
- Department of Chemical and Biochemical Engineering, Western University, London, Ontario N6A 5B9, Canada
| | - Marshall Yang
- Department of Chemical and Biochemical Engineering, Western University, London, Ontario N6A 5B9, Canada
| | - Hui Zhang
- Department of Chemical and Biochemical Engineering, Western University, London, Ontario N6A 5B9, Canada
| | - Jesse Zhu
- Department of Chemical and Biochemical Engineering, Western University, London, Ontario N6A 5B9, Canada
| |
Collapse
|
14
|
Sun Y, Guo Z. Programming Multiphase Media Superwetting States in the Oil-Water-Air System: Evolutions in Hydrophobic-Hydrophilic Surface Heterogeneous Chemistry. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2020; 32:e2004875. [PMID: 33463790 DOI: 10.1002/adma.202004875] [Citation(s) in RCA: 23] [Impact Index Per Article: 5.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/17/2020] [Revised: 08/26/2020] [Indexed: 06/12/2023]
Abstract
Studies toward tailoring macroscopic extreme wetting behaviors on a certain well-defined surface in multiphase media are significant but still at an infant stage. Herein, superantiwetting evolutions in the oil-water-air system can be programmed from single to quadruple superrepellence by controlling the surface hydrophobic-hydrophilic heterogeneous chemistry. Ammonia vapor exposure makes the realization of challenging superhydrophilicity-superoleophobicity possible in air medium, causing the transition from quadruple to triple superantiwetting states in the oil-water-air system. Upon UV illumination, only single superrepellence-underwater superoleophobicity is maintained on titanium dioxide (TiO2, P25)-based coatings. A reversible transition between underoil superhydrophilicity and superhydrophobicity via an alternating UV irradiation and heating process leads to a switching between "water-absorbing" and "size-sieving" effects in water-in-oil emulsion separation. A comparative study for investigating two such effects in emulsion separation is further investigated. The current conceptual insights not only extend superwetting states to multiphase media, but can also deepen the understanding of the relationship between macroscopic extreme wetting behaviors and surface chemistry.
Collapse
Affiliation(s)
- Yihan Sun
- State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou, 730000, P. R. China
- University of Chinese Academy of Sciences, Beijing, 100049, P. R. China
| | - Zhiguang Guo
- State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou, 730000, P. R. China
- Ministry of Education Key Laboratory for the Green Preparation and Application of Functional Materials, Hubei University, Wuhan, 430062, P. R. China
| |
Collapse
|
15
|
Chen K, Zhou J, Che X, Zhao R, Gao Q. One-step synthesis of core shell cellulose-silica/n-octadecane microcapsules and their application in waterborne self-healing multiple protective fabric coatings. J Colloid Interface Sci 2020; 566:401-410. [PMID: 32018180 DOI: 10.1016/j.jcis.2020.01.106] [Citation(s) in RCA: 34] [Impact Index Per Article: 8.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/17/2019] [Revised: 01/24/2020] [Accepted: 01/28/2020] [Indexed: 11/17/2022]
Abstract
Exploiting water-based fabric coatings outfitted with multiple protections (e.g., waterproofness, ultraviolet (UV) resistance and thermal insulation) are urgently demanded. Nevertheless, achieving the multifunction and durability poses the major challenge. In the present study, novel multifunctional cellulose/silica hybrid microcapsules were developed by one-step emulsion-solvent diffusion; these microcapsules were well dispersed into waterborne silicone resins to form waterborne multiple protective fabric coatings. Since the encapsulated phase change materials were in the core of capsules, and the hydrophobic coupling reagent and UV absorber were grafted onto the silicas in the shell of capsules, these fabric coatings exhibited high superhydrophobicity, UV protection and thermal insulation. Moreover, because hydrophobic coupling reagent and UV absorber in the shell-cellulose of capsules exhibited easy mobility, the fabric coatings displayed self-repairability of superhydrophobicity and UV protection even after being damaged chemically or mechanically. The fabric coating presented in this study could have a range of applications, covering special protective fabric, high-altitude garments as well as self-cleaning materials.
Collapse
Affiliation(s)
- Kunlin Chen
- Key Laboratory of Eco-Textile, Ministry of Education, School of Textiles and Clothing, Jiangnan University, Wuxi 214122, China.
| | - Jianlin Zhou
- Key Laboratory of Eco-Textile, Ministry of Education, School of Textiles and Clothing, Jiangnan University, Wuxi 214122, China
| | - Xiaogang Che
- Key Laboratory of Eco-Textile, Ministry of Education, School of Textiles and Clothing, Jiangnan University, Wuxi 214122, China
| | - Ruoyi Zhao
- Key Laboratory of Eco-Textile, Ministry of Education, School of Textiles and Clothing, Jiangnan University, Wuxi 214122, China
| | - Qiang Gao
- School of Chemistry and Chemical Engineering, Yangzhou University, Yangzhou 225002, China.
| |
Collapse
|
16
|
Science and Engineering of Superhydrophobic Surfaces: Review of Corrosion Resistance, Chemical and Mechanical Stability. ARAB J CHEM 2020. [DOI: 10.1016/j.arabjc.2018.01.013] [Citation(s) in RCA: 205] [Impact Index Per Article: 51.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/07/2023] Open
|
17
|
Yamauchi Y, Tenjimbayashi M, Samitsu S, Naito M. Durable and Flexible Superhydrophobic Materials: Abrasion/Scratching/Slicing/Droplet Impacting/Bending/Twisting-Tolerant Composite with Porcupinefish-Like Structure. ACS APPLIED MATERIALS & INTERFACES 2019; 11:32381-32389. [PMID: 31429550 DOI: 10.1021/acsami.9b09524] [Citation(s) in RCA: 36] [Impact Index Per Article: 7.2] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/21/2023]
Abstract
Superhydrophobic materials with micro/nanotextured surface have attracted tremendous attention owing to their potential applications such as self-cleaning, antifouling, anti-icing, and corrosion prevention. Such a micro/nanotextured surface is a key for high water repellency. However, such a texture is fragile and readily damaged when the material is deformed, scratched, or sliced off. Thus, it is challenging to develop superhydrophobic materials that can sustain high water repellency after experiencing such a mechanical deformation and damage. Here we report abrasion/scratching/slicing/droplet impacting/bending/twisting-tolerant superhydrophobic flexible materials with porcupinefish-like structure by using a composite of micrometer-scale tetrapod-shaped ZnO and poly(dimethylsiloxane). Owing to the geometry of the tetrapod and elasticity of poly(dimethylsiloxane), the composite material exhibits stable water repellency after 1000 abrasion and 1000 bending cycles, or even after their surfaces were sliced off many times. The material maintains superhydrophobicity even under a mechanically deformed state such as bending and twisting. The materials can be painted on a variety of substrates and molded into desired shapes and used in a myriad of applications that require superhydrophobicity.
