Hydrierung von Estern zu Alkoholen mit einem definierten Eisenkomplex

Utilizing Design of Experiments Approach to Assess Kinetic Parameters for a Mn Homogeneous Hydrogenation Catalyst

Homogeneous hydrogenation catalysts based on metal complexes provide a diverse and highly tunable tool for the fine chemical industry. To fully unleash their potential, fast and effective methods for the evaluation of catalytic properties are needed. In turn, this requires changes in the experimental approaches to test and evaluate the performance of the catalytic processes. Design of experiment combined with statistical analysis can enable time- and resource-efficient experimentation. In this work, we employ a set of different statistical models to obtain the detailed kinetic description of a highly active homogeneous Mn (I) ketone hydrogenation catalyst as a representative model system. The reaction kinetics were analyzed using a full second order polynomial regression model, two models with eliminated parameters and finally a model which implements "chemical logic". The coefficients obtained are compared with the corresponding high-quality kinetic parameters acquired using conventional kinetic experiments. We demonstrate that various kinetic effects can be well captured using different statistical models, providing important insights into the reaction kinetics and mechanism of a complex catalytic reaction.

Hydrogenative Depolymerization of End-of-Life Polycarbonates by an Iron Pincer Complex

Chemical recycling processes can contribute to a resource-efficient plastic economy. Herein, a procedure for the iron-catalyzed hydrogenation of the carbonate function of end-of-life polycarbonates under simultaneous depolymerization is presented. The use of a straightforward iron pincer complex leads to high rate of depolymerization of poly(bisphenol A carbonate) and poly(propylene carbonate) yielding the monomers bisphenol A and 1,2-propanediol, respectively, as products under mild reaction conditions. Furthermore, the iron complex was able to depolymerize polycarbonates containing goods and mixture of plastics containing polycarbonates.

Hydrogenation of Polyesters to Polyether Polyols

The amount of plastic waste is continuously increasing. Besides conventional recycling, one solution to deal with this problem could be to use this waste as a resource for novel materials. In this study, polyesters are hydrogenated to give polyether polyols by using in situ-generated Ru-Triphos catalysts in combination with Lewis acids. The choice of Lewis acid and its concentration relative to the ruthenium catalyst are found to determine the selectivity of the reaction. Monitoring of the molecular weight during the reaction confirms a sequential mechanism in which the diols that are formed by hydrogenation are etherified to the polyethers. To probe the applicability of this tandem hydrogenation etherification approach, a range of polyester substrates is investigated. The oligoether products that form in these reactions have the chain lengths that are appropriate for application in the adhesives and coatings industries. This strategy makes polyether polyols accessible that are otherwise difficult to obtain from conventional fossil-based feedstocks.

Iron-PNP-Pincer-Catalyzed Transfer Dehydrogenation of Secondary Alcohols

The well-defined iron PNP pincer complex catalyst [Fe(H)(BH₄ )(CO)(HN{CH₂ CH₂ P(iPr)₂ }₂ ] was used for the catalytic dehydrogenation of secondary alcohols to give the corresponding ketones. Using acetone as inexpensive hydrogen acceptor enables the oxidation with good to excellent yields. DFT computations indicate an outer-sphere mechanism and support the importance of an acceptor to achieve this transformation under milder conditions.

Base-Free Iron Catalyzed Transfer Hydrogenation of Esters Using EtOH as Hydrogen Source

Herein, we report on the use of the iron pincer complex Iron-MACHO-BH, in the base-free transfer hydrogenation of esters with EtOH as a hydrogen source. More than 20 substrates including aromatic and aliphatic esters and lactones were reduced affording the desired primary alcohols and diols with moderate to excellent isolated yields. It is also possible to reduce polyesters to the diols with this method, enabling a novel way of plastic recycling. Reduction of the renewable substrate methyl levulinate proceeds to form 1,4-pentanediol directly. The yields are largely governed by the equilibrium between the alcohol and the ethyl ester.

