Photochemische Reaktionen als Schlüsselschritte in der Naturstoffsynthese

Visible-Light Promoted Intramolecular para-Cycloadditions on Simple Aromatics

Dearomative cycloadditions are a powerful tool to access a large chemical space exploiting simple and ubiquitous building blocks. The energetic burden due to the loss of aromaticity has however greatly limited their synthetic potential. We devised a general intramolecular method that overcomes these limitations thanks to the photosensitization of allenamides. The visible-light-promoted process gives complex [2.2.2]-(hetero)-bicyclooctadienes at room temperature, likely through the stabilization of transient (bi)radicals by naphthalene. The reaction tolerates several valuable functionalities, offering a convenient handle for a myriad of applications, including original isoindoles and metal complexes.

Arene Activation through Iminium Ions: Product Diversity from Intramolecular Photocycloaddition Reactions

While 2-alk-ω-enyloxy-sustituted benzaldehydes do not display any photochemical reactivity at the arene core, the respective iminium perchlorates were found to undergo efficient reactions either upon direct irradiation (λ=366 nm) or under sensitizing conditions (λ=420 nm, 2.5 mol% thioxanthen-9-one). Three pathways were found: (a) Most commonly, the reaction led to benzoxacyclic products in which the olefin in the tether underwent a formal, yet unprecedented carboformylation (13 examples, 44-99 % yield). The cascade process occurred with high diastereoselectivity and was found to be stereoconvergent. (b) If a substituent resides in the 3-position of the benzene ring, a meta photocycloaddition was observed which produced tetracyclic skeletons with five stereogenic centers in excellent regio- and diastereoselectivity (2 examples, 58-79 % yield). (c) If the tether was internally substituted at the alkene, an arene photocycloaddition was avoided and an azetidine was formed in an aza Paternò-Büchi reaction (2 examples, 95-98 % yield).

Total Synthesis of (-)-Antroalbocin A Enabled by a Strain Release-Controlled Photochemical 1,3-Acyl Shift

The first bioinspired, enantioselective, and protecting group free total synthesis of the antibacterial sesquiterpenoid (-)-antroalbocin A (1) has been achieved in 12 steps (5.4% overall yield) from dimedone. An organocatalytic Robinson annulation gave rapid access to the tricyclic enone (19) as starting material for the photochemical domino process of deconjugation and sigmatropic 1,3-acyl shift. Computational data of this process indicate that the 1,3-acyl shift benefits from the highly strained 1,3-enone 8. The transformation of 8 to its bridged isomer 5 is exergonic and, therefore, enables an increased conversion compared to unstrained substrates.

Dynamic Kinetic Sensitization of β-Dicarbonyl Compounds-Access to Medium-Sized Rings by De Mayo-Type Ring Expansion

Herein, we present a photocatalyzed two-carbon ring expansion of β-dicarbonyl compounds with unactivated olefins that provides facile access to medium-sized rings. Selective sensitization of the substoichiometric enol tautomer enables reactivity of substrates incompatible with the classical De Mayo reaction conditions. Key to success is the identification of the metal-based sensitizer fac-[Ir(CF₃ -pmb)₃ ], which can be excited using common near-visible LEDs, and possesses a high triplet excited state energy of 73.3 kcal mol^-1 . This exactly falls in the range between the triplet energies of the enol and keto tautomer, thereby enabling a dynamic kinetic sensitization. Demonstrating the applicability of fac-[Ir(CF₃ -pmb)₃ ] as a photocatalyst in organic synthesis for the first time, we describe a two-step photocycloaddition-ring-opening cascade with β-ketoesters, -diketones, and -ketoamides. The mechanism has been corroborated by time-resolved spectroscopy, as well as further experimental and computational studies.

Studies on The Application of The Paternò-Büchi Reaction to The Synthesis of Novel Fluorinated Scaffolds

In the context of new scaffolds obtained by photochemical reactions, Paternò-Büchi reactions between heteroaromatic, trifluoromethylphenyl ketone and electron rich alkenes to give oxetanes are described. A comprehensive study has then been carried out on the reaction of aromatic ketones with fluorinated alkenes. Depending on the substitution pattern at the oxetane ring, a metathesis reaction is described as a minor side process to give mono fluorinated alkenes. Overall, this last reaction corresponds to a photo-Wittig reaction and yield amid isosteres. In order to explain the uncommon regioselectivity of the Paternò-Büchi reaction with these alkenes, electrostatic-potential derived charges (ESP) have been determined. In a second computational study, the relative stabilities of the typical 1,4-diradical intermediates of the Paternò-Büchi reaction have been determined. The results well explain the regioselectivity. Further transformations of the oxetanes or previous functionalization of the fluoroalkenes open perspectives for oxetanes as core structures for biologically active compounds.