Collapse
Affiliation(s)
- Yoshihiro Yamauchi
- International Center for Young Scientists , National Institute for Materials Science , 1-2-1 Sengen , Tsukuba , Ibaraki 305-0047 , Japan
| | - Mizuki Tenjimbayashi
- Data-driven Polymer Design Group , National Institute for Materials Science , 1-2-1 Sengen , Tsukuba , Ibaraki 305-0047 , Japan
| | - Sadaki Samitsu
- Data-driven Polymer Design Group , National Institute for Materials Science , 1-2-1 Sengen , Tsukuba , Ibaraki 305-0047 , Japan
| | - Masanobu Naito
- Data-driven Polymer Design Group , National Institute for Materials Science , 1-2-1 Sengen , Tsukuba , Ibaraki 305-0047 , Japan
| |
Collapse
|
18
|
Ezazi M, Shrestha B, Klein N, Lee DH, Seo S, Kwon G. Self-Healable Superomniphobic Surfaces for Corrosion Protection. ACS APPLIED MATERIALS & INTERFACES 2019; 11:30240-30246. [PMID: 31339304 DOI: 10.1021/acsami.9b08855] [Citation(s) in RCA: 10] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
Corrosion-protective surfaces are of the utmost relevance to ensure long-term stability and reliability of metals and alloys by limiting their interactions with corrosive species, such as water and ions. However, their practical applications are often limited either by the inability to repel low surface tension liquids such as oils and alcohols or by poor mechanical durability. Here, a superomniphobic surface is reported that can display very high contact angles for both high and low surface tension liquids as well as for concentrated acids and bases. Such extreme repellency allowed for approximately 20% of the corrosion rate compared to the conventional superhydrophobic corrosion protective coatings. Furthermore, the superomniphobic surface can autonomously repair mechanical damage at an elevated temperature (60 °C) within a short period of time (60 s), and the surface can restore its intrinsic corrosion protection performance. Such superomniphobic surfaces thus offer a wide range of potential applications, including pipelines, with sustainable corrosion protection and rust inhibitors for steel in reinforced concrete.
Collapse
Affiliation(s)
- Mohammadamin Ezazi
- Department of Mechanical Engineering , University of Kansas , Lawrence , Kansas 66045 , United States
| | - Bishwash Shrestha
- Department of Mechanical Engineering , University of Kansas , Lawrence , Kansas 66045 , United States
| | - Nathan Klein
- Department of Mechanical Engineering , University of Kansas , Lawrence , Kansas 66045 , United States
| | - Duck Hyun Lee
- Green Materials and Processes Group , Korea Institute of Industrial Technology , Ulsan 44413 , Republic of Korea
| | - Sungbaek Seo
- Department of Biomaterials Science , Pusan National University , Miryang 50463 , Republic of Korea
| | - Gibum Kwon
- Department of Mechanical Engineering , University of Kansas , Lawrence , Kansas 66045 , United States
| |
Collapse
|
19
|
Surface topographies of biomimetic superamphiphobic materials: design criteria, fabrication and performance. Adv Colloid Interface Sci 2019; 269:87-121. [PMID: 31059923 DOI: 10.1016/j.cis.2019.04.007] [Citation(s) in RCA: 24] [Impact Index Per Article: 4.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/20/2019] [Revised: 03/15/2019] [Accepted: 04/24/2019] [Indexed: 12/26/2022]
Abstract
Superamphiphobicity is a wetting phenomenon that not only water but also oils or organic solvents with low surface tension exhibit large contact angles above 150° along with low contact angle hysteresis on solid surface. It is well known that both chemical constituent and surface roughness have impacts on the wettability of solid surface. Herein, several fundamental wetting states and design criteria for re-entrant structures are introduced first. Then, various chemical modification materials endowing solid substrates low surface energy are summarized subsequently. Furthermore, roughening processes conferring hierarchical or re-entrant topographic structures on surfaces are classified based on different types of topographies abstracted from the natural oil-repellent creatures (mushroom-like structures) as well as bio-inspired superamphiphobic surfaces (i.e., randomly distributed nanostructures, regularly patterned microstructures and other complex hierarchical structures). Significantly, the impalement pressure and formulated rules of various re-entrant profiles are recommended in detail. At the same time, fabrication, outstanding performances such as mechanical durability, chemical stability are also mentioned according to different types of morphologies. Beyond that, current fabrication obstacles and future prospects are proposed simultaneously in the end.
Collapse
|
20
|
Hupfer ML, Herrmann‐Westendorf F, Kaufmann M, Weiß D, Beckert R, Dietzek B, Presselt M. Autonomous Supramolecular Interface Self‐Healing Monitored by Restoration of UV/Vis Absorption Spectra of Self‐Assembled Thiazole Layers. Chemistry 2019; 25:8630-8634. [DOI: 10.1002/chem.201901549] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/03/2019] [Indexed: 11/10/2022]
Affiliation(s)
- Maximilian L. Hupfer
- Institute of Physical ChemistryFriedrich Schiller University Jena Helmholtzweg 4 07743 Jena Germany
- Leibniz Institute of Photonic Technology (IPHT) Albert-Einstein-Str. 9 07745 Jena Germany
| | - Felix Herrmann‐Westendorf
- Institute of Physical ChemistryFriedrich Schiller University Jena Helmholtzweg 4 07743 Jena Germany
- Leibniz Institute of Photonic Technology (IPHT) Albert-Einstein-Str. 9 07745 Jena Germany
| | - Martin Kaufmann
- Institute of Physical ChemistryFriedrich Schiller University Jena Helmholtzweg 4 07743 Jena Germany
- Institute of Organic and Macromolecular ChemistryFriedrich Schiller University Jena Humboldstraße 10 07743 Jena Germany
| | - Dieter Weiß
- Institute of Organic and Macromolecular ChemistryFriedrich Schiller University Jena Humboldstraße 10 07743 Jena Germany
| | - Rainer Beckert
- Institute of Organic and Macromolecular ChemistryFriedrich Schiller University Jena Humboldstraße 10 07743 Jena Germany
| | - Benjamin Dietzek
- Institute of Physical ChemistryFriedrich Schiller University Jena Helmholtzweg 4 07743 Jena Germany
- Leibniz Institute of Photonic Technology (IPHT) Albert-Einstein-Str. 9 07745 Jena Germany
| | - Martin Presselt
- Institute of Physical ChemistryFriedrich Schiller University Jena Helmholtzweg 4 07743 Jena Germany
- Leibniz Institute of Photonic Technology (IPHT) Albert-Einstein-Str. 9 07745 Jena Germany
- Center for Energy and Environmental Chemistry Jena (CEEC Jena)Friedrich Schiller University Jena Philosophenweg 7a 07743 Jena Germany
- sciclus GmbH & Co. KG Moritz-von-Rohr-Str. 1a 07745 Jena Germany
| |
Collapse
|
21
|
Speck O, Speck T. An Overview of Bioinspired and Biomimetic Self-Repairing Materials. Biomimetics (Basel) 2019; 4:E26. [PMID: 31105211 PMCID: PMC6477613 DOI: 10.3390/biomimetics4010026] [Citation(s) in RCA: 58] [Impact Index Per Article: 11.6] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/10/2018] [Revised: 02/25/2019] [Accepted: 02/26/2019] [Indexed: 01/08/2023] Open
Abstract
During the 3.8 billion years of biological evolution, a multitude of functional principles has been developed in all kingdoms of life enabling the sealing and healing of diverse types of damage. Inspired by this treasure trove, biologists and engineers have become increasingly interested in learning from biological insights for the development of self-repairing materials. In this review, particular attention is paid to the systematic transfer of knowledge from wound reactions in biological role models to technical applications with self-repair function. This knowledge transfer includes bioinspiration in terms of the conscious implementation of an idea from nature or biomimetics in the form of a systematic transfer of underlying functional principles found in selected biological role models. The current overview presents a selection of breakthroughs regarding bioinspired or biomimetic self-repairing materials, including the initial basic publications and the recent publications of the last eight years. Each reviewed publication is presented with reference to three key criteria: (i) self-repair mechanisms in plants or animals as role models; (ii) knowledge transfer from living nature to technology; and (iii) bioinspired or biomimetic materials with self-repair function. Finally, damage control is discussed with a focus on damage prevention and damage management.
