Highly selective and sensitive determination of doxycycline integrating enrichment with thermosensitive magnetic molecular imprinting nanomaterial and carbon dots based fluorescence probe

Doxycycline (DOX), a typical tetracycline antibiotic, is widely used because of its excellent antibacterial activity. To develop effective method for DOX has attracted much more attention. Herein, a new detection technology integrating magnetic solid phase extraction (MSPE) based on thermosensitive magnetic molecularly imprinted polymers (T-MMIPs) and fluorescence spectrometry based on carbon dots (CDs) was established. Thermosensitive magnetic molecularly imprinted polymers (T-MMIPs) was designed for selective enrichment of trace DOX. The synthesized T-MMIPs showed excellent selectivity for DOX. The adsorption performance of T-MMIPs varied with temperature in different solvents, which could achieve the enrichment and rapid desorption of DOX. In addition, the synthesized CDs had stable fluorescent property and better water-solubility, and the fluorescence of CDs was significantly quenched by DOX due to the internal filtration effect (IFE). Under the optimized conditions, the method resulted in good linearity over the range from 0.5 to 30 μg L-1, and the limit of detection was 0.2 μg L-1. The constructed detection technology was validated with real water samples, and excellent spiked recoveries from 92.5 % to 105.2 % were achieved. These data clearly indicated that the proposed technology was rapid, highly selective, environmentally friendly, and possessed significant potential application and development prospects.

Electrochemical Detection of Femtomolar DNA via Boronate Affinity-Mediated Decoration of Polysaccharides with Electroactive Tags

In view of their high efficiency and cost-effectiveness, polymers are of great promise as carriers for signal tags in amplified detection. Herein, we present a polysaccharide-amplified method for the electrochemical detection of a BRCA1 breast cancer gene-derived DNA target at the femtomolar levels. Briefly, peptide nucleic acid (PNA) with a complementary sequence was tethered as the capture probe for the DNA target, to which carboxyl group-containing polysaccharides were then attached via facile phosphate-Zr(IV)-carboxylate crosslinking, followed by the decoration of polysaccharide chains with electroactive ferrocene (Fc) signal tags via affinity coupling between a cis-diol site and phenylboronic acid (PBA) group. As the polysaccharide chain contains hundreds of cis-diol sites, boronate affinity can enable the site-specific decoration of each polysaccharide chain with hundreds of Fc signal tags, efficiently transducing each target capture event into the decoration of many Fc signal tags. As polysaccharides are cheap, renewable, ubiquitous, and biodegradable natural biopolymers, the use of polysaccharides for signal amplification offers the benefits of high efficiency, cost-effectiveness, excellent biocompatibility, and environmental friendliness. The linear range of the polysaccharide-amplified method for DNA detection was demonstrated to be from 10 fM to 10 nM (R² = 0.996), with the detection limit as low as 2.9 fM. The results show that this method can also discriminate single base mismatch with satisfactory selectivity and can be applied to DNA detection in serum samples. In view of these merits, the polysaccharide-amplified PNA-based electrochemical method holds great promise in DNA detection with satisfactory sensitivity and selectivity.

Boronate-Affinity Cross-Linking-Based Ratiometric Electrochemical Detection of Glycoconjugates

Despite the widespread application of the boronate-affinity cross-linking (BAC) in the separation, enrichment, and sensing of glycoconjugates, it remains a huge challenge to integrate the BAC into the selective electrochemical detection of glycoconjugates due to the poor selectivity of the BAC. Herein, we demonstrate a BAC-based ratiometric electrochemical method for the simple, low-cost, and highly sensitive and selective detection of glycoconjugates. Briefly, the methylene blue (MB)-tagged nucleic acid aptamer is exploited as the recognition element to selectively capture target glycoconjugate, to which a large number of ferrocene (Fc) tags are subsequently labeled via the BAC between the phenylboronic acid (PBA) group and the cis-diol site of the oligosaccharide chains on the captured targets. Using the MB tag as the internal reference and the Fc tag as the reporter of the target capture, the dual-signal output enables the ratiometric detection. Due to the presence of a high density of the cis-diol sites on a glycoconjugate, sufficiently high sensitivity can be obtained even without using any amplification strategies. Using glycoprotein mucin 1 (MUC1) as the model target, the signal ratio (I_Fc/I_MB) exhibits good linearity over the range from 0.05 to 50 U/mL, with a detection limit of 0.021 U/mL. In addition to the high sensitivity and selectivity, the results of the analysis of MUC1 in serum samples are acceptable. By virtue of its simplicity, cost-effectiveness, and high robustness and reproducibility, this BAC-based ratiometric electrochemical method holds great promise in the highly sensitive and selective detection of glycoconjugates.