Advances Towards the Synthesis of Aporphine Alkaloids: C-Ring Formation via Approaches Based on One- and Two-Bond Disconnections

Aporphine compounds constitute a class of substances with important pharmacological properties, including anticancer, antiviral, anti-HIV, anti-inflammatory, and leishmanicidal activities. Consequently, several strategies to obtain the aporphine core have been reported. Herein this review, we provide an overview of two relevant approaches used to construct the C-ring in the synthetic routes developed. The first approach, which is based on a one-bond disconnection, allows C-ring formation using a 1-benzyl-1,2,3,4-tetrahydroisoquinoline intermediate (mainly) employing cyclization reactions catalyzed by metals or promoted by light. The second approach, which is derived from a two-bond disconnection, leads to C-ring formation via a sequence of reactions starting with [4+2] cycloadditions. Through these approaches, aporphinoids with a diverse range of substitution patterns and biological activities can be synthesized.

Concise Total Synthesis of Agarozizanol B via a Strained Photocascade Intermediate

The prezizane-type sesquiterpene agarozizanol B was synthesized employing a photochemical cascade reaction as the key step. Starting from a readily available 1-indanone with a tethered olefin, a strained tetracyclic skeleton was assembled which contained all carbon atoms of the sesquiterpene with the correct relative configuration. The conversion into the tricyclic prezizane skeleton was accomplished by a strategic cyclopropane bond cleavage. Prior to the cyclopropane ring opening an adaption of the oxidation state was required, which could be combined with a reductive resolution step. After removal of two functional groups, the natural product was obtained both in racemic form or, if resolved, as the (+)-enantiomer which was shown to be identical to the natural product.

Direct Activation of a Remote C(sp3 )-H Bond Enabled by a Visible-Light Photosensitized Allene Moiety

Despite allene derivatives have been always regarded as a radical accepter in traditional radical chemistry for decades, the reactivity of allene derivatives under excited state in radical chemistry was rarely explored. Herein, we wish to report an example to engage triplet-excited state of allene moiety as hydrogen-atom-transfer (HAT) partner in the activation of remote sp³ C-H bond via visible-light irradiation under mild reaction conditions with broad substrate scope and good functional-group tolerance. The reaction mechanism involving the generation of triplet excited state of allene derivative and the subsequent HAT process was supported by deuterium labeling, kinetic analysis experiments and DFT calculations.

Strain Release Chemistry of Photogenerated Small-Ring Intermediates

Photochemical processes, such as isomerizations and cycloadditions, have proven to be very useful in the construction of highly strained molecular frameworks. Photoinduced ring strain enables subsequent exergonic reactions which do not require the input of additional chemical energy and provides a variety of attractive synthetic options leading to complex structures. This review covers the progress achieved in the application of sequences combining excitation by ultraviolet light to form strained intermediates, which are further transformed to lower energy products in strain-release reactions. As ring strain is considerable in small ring systems, photogenerated three- and four-membered rings will be covered, mainly focusing on examples from 2000 to May 2020.

Olefin-Supported Cationic Copper Catalysts for Photochemical Synthesis of Structurally Complex Cyclobutanes

The sole method available for the photocycloaddition of unconjugated aliphatic alkenes is the Cu-catalyzed Salomon-Kochi reaction. The [Cu(OTf)]₂ ⋅benzene catalyst that has been standard in this reaction for many decades, however, is air-sensitive, prone to photodecomposition, and poorly reactive towards sterically bulky alkene substrates. Using bench-stable precursors, an improved catalyst system with superior reactivity and photostability has been designed, and it offers significantly expanded substrate scope. The utility of this new catalyst for the preparation of sterically crowded cyclobutane structures is highlighted through the preparation of the cores of the natural products sulcatine G and perforatol.

Flow Photochemistry as a Tool in Organic Synthesis

Photochemical transformations of molecular building blocks have become an important and widely recognized research field in the past decade. Detailed and deep understanding of novel photochemical catalysts and reaction concepts with visible light as the energy source has enabled a broad application portfolio for synthetic organic chemistry. In parallel, continuous-flow chemistry and microreaction technology have become the basis for thinking and doing chemistry in a novel fashion with clear focus on improved process control for higher conversion and selectivity. As can be seen by the large number of scientific publications on flow photochemistry in the recent past, both research topics have found each other as exceptionally well-suited counterparts with high synergy by combining chemistry and technology. This review will give an overview on selected reaction classes, which represent important photochemical transformations in synthetic organic chemistry, and which benefit from mild and defined process conditions by the transfer from batch to continuous-flow mode.

Design of a Multiuse Photoreactor To Enable Visible-Light Photocatalytic Chemical Transformations and Labeling in Live Cells

Despite the growing use of visible-light photochemistry in both chemistry and biology, no general low-heat photoreactor for use across these different disciplines exists. Herein, we describe the design and use of a standardized photoreactor for visible-light-driven activation and photocatalytic chemical transformations. Using this single benchtop photoreactor, we performed photoredox reactions across multiple visible light wavelengths, a high-throughput photocatalytic cross-coupling reaction, and in vitro labeling of proteins and live cells. Given the success of this reactor in all tested applications, we envision that this multi-use photoreactor will be widely used in biology, chemical biology, and medicinal chemistry settings.