Collapse
Affiliation(s)
- Olga Speck
- Plant Biomechanics Group and Botanic Garden, University of Freiburg, Schänzlestr. 1, 79104 Freiburg, Germany.
- Cluster of Excellence livMatS @ FIT-Freiburg Center for Interactive Materials and Bioinspired Technologies, University of Freiburg, Georges-Köhler-Allee 105, D-79110 Freiburg, Germany.
| | - Thomas Speck
- Plant Biomechanics Group and Botanic Garden, University of Freiburg, Schänzlestr. 1, 79104 Freiburg, Germany.
- Cluster of Excellence livMatS @ FIT-Freiburg Center for Interactive Materials and Bioinspired Technologies, University of Freiburg, Georges-Köhler-Allee 105, D-79110 Freiburg, Germany.
| |
Collapse
|
22
|
Wang H, Wang P, Feng Y, Liu J, Wang J, Hu M, Wei J, Huang Y. Recent Advances on Self‐Healing Materials and Batteries. ChemElectroChem 2019. [DOI: 10.1002/celc.201801612] [Citation(s) in RCA: 32] [Impact Index Per Article: 6.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/12/2022]
Affiliation(s)
- Hua Wang
- Centre of Flexible and Printable ElectronicsHarbin Institute of Technology (Shenzhen) Shenzhen 518055 China
| | - Panpan Wang
- Centre of Flexible and Printable ElectronicsHarbin Institute of Technology (Shenzhen) Shenzhen 518055 China
| | - Yuping Feng
- Centre of Flexible and Printable ElectronicsHarbin Institute of Technology (Shenzhen) Shenzhen 518055 China
| | - Jie Liu
- Centre of Flexible and Printable ElectronicsHarbin Institute of Technology (Shenzhen) Shenzhen 518055 China
| | - Jiaqi Wang
- Centre of Flexible and Printable ElectronicsHarbin Institute of Technology (Shenzhen) Shenzhen 518055 China
| | - Mengmeng Hu
- Centre of Flexible and Printable ElectronicsHarbin Institute of Technology (Shenzhen) Shenzhen 518055 China
| | - Jun Wei
- Singapore Institute of Manufacturing Technology Singapore 310027 Singapore
| | - Yan Huang
- Centre of Flexible and Printable ElectronicsHarbin Institute of Technology (Shenzhen) Shenzhen 518055 China
- State Key Laboratory of Advanced Welding and JoiningHarbin Institute of Technology (Shenzhen) Shenzhen 518055 China
| |
Collapse
|
23
|
Ren Z, Wen G, Guo Z. Biomimetic high-intensity superhydrophobic metal rubber with anti-corrosion property for industrial oil–water separation. NEW J CHEM 2019. [DOI: 10.1039/c8nj04907f] [Citation(s) in RCA: 15] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/22/2023]
Abstract
In this work, a superhydrophobic metal rubber with excellent water repellency, mechanical durability, corrosion resistance and oil/water separation properties was prepared by a facile and scale-up chemical etching method and a straightforward modification.
Collapse
Affiliation(s)
- Zhiying Ren
- College of Mechanical Engineering and Automation
- Fuzhou University
- Fuzhou 350116
- People's Republic of China
- State Key Laboratory of Solid Lubrication
| | - Gang Wen
- Hubei Collaborative Innovation Centre for Advanced Organic Chemical Materials and Ministry of Education Key Laboratory for the Green Preparation and Application of Functional Materials
- Hubei University
- Wuhan 430062
- People's Republic of China
- State Key Laboratory of Solid Lubrication
| | - Zhiguang Guo
- Hubei Collaborative Innovation Centre for Advanced Organic Chemical Materials and Ministry of Education Key Laboratory for the Green Preparation and Application of Functional Materials
- Hubei University
- Wuhan 430062
- People's Republic of China
- State Key Laboratory of Solid Lubrication
| |
Collapse
|
24
|
Banerjee S, Tawade BV, Améduri B. Functional fluorinated polymer materials and preliminary self-healing behavior. Polym Chem 2019. [DOI: 10.1039/c9py00122k] [Citation(s) in RCA: 15] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/07/2023]
Abstract
Effective use of Diels–Alder chemistry led to the development of thermally amendable and self-healing polymeric materials based on a copolymer of cyclopenta-1,3-dien-1-ylmethyl 2-(trifluoromethyl)acrylate (MAF-Furan) and 2,2,2-trifluoroethyl α-fluoroacrylate (FATRIFE).