Copolymer-Based Fluorescence Nanosensor for In Situ Imaging of Homocysteine in the Liver and Kidney of Diabetic Mice

Homocysteine (Hcy) is one of the important biomarkers of clinical diagnosis, which is closely related to the occurrence and development of many diseases. Current analysis methods have difficulties in detecting Hcy in cells and living organisms. As a powerful technique, fluorescence methods combined the laser confocal imaging technology can achieve real-time visual tracking in cells and in vivo. Herein, we establish a conjugated copolymer-based fluorescence nanosensor (DPA-PFNP-Cu(II)) using the connected 2,7-dibromofluorene and 4,7-bis (2-bromothiophen-5-yl)-2-1-3-benzothiadiazole as the main chain. The competitive coordination between Hcy and Cu(II) allows the fluorescence of the polymer off to on. Finally, the nanosensor is applied for in situ imaging of Hcy levels in the kidney and liver of diabetic mice and is found that Hcy levels were positively correlated with the degree of diabetes. Notably, the depth of tissue penetration of the nanosensor enables Hcy detection of the liver and kidney through in vivo imaging without damage. Two-photon imaging and in vivo imaging achieve consistent results, which correct each other, improving the accuracy of the test result. The present works provide a new imaging technique for studying the occurrence and development of diabetes and screening of new drugs for treatment at the living level.

Fluorescent Labelling of Glycans with FRET-Based Probes in a Gold(III)-Mediated Three-Component Coupling Reaction

Single-site multifunctionalization of glycans is of importance in biological studies considering its crucial role in mediating biological events and human diseases. In this paper, a novel approach for multifunctional labelling of glycans has been developed featuring the use of fluorescence resonance energy transfer-based (FRET-based) probes for fluorescent labelling of glycans through a gold(III)-mediated three-component coupling reaction. Oxidation of glycans into aldehydes followed by the A³ -coupling reaction with FRET-based probes resulted in the single-site formation of fluorescent propargylamine products. The conversion of labelled glycans can be revealed by ratiometric analysis of the FRET signals. This labelling approach results in multifunctionalization of glycans with high selectivity and conversion between 66 and 69 %.

Towards Detection of Glycoproteins Using Molecularly Imprinted Nanoparticles and Boronic Acid-Modified Fluorescent Probe

Glycoproteins represent a group of important biomarkers for cancer and other life-threatening diseases. Selective detection of specific glycoproteins is an important step for early diagnosis. Traditional glycoprotein assays are mostly based on lectins, antibodies, and enzymes, biochemical reagents that are costly and require special cold chain storage and distribution. To address the shortcomings of the existing glycoprotein assays, we propose a new approach using protein-imprinted nanoparticles to replace the traditional lectins and antibodies. Protein-imprinted binding sites were created on the surface of silica nanoparticles by copolymerization of dopamine and aminophenylboronic acid. The imprinted nanoparticles were systematically characterized by dynamic light scattering, scanning and transmission electron microscopy, thermogravimetric analysis, Fourier transform infrared spectroscopy, and elemental analysis. A boronic acid-modified fluorescent probe was used to detect the target glycoprotein captured by the imprinted nanoparticles. Using horseradish peroxidase as a model glycoprotein, we demonstrated that the proposed method can be applied to detect target protein containing multiple glycosylation sites. Because of their outstanding stability and low cost, imprinted nanoparticles and synthetic probes are attractive replacements of traditional biochemical reagents to develop simpler, faster, and more cost-effective analytical methods for glycoproteins.

A biomimetic fluorescent nanosensor based on imprinted polymers modified with carbon dots for sensitive detection of alpha-fetoprotein in clinical samples

A biomimetic fluorescent nanosensor based on molecularly imprinted polymers modified with carbon dots (CDs@MIPs) has been prepared for rapid, selective and sensitive detection of alpha-fetoprotein (AFP) in clinical samples.

Recent development of boronic acid-based fluorescent sensors

As Lewis acids, boronic acids can bind with 1,2- or 1,3-diols in aqueous solution reversibly and covalently to form five or six cyclic esters, thus resulting in significant fluorescence changes. Based on this phenomenon, boronic acid compounds have been well developed as sensors to recognize carbohydrates or other substances. Several reviews in this area have been reported before, however, novel boronic acid-based fluorescent sensors have emerged in large numbers in recent years. This paper reviews new boron-based sensors from the last five years that can detect carbohydrates such as glucose, ribose and sialyl Lewis A/X, and other substances including catecholamines, reactive oxygen species, and ionic compounds. And emerging electrochemically related fluorescent sensors and functionalized boronic acid as new materials including nanoparticles, smart polymer gels, and quantum dots were also involved. By summarizing and discussing these newly developed sensors, we expect new inspiration in the design of boronic acid-based fluorescent sensors.

