Metal‐Free Triplet Phosphors with High Emission Efficiency and High Tunability

A Photoisomerization-Activated Intramolecular Charge-Transfer Process for Broadband-Tunable Single-Mode Microlasers

Miniaturized lasers with high spectral purity and wide wavelength tunability are crucial for various photonic applications. Here we propose a strategy to realize broadband-tunable single-mode lasing based on a photoisomerization-activated intramolecular charge-transfer (ICT) process in coupled polymer microdisk cavities. The photoisomerizable molecules doped in the polymer microdisks can be quantitatively transformed into a kind of laser dye with strong ICT character by photoexcitation. The gain region was tailored over a wide range through the self-modulation of the optically activated ICT isomers. Meanwhile, the resonant modes shifted with the photoisomerization because of a change in the effective refractive index of the polymer microdisk cavity. Based on the synergetic modulation of the optical gain and microcavity, we realized the broadband tuning of the single-mode laser. These results offer a promising route to fabricate broadband-tunable microlasers towards practical photonic integrations.

Synthesis and Photovoltaic Properties of Boron β-Ketoiminate Dyes Forming a Linear Donor-π-Acceptor Structure

Organoboron complexes are of interest as chromophores for dye sensitizers owing to their light-harvesting and carrier-transporting properties. In this study, compounds containing boron β-ketoiminate (BKI) as a chromophore were synthesized and used as dye sensitizers in dye-sensitized solar cells. The new dyes were orange or red crystals and showed maximum absorptions in the 410-450 nm wavelength region on titanium dioxide substrates. These electrodes exhibited maximum efficiencies of over 80% in incident photon-to-current conversion efficiency spectra, suggesting that the continuous process of light absorption-excitation-electron injection was effectively performed. Open-circuit photovoltages were relatively high owing to the large dipole moments of the BKI dyes with a linear molecular structure. Thus, a maximum power conversion efficiency of 5.3% was successfully observed. Comparison of BKI dyes with boron β-diketonate dyes revealed certain differences in solution stability, spectral properties, and photovoltaic characteristics.

Room-Temperature Phosphorescence from a Series of 3-Pyridylcarbazole Derivatives

Exploration of pure metal-free organic molecules that exhibit strong room-temperature phosphorescence (RTP) is an emerging research topic. In this regard, unveiling the design principles for an efficient RTP molecule is an essential, but challenging, task. A small molecule is an ideal platform to precisely understand the fundamental role of each functional component because the parent molecule can be easily derivatized. Here, the RTP behaviors of a series of 3-pyridylcarbazole derivatives are presented. Experimental studies in combination with theoretical calculations reveal the crucial role of the n orbital on the central pyridine ring in the dramatic enhancement of the intersystem crossing between the charge-transfer-excited singlet state and the locally excited triplet states. Single-crystal X-ray crystallographic studies apparently indicate that both the pyridine ring and fluorine atom contribute to the enhancement of the RTP because of the restricted motion owing to weak C-H⋅⋅⋅N and H⋅⋅⋅F hydrogen-bonding interactions. The single crystal of the fluorine-substituted derivative shows an ultra-long phosphorescent lifetime (τ_P ) of 1.1 s and a phosphorescence quantum yield (Φ_P ) of 1.2 %, whereas the bromine-substituted derivative exhibits τ_P of 0.15 s with a Φ_P of 7.9 %. We believe that this work provides a fundamental and universal guideline for the generation of pure organic molecules exhibiting strong RTP.