Collapse
Affiliation(s)
- Sanjib Banerjee
- Department of Chemistry
- Indian Institute of Technology Bhilai
- Raipur 492015
- India
- ICGM
| | | | - Bruno Améduri
- ICGM
- University of Montpellier
- CNRS
- ENSCM
- 34095 Montpellier Cedex
| |
Collapse
|
25
|
Zhang D, Cheng Z, Liu Y. Smart Wetting Control on Shape Memory Polymer Surfaces. Chemistry 2018; 25:3979-3992. [DOI: 10.1002/chem.201804192] [Citation(s) in RCA: 32] [Impact Index Per Article: 5.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/16/2018] [Indexed: 01/10/2023]
Affiliation(s)
- Dongjie Zhang
- MIIT Key Laboratory of Critical Materials Technology for New Energy, Conversion and StorageSchool of Chemistry and Chemical EngineeringHarbin Institute of Technology Harbin 150001 P.R. China
| | - Zhongjun Cheng
- Academy of Fundamental and Interdisciplinary SciencesHarbin Institute of Technology Harbin 150090 P.R. China
| | - Yuyan Liu
- MIIT Key Laboratory of Critical Materials Technology for New Energy, Conversion and StorageSchool of Chemistry and Chemical EngineeringHarbin Institute of Technology Harbin 150001 P.R. China
| |
Collapse
|
26
|
Mutlu H, Ceper EB, Li X, Yang J, Dong W, Ozmen MM, Theato P. Sulfur Chemistry in Polymer and Materials Science. Macromol Rapid Commun 2018; 40:e1800650. [DOI: 10.1002/marc.201800650] [Citation(s) in RCA: 137] [Impact Index Per Article: 22.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/31/2018] [Revised: 10/17/2018] [Indexed: 12/22/2022]
Affiliation(s)
- Hatice Mutlu
- Institute for Biological Interfaces III; Karlsruhe Institute of Technology; Herrmann-von-Helmholtz-Platz 1 D-76344 Eggenstein-Leopoldshafen Germany
| | - Ezgi Berfin Ceper
- Department of Bioengineering; Yildiz Technical University; Esenler 34220 Istanbul Turkey
| | - Xiaohui Li
- Institute for Chemical Technology and Polymer Chemistry; Karlsruhe Institute of Technology (KIT); Engesser Str. 18 D-76131 Karlsruhe Germany
| | - Jingmei Yang
- Institute for Chemical Technology and Polymer Chemistry; Karlsruhe Institute of Technology (KIT); Engesser Str. 18 D-76131 Karlsruhe Germany
- Institute of Fundamental Science and Frontiers; University of Electronic Science and Technology of China; Chengdu 610054 China
| | - Wenyuan Dong
- Institute for Chemical Technology and Polymer Chemistry; Karlsruhe Institute of Technology (KIT); Engesser Str. 18 D-76131 Karlsruhe Germany
| | - Mehmet Murat Ozmen
- Department of Bioengineering; Yildiz Technical University; Esenler 34220 Istanbul Turkey
| | - Patrick Theato
- Institute for Biological Interfaces III; Karlsruhe Institute of Technology; Herrmann-von-Helmholtz-Platz 1 D-76344 Eggenstein-Leopoldshafen Germany
- Institute for Chemical Technology and Polymer Chemistry; Karlsruhe Institute of Technology (KIT); Engesser Str. 18 D-76131 Karlsruhe Germany
| |
Collapse
|
27
|
A facile method to mussel-inspired superhydrophobic thiol-textiles@polydopamine for oil/water separation. Colloids Surf A Physicochem Eng Asp 2018. [DOI: 10.1016/j.colsurfa.2018.06.059] [Citation(s) in RCA: 28] [Impact Index Per Article: 4.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/20/2022]
|
28
|
Shim J, Seo D, Oh S, Lee J, Nam Y. Condensation Heat-Transfer Performance of Thermally Stable Superhydrophobic Cerium-Oxide Surfaces. ACS APPLIED MATERIALS & INTERFACES 2018; 10:31765-31776. [PMID: 30136846 DOI: 10.1021/acsami.8b09597] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/08/2023]
Abstract
We introduce a thin (<200 nm) superhydrophobic cerium-oxide surface formed by a one-step wet chemical process to enhance the condensation heat-transfer performance with improved thermal stability compared to silane-treated surfaces. The developed cerium-oxide surface showed a superhydrophobic characteristic with a low (<5°) contact angle hysteresis because of the unique surface morphology and hydrophobicity of cerium oxide. The surface was successfully incorporated to popular engineering materials including copper, aluminum, and steel. Thermal stability of the surfaces was investigated by exposing them to hot (∼100 °C) steam conditions for 12 h. The introduced ceria surfaces could maintain active dropwise condensation after the thermal stability test, whereas silane-treated surfaces completely lost their hydrophobicity. The heat-transfer coefficient was calculated using the thermal network model incorporating the droplet size distribution and morphology obtained from the microscopic measurement. The analysis shows that the suggested cerium-oxide surfaces can provide approximately 2 times and 5 times higher heat-transfer coefficient before and after the thermal stability test, respectively, mainly because of the decrease in the thermal conduction resistance across droplets. The results indicate that the introduced nanostructured cerium-oxide surface is a promising condenser coating to enhance the droplet mobility and the resulting condensation heat-transfer performance for various thermal and environmental applications, especially those being exposed to hot steam conditions.
Collapse
Affiliation(s)
- Jaehwan Shim
- Department of Mechanical Engineering , Kyung Hee University , Yongin 17104 , Korea
| | - Donghyun Seo
- Department of Mechanical Engineering , Kyung Hee University , Yongin 17104 , Korea
| | - Seungtae Oh
- Department of Mechanical Engineering , Kyung Hee University , Yongin 17104 , Korea
| | - Jinki Lee
- Theomochemical Energy System R&D Group , Korea Institute of Industrial Technology , Cheonan 31056 , Korea
| | - Youngsuk Nam
- Department of Mechanical Engineering , Kyung Hee University , Yongin 17104 , Korea
| |
Collapse
|
29
|
Yu X, Yang P, Zhang Z, Wang L, Liu L, Wang Y. Self-healing polyurethane nanocomposite films with recoverable surface hydrophobicity. J Appl Polym Sci 2018. [DOI: 10.1002/app.46421] [Citation(s) in RCA: 16] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/19/2022]
Affiliation(s)
- Xi Yu
- School of Chemistry and Pharmaceutical Engineering; Qilu University of Technology (Shandong Academy of Sciences); Jinan 250353 People's Republic of China
| | - Pengfei Yang
- School of Chemistry and Pharmaceutical Engineering; Qilu University of Technology (Shandong Academy of Sciences); Jinan 250353 People's Republic of China
| | - Zhiliang Zhang
- School of Chemistry and Pharmaceutical Engineering; Qilu University of Technology (Shandong Academy of Sciences); Jinan 250353 People's Republic of China
| | - Liang Wang
- College of Chemistry and Pharmaceutical Sciences; Qingdao Agricultural University; Qingdao 266109 China
| | - Lian Liu
- School of Chemistry and Pharmaceutical Engineering; Qilu University of Technology (Shandong Academy of Sciences); Jinan 250353 People's Republic of China
| | - Yongqing Wang
- School of Chemistry and Pharmaceutical Engineering; Qilu University of Technology (Shandong Academy of Sciences); Jinan 250353 People's Republic of China
| |
Collapse
|
30
|
Xu Y, Yang H, Zang D, Zhou Y, Liu F, Huang X, Chang JS, Wang C, Ho SH. Preparation of a new superhydrophobic/superoleophilic corn straw fiber used as an oil absorbent for selective absorption of oil from water. BIORESOUR BIOPROCESS 2018. [DOI: 10.1186/s40643-018-0194-8] [Citation(s) in RCA: 12] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/10/2022] Open
|
31
|
Mechanical stability, corrosion resistance of superhydrophobic steel and repairable durability of its slippery surface. J Colloid Interface Sci 2018; 512:239-248. [DOI: 10.1016/j.jcis.2017.10.061] [Citation(s) in RCA: 69] [Impact Index Per Article: 11.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/31/2017] [Revised: 10/15/2017] [Accepted: 10/16/2017] [Indexed: 11/19/2022]
|
32
|
Wang M, Liu Q, Zhang H, Wang C, Wang L, Xiang B, Fan Y, Guo CF, Ruan S. Laser Direct Writing of Tree-Shaped Hierarchical Cones on a Superhydrophobic Film for High-Efficiency Water Collection. ACS APPLIED MATERIALS & INTERFACES 2017; 9:29248-29254. [PMID: 28805364 DOI: 10.1021/acsami.7b08116] [Citation(s) in RCA: 31] [Impact Index Per Article: 4.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/07/2023]
Abstract
Directional water collection has stimulated a great deal of interest because of its potential applications in the field of microfluidics, liquid transportation, fog harvesting, and so forth. There have been some bio or bioinspired structures for directional water collection, from one-dimensional spider silk to two-dimensional star-like patterns to three-dimensional Nepenthes alata. Here we present a simple way for the accurate design and highly controllable driving of tiny droplets: by laser direct writing of hierarchical patterns with modified wettability and desired geometry on a superhydrophobic film, the patterned film can precisely and directionally drive tiny water droplets and dramatically improve the efficiency of water collection with a factor of ∼36 compared with the original superhydrophobic film. Such a patterned film might be an ideal platform for water collection from humid air and for planar microfluidics without tunnels.