Catalytic Enantioselective [2+2] Cycloaddition of α-Halo Acroleins: Construction of Cyclobutanes Containing Two Tetrasubstituted Stereocenters

A catalytic enantioselective formal [2+2] cycloaddition between α-halo acroleins and electronically diverse arylalkenes is described. In the presence of (S)-oxazaborolidinium cation as the catalyst, densely functionalized cyclobutanes containing two vicinal tetrasubstituted stereocenters were produced in high yields and high diastereoselectivities with excellent enantioselectivities. Mechanistic studies revealed that the cis isomer could be transformed into the trans isomer via an enantiocontrolled process. A gram-scale reaction of this catalytic method was used to demonstrate its synthetic potential.

Regulation of an Ambient-Light-Induced Photocyclization Pathway (Norrish-Yang Versus 6π) by Substituent Choice

Photocyclization, irrespective of whether multiple steps (e.g., Norrish-Yang cyclization) or a single concerted step (e.g., 6π photocyclization) are involved, is an intramolecular photochemical process resulting in the formation of one new single bond to afford a ring system. In particular, visible-light-induced photocyclization offers a green and sustainable route to organic cyclic compounds that are difficult to access by thermal reactions. Herein, we describe the ambient light-induced intramolecular photocyclization of a series of donor/acceptor chromophores 1 d-3 d containing two types of photoresponsive motifs, namely an electron-deficient BF₂ -chelated ketone fused with an electron-rich thiophene, and probe the solution-phase and solid-state photochromic performance of these compounds. The results reveal that simple variation of R substituents on the diaryl moiety allows one to control the intramolecular photocyclization mechanism with high photochemical selectivity, e.g., under ambient light, methyl-substituted 1 d and 2 d undergo reversible 6π photocyclization, whereas ethyl-substituted 3 d exclusively undergoes irreversible Norrish-Yang photocyclization. Single-crystal X-ray analysis of Norrish-Yang cyclization products reveals the formation of four pairs of conformational enantiomers differing in the dihedral angle between benzothiophene and the BF₂ core, namely (±)N-3 d@68°, (±)N-3 d@-77°, (±)N-3 d@-78°, and (±)N-3 d@-102°. The UV/Vis absorption spectra of 1 d-3 d cover a broad visible-light region (380-572 nm), while DFT and TD-DFT calculations reveal that absorption in this region is dominated by the charge-transfer (CT) transition from the thiophene-centered HOMO to the LUMO of the electron-deficient π-conjugated BF₂ -chelated unit and the n→π* and π→π* transitions within the latter unit. The spatial separation of the HOMO and LUMO of these dyes promotes triplet-state generation and self-photosensitizes intramolecular photocyclization in the visible-light region. Three-dimensional time-resolved and steady-state emission spectra of 3 d show that the Norrish-Yang photocyclization takes place within milliseconds with excellent conversion efficiency (96 %).

Complex Carbocyclic Skeletons from Aryl Ketones through a Three-Photon Cascade Reaction

Starting from readily available 7-substituted 1-indanones, products with a tetracyclo[5.3.1.01,7 04,11 ]undec-2-ene skeleton were obtained upon irradiation at λ=350 nm (eight examples, 49-67 % yield). The assembly of the structurally complex carbon framework proceeds in a three-photon process comprising an ortho photocycloaddition, a disrotatory [4π] photocyclization, and a di-π-methane rearrangement. The flat aromatic core of the starting material is converted into a functionalized polycyclic hydrocarbon with exit vectors in three dimensions. Ring opening reactions at the central cyclopropane ring were explored, which enable the preparation of tricyclo[5.3.1.04,11 ]undec-2-enes and of tricyclo[6.2.1.01,5 ]undecanes.

N-Heterocyclic Carbene Catalyzed Photoenolization/Diels-Alder Reaction of Acid Fluorides

The combination of light activation and N-heterocyclic carbene (NHC) organocatalysis has enabled the use of acid fluorides as substrates in a UVA-light-mediated photochemical transformation previously observed only with aromatic aldehydes and ketones. Stoichiometric studies and TD-DFT calculations support a mechanism involving the photoactivation of an ortho-toluoyl azolium intermediate, which exhibits "ketone-like" photochemical reactivity under UVA irradiation. Using this photo-NHC catalysis approach, a novel photoenolization/Diels-Alder (PEDA) process was developed that leads to diverse isochroman-1-one derivatives.

Total Syntheses of Xiamycins A, C, F, H and Oridamycin A and Preliminary Evaluation of their Anti-Fungal Properties

Divergent and enantiospecific total syntheses of the indolosesquiterpenoids xiamycins A, C, F, H and oridamycin A have been accomplished. The syntheses, which commence from (R)-carvone, employ a key photoinduced benzannulation sequence to forge the carbazole moiety characteristic of these natural products. Late-stage diversification from a common intermediate enabled the first syntheses of xiamycins C and F, and an unexpected one-pot oxidative decarboxylation, which may prove general, led to xiamycin H. All synthetic intermediates and the natural products were tested for anti-fungal activity. Xiamycin H emerged as an inhibitor of three agriculturally relevant fungal pathogens.