Difluoroboron Chelation to Quinacridonequinone: A Synthetic Method for Air-Sensitive 6,13-Dihydroxyquinacridone via Boron Complexes

This study aims to perform the chelation of difluoroboron (BF₂ ) to quinacridonequinone (QQ). The resulting dark green solid was determined to be QA-BF₂ , which is a BF₂ complex of 6,13-dihydroxyquinacridone (QA-OH), and not QQ-BF₂ , which is a BF₂ complex of QQ. This result indicated that QQ-BF₂ was first generated as an O,O-bidentate chelate, which immediately underwent a two-electron reduction to produce QA-BF₂ . This compound was converted to air-sensitive QA-OH by undergoing hydrolysis in argon. Since QA-OH has a strong electron-donating property, it easily produced QQ via air oxidation in the solution. QA-OH also acts as a reducing reagent for quinones. The crystal packing of QA-OH is a herringbone type with short π⋅⋅⋅π contacts, and a good hole mobility has been suggested by theoretical calculations. Herein, a new synthetic method from QQ to QA-OH using BF₂ chelation and hydrolysis was proposed. QA-BF₂ and QA-OH are useful organic functional pigments and reducing reagents.

Revealing the Origins of Mechanically Induced Fluorescence Changes in Organic Molecular Crystals

Mechanofluorochromic molecular materials display a change in fluorescence color through mechanical stress. Complex structure-property relationships in both the crystalline and amorphous phases of these materials govern both the presence and strength of this behavior, which is usually deemed the result of a mechanically induced phase transition. However, the precise nature of the emitting species in each phase is often a matter of speculation, resulting from experimental data that are difficult to interpret, and a lack of an acceptable theoretical model capable of capturing complex environmental effects. With a combined strategy using sophisticated experimental techniques and a new theoretical approach, here the varied mechanofluorochromic behavior of a series of difluoroboron diketonates is shown to be driven by the formation of low-energy exciton traps in the amorphous phase, with a limited number of traps giving rise to the full change in fluorescence color. The results highlight intrinsic structural links between crystalline and amorphous phases, and how these may be exploited for further development of powerful mechanofluorochromic assemblies, in line with modern crystal engineering approaches.

Synthesis and fluorescence properties of some difluoroboron β-diketonate complexes and composite containing PMMA

A series of difluoroboron β-diketonate complexes, containing the indon-β-diketonate ligand carrying methyl or methoxyl substituents was synthesized. The crystal structures of the complexes were confirmed by single crystal X-ray diffraction studies. The fluorescence properties of compounds were studied in solution state, solid state and on PMMA polymer matrix. The photophysical data of compounds 2a-2d exhibited strong fluorescence and photostability under the ultraviolet light (Hg lamp). The complex 2b showed higher fluorescence intensity in solution state as compared to other complexes of the series. The complexes 2c and 2d showed higher fluorescence intensity in the solid state, which are ascribed to the stronger π-π interactions between ligands in the solid state. The introduction of methoxyl or methyl groups on the benzene rings enhanced the absorption intensity, emission intensity, quantum yields and fluorescence lifetimes due to their electron-donating nature. Furthermore, the complex 2b was doped into the PMMA to produce hybrid materials, where the PMMA matrix acted as sensitizer for the central boron ion to enhance the fluorescence emission intensity and quantum yields.

Room-Temperature Phosphorescence in Pure Organic Materials: Halogen Bonding Switching Effects

Organic room-temperature phosphorescence (ORTP), when combined with external stimuli-responsive capability, is very attractive for sensors and bio-imaging devices, but remains challenging. Herein, by doping two β-iminoenamine-BF₂ derivatives (S-2CN and S-2I) into a 4-iodoaniline (I-Ph-NH₂ ) crystalline matrix, the formation of S-2CN⋅⋅⋅I-Ph-NH₂ and S-2I⋅⋅⋅I-Ph-NH₂ halogen bonds leads to bright-red RTP emissions from these two host-guest doped crystals (hgDCs) with quantum efficiencies up to 13.43 % and 15.96 %, respectively. Upon treatment with HCl, the competition of I-Ph-NH₂ ⋅HCl formation against S-2I⋅⋅⋅I-Ph-NH₂ halogen bonding switches off the red RTP from S-2I/I-Ph-NH₂ hgDCs, whereas the stable halogen-bonded S-2CN⋅⋅⋅I-Ph-NH₂ ensures red RTP from S-2CN/I-Ph-NH₂ hgDCs remains unchanged. A security protection luminescence pattern by using these different HCl-responsive RTP behaviors was designed.