Collapse
Affiliation(s)
| | - Qian Liu
- National Center for Nanoscience and Technology , Beijing 100190, People's Republic of China
| | - Haoran Zhang
- National Center for Nanoscience and Technology , Beijing 100190, People's Republic of China
| | - Chuang Wang
- National Center for Nanoscience and Technology , Beijing 100190, People's Republic of China
| | - Lei Wang
- National Center for Nanoscience and Technology , Beijing 100190, People's Republic of China
| | | | - Yongtao Fan
- Shanghai Institute of Optics and Fine Mechanics , Shanghai 201800, People's Republic of China
| | - Chuan Fei Guo
- Department of Materials Science and Engineering, Southern University of Science and Technology , Shenzhen 518055, People's Republic of China
| | | |
Collapse
|
33
|
Si Y, Yang F, Guo Z. Bio-inspired one-pot route to prepare robust and repairable micro-nanoscale superhydrophobic coatings. J Colloid Interface Sci 2017; 498:182-193. [DOI: 10.1016/j.jcis.2017.03.063] [Citation(s) in RCA: 25] [Impact Index Per Article: 3.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/10/2017] [Revised: 03/14/2017] [Accepted: 03/14/2017] [Indexed: 10/20/2022]
|
34
|
Guo F, Wen Q, Peng Y, Guo Z. Multifunctional hollow superhydrophobic SiO 2 microspheres with robust and self-cleaning and separation of oil/water emulsions properties. J Colloid Interface Sci 2017; 494:54-63. [PMID: 28135628 DOI: 10.1016/j.jcis.2017.01.070] [Citation(s) in RCA: 65] [Impact Index Per Article: 9.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/17/2016] [Revised: 01/20/2017] [Accepted: 01/20/2017] [Indexed: 11/29/2022]
Abstract
Superhydrophobic materials have drawn great attention due to its' remarkable non-wetting properties and applications in many fields. In this paper, we synthesize a hollow superhydrophobic SiO2 powder by typical template method and self-assembly functionalization. Robustness of many superhydrophobic surfaces has become the development bottleneck for industrial applications. Aiming at this problem, the adhesive epoxy resin is specially taken to use as the binding layer between superhydrophobic SiO2 powder and substrates to create robust superhydrophobic coating. The mechanical durability of the obtained superhydrophobic coating is evaluated by a cyclic sandpaper abrasion. Also, the chemical stability of this superhydrophobic coating is assessed by exposuring it to different pH conditions and UV irradiation, respectively. Significantly, because of the special structure and superhydrophobicity/superoleophilicity of the hollow microspheres, these hollow superhydrophobic SiO2 powders manifest great oil-adsorbing capacity, which thus can be used to separate oil/water mixtures and remove oil from oil-in-water emulsions.
Collapse
Affiliation(s)
- Fei Guo
- Hubei Collaborative Innovation Centre for Advanced Organic Chemical Materials, Ministry of Education Key Laboratory for the Green Preparation and Application of Functional Materials, Hubei University, Wuhan 430062, People's Republic of China; State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000, People's Republic of China
| | - Qiuying Wen
- Hubei Collaborative Innovation Centre for Advanced Organic Chemical Materials, Ministry of Education Key Laboratory for the Green Preparation and Application of Functional Materials, Hubei University, Wuhan 430062, People's Republic of China; State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000, People's Republic of China
| | - Yubing Peng
- Hubei Collaborative Innovation Centre for Advanced Organic Chemical Materials, Ministry of Education Key Laboratory for the Green Preparation and Application of Functional Materials, Hubei University, Wuhan 430062, People's Republic of China; State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000, People's Republic of China
| | - Zhiguang Guo
- Hubei Collaborative Innovation Centre for Advanced Organic Chemical Materials, Ministry of Education Key Laboratory for the Green Preparation and Application of Functional Materials, Hubei University, Wuhan 430062, People's Republic of China; State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000, People's Republic of China.
| |
Collapse
|
35
|
Sahoo BN, Nanda S, Kozinski JA, Mitra SK. PDMS/camphor soot composite coating: towards a self-healing and a self-cleaning superhydrophobic surface. RSC Adv 2017. [DOI: 10.1039/c6ra28581c] [Citation(s) in RCA: 33] [Impact Index Per Article: 4.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022] Open
Abstract
A novel self-cleaning polymer composite with self-healing ability to self-repair after chemical and mechanical damage using readily available materials like polydimethylsiloxane (PDMS) and camphor soot particles is developed.
Collapse
Affiliation(s)
- Bichitra N. Sahoo
- Micro & Nano-scale Transport Laboratory
- Lassonde School of Engineering
- York University
- Toronto
- Canada
| | - Sonil Nanda
- Department of Earth and Space Science and Engineering
- Lassonde School of Engineering
- York University
- Toronto
- Canada
| | - Janusz A. Kozinski
- Department of Earth and Space Science and Engineering
- Lassonde School of Engineering
- York University
- Toronto
- Canada
| | - Sushanta K. Mitra
- Micro & Nano-scale Transport Laboratory
- Lassonde School of Engineering
- York University
- Toronto
- Canada
| |
Collapse
|
36
|
Chen K, Gu K, Qiang S, Wang C. Environmental stimuli-responsive self-repairing waterbased superhydrophobic coatings. RSC Adv 2017. [DOI: 10.1039/c6ra25135h] [Citation(s) in RCA: 38] [Impact Index Per Article: 5.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/07/2023] Open
Abstract
A waterbased self-repairing superhydrophobic coating shows a self-repairing ability after mechanical damage or contamination with organics, and thus long-term outdoor durability.