Hydrogenation of CO2 -Derived Carbonates and Polycarbonates to Methanol and Diols by Metal-Ligand Cooperative Manganese Catalysis

The first base-metal-catalysed hydrogenation of CO₂ -derived carbonates to alcohols is presented. The reaction proceeds under mild conditions in the presence of a well-defined manganese complex with a loading as low as 0.25 mol %. The non-precious-metal homogenous catalytic system provides an indirect route for the conversion of CO₂ into methanol with the co-production of value-added (vicinal) diols in yields of up to 99 %. Experimental and computational studies indicate a metal-ligand cooperative catalysis mechanism.

Ultrafast Iron-Catalyzed Reduction of Functionalized Ketones: Highly Enantioselective Synthesis of Halohydrines, Oxaheterocycles, and Aminoalcohols

A molecularly defined chiral boxmi iron alkyl complex catalyzes the hydroboration of various functionalized ketones and provides the corresponding chiral halohydrines, oxaheterocycles (oxiranes, oxetanes, tetrahydrofurans, and dioxanes) and amino alcohols with excellent enantioselectivities (up to >99 %ee) and conversion efficiencies at low catalyst loadings (as low as 0.5 mol %). Turnover frequencies of greater than 40000 h^-1 at -30 °C highlight the activity of this earth-abundant metal catalyst which tolerates a large number of functional groups.

Mechanism-Based Enantiodivergence in Manganese Reduction Catalysis: A Chiral Pincer Complex for the Highly Enantioselective Hydroboration of Ketones

A manganese alkyl complex containing a chiral bis(oxazolinyl-methylidene)isoindoline pincer ligand is a precatalyst for a catalytic system of unprecedented activity and selectivity in the enantioselective hydroboration of ketones, thus producing preparatively useful chiral alcohols in excellent yields with up to greater than 99 % ee. It is applicable for both aryl alkyl and dialkyl ketone reduction under mild reaction conditions (TOF >450 h^-1 at -40 °C). The earth-abundant base-metal catalyst operates at very low catalyst loadings (as low as 0.1 mol %) and with a high level of functional-group tolerance. There is evidence for the existence of two distinct mechanistic pathways for manganese-catalyzed hydride transfer and their role for enantiocontrol in the selectivity-determining step is presented.

Non-Pincer-Type Manganese Complexes as Efficient Catalysts for the Hydrogenation of Esters

Catalytic hydrogenation of carboxylic acid esters is essential for the green production of pharmaceuticals, fragrances, and fine chemicals. Herein, we report the efficient hydrogenation of esters with manganese catalysts based on simple bidentate aminophosphine ligands. Monoligated Mn PN complexes are particularly active for the conversion of esters into the corresponding alcohols at Mn concentrations as low as 0.2 mol % in the presence of sub-stoichiometric amounts of KOt Bu base.

Hydrogenation of Esters to Alcohols Catalyzed by Defined Manganese Pincer Complexes

The first manganese-catalyzed hydrogenation of esters to alcohols has been developed. The combination of Mn(CO)₅ Br with [HN(CH₂ CH₂ P(Et)₂ )₂ ] leads to a mixture of cationic and neutral Mn PNP pincer complexes, which enable the reduction of various ester substrates, including aromatic and aliphatic esters as well as diesters and lactones. Notably, related pincer complexes with isopropyl or cyclohexyl substituents showed very low activity.

Direct Hydrogenation of Biobased Carboxylic Acids Mediated by a Nitrogen-centered Tridentate Phosphine Ligand

A novel nitrogen-centered tridentate ligand was identified from a series of multidentate ligands and applied for the direct hydrogenation of 9 biogenic acids into alcohols, lactones and esters with high yields. Comparison of substrates and ruthenium precursors suggested that the Ru(II) hydride cationic species was more active to transform acids than the corresponding lactone or esters.