Triple-Mode Emission of Carbon Dots: Applications for Advanced Anti-Counterfeiting

Photoluminescence (PL), up-conversion PL (UCPL), and phosphorescence are three kinds of phenomena common to light-emitting materials, but it is very difficult to observe all of them simultaneously when they are derived from a single material at room temperature. For the first time, triple-mode emission (that is, PL, UCPL, and room temperature phosphorescence (RTP)) is reported, which relies on a composite of the luminescent carbon dots (CDs) prepared from m-phenylenediamine and poly(vinyl alcohol) (PVA). Moreover, the CDs-PVA aqueous dispersion is nearly colorless and demonstrates promise as a triple-mode emission ink in the field of advanced anti-counterfeiting.

Tailoring Oxygen Sensitivity with Halide Substitution in Difluoroboron Dibenzoylmethane Polylactide Materials

The dual-emissive properties of solid-state difluoroboron β-diketonate-poly(lactic acid) (BF2bdkPLA) materials have been utilized for biological oxygen sensing. In this work, BF2dbm(X)PLA materials were synthesized, where X = H, F, Cl, Br, and I. The effects of changing the halide substituent and PLA polymer chain length on the optical properties in dilute CH2Cl2 solutions and solid-state polymer films were studied. These luminescent materials show fluorescence, phosphorescence, and lifetime tunability on the basis of molecular weight, as well as lifetime modulation via the halide substituent. Short BF2dbm(Br)PLA (6.0 kDa) and both short and long BF2dbm(I)PLA polymers (6.0 or 20.3 kDa) have fluorescence and intense phosphorescence ideal for ratiometric oxygen sensing. The lighter halide-dye polymers with hydrogen, fluorine, and chlorine substitution have longer phosphorescence lifetimes and can be utilized as ultrasensitive oxygen sensors. Photostability was also analyzed for the polymer films.

Oxygen Sensing Difluoroboron Dinaphthoylmethane Polylactide

Dual emissive luminescence properties of solid-state difluoroboron β-diketonate-poly(lactic acid) (BF2bdk-PLA) materials have been utilized as biological oxygen sensors. Dyes with red-shifted absorption and emission are important for multiplexing and in vivo imaging, thus hydroxyl-functionalized dinaphthoylmethane initiators and dye-PLA conjugates BF2dnm(X)PLA (X = H, Br, I) with extended conjugation were synthesized. The luminescent materials show red-shifted absorbance (~435 nm) and fluorescence tunability by molecular weight. Fluorescence colors range from yellow (~530 nm) in 10 - 12 kDa polymers to green (~490 nm) in 20 - 30 kDa polymers. Room-temperature phosphorescence (RTP) and thermally activated delayed fluorescence (TADF) are present under a nitrogen atmosphere. For the iodine-substituted derivative, BF2dnm(I)PLA, clearly distinguishable fluorescence (green) and phosphorescence (orange) peaks are present, making it ideal for ratiometric oxygen-sensing and imaging. Bromide and hydrogen analogues with weaker relative phosphorescence intensities and longer phosphorescence lifetimes can be used as highly sensitive, concentration independent, lifetime-based oxygen sensors or for gated emission detection. BF2dnm(I)PLA nanoparticles were taken up by T41 mouse mammary cells and successfully demonstrated differences in vitro ratiometric measurement of oxygen.

Synthesis, structure prediction, pharmacokinetic properties, molecular docking and antitumor activities of some novel thiazinone derivatives

Convenient synthesis of [1,3]thiazin-4-ones by the unprecedented cyclization of acetylene diesters with 3-alkyl-2,6-diarylpiperidin-4-one thiosemicarbazone derivatives and their antitumor evaluation.