Collapse
Affiliation(s)
- Kunlin Chen
- Key Laboratory of Eco-Textiles
- Ministry of Education
- School of Textiles and Clothing
- Jiangnan University
- Wuxi 214122
| | - Kun Gu
- Key Laboratory of Eco-Textiles
- Ministry of Education
- School of Textiles and Clothing
- Jiangnan University
- Wuxi 214122
| | - Siyu Qiang
- Key Laboratory of Eco-Textiles
- Ministry of Education
- School of Textiles and Clothing
- Jiangnan University
- Wuxi 214122
| | - Chaoxia Wang
- Key Laboratory of Eco-Textiles
- Ministry of Education
- School of Textiles and Clothing
- Jiangnan University
- Wuxi 214122
| |
Collapse
|
37
|
Wang H, Zhou H, Liu S, Shao H, Fu S, Rutledge GC, Lin T. Durable, self-healing, superhydrophobic fabrics from fluorine-free, waterborne, polydopamine/alkyl silane coatings. RSC Adv 2017. [DOI: 10.1039/c7ra04863g] [Citation(s) in RCA: 46] [Impact Index Per Article: 6.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022] Open
Abstract
Superhydrophobic fabrics prepared from a polydopamine coating show high water repellency, good durability and self-healing property.
Collapse
Affiliation(s)
- Hongxia Wang
- Institute for Frontier Materials
- Deakin University
- Geelong
- Australia
| | - Hua Zhou
- Institute for Frontier Materials
- Deakin University
- Geelong
- Australia
| | - Shuai Liu
- School of Mechanical and Electric Engineering
- Soochow University
- China
| | - Hao Shao
- Institute for Frontier Materials
- Deakin University
- Geelong
- Australia
| | - Sida Fu
- Institute for Frontier Materials
- Deakin University
- Geelong
- Australia
| | - Gregory C. Rutledge
- Department of Chemical Engineering
- Massachusetts Institute of Technology
- Cambridge
- USA
| | - Tong Lin
- Institute for Frontier Materials
- Deakin University
- Geelong
- Australia
| |
Collapse
|
38
|
Bai X, Xue CH, Jia ST. Surfaces with Sustainable Superhydrophobicity upon Mechanical Abrasion. ACS APPLIED MATERIALS & INTERFACES 2016; 8:28171-28179. [PMID: 27668829 DOI: 10.1021/acsami.6b08672] [Citation(s) in RCA: 22] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/06/2023]
Abstract
Surfaces with sustainable superhydrophobicity have drawn much attention in recent years for improved durability in practical applications. In this study, hollow mesoporous silica nanoparticles (HMSNs) were prepared and used as reservoirs to load dodecyltrimethoxysilane (DDTMS). Then superhydrophobic surfaces were fabricated by spray coating HMSNs with DDTMS as particle stacking structure and polydimethylsiloxane (PDMS) as hydrophobic interconnection. The mechanical durability of the obtained superhydrophobic surface was evaluated by a cyclic sand abrasion. It was found that once the surface was mechanically damaged, new roughening structures made of the cavity of the HMSNs would expose and maintain suitable hierarchical roughness surrounded by PDMS and DDTMS, favoring sustainable superhydrphobicity of the coating. The surfaces could sustain superhydrophobicity even after 1000 cycles of sand abrasion. This facile strategy may pave the way to the development of robust superhydrophobic surfaces in practical applications.
Collapse
Affiliation(s)
- Xue Bai
- College of Resource and Environment, Shaanxi University of Science and Technology , Xi'an 710021, China
| | - Chao-Hua Xue
- College of Resource and Environment, Shaanxi University of Science and Technology , Xi'an 710021, China
- College of Bioresources Chemical and Materials Engineering, Shaanxi University of Science and Technology , Xi'an 710021, China
| | - Shun-Tian Jia
- College of Resource and Environment, Shaanxi University of Science and Technology , Xi'an 710021, China
| |
Collapse
|
39
|
Zhao H, Xu J, Jing G, Prieto-López LO, Deng X, Cui J. Controlling the Localization of Liquid Droplets in Polymer Matrices by Evaporative Lithography. Angew Chem Int Ed Engl 2016. [DOI: 10.1002/ange.201604868] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/14/2022]
Affiliation(s)
- Huaixia Zhao
- Institute of Fundamental and Frontier Sciences; University of Electronic Science and Technology of China; No. 4, Section 2, North Jianshe Road Chengdu Sichuan China
- INM-Leibniz Institute for New Materials; Campus D2 2 66123 Saarbrücken Germany
| | - Jiajia Xu
- INM-Leibniz Institute for New Materials; Campus D2 2 66123 Saarbrücken Germany
| | - Guangyin Jing
- National Key Laboratory and Incubation Base of Photoelectric Technology and Functional Materials and School of Physics; Northwest University; 710069 China
- PMMH, CNRS-UMR 7636, ESPCI-ParisTech; 10 Rue Vauquelin, 75005 Paris France
| | | | - Xu Deng
- Institute of Fundamental and Frontier Sciences; University of Electronic Science and Technology of China; No. 4, Section 2, North Jianshe Road Chengdu Sichuan China
| | - Jiaxi Cui
- Institute of Fundamental and Frontier Sciences; University of Electronic Science and Technology of China; No. 4, Section 2, North Jianshe Road Chengdu Sichuan China
- INM-Leibniz Institute for New Materials; Campus D2 2 66123 Saarbrücken Germany
| |
Collapse
|
40
|
Zhao H, Xu J, Jing G, Prieto-López LO, Deng X, Cui J. Controlling the Localization of Liquid Droplets in Polymer Matrices by Evaporative Lithography. Angew Chem Int Ed Engl 2016; 55:10681-5. [DOI: 10.1002/anie.201604868] [Citation(s) in RCA: 32] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/18/2016] [Revised: 06/16/2016] [Indexed: 11/11/2022]
Affiliation(s)
- Huaixia Zhao
- Institute of Fundamental and Frontier Sciences; University of Electronic Science and Technology of China; No. 4, Section 2, North Jianshe Road Chengdu Sichuan China
- INM-Leibniz Institute for New Materials; Campus D2 2 66123 Saarbrücken Germany
| | - Jiajia Xu
- INM-Leibniz Institute for New Materials; Campus D2 2 66123 Saarbrücken Germany
| | - Guangyin Jing
- National Key Laboratory and Incubation Base of Photoelectric Technology and Functional Materials and School of Physics; Northwest University; 710069 China
- PMMH, CNRS-UMR 7636, ESPCI-ParisTech; 10 Rue Vauquelin, 75005 Paris France
| | | | - Xu Deng
- Institute of Fundamental and Frontier Sciences; University of Electronic Science and Technology of China; No. 4, Section 2, North Jianshe Road Chengdu Sichuan China
| | - Jiaxi Cui
- Institute of Fundamental and Frontier Sciences; University of Electronic Science and Technology of China; No. 4, Section 2, North Jianshe Road Chengdu Sichuan China