As Lewis acids, boronic acids can bind with 1,2- or 1,3-diols in aqueous solution reversibly and covalently to form five or six cyclic esters, thus resulting in significant fluorescence changes.

An antibody-free assay for simultaneous capture and detection of glycoproteins by surface enhanced Raman spectroscopy

A single-step reaction, antibody-free assay for simultaneous capture and detection of glycoproteins by SERS spectroscopy.

Fluorometric probing of the lipase level as acute pancreatitis biomarkers based on interfacially controlled aggregation-induced emission (AIE)

As a sudden inflammation of the pancreas, acute pancreatitis presents severe complications and a high mortality rate, despite treatment. Lipase in serum serves as an essential biomarker of acute pancreatitis and even pancreatic cancer. Therefore, developing robust, convenient and sensitive probing of lipase levels is greatly needed. In this work, we present glutamate functionalized tetraphenylethylene (TPE) as a "turn-on" fluorescent probe (S1) based on the aggregation-induced emission (AIE) mechanism for lipase levels with new recognition units. In heterogeneous media, the hydrophilic amino and carboxyl groups in the probe were specifically introduced to facilitate its full access to lipase at the oil-water interface and achieve an interfacially controlled AIE process. The linear response of fluorescence ranging from 0 to 80 U L-1, which included the concentration range of the lipase level in human serum, considering the dilution factor if necessary, the limit of detection as low as 0.13 U L-1, and the fast response time (7 min) were determined. The value of the apparent Michaelis-Menten constant (Km) was obtained as 4.23 μM, which indicated superior affinity between lipase and the probe molecule. The selectivity, photostability, dynamic monitoring of the enzymatic reaction, and preliminary commercial enzyme activity screening were summarized. As far as we know, this is the fastest, easiest and most sensitive method for lipase level probing in the reported literature. Finally, probing the lipase level for the first time in real human serum samples was also conducted successfully.

Molecularly Imprinted Nanogels Acquire Stealth In Situ by Cloaking Themselves with Native Dysopsonic Proteins

Protein corona formation was regulated on the surface in vivo by molecular imprinting to enable polymeric nanogels to acquire stealth upon intravenous administration. Albumin, the most abundant protein in blood, was selected as a distinct protein component of protein corona for preparing molecularly imprinted nanogels (MIP-NGs) to form an albumin-rich protein corona. Intravital fluorescence resonance energy transfer imaging of rhodamine-labeled albumin and fluorescein-conjugated MIP-NGs showed that albumin was captured by MIP-NGs immediately after injection, forming an albumin-rich protein corona. MIP-NGs circulated in the blood longer than those of non-albumin-imprinted nanogels, with almost no retention in liver tissue. MIP-NGs also passively accumulated in tumor tissue. These data suggest that this strategy, based on regulation of the protein corona in vivo, may significantly influence the development of drug nanocarriers for cancer therapy.

Fabrication of Surface Protein-Imprinted Biofuel Cell for Sensitive Self-Powered Glycoprotein Detection

Glycoproteins are important biomarkers and therapeutic targets in clinical diagnostics. The conventional analytical methods for glycoprotein are usually faced with some challenges, such as the complex pretreatment of samples, poor availability, and limited stability of antibody, making them not suitable for point-of-care and on-site application. Herein, we demonstrate a novel miniaturized biofuel cells (BFCs)-based self-powered nanosensor for the specific and sensitive determination of glycoproteins in complex samples through the combination of boronate-affinity molecularly imprinted polymer (MIP) and the boronate affinity functionalized biliroxidase-carbon nanotube nanocomposites. The above MIP and the nanocomposites act as both signal probe and biocatalyst at the cathode. The as-obtained self-powered MIP-BFC-based biosensor can detect horseradish peroxidase (a type of glycoprotein) with a wide linear range of 1 ng/mL to 10 μg/mL and a very low detection limit of 1 ng/mL. Especially, it shows high tolerance for different interferences (e.g., sugars and other glycoproteins) and can even measure the α-fetoprotein level in serum samples. Moreover, it exhibits significant advantages over the conventional assays in terms of cost efficiency, stability, and speed, especially inexpensive instrument needed. Our novel approach for construction of the sensor paves a simple and economical way to fabricate portable devices for point-of-care and on-site application.

Molecular imprinting: perspectives and applications

This critical review presents a survey of recent developments in technologies and strategies for the preparation of MIPs, followed by the application of MIPs in sample pretreatment, chromatographic separation and chemical sensing.

A fluorescence active gold nanorod–quantum dot core–satellite nanostructure for sub-attomolar tumor marker biosensing

The accurate monitoring of trace cancer biomarkers is crucial for the early diagnosis of cancer.