- INM-Leibniz Institute for New Materials; Campus D2 2 66123 Saarbrücken Germany
| |
Collapse
|
41
|
Chen B, Qiu J, Sakai E, Kanazawa N, Liang R, Feng H. Robust and Superhydrophobic Surface Modification by a "Paint + Adhesive" Method: Applications in Self-Cleaning after Oil Contamination and Oil-Water Separation. ACS APPLIED MATERIALS & INTERFACES 2016; 8:17659-67. [PMID: 27286474 DOI: 10.1021/acsami.6b04108] [Citation(s) in RCA: 65] [Impact Index Per Article: 8.1] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/24/2023]
Abstract
Conventional superhydrophobic surfaces have always depended on expensive, sophisticated, and fragile roughness structures. Therefore, poor robustness has turned into the bottleneck for large-scale industrial applications of the superhydrophobic surfaces. To handle this problem, a superhydrophobic surface with firm robustness urgently needs to be developed. In this work, we created a versatile strategy to fabricate robust, self-cleaning, and superhydrophobic surfaces for both soft and hard substrates. We created an ethanol based suspension of perfluorooctyltriethoxysilane-mdodified calcium carbonate nanoparticles which can be sprayed onto both hard and soft substrates to form superhydrophobic surfaces. For all kinds of substrates, spray adhesive was directly coated onto abluent substrate surfaces to promote the robustness. These superhydrophobic surfaces showed remarkable robustness against knife scratch and sandpaper abrasion, while retaining its superhydrophobicity even after 30 abrasion cycles with sandpaper. What is more, the superhydrophobic surfaces have shown promising potential applications in self-cleaning and oil-water separation. The surfaces retained their self-cleaning property even immersed in oil. In addition to oil-water separation, the water contents in oil after separation of various mixtures were all below 150 ppm, and for toluene even as low as 55 ppm. Furthermore, the as-prepared device for oil-water separation could be cycled 6 times and still retained excellent oil-water separation efficiency.
Collapse
Affiliation(s)
- Baiyi Chen
- Faculty of Systems Science and Technology, Akita Prefectural University , Akita 015-0055, Japan
| | - Jianhui Qiu
- Faculty of Systems Science and Technology, Akita Prefectural University , Akita 015-0055, Japan
| | - Eiichi Sakai
- Faculty of Systems Science and Technology, Akita Prefectural University , Akita 015-0055, Japan
| | - Nobuhiro Kanazawa
- Faculty of Systems Science and Technology, Akita Prefectural University , Akita 015-0055, Japan
| | - Ruilu Liang
- Faculty of Systems Science and Technology, Akita Prefectural University , Akita 015-0055, Japan
| | - Huixia Feng
- College of Petrochemical Technology, Lanzhou University of Technology , Lanzhou 730050, China
| |
Collapse
|
42
|
Xue CH, Bai X, Jia ST. Robust, Self-Healing Superhydrophobic Fabrics Prepared by One-Step Coating of PDMS and Octadecylamine. Sci Rep 2016; 6:27262. [PMID: 27264995 PMCID: PMC4893697 DOI: 10.1038/srep27262] [Citation(s) in RCA: 135] [Impact Index Per Article: 16.9] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/10/2016] [Accepted: 05/17/2016] [Indexed: 12/23/2022] Open
Abstract
A robust, self-healing superhydrophobic poly(ethylene terephthalate) (PET) fabric was fabricated by a convenient solution-dipping method using an easily available material system consisting of polydimethylsiloxane and octadecylamine (ODA). The surface roughness was formed by self-roughening of ODA coating on PET fibers without any lithography steps or adding any nanomaterials. The fabric coating was durable to withstand 120 cycles of laundry and 5000 cycles of abrasion without apparently changing the superhydrophobicity. More interestingly, the fabric can restore its super liquid-repellent property by 72 h at room temperature even after 20000 cycles of abrasion. Meanwhile, after being damaged chemically, the fabric can restore its superhydrophobicity automatically in 12 h at room temperature or by a short-time heating treatment. We envision that this simple but effective coating system may lead to the development of robust protective clothing for various applications.
Collapse
Affiliation(s)
- Chao-Hua Xue
- College of Resource and Environment, Shaanxi University of Science and Technology, Xi’an 710021, China
- Shaanxi Research Institute of Agricultural Products Processing Technology, Shaanxi University of Science and Technology, Xi’ an 710021, China
| | - Xue Bai
- College of Resource and Environment, Shaanxi University of Science and Technology, Xi’an 710021, China
| | - Shun-Tian Jia
- College of Resource and Environment, Shaanxi University of Science and Technology, Xi’an 710021, China
| |
Collapse
|
43
|
Chen K, Wu Y, Zhou S, Wu L. Recent Development of Durable and Self-Healing Surfaces with Special Wettability. Macromol Rapid Commun 2016; 37:463-85. [DOI: 10.1002/marc.201500591] [Citation(s) in RCA: 91] [Impact Index Per Article: 11.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/30/2015] [Revised: 11/24/2015] [Indexed: 11/11/2022]
Affiliation(s)
- Kunlin Chen
- Key Laboratory of Eco-Textiles; Ministry of Education; School of Textiles&Clothing; Jiangnan University; Wuxi 214122 China
| | - Yi Wu
- Department of Materials Science and State Key Laboratory of Molecular Engineering of Polymers; Advanced Coatings Research Center of Ministry of Education of China; Fudan University; Shanghai 200433 China
| | - Shuxue Zhou
- Department of Materials Science and State Key Laboratory of Molecular Engineering of Polymers; Advanced Coatings Research Center of Ministry of Education of China; Fudan University; Shanghai 200433 China
| | - Limin Wu
- Department of Materials Science and State Key Laboratory of Molecular Engineering of Polymers; Advanced Coatings Research Center of Ministry of Education of China; Fudan University; Shanghai 200433 China
| |
Collapse
|
44
|
Liu YP, Liu HF, Feng YG, Liu ZL, Hu HY, Yu B, Zhou F, Xue QJ. A nanotubular coating with both high transparency and healable superhydrophobic self-cleaning properties. RSC Adv 2016. [DOI: 10.1039/c5ra26977f] [Citation(s) in RCA: 15] [Impact Index Per Article: 1.9] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022] Open
Abstract
The article reports a transparent and healable superhydrophobic self-cleaning coating with a nanotubular structure prepared by calcinating silica-coated polyanilinenanofibers.
Collapse
Affiliation(s)
- Yu-Peng Liu
- State Key Laboratory of Solid Lubrication
- Lanzhou Institute of Chemical Physics Chinese Academy of Sciences
- Lanzhou 730000
- P. R. China
| | - Hui-Fen Liu
- Huawei Technologies Co., Ltd
- Shenzhen 518129
- China
| | - Yan-Ge Feng
- State Key Laboratory of Solid Lubrication
- Lanzhou Institute of Chemical Physics Chinese Academy of Sciences
- Lanzhou 730000
- P. R. China
- University of Chinese Academy of Sciences
| | - Zhi-Lu Liu
- State Key Laboratory of Solid Lubrication
- Lanzhou Institute of Chemical Physics Chinese Academy of Sciences
- Lanzhou 730000
- P. R. China
| | - Hai-Yuan Hu
- State Key Laboratory of Solid Lubrication
- Lanzhou Institute of Chemical Physics Chinese Academy of Sciences
- Lanzhou 730000
- P. R. China
| | - Bo Yu
- State Key Laboratory of Solid Lubrication
- Lanzhou Institute of Chemical Physics Chinese Academy of Sciences
- Lanzhou 730000
- P. R. China
| | - Feng Zhou
- State Key Laboratory of Solid Lubrication
- Lanzhou Institute of Chemical Physics Chinese Academy of Sciences
- Lanzhou 730000
- P. R. China
| | - Qun-Ji Xue
- State Key Laboratory of Solid Lubrication
- Lanzhou Institute of Chemical Physics Chinese Academy of Sciences
- Lanzhou 730000
- P. R. China
| |
Collapse
|
45
|
Zhu Y, Yin T, Ren J, Liu C, Fu D, Ge L. Self-healing polyelectrolyte multilayer composite film with microcapsules. RSC Adv 2016. [DOI: 10.1039/c5ra22821b] [Citation(s) in RCA: 10] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022] Open
Abstract
Model molecules can be easily loaded into self-healing (bPEI/PAA)*30 MP composite films and endow these films with desired functional properties.
Collapse
Affiliation(s)
- Yanxi Zhu
- State Key Laboratory of Bioelectronics
- School of Biological Science and Medical Engineering
- Southeast University
- Nanjing 210096
- P. R. China
| | - Tao Yin
- State Key Laboratory of Bioelectronics
- School of Biological Science and Medical Engineering
- Southeast University
- Nanjing 210096
- P. R. China
| | - Jiaoyu Ren
- State Key Laboratory of Bioelectronics
- School of Biological Science and Medical Engineering
- Southeast University
- Nanjing 210096
- P. R. China
| | - Cihui Liu
- State Key Laboratory of Bioelectronics
- School of Biological Science and Medical Engineering
- Southeast University
- Nanjing 210096
- P. R. China
| | - Degang Fu
- State Key Laboratory of Bioelectronics
- School of Biological Science and Medical Engineering
- Southeast University
- Nanjing 210096
- P. R. China
| | - Liqin Ge
- State Key Laboratory of Bioelectronics
- School of Biological Science and Medical Engineering
- Southeast University
- Nanjing 210096
- P. R. China
| |
Collapse
|
46
|
Rao Q, Chen K, Wang C. Facile preparation of self-healing waterborne superhydrophobic coatings based on fluoroalkyl silane-loaded microcapsules. RSC Adv 2016. [DOI: 10.1039/c6ra09582h] [Citation(s) in RCA: 24] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022] Open
Abstract
A self-healing waterborne superhydrophobic coating comprising polysiloxane latex, microcapsules, fluorinated silica and photocatalytic titania nanoparticles shows self-repairing ability after mechanical damage or oily contaminations.
Collapse
Affiliation(s)
- Qingqing Rao
- Key Laboratory of Eco-Textile
- Ministry of Education
- School of Textiles & Clothing
- Jiangnan University
- Wuxi
| | - Kunlin Chen
- The Key Laboratory of Food Colloids and Biotechnology
- Ministry of Education
- Jiangnan University
- Wuxi
- P. R. China
| | - Chaoxia Wang
- Key Laboratory of Eco-Textile
- Ministry of Education
- School of Textiles & Clothing
- Jiangnan University
- Wuxi
| |
Collapse
|
47
|
Fang W, Liu L, Li T, Dang Z, Qiao C, Xu J, Wang Y. Electrospun N-Substituted Polyurethane Membranes with Self-Healing Ability for Self-Cleaning and Oil/Water Separation. Chemistry 2015; 22:878-83. [DOI: 10.1002/chem.201504340] [Citation(s) in RCA: 69] [Impact Index Per Article: 7.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/29/2015] [Indexed: 12/17/2022]
Affiliation(s)
- Wenyuan Fang
- Shandong Provincial Key Laboratory of Fine Chemicals; Key Laboratory of Fine Chemicals in Universities of Shandong; Qilu University of Technology; Jinan 250353 P.R. China
| | - Libin Liu
- Shandong Provincial Key Laboratory of Fine Chemicals; Key Laboratory of Fine Chemicals in Universities of Shandong; Qilu University of Technology; Jinan 250353 P.R. China
| | - Ting Li
- Shandong Provincial Key Laboratory of Fine Chemicals; Key Laboratory of Fine Chemicals in Universities of Shandong; Qilu University of Technology; Jinan 250353 P.R. China
| | - Zhao Dang
- Shandong Provincial Key Laboratory of Fine Chemicals; Key Laboratory of Fine Chemicals in Universities of Shandong; Qilu University of Technology; Jinan 250353 P.R. China
| | - Congde Qiao
- Shandong Provincial Key Laboratory of Fine Chemicals; Key Laboratory of Fine Chemicals in Universities of Shandong; Qilu University of Technology; Jinan 250353 P.R. China
| | - Jinku Xu
- Shandong Provincial Key Laboratory of Fine Chemicals; Key Laboratory of Fine Chemicals in Universities of Shandong; Qilu University of Technology; Jinan 250353 P.R. China
| | - Yanyan Wang
- Shandong Provincial Key Laboratory of Fine Chemicals; Key Laboratory of Fine Chemicals in Universities of Shandong; Qilu University of Technology; Jinan 250353 P.R. China
| |
Collapse
|
48
|
Lv LB, Cui TL, Zhang B, Wang HH, Li XH, Chen JS. Wrinkled Graphene Monoliths as Superabsorbing Building Blocks for Superhydrophobic and Superhydrophilic Surfaces. Angew Chem Int Ed Engl 2015; 54:15165-9. [DOI: 10.1002/anie.201507074] [Citation(s) in RCA: 39] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/30/2015] [Revised: 08/27/2015] [Indexed: 01/10/2023]
|
49
|
Lv LB, Cui TL, Zhang B, Wang HH, Li XH, Chen JS. Wrinkled Graphene Monoliths as Superabsorbing Building Blocks for Superhydrophobic and Superhydrophilic Surfaces. Angew Chem Int Ed Engl 2015. [DOI: 10.1002/ange.201507074] [Citation(s) in RCA: 13] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/06/2022]
|
50
|
|